Cu/TiO2 adsorbents modified by air plasma for adsorption-oxidation of H2S.

In this study, non-thermal plasma (NTP) was employed to modify the Cu/TiO2 adsorbent to efficiently purify H2S in low-temperature and micro-oxygen environments. The effects of Cu loading amounts and atmospheres of NTP treatment on the adsorption-oxidation performance of the adsorbents were investigated. The NTP modification successfully boosted the H2S removal capacity to varying degrees, and the optimized adsorbent treated by air plasma (Cu/TiO2-Air) attained the best H2S breakthrough capacity of 113.29 mg H2S/gadsorbent, which was almost 5 times higher than that of the adsorbent without NTP modification. Further studies demonstrated that the superior performance of Cu/TiO2-Air was attributed to increased mesoporous volume, more exposure of active sites (CuO) and functional groups (amino groups and hydroxyl groups), enhanced Ti-O-Cu interaction, and the favorable ratio of active oxygen species. Additionally, the X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) results indicated the main reason for the deactivation was the consumption of the active components (CuO) and the agglomeration of reaction products (CuS and SO42-) occupying the active sites on the surface and the inner pores of the adsorbents.

Study of plasma activated water effect on heavy metal bioaccumulation by Cannabis sativa Using Laser-Induced Breakdown Spectroscopy.

Contamination of the environment with toxic metals such as cadmium or lead is a worldwide issue. The accumulator of metals Cannabis sativa L. has potential to be utilized in phytoremediation, which is an environmentally friendly way of soil decontamination. Novel non-thermal plasma-based technologies may be a helpful tool in this process. Plasma activated water (PAW), prepared by contact of gaseous plasma with water, contains reactive oxygen and nitrogen species, which enhance the growth of plants. In this study, C. sativa was grown in a short-term toxicity test in a medium which consisted of plasma activated water prepared by dielectric barrier discharge with liquid electrode and different concentrations of cadmium or lead. Application of PAW on heavy metal contaminated C. sativa resulted in increased growth under Pb contamination as was determined by ecotoxicology tests. Furthermore, the PAW influence on the bioaccumulation of these metals as well as the influence on the nutrient composition of plants was studied primarily by applying Laser-induced breakdown spectroscopy (LIBS). The LIBS elemental maps show that C. sativa accumulates heavy metals mainly in the roots. The results present a new proof-of-concept in which PAW could be used to improve the growth of plants in heavy metal contaminated environment, while LIBS can be implemented to study the phytoremediation efficiency.

Efficient degradation of p-nitrophenol from water by enhancing dielectric barrier discharge (DBD) plasma through ozone circulation: Optimization, kinetics and mechanism.

Non-thermal dielectric barrier discharge (DBD) plasma has received great attention for degradation of persistent organic pollutants such as p-nitrophenol (PNP). However, the feasibility of the DBD implementation is not clear due to its high energy consumption and relatively low degradation efficiency. In this research, a novel strategy was suggested based on re-circulation of the generated O3 in the DBD system to enhance the PNP degradation efficiency and energy yield. The potential mechanism and possible pathway of PNP degradation were studied by EPR, ESR, DFT and GS-MS analytical tests. According to the results, the PNP degradation efficiency and energy yield increased from 57.4% to 94.4% and from 0.52 to 1.18 g kW-1h-1, respectively through ozone circulation into the DBD reactor. This was due to the more release of long-lived and short-lived reactive species (ROS) in the DBD-O3 system by the O3 circulation. The variations in pH (4-10), initial concentration (50-90 mg L-1), and the presence of co-existing substances in the water matrix had minimal impact on the DBD-O3 system, in comparison to the conventional system. The biological toxicity evaluation revealed that the hybrid DBD-O3 system transform PNP to less toxic intermediates. This study proposes a promising strategy to improve the utilization of DBD for the degradation of PNP.

A rapid prototyped atmospheric non-thermal plasma-activated aerosol device and anti-bacterial characterisation.

Non-plasma technologies are being extensively investigated for their potential to mitigate microbial growth through the production of various reactive species. Predominantly, studies utilise atmospheric non-thermal plasma to produce plasma-activated liquids. The advancement of plasma-liquid applications has led to the investigation of plasma-activated aerosols (PAAs). This study aimed to produce a rapid-prototyped plasma-activated aerosol setup and perform chemical and anti-bacterial characterisation on the resultant activated aerosols. The setup was produced using stereolithography 3D printing, and air was used as the carrier gas. The novel design of the device allowed for the direct production of PAAs without the prior generation of plasma-activated water and subsequent aerosolisation. The generated PAAs were assessed for nitrite, hydrogen peroxide and ozone content using colourimetric assays. Anti-bacterial efficacy was tested against three human pathogenic strains: Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Salmonella enterica. It was observed that nitrite and ozone contact concentration increased with exposure time, yet no hydrogen peroxide was detected. The generated PAAs showed significant zones of no growth for all bacterial strains. These devices, therefore, show potential to be used as anti-bacterial disinfection technologies.

Design of double Z-scheme Ag-Ag3O4/CuO-CuFe2O4 magnetic nanophotocatalyst via starch-templated microwave-combustion hybrid precipitation method and modified with corona-plasma: Remediation of dye contaminants.

Herein, the novel double Z-scheme Ag-Ag3O4/CuO-CuFe2O4 magnetic nanophotocatalyst with nanosphere-on-nanosheet-like morphology was synthesized via the corona-plasma-assisted starch-templated microwave-combustion-precipitation method to remove the dye pollutants. The CuO-CuFe2O4 meso/macroporous nanophotocatalyst was synthesized using a one-pot-stage combustion-microwave process with/without starch as a hard-template. Subsequently, surface modification was carried out by DC corona-plasma discharge technology at various voltages, namely 500, 1000 and 1500 V. Then, the Ag3O4 photocatalyst was deposited on the CuO-CuFe2O4 fabricated with starch-hard-template and treated with 1000 V corona-plasma (denoted as: Ag-Ag3O4/CuO-CuFe2O4 (Starch) 1000 P). The properties of the synthesized nanophotocatalysts were analyzed using various techniques, including X-ray diffraction (XRD), Diffuse reflectance spectroscopy (DRS), Transmission electron microscopy (TEM), Field emission scanning electron microscopy (FESEM), Brunauer-Emmett-Teller and Barrett-Joyner-Halenda (BET-BJH), Vibrating Sample Manetometer (VSM), and Photoluminescence (PL). The XRD analysis corroborated the presence of CuO, CuFe2O4 and Ag3O4 in the structure of all samples. The BET-BJH analysis indicates that the specific surface area of the Ag-Ag3O4/CuO-CuFe2O4 (Starch) 1000 P nanophotocatalyst as the best sample is 2 m2/g, higher than other samples. Additionally, the DRS analysis revealed that the band gap of the Ag-Ag3O4/CuO-CuFe2O4 (Starch) 1000 P nanophotocatalyst is about 1.68 eV with the surface plasmon resonance. The performance of the ternary heterostructured Ag-Ag3O4/CuO-CuFe2O4 (Starch) 1000 P nanophotocatalyst was 96.2% and 89.1% in the degradation of the crystal violet (10 mg/L) and acid orange 7 (10 mg/L), respectively, proving its outstanding degradation capacity.

Skin treatment with non-thermal plasma modulates the immune system through miR-223-3p and its target genes.

Non-thermal plasma, a partially ionized gas, holds significant potential for clinical applications, including wound-healing support, oral therapies, and anti-tumour treatments. While its applications showed promising outcomes, the underlying molecular mechanisms remain incompletely understood. We thus apply non-thermal plasma to mouse auricular skin and conducted non-coding RNA sequencing, as well as single-cell blood sequencing. In a time-series analysis (five timepoints spanning 2 hours), we compare the expression of microRNAs in the plasma-treated left ears to the unexposed right ears of the same mice as well as to the ears of unexposed control mice. Our findings indicate specific effects in the treated ears for a set of five miRNAs: mmu-miR-144-5p, mmu-miR-144-3p, mmu-miR-142a-5p, mmu-miR-223-3p, and mmu-miR-451a. Interestingly, mmu-miR-223-3p also exhibits an increase over time in the right non-treated ear of the exposed mice, suggesting systemic effects. Notably, this miRNA, along with mmu-miR-142a-5p and mmu-miR-144-3p, regulates genes and pathways associated with wound healing and tissue regeneration (namely ErbB, FoxO, Hippo, and PI3K-Akt signalling). This co-regulation is particularly remarkable considering the significant seed dissimilarities among the miRNAs. Finally, single-cell sequencing of PBMCs reveals the downregulation of 12 from 15 target genes in B-cells, Cd4+ and Cd8+ T-cells. Collectively, our data provide evidence for a systemic effect of non-thermal plasma.

Effect of nanodiamonds surface deposition on hydrophilicity, bulk degradation andin-vitrocell adhesion of 3D-printed polycaprolactone scaffolds for bone tissue engineering.

This study was designed to deposit nanodiamonds (NDs) on 3D-printed poly-ϵ-caprolactone (PCL) scaffolds and evaluate their effect on the surface topography, hydrophilicity, degradation, andin-vitrocell adhesion compared to untreated PCL scaffolds. The PCL scaffold specimens were 3D-printed by fused deposition modeling (FDM) technique with specific porosity parameters. The 3D-printed specimens' surfaces were modified by NDs deposition followed by oxygen plasma post-treatment using a plasma focus device and a non-thermal atmospheric plasma jet, respectively. Specimens were evaluated through morphological characterization by field emission scanning electron microscope (FESEM), microstructure characterization by Raman spectroscopy, chemical characterization by Fourier transform infrared (FTIR) spectroscopy, hydrophilicity degree by contact angle and water uptake measurements, andin-vitrodegradation measurements (n= 6). In addition,in-vitrobone marrow mesenchymal stem cells adhesion was evaluated quantitatively by confocal microscopy and qualitatively by FESEM at different time intervals after cell seeding (n= 6). The statistical significance level was set atp⩽ 0.05. The FESEM micrographs, the Raman, and FTIR spectra confirmed the successful surface deposition of NDs on scaffold specimens. The NDs treated specimens showed nano-scale features distributed homogeneously across the surface compared to the untreated ones. Also, the NDs treated specimens revealed a statistically significant smaller contact angle (17.45 ± 1.34 degrees), higher water uptake percentage after 24 h immersion in phosphate buffer saline (PBS) (21.56% ± 1.73), and higher degradation rate after six months of immersion in PBS (43.92 ± 0.77%). Moreover, enhanced cell adhesion at all different time intervals was observed in NDs treated specimens with higher nuclei area fraction percentage (69.87 ± 3.97%) compared to the untreated specimens (11.46 ± 1.34%). Surface deposition of NDs with oxygen-containing functional groups on 3D-printed PCL scaffolds increased their hydrophilicity and degradation rate with significant enhancement of thein-vitrocell adhesion compared to untreated PCL scaffolds.

The Potential of Cold Atmospheric Pressure Plasmas for the Direct Degradation of Organic Pollutants Derived from the Food Production Industry.

Specialized chemicals are used for intensifying food production, including boosting meat and crop yields. Among the applied formulations, antibiotics and pesticides pose a severe threat to the natural balance of the ecosystem, as they either contribute to the development of multidrug resistance among pathogens or exhibit ecotoxic and mutagenic actions of a persistent character. Recently, cold atmospheric pressure plasmas (CAPPs) have emerged as promising technologies for degradation of these organic pollutants. CAPP-based technologies show eco-friendliness and potency for the removal of organic pollutants of diverse chemical formulas and different modes of action. For this reason, various types of CAPP-based systems are presented in this review and assessed in terms of their constructions, types of discharges, operating parameters, and efficiencies in the degradation of antibiotics and persistent organic pollutants. Additionally, the key role of reactive oxygen and nitrogen species (RONS) is highlighted. Moreover, optimization of the CAPP operating parameters seems crucial to effectively remove contaminants. Finally, the CAPP-related paths and technologies are further considered in terms of biological and environmental effects associated with the treatments, including changes in antibacterial properties and toxicity of the exposed solutions, as well as the potential of the CAPP-based strategies for limiting the spread of multidrug resistance.

Effects of chemically-reductive trace gas contaminants on non-thermal plasma inactivation of an airborne virus.

Transmission of airborne infectious diseases poses great risk for public health and socio-economic stability, thus, there is a need for an effective control method targeting the spread and transmission of pathogenic aerosols. The existence of chemically-reductive trace air contaminants in animal agriculture may affect the oxidation inactivation process of pathogens. In this study, we report how the presence of such gasses impacts the effectiveness of using non-thermal plasma (NTP) within a packed-bed dielectric barrier discharge reactor to inactivate MS2 bacteriophage. Inactivation of the aerosolized bacteriophage is determined by the combination of viability and polymerase chain reaction assays. Using a plasma power source with a voltage of 20 kV and frequency of 350 Hz, after differentiating and excluding the physical removal effects of viral aerosols potentially caused by plasma, the baseline inactivation of MS2 aerosol in air has been determined based on an overall air flow rate of 200 Liters per minute and plasma discharge power of 1.8 W. When either ammonia or hydrogen sulfide gas is introduced into the airstream at a concentration of 1 part per million, the NTP virus inactivation efficiency is reduced to around 0.5-log from the 1-log baseline inactivation in air alone. Higher concentrations of those gasses will not further inhibit the effectiveness of plasma inactivation.

Rapid synthesis of ZnO nanoparticles via gliding arc discharge: unveiling the impact of discharge time on particle properties and photocatalytic performance.

Herein, we present a novel approach for the synthesis of ZnO nanoparticles (ZnO NPs) using a non-thermal plasma source generated by the gliding arc discharge-air system. The effect of discharge time on the physical and optical properties, as well as the photocatalytic performance of the as-fabricated ZnO NPs, was investigated. The characterization techniques revealed that the as-synthesized ZnO exhibit hexagonal Wurtzite structure, with a wide energy gap and peak intensities of UV-vis absorption with longer discharge times. A decrease in particle size from 29 to 25 nm was also observed with increasing discharge time, while all samples were thermally stable between 25 and 700 °C. The photocatalytic performance of the ZnO NPs was evaluated by degrading Congo Red (CR) dye with a concentration of 20 ppm under sunlight at a dose of 1 mg/mL. The as-synthesized ZnO NPs revealed exceptional photocatalytic performance by degrading ~ 97% of CR dye after irradiation for 150 min. This work presents an easy and simple method for synthesizing NPs in a short time and pave the way for other potential ideas on the application of plasma gliding arc discharge.

Synergistic effect on simultaneous treatment of Cr(VI) and chloramphenicol using a non-thermal plasma technology.

Toxic organic and heavy metal contaminants commonly exist in industrial waste stream(s) and treatment is of great challenge. In this study, a dielectric barrier discharge (DBD) non-thermal plasma technology was employed for the simultaneous treatment of two important contaminants, chloramphenicol (CAP) and Cr(VI) in an aqueous solution through redox transformations. More than 70% of CAP and 20% of TOC were degraded in 60 min, while Cr(VI) was completely removed in 10 min. The hydroxyl radicals were the main active species for the degradation. Meanwhile, the consumption of hydroxyl radicals was beneficial to the reduction of Cr(VI). The synergistic effect was investigated between CAP degradation and Cr(VI) reduction. The reduction of Cr(VI) would be enhanced in the presence of CAP with a low concentration and could be inhibited under a high concentration, because part of hydroxyl radicals could be consumed by the low-concentration CAP and the obtained intermediates with a higher kinetic rate. However, CAP with a high concentration could react with such reductive species as eaq- and •H, which could compete with Cr(VI) and inhibit the reduction. In addition, the presence of Cr(VI) enhanced the degradation and mineralization of CAP; the study of obtained intermediates indicated that the presence of Cr(VI) changed the degradation path of CAP as Cr(VI) would react with reductive species, enhance the generation of hydroxyl radicals, and cause more hydroxylation reactions. Moreover, the mechanism for the simultaneous redox transformations of CAP and Cr(VI) was illustrated. This study indicates that the DBD non-thermal plasma technology can be one of better solutions for simultaneous elimination of heavy metal and organic contaminants in aquatic environments.

Degradation mechanism and decomposition of sulfamethoxazole aqueous solution with persulfate activated by dielectric barrier discharge.

The present study focused on the degradation of sulfamethoxazole (SMX) aqueous solution and the toxicity of processing aqueous by the dielectric barrier discharge (DBD) activated persulfate (PS). The effects of input voltage, input frequency, duty cycle, and PS dosage ratio on the SMX degradation efficiency were measured. Based on the results of the Response Surface Methodology (RSM), SMX degradation efficiency reached 83.21% which is 10.54% higher than that without PS, and the kinetic constant was 0.067 min-1 in 30 min when the input voltage at 204 V (input power at 110.6 W), the input frequency at 186 Hz, the duty cycle at 63%, and the PS dosage ratio at 5.1:1. The addition of PS can produce more active particles reached 1.756 mg/L (O3), 0.118 mg/L (H2O2), 0.154 mmol/L (·OH) in 30 min. Furthermore, the DBD plasma system effectively activated an optimal amount of PS, leading to improved removal efficiency of COD, and TOC to 30.21% and 47.21%, respectively. Subsequently, eight primary by-products were pinpointed, alongside the observation of three distinct pathways of transformation. Predictions from the ECOSAR software indicated that most of the degradation intermediates were less toxic than SMX. The biological toxicity experiments elucidated that the treatment with the DBD/PS system effectively reduced the mortality of zebrafish larvae caused by SMX from 100% to 20.13% and improved the hatching rate from 55.69% to 80.86%. In particular, it is important to note that the degradation intermediates exhibit teratogenic effects on zebrafish larvae.

Degradation of o-dichlorobenzene by DBD-NTP co-modified titanium gel catalyst.

In order to study the degradation process of dioxins in industrial flue gas, the decomposition of o-dichlorobenzene (o-DCB) in a DBD plasma catalytic reactor was investigated. The results showed that an NTP-catalyzed system, especially using the CuMnTiOx catalyst, had better o-DCB degradation performance compared to plasma alone. The combination of the CuMnTiOx catalyst with NTP can achieve a degradation efficiency of up to 97.2% for o-DCB; the selectivity of CO and CO2 and the carbon balance were 40%, 45%, and 85%, respectively. The dielectric constant and electrical property results indicated that the surface discharge capacity of the catalysts played a major role in the degradation of o-DCB, and a higher dielectric constant could suppress the plasma expansion and enhance the duration of the plasma discharge per discharge cycle. According to the O1s XPS and O2-TPD results, the conversion of CO to CO2 follows the M-v-K mechanism; thus, the active species on the catalyst surface play an important role. Moreover, the CuMnTiOx and NTP mixed system exhibited excellent stability, which is probably because Cu doping improved the lifetime of the catalyst. This work can provide an experimental and theoretical basis for research in the degradation of o-DCB by plasma catalyst systems.

Elimination of Chlorella using peracetic acid activated by dielectric barrier discharge plasma: Mechanism and cell deactivation process.

Excessive proliferation of algae in water depletes dissolved oxygen, resulting in the demise of aquatic life and environmental damage. This study delves into the effectiveness of the dielectric barrier discharge (DBD) plasma activated peracetic acid (PAA) system in deactivating Chlorella. Within 15 min, the algae removal effectiveness reached 89 % under ideal trial conditions. DBD plasma activation of PAA augmented the concentration of reactive species such as ·OH, 1O2, and organic radicals (RO·) in the solution, which are involved in the process of cell inactivation. Reactive oxygen species (ROS) within Chlorella cells continued to rise as a result of treatment-induced damage to the morphological structure and cell membrane of the organism. DNA and chlorophyll-a (Chl-a), were oxidized and destroyed by these invasive active compounds. This study presents an efficient advanced oxidation method to destroy algal cells and adds an alternative strategy for algal control in areas where eutrophication occurs.

Exploring the effects of non-thermal plasma pre-treatment on coriander (Coriander sativum L.) seed germination efficiency.

This study investigates the effects of non-thermal plasma (NTP) treatment on the germination characteristics of coriander seeds (Coriandrum sativum L.). Different germination factors, water imbibition rate and changes in mass, were analyzed. The results indicate that a suitable duration of NTP treatment (180 s and 300 s) enhances seed germination characteristics, whereas prolonged exposure (420 s) leads to adverse effects. Furthermore, shorter NTP exposures (180 s) improved water absorption and surface properties of seeds, while longer exposures (420 s) caused mass loss and compromised seed vigor. Overall, the findings demonstrate the significance of optimizing NTP treatment conditions for enhancing seed germination characteristics.

Microgreens and novel non-thermal seed germination techniques for sustainable food systems: a review.

There are a number of cutting-edge techniques implemented in the germination process, including high pressure processing, ultrasonic, ultraviolet, light, non-thermal plasma, magnetic field, microwave radiation, electrolyzed oxidizing water, and plasma activated water. The influence of these technological advances on seed germination procedure is addressed in this review. The use of these technologies has several benefits, including the enhancement of plant growth rate and the modulation of bioactive chemicals like ABA, protein, and peroxidase concentrations, as well as the suppression of microbial development. Microgreens' positive health effects, such as their antioxidant, anticancer, antiproliferative/pro-oxidant, anti-obesity, and anti-inflammatory properties are extensively reviewed. The phytochemical and bioactive components of microgreens were investigated, including the concentrations of vitamin K, vitamin C, vitamin E, micro and macro nutrients, pro-vitamin A, polyphenols, and glucosinolates. Furthermore, the potential commercial uses of microgreens, as well as the current market transformation and prospects for the future are explored.

Exploring Non-Thermal Plasma and UV Radiation as Biofilm Control Strategies against Foodborne Filamentous Fungal Contaminants.

In recent years, non-thermal plasma (NTP) has emerged as a promising tool for decontamination and disinfection within the food industry. Given the increasing resistance of microbial biofilms to conventional disinfectants and their adverse environmental effects, this method has significant potential for eliminating biofilm formation or mitigating the metabolic activity of grown biofilms. A comparative study was conducted evaluating the efficacy of UV radiation and NTP in eradicating mature biofilms of four common foodborne filamentous fungal contaminants: Alternaria alternata, Aspergillus niger, Fusarium culmorum, and Fusarium graminearum. The findings reveal that while UV radiation exhibits variable efficacy depending on the duration of exposure and fungal species, NTP induces substantial morphological alterations in biofilms, disrupting hyphae, and reducing extracellular polymeric substance production, particularly in A. alternata and F. culmorum. Notably, scanning electron microscopy analysis demonstrates significant disruption of the hyphae in NTP-treated biofilms, indicating its ability to penetrate the biofilm matrix, which is a promising outcome for biofilm eradication strategies. The use of NTP could offer a more environmentally friendly and potentially more effective alternative to traditional disinfection methods.

Floating electrode-dielectric barrier discharge-based plasma promotes skin regeneration in a full-thickness skin defect mouse model.

Wound healing involves a complex and dynamic interplay among various cell types, cytokines, and growth factors. Macrophages and transforming growth factor-ß1 (TGF-ß1) play an essential role in different phases of wound healing. Cold atmospheric plasma has a wide range of applications in the treatment of chronic wounds. Hence, we aimed to investigate the safety and efficacy of a custom-made plasma device in a full-thickness skin defect mouse model. Here, we investigated the wound tissue on days 6 and 12 using histology, qPCR, and western blotting. During the inflammation phase of wound repair, macrophages play an important role in the onset and resolution of inflammation, showing decreased F4/80 on day 6 of plasma treatment and increased TGF-ß1 levels. The plasma-treated group showed better epidermal epithelialization, dermal fibrosis, collagen maturation, and reduced inflammation than the control group. Our findings revealed that floating electrode-dielectric barrier discharge (FE-DBD)-based atmospheric-pressure plasma promoted significantly faster wound healing in the plasma-treated group than that in the control group with untreated wounds. Hence, plasma treatment accelerated wound healing processes without noticeable side effects and suppressed pro-inflammatory genes, suggesting that FE-DBD-based plasma could be a potential therapeutic option for treating various wounds.

Parametric investigation and RSM optimization of DBD plasma methods (direct & indirect) for H2S conversion in the air.

Hydrogen sulfide (H2S) is known as a harmful pollutant for the environment and human health, and its emission control is a high priority. Non-thermal plasma is an effective technology in this field. In this study, for the first time, the performance of direct and indirect H2S plasma conversion methods was compared, optimized, and modeled with the CCD method. H2S was diluted in zero air, and the study investigated the effect of discharge power, relative humidity, total flow rate, initial H2S concentration, and their interactions. ANOVA results showed that the models for H2S conversion efficiency and energy yield were significant and efficient. The direct method achieved a maximum conversion efficiency of 56 % and energy yield of 3.43 g/kWh, while the indirect method produced 68 % conversion efficiency and 1.59 g/kWh energy yield. According to the process optimization results, the direct conversion method is more optimal than the indirect conversion method due to the presence of active species and high-energy electrons in the plasma treatment, and it is a better choice if there are suitable working conditions.

Non-Thermal Plasma Reduces HSV-1 Infection of and Replication in HaCaT Keratinocytes In Vitro.

Herpes simplex virus type 1 (HSV-1) is a lifelong pathogen characterized by asymptomatic latent infection in the trigeminal ganglia (TG), with periodic outbreaks of cold sores caused by virus reactivation in the TG and subsequent replication in the oral mucosa. While antiviral therapies can provide relief from cold sores, they are unable to eliminate HSV-1. We provide experimental results that highlight non-thermal plasma (NTP) as a new alternative therapy for HSV-1 infection that would resolve cold sores faster and reduce the establishment of latent infection in the TG. Additionally, this study is the first to explore the use of NTP as a therapy that can both treat and prevent human viral infections. The antiviral effect of NTP was investigated using an in vitro model of HSV-1 epithelial infection that involved the application of NTP from two separate devices to cell-free HSV-1, HSV-1-infected cells, and uninfected cells. It was found that NTP reduced the infectivity of cell-free HSV-1, reduced viral replication in HSV-1-infected cells, and diminished the susceptibility of uninfected cells to HSV-1 infection. This triad of antiviral mechanisms of action suggests the potential of NTP as a therapeutic agent effective against HSV-1 infection.