Surface Development of Polyethylene Terephthalate Films Using Low-Pressure, High-Frequency Argon + Oxygen Plasma on Zinc Powder for Dye-Sensitized Solar Cells.

This research has developed a process for producing ZnO thin film from DEZn deposited onto a PET substrate with low-pressure, high-frequency Ar + O2 plasma using a chemical vapor deposition technique. The aim is to study the film production conditions that affect electrical properties, optical properties, and thin film surfaces. This work highlights the use of plasma energy produced from a mixture of gases between Ar + O2. Plasma production is stimulated by an RF power supply to deliver high chemical energy and push ZnO atoms from the cathode inside the reactor onto the substrate through surface chemical reactions. The results showed that increasing the RF power in plasma production affected the chemical reactions on the substrate surface of film formations. Film preparation at an RF power of 300 W will result in the thickest films. The film has a continuous columnar formation, and the surface has a granular structure. This results in the lowest electrical resistivity of 1.8 × 10-4 Ω. In addition, when fabricated into a DSSC device, the device tested the PCE value and showed the highest value at 5.68%. The reason is due to the very rough surface nature of the ZnO film, which increases the scattering and storage of sunlight, making cells more efficient. Therefore, the benefit of this research is that it will be a highly efficient prototype of thin film production technology using a chemical process that reduces production costs and can be used in the industrial development of solar cells.

NiO-Incorporated Cu/Cu2O Nanowires for Highly Efficient Electrochemical Nitrate Reduction to Ammonia.

Electrochemical nitrate reduction to ammonia (NRA) is a promising sustainable way to synthesize ammonia (NH3) from nitrate (NO3-) contaminants. Cu-based electrocatalysts are frequently utilized for NRA due to their strong NO3- adsorption and de-oxygenation ability. However, this kind of catalyst usually possesses the weak water dissociation ability, resulting in insufficient proton supply in alkaline media to retard the following hydrogenation step of O-containing intermediates (*NOx, typically NO2-) to target NH3. Herein, NiO-incorporated Cu/Cu2O nanowires grown on nickel foam (p-CuNi@NF, p refers to plasma treatment) were synthesized via hydrothermal growth and subsequent O2 plasma treatment for efficient NRA electrocatalysis. On this p-CuNi@NF catalyst, NiO is able to accelerate the hydrogenation step by promoting the water dissociation to provide protons, ultimately facilitating efficient NRA. p-CuNi@NF exhibits excellent NH3 selectivity and yield in a wide potential range and reaches a high Faradaic efficiency (FENH3) of 97.5% and a yield (YNH3) of 470 µmol h-1 cm-2 at -0.6 V, both of which largely surpass the Cu/Cu2O catalyst.

Interface Engineering Induced Multi-Scale Self-Assembly NiFe-LDH Heterostructures for High-Performance Water Electrolysis.

Confronted with the pressing issue of energy scarcity, the development of an economical and potent bifunctional catalyst is of paramount importance. We adopt an interface engineering strategy to modify the surface of NiFe-LDH nanoplates with O2 plasma treatment. This process enhances the local electric field of NiFe-LDH, resulting in the formation of a self-assembled polycrystalline nanowire array on the nanoplate surface. After O2 plasma treatment for 30 min, the NiFe-LDH-P30 not only formed a heterostructure with rough surface, but also regulated the exposure of crystal surfaces. Due to the strong interface coupling between the self-assembled 3D nanoflowers, 2D nanoplates and 1D nanowires, the NiFe-LDH-P30 exhibits an excellent structural stability. Moreover, it demonstrated exceptional HER and OER activities in alkaline condition, achieving a low overpotentials of 154 mV and 242 mV at 10 mA cm-2, respectively. Furthermore, NiFe-LDH-P30 as the dual-electrode material for the cathode and anode in the process of water splitting results in a low voltage of 1.63 V at a current density of 10 mA cm-2. Through the strategic application of interface engineering, this work has pioneered a novel approach to the creation of transition metal-based electrocatalysts, which is benefit to a range of practical energy applications.

The Influence of UV-Ozone, O2 Plasma, and CF4 Plasma Treatment on the Droplet-Based Deposition of Diamond Nanoparticles.

Surface treatment is critical for homogeneous coating over a large area and high-resolution patterning of nanodiamond (ND) particles. To optimize the interaction between the surface of a substrate and the colloid of ND particles, it is essential to remove hydrocarbon contamination by surface treatment and to increase the surface energy of the substrate, hence improving the diamond film homogeneity upon its deposition. However, the impact of substrate surface treatment on the properties of coatings and patterns is not fully understood. This study explores the impact of UV-ozone, O2 plasma, and CF4 plasma treatments on the wetting properties of the fused silica glass substrate surface. We identify the optimal time interval between the treatment and subsequent ND coating/patterning processes, which were conducted using inkjet printing and ultrasonic spray coating techniques. Our results showed that UV-ozone and O2 plasma resulted in hydrophilic surfaces, while CF4 plasma treatment resulted in hydrophobic surfaces. We demonstrate the use of CF4 plasma treatment before inkjet printing to generate high-resolution patterns with dots as small as 30 µm in diameter. Ultrasonic spray coating showed homogeneous coatings after using UV-ozone and O2 plasma treatment. The findings of this study provide valuable insights into the hydrocarbon airborne contamination on cleaned surfaces over time even in clean-room environments and have a notable impact on the performance of liquid coatings and patterns. We highlight the importance of timing between the surface treatment and printing in achieving high resolution or homogeneity.

SnS2/MoS2 van der Waals Heterostructure Photodetector with Ultrahigh Responsivity Realized by a Photogating Effect.

Photoresponsivity is a fundamental parameter used to quantify the ability of photoelectric conversion of a photodetector device. High-responsivity photodetectors are essential for numerous optoelectronic applications. Due to the strong light-matter interactions and the high carrier mobility, two-dimensional (2D) materials are promising candidates for the next-generation photodetectors. However, poor light absorption, lack of photoconductive gain, and the interfacial recombination lead to the relatively low responsivity of 2D photodetectors. The photogating effect, which extends the lifetime of photoexcited carriers, provides a simple approach to enhance responsivity in photodetector devices. Here, the O2 plasma treatment introduced surface traps on the SnS2 surface, leading to a gate-tunable photogating effect in SnS2/MoS2 heterojunctions. The heterojunction device exhibits an ultrahigh responsibility of up to 28 A/W. Moreover, the photodetector possesses a wide spectral photoresponse spanning from 300 to 1100 nm and a high specific detectivity (D*) of 4 × 1011 Jones under a 532 nm laser at VDS = 1 V. These results demonstrate that O2 plasma treatment is an efficient and simple avenue to achieve photogating effects, which can be employed to enhance the performance of van der Waals heterostructure photodetector devices and make them suitable for future integration into advanced electronic and optoelectronic systems.

Unraveling Exclusive In-Plasma Initiated Oxidation Processes Occurring at Polymeric Surfaces upon O2 Admixtures to Medium Pressure Ar and N2 DBD Treatments.

Polymeric surfaces have been increasingly plasma-activated to adopt adequate chemistries, enabling their use in different applications. An unavoidable surface oxygen insertion upon exposure to non-oxygen-containing plasmas was always observed and mainly attributed to in-plasma oxidation stemming from O2 impurities in plasma reactors. Therefore, this work investigates exclusive in-plasma oxidation processes occurring on polyethylene surfaces by purposely admixing different O2 concentrations to medium-pressure Ar and N2 dielectric barrier discharges (base pressure: 10-7 kPa). Hence, distinctive optical emission spectroscopy and in-situ X-ray photoelectron spectroscopy (XPS) data were carefully correlated. Pure N2 discharge triggered an unprecedented surface incorporation of large nitrogen (29%) and low oxygen (3%) amounts. A steep rise in the O-content (10%) at the expense of nitrogen (15%) was detected upon the addition of 6.2 × 10-3% of O2 to the feed gas. When the added O2 exceeded 1%, the N content was completely quenched. Around 8% of surface oxygen was detected in Ar plasma due to high-energy Ar metastables creating more surface radicals that reacted with O2 impurities. When adding only 6.2 × 10-3% of O2 to Ar, the surface O content considerably increased to 12%. Overall, in-plasma oxidation caused by O2 impurities can strikingly change the surface chemistry of N2 and Ar plasma-treated polymers.

Poly(styrene sulfonic acid)-Grafted Carbon Black Synthesized by Surface-Initiated Atom Transfer Radical Polymerization.

Owing to their excellent electrical conductivity and robust mechanical properties, carbon-based nanocomposites are being used in a wide range of applications and devices, such as electromagnetic wave interference shielding, electronic devices, and fuel cells. While several approaches have been developed for synthesizing carbon nanotubes and carbon-black-based polymer nanocomposites, most studies have focused on the simple blending of the carbon material with a polymer matrix. However, this results in uncontrolled interactions between the carbon filler and the polymer chains, leading to the agglomeration of the carbon filler. Herein, we report a new strategy for synthesizing sulfonated polystyrene (PSS)-grafted carbon black nanoparticles (NPs) via surface-initiated atom-transfer radical polymerization. Treatments with O2 plasma and H2O2 result in the effective attachment of the appropriate initiator to the carbon black NPs, thus allowing for the controlled formation of the PSS brushes. The high polymeric processability and desirable mechanical properties of the PSS-grafted carbon black NPs enable them suitable for use in nonfluorinated-hydrocarbon-based polymer electrolyte membranes for fuel cells, which must exhibit high proton conductivity without interrupting the network of channels consisting of ionic clusters (i.e., sulfonic acid moieties).

Electrical Stimulation of Human Adipose-Derived Mesenchymal Stem Cells on O2 Plasma-Treated ITO Glass Promotes Osteogenic Differentiation.

Electrical signals represent an essential form of cellular communication. For decades, electrical stimulation has been used effectively in clinical practice to enhance bone healing. However, the detailed mechanisms between electrical stimulation and bone healing are not well understood. In addition, there have been many difficulties in setting up a stable and efficient electrical stimulation system within the in vitro environment. Therefore, various conductive materials and electrical stimulation methods have been tested to establish an effective electrical stimulation system. Through these systems, many studies have been conducted on the effects of electrical stimulation on bone healing and osteogenic differentiation. However, previous studies were limited by the use of opaque conductive materials that obscure the cells; fluorescent observations and staining are known to be two of the critical methods to confirm the states of the cells. Indium tin oxide (ITO) glass is known to have excellent transparency and conductivity, but it is challenging to cultivate cells due to low cell adhesion characteristics. Therefore, we used O2 plasma treatment to increase the hydrophilicity and wettability of ITO glass. This enhanced cell affinity to the glass, providing a stable surface for the cells to attach. Then, electrical stimulation was applied with an amplitude range of 10 to 200 µA at a frequency of 10 Hz. Our results demonstrated that the osteogenic differentiation efficiency was maximized under the amplitude conditions of 10 µA and 50 µA. Accordingly, the results of our study suggest the development of an excellent platform in the field of biological research as a good tool to elucidate various mechanisms of cell bioactivity under electrical conditions.

A Biocompatibility Study of Plasma Nanocoatings onto Cobalt Chromium L605 Alloy for Cardiovascular Stent Applications.

The objective of this study was to evaluate the biocompatibility of trimethylsilane (TMS) plasma nanocoatings modified with NH3/O2 (2:1 molar ratio) plasma post-treatment onto cobalt chromium (CoCr) L605 alloy coupons and stents for cardiovascular stent applications. Biocompatibility of plasma nanocoatings was evaluated by coating adhesion, corrosion behavior, ion releasing, cytotoxicity, and cell proliferation. Surface chemistry and wettability were studied to understand effects of surface properties on biocompatibility. Results show that NH3/O2 post-treated TMS plasma nanocoatings are hydrophilic with water contact angle of 48.5° and have a typical surface composition of O (39.39 at.%), Si (31.92 at.%), C (24.12 at.%), and N (2.77 at.%). The plasma nanocoatings were conformal to substrate surface topography and had excellent adhesion to the alloy substrates, as assessed by tape test (ASTM D3359), and showed no cracking or peeling off L605 stent surfaces after dilation. The plasma nanocoatings also improve the corrosion resistance of CoCr L605 alloy by increasing corrosion potential and decreasing corrosion rates with no pitting corrosion and no mineral adsorption layer. Ion releasing test revealed that Co, Cr, and Ni ion concentrations were reduced by 64-79%, 67-69%, and 57-72%, respectively, in the plasma-nanocoated L605 samples as compared to uncoated L605 control samples. The plasma nanocoatings showed no sign of cytotoxicity from the test results according to ISO 10993-05 and 10993-12. Seven-day cell culture demonstrated that, in comparison with the uncoated L605 control surfaces, the plasma nanocoating surfaces showed 62 ± 7.3% decrease in porcine coronary artery smooth muscle cells (PCASMCs) density and had comparable density of porcine coronary artery endothelial cells (PCAECs). These results suggest that TMS plasma nanocoatings with NH3/O2 plasma post-treatment possess the desired biocompatibility for stent applications and support the hypothesis that nanocoated stents could be very effective for in-stent restenosis prevention.

Ultrastable Interfacial Contacts Enabling Unimpeded Charge Transfer and Ion Diffusion in Flexible Lithium-Ion Batteries.

Deteriorating interfacial contact under mechanical deformation induces large cracks and high charge transfer resistance, resulting in a severe capacity fading of flexible lithium-ion batteries (LIBs). Herein, an oxygen plasma treatment on a polymer separator combined with high-speed centrifugal spraying to construct ultrastable interfacial contacts is reported. With the treatment, abundant hydrophilic oxygen-containing functional groups are produced and ensure strong chemical adhesion between the separator and the active materials. With single walled carbon nanotubes (SWCNTs) sprayed onto the active materials, a dense thin film is formed as the current collector. Meanwhile, the centrifugal force caused by high-speed rotation together with van der Waals forces under fast evaporation produces a much closer interface between the current collector and the active materials. As a result of this ultrastable interfacial interaction, the integrated electrode shows no structural failure after 5000 bending cycles with the charge-transfer resistance as low as 35.8% and a Li-ion diffusion coefficient nearly 19 times of the untreated electrode. Flexible LIBs assembled with these integrated electrodes show excellent structural and electrochemical stability, and can work steadily under various deformed states and repeated bending. This work provides a new technique toward rational design of electrode configuration for flexible LIBs.

Surface Modification of Bamboo Charcoal by O2 Plasma Treatment and UV-Grafted Thermo-Sensitive AgNPs Hydrogel to Improve Antibacterial Properties in Biomedical Application.

With the advancement of science and modern medical technology, more and more medical materials and implants are used in medical treatment and to improve human life. The safety of invasive medical materials and the prevention of infection are gradually being valued. Therefore, avoiding operation failure or wound infection and inflammation caused by surgical infection is one of the most important topics in current medical technology. Silver nanoparticles (AgNPs) have minor irritation and toxicity to cells and have a broad-spectrum antibacterial effect without causing bacterial resistance and other problems. They are also less toxic to the human body. Bamboo charcoal (BC) is a bioinert material with a porous structure, light characteristics, and low density, like bone quality. It can be used as a lightweight bone filling material. However, it does not have any antibacterial function. This study synthesized AgNPs under the ultraviolet (UV) photochemical method by reducing silver nitrate with sodium citrate. The formation and distribution of AgNPs were confirmed by UV-visible spectroscopy and X-ray diffraction measurement (XRD). The BC was treated by O2 plasma to increase the number of polar functional groups on the surface. Then, UV light-induced graft polymerization of N-isopropyl acrylamide (NIPAAm) and AgNPs were applied onto the BC to immobilize thermos-/antibacterial composite hydrogels on the BC surface. The structures and properties of thermos-/antibacterial composite hydrogel-modified BC surface were characterized by Scanning Electron Microscopy (SEM), Fourier Transform Infrared spectrum (FT-IR), and X-ray photoelectron spectroscopy (XPS). The results show that thermos-/antibacterial composite hydrogels were then successfully grafted onto BC. SEM observations showed that the thermos-/antibacterial composite hydrogels formed a membrane structure between the BC. The biocompatibility of the substrate was evaluated by Alamar Blue cell viability assay and antibacterial test in vitro.

Synthesis and Characterization of a Novel Biocompatible Alloy, Ti-Nb-Zr-Ta-Sn.

Many current-generation biomedical implants are fabricated from the Ti-6Al-4V alloy because it has many attractive properties, such as low density and biocompatibility. However, the elastic modulus of this alloy is much larger than that of the surrounding bone, leading to bone resorption and, eventually, implant failure. In the present study, we synthesized and performed a detailed analysis of a novel low elastic modulus Ti-based alloy (Ti-28Nb-5Zr-2Ta-2Sn (TNZTS alloy)) using a variety of methods, including scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and tensile test. Additionally, the in vitro biocompatibility of the TNZTS alloy was evaluated using SCP-1, SaOs-2, and THP-1 cell lines and primary human osteoblasts. Compared to Ti-6Al-4V, the elastic modulus of TNZTS alloy was significantly lower, while measures of its in vitro biocompatibility are comparable. O2 plasma treatment of the surface of the alloy significantly increased its hydrophilicity and, hence, its in vitro biocompatibility. TNZTS alloy specimens did not induce the release of cytokines by macrophages, indicating that such scaffolds would not trigger inflammatory responses. The present results suggest that the TNZTS alloy may have potential as an alternative to Ti-6Al-4V.

Ion-Enhanced Etching Characteristics of sp2-Rich Hydrogenated Amorphous Carbons in CF4 Plasmas and O2 Plasmas.

The sp2-rich hydrogenated amorphous carbon (a-C:H) is widely adopted as hard masks in semiconductor-device fabrication processes. The ion-enhanced etch characteristics of sp2-rich a-C:H films on ion density and ion energy were investigated in CF4 plasmas and O2 plasmas in this work. The etch rate of sp2-rich a-C:H films in O2 plasmas increased linearly with ion density when no bias power was applied, while the fluorocarbon deposition was observed in CF4 plasmas instead of etching without bias power. The etch rate was found to be dependent on the half-order curve of ion energy in both CF4 plasmas and O2 plasmas when bias power was applied. An ion-enhanced etching model was suggested to fit the etch rates of a-C:H in CF4 plasmas and O2 plasmas. Then, the etch yield and the threshold energy for etching were determined based on this model from experimental etch rates in CF4 plasma and O2 plasma. The etch yield of 3.45 was observed in CF4 plasmas, while 12.3 was obtained in O2 plasmas, owing to the high reactivity of O radicals with carbon atoms. The threshold energy of 12 eV for a-C:H etching was obtained in O2 plasmas, while the high threshold energy of 156 eV was observed in CF4 plasmas. This high threshold energy is attributed to the formation of a fluorocarbon layer that protects the a-C:H films from ion-enhanced etching.

High-Quality Transferred GaN-Based Light-Emitting Diodes through Oxygen-Assisted Plasma Patterning of Graphene.

Two-dimensional (2D) release layers are commonly used to realize flexible nitride films. Here, high-quality, large-area, and transferable nitride films can be precisely controlled grown on O2-plasma-assisted patterned graphene. The first-principles calculation indicates that the patterned graphene introduced by O2 plasma changes the original wettability of sapphire and the growth behavior of Al atoms is related with layer number of graphene, which is consistent with experimental results. The as-fabricated violet GaN-based light-emitting diodes (LEDs) show high stability and high light output power (LOP). This work provides a general rule for the growth of high-quality and transferable III-nitride films on graphene from the atomic scale and provide actual demonstration in LED. The advantages of the proposed new growth method can supply new ways for electronic and optoelectronic flexible devices of group III nitride semiconductors.

Gate-Modulated Ultrasensitive Visible and Near-Infrared Photodetection of Oxygen Plasma-Treated WSe2 Lateral pn-Homojunctions.

We investigate the development of gate-modulated tungsten diselenide (WSe2)-based lateral pn-homojunctions for visible and near-infrared photodetector applications via an effective oxygen (O2) plasma treatment. O2 plasma acts to induce the p-type WSe2 for the otherwise n-type WSe2 by forming a tungsten oxide (WOx) layer upon O2 plasma treatment. The WSe2 lateral pn-homojunctions displayed an enhanced photoresponse and resulted in open-circuit voltage (VOC) and short-circuit current (ISC) originating from the pn-junction formed after O2 plasma treatment. We further notice that the amplitude of the photocurrent can be modulated by different gate biases. The fabricated WSe2 pn-homojunctions exhibit greater photoresponse with photoresponsivities (ratio of the photocurrent and incident laser power) of 250 and 2000 mA/W, high external quantum efficiency values (%, total number of charge carriers generated for the number of incident photons on photodetectors) of 97 and 420%, and superior detectivity values (magnitude of detector sensitivity) of 7.7 × 109 and 7.2 × 1010 Jones upon illumination with visible (520 nm) and near-infrared lasers (852 nm), respectively, at low bias (Vg = 0 V and Vd = 1 V) at room temperature, demonstrating very high-performance in the IR region superior to the contending two-dimensional material-based photonic devices. These superior optoelectronic properties are attributed to the junctions induced by O2 plasma doping, which facilitate the effective carrier generation and separation of photocarriers with applied external drain bias upon strong light absorption.

Controlling the Facet of ZnO during Wet Chemical Etching Its (000 1 ¯ ) O-Terminated Surface.

Special surface plays a crucial role in nature as well as in industry. Here, the surface morphology evolution of ZnO during wet etching is studied by in situ liquid cell transmission electron microscopy and ex situ wet chemical etching. Many hillocks are observed on the (000 1 ¯ ) O-terminated surface of ZnO nano/micro belts during in situ etching. Nanoparticles on the apex of the hillocks are observed to be essential for the formation of the hillocks, providing direct experimental evidence of the micromasking mechanism. The surfaces of the hillocks are identified to be {01 1 ¯ 3 ¯ } crystal facets, which is different from the known fact that {01 1 ¯ 1 ¯ } crystal facets appear on the (000 1 ¯ ) O-terminated surface of ZnO after wet chemical etching. O2 plasma treatment is found to be the key factor for the appearance of {01 1 ¯ 3 ¯ } instead of {01 1 ¯ 1 ¯ } crystal facets after etching for both ZnO nano/micro belts and bulk materials. The synergistic effect of acidic etching and O-rich surface caused by O2 plasma treatment is proposed to be the cause of the appearance of {01 1 ¯ 3 ¯ } crystal facets. This method can be extended to control the surface morphology of other materials during wet chemical etching.

Plasma-Assisted Surface Modification on the Electrode Interface for Flexible Fiber-Shaped Zn-Polyaniline Batteries.

A novel flexible fiber-shaped zinc-polyaniline battery (FZPB) is proposed to enhance the electrochemical performance, mass loading, and stability of polyaniline cathodes. To this end, electron-cyclotron-resonance oxygen plasma-modified carbon fibers are employed. During plasma treatment, on the carbon-fiber surface, O2+ plasma breaks the C-C, C-H, and C-N bonds to form C radicals, while the O2 molecules are broken down to reactive oxygen species (O+, O2+, O2+, and O22+). The C radicals and the reactive oxygen species are combined to homogeneously form oxygen functional groups, such as -OH, -COOH, and -C═O. The surface area and total pore volume of the treated carbon fibers increase as the plasma attacks. During electrodeposition, aniline interacts with the oxygen functional groups to form N-O and N-H bonds and π-π stacking, resulting in a homogeneous and high-loading polyaniline structure and improved adhesion between polyaniline and carbon fibers. In an FZPB, the cathode with plasma-treated carbon fibers and a polyaniline loading of 0.158 mg mgCF-1 (i.e., 2.36 mg cmCF-1) exhibits a capacity retention of 95.39% after 200 cycles at 100 mA g-1 and a discharge capacity of 83.96 mA h g-1 at such a high current density of 2000 mA g-1, which are ∼1.67 and 1.24 times those of the pristine carbon-fiber-based one, respectively. Furthermore, the FZPB exhibits high flexibility with a capacity retention of 86.4% after bending to a radius of 2.5 mm for 100 cycles as a wearable energy device.

Direct Patterning of a Carbon Nanotube Thin Layer on a Stretchable Substrate.

Solution-based direct patterning on an elastomer substrate with meniscus-dragging deposition (MDD) enables fabrication of very thin carbon nanotube (CNT) layers in the nanometer scale (80-330 nm). To fabricate the CNT pattern with CNT solution, contact angle, electrical variation, mechanical stress, and surface cracks of elastomer substrate were analyzed to identify the optimal conditions of O2 treatment (treatment for 30 s with RF power of 50 W in O2 atmosphere of 50 sccm) and mixture ratio between Ecoflex and polydimethylsiloxane (PDMS) (Ecoflex:PDMS = 5:1). The type of mask for patterning of the CNT layer was determined through quantitative analysis for sharpness and uniformity of the fabricated CNT pattern. Through these optimization processes, the CNT pattern was produced on the elastomer substrate with selected mask (30 µm thick oriented polypropylene). The thickness of CNT pattern was also controlled to have hundreds nanometer and 500 µm wide rectangular and circular shapes were demonstrated. Furthermore, the change in the current and resistance of the CNT layer according to the applied strain on the elastomer substrate was analyzed. Our results demonstrated the potential of the MDD method for direct CNT patterning with high uniformity and the possibility to fabricate a stretchable sensor.

Improvement of PDMS surface biocompatibility is limited by the duration of oxygen plasma treatment.

The recent study focused on the improvement of polydimethylsiloxane (PDMS) surface biocompatibility as the most commonly used biomaterial in maxillofacial prostheses for intraoral defects. Biocompatibility enhances tissue-prosthesis integration to prevent implant dislocation; to evaluate the parameter the study conducted at different times of oxygen plasma exposure. Scanning electron microscopy, contact angle measurement, atomic force microscopy and above all, cell cultivation-as a crucial factor in biocompatibility-carried out to investigate the samples' characteristics. An improved PDMS biocompatibility is expected; referring to the fact that an "optimal range"-not necessarily the maximum values-of surface hydrophilicity and roughness could induce an enhanced cell attachment on the PDMS surface, an "optimum time" of O2 plasma exposure is required to meet this goal. Considering the O2 plasma setup items, the ratio of PDMS components and fabrication process in the current survey, 2.5-min O2 plasma exposure well suited to PDMS surface cell adhesion.

Functionalization of Polyethylene (PE) and Polypropylene (PP) Material Using Chitosan Nanoparticles with Incorporated Resveratrol as Potential Active Packaging.

The present paper reports a novel method to improve the properties of polyethylene (PE) and polypropylene (PP) polymer foils suitable for applications in food packaging. It relates to the adsorption of chitosan-colloidal systems onto untreated and oxygen plasma-treated foil surfaces. It is hypothesized that the first coated layer of chitosan macromolecular solution enables excellent antibacterial properties, while the second (uppermost) layer contains a network of polyphenol resveratrol, embedded into chitosan nanoparticles, which enables antioxidant and antimicrobial properties simultaneously. X-ray photon spectroscopy (XPS) and infrared spectroscopy (FTIR) showed successful binding of both coatings onto foils as confirmed by gravimetric method. In addition, both attached layers (chitosan macromolecular solution and dispersion of chitosan nanoparticles with incorporated resveratrol) onto foils reduced oxygen permeability and wetting contact angle of foils; the latter indicates good anti-fog foil properties. Reduction of both oxygen permeability and wetting contact angle is more pronounced when foils are previously activated by O2 plasma. Moreover, oxygen plasma treatment improves stability and adhesion of chitosan structured adsorbates onto PP and PE foils. Foils also exhibit over 90% reduction of Staphylococcus aureus and over 77% reduction of Escherichia coli as compared to untreated foils and increase antioxidant activity for over a factor of 10. The present method may be useful in different packaging applications such as food (meat, vegetables, dairy, and bakery products) and pharmaceutical packaging, where such properties of foils are desired.