An antifouling electrochemical biosensor based on oxidized bacterial cellulose and quaternized chitosan for reliable detection of involucrin in wound exudate.

The monitoring of biomarkers in wound exudate is of great importance for wound care and treatment, and electrochemical biosensors with high sensitivity are potentially useful for this purpose. However, conventional electrochemical biosensors always suffer from severe biofouling when performed in the complex wound exudate. Herein, an antifouling electrochemical biosensor for the detection of involucrin in wound exudate was developed based on a wound dressing, oxidized bacterial cellulose (OxBC) and quaternized chitosan (QCS) composite hydrogel. The OxBC/QCS hydrogel was prepared using an in-situ chemical oxidation and physical blending method, and the proportion of OxBC and QCS was optimized to achieve electrical neutrality and enhanced hydrophilicity, therefore endowing the hydrogel with exceptional antifouling and antimicrobial properties. The involucrin antibody SY5 was covalently bound to the OxBC/QCS hydrogel to construct the biosensor, and it demonstrated a low limit of detection down to 0.45 pg mL-1 and a linear detection range from 1.0 pg mL-1 to 1.0 µg mL-1, and it was capable of detecting targets in wound exudate. Crucially, the unique antifouling and antimicrobial capability of the OxBC/QCS hydrogel not only extends its effective lifespan but also guarantees the sensing performance of the biosensor. The successful application of this wound dressing, OxBC/QCS hydrogel for involucrin detection in wound exudate demonstrates its promising potential in wound healing monitoring.

Quaternized chitosan/oxidized bacterial cellulose cryogels with shape recovery for noncompressible hemorrhage and wound healing.

Management of noncompressible torso hemorrhage is an urgent clinical requirement, desiring biomaterials with rapid hemostasis, anti-infection and excellent resilient properties. In this research, we have prepared a highly resilient cryogel with both hemostatic and antibacterial effects by chemical crosslinking and electrostatic interaction. The network structure crosslinked by quaternized chitosan and genipin was interspersed with oxidized bacterial cellulose after lyophilization. The as-prepared cryogel can quickly return to the original volume when soaking in water or blood. The appropriately sized pores in the cryogel help to absorb blood cells and further activate coagulation, while the quaternary ammonium salt groups on quaternized chitosan inhibit bacterial infections. Both cell and animal experiments showed that the cryogel was hypotoxic and could promote the regeneration of wound tissue. This research provides a new pathway for the preparation of double crosslinking cryogels and offers effective and safe biomaterials for the emergent bleeding management of incompressible wounds.

Super-stretching and high-performance ionic thermoelectric hydrogels based on carboxylated bacterial cellulose coordination for self-powered sensors.

Self-powered sensors that do not require external power sources are crucial for next-generation wearable electronics. As environment-friendly ionic thermoelectric hydrogels can continuously convert the low-grade heat of human skin into electricity, they can be used in intelligent human-computer interaction applications. However, their low thermoelectric output power, cycling stability, and sensitivity limit their practical applications. This paper reports a 2,2,6,6-tetramethylpiperidine-1-oxyl radical (TEMPO)-oxidized carboxylated bacterial cellulose (TOBC) coordination double-network ionic thermoelectric hydrogel with lithium bis(trifluoromethane) sulfonimide (LiTFSI) as an ion provider for thermodiffusion, as LiTFSI exhibits excellent thermoelectric properties with a maximum power output of up to 538 nW at a temperature difference of 20 K. The interactions between the ions and the hydrogel matrix promote the selective transport of conducting ionic ions, producing a high Seebeck coefficient of 11.53 mV K-1. Hydrogen bonding within the polyacrylamide (PAAm) network and interactions within the borate ester bond within the TOBC confer excellent mechanical properties to the hydrogel such that the stress value at a tensile deformation of 3100 % is reaches 0.85 MPa. The combination of the high ionic thermovoltage and excellent mechanical properties ionic thermoelectric hydrogels provides an effective solution for the design and application of self-powered sensors based on hydrogels.

Growth of spiral ganglion neurons induced by graphene oxide/oxidized bacterial cellulose composite hydrogel.

The damage or degeneration of spiral ganglion neurons (SGNs) can impair the auditory signals transduction from hair cells to the central auditory system, and cause significant hearing loss. Herein, a new form of bioactive hydrogel incorporating topological graphene oxide (GO) and TEMPO-oxidized bacterial cellulose (GO/TOBC hydrogel) was developed to provide a favorable microenvironment for SGN neurite outgrowth. As the network structure of lamellar interspersed fiber cross-linked by GO/TOBC hydrogels well simulated the structure and morphology of ECM, with the controllable hydrophilic property and appropriate Young's modulus well met those requirements of SGNs microenvironment, the GO/TOBC hybrid matrix exhibited great potential to promote the growth of SGNs. The quantitative real-time PCR result confirmed that the GO/TOBC hydrogel can significantly accelerate the development of growth cones and filopodia, by increasing the mRNA expression levels of diap3, fscn2, and integrin ß1. These results suggest that GO/TOBC hydrogel scaffolds have the potential to be used to construct biomimetic nerve grafts for repairing or replacing nerve defects.

Effect of chitosan grafting oxidized bacterial cellulose on dispersion stability and modulability of biodegradable films.

Bacterial cellulose (BC) is a kind of high-purity cellulose biomaterial with a unique three-dimensional structure. To improve the mechanical properties and reinforce the BC composite films, in this study, we provide in detail a simple, fast, and environmentally-friendly method to prepare a biodegradable composite film using chitosan (CS) with different molecular weights and BC with excellent dispersion. The water moisture content (MC), water solubility (WS), contact angle (CA), mechanical properties and barrier properties were measured to assess the effect of CSn-OBC composite films. The morphology, structural and thermal properties of the films were evaluated by scanning electron microscopy, spectral analysis, thermogravimetry and X-ray diffraction. Results showed that the biodegradable film prepared by grafting chitosan with high molecular weight and uniformly dispersing bacterial cellulose exhibited superior mechanical properties, water resistance, and thermal stability, which are essential characteristics for commercial applications in complex environments.

Oxidized bacterial cellulose reinforced nanocomposite scaffolds for bone repair.

Bone tissue engineering has been widely used in promoting the repair and regeneration of bone defects. Tissue-engineered bone scaffolds can simulate the extracellular matrix environment and induce the proliferation and differentiation of osteoblasts. The first issues to be considered when constructing bone repair scaffolds include biocompatibility, stress resistance, degradability and stability. Here, a low-cost manufacturing introduces a new bone repair composite scaffold (CS/OBC/nHAP). The scaffolds were composed of only natural derived components, including nano hydroxyapatite (nHAP) formed by in-situ crystallization of Ca2+/PO42- solution and evenly dispersed in oxidized bacterial cellulose (OBC) and chitosan (CS) scaffolds. The experimental results showed that compared with CS/nHAP scaffold, CS/OBC/nHAP scaffold has significantly improve mechanical properties and water retention performance, and has a more stable degradation rate. Cell experiments showed that the CS/OBC/nHAP scaffold has good biocompatibility and significantly promote the proliferation of MC3T3-E1 cells. The rat skull defect model further proves that the CS/OBC/nHAP scaffold could induce the formation of bone tissue. Meanwhile, H&E staining experiment show that the CS/OBC/nHAP scaffold has good stability in vivo and could better promote the formation of bone tissue.

Multifunctional dopamine modification of green antibacterial hemostatic sponge.

A novel hemostatic nanocomposite (OBC-PDA/PDA-MMT/Ag NPs) was prepared. As Functional hemostatic particles, hydrochloric acid modified montmorillonite coated with dopamine (PDA-MMT) doped into oxidized bacterial cellulose (OBC). In the presence of carboxyl and dopamine, silver ions (Ag+) were reduced into Ag nanoparticles (Ag NPs) distributed homogeneously on the matrix of PDA-MMT and OBC. Then, dopamine was grafted onto the oxidized bacterial cellulose under the crosslinking effect of 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC). After dopamine was grafted onto the oxidized bacterial cellulose, the interaction between PDA-MMT and the whole material was enhanced, and the flexibility was also improved. OBC-PDA/PDA-MMT/Ag NPs hemostatic sponge have appropriate mechanical strength, broad-spectrum antibacterial properties and excellent biodegradability. The hemostatic sponge with addition of PDA-MMT and Ag NPs is expected to provide functional properties such as rapid hemostasis, bacteriostasis and wound healing. In addition, the hemostatic effect of the compound was confirmed in vivo. The hemostatic sponge showed greater coagulation capacity, higher adherent red blood cells and platelets, and lower blood loss. The results show that hemostatic sponge is a rapid and effective coagulant with good antibacterial properties.

Antibacterial Multi-Layered Nanocellulose-Based Patches Loaded with Dexpanthenol for Wound Healing Applications.

Antibacterial multi-layered patches composed of an oxidized bacterial cellulose (OBC) membrane loaded with dexpanthenol (DEX) and coated with several chitosan (CH) and alginate (ALG) layers were fabricated by spin-assisted layer-by-layer (LbL) assembly. Four patches with a distinct number of layers (5, 11, 17, and 21) were prepared. These nanostructured multi-layered patches reveal a thermal stability up to 200 °C, high mechanical performance (Young's modulus ≥ 4 GPa), and good moisture-uptake capacity (240-250%). Moreover, they inhibited the growth of the skin pathogen Staphylococcus aureus (3.2-log CFU mL-1 reduction) and were non-cytotoxic to human keratinocytes (HaCaT cells). The in vitro release profile of DEX was prolonged with the increasing number of layers, and the time-dependent data imply a diffusion/swelling-controlled drug release mechanism. In addition, the in vitro wound healing assay demonstrated a good cell migration capacity, headed to a complete gap closure after 24 h. These results certify the potential of these multi-layered polysaccharides-based patches toward their application in wound healing.

Fabrication of oxidized bacterial cellulose by nitrogen dioxide in chloroform/cyclohexane as a highly loaded drug carrier for sustained release of cisplatin.

Carboxylated bacterial cellulose (OBC) was fabricated by oxidation with nitrogen dioxide in chloroform/cyclohexane and employed as a carrier for sustained release of antitumor substance cisplatin (CDDP). The influence of removing water method, solvent used in the synthesis, concentration of N2O4, and duration of the oxidation on content of carboxyl groups in reaction products was established. Due to the possibility of nitrogen dioxide to penetrate into cellulose crystallites, the carboxyl group content of the OBC reaches high values up to 4 mmol/g. In vitro degradation of OBC was determined under simulated physiological conditions. The immobilization of CDDP on OBC was studied in detail. The initial burst release of the drug from the polymer was depressed. The cytotoxicity of CDDP-loaded OBC was evaluated with HeLa cells. The unique structure and properties of OBC make it a great candidate as drug delivery carrier.

In vitro degradability and bioactivity of oxidized bacterial cellulose-hydroxyapatite composites.

Hydroxyapatite-associated bacterial cellulose (BC/HA) is a promising composite for biomedical applications. However, this hybrid composite has some limitations due to its low in vivo degradability. The objective of this work was to oxidize BC and BC/HA composites for different time periods to produce 2,3 dialdehyde cellulose (DAC). The BC and oxidized BC (OxBC) membranes were mineralized to obtain the hybrid materials (BC/HA and OxBC/HA) and their physico-chemical, degradability, and bioactivity properties were studied. The results showed that OxBC/HA was more bioactive and degradable than BC/HA, which isa function of the degree of BC oxidation. High glucose levels in the BC degradation were observed as a function of oxidation degree, and other products, such as butyric acid and acetic acid resulted from DAC degradation. Therefore, this chemical modification reaction favors BC degradation, making it a good biodegradable and bioactive material with a potential for bone regeneration applications.

A novel microporous oxidized bacterial cellulose/arginine composite and its effect on behavior of fibroblast/endothelial cell.

The bacterial cellulose (BC) has been reported widely. Although there are many methods to modify BC, such as the oxidized BC, which is biodegradable and can be used as wound dressing. However, the nanostructure of BC makes it difficult to be oxidized. Importantly, high oxidation degree makes the content of aldehyde high, which make the cell biocompatibility poor. Herein, we fabricated a novel bio-composite based on microporous oxidized BC (MOBC) and in-situ grafted with Arg. The micropores can increase the contact area between BC and oxidizing agent and the reaction between MOBC and Arg, which will enhance the biocompatibility. The roughness and surface energy of MOBC/68.68%Arg are 1.5 and 1.16 times than that of BC respectively. We applied a microfluidic chip to evaluate the cell migration. Comparing with BC, MOBC/Arg promoted proliferation, migration and expression of Collagen-I of fibroblasts and endothelial cells. It prospects the MOBC/Arg can be used as wound dressing.