Promoting effects of ferric ions on Microcystis aeruginosa growth and arsenate accumulation and reduction at different phosphorus environments.

The effects of different dissolved organic phosphorus (DOP) associated with distinct iron conditions (iron deficient (dFe), ferric ions (Fe3+), and colloidal iron (CFe)) on algal growth and arsenate (As(V)) metabolism were systematically evaluated and compared in Microcystis aeruginosa. Two chemical forms of DOP (D-glucose-6-phosphate (GP) and phytic acid (PA)), as well as dissolved inorganic phosphorus (DIP), were employed as distinct phosphorus environments. The results revealed that As(V) metabolism of M. aeruginosa was more influenced by different phosphorus forms than by different iron conditions. Conversely, the release of microcystins in the media was found to be significantly more affected by the different phosphorus forms than by the iron conditions. Moreover, DOP was observed to promote arsenic (As) biotransformation, particularly the efflux of methylated As from a single algal cell, whereas DIP was found to primarily facilitate As(V) accumulation in algae. The total As metabolism amount per algal cell under PA was observed to be five times that observed under DIP and GP. The influence of iron conditions on the synthesis of algal metabolites was notable, as evidenced by the metabolites identified in algae of aliphatic (δ 1.28-1.68), humic acid-like and aromatic protein-like substances through 1H-NMR spectra and three-dimensional excitation-emission matrix fluorescence spectroscopy analysis. This impact was particularly notable at Fe3+ conditions, due to the role of Fe3+ as a micronutrient with highly bioavailable forms, which enhanced the synthesis of organic compounds in algae and promoted algal growth. Consequently, Fe3+ could inhibit As accumulation under DIP but promote it under DOP. The obtained results facilitate a more comprehensive understanding of the combined role of different phosphorus forms and iron conditions in algal bloom outbreaks and As(V) metabolism.

Sorghum starch review: Structural properties, interactions with proteins and polyphenols, and modification of physicochemical properties.

Sorghum, a gluten-free carbohydrate source with high antioxidants and resistant starch, contains anti-nutrients like phytic acid, tannin, and kafirin. Interactions with starch and proteins result in polyphenol-starch, starch-kafirin, and tannin-protein complexes. These interactions yield responses such as V-type amylose inclusion complexes, increased hydrophobic residues, and enzyme resistance, reducing nutrient availability and elevating resistant starch levels. Factors influencing these interactions include starch composition, structure, and Chain Length Distribution (CLD). Starch structure is impacted by enzymes like ADP-glucose pyrophosphorylase, starch synthases, and debranching enzymes, leading to varied chain lengths and distributions. CLD differences significantly affect crystallinity and physicochemical properties of sorghum starch. Despite its potential, the minimal utilization of sorghum starch in food is attributed to anti-nutrient interactions. Various modification approaches, either direct or indirect, offer diverse physicochemical changes with distinct advantages and disadvantages, presenting opportunities to enhance sorghum starch applications in the food industry.

Aminated lignin and phytic acid-assisted polyacrylic acid hydrogel sensors with enhanced mechanical properties and strong adhesion.

Excellent comprehensive performance of hydrogels can be achieved by synergistically combining multiple interaction mechanisms. In this study, a series of hydrogels with rapid gelation and excellent adhesive, mechanical, self-healing, and conductive properties, driven by covalent bonds and multiple reversible interactions, were constructed by mixing acrylic acid (AA), aminated alkaline lignin (AAL), phytic acid (PA), and Fe3+. The rigid skeletons of polyacrylic acid (PAA) and AAL, as well as the metal coordination bonds formed between them and Fe3+, enhance the mechanical properties of the samples. The samples exhibit excellent tensile strength and compressive strength, reaching 73.7 kPa and 4.6 MPa (under a compressive strain of 80 %), respectively, with a tensile strain of 1142 % under the same condition. Adding PA enhances the compliance and adhesion (148.2 kPa for porcine skin) of the gel and endowed it with good flame retardancy. Additionally, the sample maintained its good mechanical properties and conductivity even after five cutting-healing cycles. Good durability, robust adhesion, and high electrical conductivity of the sample render it a promising strain sensor for electronic devices. This work provides a design strategy for preparing hydrogels with superior adhesion and good comprehensive performance.

Phytic acid-induced durable fire-proof and hydrophobic complex coating for versatile cotton fabrics.

To address the current development requirements for multifunctional cotton fabrics, a phytic acid-induced flame-retardant hydrophobic coating containing nitrogen (N), phosphorus (P), and silicon (Si) was grafted on the surface of cotton fabrics using a facile step-by-step immersion method. The limiting oxygen index value improved to 31.2 %, decreasing to 26.7 % after 50 laundering cycles, while the fabric remained self-extinguishing effect in the vertical flammability test and showed a water contact angle of 126.1°. Cone calorimetry test showed that the modified fabric could not be ignited at the irradiation heat flux of 35 kW/m2. When the irradiation heat flux was raised to 50 kW/m2, there was a significant decline in the peak heat release rate of the modified cotton fabric, which decreased by 43.2 % to a remarkably low value of 114.0 kW/m2, indicating excellent flame-retardant properties. The analysis of the flame-retardant mechanism uncovered that the modified coating exhibited a significant dual flame-retardant mechanism involving both the gaseous phase and the condensed phase. Additionally, the oil-water separation tests revealed that the separation efficiency of the modified cotton fabrics was as high as 97.1 % and remained around 96 % after 10 cycles, which made them reusable for the clean-up of hazardous chemicals.

Synthesis, Characterization, and Biological Evaluation of Chitosan Nanoparticles Cross-Linked with Phytic Acid and Loaded with Colistin against Extensively Drug-Resistant Bacteria.

The natural evolution of microorganisms, as well as the inappropriate use of medicines, have accelerated the problem of drug resistance to many of the antibiotics employed today. Colistin, a lipopeptide antibiotic used as a last resort against multi-resistant strains, has also begun to present these challenges. Therefore, this study was focused on establishing whether colistin associated with chitosan nanoparticles could improve its antibiotic activity on an extremely resistant clinical isolate of Pseudomonas aeruginosa, which is a clinically relevant Gram-negative bacterium. For this aim, nanoparticulate systems based on phytic acid cross-linked chitosan and loaded with colistin were prepared by the ionic gelation method. The characterization included particle size, polydispersity index-PDI, and zeta potential measurements, as well as thermal (DSC) and spectrophotometric (FTIR) analysis. Encapsulation efficiency was assessed by the bicinchoninic acid (BCA) method, while the antimicrobial evaluation was made following the CLSI guidelines. The results showed that colistin-loaded nanoparticles were monodispersed (PDI = 0.196) with a particle size of around 266 nm and a positive zeta potential (+33.5 mV), and were able to associate with around 65.8% of colistin and decrease the minimum inhibitory concentration from 16 µg/mL to 4 µg/mL. These results suggest that the association of antibiotics with nanostructured systems could be an interesting alternative to recover the antimicrobial activity on resistant strains.

Phytic acid-loaded polyvinyl alcohol hydrogel promotes wound healing of injured corneal epithelium through inhibiting ferroptosis.

As the important barrier of intraocular tissue, cornea is easy to suffer various kinds of injuries. Among them, acute alkali burn is a thorny ophthalmic emergency event, which can lead to corneal persistent epithelial defects, ulcers, and even perforation. Ferroptosis, a mode of regulatory cell death, has been found to play a key role in the process of corneal alkali burn, of which lipid peroxidation and intracellular iron levels are considered to be the possible therapeutic targets. To seek new effective treatments, the study herein focused on the occurrence of oxidative stress and ferroptosis in corneal alkali burn, exploring the role of phytic acid (PA), a natural small molecule with both antioxidant and iron chelating capacity, in the repair of corneal epithelial injury. The in vivo therapeutic results showed that PA eyedrops treatment promoted the recovery of corneal morphology and function, and in vitro experiments proved that PA prompted the repair of oxidative stress induced-corneal epithelial injury through ferroptosis inhibition. In addition, better drug treatment effect could be achieved through hydrogel delivery and sustained release, and our in vivo experiments showed the superior therapeutic effects of PA delivered by PVA hydrogels with larger molecular weights on corneal injury. In summary, this study demonstrated the excellent effect of natural small molecule PA with antioxidant and high efficiency chelating ferrous ions on ferroptosis inhibition, and showed the outstanding application prospect of PVA/PA hydrogels in the treatment of corneal epithelial injury.

Biotechnological approaches to reduce the phytic acid content in millets to improve nutritional quality.

MAIN CONCLUSION: The review article summarizes the approaches and potential targets to address the challenges of anti-nutrient like phytic acid in millet grains for nutritional improvement. Millets are a diverse group of minor cereal grains that are agriculturally important, nutritionally rich, and the oldest cereals in the human diet. The grains are important for protein, vitamins, macro and micronutrients, fibre, and energy sources. Despite a high amount of nutrients, millet grains also contain anti-nutrients that limit the proper utilization of nutrients and finally affect their dietary quality. Our study aims to outline the genomic information to identify the target areas of research for the exploration of candidate genes for nutritional importance and show the possibilities to address the presence of anti-nutrient (phytic acid) in millets. So, the physicochemical accessibility of micronutrients increases and the agronomic traits can do better. Several strategies have been adopted to minimize the phytic acid, a predominant anti-nutrient in cereal grains. In the present review, we highlight the potential of biotechnological tools and genome editing approaches to address phytic acid in millets. It also highlights the biosynthetic pathway of phytic acid and potential targets for knockout or silencing to achieve low phytic acid content in millets.

A novel hydrogel composite of chitosan-phytic acid complex with PAAm: Characterization and adsorptive properties for UO22+and methylene blue.

The composite of a polyelectrolyte combination of chitosan and phytic acid (CsPa) and its entrapped form in polyacrylamide (PAAmCsPa) were synthesized. The composites were characterized by a number of methods including ATR-FTIR, SEM-EDX, XRD and XPS. The adsorptive properties of CsPa and PAAmCsPa were analyzed and modelled for UO22+ and methylene blue (MB+). The results showed that the composites exhibited physico-chemical properties that were both inherited from the components as well as unique to them. The isotherms of UO22+ and MB+ were L-type Giles isotherms. The adsorption kinetics followed the pseudo-second-order model, in contrast to the Langmuir model, which predicts first-order kinetics for both species. According to the Weber-Morris model, the nature of the adsorption process was ion exchange and/or complex formation for both composites and ions. The thermodynamics showed that the adsorption process was endothermic (ΔH > 0), with increasing entropy (ΔS > 0) and spontaneous (ΔG < 0). The reusability tests of the composites for UO22+ adsorption showed that the composites were substantially reusable for 6 cycles. The composites were selective for UO22+ over MB+ ions, and UO22+ adsorption increased significantly when MB+ adsorbed composites were used. Reproducible measurements demonstrating the storability of the composites were obtained over a period of approximately one year.

Effects of phytic acid from soybean meal on Maillard reaction and antioxidant properties of products.

This study used glycine (Gly), glucose (Glu), and soybean meal phytic acid (PA) as raw materials to investigate the effect of different PA addition amounts on the Gly-Glu Maillard reaction system and the antioxidant capacity of the products through rheological properties, particle size, chromatography, and other methods. The results showed that with the addition of PA, the apparent viscosity and average particle size of the system decreased, the thermal denaturation temperature increased, the product concentration decreased, the color became brighter, and the antioxidant performance was enhanced. This indicates that PA reacts with Gly and Glu to form PA - Gly and PA - Glu complexes, respectively, and hinders the Maillard reaction. This work demonstrates the potential application value of soybean meal PA in controlling the Maillard reaction.

Biomimetic synthetic test system based on hydroxyapatite cement for adhesive strength evaluation of experimental mineral-organic bone adhesive materials.

The development of bone adhesive materials is a research field of high relevance for the advancement of clinical procedures. Despite this, there are currently no material candidates meeting the full range of requirements placed on such a material, such as biocompatibility, sufficient mechanical properties and bond strength under biological conditions, practical applicability in a clinical setting, and no adverse effect on the healing process itself. A serious obstacle to the advancement of the field is a lack in standardized methodology leading to comparable results between experiments and different research groups. Natural bone samples are the current gold-standard material used to perform adhesive strength experiments, however they come with a number of drawbacks, including high sample variability due to unavoidable natural causes and the impossibility to reliably recreate test conditions to repeat experiments. This paper introduces a valuable auxiliary test method capable of producing large numbers of synthetic test specimens which are chemically similar to bone and can be produced in different laboratories so to repeat experiments under constant conditions across laboratories. The substrate is based on a hydroxyapatite forming cement with addition of gelatine as organic component. Crosslinking of the organic component is performed to improve mechanical properties. In order to demonstrate the performance of the developed method, various experimental and commercial bone/tissue adhesive materials were tested and compared with results obtained by established methods to highlight the potential of the test system.

Spray drying of a zinc complexing agent for inhalation therapy of pulmonary fibrosis.

Pulmonary fibrosis, a disabling lung disease, results from the fibrotic transformation of lung tissue. This fibrotic transformation leads to a deterioration of lung capacity, resulting in significant respiratory distress and a reduction in overall quality of life. Currently, the frontline treatment of pulmonary fibrosis remains limited, focusing primarily on symptom relief and slowing disease progression. Bacterial infections with Pseudomonas aeruginosa are contributing to a severe progression of idiopathic pulmonary fibrosis. Phytic acid, a natural chelator of zinc, which is essential for the activation of metalloproteinase enzymes involved in pulmonary fibrosis, shows potential inhibition of LasB, a virulence factor in P. aeruginosa, and mammalian metalloproteases (MMPs). In addition, phytic acid has anti-inflammatory properties believed to result from its ability to capture free radicals, inhibit certain inflammatory enzymes and proteins, and reduce the production of inflammatory cytokines, key signaling molecules that promote inflammation. To achieve higher local concentrations in the deep lung, phytic acid was spray dried into an inhalable powder. Challenges due to its hygroscopic and low melting (25 °C) nature were mitigated by converting it to sodium phytate to improve crystallinity and powder characteristics. The addition of leucine improved aerodynamic properties and reduced agglomeration, while mannitol served as carrier matrix. Size variation was achieved by modifying process parameters and were evaluated by tools such as the Next Generation Impactor (NGI), light diffraction methods, and scanning electron microscopy (SEM). An inhibition assay for human MMP-1 (collagenase-1) and MMP-2 (gelatinase A) allowed estimation of the biological effect on tissue remodeling enzymes. The activity was also assessed with respect to inhibition of bacterial LasB. The formulated phytic acid demonstrated an IC50 of 109.7 µg/mL for LasB with viabilities > 80 % up to 188 µg/mL on A549 cells. Therefore, inhalation therapy with phytic acid-based powder shows promise as a treatment for early-stage Pseudomonas-induced pulmonary fibrosis.

Improvement of pasting behavior and retrogradation inhibition of normal corn starch treated with phytic acid and malic acid.

Phytic acid (PA) and malic acid (MA), as environmentally friendly, plant-based water-soluble acids, were applied to normal corn starch during dry heating at mildly acidic pH to improve its gelatinization and retrogradation behaviors. A significant increase in peak viscosity (5011-6338 mPa·s) was observed in starch treated with MA compared to native corn starch (1162 mPa·s). The treatment with PA and MA further increased the peak viscosity (8140-8621 mPa·s). The interactions of PA and MA with starch were analyzed using ICP-OES, FTIR, and 13C CP/MAS NMR. Swelling power and solubility increased in MA and PA + MA starches. After storage at 4 °C for 14 d, MA and PA + MA starches produced transparent and fluid gels without forming B-type crystals, which indicated inhibition of starch retrogradation by PA and MA treatments. In conclusion, dry heating with PA and MA produced starch with remarkably superior paste viscosity, swelling, and inhibition of retrogradation.

Study on gastric digestion behavior of phytase-treated soybean protein: A semi-dynamic digestion method.

The digestive characteristics of plant proteins are crucial for their nutritional value and utilization efficiency. In this study, an in vitro semi-dynamic digestion model was employed to investigate the gastric digestion process of soybean protein after treatment with phytase. The results found that phytase treatment reduced the phytate content in soybean proteins (22.83 ± 0.09 to 8.72 ± 0.07 mg/g), shifted its isoelectric point towards the alkaline range by 1 pH unit, and significantly improved its solubility at pH 4.0. Particularly for protein sample treated with phytase after acid precipitation, the formation of aggregates during digestion was weakened, resulting in a significantly higher digestion rate compared to untreated SPI, with digestion being at least 15 min faster than SPI. This study provides a strategy for preparing soybean protein with faster digestion and weaker clot-forming ability during digestion, which offers insights for the application of soybean protein in clinical nutrition products and specialized medical foods.

Inhibitory effects of phytic acid on the in vitro and in vivo growth of Trichothecium roseum in apple fruit and the underlying mechanisms involved in its action.

This study evaluated the inhibitory impacts of phytic acid on the growth of T. roseum both in vitro and in apple fruit, as well as elucidated the potential mechanisms underlying its action. Results showed that phytic acid suppressed the lesion diameter caused by T. roseum inoculation in apples, as well as spore germination and mycelial growth of T. roseum in vitro. Phytic acid reduced intracellular conductivity and soluble sugar content, while increasing malondialdehyde and soluble protein contents. Phytic acid treatment inhibited the activities of pectin lyase, pectin methyl polygalacturonase, ß-glucosidase, cellulase, xylanase, pectin methyl trans-eliminase, polygalacturonase, and polygalacturonase both in vitro and in apples. In contrast, inoculation of control and phytic acid-treated fruit with T. roseum resulted in increased enzyme activity. These findings suggest that phytic acid decrease the occurrence of heart rot in apples through inducing disruption of the cell membrane of T. roseum and mediating cell wall metabolism.

Encapsulation of Bamboosa vulgaris culms derived activated biochar into hierarchical permeable, phosphate rich and functionalized alginate aerogel composites and its contribution in U(VI) adsorption.

In this study, a facile methodology was designed to encapsulate Bamboosa vulgaris culms derived activated biochar (BVC) in a variable mass ratio, into a three-dimensional hierarchical porous and permeable and amino-thiocarbamated alginate (TSC) to prepare hybrid biosorbents (BVC-MSA). These ultralight and lyophilized phosphate rich macroporous sorbents were rationally characterized through FTIR, XRD, BET, SEM-EDS, elemental mapping, XPS techniques and employed for efficient UO22+ adsorption from aqueous solutions. The phytic acid (PA) was found to be a suitable hydrophilic and phosphorylating agent for the TSC matrix through hydrogen-bonded crosslinking when employed in a correct mass ratio (1:3). The SEM-EDS and XPS analyses confirmed the UO22+ sorption onto BVC-MSA-3 (the most suitable composite with a BVC/TSC mass ratio of 30.0 % w/w) and provided evidence of heteroatom involvement in developing the physico-chemical interactions. The BCV-MSA-3 exhibited the best response as a sorbent during kinetics/sorption process, therefore, it was selected to study the equilibrium sorption studies. The BCV-MSA-3 removal efficiency increased from 12.1 to 94.2 % using 0.2 to 1.8 g/L sorbent dose at pH (4.5). The mentioned sorbent displayed a significant maximum sorption capacity qm (309.55 mg/g at 35 °C) calculated through the best-fitted Langmuir and Temkin models (R2 ≈ 0.99). The sorption kinetics followed the pseudo-second-order (PSORE) model and exhibited fast sorption rate teq (180 min). Thermodynamic parameters clarified that the sorption process is feasible ΔGo (-25.3 to -27.6 kJ/mol kJ/mol), endothermic ΔHo (27.17 kJ/mol), and proceeds with a positive entropy (0.176 kJ/mol.K). The study shows that BCV-MSA-3 could be an alternative and auspicious sorbent for uranium removal from aqueous solution.

Self-healing injectable hydrogels incorporating hyaluronic acid and phytic acid: Rheological insights and implications for regenerative medicine.

Eying the increasing impact of hyaluronic acid (HA) and its multifaceted applications, this study employs a non-toxic, one-pot strategy to develop injectable, self-healing hydrogels for biomedical applications. Phytic acid (PA), a plant-derived organic acid with high biocompatibility and numerous hydroxyl groups, can act as a cross-linking agent to form hydrogen-bonded networks with the HA chains. The study examined the optimal mass ratio of HA to PA to achieve superior hydrogel performance. Fourier transform infrared spectroscopy, rheological studies, and thermal analysis confirmed the successful formation of the hydrogels, which exhibited injectability, rapid self-healing, malleability, and elasticity. The investigation of different compositions revealed a sensitive influence of PA on the self-assembly phenomena of HA during flow. SEM cross-section images of the freeze-dried gels revealed a porous surface in the form of an interconnected network of microchannels. In addition, the hydrogel exhibits good tissue adhesion properties and promotes cell proliferation in biocompatibility tests on human gingival fibroblasts. The significance of this study lies in the ability of the proposed materials to be injected, to conform to the complex 3D structure of host tissues as well as their ability to recover after damage, indicating significant potential as scaffolds for wound healing.

Green Phytic Acid-Assisted Synthesis of LiMn1-xFexPO4/C Cathodes for High-Performance Lithium-Ion Batteries.

As a promising cathode material, olivine-structured LiMnPO4 holds enormous potential for lithium-ion batteries. Herein, we demonstrate a green biomass-derived phytic-acid-assisted method to synthesize a series of LiMn1-xFexPO4/C composites. The effect of Fe doping on the crystal structure and morphology of LiMnPO4 particles is investigated. It is revealed that the optimal Fe doping amount of x = 0.2 enables a substantial enhancement of interfacial charge transfer ability and Li+ ion diffusion kinetics. Consequently, a large reversible capacity output of 146 mAh g-1 at 0.05 C and a high rate capacity of 77 mAh g-1 at 2 C were acquired by the as-optimized LiMn0.8Fe0.2PO4/C cathode. Moreover, the LiMn0.8Fe0.2PO4/C delivered a specific capacity of 68 mAh g-1 at 2 C after 500 cycles, with a capacity retention of 88.4%. This work will unveil a green synthesis route for advancing phosphate cathode materials toward practical implementation.

Phytic acid inhibits Cr(VI) reduction on Fe(II)-bearing clay minerals: Changing reduction sites and electron transfer pathways.

The presence of organic phosphorus may influence the characteristics of Cr(VI) reduction and immobilization on Fe(II)-bearing clay minerals under anoxic conditions, as the organic phosphorus tends to bind strongly to clay minerals in soil. Herein, reduced nontronite (rNAu-2) was used to reduction of Cr(VI) in the presence of phytic acid (IHP) at neutral pH. With IHP concentration from 0 to 500 µM, Cr(VI) reduction decreased obviously (17.8%) within first 5 min, and then preferred to stagnate during 4-12 h (≥50 µM). After that, Cr(VI) was reduced continuously at a slightly faster rate. Density functional theory (DFT) calculations revealed that IHP primarily absorbed at the edge sites of rNAu-2 to form Fe-IHP complexes. X-ray diffraction (XRD), scanning transmission electron microscopy (STEM), and Fourier transform infrared spectroscopy (FTIR) results demonstrated that IHP hindered the ingress of CrO42- into the interlayer space of rNAu-2 and impeded their reduction by trioctahedral Fe(II) and Al-Fe(II) at basal plane sites in the initial stage. Additionally, Fe(II) extraction results showed that IHP promoted the electron from interior transfer to near-edge, but hindered it further transfer to surface, resulting in the inhibition on Cr(VI) reduction at edge sites during the later stage. Consequently, IHP inhibits the reduction and immobilization of Cr(VI) by rNAu-2. Our study offers novel insights into electron transfer pathways during the Cr(VI) reduction by rNAu-2 with coexisting IHP, thereby improve the understanding of the geochemical processes of chromium within the iron cycle in soil.

Occurrence and distribution of phytic acid and its degradation products in soybeans in China: Analytical challenges.

Phytic acid (IP6) and its degradation products lower myo-inositol phosphates exert different impacts on nutrient bioavailability and product quality characteristics. However, information regarding the occurrence of IP6 and its degradation products is scarce. In this work, simultaneous determination of IP6 and its degradation products in soybeans was developed, with emphasis on analysis by UPLC-MS/MS and a BEH Amide column both with hybrid surface technology. The retention and analyte/metal surface interactions issues were effectively addressed without ion-pairing reagents addition or derivatization. This method was applied to analyze soybeans from China. Total contents were 0.44-13.2 mg/g, and IP6 and its degradation product myo-inositol pentakisphosphate (IP5) were the predominant analytes, accounting for over 99%. Accession type significantly affected IP5 content, and landraces had significantly higher IP5 than cultivars. Geographically, the lowest IP6 was concentrated in the Huanghuaihai region. Significant correlations existed between IP6 and longitude, altitude, and annual cumulative sunshine hours. This study provides comprehensive insights into the IP6 and its degradation product profile in soybeans, which will benefit breeding soybeans based on specific requirements.

Nanoconfinement-Enhanced Fire Safety and Mechanical Properties of Polylactic Acid with Nanocerium Metal-Organic Frameworks.

Ce-based metal-organic frameworks (Ce-MOFs) were successfully synthesized by coordinating binary acid and amino structures with cerium oxides. The quantum dot scale endows Ce-MOFs with enhanced modifiability. Additionally, the phosphorus-rich biomass phytic acid, with its numerous hydroxyl groups, strengthens the H-bond network within the system. Ce-MOFs-centered nanoconfinement can form through the multiple H-bond interactions between Ce-MOFs and polylactic acid (PLA) molecules, thereby improving the mechanical and flame-retardant properties of PLA. The PLA/CeCxOy-P-3 composite exhibited excellent fire retardancy and toxic gas suppression, with a 27.8% decrease in the peak heat release rate and a 50% reduction in the peak smoke production rate. Notably, PLA/CeCxOy-P-3 showed an 80% lower peak CO release compared with the pure PLA sample. Moreover, the incorporation of Ce-MOFs positively influenced the tensile properties of PLA, transforming it from brittle to tough. This work designed and synthesized Ce-MOFs on the quantum scale. The resulting Ce-MOFs with the anticipated structure offer a novel direction for preparing MOFs for flame retardant applications.