Hypericin-loaded in modified theranostic liposome nanoplatform: a preliminary in vivo study of targeting and diagnosis.

Modified theranostic liposomes were created by combining phospholipid 1,2-dipalmitoyl-sn-3-glycerol-phosphatidylcholine with two previously modified Pluronic® copolymers covalently linked with spermine and folic acid to carry and stabilize the photosensitizer compound hypericin. After physicochemical characterization, the photocytotoxicity was evaluated against different cancer and healthy cells presenting a strong photodynamic effect. The formulation exhibited no photoactivity without illumination and without hypericin. In vivo, pharmacokinetics biodistribution examined the uptake and theranostic potential of this nanoformulation after its intravenous administration in animal models. Fluorescence images revealed the maximum fluorescence between 0.5-4 h post-tail vein injection, making it an appropriate period for photodynamic treatment. The fluorescence of the entire body was monitored for at least 3 days, indicating that the theranostic procedures can be performed within the 0.5-4 h range after administration, after which the intensity decreases, indicating a potent metabolic ability with no significant side effects. The fluorescence images of the main organs consistently showed a signal during the 1st day of its application. After 48 h, only residues of the modified theranostic formulation were detected in the lungs and thyroid. The promising pharmacokinetics observed in our preliminary studies highlight the potential of this system, making it a worthy candidate for further investigation with tumor models.

Design of Liquid Formulation Based on F127-Loaded Natural Dimeric Flavonoids as a New Perspective Treatment for Leishmaniasis.

Infectious and Parasitic Diseases (IPD) remain a challenge for medicine due to several interconnected reasons, such as antimicrobial resistance (AMR). American tegumentary leishmaniasis (ATL) is an overlooked IPD causing persistent skin ulcers that are challenging to heal, resulting in disfiguring scars. Moreover, it has the potential to extend from the skin to the mucous membranes of the nose, mouth, and throat in both humans and various animals. Given the limited effectiveness and AMR of current drugs, the exploration of new substances has emerged as a promising alternative for ATL treatment. Arrabidaea brachypoda (DC). Bureau is a native Brazilian plant rich in dimeric flavonoids, including Brachydin (BRA), which displays antimicrobial activity, but still little has been explored regarding the development of therapeutic formulations. In this work, we present the design of a low-cost liquid formulation based on the use of Pluronic F127 for encapsulation of high BRA concentration (LF-B500). The characterization techniques revealed that BRA-loaded F127 micelles are well-stabilized in an unusual worm-like form. The in vitro cytotoxicity assay demonstrated that LF-B500 was non-toxic to macrophages but efficient in the inactivation of forms of Leishmania amazonensis promastigotes with IC50 of 16.06 µg/mL. The results demonstrated that LF-B500 opened a new perspective on the use of liquid formulation-based natural products for ATL treatment.

Evaluation of a polymeric topical formulation of Endoxifen in an estrogen receptor positive breast cancer murine model.

Breast cancer (BC) has surpassed lung cancer as the most diagnosed cancer and, in terms of mortality, is the fifth leading cause with 684,996 new deaths (6.7% of all cancer-related deaths) and the highest mortality amongst all cancers (15.5%) in women. Selective estrogen-receptor modulators (SERMs) have been used for the last thirty years for estrogen receptor-positive (ER+) BC prevention and treatment. Tamoxifen (TAM), the most widely used SERM, is orally administered and its long-term oral administration has been associated to toxicity and adverse side effects. Endoxifen (EDX) is one of the known active metabolites of TAM, with an affinity to ERα 100 times higher than TAM. Furthermore, EDX has shown antiproliferative activity against the ER+ BC cell line MCF-7. Alternative administration routes that avoid the metabolic processing of TAM seem an appealing alternative to its oral administration. With this aim, we have prepared a polymeric gel-like solution of Pluronic® F127 as vehicle for topical administration of EDX. In order to shed light on the potential clinical use of this formulation, we have compared it with the standard pharmaceutical form, i.e. orally administered TAM. The biodistribution, antitumor efficacy and toxic effects of topical EDX and oral TAM were evaluated in ER+ tumor xenograft athymic nu/nu mouse models. The results showed a statistically significant antitumor effect and reduced toxicity of topical EDX as compared to oral TAM or empty F127 gel. This novel administration route of SERMs could also have a strong impact in the prevention of BC at early development stages and could help to ameliorate the mortality and morbidity related to this disease.

Boosting the photodynamic activity of erythrosine B by using thermoresponsive and adhesive systems containing cellulose derivatives for topical delivery.

Erythrosine displays potential photodynamic activity against microorganisms and unhealthy cells. However, erythrosine has high hydrophilicity, negatively impacting on permeation through biological membranes. Combining biological macromolecules and thermoresponsive polymers may overcome these erythrosine-related issues, enhancing retention of topically applied drugs. The aim of this work was to investigate the performance of adhesive and thermoresponsive micellar polymeric systems, containing erythrosine in neutral (ERI) or disodium salt (ERIs) states. Optimized combinations of poloxamer 407 (polox407) and sodium carboxymethylcellulose (NaCMC) or hydroxypropyl methylcellulose (HPMC) were used as platforms for ERI/ERIs delivery. The rheological and mechanical properties of the systems was explored. Most of the formulations were plastic, thixotropic and viscoelastic at 37 °C, with suitable gelation temperature for in situ gelation. Mechanical parameters were reduced in the presence of the photosensitizer, improving the softness index. Bioadhesion was efficient for all hydrogels, with improved parameters for mucosa in contrast to skin. Formulations composed of 17.5 % polox407 and 3 % HPMC or 1 % NaCMC with 1 % (w/w) ERI/ERIs could release the photosensitizer, reaching different layers of the skin/mucosa, ensuring enough production of cytotoxic species for photodynamic therapy. Functional micelles could boost the photodynamic activity of ERI and ERIs, improving their delivery and contact time with the cells.

UV-Accelerated Synthesis of Gold Nanoparticle-Pluronic Nanocomposites for X-ray Computed Tomography Contrast Enhancement.

Eco-friendly chemical methods using FDA-approved Pluronic F127 (PLU) block copolymer have garnered much attention for simultaneously forming and stabilizing Au nanoparticles (AuNPs). Given the remarkable properties of AuNPs for usage in various fields, especially in biomedicine, we performed a systematic study to synthesize AuNP-PLU nanocomposites under optimized conditions using UV irradiation for accelerating the reaction. The use of UV irradiation at 254 nm resulted in several advantages over the control method conducted under ambient light (control). The AuNP-PLU-UV nanocomposite was produced six times faster, lasting 10 min, and exhibited lower size dispersion than the control. A set of experimental techniques was applied to determine the structure and morphology of the produced nanocomposites as affected by the UV irradiation. The MTT assay was conducted to estimate IC50 values of AuNP-PLU-UV in NIH 3T3 mouse embryonic fibroblasts, and the results suggest that the sample is more compatible with cells than control samples. Afterward, in vivo maternal and fetal toxicity assays were performed in rats to evaluate the effect of AuNP-PLU-UV formulation during pregnancy. Under the tested conditions, the treatment was found to be safe for the mother and fetus. As a proof of concept or application, the synthesized Au:PLU were tested as contrast agents with an X-ray computed tomography scan (X-ray CT).

Pluronic F127 and P104 Polymeric Micelles as Efficient Nanocarriers for Loading and Release of Single and Dual Antineoplastic Drugs.

The potential application of biodegradable and biocompatible polymeric micelles formed by Pluronic F127 and P104 as nanocarriers of the antineoplastic drugs docetaxel (DOCE) and doxorubicin (DOXO) is presented in this work. The release profile was carried out under sink conditions at 37 °C and analyzed using the Higuchi, Korsmeyer-Peppas, and Peppas-Sahlin diffusion models. The cell viability of HeLa cells was evaluated using the proliferation cell counting kit CCK-8 assay. The formed polymeric micelles solubilized significant amounts of DOCE and DOXO, and released them in a sustained manner for 48 h, with a release profile composed of an initial rapid release within the first 12 h followed by a much slower phase the end of the experiments. In addition, the release was faster under acidic conditions. The model that best fit the experimental data was the Korsmeyer-Peppas one and denoted a drug release dominated by Fickian diffusion. When HeLa cells were exposed for 48 h to DOXO and DOCE drugs loaded inside P104 and F127 micelles, they showed lower IC50 values than those reported by other researchers using polymeric nanoparticles, dendrimers or liposomes as alternative carriers, indicating that a lower drug concentration is needed to decrease cell viability by 50%.

Antimicrobial photodynamic therapy mediated by methylene blue-loaded polymeric micelles against Streptococcus mutans and Candida albicans biofilms.

BACKGROUND: Streptococcus mutans and Candida albicans can colonize the teeth, the oral cavity as biofilm and can cause oral infections. Thus, strategies to prevent and control oral biofilms are requested. The present study aims the development and characterization of methylene blue (MB)-loaded polymeric micelles for antimicrobial photodynamic therapy (aPDT) against Streptococcus mutans and Candida albicans biofilms METHODS: MB-loaded polymeric micelles were produced and characterized by particle size, polydispersity index, morphology, zeta potential, stability, MB release profile, and antimicrobial effect against S. mutans and C. albicans biofilms. RESULTS: MB-loaded polymeric micelles showed a reduced particle size, moderate polydisperse profile, spherical and neutral shape, which demonstrated to be promising features to allow micelles penetration into biofilms. Antimicrobial effect against bacterial and yeast biofilms was demonstrated once MB was irradiated by light under 660 nm (aPDT). Furthermore, MB-loaded polymeric micelles showed significant inhibition of S. mutans and C. albicans biofilms. Furthermore, the treatment with MB-micelles incubated with high pre-incubation times (15 and 30 min) were more effective than 5 min. It can be explained by the time required for this nanosystem to penetrate the innermost layer of biofilms and release MB for aPDT. CONCLUSION: MB-loaded polymeric micelles can effectively decrease the bacteria and yeast viability and it may cause positive impacts in the clinical practice. Thus, the developed formulation showed potential in the treatment to remove oral biofilms, but clinical studies are needed to confirm its potential.

Pluronic® triblock copolymer-based nanoformulations for cancer therapy: A 10-year overview.

This paper provides a review of the literature on the use of Pluronic® triblock copolymers for drug encapsulation over the last 10 years. A special focus is given to the progress of drug delivery systems (e.g., micelles, liposomes, micro/nanoemulsions, hydrogels and nanogels, and polymersomes and niosomes); the beneficial aspects of Pluronic® triblock copolymers as biological response modifiers and as pharmaceutical additives, adjuvants, and stabilizers, are also discussed. The advantages and limitations encountered in developing site-specific targeting approaches based on Pluronic-based nanostructures in cancer treatment are highlighted, in addition to innovative examples for improving tumor cytotoxicity while reducing side effects.

Selective photodynamic effects on cervical adenocarcinoma cells provided by F127 Pluronic®-based micelles modulating hypericin delivery

Abstract Cervical cancer is a leading cause of death among women. The endocervical adenocarcinoma (ECA) represents an aggressive and metastatic type of cancer with no effective treatment options currently available. We evaluated the antitumoral and anti-migratory effects of hypericin (HYP) encapsulated on Pluronic F127 (F127/HYP) photodynamic therapy (PDT) against a human cell line derived from invasive cervical adenocarcinoma (HeLa) compared to a human epithelial cell line (HaCaT). The phototoxicity and cytotoxicity of F127/HYP were evaluated by the following assays: colorimetric assay, MTT, cellular morphological changes by microscopy and long-term cytotoxicity by clonogenic assay. In addition, we performed fluorescence microscopy to analyze cell uptake and subcellular distribution of F127/HYP, cell death pathway and reactive oxygen species (ROS) production. The PDT mechanism was determined with sodium azide and D-mannitol and cell migration by wound-healing assay. The treatment with F127/HYP promoted a phototoxic result in the HeLa cells in a dose-dependent and selective form. Internalization of F127/HYP was observed mainly in the mitochondria, causing cell death by necrosis and ROS production especially by the type II PDT mechanism. Furthermore, F127/HYP reduced the long-term proliferation and migration capacity of HeLa cells. Overall, our results indicate a potentially application of F127/HYP micelles as a novel approach for PDT with HYP delivery to more specifically treat ECA.

Thermosensitive Injectable Hydrogels for Intra-Articular Delivery of Etanercept for the Treatment of Osteoarthritis.

The intra-articular administration of drugs has attracted great interest in recent decades for the treatment of osteoarthritis. The use of modified drugs has also attracted interest in recent years because their intra-articular administration has demonstrated encouraging results. The objective of this work was to prepare injectable-thermosensitive hydrogels for the intra-articular administration of Etanercept (ETA), an inhibitor of tumor necrosis factor-α. Hydrogels were prepared from the physical mixture of chitosan and Pluronic F127 with ß-glycerolphosphate (BGP). Adding ß-glycerolphosphate to the system reduced the gelation time and also modified the morphology of the resulting material. In vitro studies were carried out to determine the cytocompatibility of the prepared hydrogels for the human chondrocyte line C28/I2. The in vitro release study showed that the incorporation of BGP into the system markedly modified the release of ETA. In the in vivo studies, it was verified that the hydrogels remained inside the implantation site in the joint until the end of the study. Furthermore, ETA was highly concentrated in the blood of the study mice 48 h after the loaded material was injected. Histological investigation of osteoarthritic knees showed that the material promotes cartilage recovery in osteoarthritic mice. The results demonstrate the potential of ETA-loaded injectable hydrogels for the localized treatment of joints.

Aqueous mixtures of cornstarch and Pluronic® F127 studied by experimental and computational techniques.

The possibility of interaction between cornstarch (CS) and amphiphilic molecules, such as the micelle-forming triblock copolymer Pluronic® F127 (F127), also known by Poloxamer 407, indicates that CS-F127 aqueous mixtures can regulate either the starch solubility or the copolymer micellization. Herein experimental and computational techniques were used to investigate CS-F127 aqueous mixtures aiming to highlight the role of these compounds on the molecular complexation. Dynamic light scattering results show that CS in water is highly polydisperse, while the F127 concentration and temperature influence the micellization process and the interaction with CS. Circular dichroism data of CS supernatants indicate the existence of small helical-like granules (Dh ≈ 800 nm) in the CS-F127 mixed aqueous solutions at 25 °C. UV-Vis spectrophotometry shows a small absorption band around 267 or 275 nm characteristic of micelles, granules, or molecular complexes, while FTIR and X-ray diffractometry indicate negligible structural changes. Lugol iodine tests at 25 °C show that both the precipitate and supernatant in the mixtures undergo some structural changes also indicating molecular complexation. Molecular dynamic simulations show the formation of stabilized inclusion complexes (V-amylose), where the propylene oxide segment of the copolymer inside the amylose helix and the ethylene oxide branches facing the aqueous media. These results together reveal weak CS-F127 interactions, evidencing a small solubility of CS both in the absence and presence of F127 as a solubilizing agent. Furthermore, moderate CS amounts do not change the F127 micelle structure.

Effects of hypericin encapsulated on Pluronic F127 photodynamic therapy against triple negative breast cancer.

OBJECTIVE: Breast cancer (BC) currently has no effective treatment especially for the highly aggressive and metastatic triple negative breast cancer (TNBC). Here, we investigated the antitumoral and antimigratory effects of hypericin (HYP) encapsulated on Pluronic F127 (F127/HYP) photodynamic therapy (PDT) against TNBC cell line MDA-MB-231 compared to a nontumorigenic human breast ductal cell line (MCF-10A). METHODS: The phototoxicity/cytotoxicity was assessed by MTT assay, long-term cytotoxicity by clonogenic assay, cell uptake, subcellular distribution, and cellular oxidative stress by fluorescence microscopy, cell death with annexin V-FITC/propidium iodide, PDT mechanism using sodium azide and D-mannitol, and cell migration by wound-healing assay. RESULTS: The treatment promoted phototoxic effect on tumor cell line in a dose-dependent and selective manner. Internalization of F127/HYP was efficient and accumulation occurred in the endoplasmic reticulum and mitochondria, resulting in cellular oxidative stress mainly by the type II mechanism, induced by necrosis. Furthermore, F127/HYP decreased colony formation and reduced the cell migration ability in MDA-MB-231 cells. CONCLUSION: Our results suggest a potentially useful role of F127/HYP micelles as a platform for HYP delivery to more specifically and effectively treat TNBC.

Interaction of triblock copolymers (Pluronic®) with DMPC vesicles: a photophysical and computational study.

Pluronic/lipid mix promises stealth liposomes with long circulation time and long-term stability for pharmaceutical applications. However, the influence of Pluronics on several aspects of lipid membranes has not been fully elucidated. Herein it was described the effect of Pluronics on the structured water, alkyl chain conformation, and kinetic stability of dimyristoylphosphatidylcholine (DMPC) liposomes using interfacial and deeper fluorescent probes along with computational molecular modeling data. Interfacial water changed as a function of Pluronics' hydrophobicity with polypropylene oxide (PPO) anchoring the copolymers in the lipid bilayer. Pluronics with more than 30-40 PO units had facilitated penetration at the bilayer while shorter PPO favored a more interfacial interaction. Low Pluronic concentrations provided long-term stability of vesicles by steric effects of polyethylene oxide (PEO), but high amounts destabilized the vesicles as a sum of water-bridge cleavage at the polar head group and the reduced alkyl-alkyl interactions among the lipids. The high kinetic stability of Pluronic/DMPC vesicles is a proof-of-concept of its advantages and applicability in nanotechnology over conventional liposome-based pharmaceutical products for future biomedical applications.

Fabrication data of two light-responsive systems to release an antileishmanial drug activated by infrared photothermal heating.

The data provided in this study are related to the fabrication of two light-responsive systems based on reduced graphene oxide (rGO) functionalized with the polymers Pluronic P123 (P123), rGO-P123, and polyethyleneimine (PEI), rGO-PEI, and loaded with amphotericin B (AmB), an antileishmanial drug. Here are described the experimental design to obtain the systems and characterization methods, such as Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR), Raman Spectroscopy, Powder X-Ray Diffraction, Transmission Electron Microscopy, Scanning Electron Microscopy and Thermogravimetric Analyses. Also, AmB spectroscopy studies are described. The materials rGO-P123 and rGO-PEI were loaded with AmB and the optimization of AmB and polymer fragments structures revealed several possible hydrogen bonds formed between the materials and the drug. The drug release was analyzed with and without Near-Infrared (NIR) light. In the studies conducted under NIR light irradiation for 10 min, an infrared lamp was disposed at 64 cm from the samples and an optical fiber thermometer was employed to measure the temperature variation. Cytotoxicity studies and antiproliferative assays against Leishmania amazonensis promastigotes were evaluated. The complete work data entitled Amphotericin-B-Loaded Polymer-Functionalized Reduced Graphene Oxides for Leishmania amazonensis Chemo-Photothermal Therapy have been published to Colloids and Surfaces B: Bionterfaces (https://doi.org/10.1016/j.colsurfb.2021.112169) [1].

Chitosan/Pluronic F127 Thermosensitive Hydrogel as an Injectable Dexamethasone Delivery Carrier.

Intra-articular administration of anti-inflammatory drugs is a strategy that allows localized action on damaged articular cartilage and reduces the side effects associated with systemic drug administration. The objective of this work is to prepare injectable thermosensitive hydrogels for the long-term application of dexamethasone. The hydrogels were prepared by mixing chitosan (CS) and Pluronic-F127 (PF) physically. In addition, tripolyphosphate (TPP) was used as a crosslinking agent. Chitosan added to the mix increased the gel time compared to the pluronic gel alone. The incorporation of TPP into the material modified the morphology of the hydrogels formed. Subsequently, MTS and Live/Dead® experiments were performed to investigate the toxicity of hydrogels against human chondrocytes. The in vitro releases of dexamethasone (DMT) from CS-PF and CS-PF-TPP gels had an initial burst and took more time than that from the PF hydrogel. In vivo studies showed that hydrogels retained the fluorescent compound longer in the joint than when administered in PBS alone. These results suggest that the CS-PF and CS-PF-TPP hydrogels loaded with DMT could be a promising drug delivery platform for the treatment of osteoarthritis.

Luminescence Properties and Energy Transfer of Eu3+, Bi3+ Co-Doped LuVO4 Films Modified with Pluronic F-127 Obtained by Sol-Gel.

Nowadays, orthovanadates are studied because of their unique properties for optoelectronic applications. In this work, the LuVO4:Eu3+, Bi3+ films were prepared by the sol-gel method, using a new simple route, and deposited by the dip-coating technique. The obtained films are transparent, fracture-free, and homogenous. The sol-gel process was monitored by Fourier-transform infrared spectroscopy (FTIR), and according to X-ray diffraction (XRD) results, the crystal structure was tetragonal, and films that were highly oriented along the (200) low-energy direction were obtained. The morphological studies by scanning electron microscopy (SEM) showed uniformly distributed circular agglomerations of rice-like particles with nanometric sizes. The luminescence properties of the films were analyzed using a fixed concentration of 2.5 at. % Eu3+ and different concentrations of Bi3+ (0.5, 1.0, and 1.5 at. %); all the samples emit in red, and it has been observed that the light yield of Eu3+ is enhanced as the Bi3+ content increases when the films are excited at 350 nm, which corresponds to the 1S0→3P1 transition of Bi3+. Therefore, a highly efficient energy transfer mechanism between Bi3+ and Eu3+ has been observed, reaching up to 71%. Finally, it was established that this energy transfer process occurs via a quadrupole-quadrupole interaction.

Cytotoxic activity of butanolic extract from Sambucus nigra L. flowers in natura and vehiculated in micelles in bladder cancer cells and fibroblasts.

Bladder cancer has a high incidence and recurrence rate among patients worldwide. This study aimed to evaluate the cytotoxic activity of fractions of Sambucus nigra L. flower extracts on bladder carcinoma cells (T24 cells) and human fibroblast cells (MRC-5). The butanolic fraction (F-BuOH) was characterized by UPLC-DAD-MS/MS and nine flavonoids were identified. Rutin was the major compound. The cytotoxic activity of this fraction was observed in the T24 cells but not in MRC-5 cells, indicating selectivity. F-BuOH was incorporated in micellar solutions of Pluronic® F127 and cytotoxic effect for T24 cells was observed again. In vitro assay demonstrated a controlled release of the fraction from the micelles. The results obtained showed that flavonoids are the possible responsible for cytotoxic activity in bladder carcinoma cells. In addition, micellar solutions act together to increase the action of the butanolic fraction.

Design of Hybrid Polymeric-Lipid Nanoparticles Using Curcumin as a Model: Preparation, Characterization, and In Vitro Evaluation of Demethoxycurcumin and Bisdemethoxycurcumin-Loaded Nanoparticles.

Polymeric lipid hybrid nanoparticles (PLHNs) are the new generation of drug delivery systems that has emerged as a combination of a polymeric core and lipid shell. We designed and optimized a simple method for the preparation of Pluronic F-127-based PLHNs able to load separately demethoxycurcumin (DMC) and bisdemethoycurcumin (BDM). CUR was used as a model compound due to its greater availability from turmeric and its structure similarity with DMC and BDM. The developed method produced DMC and BDM-loaded PLHNs with a size average of 75.55 ± 0.51 and 15.13 ± 0.014 nm for DMC and BDM, respectively. An FT-IR analysis confirmed the encapsulation and TEM images showed their spherical shape. Both formulations achieved an encapsulation efficiency ≥ 92% and an exhibited significantly increased release from the PLHN compared with free compounds in water. The antioxidant activity was enhanced as well, in agreement with the improvement in water dissolution; obtaining IC50 values of 12.74 ± 0.09 and 16.03 ± 0.55 for DMC and BDM-loaded PLHNs, respectively, while free curcuminoids exhibited considerably lower antioxidant values in an aqueous solution. Hence, the optimized PHLN synthesis method using CUR as a model and then successfully applied to obtain DMC and BDM-loaded PLHNs can be extended to curcuminoids and molecules with a similar backbone structure to improve their bioactivities.

The effect of erythrosine-B on the structuration of poloxamer 407 and cellulose derivative blends: In silico modelling supporting experimental studies.

Erythrosine is a dye approved for medical use that has shown promising photodynamic activity, allowing for the inactivation of microorganisms and activity against malignant cells. Despite the great photodynamic potential, erythrosine exhibits hydrophilicity, negatively impacting its action in biological membranes. Therefore, the incorporation of erythrosine in micellar polymeric systems, such as poloxamers, may overcome this limitation. Moreover, using bioadhesive and thermoresponsive polymers to combine in situ gelation and bioadhesion may enhance retention of this topically applied drug. In this work, mucoadhesive and thermoresponsive micellar systems were prepared containing erythrosine in two states: the native form (ERI) and the disodium salt (ERIs). The systems were evaluated based on the effect of ERI/ERIs on the micellar structure of the binary polymer mixtures. Optimised combinations of poloxamer 407 (polox407) and mucoadhesive sodium carboxymethylcellulose (NaCMC) or hydroxypropyl methylcellulose (HPMC) were used as micellar systems for ERI or ERIs delivery. The systems were studied with respect to theoretical interactions, qualitative composition, morphology, and micellar properties. In silico modelling indicated a higher interaction of the drug with poly(ethylene oxide) (PEO) than poly(propylene oxide) (PPO) fragments of polox407. Systems containing NaCMC displayed a repulsive effect in the presence of erythrosine, due to the polymer's charge density. Both systems could convert the photosensitizer in its monomeric form, ensuring photodynamic activity. In these mixtures, crystallinity, critical micellar temperature and enthalpy of polox407 micellisation were reduced, and micellar size, evaluated by transmission electron microscopy (TEM), showed low impact of ERI/ERIs in HPMC preparations. Aiming toward photodynamic applications, the findings showed how ERI or ERIs can affect the micellar formation of gels composed of 17.5% (w/w) polox407 and 3% (w/w) HPMC or 1% (w/w) NaCMC, important for understating their behaviour and future utilisation as erythrosine delivery systems.

Magnetic Characterization by Scanning Microscopy of Functionalized Iron Oxide Nanoparticles.

This study aimed to systematically understand the magnetic properties of magnetite (Fe3O4) nanoparticles functionalized with different Pluronic F-127 surfactant concentrations (Fe3O4@Pluronic F-127) obtained by using an improved magnetic characterization method based on three-dimensional magnetic maps generated by scanning magnetic microscopy. Additionally, these Fe3O4 and Fe3O4@Pluronic F-127 nanoparticles, as promising systems for biomedical applications, were prepared by a wet chemical reaction. The magnetization curve was obtained through these three-dimensional maps, confirming that both Fe3O4 and Fe3O4@Pluronic F-127 nanoparticles have a superparamagnetic behavior. The as-prepared samples, stored at approximately 20 °C, showed no change in the magnetization curve even months after their generation, resulting in no nanoparticles free from oxidation, as Raman measurements have confirmed. Furthermore, by applying this magnetic technique, it was possible to estimate that the nanoparticles' magnetic core diameter was about 5 nm. Our results were confirmed by comparison with other techniques, namely as transmission electron microscopy imaging and diffraction together with Raman spectroscopy. Finally, these results, in addition to validating scanning magnetic microscopy, also highlight its potential for a detailed magnetic characterization of nanoparticles.