Variation of OXIS contact areas in primary molars among 3-6-year-old children with intraoral digital scanning.

PURPOSE: To determine the variation of OXIS contact areas in primary molars using digital impressions generated from an intraoral scanner (IOS). METHODS: A cross-sectional study was carried out on 214 caries-free posterior quadrants of 80 children (38 males and 42 females) aged 3-6 years. Calibration of taking digital impressions with the IOS procedure was performed initially through scanning of ten quadrants of children to provide a learning environment to the examiner. The digital impressions were then exported, and the type of interproximal contact areas present between the distal surface of the primary first molar and the mesial surface of the primary second molar were identified according to the OXIS classification. The prevalence of the types of OXIS contact areas was expressed in the form of numbers and percentages. The chi-square test was applied to investigate the variability among the arches and to understand the association of OXIS contact areas across age, gender, and arches. RESULTS: The most common contact area type observed was I-type (59.8%), followed by S-type (15.4%), X-type (12.6%), and O-type (12.2%). The I-type contact area was most frequently seen in both males (51.6%) and females (65.5%), while the S-type contact area in males (14.7%) and X-type contact area in females (8.4% each) were the least frequent with no statistical significance between genders (p > 0.05). All three age groups studied showed the highest prevalence of the I-type contact area, which increased with an increase in age (p < 0.05). The inter-arch comparison showed a significant result in terms of the X-type contact area on the right side, and O-type, X-type, and I-type contact areas on the left side, while no statistical difference was seen in the intra-arch comparison for all contact types. CONCLUSION: I-type contact areas were the most prevalent across the arches, age groups and genders.

Treatment outcomes of pulpotomy versus pulpectomy in vital primary molars diagnosed with symptomatic irreversible pulpitis: protocol for a non-inferiority randomised controlled trial.

BACKGROUND: Pulpectomy continues to be the standard treatment recommendation for management of vital primary molars diagnosed with symptomatic irreversible pulpitis. The recent decade has seen a paradigm shift in the treatment concepts of how vital mature permanent molars diagnosed with irreversible pulpitis can be more conservatively managed using vital pulp therapy techniques like pulpotomy. However, despite emerging evidence indicating similarities between primary and permanent tooth pulp response to dental caries, there is limited research on whether pulpotomy can be similarly used as a definitive treatment modality for vital primary teeth with irreversible pulpitis. This randomised controlled trial (RCT) aims to compare the treatment effectiveness of pulpotomy versus pulpectomy in management of vital primary molars diagnosed with symptomatic irreversible pulpitis over a two-year period. METHODS/DESIGN: This clinical study is a parallel, two-armed, open label, non-inferiority RCT with a 1:1 allocation ratio between the experimental intervention arm (pulpotomy) and the active comparator arm (pulpectomy). Healthy cooperative children, between 4-9 years of age, who have painful primary molars with clinical symptoms typical of irreversible pulpitis will be recruited after obtaining informed consent from their parents/legal guardians. 50 vital primary molars clinically diagnosed with symptomatic irreversible pulpitis will be randomly distributed between the two treatment arms. The primary outcomes that will be assessed are clinical and radiographic success after six-months, one-year and two-years of the trial interventions. The influence of baseline pre-operative variables (age; gender; tooth type; site of caries; pre-operative furcal radiolucency; pre-operative pain intensity) and intra-operative factors (time taken to achieve haemostasis) on treatment outcomes will also be assessed. The secondary outcome evaluated will be the immediate (24 h and 7 d) post-operative pain relief afforded by the two treatment interventions. DISCUSSION: This trial seeks to provide evidence on whether pulpotomy treatment can be no worse than the standard pulpectomy treatment for the management of symptomatic irreversible pulpitis in vital primary molars. TRIAL REGISTRATION: ClinicalTrials.gov (NCT06183203). Registered on 30 January 2024.

Development of 'OXIS Classification' calibration website for dental researchers.

PURPOSE: The variations in interproximal contact areas have been categorised open (O), point (X), straight (I), and curved contact (S). This is based on their shapes and termed as OXIS classification. The interactive OXIS calibration website was developed to assist researchers seeking appropriate knowledge, minimise the overload of material, optimise efficiency in calibration and, to provide repositories for clinicians, healthcare workers, and policymakers. METHODS: The website was developed in two phases. The first phase of development included expert group discussion, Focus Group Discussion (FGD), and the implementation of FGD recommendations. The second phase emphasised registration and development of the interactive web portal on OXIS classification. The developed website was subjected to user experience testing, functional testing, performance testing, security testing, device, platform testing, and then hosted. Calibrated students and faculties evaluated it with the help of Suitability Assessment of Materials (SAM) and System Usability Scale (SUS). Finally, after amendments, the website was evaluated by non-calibrated researchers and multidisciplinary experts. RESULTS: The total agreement was 74% for overall SAM category. Pooled mean total score of SUS was 52.7 (SD 7.17; range 45-67.5), indicating an average score. CONCLUSION: The content of the developed website has been evaluated as "satisfactory" and its technical quality as "of higher standards".

Hypomineralised second primary molars: the Würzburg concept.

PURPOSE: In addition to molar incisor hypomineralisation, the occurrence of enamel hypomineralisation in the primary dentition has become increasingly important in recent years. Hypomineralised second primary molar (HSPM) is defined as hypomineralisation of systemic origin affecting from one to all four second primary molars. Some years ago, the "Würzburg concept" was introduced, which proposed a grading of MIH findings (MIH treatment need index) in combination with an appropriate treatment plan depending on the severity of the affected tooth. Recently, this concept was updated and new treatment approaches have been added. However, currently, the concept solely addresses the treatment plan for permanent teeth. As there is a need to expand its scope to encompass primary teeth and, consequently, HSPM, this paper seeks to develop the second component of the Würzburg concept, the treatment plan, for the primary dentition in response to the increased focus on the disease in recent years. Although the evidence base for the different treatment options is still weak, there is a need for guidance for clinicians in their day-to-day practice. METHODS: The authors conducted a comprehensive review of the literature, encompassing clinical and laboratory studies along with published guidelines. RESULTS: The treatment plan of the HSPM Würzburg concept contains prophylactic and regenerative aspects, non-invasive interventions, temporary and permanent restorative techniques, and extraction. CONCLUSIONS: The intention is to provide practical guidance to practitioners, acknowledging the necessity for further validation through clinical trials.

Two-year clinical and radiographic evaluation of ACTIVA BioACTIVE versus Compomer (Dyract® eXtra) in the restoration of class-2 cavities of primary molars: a non-inferior split-mouth randomised clinical trial.

OBJECTIVES: The trial aimed to compare the clinical performance and radiographic success of ACTIVA BioACTIVE versus Compomer in restoring class-II cavities of primary molars. MATERIALS AND METHODS: A non-inferior split-mouth design was considered. A pre-calculated sample size of 96 molars (48 per group) with class-2 cavities of twenty-one children whose ages ranged from 5 to 10 years were randomly included in the trial. Pre-operative Plaque Index (PI), DMFT/dmft scores and the time required to fill the cavity were recorded. Over 24 months, the teeth were clinically evaluated every six months and radiographically every 12 months by two calibrated and blinded evaluators using the United States public health service (USPHS)-Ryge criteria. The two-sided 95% confidence interval (CI) for the difference in success rate was considered to assess non-inferiority, and the margin was set at -18%. The linear mixed model and Firth's logistic regression model were used for data analysis (P < 0.05). RESULTS: After 24 months, 86 teeth (43 per group) were evaluated. The mean PI score was 1.1(± 0.9), while DMFT/dmft was 0.35 (± 0.74) and 6.55 (± 2.25) respectively. The clinical and radiographic success rate of Dyract vs. ACTIVA was 95.3% and 88.3% vs. 93% and 86%, respectively. The two-sided 95% CI for the difference in success rate (-2.3%) was - 3.2 to 1.3% and didn't reach the predetermined margin of -18% which had been anticipated as the non-inferiority margin. Clinically, ACTIVA had a significantly better colour match (P = 0.002) but worse marginal discolouration (P = 0.0143). There were no significant differences regarding other clinical or radiographic criteria (P > 0.05). ACTIVA took significantly less placement time than Dyract, with a mean difference of 2.37 (± 0.63) minutes (P < 0.001). CONCLUSION: The performance of ACTIVA was not inferior to Dyract and both materials had a comparable high clinical and radiographic performance in children with high-caries experience. ACTIVA had a significantly better colour match but more marginal discolouration. It took significantly less time to be placed in the oral cavity. TRIAL REGISTRATION: The study was registered at ClinicalTrials.gov on 4 May 2018 (#NCT03516838).

Elimination of E. faecalis with NaOCl versus chlorhexidine gluconate from primary molar root canal systems: an ex vivo model study.

OBJECTIVES: This ex vivo human study aimed to evaluate the efficacy of NaOCl and chlorhexidine gluconate (CHG) irrigations in eliminating Enterococcus faecalis from the RCS of primary molars. MATERIALS AND METHODS: Disinfected extracted primary molars were inoculated with E. faecalis for 24 h. Then, the RCS samples were then irrigated with either 2.5% NaOCl, 0.2% and 2% CHG, or sham saline. The samples were collected immediately after irrigation; and 24 h later, the bacterial viability and counts were measured using blood agar and qRT-PCR, respectively. Histological sections were used to measure E. faecalis penetration and viability in dentin tubules using fluorescence microscopy. RESULTS: The recovery of viable E. faecalis after the irrigation of the primary molars showed more significant bactericidal effects of NaOCl and 0.2% and 2% CHG than of saline. Immediately after the irrigation, the NaOCl group showed the greatest reduction in E. faecalis; and 24 h later, all the groups had lower viable E. faecalis than the saline control. The bacterial penetration was also lowest in the NaOCl group, although there was no difference in bacterial viability in the tubules between the groups. CONCLUSION: In primary teeth, NaOCl and CHG showed similar degrees of bacterial elimination efficacy in terms of E.faecalis. CLINICAL RELEVANCE: Within the limitations of this study, NaOCl and CHG have the similar ability to perform endodontic irrigation of primary ex vivo teeth regarding the elimination of E.faecalis, but NaOCl penetrates dentin tubules better.

Comparative evaluation of hand and rotary file systems on dentinal microcrack formation during pulpectomy procedure in primary teeth: an in vitro study.

PURPOSE: Pulpectomy can be used for the management of deep dentinal carious lesions in primary teeth which can be restored. Mechanical preparation of root canals can be performed using hand or NiTi rotary files. However, this may cause dentinal stress and consequently dentinal microcracks. Hence, the aim was comparative evaluation of hand and rotary file systems on dentinal microcrack formation during pulpectomy procedure in primary teeth. METHODS: 60 extracted primary molar teeth were selected comprising of 80 root canals. Simple random sampling was used to divide root canals into four groups (n = 20): Group A-Hedstrom file, Group B-Pro AF Baby Gold rotary, Group C-ProTaper Next rotary, and Group D-unprepared group. Assessment was conducted on presence or absence of microcracks using Chi square test (p < 0.05). RESULTS: The total number of microcracks in Group A: one (5%), Group B: four (20%), Group C: nine (45%) and Group D: zero (0%) which was statistically significant (p = 0.002). At cervical third, the number of microcracks seen with Group A: one (5%), Group B: zero (0%), Group C: five (25%) and Group D: zero (0%) (p = 0.005). At the middle third, the number of microcracks seen in Group A: zero (0%), Group B: four (20%), Group C: four (20%) and Group D: zero (0%) (p = 0.029). CONCLUSION: The study concluded that dentinal microcracks are formed with both hand and rotary file systems in primary teeth. ProTaper Next showed significantly higher number of microcracks, followed by ProAF Baby Gold and H files.

Application of mineral trioxide aggregate pulpotomy in the treatment of early pulpitis of primary molars.

OBJECTIVE: To evaluate the effectiveness of mineral trioxide aggregate (MTA) on pulpotomy in primary molars. METHODS: Two hundred and sixty-three cases (310 teeth) of children with early pulpitis of primary molars admitted between February 2019 to February 2022 were enrolled, and their clinical data were retrospectively analyzed. Of them, 130 cases with 155 teeth treated with root canal treatment were set as the control group (CG) and 133 cases with 155 teeth receiving MTA pulpotomy were set as the observation group (OG). Clinical data such as efficacy evaluation, inflammatory factor levels, postoperative adverse reactions, and quality of life (QoL) were compared. RESULTS: After surgery, the overall response rate in the OG was statistically higher than that in the CG, while the levels of inflammatory factors in the OG were significantly lower than those in the CG (all P<0.05). Moreover, the total incidence of complications was significantly lower in OG at 3, 6, and 12 months after surgery (P=0.018, P=0.007, P=0.015, respectively). The QoL of the two groups differed insignificantly before surgery; however, after the treatment, the QoL in OG was significantly higher than those in the CG at 3, 6, and 12 months after surgery (P=0.037, P=0.012, P=0.028, respectively). Moreover, the teeth location and treatment method were independent factors of efficacy (P=0.047, P=0.001, respectively). CONCLUSIONS: MTA pulpotomy outperformed root canal treatment for superior efficacy in children with early pulpitis of primary molars, with a positive effect on improving QoL, and patient prognosis.

Fracture strength of preformed zirconia crown and CAD-CAM zirconia, ceramic, and hybrid composite crowns for the restoration of primary molars: An in vitro study.

BACKGROUND: Paediatric-preformed zirconia crowns have been associated with several issues, primarily their inability to be crimped and the need for extensive tooth preparation. Additionally, the capacity to adjust the size, shape, and fit of these crowns is very limited. AIM: To evaluate and compare the fracture strength of four different types of dental crowns intended for paediatric patients. DESIGN: The fracture resistance of four types of paediatric crowns was evaluated using the universal testing machine; freshly extracted primary molars received one of the following: preformed zirconia crowns, custom-made computer-aided design and computer-aided manufacturing (CAD-CAM) zirconia crowns, custom-made CAD-CAM ceramic crowns, and custom-made CAD-CAM hybrid composite crowns. Data were statistically compared using the Kruskal-Wallis test followed by the Bonferroni test, and the level of significance was set at 5%. RESULTS: Results showed that there was a statistically significant difference among the four groups (p < .001). The highest value of fracture force was observed for the milled zirconia crown and the lowest for the prefabricated zirconia. CONCLUSION: The implementation of the CAD-CAM digital crown fabrication technique has the potential to address issues associated with preformed crowns in paediatric patients, particularly in terms of fracture resistance.

Prevalence and clinical presentation of molar incisor hypomineralisation among a population of children in the community of Madrid.

OBJECTIVE: The main objective of this study was to estimate the prevalence of molar incisor hypomineralisation (MIH), an alteration of tooth enamel with an estimated worldwide prevalence rate of 14%, among children using primary care services in the Community of Madrid, Spain. MATERIALS AND METHODS: This was a descriptive, cross-sectional and multicentre study. After calibrating all researchers and following the diagnostic criteria of the European Academy of Paediatric Dentistry (EAPD), children aged between 8 and 16 years who were users of the dental services at 8 primary oral health units of the Madrid Health Service (SERMAS) were included. The children underwent a dental examination, and the parents were asked to complete a questionnaire. RESULTS: The prevalence of MIH was 28.63% (CI: 24.61-32.65%). The age cohorts most affected by MIH were 8 years (21.4%) and 11 years (20.7%). The presence of MIH was greater among girls (85; 60.71%) than among boys (55; 39.28%). The mean number of affected teeth per patient was 4.46 ± 2.8. The most frequently affected molar was the upper right first molar (74.3%), and the upper left central incisor was the most affected incisor (37.85%). Opacities were the defects most frequently recorded (63.57%). CONCLUSIONS: The prevalence of MIH in this study is the highest of all relevant studies conducted in Spain.

Biodentine as a pulpotomy medicament for primary molars: a retrospective chart review.

This retrospective chart review study investigates the long-term clinical outcome of Biodentine® (Tricalcium silicate) as a medicament for pulpotomy in primary molars. Data in this retrospective study was collected from the dental records of all patients that had at least one primary molar receive pulpotomy treatment (CDT code: D3221) between 01 July 2012 and 01 July 2015. This data includes child's age, medical history, dental history, dental radiographs, pulpotomy procedure details and follow-up clinical notes. Kaplan-Meier Estimate was used to measure the fraction of successful pulpotomy procedures for up to 24 months. A total of 1758 pulpotomy procedures were performed on 1032 patients in our institute in the three-year period and 21.4% of them (N = 376) had follow-up dental records that qualified for the study. Eleven teeth out of 376 teeth were excluded from the statistical analysis due to loss of/broken stainless steel crowns (3.1%). Seventeen pulpotomy failures were identified out of the remaining 365 procedures. The survival probablity of using Biodentine® as a pulpotomy medicament is 96.3% for 18-month follow-up and 95.4% for 24-month follow-up. Biodentine®, a tricalcium silicate formulation, used as a pulpotomy medicament demonstrates a high clinical success rate (95.4%) over a 24-month peroid in primary molars.

Effect of audio distraction with thermomechanical stimulation on pain perception for inferior alveolar nerve block in children: a randomized clinical trial.

Background: Pain control is a crucial aspect of pediatric dentistry for patient management. Thermo-mechanical devices (Buzzy™ Pain Care Labs, USA) work on the concept of vibration and cooling and have shown promising results in pain control during local anesthesia in pediatric dentistry. On the other hand, audio distraction has also been used for pain management. The amount of pain endured is determined by the patient's perception and attentiveness. Thus, if audio function is added to the thermomechanical device it might increase its efficiency. Hence, the present study aimed to compare pain on injection using a thermo-mechanical device with and without audio during inferior alveolar nerve block (IANB) injection in children aged 5-10 years old. Methods: Twenty-eight children aged between 5 and 10 indicated for IANB were included in this randomized study. Children who were undergoing the dental procedure were divided into 2 groups, with 14 children in each group. The study group was the thermo-mechanical device with audio distraction; the control group was the thermo-mechanical device without audio distraction. IANB was administered. Subjective pain evaluation was performed using the Wong-Baker Faces Pain Rating Scale (WBFPR) and objective pain evaluation was done using the Faces, Leg, Activity, Consolability, Cry (FLACC) scale. Results: The outcome depicted a significant reduction in pain on injection for both objective and subjective evaluations in the thermo-mechanical device with an audio distraction group. Conclusions: Less pain on injection was observed, when a thermo-mechanical device was used with audio distraction for IANB procedures.

Clinical and Radiographic Evaluation of Nigella sativa and Aloe vera as Pulpotomy Medicaments in Primary Teeth: A Randomized Controlled Trial.

Aim: To evaluate the clinical and radiographic efficacy of Nigella sativa and Aloe vera as pulp medicaments in primary molars in comparison to formocresol. Materials and methods: This randomized controlled trial is a three-arm, parallel-group study. This research included 66 vital, carious primary molars that required pulpotomy treatment in 4-7-year-old children. Teeth were randomly assigned to one of the three groups: groups (1-3) Nigella sativa, Aloe vera, and formocresol, respectively. All teeth were covered with stainless steel crowns (SSC) after the pulpotomy procedure was done and were assessed clinically and radiographically at 3, 6, and 12 months following Zurn and Seale criteria. Results: After 12 months, the clinical success rate was found to be 40, 90, and 72.7% for Nigella sativa, Aloe vera, and formocresol groups, respectively. While the radiographic assessment showed a success rate of 20, 72.7, and 81.8%, respectively. Conclusion: Aloe vera can be considered as an alternative pulpotomy medicament to formocresol. On the other hand, Nigella sativa is not recommended to be used in pulpotomy procedures. Further long-term follow-up clinical studies and histological studies are recommended. Clinical significance: Although formocresol is the most popular used material in pulp therapy, concerns were raised regarding its toxicity and carcinogenicity by the International Agency for Research on Cancer (IARC). Consequently, herbal medicine is expanding rapidly worldwide nowadays and herbal extracts are suggested as an alternative to formocresol for their proposed antibacterial and anti-inflammatory properties. How to cite this article: Sharaf RM, Kabil NS, Youssef FS, et al. Clinical and Radiographic Evaluation of Nigella sativa and Aloe vera as Pulpotomy Medicaments in Primary Teeth: A Randomized Controlled Trial. Int J Clin Pediatr Dent 2023;16(S-2):S195-S201.

Comparative Evaluation of Effectiveness of TheraCal LC, MTA, and Calcium Hydroxide in Direct Pulp Capping in Primary Molars: Randomized Clinical Study.

Introduction: This study was performed to evaluate the clinical and radiographic effectiveness of TheraCal light cured (LC) comparison to mineral trioxide aggregate (MTA) and calcium hydroxide in direct pulp capping of primary molars over a period of 9 months. Materials and methods: A total of 90 primary molars from children aged between 5 and 8 years were included in this randomized clinical study based on inclusion and exclusion criteria and were randomly divided into three groups-group I, TheraCal LC; group II, MTA; and group III, calcium hydroxide. Direct pulp capping (DPC) was performed in noncontaminated pulpal exposure with hemostasis achieved within 2-3 minutes followed by restoring the tooth using glass ionomer cement (GIC). Subjects were followed up at 3, 6, and 9 months for clinical and radiographic evaluations. Results: At 9 months of follow-up, the overall success rate of direct pulp capping in groups I, II, and III were 60%, 72.41%, and 48.14%, respectively. Intergroup comparison showed nonsignificant differences (p >0.05). Conclusion: The outcomes of this study suggest the limited success of direct pulp capping in primary molars. However, among the three materials used in this study, MTA comparatively had better results. How to cite this article: Jha S, Namdev R, Singhal R, et al. Comparative Evaluation of Effectiveness of TheraCal LC, MTA, and Calcium Hydroxide in Direct Pulp Capping in Primary Molars: Randomized Clinical Study. Int J Clin Pediatr Dent 2023;16(S-2):S213-S219.

Use of the Hall Technique by dentists in East China: A questionnaire-based cross-sectional survey.

BACKGROUND: The Hall Technique (HT) is now regarded as one of the biological management options for carious primary molars and has shown significant clinical success. AIM: To investigate the perception and the use of the HT among dentists engaging in paediatric dentistry in East China. DESIGN: This was an electronic questionnaire-based cross-sectional study. A quick response code of the questionnaire via WeChat, a common communication tool in China, was sent to dentists in East China. RESULTS: A total of 313 dentists participated in this study. Most surveyed clinicians had heard about the HT (n = 286, 91.4%). Of them, 40.2% (n = 115) reported having used the HT. Of 67 dentists working in private clinics, 34 (50.7%) had used the HT, whereas only 37% of dentists from public hospitals had used the HT. Of 115 dentists having used the HT, 91.3% (n = 105) would consider using the HT for Class II cavitated molars; 23.5% (n = 27) would consider using the HT for Class I cavitated molars. Most dentists who had not used the HT were concerned about complications such as pulp inflammation or necrosis after applying the HT. CONCLUSION: The HT is well known in East China; the lack of systematic training or courses, however, may decrease its utilization.

Limas rotatorias de uso en Odontopediatría: revisión de la literatura / Rotary files for use in pediatric dentistry: Literature review

Introducción: Los dientes primarios juegan un importante papel en el crecimiento y desarrollo general de los niños, por lo que es necesario conservarlos hasta el momento de su recambio fisiológico. Cuando existe una afectación pulpar que compromete la vitalidad del diente, la pulpectomía se convierte en un reto para el odontopediatra debido a la compleja anatomía radicular de los dientes primarios. En esta revisión bibliográfica se darán a conocer diferentes sistemas de limas usados en odontopediatría, y así brindar una mirada actualizada de la instrumentación rotatoria al realizar pulpectomías en los molares primarios. Material y Método: se realizó una búsqueda bibliográfica en Pubmed y Web of Science de acuerdo con criterios de inclusión y exclusión previamente establecidos. Resultados: tras aplicar los criterios de inclusión y exclusión fueron seleccionados un total de 30 referencias bibliográficas de los últimos 15 años. Conclusión: las limas rotatorias pediátricas pueden considerarse alternativas seguras y más eficientes en la realización de pulpectomías en molares primarios, ya que se reduce el tiempo de tratamiento, se produce desbridamiento completo de los conductos y se mantiene la función del diente hasta su exfoliación. (AU)

Introduction: Primary teeth play an important role in the growth and development of children, so it is necessary to keep them until the moment of their physiological replacement. When there is a pulp involvement that compromises the vitality of the tooth, pulpectomy treatment becomes a challenge for the pediatric dentist due to the complex root anatomy of primary teeth. This review of the literature will present different file systems used in primary teeth and provide an updated look at rotary instrumentation when performing pulpectomies on primary molars. Material and Method: a bibliographic search was carried out in Pubmed and Web of Science according to previously established inclusion and exclusion criteria. Results: after applying the inclusion and exclusion criteria, a total of 30 bibliographic references from the last 15 years were selected. Conclusion: pediatric rotary files can be considered safe and more efficient alternatives in performing pulpectomies on primary molars, due to treatment time is reduced, complete debridement of the root canals is produced, and tooth function is maintained until exfoliation. (AU)

Limas rotatorias de uso en Odontopediatría: revisión de la literatura / Rotary files for use in pediatric dentistry: Literature review

Introducción: Los dientes primarios juegan un importante papel en el crecimiento y desarrollo general de los niños, por lo que es necesario conservarlos hasta el momento de su recambio fisiológico. Cuando existe una afectación pulpar que compromete la vitalidad del diente, la pulpectomía se convierte en un reto para el odontopediatra debido a la compleja anatomía radicular de los dientes primarios. En esta revisión bibliográfica se darán a conocer diferentes sistemas de limas usados en odontopediatría, y así brindar una mirada actualizada de la instrumentación rotatoria al realizar pulpectomías en los molares primarios. Material y Método: se realizó una búsqueda bibliográfica en Pubmed y Web of Science de acuerdo con criterios de inclusión y exclusión previamente establecidos. Resultados: tras aplicar los criterios de inclusión y exclusión fueron seleccionados un total de 30 referencias bibliográficas de los últimos 15 años. Conclusión: las limas rotatorias pediátricas pueden considerarse alternativas seguras y más eficientes en la realización de pulpectomías en molares primarios, ya que se reduce el tiempo de tratamiento, se produce desbridamiento completo de los conductos y se mantiene la función del diente hasta su exfoliación. (AU)

Introduction: Primary teeth play an important role in the growth and development of children, so it is necessary to keep them until the moment of their physiological replacement. When there is a pulp involvement that compromises the vitality of the tooth, pulpectomy treatment becomes a challenge for the pediatric dentist due to the complex root anatomy of primary teeth. This review of the literature will present different file systems used in primary teeth and provide an updated look at rotary instrumentation when performing pulpectomies on primary molars. Material and Method: a bibliographic search was carried out in Pubmed and Web of Science according to previously established inclusion and exclusion criteria. Results: after applying the inclusion and exclusion criteria, a total of 30 bibliographic references from the last 15 years were selected. Conclusion: pediatric rotary files can be considered safe and more efficient alternatives in performing pulpectomies on primary molars, due to treatment time is reduced, complete debridement of the root canals is produced, and tooth function is maintained until exfoliation. (AU)

Cone-Beam Computed Tomography Evaluation of Rotary MM Files vs Manual K Files in Primary Molars: An In Vitro Study.

AIM: Rotary instrumentation in pediatric dentistry is an emerging concept, thus this study was performed to evaluate the remaining dentine thickness (RDT), canal transportation, centering ability, quality of obturation using cone-beam computed tomography (CBCT), and the time efficiency of rotary versus manual instrumentation in mandibular second primary molars. MATERIALS AND METHODS: Forty mandibular primary second molars (160 canals) were randomly and equally allocated to four groups. Instrumentation was done using K files in groups I and II; in each group, the obturation was done by two different obturation techniques; incremental technique and disposable syringe technique, respectively. MM rotary files (Innovative Material and Devices, Inc. [IMD], Shanghai, China) were used in groups III and IV; in each group, the obturation was done by incremental technique and disposable syringe technique. Preoperative and postoperative CBCT scans were performed and evaluated for the RDT, centering ability, canal transportation, and the canal filling quality, which was assessed as (underfill, optimal fill, and overfill). Instrumentation time was recorded for groups I and II collectively (manual instrumentation), and groups II and III collectively (rotary instrumentation). Statistical analysis was done using Chi-square, ANOVA, and post hoc Tukey tests, at p < 0.05). RESULTS: The MM rotary file removed a significantly less amount of dentine at all levels specifically at the middle section (p = 0.003). The canal transportation was significantly higher in the manual group at the cervical level (p = 0.022). In all sections, the rotary group had significantly higher values of centering ratio than the manual group (p < 0.05), which means a lower deviation of rotary instruments. For both types of files, there was no significant difference between different obturation techniques (p > 0.05). Instrumentation time was significantly lower in the rotary group (p < 0.001). CONCLUSION: Regarding the dentine removal and the shaping ability of MM files acceptable results were obtained; however, no significant difference between the different obturation techniques. Notable time efficiency was reported in the rotary files as well. CLINICAL SIGNIFICANCE: The use of rotary files resulted in better conservation of tooth structure, better canal centering, and obturation quality as well as less canal transportation and less instrumentation time compared to manual K files.

What do we currently need to know about molar incisor hypomineralisation (MIH) and hypomineralized second primary molars (HSPM)? / Que faut-il savoir, à l'heure actuelle, sur les hypominéralisations molaires incisives (MIH) et les hypominéralisations des secondes molaires temporaires (HSPM) ?

Introduction: Molar incisor hypomineralization (MIH) and hypomineralized second primary molars (HSPM) are qualitative and asymmetric enamel defects. MIH affect at least one permanent first molar and can also be associated with permanent incisors. HSPM affect at least one primary second molar and possibly primary canines. Hypomineralized enamel is characteristic: the enamel prisms are disorganized, less distinct, the interprismatic space is more marked, the mineral density is decreased and the protein content is increased. Currently, etiologies remain unknown but the various studies tend towards a multifactorial model with several systemic, genetic and/or epigenetic factors, acting in a synergistic or additive way. Material and Method: The authors highlight the various factors involved in diagnosing MIH and HSPM. A review of the prevalence (French and worldwide) and etiologies of these pathologies is also provided, to enable practitioners to answer any questions parents may have. Conclusion: The knowledge of these different elements on diagnosis, structure, prevalence and etiologies will allow the orthodontist to better collaborate with the dentist but also with the parents in order to ensure an adequate dental and orthodontic management.

Introduction: L'hypominéralisation molaire incisive (MIH) et l'hypominéralisation des secondes molaires temporaires (HSPM) sont des défauts qualitatifs et asymétriques de l'émail. Les MIH affectent au moins une première molaire permanente et peuvent également être associées aux incisives permanentes. Les HSPM affectent au moins une deuxième molaire temporaire et éventuellement les canines temporaires. L'émail hypominéralisé est caractéristique : les prismes d'émail sont désorganisés, moins distincts, l'espace interprismatique est plus marqué, la densité minérale est diminuée et la teneur en protéines augmentée. Actuellement, les étiologies restent méconnues mais les différentes études tendent vers un modèle multifactoriel avec plusieurs facteurs systémiques, génétiques et/ou épigénétiques, agissant de manière synergique ou additive. Matériel et méthode: Les auteurs mettent en avant les différents éléments permettant le diagnostic des MIH et des HSPM. Un point sur les prévalences (française et mondiale) et sur les étiologies de ces pathologies est également proposé afin de permettre aux praticiens de répondre aux éventuelles interrogations des parents. Conclusion: La connaissance de ces différents éléments sur le diagnostic, la structure, les prévalences et les étiologies permettra à l'orthodontiste une meilleure collaboration avec le chirurgien-dentiste, mais également avec les parents afin d'assurer une prise en charge dentaire et orthodontique adéquate.

Scanning electron microscope analysis to evaluate the effect of pretreatment with ozone and sodium hypochlorite on pits and fissures of primary teeth.

Introduction: The cornerstone of preventative therapy is made up of pit and fissure sealants and fluorides. Resin sealants have been shown to help reduce fissure decay in both primary and permanent teeth. Etching of primary molars is not effective due to prismless enamel, higher organic content, and diversity in fissure shape. Methods of pretreatment of pits and fissures have been hypothesized to promote microporosities in etched enamel and hence sealant adherence. Examining the etching pattern and surface roughness of the enamel surface can be used to gauge these. Objective: This study aimed to evaluate the effect of pretreatment with ozone gas and 5.25% sodium hypochlorite solution on pits and fissures of primary teeth to check for the etching pattern and surface roughness. Materials and Methods: Thirty noncarious primary molars were sectioned to retain the crowns, and randomly divided into three groups, sodium hypochlorite, ozone gas, and control. Each sample was pretreated with the agent, washed, followed by etching with 37% phosphoric acid. Samples were sectioned and subjected to scanning electron microscope analysis to evaluate the etching pattern and surface roughness. Results: Comparison of the etching pattern in three groups showed a statistically insignificant difference (P=0.364). Surface roughness was highest in the hypochlorite group followed by ozone and control which showed a statistically significant difference (P = 0.001). The surface area between the three groups showed a statistically insignificant difference. Conclusion: Sodium hypochlorite is a better pretreatment agent compared to ozone gas and acid etching alone. However, as all results were not statistically significant further research must be carried out to prove the effectiveness of these agents.