Assessment of sealing efficacy, radiopacity, and surface topography of a bioinspired polymer for perforation repair.

Background: Root perforation repair presents a significant challenge in dentistry due to inherent limitations of existing materials. This study explored the potential of a novel polydopamine-based composite as a root repair material by evaluating its sealing efficacy, radiopacity, and surface topography. Methods: Confocal microscopy assessed sealing ability, comparing the polydopamine-based composite to the gold standard, mineral trioxide aggregate (MTA). Radiopacity was evaluated using the aluminium step wedge technique conforming to ISO standards. Surface roughness analysis utilized atomic force microscopy (AFM), while field emission scanning electron microscopy (FESEM) visualized morphology. Results: The polydopamine-based composite exhibited significantly superior sealing efficacy compared to MTA (P < 0.001). Radiopacity reached 3 mm aluminium equivalent, exceeding minimum clinical requirements. AFM analysis revealed a smooth surface topography, and FESEM confirmed successful composite synthesis. Conclusion: This study demonstrates promising properties of the polydopamine-based composite for root perforation repair, including superior sealing efficacy, clinically relevant radiopacity, and smooth surface topography. Further investigation is warranted to assess its clinical viability and potential translation to endodontic practice.

Graphene oxide-encapsulated baghdadite nanocomposite improved physical, mechanical, and biological properties of a vancomycin-loaded PMMA bone cement.

Polymethyl methacrylate (PMMA) bone cement is commonly used in orthopedic surgeries to fill the bone defects or fix the prostheses. These cements are usually containing amounts of a nonbioactive radiopacifying agent such as barium sulfate and zirconium dioxide, which does not have a good interface compatibility with PMMA, and the clumps formed from these materials can scratch metal counterfaces. In this work, graphene oxide encapsulated baghdadite (GOBgh) nanoparticles were applied as radiopacifying and bioactive agent in a PMMA bone cement containing 2 wt.% of vancomycin (VAN). The addition of 20 wt.% of GOBgh (GOBgh20) nanoparticles to PMMA powder caused a 33.6% increase in compressive strength and a 70.9% increase in elastic modulus compared to the Simplex® P bone cement, and also enhanced the setting properties, radiopacity, antibacterial activity, and the apatite formation in simulated body fluid. In vitro cell assessments confirmed the increase in adhesion and proliferation of MG-63 cells as well as the osteogenic differentiation of human adipose-derived mesenchymal stem cells on the surface of PMMA-GOBgh20 cement. The chorioallantoic membrane assay revealed the excellent angiogenesis activity of nanocomposite cement samples. In vivo experiments on a rat model also demonstrated the mineralization and bone integration of PMMA-GOBgh20 cement within four weeks. Based on the promising results obtained, PMMA-GOBgh20 bone cement is suggested as an optimal sample for use in orthopedic surgeries.

Radiopacity Enhancements in Polymeric Implant Biomaterials: A Comprehensive Literature Review.

Polymers as biomaterials possess favorable properties, which include corrosion resistance, light weight, biocompatibility, ease of processing, low cost, and an ability to be easily tailored to meet specific applications. However, their inherent low X-ray attenuation, resulting from the low atomic numbers of their constituent elements, i.e., hydrogen (1), carbon (6), nitrogen (7), and oxygen (8), makes them difficult to visualize radiographically. Imparting radiopacity to radiolucent polymeric implants is necessary to enable noninvasive evaluation of implantable medical devices using conventional imaging methods. Numerous studies have undertaken this by blending various polymers with contrast agents consisting of heavy elements. The selection of an appropriate contrast agent is important, primarily to ensure that it does not cause detrimental effects to the relevant mechanical and physical properties of the polymer depending upon the intended application. Furthermore, its biocompatibility with adjacent tissues and its excretion from the body require thorough evaluation. We aimed to summarize the current knowledge on contrast agents incorporated into synthetic polymers in the context of implantable medical devices. While a single review was found that discussed radiopacity in polymeric biomaterials, the publication is outdated and does not address contemporary polymers employed in implant applications. Our review provides an up-to-date overview of contrast agents incorporated into synthetic medical polymers, encompassing both temporary and permanent implants. We expect that our results will significantly inform and guide the strategic selection of contrast agents, considering the specific requirements of implantable polymeric medical devices.

Contribution of micropores in porous zirconia spheres to high optical transparency of dental resin composites.

Transparency to UV-Vis light and radiopacity of dental resin composites containing zirconia (ZrO2) fillers were investigated. The transparency of the resin composite containing porous ZrO2 spheres was much higher than that containing irregularly shaped ZrO2 particles. Calcination of the porous ZrO2 spheres at high temperatures led to dramatically reduced specific surface areas and pore volumes. The transparency of the resin composite containing the calcined porous ZrO2 spheres drastically decreased as the calcination temperature increased. Then, the enhanced UV-Vis transmittance of the resin composite containing porous ZrO2 spheres is attributed to the concentration and physical characteristics of the pores. The radiopacity of the resin composites containing porous ZrO2 spheres increased slightly with increasing calcination temperature. This study revealed that the internal structure of the ZrO2 fillers mainly influenced in the UV-Vis light transmittance of the resin composites.

The radiopacity of single-shade composite resins: A comparative evaluation.

OBJECTIVE: The aim of this study was to evaluate the radiopacity of single-shade composite resins with group and multi-shade composite resins via a digital image analysis. MATERIALS AND METHODS: Disc-shaped (5 mm in diameter, 2 mm in thickness) specimens were prepared with one multi-shade (Estelite Sigma Quick-ESQ), four single-shade (Omnichroma-OC, Charisma Topaz One-CTO, Vitra Unique-VU, and ZenChroma-ZC), three group-shade (G-aenial Achord-GA, Optishade-OS, and Estelite Asteria-EA), and one posterior composite resin (Estelite Posterior-EP) (n = 3). A radiographic image of all the specimens, an aluminum step-wedge, and a 2 mm thick tooth section were taken. Mean gray values (MGV) of the specimens, enamel, and dentin were calculated by ImageJ software. Composition analysis was performed with EDS, and SEM images (×10,000) were obtained. The data were analyzed with Kruskal-Wallis and Post hoc adjusted Bonferroni analysis (p = 0.05). RESULTS: The mean MGV of CTO, the highest of all test groups, was significantly higher than OC and dentin (p = 0.04 and p = 0.009, relatively). The lowest mean MGV was also observed in a single-shade group, OC. EDS analysis showed that the tested materials comprised various radiopaque elements. CONCLUSIONS: All of the single-shade and group-shade groups exceeded the MGV value of dentin, which is clinically expected from any restorative material. CLINICAL SIGNIFICANCE: The radiopacity properties of various single-shade composite resins which as a category is a rising trend in esthetic dentistry were investigated. It is important for clinicians to be aware of novel materials' physical qualities including radiopacity, a daily clinical criteria for restorative materials.

The radiographic evaluation of 11 different resin composites.

Radiopacities of dental materials used in restorations are very important in making the radiographic diagnosis. Therefore, the aim of our study was to evaluate the radiopacity of five single-shade and six simplishade resin composites with digital technique. Five different single-shade (Charisma Topaz One, Omnichroma, Clearfil Majesty ES-2 Universal, Vittra APS Unique, ZenChroma) and six different simplishade resin composites (G-aenial A'CHORD, Essentia Universal, OptiShade, Estelite Asteria, Filtek Universal, Filtek Z250) were used. For each group, five disk-shaped resin composites of 1 mm and 2 mm thicknesses were prepared. As a control, tooth slices with 1 mm and 2 mm thicknesses and a 99.5% pure aluminum step-wedge were used. The samples, tooth slices, and a step-wedge were placed on a photostimulable phosphor plate. Digital radiographs were taken from 30 and 40 cm distances (70 kVp, 7 mA 0.28 ms). The images were analyzed using ImageJ software to measure the mean gray values. Data were analyzed using SPSS 22 package program and Kruskal-Wallis H Test (p < 0.05). The highest radiopacity was seen in Filtek Universal at both distances and thicknesses. Omnichroma had the lowest radiopacity in all parameters. All specimens showed higher radiopacity than dentin. Except for Omnichroma 1 and 2 mm thick, Clearfil Majesty ES-2 Universal 2 mm thick, samples showed higher radiopacities than enamel (p < 0.05). The restorative materials tested were found to be more radiopaque than dentin. The samples passed the International Organization for Standardization for radiopacity values. The radiopacity values were affected by thickness and type of materials.

Endodontic Radiopacifying Application of Barium Titanate Prepared through a Combination of Mechanical Milling and Heat Treatment.

Mineral trioxide aggregates (MTA) are commonly used as endodontic filling materials but suffer from a long setting time and tooth discoloration. In the present study, the feasibility of using barium titanate (BTO) for discoloration and a calcium chloride (CaCl2) solution to shorten the setting time was investigated. BTO powder was prepared using high-energy ball milling for 3 h, followed by sintering at 700-1300 °C for 2 h. X-ray diffraction was used to examine the crystallinity and crystalline size of the as-milled and heat-treated powders. MTA-like cements were then prepared using 20-40 wt.% BTO as a radiopacifier and solidified using a 0-30% CaCl2 solution. The corresponding radiopacity, diametral tensile strength (DTS), initial and final setting times, and discoloration performance were examined. The experimental results showed that for the BTO powder prepared using a combination of mechanical milling and heat treatment, the crystallinity and crystalline size increased with the increasing sintering temperature. The BTO sintered at 1300 °C (i.e., BTO-13) exhibited the best radiopacity and DTS. The MTA-like cement supplemented with 30% BTO-13 and solidified with a 10% CaCl2 solution exhibited a radiopacity of 3.68 ± 0.24 mmAl and a DTS of 2.54 ± 0.28 MPa, respectively. In the accelerated discoloration examination using UV irradiation, the color difference was less than 1.6 and significantly lower than the clinically perceptible level (3.7). This novel MTA exhibiting a superior color stability, shortened setting time, and excellent biocompatibility has potential for use in endodontic applications.

Radiopacity of Sodium Zirconium Cyclosilicate in Computed Tomography: a case of a patient with Hyperkalemia and kidney disease.

Sodium Zirconium Cyclosilicate (SZC) is commonly used for treating hyperkalemia because it sequesters gastrointestinal potassium ions, thereby reducing serum potassium levels. However, a less-discussed aspect of SZC is its radiopacity on x-ray-based imaging techniques. The European Medicines Agency (EMA) has only vaguely addressed this issue. Radiopaque substances like SZC can interfere with diagnostic imaging, creating challenges for clinicians and radiologists. We present the case of a 34-year-old Italian male to illustrate these concerns.

Multifunctionality of Iodinated Halogen-Bonded Polymer: Biodegradability, Radiopacity, Elasticity, Ductility, and Self-Healing Ability.

A polymer with high contents of ester bonds and iodine atoms was synthesized, exhibiting sufficient biodegradability and radioactivity for biomedical applications. The iodine moieties of the synthesized polyester can generate halogen bonding between molecules, which may develop additional functional properties through the bonding. In this study, poly(glycerol adipate) (PGA) was selected and synthesized as a polyester, which was then adequately conjugated with three different types of iodine compounds via the hydroxy groups of PGA. It was found that the iodine compounds could effectively work as donors of halogen bonding. The thermal analysis by differential scanning calorimetry (DSC) revealed that the glass transition temperature increased with the increase in the strength of interactions caused by π-π stacking and halogen bonding, eventually reaching 49.6 °C for PGA with triiodobenzoic groups. An elastomeric PGA with monoiodobenzoic groups was also obtained, exhibiting a high self-healing ability at room temperature because of the reconstruction of halogen bonding. Such multifaceted performance of the synthesized polyester with controllable thermal/mechanical properties was realized by halogen bonding, leading to a promising biomaterial with multifunctionality.

Chemomechanical Properties and Biocompatibility of Various Premixed Putty-type Bioactive Ceramic Cements.

INTRODUCTION: This study aimed to evaluate the chemomechanical properties and biocompatibility of recently introduced premixed putty-type bioactive ceramic cements (PPBCs). METHODS: Including ProRoot MTA (PMTA) as a control, BC RRM fast-set putty (BCPT), Well-Root PT (WRPT), One-Fil PT (OFPT), and Endocem MTA premixed (ECPM) were compared to evaluate setting time, radiopacity, pH change, and microhardness. Biocompatibility on human dental pulp cells was compared using CCK-8 assay. Mineralization potential was evaluated using alkaline phosphatase activity, Alizarin Red S (ARS) staining, and quantitative real-time polymerase chain reaction with odontogenic gene marker. For data analysis, 1-way analysis of variance and Tukey's post hoc test were used at the significance level of 95%. RESULTS: Among the PPBCs, BCPT presented the longest (552 ± 27) setting time (minutes) and others showed significantly shorter time than PMTA (334 ± 22) (P < .05). WRPT (6.20 ± 0.54) and OFPT (5.82 ± 0.50) showed significantly higher radiopacity values (mmAl) and others showed similar value compared with PMTA (P > .05). All PPBCs showed high alkaline pH from fresh materials and tended to increase according to time periods from 30 minutes to 12 hours. ECPM showed the highest value of microhardness (81.62 ± 5.90), WRPT showed similar, and others showed lower than PMTA (P < .05). All PPBCs showed biocompatibility in CCK-8 assay. All PPBCs showed similar or better value compared with PMTA in ALP and ARS staining, and ALP and DSPP marker expression (P < .05). CONCLUSIONS: The PPBCs showed clinically acceptable chemomechanical properties and favorable mineralization potential.

Differences in radiopacity among CT contrast agents and concentrations: A quantitative study.

BACKGROUND AND PURPOSE: Several studies in the literature have attempted to subjectively assess the degree of visualization of different neurovascular structures using different contrast agents and concentrations. Given the recent contrast shortages, we aim to objectively compare the radiopacity achieved with four angiographic contrast agents used in clinical practice. METHODS: Isovue 370, Visipaque 320, Omnipaque 300, and Isovue 300 were each drawn up at 25%, 50%, 75%, and 100% concentrations and compared against normal saline and air syringes. CT scans were obtained, and regions of interest were analyzed for radiopacity using Hounsfield unit (HU) measurements. An aneurysm model with different contrast concentrations was also scanned and dimensions compared. Two-tailed t-tests and Cohen's d coefficients were applied to assess for differences in mean HU measurements. RESULTS: Isovue 370 and Isovue 300 had the highest and lowest mean HU, respectively (p < .001). Visipaque 320 at 25% concentration had the lowest mean HU at -.76. Statistically similar agents (p < .05) were Visipaque 320 and Omnipaque 300 at a 100% concentration (p = .30), and Omnipaque 300 and Isovue 300 at a 25% concentration (p = .73). Aneurysm dimensions among Isovue 370, Visipaque 320, and Omnipaque 300 were all similar, whereas with Isovue 300, the dimensions were significantly smaller (p < .05). CONCLUSION: Isovue 370 provides the highest HU radiopacity and the most accurate aneurysm measurements. Angiographic measurements obtained with Isovue 300 may underestimate the actual aneurysmal dimensions. Visipaque 320 and Omnipaque 300 at 100% concentration have similar mean HUs and are beneficial for patients with chronic kidney or cardiac disease.

The solubility, pH value, chemical structure, radiopacity, and cytotoxicity of four different root canal sealers: an in vitro study.

OBJECTIVE: The aim of this study was to investigate solubility, pH value, chemical structure, radiopacity, and cytotoxicity of AH Plus BC, TotalFill BC, AH Plus, and AH Plus Jet sealers. MATERIALS AND METHODS: Cytotoxicity analysis with direct and extraction tests at 3 different concentrations (1:1, 1:2, 1:4 v/v%) and time (24 h, 48 h, and 72 h) on Saos-2, PdLF, and THP-1 cell lines, chemical structure with scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX) analysis, solubility, pH, and radiopacity values of AH Plus BC, TotalFill BC, AH Plus, and AH Plus Jet were evaluated. For statistical analyses of the groups, repeated measures, factorial, and one-way ANOVA tests were used. The statistical significance level was set at p < .05. RESULTS: Resin-based sealers showed higher cytotoxicity values than the bioceramic-based sealers (p < 0.05). Time and concentrations were effective on the cell viabilities for cell lines. Higher peaks of calcium were detected bioceramic-based sealers and higher amount of zirconium was detected in AH Plus BC (p < 0.05). AH Plus BC showed similar radiopacity value with AH Plus, AH Plus Jet, whereas TotalFill BC showed the lowest radiopacity (p < 0.05). Bioceramic-based sealers had higher pH values in all experiment periods, and the difference between resin- and bioceramic-based sealer groups was significant (p < 0.05). However, the solubility values of the tested root canal sealers revealed no differences (p > 0.05). CONCLUSIONS: The newly produced AH Plus BC Sealer showed similar properties with TotalFill BC, and their biological properties were better than AH Plus and AH Plus Jet. CLINICAL RELEVANCE: AH Plus BC could be a possible alternative to other bioceramic- or resin-based sealers.

Radiopacity evaluation of calcium silicate cements.

BACKGROUND: The aim of this study was to compare the radiopacity of calcium silicate cements using a digital imaging method. METHODS: Four calcium silicate cements, NeoMTA 2, OrthoMTA, ProRoot MTA, and Biodentine, were used in this study. Disk-shaped samples were prepared from each material and placed on a plexiglass plate. An aluminum step-wedge was placed alongside the samples on a digital sensor and exposed to 70 kVp and 8 mA from 30 cm away for 0.32 s. The greyness values ​​of the tested materials were measured digitally with the system software and compared with those of the step-wedge to determine the equivalent aluminum thickness. RESULTS: The radiopacity values, expressed in equivalent millimetres of aluminum, of the studied materials ProRoot MTA, OrthoMTA, NeoMTA 2, and Biodentine were 4.32 ± 0.17 mm Al, 3.92 ± 0.09 mm Al, 3.83 ± 0.07 mm Al, and 2.29 ± 0.21 mm Al, respectively. Statistically significant differences were found between the mean radiographic density values of the tested materials (p < 0.05). CONCLUSION: ProRoot MTA was the most radiopaque root canal filling material among the tested materials. All materials, except Biodentine, were found to be compliant with the minimum radiopacity requirements of ISO 6876 and ADA 57 standards.

Synthesis and characterization of non-invasively traceable poly(ether urethane)s for biomedical applications.

The ease of real-time visibility of biomedical implants and minimally invasive medical devices is indispensable in radiological imaging to avoid complications and assess therapeutic success. Herein, we prepared a series of polyurethane elastomers with inherent radiopacity, enabling them to be imaged under fluoroscopy. Through an appropriate selection of less toxic intermediates such as 1,6-Diisocyanatohexane (HDI), poly (tetramethylene glycol) (PTMG), and a chain extender, iodinated hydroquinone bis(2-hydroxyethyl) ether (IBHE), new radiopaque polyether urethanes (RPUs) containing about 10.8 to 20.6% iodine contents were synthesized. RPUs were characterized for the physicochemical, thermomechanical and radiopacifying properties. It was observed that the concentration of IBHE had a profound impact on the radiopacity of polyurethanes. RPUs exhibited similar or better radiopacity than an aluminum wedge of equivalent thickness.In-vivoimaging revealed that the RPUs were easily distinguishable from the surrounding tissues. Irrespective of iodine content, all the RPUs were cytocompatible, indicating the suitability of these materials for medical and allied applications.

Radiopacity evaluation of different types of resin restorative materials using a digital radiography system.

OBJECTIVES: The aim of the study was to evaluate and compare the radiopacity of 20 current dental resin composites with digital radiography. METHODS: Ten specimens, 10-mm in diameter and 1-mm thickness, were prepared and radiographed using phosphor plates close to Al step wedges and tooth sections. The mean grey values (MGVs) were measured using an ImageJ software program and converted to equivalent Al thickness. Data were analyzed using one-way analysis of variance (ANOVA) and Tamhane post hoc test (p < 0.05). Correlation between mean radiopacity and filler content (wt% and vol%) of the tested materials was analyzed with linear regression analysis. RESULTS: The radiopacity of all composites ranged from 1.32 mm Al (Estellite Flow Quick) to 3.41 mm Al (Charisma Classic). All the tested materials, except four restorative materials, had a radiopacity equal or higher than the enamel (p < 0.05). Linear regression revealed low correlation between the radiopacity and filler content of the composite. CONCLUSION: Majority of the materials has appropriate radiopacity for dental restorations. There was great variation in radiopacity level, may clinically affect the diagnosis.

Incorporating Tantalum Oxide Nanoparticles into Implantable Polymeric Biomedical Devices for Radiological Monitoring.

Longitudinal radiological monitoring of biomedical devices is increasingly important, driven by the risk of device failure following implantation. Polymeric devices are poorly visualized with clinical imaging, hampering efforts to use diagnostic imaging to predict failure and enable intervention. Introducing nanoparticle contrast agents into polymers is a potential method for creating radiopaque materials that can be monitored via computed tomography. However, the properties of composites may be altered with nanoparticle addition, jeopardizing device functionality. Thus, the material and biomechanical responses of model nanoparticle-doped biomedical devices (phantoms), created from 0-40 wt% tantalum oxide (TaOx ) nanoparticles in polycaprolactone and poly(lactide-co-glycolide) 85:15 and 50:50, representing non, slow, and fast degrading systems, respectively, are investigated. Phantoms degrade over 20 weeks in vitro in simulated physiological environments: healthy tissue (pH 7.4), inflammation (pH 6.5), and lysosomal conditions (pH 5.5), while radiopacity, structural stability, mechanical strength, and mass loss are monitored. The polymer matrix determines overall degradation kinetics, which increases with lower pH and higher TaOx content. Importantly, all radiopaque phantoms could be monitored for a full 20 weeks. Phantoms implanted in vivo and serially imaged demonstrate similar results. An optimal range of 5-20 wt% TaOx nanoparticles balances radiopacity requirements with implant properties, facilitating next-generation biomedical devices.

Modification of Polyvinyl Chloride Composites for Radiographic Detection of Polyvinyl Chloride Retained Surgical Items.

The ever-present risk of surgical items being retained represents a real medical peril for the patient and potential liability issues for medical staff. Radiofrequency scanning technology is a very good means to substantially reduce such accidents. Radiolucent medical-grade polyvinyl chloride (PVC) used for the production of medical items is filled with radiopaque agents to enable X-ray visibility. The present study proves the suitability of bismuth oxychloride (BiOCl) and documents its advantages over the classical radiopaque agent barium sulfate (BaSO4). An addition of BiOCl exhibits excellent chemical and physical stability (no leaching, thermo-mechanical properties) and good dispersibility within the PVC matrix. As documented, using half the quantity of BiOCl compared to BaSO4 will provide a very good result. The conclusions are based on the methods of rotational rheometry, scanning electron microscopy, dynamic mechanical analysis, atomic absorption spectroscopy, and the verification of zero leaching of BiOCl out of a PVC matrix. X-ray images of the studied materials are presented, and an optimal concentration of BiOCl is evaluated.

Modification and evaluation of diatrizoate sodium containing polymethyl methacrylate bone cement.

Polymethyl methacrylate (PMMA) bone cement is now widely used in percutaneous vertebro plasty (PVP) and percutaneous kyphoplasty (PKP). However, studies showed that the radiopacifiers (zirconia, barium sulfate, etc.) added to PMMA will have a negative impact on its use, e.g. barium sulfate will weaken the mechanical properties of bone cement and lead to bone absorption and aseptic loosening. Iodine is an element existing in the human body and has good imaging performance. Iodine contrast agent has been used in clinic for many years and has abundant clinical data. Therefore, using iodine instead of barium sulfate may be a promising choice. In this paper, the effect of different content of diatrizoate sodium (DTA, C11H8I3N2NaO4) on the properties of PMMA was studied and compared with the traditional PMMA bone cement containing 30 wt% barium sulfate. The mechanical properties, setting properties, radiopacity, and biocompatibility of bone cement were evaluated. The compressive strength of PMMA bone cement with 20 wt% DTA can reach 76.38 MPa. DTA released from bone cement up to 14 days accounted for only 2.3% of its dosage. The water contact angle was 62.3°. The contrast of bone cement on X-ray film was comparable to that of bone cement containing 30 wt% barium. The hemolysis rate was lower than 4%, and there was no obvious hemolysis. PMMA with 20 wt% DTA can maintain the relative growth rate of MC3T3-E1 and L929 cells above 80%. The results show that adding 20 wt% DTA into PMMA can obtain good radiopacity while maintaining its mechanical properties, setting properties, and biocompatibility. DTA can be used as a promising candidate material for PMMA bone cement radiopacifier.

Theoretical method for a radiopacifier proportion calculation in MTA type cements.

This article deals with the problem of determining the proportion by weight of radiopacifying material needed to add to a cement clinker of mineral trioxide aggregated (CE) to comply with ISO 6876/2001 and ANSI-ADA 57 regulations for radiopacity. With this aim, CE was synthesized and mixed experimentally with 5, 10, 15, and 20 wt% of ZrO2 as radiopacifying material. Radiographic images were taken so that radiographic density was obtained and related to the mmAl scale by using an aluminum step wedge. From a theoretical point of view, absorbed intensity given by the Lambert-Beer law was calculated using mass attenuation coefficients (NIST database) for each chemical element included in each component of the cement samples. In this way, we predicted that by adding above 10 wt% of ZrO2 to the CE, the requirements stipulated by ISO 6876 for radiopacity were satisfied with discrepancies around 1 mmAl. This theoretical method gives an excellent approximation to determine the amount of radiopacifying material needed to meet the requirements stipulated by ISO.

Cell viability and physicochemical effects of different concentrations of bismuth trioxide in a mineral trioxide aggregate cement.

PURPOSE: To evaluate the effect of three concentrations of bismuth trioxide (Bi2O3) on the biological and physicochemical properties of an experimental mineral trioxide aggregate-type (MTA-type) cement at different time points. METHODS: Three experimental groups with white Portland cement containing 15, 20, or 25 wt% of Bi2O3 were assessed. Cellular proliferation in human periodontal ligament fibroblasts was evaluated with an MTT assay. Radiopacity, dimensional stability, pH, and compressive strength were evaluated at different time points. RESULTS: Bismuth trioxide induced cell proliferation in the Bi15 and Bi25 groups in a time-dependent manner; pH was similar in all groups. Compressive strength was associated with time and bismuth concentration. Bi25 had significantly contracted at day 7 and expanded at day 14 (ANOVA P < 0.05, post hoc Tukey test P < 0.05). CONCLUSION: A higher Bi2O3 concentration had a negative effect on the physical properties of the cement at all time points.