Microwave-Assisted vs. Conventional Extraction of Moringa oleifera Seed Oil: Process Optimization and Efficiency Comparison.

This study aims to evaluate the effectiveness of microwave-assisted and conventional extraction using ethanol, hexane, and petroleum ether as solvents, and to optimize the process for extracting oil from Moringa oleifera Lam. seeds, with a focus on improving food-grade oil production. Response surface methodology (RSM) was applied to enhance the extraction process of the oil. Central composite rotational design (CCRD) was used to analyze the impact of solid-liquid ratio (x1), power (x2), and temperature (x3) on oil yield. The optimization identified the optimal conditions as a solid/liquid ratio of 1:38, power of 175 W, and temperature of 50 °C, achieving a 42% oil yield. Notably, the microwave-assisted extraction reduced the processing time from 8 h (using conventional Soxhlet extraction) to just 1 h. Conventional extraction with hexane and petroleum ether was also performed for comparison, resulting in similar oil content and fatty acid profiles, predominantly, oleic acid. FTIR analysis confirmed that the microwave-extracted oil contained fatty acids and had similar characteristics to the conventionally extracted oil. Thus, the use of ethanol as a green solvent in the microwave has shown significant improvement in terms of time and energy savings compared to the Soxhlet method with toxic solvents. This study concludes that microwave-assisted extraction with ethanol provides a more energy efficient, environmentally friendly, and time-saving alternative for food-grade oil production, aligning with advancements in food engineering and production.

Multi-walled carbon nanotubes functionalized with a new Schiff base containing phenylboronic acid residues: application to the development of a bienzymatic glucose biosensor using a response surface methodology approach.

An innovative supramolecular architecture is reported for bienzymatic glucose biosensing based on the use of a nanohybrid made of multi-walled carbon nanotubes (MWCNTs) non-covalently functionalized with a Schiff base modified with two phenylboronic acid residues (SB-dBA) as platform for the site-specific immobilization of the glycoproteins glucose oxidase (GOx) and horseradish peroxidase (HRP). The analytical signal was obtained from amperometric experiments at - 0.050 V in the presence of 5.0 × 10-4 M hydroquinone as redox mediator. The concentration of GOx and HRP and the interaction time between the enzymes and the nanohybrid MWCNT-SB-dBA deposited at glassy carbon electrodes (GCEs) were optimized through a central composite design (CCD)/response surface methodology (RSM). The optimal concentrations of GOx and HRP were 3.0 mg mL-1 and 1.50 mg mL-1, respectively, while the optimum interaction time was 3.0 min. The bienzymatic biosensor presented a sensitivity of (24 ± 2) × 102 µA dL mg-1 ((44 ± 4) × 102 µA M-1), a linear range between 0.06 mg dL-1 and 21.6 mg dL-1 (3.1 µM-1.2 mM) (R2 = 0.9991), and detection and quantification limits of 0.02 mg dL-1 (1.0 µM) and 0.06 mg dL-1 (3.1 µM), respectively. The reproducibility for five sensors prepared with the same MWCNT-SB-dBA nanohybrid was 6.3%, while the reproducibility for sensors prepared with five different nanohybrids and five electrodes each was 7.9%. The GCE/MWCNT-SB-dBA/GOx-HRP was successfully used for the quantification of glucose in artificial human urine and commercial human serum samples.

Development of antimicrobial starch-based composite films reinforced with soybean expeller for sustainable active packaging applications.

In this study, the influence of glycerol and sonicated soybean expeller (SSE) on composite edible films supporting natamycin and nisin was investigated using Response Surface Methodology. Assessments were conducted on mechanical properties, moisture content, water solubility (SW), and color. Optimal results were achieved with 0.46% SSE and 1.4% glycerol, yielding a maximum tensile strength (TS) of 1.0 ± 0.1 MPa and a minimum SW of 19.0 ± 0.3%. SSE had no impact on Tg values (82-89 °C), while antimicrobials reduced Tg (70-73 °C) due to increased water retention. Water vapor permeability was (2.5 ± 0.2) × 10-9  -1 s-1 Pa-1. FTIR analysis revealed strong component interactions. The composite films demonstrated biodegradability in compost after seven days and effective action against Listeria innocua and Saccharomyces cerevisiae. These findings suggest that these materials hold promise as active films for food preservation. Supplementary Information: The online version contains supplementary material available at 10.1007/s10068-023-01516-6.

Impact of adding papain to sous vide cooking on texture and sensorial traits of marinated semitendinosus beefsteaks.

Sous vide meat is an emerging food category, the consumption of which has increased owing to greater convenience, sensory traits, elderly consumers acceptance, and low-cost cuts use. However, required prolonged thermal treatment to achieve desired tenderness, impact energy-consumption besides triggering lipid oxidation, undesired off-flavors, and cooked meat profiles. Using a response surface methodology (RSM), this study evaluated the effects of the vegetal proteolytic papain (0 to 20 mg/kg) and low-temperature sous vide cooking (SVC) time (1 to 8 h at 65°C) in low-value marinated M. semitendinosus beefsteaks on technological characteristics associated with tenderness, and lipid oxidation. Additionally, the sensory profile traits of the pre-selected treatments were described using check-all-that-apply (CATA) and preference mapping. Shear force (WBsSF) was reduced with greater papain addition, whereas higher cooking losses (CL) were observed with longer SVC cooking times. Both the released total collagen and TBARS values increased with increasing papain concentrations and SVC times. Combining high levels of papain (>10 mg/kg) and SVC time (>6 h) resulted in lower WBsSF values (<20 N) but higher CL (>27%) and the CATA descriptors "aftertaste" and "mushy." The optimized conditions (14 mg/kg papain; 2 h SVC) also reduced WBsSF values (<26 N) with lower CL (<20%) and were most preferred and described as "juicy" and "tender" by consumers. Observed results suggest that combined mild SVC and papain may potentiate tenderness, conjointly favor juiciness and oxidation, further representing a promising tool for reducing SVC time without compromising valued sous vide sensory traits.

Effects of the spray-drying process using maltodextrin on bioactive compounds and antioxidant activity of the pulp of the tropical fruit açai (Euterpe oleracea Mart.).

AÒ«ai fruit is characterized by the properties of its bioactive compounds; however, this fruit is highly perishable and its compounds are sensitive when exposed to non-optimal environmental factors. Therefore, the objective of this study was to encapsulate the fruit pulp by spray drying to improve the nutritional value and extend the shelf life of the products derived from acai fruit. Maltodextrin was used as a wall material and the process was optimized to obtain the desirable values of the response variables. For this, a central compound design (CCD) was developed to determine the influence of temperature (110-170 °C) and the wall material proportion (5-15 %) on dependent variables: the retention of ascorbic acid, moisture percentage, hygroscopicity, solubility, water activity, and yield. Furthermore, the effects of spray drying on bioactive compounds (AA, TPC, TFC, TA, TCC, GA, CT, and QC) and antioxidant activity (ABTS, DPPH, and ORAC) were evaluated. The maximum design temperature (170 °C) and wall material proportion (15 %) significantly influenced the response variables where encapsulation was applied, with high ascorbic acid retention (96.886 %), low moisture (0.303 %), low hygroscopicity (7.279 g/100 g), low level of water activity (0.255), a water solubility index of 23.206 %, and a high yield of 70.285 %. The bioactive compounds analyzed and the antioxidant capacity presented significant retention values for AA (96.86 %), TPC (65.13 %), TFC (82.09 %), TA (62.46 %), TCC (7.28 %), GA (35.02 %), CT (49.03 %), QC (37.57 %), ABTS (81.24 %), DPPH (75.11 %), and ORAC (15.68 %). Therefore, it is concluded that the powder obtained under these conditions has desirable physical properties, and the drying process preserved a notable retention of bioactive compounds and their antioxidant activities.

Validation of DOE Factorial/Taguchi/Surface Response Models of Mechanical Properties of Synthetic and Natural Fiber Reinforced Epoxy Matrix Hybrid Material.

A validation of the factorial, Taguchi and response surface methodology (RSM) statistical models is developed for the analysis of mechanical tests of hybrid materials, with an epoxy matrix reinforced with natural Chambira fiber and synthetic fibers of glass, carbon and Kevlar. These materials present variability in their properties, so for the validation of the models a research methodology with a quantitative approach based on the statistical process of the design of experiments (DOE) was adopted; for which the sampling is in relation to the design matrix using 90 treatments with three replicates for each of the study variables. The analysis of the models reveals that the greatest pressure is obtained by considering only the source elements that are significant; this is reflected in the increase in the coefficient of determination and in the predictive capacity. The modified factorial model is best suited for the research, since it has an R2 higher than 90% in almost all the evaluated mechanical properties of the material; with respect to the combined optimization of the variables, the model showed an overall contribution of 99.73% and global desirability of 0.7537. These results highlight the effectiveness of the modified factorial model in the analysis of hybrid materials.

Optimization of Oil and Tocopherol Extraction from Maqui (Aristotelia chilensis (Mol.) Stuntz) by Supercritical CO2 Procedure.

This study focused on the oil extraction from freeze-dried maqui (Aristotelia chilensis) by supercritical fluid extraction with carbon dioxide (SFE-CO2). The basic objective was to optimize the oil yield and the tocopherol concentration. A Box/Behnken experimental design was developed with three processing variables: supercritical pressure (74, 187, and 300 bar), temperature (35, 48, and 60 °C), and extracting time (30, 135, and 240 min). Multiple optimizations, based on the combination of factor levels at 274 bar, 240 min, and 60 °C, led to the highest oil yield and tocopherol values. The validation of the optimized conditions of maqui oil extraction led to an oil yield of 8% and values of 735, 53, and 97 (mg·kg-1 oil) for α-tocopherol, α-tocotrienol, and γ-tocopherol, respectively. A higher concentration of tocopherol compounds was observed when compared to the employment of the conventional extracting method. The optimized SFE-CO2 method led to an oil extract exhibiting higher Hydrophilic-Oxygen Radical Absorbance Capacity (H-ORAC) assay and total phenol content (22 µmol Trolox equivalents·g-1 oil and 28 mg gallic acid equivalents·g-1 oil) than the oil obtained by the conventional procedure. A practical and accurate oil extraction is proposed for obtaining tocopherol-enriched oil including high concentrations of valuable lipophilic antioxidants.

Microencapsulation of Hibiscus sabdariffa L. extract using porous starch and gum Arabic: Optimized process, characterization, stability, and simulated gastrointestinal conditions.

Hibiscus extract exhibits considerable antioxidant activity and a high anthocyanin content, which suggesting potential health benefits. However, these compounds are highly susceptible to environmental factors. The aim of this study was to establish the optimal conditions for the encapsulation of Hibiscus sabdariffa extract (HSE) using mixed porous maize starch-gum Arabic to enhance the stability of bioactive compounds under accelerated aging conditions. Response surface methodology (RSM) was used to optimize microencapsulation conditions through spray drying. The optimal conditions for microencapsulation of HSE by RSM were determined to be 126 °C at the inlet temperature (IT) and 8.5 % at the total solid content (TSC). Using these conditions, the amount of bioactive compounds in optimized microcapsules (OMs) was 2368 mg GAE/100 g, 694 mg QE/100 g, and 930 mg EC3G/100 g, of phenolic compounds, flavonoids, and anthocyanin, respectively. The release rate of anthocyanins during in vitro digestion was more effectively regulated in the OM sample, which retained up to 40 % of anthocyanins compared with 10 % in the HSE. The experimental values in this study exhibit high assertiveness, which renders the optimization model technologically and financially viable for the encapsulation of bioactive compounds with potential use in the food and pharmaceutical industries.

Assessing the reinforcement effect by response surface methodology of holocellulose from spent coffee grounds on biopolymeric films as food packaging materials.

The pollution caused by petroleum-derived plastic materials has become a major environmental problem that has encouraged the development of new compostable and environmentally friendly materials for food packaging based on biomodified polymers with household residues. This study aims to design, synthesize, and characterize a biobased polymeric microstructure film from polyvinyl alcohol and chitosan reinforced with holocellulose from spent coffee grounds for food-sustainable packaging. Chemical isolation with a chlorite-based solution was performed to obtain the reinforced holocellulose from the spent coffee ground, and the solvent casting method was used to obtain the films to study. Physicochemical and microscopic characterizations were conducted to identify and select the best formulations using a simplex-centroid design analysis. The response surface methodology results indicate that the new packaging material obtained with equal amounts of polymers and reinforced material (1:1:1) possesses the appropriate barrier properties and microstructural character to prevent water attack and hydrophobic behavior and thus could be used as an alternative for food packaging materials.

Modeling and optimization of microwave-assisted extraction of total phenolics content from mango (Mangifera indica) peel using response surface methodology (RSM) and artificial neural networks (ANN).

Mango (Mangifera indica) is a fruit highly consumed for its flavor and nutrient content. The mango peel is rich in compounds with biological functionality, such as antioxidant activity among others. The influence of microwave-assisted extraction variables on total phenol compounds (TPC) and antioxidant activity (TEAC) of natural extracts obtained from mango peel var. Tommy and Sugar were studied using a response surface methodology (RSM) and Artificial Neural Networks (ANN). TPC of mango peel extract var. Tommy was significantly influenced by time extraction (X1), solvent/plant ratio (X2) and concentration of ethanol (X3) and while mango peel extract var. Sugar was influenced by X2. TEAC by ABTS was significantly influenced by X3. Maximum of TPC (121.3 mg GAE / g of extract) and TEAC (1185.9 µmol Trolox/g extract) for mango peel extract var. Tommy were obtained at X1=23.9s, X2=12.6mL/gand X3=63.2%, and for mango peel extract var. Sugar, the maximum content of TPC (224.86 mg GAE/g extract) and TEAC (2117.7 µmol Trolox/g extract) were obtained at X1=40s, X2=10mL/g and X3=74.9%. The ANN model presented a higher predictive capacity than the RSM (RANN2>RRSM2,RMSEANN

Extraction of geraniol from palmarosa oil using hydrotropic solvents / Extracción de geraniol del aceite de palmarosa utilizando solventes hidrotrópicos

The extraction of geraniol from palmarosa oil using hydrotropic solvents was investigated. Palmarosa oil possesses an appealing rose aroma and properties like anti - inflammatory, antifungal, and antioxidant due to the presence of geraniol. The extraction of geraniol from palmarosa oil by using distillation methods like steam dis tillation and fractional distillation was a laborious process. So hydrotropes were tried for extraction. The geraniol yield and purity depend on parameters like concentration of hydrotrope, solvent volume ratio, and time period. Using the Box Benkhem Desig n (BBD), the extraction process was optimized. One of the major advantages of using hydrotropic solvents is that they were classified as green solvents, and recovery of solvents is also possible. To reduce the extraction time probe sonication is carried ou t. Different hydrotropic solvents with probe sonication are done on palmarosa oil by altering various process parameters to study the separation, yield, and purity.

Se investigó la extracción de geraniol del aceite de palmarosa utilizando solventes hidrotrópicos. El aceite de palmarosa posee un atractivo aroma a rosa y propiedades antiinflamatorias, antifúngicas y antioxidantes debido a la pr esencia de geraniol. La extracción de geraniol del aceite de palmarosa mediante métodos de destilación como la destilación por vapor y la destilación fraccionada ha sido un proceso laborioso. Por lo tanto, se probaron los hidrotropos para la extracción. El rendimiento y la pureza del geraniol dependen de parámetros como la concentración del hidrotropo, la relación de volumen del solvente y el período de tiempo. Se optimizó el proceso de extracción usando el diseño Box Benkhem (BBD). Una de las principales v entajas de usar solventes hidrotrópicos es que se clasifican como solventes verdes y también es posible recuperar los solventes. Para reducir el tiempo de extracción, se lleva a cabo una sonda de ultrasonido. Se realizan diferentes solventes hidrotropos co n sonda de ultrasonido en el aceite de palmarosa alterando varios parámetros del proceso para estudiar la separación, el rendimiento y la pureza.

Amidation of arabinoglucuronoxylans to modulate their flow behavior.

Arabinoglucuronoxylans obtained from the exudate of Cercidium praecox (Brea gum) were subjected to an amidation reaction to modulate their flow behavior to obtain a product with similar behavior to gum Arabic. The amidation reaction of the uronic acids present in this exudate was studied using the 1-ethyl-3-(3-dimethylaminopropyl)carbodiimide (EDC) and N-hydroxysuccinimide (NHS) system with the aim of maximizing product yield and minimizing by-product. An analysis of the significant factors involved in the reaction was carried out and a response surface methodology was conducted to optimize the stoichiometry of the reagents used. It was possible to obtain models for predicting the degree of amidation (DA) of arabinoglucuronoxylans and the formation of by-products. The formation of a secondary product derived from the amino acid ß-alanine which has not been reported previously in the reaction with polysaccharides, was described. The flow behavior of an amidated product (DA = 52 %) was determined, showing a pseudoplastic behavior and a decreased Newtonian viscosity (η0 = 36.2 Pa s) at the lowest shear rate range with respect to native product solution (η0 = 115 Pa s). Amidated arabinoglucuronoxylans had a flow behavior more similar to that of gum Arabic.

Prediction of the Physical-Mechanical Properties of Roller-Compacted Concrete Pavements under Different Service and Mix Conditions Based on Cement and Water Content.

Roller-compacted concrete (RCC) for pavements has experienced problems with its physical-mechanical performance over extended periods due to ambient and in situ curing conditions. Accordingly, this study aimed to present multiple regression equations for calculating the physical-mechanical properties of RCC for pavements under different service and mix conditions. For this purpose, the research included two cement and two water contents, one reduced with admixture, and four combinations of temperature and relative humidity. For model calibration and definition of the equations, cubic and beam samples were fabricated to carry out physical-mechanical tests, such as moisture content, shrinkage, and modulus of rupture. Laboratory-obtained data were studied with the Response Surface Methodology (RSM) to determine the best regression equations. The main findings determined that the behavior of a mixture of RCC at a prolonged ambient exposure time is possible because the surface models and the RSM were consistent with the different service and mix conditions. The models showed an accuracy of 98.99% in detecting shrinkage changes from 12 to 16% cement with 5.65% water in dry to wet ambient conditions. Similarly, moisture content and modulus of rupture had a 98.27 to 98.88% fit. Finally, the drying shrinkage, with mixes of 12% cement and water content variations with water-reducing admixture and superplasticizer effects, had an adjustment of 94.87%.

Enhancement of oleanolic acid concentration through acid hydrolysis of saponin-rich extracts from Chenopodium berlandieri.

The study investigated Chenopodium berlandieri to analyze its oleanolic acid (OA) content. Response surface methodology with central composite design was used to improve saponin extraction, varying temperature, ethanol, and sample-to-solvent ratio. Best conditions (65 °C, 50% ethanol, 1:10 ratio) yielded 53.45 ± 0.63 mg/g of extract from Huauzontle seeds. Temperature linearly impacted extract yield, while temperature and ethanol influenced total saponin content. Hydrolyzing saponin-rich extracts produced OA-rich extracts. Characterization via HPLC-ELSD and LC-MS identified OA4 as the most concentrated OA saponin (5.54 ± 0.16 mg/g). OA alone reached 2.02 ± 0.12 mg/g. Acid hydrolysis increased OA content by up to 3.27×, highlighting the potential of hydrolyzed Huauzontle extracts as a natural ingredient for various industries due to enhanced OA content.

Optimization by Box-Behnken design for environmental contaminants removal using magnetic nanocomposite.

In this study, a CoO-Fe2O3/SiO2/TiO2 (CIST) nanocomposite was synthesized and utilized as an adsorbent to remove methylene blue (MB), malachite green (MG), and copper (Cu) from aqueous environments. The synthesized nanocomposite was characterized using field emission scanning electron microscopy (FE-SEM), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), and X-ray diffraction (XRD). Input parameters included pH (3-10), contact time (10-30 min), adsorbent amount (0.01-0.03 g), and pollutant concentration (20-60 mg L-1). The effects of these parameters on the removal process efficiency were modeled and optimized using the response surface methodology (RSM) based on the Box-Behnken design (BBD). The RSM-BBD method demonstrated the capability to develop a second-degree polynomial model with high validity (R2 ˃ 0.99) for the removal process. The optimization results using the RSM-BBD method revealed a removal efficiency of 98.01%, 93.06%, and 88.26% for MB, MG, and Cu, respectively, under optimal conditions. These conditions were a pH of 6, contact time of 10 min, adsorbent amount of 0.025 g, and concentration of 20 mg L-1. The synthesized adsorbent was recovered through five consecutive adsorption-desorption cycles using hydrochloric acid. The results showed an approximately 12% reduction from the first to the seventh cycle. Also, MB, MG, and Cu removal from real water samples in optimal conditions was achieved in the range of 81.69-98.18%. This study demonstrates the potential use of CIST nanocomposite as an accessible and reusable option for removing MB, MG, and Cu pollutants from aquatic environments.

Optimization of an Alternative Culture Medium for Phycocyanin Production from Arthrospira platensis under Laboratory Conditions.

Arthrospira platensis, known as spirulina, is a cyanobacterium with multiple nutritional benefits, as it contains substantial amounts of proteins, fatty acids, and pigments. However, the production of this microalga has faced significant challenges, primarily related to the cost and composition of the required culture medium for its optimal growth. This study focused on optimizing two nitrogen sources (urea and potassium nitrate) to maximize the growth of A. platensis and the production of phycocyanin, a photosynthetic pigment of significant commercial value. Optimization was performed using the response surface methodology (RSM) with a central composite design (CCD). Analysis of variance (ANOVA) was employed to validate the model, which revealed that the different concentrations of urea were statistically significant (p < 0.05) for biomass and phycocyanin production. However, potassium nitrate (KNO3) showed no significant influence (p > 0.05) on the response variables. The RSM analysis indicated that the optimal concentrations of KNO3 and urea to maximize the response variables were 3.5 g L-1 and 0.098 g L-1, respectively. This study offers valuable perspectives for the efficient production of A. platensis while reducing production costs for its cultivation on a larger scale.

Red Dragon Fruit Peels: Effect of Two Species Ratio and Particle Size on Fibre Quality and Its Application in Reduced-Fat Alpaca-Based Sausages.

This research aimed to assess the influence of red dragon fruit peels ratio (RDF-PR) from two species, Hylocereus hybridum (HH) and Hylocereus undatus (HU), and particle size (PS) on quality parameters of red dragon fruit peel powder (RDF-PP) and its further application in emulsified alpaca-based sausages as partial substitutes of pork-back fat. A three-level full factorial design (nine treatments) was employed to evaluate the effect of RDF-PR (HH(0%):HU(100%), HH(50%):HU(50%), and HH(100%):HU(0%)) and PS (499-297, 296-177, and <177 µm) on the dependent variables: L*, a*, b*, C, h°, water-holding capacity, oil-holding capacity, swelling capacity, pectin yield, degree of esterification (analysed through FT-IR), and crude fibre content. The data analysed through a response surface methodology showed that treatment one (T1) is the best with the optimised conditions at 100% HU RDF-PR and PS of <177 µm. The statistical validation of T1 exhibited the highest water-holding capacity (32.1 g/g peel), oil-holding capacity (2.20 g oil/g peel), and pectin yield (27.1%). A completely randomised design (four formulations) was then used to assess the effect of partial replacement of pork-back fat by T1 in emulsified alpaca-based sausages on the colourimetric, physicochemical, and texture properties (hardness, chewiness, cohesiveness, springiness, adhesiveness, and adhesive force). Likewise, a sensory hedonic scale was employed to evaluate the appearance, colour, odour, flavour, texture, and overall acceptability of sausages. The results revealed that 65.7% of pork-back fat content was successfully replaced compared with a control formulation. Additionally, F3 showed significantly (p < 0.05) better colourimetric, physicochemical, and textural characteristics, such as lower hardness (34.8 N) and chewiness (21.7 N) and higher redness (a* = 19.3) and C (22.9), compared to a control formulation. This research presents RDF-PP as a promising fat substitute for developing healthier, reduced-fat meat products using fibre-rich agroindustry by-products.

Optimization of enzymatic saccharification of industrial wastes using a thermostable and halotolerant endoglucanase through Box-Behnken experimental design.

This study describes the production, characterization and application of an endoglucanase from Penicillium roqueforti using lignocellulosic agro-industrial wastes as the substrate during solid-state fermentation. The endoglucanase was generated after culturing with different agro-industrial wastes for 96 h without any pretreatment. The highest activity was obtained at 50 °C and pH 4.0. Additionally, the enzyme showed stability in the temperature and pH ranges of 40-80 °C and 4.0-5.0, respectively. The addition of Ca2+, Zn2+, Mg2+, and Cu2+ increased enzymatic activity. Halotolerance as a characteristic of the enzyme was confirmed when its activity increased by 35% on addition of 2 M NaCl. The endoglucanase saccharified sugarcane bagasse, coconut shell, wheat bran, cocoa fruit shell, and cocoa seed husk. The Box-Behnken design was employed to optimize fermentable sugar production by evaluating the following parameters: time, substrate, and enzyme concentration. Under ideal conditions, 253.19 mg/g of fermentable sugars were obtained following the saccharification of wheat bran, which is 41.5 times higher than that obtained without optimizing. This study presents a thermostable, halotolerant endoglucanase that is resistant to metal ions and organic solvents with the potential to be applied in producing fermentable sugars for manufacturing biofuels from agro-industrial wastes.

Optimization of cultural and nutritional conditions to enhance mycelial biomass of Cordyceps militaris using statistical approach.

Cordyceps militaris is a fungus with numerous therapeutic properties that has gained worldwide popularity due to its potential health benefits. The fruiting body of this mushroom is highly expensive and takes a longer time to produce, making mycelial a sustainable and cost-effective alternative. The study investigates and optimizes cultural and nutritional conditions to maximize mycelial biomass. The initial optimization was done by the conventional single-factor approach, followed by Plackett-Burman design to screen the most significant variables, with yeast extract, temperature, and glucose being the most significant, contributing 11.58%, 49.74%, and 27.98%, respectively, in mycelial biomass production. These variables were then optimized using response surface methodology (RSM) based on central composite design (CCD). The study observed that temperature and glucose had the highest impact on mycelial biomass, with p-values of 0.0128 and 0.0191, respectively. Under the optimized conditions, temperature 20 °C, glucose 2.5% (w/v), and yeast extract 0.8% (w/v), the maximal yield of mycelial biomass reached 547 ± 2.09 mg/100 mL, which was 1.95-fold higher than the yield in the basal medium. These findings suggest that optimizing the cultural and nutritional conditions can enhance mycelial biomass production of Cordyceps militaris, offering a sustainable and cost-effective source of this valuable fungus.

Magnetic hydrogel based on xylan, poly (acrylic acid), and maghemite as adsorbent material for methylene blue adsorption: experimental design, kinetic, and isotherm.

A magnetic hydrogel based on xylan (X), poly (acrylic acid), and maghemite (γ-Fe2O3) named HXA-Fe2O3 was synthesized, characterized, and applied as an alternative material to remove methylene blue (MB) from aqueous media by adsorption. Maghemite was synthesized by coprecipitation method and later incorporated in the hydrogel matrix synthesized by free radical polymerization. The characterization studies included FTIR, DSC, XRD, VSM, Zeta Potential, TGA, SEM, TEM, and N2 adsorption isotherms (BET). The physicochemical characterization results confirmed the intended synthesis and showed the compositional, thermal, structural, morphological, textural, and magnetic profile of the materials. The adsorption studies included experimental design, kinetic, and isotherm. A full factorial design was employed considering the factors adsorbent dosage (g L-1), pH, and ionic strength (mmol L-1 of NaCl) for adsorption capacity and removal percentage responses. As ionic strength was not significant, a Doehlert design was employed with adsorbent dosage and pH, indicating the optimal adsorption conditions. The kinetics was well described by the PSO model, while the isotherm obeyed the Sips model. Equilibrium was attained at 60 min, and the maximum experimental adsorption capacity was up to 250.26 mg g-1 at pH 8.5, adsorbent dosage of 0.2 g L-1, and 298 K. These findings show that the magnetic hydrogel produced has great potential to be applied in the adsorption of basic molecules, such as MB.