RESUMEN
The single-unit monomer insertion (SUMI), derived from living/controlled polymerization, can be directly functionalized at the end or within the chain of polymers prepared by living/controlled polymerization, offering potential applications in the preparation of polymers with complex architectures. Many scenarios demand the simultaneous incorporation of monomers suitable for different polymerization methods into complex polymers. Therefore, it becomes imperative to utilize SUMI technologies with diverse mechanisms, especially those that are compatible with each other. Here, we reported the orthogonal SUMI technique, seamlessly combining radical and cationic SUMI approaches. Through the careful optimization of monomer and chain transfer agent pairs and adjustments to reaction conditions, we can efficiently execute both radical and cationic SUMI processes in one pot without mutual interference. The utilization of orthogonal SUMI pairs facilitates the integration of radical and cationic reversible addition-fragmentation chain transfer (RAFT) polymerization in various configurations. This flexibility enables the synthesis of diblock, triblock, and star polymers that incorporate both cationically and radically polymerizable monomers. Moreover, we have successfully implemented a mixing mechanism of free radicals and cations in RAFT step-growth polymerization, resulting in the creation of a side-chain sequence-controlled polymer brushes.
RESUMEN
Polymerization-induced self-assembly (PISA) is a powerful and versatile technique for producing colloidal dispersions of block copolymer particles with desired morphologies. Currently, PISA can be carried out in various media, over a wide range of temperatures, and using different mechanisms. This method enables the production of biodegradable objects and particles with various functionalities and stimuli sensitivity. Consequently, PISA offers a broad spectrum of potential commercial applications. The aim of this review is to provide an overview of the current state of rational synthesis of block copolymer particles with diverse morphologies using various PISA techniques and mechanisms. The discussion begins with an examination of the main thermodynamic, kinetic, and structural aspects of block copolymer micellization, followed by an exploration of the key principles of PISA in the formation of gradient and block copolymers. The review also delves into the main mechanisms of PISA implementation and the principles governing particle morphology. Finally, the potential future developments in PISA are considered.
RESUMEN
Nonconventional luminescent polymers have become research hotspots due to their advantages such as persistent room temperature phosphorescence (p-RTP) emission and strong film-forming properties. It is proven that the molecular weight (MW) of such luminescent polymers has a significant impact on their emission over a large range, generally with a red shift as the MW increases. Herein, four controllable MW polyacrylamides are prepared via reversible addition-fragmentation chain transfer polymerization (RAFT), and their photoluminescence quantum yield and p-RTP lifetimes gradually increase with the increasing MW. The emission of p-RTP gradually shifts blue with increasing MW, which is likely due to the gradually changing interactions between the electron-rich portion in RAFT reagent and the increasing acrylamide (AM) units in the molecular chain. These can be reasonably explained through small angle X-ray scattering, the clustering-triggered emission (CTE) mechanism, and supported by theoretical calculations. Powder with controllable p-RTP capability has the potential for strategic anti-counterfeiting encryption. The above results not only promote the development of the CTE mechanism toward more precise explanations but also provide new ideas for the preparation of nonconventional luminescent polymers with controllable p-RTP emission performance.
Asunto(s)
Resinas Acrílicas , Peso Molecular , Color , Resinas Acrílicas/química , Polimerizacion , Estructura Molecular , Espectrometría Raman , Difracción de Rayos XRESUMEN
Thermo-responsive diblock copolymer, poly(N-isopropylacrylamide)-block-poly(N-vinylisobutyramide) was synthesized via switchable reversible addition-fragmentation chain transfer (RAFT) polymerization and its thermal transition behavior was studied. Poly(N-vinylisobutyramide) (PNVIBA), a structural isomer of poly(N-isopropylacrylamide) (PNIPAM) shows a thermo-response character but with a higher lower critical solution temperature (LCST) than PNIPAM. The chain extension of the PNVIBA block from the PNIPAM block proceeded in a controlled manner with a switchable chain transfer reagent, methyl 2-[methyl(4-pyridinyl)carbamothioylthio]propionate. In an aqueous solution, the diblock copolymer shows a thermo-responsive behavior but with a single LCST close to the LCST of PNVIBA, indicating that the interaction between the PNIPAM segment and the PNVIBA segment leads to cooperative aggregation during the self-assembly induced phase separation of the diblock copolymer in solution. Above the LCST of the PNIPAM block, the polymer chains begin to collapse, forming small aggregates, but further aggregation stumbled due to the PNVIBA segment of the diblock copolymer. However, as the temperature approached the LCST of the PNVIBA block, larger aggregates composed of clusters of small aggregates formed, resulting in an opaque solution.
RESUMEN
The compositional scope of polymer zwitterions has grown significantly in recent years and now offers designer synthetic materials that are broadly applicable across numerous areas, including supracolloidal structures, electronic materials interfaces, and macromolecular therapeutics. Among recent developments in polymer zwitterion syntheses are those that allow insertion of reactive functionality directly into the zwitterionic moiety, yielding new monomer and polymer structures that hold potential for maximizing the impact of zwitterions on the macromolecular materials chemistry field. This manuscript describes the preparation of zwitterionic choline phosphate (CP) methacrylates containing either aromatic or aliphatic thiols embedded directly into the zwitterionic moiety. The polymerization of these functional CP methacrylates by reversible addition-fragmentation chain-transfer methodology yields polymeric zwitterionic thiols containing protected thiol functionality in the zwitterionic units. After polymerization, the protected thiols are liberated to yield thiol-rich polymer zwitterions which serve as precursors to subsequent reactions that produce polymer networks as well as polymer-protein bioconjugates.
Asunto(s)
Polimerizacion , Polímeros , Compuestos de Sulfhidrilo , Compuestos de Sulfhidrilo/química , Polímeros/química , Polímeros/síntesis química , Fosforilcolina/química , Fosforilcolina/análogos & derivados , Estructura Molecular , Metacrilatos/químicaRESUMEN
Sonodynamic therapy is widely used in clinical studies including cancer therapy. The development of sonosensitizers is important for enhancing the generation of reactive oxygen species (ROS) under sonication. Herein, we have developed poly(2-methacryloyloxyethyl phosphorylcholine) (PMPC)-modified TiO2 nanoparticles as new biocompatible sonosensitizers with high colloidal stability under physiological conditions. To fabricate biocompatible sonosensitizers, a grafting-to approach was adopted with phosphonic-acid-functionalized PMPC, which was prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization of 2-methacryloyloxyethyl phosphorylcholine (MPC) using a newly designed water-soluble RAFT agent possessing a phosphonic acid group. The phosphonic acid group can conjugate with the OH groups on the TiO2 nanoparticles. We have clarified that the phosphonic acid end group is more crucial for creating colloidally stable PMPC-modified TiO2 nanoparticles under physiological conditions than carboxylic-acid-functionalized PMPC-modified ones. Furthermore, the enhanced generation of singlet oxygen (1O2), an ROS, in the presence of PMPC-modified TiO2 nanoparticles was confirmed using a 1O2-reactive fluorescent probe. We believe that the PMPC-modified TiO2 nanoparticles prepared herein have potential utility as novel biocompatible sonosensitizers for cancer therapy.
RESUMEN
Nanoporous track-etched membranes (TeM) are promising materials as adsorbents to remove toxic pollutants, but control over the pore diameter and density in addition to precise functionalization of nanochannels is crucial for controlling the surface area and efficiency of TeMs. This study reported the synthesis of functionalized PET TeMs as high-capacity sorbents for the removal of trivalent arsenic, As(III), which is more mobile and about 60 times more toxic than As(V). Nanochannels of PET-TeMs were functionalized by UV-initiated reversible addition fragmentation chain transfer (RAFT)-mediated grafting of 2-(dimethyamino)ethyl methacrylate (DMAEMA), allowing precise control of the degree of grafting and graft lengths within the nanochannels. Ag NPs were then loaded onto PDMAEMA-g-PET to provide a hybrid sorbent for As(III) removal. The As(III) removal efficiency of Ag@PDMAEMA-g-PET, PDMAEMA-g-PET, and pristine PET TeM was compared by adsorption kinetics studies at various pH and sorption times. The adsorption of As(III) by Ag@DMAEMA-g-PET and DMAEMA-g-PET TeMs was found to follow the Freundlich mechanism and a pseudo-second-order kinetic model. After 10 h, As(III) removal efficiencies were 85.6% and 56% for Ag@PDMAEMA-g-PET and PDMAEMA-g-PET, respectively, while PET template had a very low arsenic sorption capacity of 17.5% at optimal pH of 4.0, indicating that both PDMAEMA grafting and Ag-NPs loading significantly increased the As(III) removal capacity of PET-TeMs.
RESUMEN
ß-blockers are a class of medications that are used to treat abnormal heart rhythms and hypertension. Molecularly imprinted polymers (MIPs) capable of selective recognizing and extracting ß-blockers from complex biological samples hold great promise in bioanalytical and biomedical applications, but developing such artificial receptor materials is still challenging. Herein, we introduce a simple one-step method for the synthesis of well-defined molecularly imprinted nanospheres in high yield (83.6-94.4%) via reversible addition-fragmentation chain transfer (RAFT) precipitation polymerization for the selective recognition and extraction of the ß-blockers from human serum. The prepared MIPs are characterized in terms of morphology, pore properties, binding kinetics, capacity, selectivity, and recognition mechanisms. The uniform nanoscale-imprinted layer favored the rapid mass transfer of ß-blockers. The binding studies showed the high adsorption capacity (126.8 µmol/g) and selectivity of the developed nanomaterial. The investigation on the recognition mechanism reveals that multiple driving forces participate in the binding between MIP and ß-blockers, where hydrogen bonding plays as the dominating role for the specific recognition. The MIP was successfully applied for the direct enrichment of five ß-blockers from human serum with HPLC recoveries ranging from 82.9 to 100.3% and RSD of 0.5-6.9% (n = 3).
Asunto(s)
Impresión Molecular , Nanosferas , Adsorción , Humanos , Impresión Molecular/métodos , Polimerizacion , Polímeros/químicaRESUMEN
Determination of microRNAs (miRNAs) as valuable blood-borne biomarkers has attracted many scientific attentions. However, analytical methods are still restricted by miRNAs intrinsic characteristics. In this study, for the first time, novel blackberry-like magnetic DNA/FMMA nanospheres were synthesized and mounted on a gold stir-bar as signal amplification probes. To produce this strong electrochemical signal label, double strand DNAs were immobilized on gold coated magnetic nanospheres through a hybridization chain reaction followed by reversible addition-fragmentation chain-transfer polymerization, which brought a great quantity of the electroactive tags (FMMA) on the nanosphere surface. These nanospheres were then fixed on the gold stir-bar as signal probes. The magnetic DNA/FMMA nanosphere probes can be released by substituting with the newly emerging DNA fragments of catalyzed hairpin assembly products. Eventually, these signal probes were magnetically enriched on the electrode surface to produce electrochemical signal and finally, the biosensor was developed to detect miRNA-106a (model target). The suggested aptamer-based biosensor demonstrated considerable selectivity, acceptable storage stability, high specificity, and excellent performance in real sample analysis without any pretreatments. As a result, current study reveals that the developed strategy has a great potential for the early diagnosis of gastric cancer and additionally the clinical monitoring of any miRNA sequences.
Asunto(s)
Técnicas Biosensibles , Nanopartículas del Metal , MicroARNs , Técnicas Biosensibles/métodos , ADN , Técnicas Electroquímicas/métodos , Oro , Límite de Detección , MicroARNs/genéticaRESUMEN
Light-mediated polymerization techniques offer distinct advantages over polymerization reactions fueled by thermal energy, such as high spatial and temporal control as well as the possibility to work under mild reaction conditions. Reversible addition-fragmentation chain-transfer (RAFT) polymerization is a highly versatile radical polymerization method that can be utilized to control a variety of monomers and produce a vast number of complex macromolecular structures. The use of light to drive a RAFT-polymerization is possible via multiple routes. Besides the use of photo-initiators, or photo-catalysts, the direct activation of the chain transfer agent controlling the RAFT process in a photo-iniferter (PI) process is an elegant way to initiate and control polymerization reactions. Within this review, PI-RAFT polymerization and its advantages over the conventional RAFT process are discussed in detail.
Asunto(s)
Polimerizacion , Catálisis , Estructura MolecularRESUMEN
The influence of alkyl acrylate comonomers in the rank of methyl- (MA), butyl- (BA), ethylhexyl- (EGA), and lauryl- (LA) in ternary copolymers based on acrylonitrile, alkyl acrylate and acrylamide (PAN-alkyl acrylate) on their solutions rheological behavior in dimethyl sulfoxide (DMSO), and mechanical properties of the spun fibers have been investigated. To reveal the role of molecular weight, two series of copolymers with molecular weights of ~50 and 150 kg/mol have been studied. It was shown that the nature of the alkyl acrylate does not significantly affect the rheological behavior of their solutions regardless of the length of the alkyl substituent and the content of the alkyl acrylate in copolymers. An exception is the high-molecular PAN-LA, which is characterized by a non-Newtonian behavior at lower concentrations. Two series of fibers were spun from the characterized ranks of low and high-molecular-weight copolymer solutions. For all copolymers, a 2.5-5-fold increase in the strength and elastic modulus of the fiber was found with an increase in Mw. It has been shown that PAN-MA and PAN-LA fibers have a tensile strength of 800 MPa that is 1.5-3 times higher than that of other copolymers spun in the same conditions.
RESUMEN
Biofilms are a persistent issue in healthcare and industry. Once formed, the eradication of biofilms is challenging as the extracellular polymeric matrix provides protection against harsh environmental conditions and physically enhances resistance to antimicrobials. The fabrication of polymer brush coatings provides a versatile approach to modify the surface to resist the formation of biofilms. Herein, the authors report a facile synthetic route for the preparation of surface-tethered polymeric brushes with antifouling and visible light activated bactericidal properties using surface-initiated photoinduced electron transfer-reversible addition-fragmentation chain transfer polymerization (SI-PET-RAFT). Bactericidal property via the generation of singlet oxygen, which can be temporally and spatially controlled, is investigated against both Gram-positive and Gram-negative bacteria. In addition, the antibacterial properties of the surface can be recycled. This work paves the way for the preparation of polymer films that can resist and kill bacterial biofilms.
Asunto(s)
Antibacterianos , Polímeros , Antibacterianos/farmacología , Bacterias , Bacterias Gramnegativas , Bacterias Grampositivas , Polimerizacion , Polímeros/farmacología , Tomografía de Emisión de Positrones , Propiedades de SuperficieRESUMEN
As a kind of smart material, thermoresponsive hydrogels are widely investigated and applied in many fields. Due to the limitation of the freezing temperature of the water, it is a challenge to further broaden their sol-gel transition temperature (Tgel ) range, especially below 0 °C. Herein, the lower critical solution temperature type of amphiphilic ABA triblock copolymers, synthesized via two-step reversible addition-fragmentation chain transfer (RAFT) polymerization is demonstrated. The hydrophilic A-block and the hydrophobic B-block are composed of poly(N,N-dimethylacrylamide) (PDMAA) and poly(diacetone acrylamide) (PDAAM), respectively. The degree of polymerization (DP) of both A-block and B-block shows a significant influence on the Tgel of triblock copolymer dispersion. By changing the length of these two blocks or physically blending these copolymers dispersions, the Tgel can be well adjusted in a temperature range from 45 to -10 °C. Moreover, When the Tgel is higher than 4 °C, the triblock copolymer coatings show a good anti-fogging property. And when the Tgel is around or lower than the freezing temperature of the water, aqueous dispersions of the triblock copolymer have an ice recrystallization inhibition activity, resulting in the decrease of average maximum grain size (MLGS) of ice crystal.
Asunto(s)
Polímeros , Agua , Cristalización , TemperaturaRESUMEN
Nonionic double thermoresponsive diblock copolymers with both upper critical solution temperature (UCST) and lower critical solution temperature (LCST) phase transitions are synthesized via eco-friendly photoiniferter reversible addition-fragmentation chain transfer polymerization. While the biocompatible random copolymer of di(ethylene glycol) methyl ether methacrylate and oligo(ethylene glycol) methacrylate accounts for the LCST transition, the block of polymethacrylamide from an easily accessible monomer with low health hazard is responsible for the UCST transition. Temperature-dependent dynamic light scattering measurements confirm the formation of micellar aggregates in water at the temperatures below UCST- and above LCST-type cloud points. Additionally, the temperature interval between UCST and LCST, where both blocks are dissolved, can be tailored by varying the comonomer ratio in the random copolymer block. With these unique advantages, the presented work introduces a new polymer system for the design of schizophrenic polymers.
Asunto(s)
Metacrilatos , Polímeros , Micelas , Polimerizacion , TemperaturaRESUMEN
A new photoconjugation approach was developed to prepare nanoparticle-supported boronic acid polymer for effective separation and enrichment of bacteria. The photo-activated polymer immobilization was demonstrated by coupling an azide-modified copolymer of N-isopropylacrylamide and glycidyl methacrylate to a perfluorophenyl azide-modified silica surface. The thermoresponsive polymer was synthesized using reversible addition fragmentation chain transfer polymerization followed by conversion of the pendant epoxides into azide groups. The perfluorophenyl azide-modified silica nanoparticles were synthesized by an amidation reaction between amino-functionalized silica and pentafluorobenzoyl chloride, and a subsequent treatment with sodium azide. Bacteria-capturing boronic acid was conjugated to the silica-supported polymer chains via Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) click reaction. The particle size, morphology and organic content of the composite nanoparticles were characterized systematically. The capability of the nanocomposite to bind Gram-positive and Gram-negative bacteria was investigated. The nanocomposite exhibited high binding capacities for E. coli (13.4â¯×â¯107 CFU/mg) and S. epidermidis (7.66â¯×â¯107 CFU/mg) in phosphate buffered saline. The new photoconjugation strategy enables fast and straightforward grafting of functional polymers on surface, which opens many new opportunities for designing functional materials for bioseparation and biosensing.
Asunto(s)
Nanopartículas , Polímeros , Antibacterianos , Bacterias , Escherichia coli , Bacterias Gramnegativas , Bacterias Grampositivas , Concentración de Iones de Hidrógeno , Dióxido de Silicio , TemperaturaRESUMEN
Composite cryogels containing boronic acid ligands are synthesized for effective separation and isolation of bacteria. The large and interconnected pores in cryogels enable fast binding and release of microbial cells. To control bacterial binding, an alkyne-tagged boronic acid ligand is conjugated to azide-functionalized cryogel via the Cu(I)-catalyzed azide-alkyne cycloaddition reaction. The boronic acid-functionalized cryogel binds Gram-positive and Gram-negative bacteria through reversible boronate ester bonds, which can be controlled by pH and simple monosaccharides. To increase the capacity of affinity separation, a new approach is used to couple the alkyne-tagged phenylboronic acid to cryogel via an intermediate polymer layer that provides multiple immobilization sites. The morphology and chemical composition of the composite cryogel are characterized systematically. The capability of the composite cryogel for the separation of Gram-positive and Gram-negative bacteria is investigated. The binding capacities of the composite cryogel for Escherichia coli and Staphylococcus epidermidis are 2.15 × 109 and 3.36 × 109 cfu/g, respectively. The bacterial binding of the composite cryogel can be controlled by adjusting pH. The results suggest that the composite cryogel may be used as affinity medium for rapid separation and isolation of bacteria from complex samples.
Asunto(s)
Técnicas Bacteriológicas/métodos , Ácidos Borónicos/química , Criogeles/química , Bacterias Gramnegativas/aislamiento & purificación , Bacterias Grampositivas/aislamiento & purificación , Técnicas Bacteriológicas/instrumentación , Bacterias Gramnegativas/química , Bacterias Grampositivas/químicaRESUMEN
Polymeric derivatives of itaconic acid are becoming increasingly more interesting for research and industry because itaconic acid is accessible from renewable resources. In spite of the structural similarity of poly(itaconic acid derivatives) to poly(methacrylates), they are much less reactive, homopolymerize only sluggishly by free radical polymerization (FRP), and are often obtained with low molar masses and conversions. This has so far limited their use. The reasons for the low reactivity of itaconic acid derivatives (including itaconimides, diitaconates, and diitaconamides) are combined steric and electronic effects, as demonstrated by the body of literature on the FRP homopolymerization kinetics of these monomers which is summarized herein. These problems can be solved to a large extent by using controlled radical polymerization (CRP) techniques, notably atom transfer radical polymerization (ATRP) and reversible addition and fragmentation chain transfer radical polymerization (RAFT). By optimizing the reaction conditions for the ATRP and RAFT of itaconic acid derivatives, in particular the reaction temperature, linear relations between molar mass and conversion are obtained in many cases, and homopolymers with high molar masses and reasonably narrow polydispersity indices become accessible. This review presents the state-of-the-art FRP and CRP of itaconic acid derivatives, and highlights functional polymers obtained by these methods.
Asunto(s)
Polímeros , Succinatos , Peso Molecular , PolimerizacionRESUMEN
The development of effective approaches to synthesize smart amphiphilic block copolymers (ABPs) exhibiting acid-responsive degradation through the cleavage of acid-labile imine bonds is extensively explored for controlled release of encapsulated biomolecules, particularly in drug delivery. Here, a new approach based on direct polymerization utilizing a controlled radical polymerization technique to synthesize acid-degradable ABPs bearing pendant imine linkages in hydrophobic block is reported. The approach centers on the synthesis of a novel methacrylate bearing benzoic imine group that can be polymerized to form the hydrophobic imine pendant block. The formed ABPs respond to mild acidic pHs equivalent to tumoral and endosomal/lysosomal acidic environments. This causes the dissociation of self-assembled nanoassemblies through change in their hydrophilic/hydrophobic balance upon the cleavage of pendant imine linkages to the corresponding aldehyde and primary amine, thus leading to the enhanced release of encapsulated drugs. The proof-of-concept results suggest that this robust approach is versatile to further design advanced nanoassemblies responding to dual/multiple stimuli, thus being more effective to intracellular drug delivery.
Asunto(s)
Iminas , Micelas , Interacciones Hidrofóbicas e Hidrofílicas , Polimerizacion , PolímerosRESUMEN
The glycosaminoglycan heparin is a clinically important anticoagulant drug, primarily used to reduce the risk of blood clots (thrombosis) during surgery. Despite its importance in medicine and its continuous use over many decades, heparin suffers from several limitations associated with its heterogeneity and its extraction from animal tissues. In order to address these limitations, reversible addition-fragmentation chain transfer polymerization is utilized to prepare a library of heparin mimetic copolymers from the sulfonated monomers sodium 4-styrene sulfonate, potassium-3-sulfopropyl acrylate, potassium-3-sulfopropyl methacrylate, and sodium-2-acrylamido-2-methyl-1-propane sulfonate. Copolymers are prepared using combinations of two different monomers in various ratios. Monomer reactivity ratios are also determined for some representative monomer combinations, and all polymers are characterized by 1 H NMR spectroscopy and gel permeation chromatography. The anticoagulant activities of the copolymers are determined by activated partial thromboplastin time and thrombin clotting time assays and structure-activity relationships are explored.
Asunto(s)
Anticoagulantes/farmacología , Heparina/química , Polimerizacion , Polímeros/síntesis química , Polímeros/farmacología , Ácidos Sulfónicos/química , Coagulación Sanguínea , Tiempo de Tromboplastina Parcial , Polímeros/química , Trombina/metabolismoRESUMEN
Core cross-linked poly(stearyl methacrylate)-poly(benzyl methacrylate)-poly(ethylene glycol dimethacrylate) [S31-B200-E20] triblock copolymer nanoparticles were synthesized directly in an industrial mineral oil via polymerization-induced self-assembly (PISA). Gel permeation chromatography analysis of the S31-B200 diblock copolymer precursor chains indicated a well-controlled reversible addition-fragmentation chain transfer dispersion polymerization, while transmission electron microscopy, dynamic light-scattering (DLS), and small-angle X-ray scattering studies indicated the formation of well-defined spheres. Moreover, DLS studies performed in THF, which is a common solvent for the S and B blocks, confirmed successful covalent stabilization because well-defined solvent-swollen spheres were obtained under such conditions. Tribology experiments using a mini-traction machine (MTM) indicated that 0.50% w/w dispersions of S31-B200-E20 spheres dramatically reduce the friction coefficient of base oil within the boundary lubrication regime. Given their efficient and straightforward PISA synthesis at high solids, such nanoparticles offer new opportunities for the formulation of next-generation ultralow-viscosity automotive engine oils.