Deciphering the structure of a distinctive trimodular cellulosomal licheninase (RfGH16_21), a family 16 glycoside hydrolase from Ruminococcus flavefaciens by computational and experimental methods.

In order to know the insights of a unique naturally existing trimodular licheninase from GH16 family, sub-family 21 (RfGH16_21) from Ruminococcus flavefaciens, its structure was modeled to understand its functional relations to reveal information regarding modifying the enzyme for improved properties with enhanced catalytic efficiency. Homology modeling revealed three tandem repeats of ß-jelly roll like folds linked by natural linkers. Catalytic pockets and the catalytically important amino acids in each tandem repeat of RfGH16_21 determined by multiple sequence alignment and structure superposition with its homologues indicated that two Glu residues are involved in a retaining-type of catalytic mechanism. Sequential molecular docking revealed maximum binding energy with mixed linked cellotriose showing that cellotriose is the lowest oligomeric hydrolysed product formed by the catalytic action of endo-ß-1,3-1,4-glucanase. Molecular dynamic (MD) simulation of RfGH16_21-cellotriose complex confirmed the structural specificity of catalytic residues and increased stability of enzyme in presence of ligand as compared to simulated RfGH16_21 alone. The binding affinity of cellotriose towards the three tandem repeats of RfGH16_21 was also confirmed by calculating total binding Gibbs free energy, i.e. -100.8 ± 2.6 KJ/mol, by using g_mmpbsa tool. The stability of the protein was determined by protein melting analysis that showed Ca2+ and Mg2+ ions imparted structural stability to RfGH16_21. Dynamic light scattering analysis of RfGH16_21 showed monodispersity and hydrodynamic radius of 4.0 nm at 2.0 mg/mL protein concentration, which was comparable with the radius of gyration of 3.2 nm determined by MD simulation showing the protein to be in monomeric form.Communicated by Ramaswamy H. Sarma.

RfGH16_21 is a licheninase with three tandem repeats of GH16 catalytic moduleThe three tandem repeats of RfGH16_21 module possess ß-jelly roll like foldRfGH16_21 showed highest affinity for cellotriose with free energy -100.8 kJ/molMD simulation of cellotriose bound RfGH16_21 confirmed structural compactnessRfGH16_21 structure stability was increased in the presence of Ca²⁺ and Mg²⁺ ions.

In vitro ruminal fermentation and cow-to-mouse fecal transplantations verify the inter-relationship of microbiome and metabolome biomarkers: potential to promote health in dairy cows.

Introduction: There are differences in the gut microbiome and metabolome when the host undergoes different physical or pathological conditions. However, the inter-relationship of microbiome and metabolome biomarkers to potentially promote the health of dairy cows needs to be studied. Further, the development of next-generation probiotics for dairy cattle health promotion has not been demonstrated. Objective: In the present study, we identified the microbiome and metabolome biomarkers associated with healthy cows. Methods: We analyzed the relationships of the ruminal microorganism profile and metabolites between healthy and mastitis lactating dairy cows. The roles of bacterial biomarker were further verified by in vitro fermentation and cow-to-mouse fecal microbiota transplantation (FMT). Results: Two species, Ruminococcus flavefaciens and Bifidobacterium longum subsp. longum, and six rumen metabolites were positively correlated with healthy cows by Spearman's correlation analysis. Through in vitro ruminal fermentation, inoculating R. flavefaciens and B. longum subsp. longum showed the upregulation of the levels of putrescine, xanthurenic acid, and pyridoxal in the mastitis ruminal fluid, which confirmed the inter-relationships between these microbiota and metabolites associated with healthy cows. Further, we verified the role of R. flavefaciens and B. longum subsp. longum in promoting health by FMT. The administration of R. flavefaciens and B. longum subsp. longum reduced the death rate and recovered the bodyweight loss of germ-free mice caused by FMT mastitis feces. Discussion: We provided evidence that the bacterial biomarkers alter downstream metabolites. This could indirectly indicate that the two bacterial biomarkers have the potential to be used as next-generation probiotics for dairy cattle, although it needs more evidence to support our hypothesis. Two species, R. flavefaciens and B. longum subsp. longum, with three metabolites, putrescine, xanthurenic acid, and pyridoxal, identified in the ruminal fluid, may point to a new health-promoting and disease-preventing approach for dairy cattle.

Multifunctionality and mechanism of processivity of family GH5 endoglucanase, RfGH5_4 from Ruminococcus flavefaciens on lignocellulosic polymers.

Multifunctional endoglucanase, RfGH5_4 from Ruminococcus flavefaciens showed (ß/α)8-TIM barrel structure by homology modeling. Glu168 and Glu292 residues acted as general acid and base during catalysis. Circular Dichroism results, 40.83 % α-helices, 13.84 % ß-strands and 45 % random turns-coils for RfGH5_4 corroborated with predictions by PSIPRED and SOPMA. Molecular Dynamic simulation of RfGH5_4 for 100 ns showed RMSD, 0.71 nm while for RfGH5_4-Cellopentaose complex was 0.55 nm, confirming that the binding of cellulosic ligand stabilizes its structural fold. RfGH5_4 showed strong affinity towards cellulosic ligands having higher degree of polymerization such as cellohexaose (-11.70 kcal/mol) and cellodecaose (-12.64 kcal/mol). Interestingly, complex hemicellulosic ligands such as XLLG of xyloglucan also showed higher affinity (-13.2 kcal/mol) and accommodated at RfGH5_4 active-site. Its catalytic cleft was broad enough to accommodate and hydrolyse various cellulosic and hemicellulosic ligands like XLLG of xyloglucan setting the basis of multifunctionality of RfGH5_4. Loops L2, L3 and L4 having Trp58 formed barrier at active-site of RfGH5_4 were responsible for processivity. RfGH5_4 showed monodispersed state at 2.5 mg/mL and a rattle-toy shape by SAXS. Zeta potential, -16 mV of RfGH5_4 indicated its higher stability. Multifunctional RfGH5_4 endoglucanase could be beneficial for generation lignocellulosic bioethanol and in health, prebiotic and food sector.

Bioconversion of cellulose into bisabolene using Ruminococcus flavefaciens and Rhodosporidium toruloides.

In this study, organic acids were demonstrated as a promising carbon source for bisabolene production by the non-conventional yeast, Rhodosporidium toruloides, at microscale with a maximum titre of 1055 ± 7 mg/L. A 125-fold scale-up of the optimal process, enhanced bisabolene titres 2.5-fold to 2606 mg/L. Implementation of a pH controlled organic acid feeding strategy at this scale lead to a further threefold improvement in bisabolene titre to 7758 mg/L, the highest reported microbial titre. Finally, a proof-of-concept sequential bioreactor approach was investigated. Firstly, the cellulolytic bacterium Ruminococcus flavefaciens was employed to ferment cellulose, yielding 4.2 g/L of organic acids. R. toruloides was subsequently cultivated in the resulting supernatant, producing 318 ± 22 mg/L of bisabolene. This highlights the feasibility of a sequential bioprocess for the bioconversion of cellulose, into biojet fuel candidates. Future work will focus on enhancing organic acid yields and the use of real lignocellulosic feedstocks to further enhance bisabolene production.

A trimodular family 16 glycoside hydrolase from the cellulosome of Ruminococcus flavefaciens displays highly specific licheninase (EC 3.2.1.73) activity.

Cellulosomes are highly complex cell-bound multi-enzymatic nanomachines used by anaerobes to break down plant carbohydrates. The genome sequence of Ruminococcus flavefaciens revealed a remarkably diverse cellulosome composed of more than 200 cellulosomal enzymes. Here we provide a detailed biochemical characterization of a highly elaborate R. flavefaciens cellulosomal enzyme containing an N-terminal dockerin module, which anchors the enzyme into the multi-enzyme complex through binding of cohesins located in non-catalytic cell-bound scaffoldins, and three tandemly repeated family 16 glycoside hydrolase (GH16) catalytic domains. The DNA sequence encoding the three homologous catalytic domains was cloned and hyper-expressed in Escherichia coli BL21 (DE3) cells. SDS-PAGE analysis of purified His6 tag containing RfGH16_21 showed a single soluble protein of molecular size ~89 kDa, which was in agreement with the theoretical size, 89.3 kDa. The enzyme RfGH16_21 exhibited activity over a wide pH range (pH 5.0-8.0) and a broad temperature range (50-70 °C), displaying maximum activity at an optimum pH of 7.0 and optimum temperature of 55 °C. Substrate specificity analysis of RfGH16_21 revealed maximum activity against barley ß-d-glucan (257 U mg-1) followed by lichenan (247 U mg-1), but did not show significant activity towards other tested polysaccharides, suggesting that it is specifically a ß-1,3-1,4-endoglucanase. TLC analysis revealed that RfGH16_21 hydrolyses barley ß-d-glucan to cellotriose, cellotetraose and a higher degree of polymerization of gluco-oligosaccharides indicating an endo-acting catalytic mechanism. This study revealed a fairly high, active and thermostable bacterial endo-glucanase which may find considerable biotechnological potentials.

Molecular Cloning, Expression and Biochemical Characterization of a Family 5 Glycoside Hydrolase First Endo-Mannanase (RfGH5_7) from Ruminococcus flavefaciens FD-1 v3.

The cellulosomal enzyme, RfGH51/2, of Ruminococcus flavefaciens contains an N-terminal module, a family 5 glycoside hydrolase GH5_4 with a putative endoglucanase activity, while C-terminal domain is a putative endo-mannanase (GH5_7). The two putative catalytic modules are separated by family 80 carbohydrate binding module (CBM80) having wide ligand specificity. The putative endo-mannanase module, GH5_7 (RfGH5_7), was cloned, expressed in Escherichia coli BL-21(DE3) cells and purified. SDS-PAGE analysis of purified RfGH5_7 showed molecular size ~ 35 kDa. Substrate specificity analysis of RfGH5_7 showed maximum activity against locust bean galactomannan (298.5 U/mg) followed by konjac glucomannan (256.2 U/mg) and carob galactomannan (177.2 U/mg). RfGH5_7 showed maximum activity at optimum pH 6.0 and temperature 60 °C. RfGH5_7 displayed stability in between pH 6.0 and 9.0 and thermostability till 50 °C. 10 mM Ca2+ ions increased the enzyme activity by 33%. The melting temperature of RfGH5_7 was 84 °C that was not affected by Ca2+ ions or chelating agents. RfGH5_7 showed, Vmax, 389 U/mg and Km, 0.92 mg/mL for locust bean galactomannan. TLC analysis revealed that RfGH5_7 hydrolysed locust bean galactomannan predominantly to mannose, mannobiose, mannotriose and higher degree of polymerization of manno-oligosaccharides indicating an endo-acting catalytic mechanism. This study revealed a highly active and thermostable endo-mannanase with considerable biotechnological potential.

Partial characterization of phylogeny, ecology and function of the fibrolytic bacterium Ruminococcus flavefaciens OS14, newly isolated from the rumen of swamp buffalo.

The fibrolytic rumen bacterium Ruminococcus flavefaciensOS14 was isolated from swamp buffalo and its phylogenetic, ecological and digestive properties were partially characterized. Isolates from rumen contents of four swamp buffalo were screened for fibrolytic bacteria; one of the 40 isolates showed a distinctive feature of solubilizing cellulose powder in liquid culture and was identified as R. flavefaciens based on its 16S ribosomal DNA sequence. This isolate, OS14, was employed for detection and digestion studies, for which a quantitative PCR assay was developed and defined cultures were tested with representative forages in Thailand. OS14 was phylogenetically distant from other isolated and uncultured R. flavefaciens and showed limited distribution among Thai ruminants but was absent in Japanese cattle. OS14 digested rice straw and other tropical forage to a greater extent than the type strain C94 of R. flavefaciens. OS14 produced more lactate than C94, and digested para grass to produce propionate more extensively in co-culture with lactate-utilizing Selenomonas ruminantium S137 than a co-culture of C94 with S137. These results indicate that phylogenetically distinct OS14 could digest Thai local forage more efficiently than the type strain, possibly forming a symbiotic cross-feeding relationship with lactate-utilizing bacteria. This strain might be useful for future animal and other industrial applications.

Effects of dietary supplementation of leaves and whole plant of Andrographis paniculata on rumen fermentation, fatty acid composition and microbiota in goats.

BACKGROUND: The nature and amount of dietary medicinal plants are known to influence rumen fermentation and nutrient digestibility in ruminants. Nonetheless, changes in nutrient digestibility and rumen metabolism in response to dietary Andrographis paniculata (AP) in goats are unknown. This study examined the effects of dietary supplementation of leaves and whole plant of AP on nutrient digestibility, rumen fermentation, fatty acids and rumen microbial population in goats. Twenty-four Boer crossbred bucks (4 months old; average body weight of 20.18 ± 0.19 kg) were randomly assigned to three dietary groups of eight goats each. The dietary treatments included a control diet (Basal diet without additive), basal diet +1.5% (w/w) Andrographis paniculata leaf powder (APL) and basal diet +1.5% (w/w) Andrographis paniculata whole plant powder (APW). The trial lasted 100 d following 14 d of adjustment. RESULTS: The rumen pH and concentration of propionate were greater (P < 0.05) in goats fed the APL and APW diets than those fed the control diet. The concentrations of ammonia nitrogen and acetate were greater (P < 0.05) in the control goats than the APL and APW goats. The digestibilities of crude protein, dry matter, acid detergent fibre and neutral detergent fibre were greater (P < 0.05) in the APL and APW goats compared to the control goats. Dietary APL and APW decreased (P < 0.05) the ruminal concentration of C18:0 and increased (P < 0.05) the ruminal concentration of C18:2n-6 and C18:3n-3. The APL goats had greater (P < 0.05) ruminal concentration of C18:1 trans-11 and CLA cis-9 trans-11 than the APW and control goats. Dietary treatments had no significant effect on the population of protozoa and methanogens in the rumen of goats. The ruminal populations of Ruminococcus albus, Ruminococcus flavefaciens and Fibrobacter succinogenes were greater (P < 0.05) in the APL and APW goats than the control goats. CONCLUSION: Dietary supplementation of leaves and whole plant of Andrographis paniculata can be used to manipulate rumen metabolism for improved nutrient digestibility in goats.

Purification and crystallographic studies of a putative carbohydrate-binding module from the Ruminococcus flavefaciens FD-1 endoglucanase Cel5A.

Ruminant herbivores meet their carbon and energy requirements from a symbiotic relationship with cellulosome-producing anaerobic bacteria that efficiently degrade plant cell-wall polysaccharides. The assembly of carbohydrate-active enzymes (CAZymes) into cellulosomes enhances protein stability and enzyme synergistic interactions. Cellulosomes comprise diverse CAZymes displaying a modular architecture in which a catalytic domain is connected, via linker sequences, to one or more noncatalytic carbohydrate-binding modules (CBMs). CBMs direct the appended catalytic modules to their target substrates, thus facilitating catalysis. The genome of the ruminal cellulolytic bacterium Ruminococcus flavefaciens strain FD-1 contains over 200 modular proteins containing the cellulosomal signature dockerin module. One of these is an endoglucanase Cel5A comprising two family 5 glycoside hydrolase catalytic modules (GH5) flanking an unclassified CBM (termed CBM-Rf2) and a C-terminal dockerin. This novel CBM-Rf2 has been purified and crystallized, and data from cacodylate-derivative crystals were processed to 1.02 and 1.29 Šresolution. The crystals belonged to the orthorhombic space group P212121. The CBM-Rf2 structure was solved by a single-wavelength anomalous dispersion experiment at the As edge.

Expression, purification, crystallization and preliminary X-ray analysis of CttA, a putative cellulose-binding protein from Ruminococcus flavefaciens.

A number of anaerobic microorganisms produce multi-modular, multi-enzyme complexes termed cellulosomes. These extracellular macromolecular nanomachines are designed for the efficient degradation of plant cell-wall carbohydrates to smaller sugars that are subsequently used as a source of carbon and energy. Cellulolytic strains from the rumens of mammals, such as Ruminococcus flavefaciens, have been shown to have one of the most complex cellulosomal systems known. Cellulosome assembly requires the binding of dockerin modules located in cellulosomal enzymes to cohesin modules located in a macromolecular scaffolding protein. Over 220 genes encoding dockerin-containing proteins have been identified in the R. flavefaciens genome. The dockerin-containing enzymes can be incorporated into the primary scaffoldin (ScaA), which in turn can bind to adaptor scaffoldins (ScaB or ScaC) and subsequently to anchoring scaffoldin (ScaE), thereby attaching the whole complex to the cell surface. However, unlike other cellulosomes such as that from Clostridium thermocellum, the Ruminococcus species lack a specific carbohydrate-binding module (CBM) on ScaA which recruits the entire complex onto the surface of the substrate. Instead, a cellulose-binding protein, CttA, comprising two putative tandem novel carbohydrate-binding modules and a C-terminal X-dockerin module, which can bind to the cohesin of ScaE, may mediate the attachment of bacterial cells to cellulose. Here, the expression, purification and crystallization of the carbohydrate-binding modular part of the CttA from R. flavefaciens are described. X-ray data have been collected to resolutions of 3.23 and to 1.61 Å in space groups P3(1)21 or P3(2)21 and P2(1), respectively. The structure was phased using bound iodide from the crystallization buffer by SAD experiments.

Standalone cohesin as a molecular shuttle in cellulosome assembly.

The cellulolytic bacterium Ruminococcus flavefaciens of the herbivore rumen produces an elaborate cellulosome system, anchored to the bacterial cell wall via the covalently bound scaffoldin ScaE. Dockerin-bearing scaffoldins also bind to an autonomous cohesin of unknown function, called cohesin G (CohG). Here, we demonstrate that CohG binds to the scaffoldin-borne dockerin in opposite orientation on a distinct site, relative to that of ScaE. Based on these structural data, we propose that the complexed dockerin is still available to bind ScaE on the cell surface. CohG may thus serve as a molecular shuttle for delivery of scaffoldins to the bacterial cell surface.

Insights into a type III cohesin-dockerin recognition interface from the cellulose-degrading bacterium Ruminococcus flavefaciens.

Cellulosomes are large multicomponent cellulose-degrading assemblies found on the surfaces of cellulolytic microorganisms. Often containing hundreds of components, the self-assembly of cellulosomes is mediated by the ultra-high-affinity cohesin-dockerin interaction, which allows them to adopt the complex architectures necessary for degrading recalcitrant cellulose. Better understanding of how the cellulosome assembles and functions and what kinds of structures it adopts will further effort to develop industrial applications of cellulosome components, including their use in bioenergy production. Ruminococcus flavefaciens is a well-studied anaerobic cellulolytic bacteria found in the intestinal tracts of ruminants and other herbivores. Key to cellulosomal self-assembly in this bacterium is the dockerin ScaADoc, found on the non-catalytic structural subunit scaffoldin ScaA, which is responsible for assembling arrays of cellulose-degrading enzymes. This work expands on previous efforts by conducting a series of binding studies on ScaADoc constructs that contain mutations in their cohesin recognition interface, in order to identify which residues play important roles in binding. Molecular dynamics simulations were employed to gain insight into the structural basis for our findings. A specific residue pair in the first helix of ScaADoc, as well as a glutamate near the C-terminus, was identified to be essential for cohesin binding. By advancing our understanding of the cohesin binding of ScaADoc, this study serves as a foundation for future work to more fully understand the structural basis of cellulosome assembly in R. flavefaciens.

Crystallization and preliminary crystallographic studies of a novel noncatalytic carbohydrate-binding module from the Ruminococcus flavefaciens cellulosome.

Microbial degradation of the plant cell wall is a fundamental biological process with considerable industrial importance. Hydrolysis of recalcitrant polysaccharides is orchestrated by a large repertoire of carbohydrate-active enzymes that display a modular architecture in which a catalytic domain is connected via linker sequences to one or more noncatalytic carbohydrate-binding modules (CBMs). CBMs direct the appended catalytic modules to their target substrates, thus potentiating catalysis. The genome of the most abundant ruminal cellulolytic bacterium, Ruminococcus flavefaciens strain FD-1, provides an opportunity to discover novel cellulosomal proteins involved in plant cell-wall deconstruction. It encodes a modular protein comprising a glycoside hydrolase family 9 catalytic module (GH9) linked to two unclassified tandemly repeated CBMs (termed CBM-Rf6A and CBM-Rf6B) and a C-terminal dockerin. The novel CBM-Rf6A from this protein has been crystallized and data were processed for the native and a selenomethionine derivative to 1.75 and 1.5 Šresolution, respectively. The crystals belonged to orthorhombic and cubic space groups, respectively. The structure was solved by a single-wavelength anomalous dispersion experiment using the CCP4 program suite and SHELXC/D/E.

Expression, purification and crystallization of a novel carbohydrate-binding module from the Ruminococcus flavefaciens cellulosome.

Anaerobic bacteria organize carbohydrate-active enzymes into a multi-component complex, the cellulosome, which degrades cellulose and hemicellulose highly efficiently. Genome sequencing of Ruminococcus flavefaciens FD-1 offers extensive information on the range and diversity of the enzymatic and structural components of the cellulosome. The R. flavefaciens FD-1 genome encodes over 200 dockerin-containing proteins, most of which are of unknown function. One of these modular proteins comprises a glycoside hydrolase family 5 catalytic module (GH5) linked to an unclassified carbohydrate-binding module (CBM-Rf1) and a dockerin. The novel CBM-Rf1 has been purified and crystallized. The crystals belonged to the trigonal space group R32:H. The CBM-Rf1 structure was determined by a multiple-wavelength anomalous dispersion experiment using AutoSol from the PHENIX suite using both selenomethionyl-derivative and native data to resolutions of 2.28 and 2.0 Å, respectively.

Overexpression, crystallization and preliminary X-ray characterization of Ruminococcus flavefaciens scaffoldin C cohesin in complex with a dockerin from an uncharacterized CBM-containing protein.

Cellulosomes are massive cell-bound multienzyme complexes tethered by macromolecular scaffolds that coordinate the efforts of many anaerobic bacteria to hydrolyze plant cell-wall polysaccharides, which are a major untapped source of carbon and energy. Integration of cellulosomal components occurs via highly ordered protein-protein interactions between cohesin modules, located in the scaffold, and dockerin modules, found in the enzymes and other cellulosomal proteins. The proposed cellulosomal architecture for Ruminococcus flavefaciens strain FD-1 consists of a major scaffoldin (ScaB) that acts as the backbone to which other components attach. It has nine cohesins and a dockerin with a fused X-module that binds to the cohesin on ScaE, which in turn is covalently attached to the cell wall. The ScaA dockerin binds to ScaB cohesins allowing more carbohydrate-active modules to be assembled. ScaC acts as an adaptor that binds to both ScaA and selected ScaB cohesins, thereby increasing the repertoire of dockerin-bearing proteins that integrate into the complex. In previous studies, a screen for novel cohesin-dockerin complexes was performed which led to the identification of a total of 58 probable cohesin-dockerin pairs. Four were selected for subsequent structural and biochemical characterization based on the quality of their expression and the diversity in their specificities. One of these is C12D22, which comprises the cohesin from the adaptor ScaC protein bound to the dockerin of a CBM-containing protein. This complex has been purified and crystallized, and data were collected to resolutions of 2.5 Š(hexagonal, P65), 2.16 Š(orthorhombic, P212121) and 2.4 Š(orthorhombic, P21212) from three different crystalline forms.

Atypical cohesin-dockerin complex responsible for cell surface attachment of cellulosomal components: binding fidelity, promiscuity, and structural buttresses.

The rumen bacterium Ruminococcus flavefaciens produces a highly organized multienzyme cellulosome complex that plays a key role in the degradation of plant cell wall polysaccharides, notably cellulose. The R. flavefaciens cellulosomal system is anchored to the bacterial cell wall through a relatively small ScaE scaffoldin subunit, which bears a single type IIIe cohesin responsible for the attachment of two major dockerin-containing scaffoldin proteins, ScaB and the cellulose-binding protein CttA. Although ScaB recruits the catalytic machinery onto the complex, CttA mediates attachment of the bacterial substrate via its two putative carbohydrate-binding modules. In an effort to understand the structural basis for assembly and cell surface attachment of the cellulosome in R. flavefaciens, we determined the crystal structure of the high affinity complex (Kd = 20.83 nM) between the cohesin module of ScaE (CohE) and its cognate X-dockerin (XDoc) modular dyad from CttA at 1.97-Å resolution. The structure reveals an atypical calcium-binding loop containing a 13-residue insert. The results further pinpoint two charged specificity-related residues on the surface of the cohesin module that are responsible for specific versus promiscuous cross-strain binding of the dockerin module. In addition, a combined functional role for the three enigmatic dockerin inserts was established whereby these extraneous segments serve as structural buttresses that reinforce the stalklike conformation of the X-module, thus segregating its tethered complement of cellulosomal components from the cell surface. The novel structure of the RfCohE-XDoc complex sheds light on divergent dockerin structure and function and provides insight into the specificity features of the type IIIe cohesin-dockerin interaction.