Decoding the mannose receptor-mAb interaction: the importance of high-mannose N-glycans and glycan-pairing.

During the development process of therapeutic monoclonal antibodies (mAbs), it is crucial to control (critical) quality attributes such as N-glycosylation influencing pharmacokinetics (PK) and Fc effector functions. Previous reports have shown that mAbs containing high-mannose N-glycans are cleared faster from blood circulation, leading to reduced half-lives. The high-mannose N-glycan content of mAbs can be influenced during the cell culture process by factors such as cell lines, process conditions, and media. Furthermore, mAbs have either one high mannose N-glycan (asymmetrical high-mannose glyco-pair) or two high mannose N-glycans (symmetrical high-mannose glyco-pair). The hypothesis that the mannose receptor (MR, CD206) accelerates clearance by facilitating their internalization and subsequent lysosomal degradation is widespread. However, the interaction between MR and mAbs has not been explicitly demonstrated. This study aimed to investigate this interaction, providing the first systematic demonstration of MR binding to the Fc region of mAbs with high-mannose N-glycans. Two novel analytical methods, MR surface plasmon resonance and MR affinity chromatography, were developed and applied to investigate the MR-mAb interaction. The interaction is found to be dependent on high-mannose content, but is independent of the mAb format or sequence. However, different glyco-pairs exhibited varying binding affinities to the MR, with the symmetrical high-mannose glyco-pair showing the strongest binding properties. These findings strengthen the hypothesis for the MR-mediated mAb interaction and contribute to a deeper understanding of the MR-mAb interaction, which could affect the criticality of high-mannose containing mAbs development strategies of IgG-based molecules and improve their PK profiles.

High-Active Surface of Centimeter-Scale ß-In2S3 for Attomolar-Level Hg2+ Sensing.

Recognition layer materials play a crucial role in the functionality of chemical sensors. Although advancements in two-dimensional (2D) materials have promoted sensor development, the controlled fabrication of large-scale recognition layers with highly active sites remains crucial for enhancing sensor sensitivity, especially for trace detection applications. Herein, we propose a strategy for the controlled preparation of centimeter-scale non-layered ultrathin ß-In2S3 materials with tailored high-active sites to design ultrasensitive Hg2+ sensors. Our results reveal that the highly active sites of non-layered ß-In2S3 materials are pivotal for achieving superior sensing performance. Selective detection of Hg2+ at the 1 aM level is achieved via selective Hg-S bonding. Additionally, we evaluate that this sensor exhibits excellent performance in detecting Hg2+ in the tap water matrix. This work provides a proof-of-concept for utilizing non-layered 2D films in high-performance sensors and highlights their potential for diverse analyte sensing applications.

Recent advances in receptor-based optical biosensors for the detection of multiplex biomarkers.

Multiplex biosensors are highly sought-after tools in disease diagnosis. This technique involves the simultaneous sensing of multiple biomarkers, whose levels and ratios can provide a more comprehensive assessment of disease conditions compared to single biomarker detection. In most diseases like cancer due to its complexity, several biomarkers are involved in their occurrence. On the other hand, a single biomarker may be implicated in various diseases. Multiplex sensing employs various techniques, such as optical, electrochemical, and electrochemiluminescence methods. This comprehensive review focuses on optical multiplex sensing techniques, including surface plasmon resonance, localized surface plasmon resonance, fluorescence resonance energy transfer, chemiluminescence, surface-enhanced Raman spectroscopy, and photonic crystal sensors. The review delves into their mechanisms, materials utilized, and strategies for biomarker detection.

Engineering and physicochemical characterization of a novel, stable, symmetric bispecific antibody with dual target-binding using a common light chain.

Bispecific antibodies (BsAbs) have emerged as a major class of antibody therapeutics owing to their substantial potential in disease treatment. While several BsAbs have been successfully approved in recent years, ongoing development efforts continue to focus on optimizing various BsAbs tailored to particular antigens and action mechanisms, aiming to achieve favorable physicochemical properties. BsAbs generally encounter challenges due to their unfavorable physicochemical characteristics and poor manufacturing efficiencies, highlighting the need for optimization to achieve reliable productivity and developability. Herein, we describe the development of a novel symmetric BsAb, REGULGENT™ (N-term/C-term), comprising two Fab domains, using a common light chain. The heavy chain fragment encoded two antigen-binding determinants in one chain. The design and production of REGULGENT™ (N-term/C-term) are simple owing to the use of the same light chain, which does not induce heavy and light chain mispairing, frequently observed with the asymmetric BsAb format. REGULGENT™ (N-term/C-term) exhibited high expression and low aggregation characteristics during cell culture and stress treatment under low pH conditions. Differential scanning calorimetric data indicated that REGULGENT™ molecules had high conformational stability, similar to that of stabilized monoclonal antibodies. Surface plasmon resonance data showed that REGULGENT™ (N-term/C-term) could bind to two antigens simultaneously and exhibited a high affinity for two antigens. In summary, the symmetric BsAb format of REGULGENT™ confers its desirable IgG-like physicochemical properties, thus making it an excellent candidate for commercial development. The findings demonstrate a novel BsAb with substantial development potential for clinical applications.

PPR21 is involved in the splicing of nad2 introns via interacting with PPR-SMR1 and SPR2 and is essential to maize seed development.

Pentatricopeptide repeat (PPR) proteins are a large group of eukaryote-specific RNA-binding proteins that play pivotal roles in plant organelle gene expression. Here, we report the function of PPR21 in mitochondrial intron splicing and its role in maize kernel development. PPR21 is a typical P-type PPR protein targeted to mitochondria. The ppr21 mutants are arrested in embryogenesis and endosperm development, leading to embryo lethality. Null mutations of PPR21 reduce the splicing efficiency of nad2 intron 1, 2, and 4 and impair the assembly and activity of mitochondrial complex I. Previous studies show that the P-type PPR protein EMP12 is required for the splicing of identical introns. However, our protein interaction analyses reveal that PPR21 does not interact with EMP12. Instead, both PPR21 and EMP12 interact with the small MutS-related (SMR) domain-containing PPR protein 1 (PPR-SMR1) and the short P-type PPR protein 2 (SPR2). PPR-SMR1 interacts with SPR2, and both proteins are required for the splicing of many introns in mitochondria, including nad2 intron 1, 2, and 4. These results suggest that a PPR21-(PPR-SMR1/SPR2)-EMP12 complex is involved in the splicing of nad2 introns in maize mitochondria.

Unveiling novel insights into human IL-6 - IL-6R interaction sites through 3D computer-guided docking and systematic site mutagenesis.

The cytokine interleukin-6 (IL-6) plays a crucial role in autoimmune and inflammatory diseases. Understanding the precise mechanism of IL-6 interaction at the amino acid level is essential to develop IL-6-inhibiting compounds. In this study, we employed computer-guided drug design tools to predict the key residues that are involved in the interaction between IL-6 and its receptor IL-6R. Subsequently, we generated IL-6 mutants and evaluated their binding affinity to IL-6R and the IL-6R - gp130 complex, as well as monitoring their biological activities. Our findings revealed that the R167A mutant exhibited increased affinity for IL-6R, leading to enhanced binding to IL-6R - gp130 complex and subsequently elevated intracellular phosphorylation of STAT3 in effector cells. On the other hand, although E171A reduced its affinity for IL-6R, it displayed stronger binding to the IL-6R - gp130 complex, thereby enhancing its biological activity. Furthermore, we identified the importance of R178 and R181 for the precise recognition of IL-6 by IL-6R. Mutants R181A/V failed to bind to IL-6R, while maintaining an affinity for the IL-6 - gp130 complex. Additionally, deletion of the D helix resulted in complete loss of IL-6 binding affinity for IL-6R. Overall, this study provides valuable insights into the binding mechanism of IL-6 and establishes a solid foundation for future design of novel IL-6 inhibitors.

Crystal structure combined with metabolomics and biochemical studies indicates that FAM3A participates in fatty acid beta-oxidation upon binding of acyl-L-carnitine.

As the first member of the family with sequence similarity 3 (FAM3), FAM3A promotes synthesis of ATP in mitochondria of hepatic cells and cells from other organs. Dysregulations of FAM3A are involved in the development of diabetes and nonalcoholic fatty liver disease (NAFLD). So far, the molecule mechanism under the physiological and pathological functions of FAM3A is largely unexplored. Here, we determined the crystal structure of FAM3A at high resolution of 1.38Å, complexed with an unknown-source compound which was characterized through metabolomics and confirmed as methacholine by thermal shift assay and surface plasmon resonance (SPR). Exploration for natural ligands of FAM3A was conducted through the same molecular interaction assays. The observed binding of acyl-L-carnitine molecules indicated FAM3A participating in fatty acid beta-oxidation. Knockdown and rescue assays coupled with fatty acid oxidation determination confirmed the role of FAM3A in beta-oxidation. This investigation reveals the molecular mechanism for the biological function of FAM3A and would provide basis for identifying drug target for treatment of diabetes and NAFLD.

Nanosensors Based on Bimetallic Plasmonic Layer and Black Phosphorus: Application to Urine Glucose Detection.

This paper presents a new biosensor design based on the Kretschmann configuration, for the detection of analytes at different refractive indices. Our studied design consists of a TiO2/SiO2 bi-layer sandwiched between a BK7 prism and a bimetallic layer of Ag/Au plasmonic materials, covered by a layer of black phosphorus placed below the analyte-containing detection medium. The different layers of our structure and analyte detection were optimized using the angular interrogation method. High performance was achieved, with a sensitivity of 240 deg/RIU and a quality factor of 34.7 RIU-1. This biosensor can detect analytes with a wide refractive index range between 1.330 and 1.347, such as glucose detection in urine samples using a refractive index variation of 10-3. This capability offers a wide range of applications for biomedical and biochemical detection and selectivity.

Biosensor-based active ingredient recognition system for screening potential small molecular Severe acute respiratory syndrome coronavirus 2 entry blockers targeting the spike protein from Rugosa rose.

The traditional formulation Hanchuan zupa granules (HCZPs) have been widely used for controlling coronavirus disease 2019 (COVID-19). However, its active components remain unknown. Here, HCZP components targeting the spike receptor-binding domain (S-RBD) of SARS-CoV-2 were investigated using a surface plasmon resonance (SPR) biosensor-based active ingredient recognition system (SPR-AIRS). Recombinant S-RBD proteins were immobilized on the SPR chip by amine coupling for the prescreening of nine HCZP medicinal herbs. Ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) identified gallic acid (GA) and methyl gallate (MG) from Rosa rugosa as S-RBD ligands, with KD values of 2.69 and 0.95 µM, respectively, as shown by SPR. Molecular dynamics indicated that GA formed hydrogen bonds with G496, N501, and Y505 of S-RBD, and MG with G496 and Y505, inhibiting S-RBD binding to angiotensin-converting enzyme 2 (ACE2). SPR-based competition analysis verified that both compounds blocked S-RBD and ACE2 binding, and SPR demonstrated that GA and MG bound to ACE2 (KD = 5.10 and 4.05 µM, respectively), suggesting that they blocked the receptor and neutralized SARS-CoV-2. Infection with SARS-CoV-2 pseudovirus showed that GA and MG suppressed viral entry into 293T-ACE2 cells. These S-RBD inhibitors have potential for drug design, while the findings provide a reference on HCZP composition and its use for treating COVID-19.

5-Oxo-7,7-Dimethyl-5,6,7,8-Tetrahydro-4-H-Chromene Bearing N, N-Dimethylaniline as Turn-Off Fluorescent Chemosensor for Picric Acid in Real Water Sample.

We have synthesized a one-pot, three-component pyran-based fluorescence chemosensor using onion extract as a green catalyst. The confirmed structure of the 1:2 binding of receptor SPR-2-picric acid adduct revealed that the pyran-based receptor accommodated two guest picric acid molecules through non-covalent interactions. UV-Vis and fluorescence spectroscopy show high selectivity and sensitivity towards picric acid. The 1D/2D NMR and Job's plot analysis show the complexation and stoichiometric binding of the receptor SPR-2 with picric acid are 1:2. The 1H NMR spectral studies confirm that the formation of receptor SPR-2-picric acid adduct via weak hydrogen bonding. The cooperativity of the receptor SPR-2-picric acid adduct shows negative cooperativity due to the weak hydrogen bonding of receptor SPR-2 and picric acid. Further, the density functional theory (DFT) confirmed the molecular level interaction of the SPR-2 and receptor SPR-2-Picric acid adduct. The receptor was effectively used to assess picric acid concentrations in real water samples.

An Optical Device Based on a Chemical Chip and Surface Plasmon Platform for 2-Furaldehyde Detection in Insulating Oil.

2-Furaldehyde (2-FAL) is one of the main by-products of the degradation of hemicellulose, which is the solid material of the oil-paper insulating system of oil-filled transformers. For this reason, it has been suggested as a marker of the degradation of the insulating system; sensing devices for 2-FAL analysis in a wide concentration range are of high interest in these systems. An optical sensor system is proposed; this consists of a chemical chip, able to capture 2-FAL from the insulating oil, coupled with a surface plasmon resonance (SPR) probe, both realized on multimode plastic optical fibers (POFs). The SPR platform exploits gold nanofilm or, alternatively, a double layer of gold and silicon oxide to modulate the sensor sensitivity. The capturing chip is always based on the same molecularly imprinted polymer (MIP) as a receptor specific for 2-FAL. The system with the SPR probe based on a gold nanolayer had a higher sensitivity and a lower detection limit of fractions of µg L-1. Instead, the SPR probe, based on a double layer (gold and silicon oxide), has a lower sensitivity with a worse detection limit, and it is suitable for the detection of 2-FAL at concentrations of 0.01-1 mg L-1.

An Efficient Bio-Receptor Layer Combined with a Plasmonic Plastic Optical Fiber Probe for Cortisol Detection in Saliva.

Cortisol is a clinically validated stress biomarker that takes part in many physiological and psychological functions related to the body's response to stress factors. In particular, it has emerged as a pivotal tool for understanding stress levels and overall well-being. Usually, in clinics, cortisol levels are monitored in blood or urine, but significant changes are also registered in sweat and saliva. In this work, a surface plasmon resonance probe based on a D-shaped plastic optical fiber was functionalized with a glucocorticoid receptor exploited as a highly efficient bioreceptor specific to cortisol. The developed plastic optical fiber biosensor was tested for cortisol detection in buffer and artificial saliva. The biosensor response showed very good selectivity towards other hormones and a detection limit of about 59 fM and 96 fM in phosphate saline buffer and artificial saliva, respectively. The obtained detection limit, with a rapid detection time (about 5 min) and a low-cost sensor system, paved the way for determining the cortisol concentration in saliva samples without any extraction process or sample pretreatment via a point-of-care test.

A protocol to isolate, identify, and verify glucose- or carbohydrate-binding receptors.

Sensing, transport, and utilization of glucose is pivotal to the maintenance of energy homeostasis in animals. Although transporters involved in mobilizing glucose across different cellular compartments are fairly well known, the receptors that bind glucose to mediate its effects independently of glucose metabolism remain largely unrecognized. Establishing precise and reproducible methods to identify glucose receptors in the brain or other peripheral organs will pave the way for comprehending the role of glucose signaling pathways in maintaining, regulating, and reprogramming cellular metabolic needs. Identification of such potential glucose receptors will also likely lead to development of effective therapeutics for treatment of diabetes and related metabolic disorders. Commercially available biotin or radiolabeled glucose conjugates have low molecular weight; therefore, they do not provide enough sensitivity and density to isolate glucose receptors. Here, we describe a protocol to isolate, identify, and verify glucose-binding receptor/s using high molecular weight glucose (or other carbohydrate) conjugates. We have produced 30 kDa glucose- (or other carbohydrate-) biotin-polyacrylamide (PAA) conjugates with mole fractions of 80:5:15% respectively. These conjugates are used with biotin-streptavidin biochemistry, In-cell ELISA, and surface plasmon resonance (SPR) methods to isolate, identify, and verify glucose- or carbohydrate-binding receptors. We first demonstrate how streptavidin-coated magnetic beads are employed to immobilize glucose-biotin-PAA conjugates. Then, these beads are used to enrich and isolate glucose-binding proteins from tissue homogenates or from single-cell suspensions. The enriched or isolated proteins are subjected to mass spectrometry/proteomics to reveal the identity of top candidate proteins as potential glucose receptors. We then describe how the In-cell ELISA method is used to verify the interaction of glucose with its potential receptor through stable expression of the receptor in-vitro. We further demonstrate how a highly sensitive SPR method can be used to measure the binding kinetics of glucose with its receptor. In summary, we describe a protocol to isolate, identify, and verify glucose- or carbohydrate-binding receptors using magnetic beads, In-cell ELISA, and SPR. This protocol will form the future basis of studying glucose or carbohydrate receptor signaling pathways in health and in disease.

Nanohole array integrated metal insulator metal (MIM) based structure employing dual mode SPR sensor for detection of Hemoglobin (Hb) in blood.

Surface Plasmon Resonance (SPR) based optical biosensors are recently the most attractive sensing devices that can detect minor changes in refractive index. Multiple methods have been developed to design SPR based biosensors with high-performance and ease of fabrication. This research is about a grating based biosensor that utilizes Silver (Ag) and Titanium (Ti) to produce the SP resonance state. The structure has a resonance wavelength, which displays sensitivity to changes in the surrounding medium of the refractive index. The study has been conducted using numerical simulations, utilizing the finite-difference-time-domain (FDTD) method.The simulation results shows a sharp resonance peaks in the wavelength range of 450-700 nm with a remarkable sensitivity of 172 nm/RIU (for mode 1 at SPR peak 465 nm) and 515 nm/RIU (for mode 2 at SPR peak 585 nm), which is superior to other on-chip device. The investigation involves a comparative analysis of sensing performance, focusing on parameters like transmission, reflection, FWHM and Quality factor to measure the detection accuracy of the proposed material combination. Later, we employed this miniature biosensor device to detect hemoglobin concentrations in the blood. Our findings indicate that this developed structure has great potential for detecting any biomolecule, such as proteins, glucose, fructose, nucleic acids, and cells.

Application and Method of Surface Plasmon Resonance Technology in the Preparation and Characterization of Biomedical Nanoparticle Materials.

Surface Plasmon Resonance (SPR) technology, as a powerful analytical tool, plays a crucial role in the preparation, performance evaluation, and biomedical applications of nanoparticles due to its real-time, label-free, and highly sensitive detection capabilities. In the nanoparticle preparation process, SPR technology can monitor synthesis reactions and surface modifications in real-time, optimizing preparation techniques and conditions. SPR enables precise measurement of interactions between nanoparticles and biomolecules, including binding affinities and kinetic parameters, thereby assessing nanoparticle performance. In biomedical applications, SPR technology is extensively used in the study of drug delivery systems, biomarker detection for disease diagnosis, and nanoparticle-biomolecule interactions. This paper reviews the latest advancements in SPR technology for nanoparticle preparation, performance evaluation, and biomedical applications, discussing its advantages and challenges in biomedical applications, and forecasting future development directions.

Restoration of sleep-wake behavior following short photoperiod exposure in ventral subicular lesioned male Wistar rats: A 24-h sleep-wake electroencephalographical study.

The ventral subiculum regulates emotion, stress responses, and spatial and social cognition. In our previous studies, we have demonstrated anxiety- and depression-like symptoms, deficits in spatial and social cognition in ventral subicular lesioned (VSL) rats, and restoration of affective and cognitive behaviors following photoperiod manipulation (short photoperiod regime, SPR; 6:18 LD cycle). In the present study, we have studied the impact of VSL on sleep-wake behavioral patterns and the effect of SPR on sleep-wakefulness behavior. Adult male Wistar rats subjected to VSL demonstrated decreased wake duration and enhanced total sleep time due to increased non-rapid eye movement sleep (NREMS) and rapid eye movement sleep (REMS). Power spectral analysis indicated increased delta activity during NREMS and decreased sigma band power during all vigilance states. Light is one of the strongest entrainers of the circadian rhythm, and its manipulation may have various physiological and functional consequences. We investigated the effect of 21-day exposure to SPR on sleep-wakefulness (S-W) behavior in VSL rats. We observed that SPR exposure restored S-W behavior in VSL rats, resulting in an increase in wake duration and a significant increase in theta power during wake and REMS. This study highlights the crucial role of the ventral subiculum in maintaining normal sleep-wakefulness patterns and highlights the effectiveness of photoperiod manipulation as a non-pharmacological treatment for reversing sleep disturbances reported in mood and neuropsychiatric disorders like Alzheimer's disease, bipolar disorder, and major depressive disorder, which also involve alterations in circadian rhythm.

Surface Plasmon Resonance Sensor Based on Fe2O3/Au for Alcohol Concentration Detection.

Hematite (α-Fe2O3) is widely used in sensor sensitization due to its excellent optical properties. In this study, we present a sensitivity-enhanced surface plasmon resonance alcohol sensor based on Fe2O3/Au. We describe the fabrication process of the sensor and characterize its structure. We conduct performance testing on sensors coated multiple times and use solutions with the same gradient of refractive indices as the sensing medium. Within the refractive index range of 1.3335-1.3635, the sensor that was coated twice achieved the highest sensitivity, reaching 2933.2 nm/RIU. This represents a 30.26% enhancement in sensitivity compared to a sensor with a pure gold monolayer film structure. Additionally, we demonstrated the application of this sensor in alcohol concentration detection by testing the alcohol content of common beverages, showing excellent agreement with theoretical values and highlighting the sensor's potential in food testing.

Grating Structures for Silver-Based Surface Plasmon Resonance Sensors with Adjustable Excitation Angle.

Silver-based grating structures offer means for implementing low-cost, efficient grating couplers for use in surface plasmon resonance (SPR) sensors. One-dimensional grating structures with a fixed periodicity are confined to operate effectively within a single planar orientation. However, two-dimensional grating structures as well as grating structures with variable periodicity allow for the plasmon excitation angle to be seamlessly adjusted. This study demonstrates silver-based grating designs that allow for the plasmon excitation angle to be adjusted via rotation or beam position. The flexible angle adjustment opens up the possibility of developing SPR sensor designs with an expanded dynamic range and increased flexibility in sensing applications. The results demonstrate that efficient coupling into two diffraction orders is possible, which ultimately leads to an excitation angle range from 16° to 40° by rotating a single structure. The findings suggest a promising direction for the development of versatile and adaptable SPR sensing platforms with enhanced performance characteristics.

Evaluation of Corrosion and Its Impact on the Mechanical Performance of Al-Steel Joints.

Aluminum-steel joints are increasingly used in the automotive industry to meet the requirements for energy saving and emission reduction. Among various joining technologies, self-pierce riveting (SPR) and resistance spot welding (RSW) are two well-established technologies for fabricating dissimilar joints with stable and high mechanical performance. However, corrosion will occur in these joints inevitably due to different electrochemical properties, which can degrade the surface quality and the mechanical performance, such as strength. This paper presents a method of understanding the corrosion mechanisms in joining aluminum and steel. For this understanding, a hybrid method combining experimental observations, mechanical properties identification, and analytical approaches was used to assess the evolution of the impact of corrosion on the joining performance, such as traction separation curves. The study was conducted on common combinations used in the vehicles, e.g., a 1.2 mm thickness aluminum alloy (AA 6022) and 2.0 mm thickness hot deep galvanized steel (HDG HSLA 340) joined by SPR and RSW. After the fabrication of these joints, accelerated cyclic corrosion tests of up to 104 cycles were performed, which reproduced the environmental conditions to which a vehicle was exposed. By investigating the microstructural evolution within the joints, the corrosion mechanisms of SPR and RSW joints were revealed, including the initiation and propagation. Moreover, the intrinsic impact of the corrosion on the mechanical performance, including the strength, axial stiffness, and crashworthiness, was analyzed by performing a lap-shear test. It showed that as corrosion proceeds, the fracture modes and mechanical performance are affected significantly.

Synthesis of 3D Sb2O3-based heterojunction reinforced by SPR effect and photo-Fenton mechanism for upgraded oxidation of metronidazole in water environments.

The traditional homogenous and heterogenous Fenton reactions have frequently been restrained by the lower production of Fe2+ ions, which significantly obstructs the generation of hydroxyl radicals from the decomposition of H2O2. Thus, we introduce novel photo-Fenton-assisted plasmonic heterojunctions by immobilizing Fe3O4 and Bi nanoparticles onto 3D Sb2O3 via co-precipitation and solvothermal approaches. The ternary Sb2O3/Fe3O4/Bi composites offered boosted photo-Fenton behavior with a metronidazole (MNZ) oxidation efficiency of 92% within 60 min. Among all composites, the Sb2O3/Fe3O4/Bi-5% hybrid exhibited an optimum photo-Fenton MNZ reaction constant of 0.03682 min- 1, which is 5.03 and 2.39 times higher than pure Sb2O3 and Sb2O3/Fe3O4, respectively. The upgraded oxidation activity was connected to the complementary outcomes between the photo-Fenton behavior of Sb2O3/Fe3O4 and the plasmonic effect of Bi NPs. The regular assembly of Fe3O4 and Bi NPs enhances the surface area and stability of Sb2O3/Fe3O4/Bi. Moreover, the limited absorption spectra of Sb2O3 were extended into solar radiation by the Fe3+ defect of Fe3O4 NPs and the surface plasmon resonance (SPR) effect of Bi NPs. The photo-Fenton mechanism suggests that the co-existence of Fe3O4/Bi NPs acts as electron acceptor/donor, respectively, which reduces recombination losses, prolongs the lifetime of photocarriers, and produces more reactive species, stimulating the overall photo-Fenton reactions. On the other hand, the photo-Fenton activity of MNZ antibiotics was optimized under different experimental conditions, including catalyst loading, solution pH, initial MNZ concentrations, anions, and real water environments. Besides, the trapping outcomes verified the vital participation of •OH, h+, and •O2- in the MNZ destruction over Sb2O3/Fe3O4/Bi-5%. In summary, this work excites novel perspectives in developing boosted photosystems through integrating the photocatalysis power with both Fenton reactions and the SPR effects of plasmonic materials.