Comparative assessment of microbiome and resistome of influent and effluent of sewage treatment plant and common effluent treatment plant located in Delhi, India using shotgun approach.

Antimicrobial resistance (AMR) is a significant threat that demands surveillance to identify and analyze trends of the emerging antibiotic resistance genes (ARGs) and potential microbial carriers. The influent of the wastewater treatment plants (WWTPs) reflects the microbes derived from the population and effluent being the source of dissemination of potential pathogenic microbes and AMR. The present study aimed to monitor microbial communities and antibiotic resistance genes in WWTPs employing a whole metagenome shotgun sequencing approach. The samples were collected from a sewage treatment plant (STP) and a common effluent treatment plant (CETP) in Delhi, India. The results showed the influent of STP to be rich in Bifidobacterium, Bacteroides, Escherichia, Arcobacter, and Pseudomonas residents of gut microbiota and known to cause diseases in humans and animals; whereas the CETP sample was abundant in Aeromonas, Escherichia, and Shewanella known to be involved in the degradation of different compounds. Interestingly, the effluent samples from both STPs and CETP were rich in microbial diversity, comprising organic and xenobiotic compound degrading and disease-causing bacteria, indicating the effluent being the source of dissemination of concerning bacteria to the environment. The functional profile at both sites displayed similarity with an abundance of housekeeping function genes as analyzed by Clusters of Orthologous Genes (COG), KEGG Orthology (KO), and subsystem databases. Resistome profiling by MEGARes showed the dominance of ARGs corresponding to beta-lactams having relative abundance ranging from 16% to 34% in all the metagenome datasets, followed by tetracycline (8%-16%), aminoglycosides (7%-9%), multi-drug (5%-9%), and rifampin (3%-9%). Also, AMR genes oxa, ant3-DPRIME, and rpoB, which are of clinical importance were predominantly and most prevalently present in all the samples. The presence of AMR in effluents from both types of treatment plants indicates that wastewater from both sources contributes to the spread of pathogenic bacteria and resistance genes, increasing the environmental AMR burden and therefore requires tertiary treatment before discharge. This work will facilitate further research towards the identification of suitable biomarkers for monitoring antibiotic resistance.

Effect driven prioritization of contaminants in wastewater treatment plants across China: A data mining-based toxicity screening approach.

A diversity of contaminants of emerging concern (CECs) are present in wastewater effluent, posing potential threats to receiving waters. It is urgent for a holistic assessment of the occurrence and risk of CECs related to wastewater treatment plants (WWTP) on national and regional scales. A data mining-based risk prioritization method was developed to collect the reported contaminants and their respective concentrations in municipal and industrial WWTPs and their receiving waters across China over the past 20 years. A total of 10,781 chemicals were reported in 8336 publications, of which 1037 contaminants were reported with environmental concentrations. While contaminant categories varied across WWTP types (municipal vs. industrial) and regions, pharmaceuticals and cyclic hydrocarbons were the most studied CECs. Contaminant composition in receiving water was closer to that in municipal than industrial WWTPs. Publications on legacy pesticides and polycyclic aromatic hydrocarbons in WWTP decreased recently compared to the past, while pharmaceuticals and perfluorochemicals have received increasing attention, showing a changing concern over time. Detection frequency, concentration, removal efficiency, and toxicity data were integrated for assessing potential risks and prioritizing CECs on national and regional scales using an environmental health prioritization index (EHPi) approach. Among 666 contaminants in municipal WWTP effluent, trichlorfon and perfluorooctanesulfonic acid were with the highest EHPi scores, while 17ɑ-ethinylestradiol and bisphenol A had the highest EHPi scores among 304 contaminants in industrial WWTPs. The prioritized contaminants varied across regions, suggesting a need for tailoring regional measures of wastewater treatment and control.

Low-cost, reliable, and highly efficient removal of COD and total nitrogen from sewage using a sponge-filled trickling filter.

Development of low-cost and reliable reactors demanding minimal supervision is a need-of-the-hour for sewage treatment in rural areas. This study explores the performance of a multi-stage sponge-filled trickling filter (SPTF) for sewage treatment, employing polyethylene (PE) and polyurethane (PU) media. Chemical oxygen demand (COD) and nitrogen transformation were evaluated at hydraulic loading rates (HLRs) ranging from 2 to 6 m/d using synthetic sewage as influent. At influent COD of ∼350 mg/L, PU-SPTF and PE-SPTF achieved a COD removal of 97% across all HLRs with most of the removal occurring in the first segments. Operation of PE-SPTF at an HLR of 6 m/d caused substantial wash-out of biomass, while PU-SPTF retained biomass and achieved effluent COD < 10 mg/L even at HLR of 8-10 m/d. The maximum Total Nitrogen removal by PE-SPTF and PU-SPTF reactors was 93.56 ± 1.36 and 92.24 ± 0.66%, respectively, at an HLR of 6 m/d. Simultaneous removal of ammonia and nitrate was observed at all the HLRs in the first segment of both SPTFs indicating ANAMMOX activity. COD removal data, media depth, and HLRs were fitted (R2 > 0.99) to a first-order kinetic relationship. For a comparable COD removal, CO2 emission by PU-SPTF was 3.5% of that of an activated sludge system.

Native and non-native freshwater bivalves in the bioremediation of bacterial pollution caused by the disposal of sewage.

Treated sewage contains a large diversity of pathogens that can be transmitted to the environment and, directly or indirectly, infect humans through water use (i.e., consumption, bathing, or irrigation). In urban environments, wastewater normally flows into wastewater treatment plants (WWTPs), where it is subjected to different processes in order to eliminate the greatest amount of waste. However, there are inequalities among European countries concerning wastewater management. In this context, we evaluate the potential of freshwater mussels to improve water quality (i.e., reduce bacterial abundance) in rivers receiving primary, secondary, or tertiary sewage-treated effluents. Additionally, because freshwater mussels are declining at a global scale and empty niches are progressively occupied by non-native counterparts, we evaluate if depauperate communities and the Asian clams, Corbicula genus, can provide equivalent ecosystem services (i.e., water quality improvement by biofiltration) formerly provided by diverse native communities. For this, an analysis of the bacterial biodiversity of the samples filtered by the different bivalve communities was carried out. The experimental approach was performed by metabarcoding the 16S rRNA gene using Illumina technologies. According to the results obtained, secondary treatment processes were effective in reducing the bacterial diversity. Furthermore, the waters filtered by the bivalves presented a lower bacterial abundance for certain genera. Biofiltration differs, however, among species, with Corbicula reducing a large number of taxa much more efficiently than native freshwater mussels in both diverse and depauperated communities. These results are likely related to Corbicula being a generalist species in front of native mussels, which may be more selective. Considering it is not possible to eradicate Corbicula from European rivers, its filtering capacity should be considered when managing freshwater ecosystems.

Accelerating microplastic contamination in 210Pb dated sediment cores from an urbanized coastal lagoon (NW Mexico) since the 1990s.

The ubiquity of microplastics (MP) across all ecosystems raises concerns about their potential harm to the environment and living organisms. Sediments are a MP sink, reflecting long-term accumulation and historical anthropogenic impacts. Three 210Pb-dated sediment cores were used to understand the temporal variations of MP abundances (particles kg-1) and fluxes (particles m-2 year-1) within the past century in Estero de Urías Lagoon, an urbanized coastal lagoon in the Mexican Pacific. MP particles, extracted from sediments by density separation (saturated NaCl solution) were counted using a stereomicroscope, under visible and ultraviolet light on Nile red (NR) stained filters. The polymer composition was determined in ∼10 % of the suspected MP particles using Fourier Transform Infrared spectrometry. Fibers (66 to 89 % of the total particles) predominated over fragments (11 to 34 %). Before 1950, no MP particles were detected. Polyethylene terephthalate (PET) was the prevalent synthetic polymer (up to 50 % of the particles), while semisynthetic cellulosic fibers were predominant, underscoring the broader scope of anthropogenic contamination. Suspected MP abundances (NR stained filters) were highest in the core collected at the innermost area, which was attributed to the lagoon's hydrodynamics, since current velocities decrease from the proximal to the distal area to the sea. From the regression between MP fluxes and time elapsed since sediments deposited, the cores showed consistent accelerated increases of MP burial since mid-20th century, most likely because of the increasing availability of plastic products and population growth, with the consequent increment in plastic waste and wastewater releases. Our findings emphasize the growing MP pollution challenges at EUL, which may directly impact subsistence fishing and shrimp aquaculture activities, threatening local livelihoods and food sources; and also highlight the need for improved waste management and pollution control strategies in rapidly industrializing regions, to protect both aquatic ecosystems and human populations dependent on fishing products.

Wood Sponge for Oil-Water Separation.

In addition to filtering some sediments, hydrophobic wood sponges can also absorb many organic solvents, particularly crude oil. The leakage of crude oil poses a serious threat to the marine ecosystem, and oil mixed with water also generates great danger for its use. From the perspective of low cost and high performance, wood sponges exhibit great potential for dealing with crude oil pollution. Wood sponge is a renewable material. With a highly oriented layered structure and a highly compressible three-dimensional porous frame, wood sponges are extremely hydrophobic, making them ideal for oil-water separation. Currently, the most common approach for creating wood sponge is to first destroy the wood cell wall to obtain a porous-oriented layered structure and then enhance the oil-water separation ability via superhydrophobic treatment. Wood sponge prepared using various experimental methods and different natural woods exhibits distinctive properties in regards to robustness, compressibility, fatigue resistance, and oil absorption ability. As an aerogel material, wood sponge offers multi-action (absorption, filtration) and reusable oil-water separation functions. This paper introduces the advantages of the use of wood sponge for oil-water separation. The physical and chemical properties of wood sponge and its mechanism of adsorbing crude oil are explained. The synthesis method and the properties are discussed. Finally, the use of wood sponge is summarized and prospected.

Ion-exchange resins improve the analysis of metal nanoparticles in wastewater using single-particle inductively coupled plasma-mass spectrometry.

Improved measurement and analysis technologies are needed for investigating nanoparticle generation characteristics in sewage treatment plants. Single-particle inductively coupled plasma-mass spectrometry (spICP-MS) can be used to analyze metal nanoparticle characteristics. However, during spICP-MS analysis of environmental samples, high concentrations of ionic materials obscure the signals of particulate materials by increasing background signals. This can increase the threshold value for separating background and particle signals and increase the background-equivalent diameter (BED). In this study, particle size distributions in influent and effluent collected from sewage treatment plants were investigated using an improved spICP-MS method combining spICP-MS with ion-exchange resin (IER) column pretreatment. The ion removal effect of the IER column was first examined using a synthetic mixture of Ag nanoparticles (AgNPs) and ions. The method was then applied to wastewater from six different sewage treatment plants using an optimal IER packing of 5 g. The ion removal efficiency for samples containing a proper mixture of AgNPs and Ag ions was 99.98%, and the BED significantly decreased from 73.0 ± 1.0 to 6.1 ± 0.3 nm. Particle size distributions measured in the treatment plant influent and effluent ranged from 28.5 nm (Co) to 220.3 nm (Mg) and from 26.8 nm (Co) to 291.8 nm (Mg), respectively. spICP-MS/IER enabled the detection of smaller particles by removing ions from the sample and significantly decreasing the size detection limit. The results of this study offer a reference for developing predictive models for removing metal nanoparticles during sewage/wastewater treatment.

Photocatalytic degradation of organophosphorus flame retardants in aqueous solutions: a review and future prospects.

The widespread use of organophosphorus flame retardants (OPFRs) in industrial and household products increases the risk of their environmental exposure, posing a serious threat to ecosystems and human health. Photocatalytic technology has been widely used in wastewater treatment due to its high efficiency, mild reaction conditions, and robustness. This review summarizes the current status of research on photocatalytic degradation of OPFRs, focusing on the effect of different types of catalysts on the degradation efficiency, the effects of pH, and co-existing inorganic and organic ions. And pH and co-existing inorganic mainly affect the active oxygen and the active surface sites of the catalyst. In addition, toxicological calculations of the intermediates of the degradation pathway using T.E.S.T. and ECOSAR showed that photocatalysis could effectively reduce the toxicity of OPFRs. Development of new photocatalytic materials, in-depth study of the degradation mechanism of different catalysts and flame retardants, and attention to practical applications and toxicity issues can be the development direction of future research.

Effects of aeration control strategies on nitrous oxide emissions in alternating anoxic-oxic sequencing batch reactor systems.

Reducing N2O emissions is key to controlling greenhouse gases (GHG) in wastewater treatment plants (WWTPs). Although studies have examined the effects of dissolved oxygen (DO) on N2O emissions during nitrogen removal, the precise effects of aeration rate remain unclear. This study aimed to fill this research gap by investigating the influence of dynamic aeration rates on N2O emissions in an alternating anoxic-oxic sequencing batch reactor system. The emergence of DO breakthrough points indicated that the conversion of ammonia nitrogen to nitrite and the release of N2O were nearly complete. Approximately 91.73 ± 3.35% of N2O was released between the start of aeration and the DO breakthrough point. Compared to a fixed aeration rate, dynamically adjusting the aeration rates could reduce N2O production by up to 48.6%. Structural equation modeling revealed that aeration rate and total nitrogen directly or indirectly had significant effects on the N2O production. A novel regression model was developed to estimate N2O production based on energy consumption (aeration flux), water quality (total nitrogen), and GHG emissions (N2O). This study emphasizes the potential of optimizing aeration strategies in WWTPs to significantly reduce GHG and improve environmental sustainability.

Distinct comammox Nitrospira in high-rate down-flow hanging sponge reactor treating municipal wastewater.

A down-flow hanging sponge (DHS) reactor is a trickling filter system used for wastewater treatment, which employs sponges to retain biomass. This study assessed the process performance of a compact DHS combined with a sedimentation tank with seven phases at varying hydraulic retention times (HRT) over 500 days. The BOD of the DHS effluent was maintained at 4.0 ± 0.5 mg·L-1 for the shortest HRT 0.3 ± 0.1 h. The nitrification efficiency was considerably impacted by the reduced HRT, with NH4+-N and NO3--N concentrations of 9.0 ± 1.2 mgN·L-1 and 2.2 ± 0.5 mgN·L-1, respectively. Nevertheless, the effluent complied with effluent discharge standards throughout the trial period. The number of comammox 16S rRNA gene copies ranged from 5.58 to 13.2 × 107 copies·mL-1, indicating that sponges biomass retained carrier can provide favorable conditions for comammox growth and could contribute to nitrification in the high-rate DHS reactor.

[Whole Process Analysis and Fate Behavior of Microplastics in Urban Wastewater Treatment Plants, Including their Occurrence Forms, Components, and Removal Efficiency].

Microplastics are among the most difficult new pollutants to remove in wastewater treatment plants. In order to explore the occurrence form, size distribution, composition, removal efficiency, migration law, and fate behavior characteristics of microplastic particles in sewage plants, taking a sewage treatment plant in Hohhot as an example, a total of 17 sampling sites were set up. The LAS X software counted the shape, abundance, and size of microplastics and conducted a full-process analysis. The results showed that： fibrous microplastics had the highest abundance and widest distribution and were the main form of existence, accounting for 61.8% of the total abundance； the size of microplastics ranged mainly between 0 and 1.00 mm, and among the four sizes, the abundance of microplastics 0.25 to 0.50 mm in China was the highest, accounting for 32.9%. Among the eight types of plastic components detected, polyester substances （PET, PBT）, cellulose, and polypropylene （PP） were the main components, accounting for 25%, 21%, and 17%, respectively. The influent abundance of the sewage plant was （73 ±5） n·L-1, the effluent abundance was （14 ±2） n·L-1, and the overall removal rate was （80.8 ±12.1）%. Among the three treatment stages of the sewage plant, only the primary treatment played a role in removal, and the abundance of microplastics surged in the secondary treatment. Different structures playing a major role in the removal of microplastics were fine grids （49.2 ±7.4）% and secondary sedimentation tanks （92.4 ±13.9）%. Microplastics mainly existed in the form of fibers, fragments, and films. The proportion of fibers was approximately 70%, and the size of fragments was mainly concentrated between 0.50 and 5.00 mm. Most fragments were in the range of 5.00 mm, accounting for 50%, making them the main form apart from fibrous. The film-like size was mostly concentrated in the range of less than 0.50 mm, accounting for more than 10%. Therefore, improving the removal of small-sized fibrous and film-like microplastics and large-sized fragmented microplastic particles can effectively reduce the pollution risk of microplastics in the environment caused by sewage plant drainage.

Study on the performance of biochar prepared from walnut shell and traditional graphene electrode plate in the treatment of domestic sewage in microbial fuel cells.

As a new pollutant treatment technology, microbial fuel cell (MFC) has a broad prospect. In this article, the devices assembled using walnut shells are named biochar-microbial fuel cell (B-MFC), and the devices assembled using graphene are named graphene-microbial fuel cell (G-MFC). Under the condition of an external resistance of 1,000 Ω, the B-MFC with biochar as the electrode plate can generate a voltage of up to 75.26 mV. The maximum power density is 76.61 mW/m2, and the total internal resistance is 3,117.09 Ω. The removal efficiency of B-MFC for ammonia nitrogen (NH3-N), chemical oxygen demand (COD), total nitrogen (TN), and total phosphorus (TP) was higher than that of G-MFC. The results of microbial analysis showed that there was more operational taxonomic unit (OTU) on the walnut shell biochar electrode plate. The final analysis of the two electrode materials using BET specific surface area testing method (BET) and scanning electron microscope (SEM) showed that the pore size of walnut shell biochar was smaller, the specific surface area was larger, and the pore distribution was smoother. The results show that using walnut shells to make electrode plates is an optional waste recycling method and an electrode plate with excellent development prospects.

Water quality assessment of Bheemasandra Lake, South India: A blend of water quality indices, multivariate data mining techniques, and GIS.

An integrated approach combining water quality indices (WQIs), multivariate data mining, and geographic information system (GIS) was employed to examine the water quality of Bheemasandra Lake, located adjacent to a sewage treatment plant (STP) in Tumakuru city, India. The analysis of 22 lake water samples, examined before and after the monsoons, revealed that the physicochemical parameters namely - electrical conductivity, biochemical oxygen demand, turbidity, total dissolved solids, ammoniacal nitrogen, nitrates, phosphates, magnesium, total hardness, total alkalinity, and calcium - exceeded the acceptable limits stipulated by national and international standards. The Canadian Council of Ministers of the Environment WQI (pre-monsoon: 25.3; post-monsoon: 33.9) and weighted arithmetic WQI (pre-monsoon: 3398; post-monsoon: 2093) designated the water as unsafe for drinking. Irrigation WQIs (sodium adsorption ratio, sodium percentage, residual sodium carbonate, magnesium hazard, permeability index, and potential salinity) implied water's suitability for irrigation. However, electrical conductivity indicated otherwise. Industrial WQIs (Larson-Skold Index, Langelier Index, Aggressive Index, and Puckorius Scaling Index) illustrated scaling propensity and the chloride sulfate mass ratio alluded galvanic corrosion potential. Hierarchical cluster analysis gathered 22 sampling points into two clusters (cluster 1: relatively lower polluted regions; cluster 2: highly polluted regions) for each season based on similarities in water features. Principal component analysis extracted four (79.07% cumulative variance) and six (87.14% cumulative variance) principal components before and after the monsoons, respectively. These components identified the primary pollution sources as urban sewage and natural lithological processes. WQI maps, created using the inverse distance weighted interpolation technique, enhanced the visualization of spatial-temporal variations. This study highlights the dire consequences of urbanization, STP pollution, and sewage management failures, necessitating that concerned authorities should implement policies and measures to curb the negative impacts on the environment and public health.

Insights into the Origin of Activity Enhancement via Tuning Electronic Structure of Cu2O towards Electrocatalytic Ammonia Synthesis.

The insight of the activity phase and reaction mechanism is vital for developing high-performance ammonia synthesis electrocatalysts. In this study, the origin of the electronic-dependent activity for the model Cu2O catalyst toward ammonia electrosynthesis with nitrate was probed. The modulation of the electronic state and oxygen vacancy content of Cu2O was realized by doping with halogen elements (Cl, Br, I). The electrocatalytic experiments showed that the activity of the ammonia production depends strongly on the electronic states in Cu2O. With increased electronic state defects in Cu2O, the ammonia synthesis performance increased first and then decreased. The Cu2O/Br with electronic defects in the middle showed the highest ammonia yield of 11.4 g h-1 g-1 at -1.0 V (vs. RHE), indicating that the pattern of change in optimal ammonia activity is consistent with the phenomenon of volcano curves in reaction chemistry. This work highlights a promising route for designing NO3-RR to NH3 catalysts.

Distinguished denitrifying phosphorus removal in the high-rate anoxic/microaerobic system for sewage treatment.

This study re-evaluated the role of anoxic and anaerobic zones during the enhanced biological phosphorus (P) removal process by investigating the potential effect of introducing an anoxic zone into a high-rate microaerobic activated sludge (MAS) system (1.60-1.70 kg chemical oxygen demand (COD) m-3 d-1), i.e., a high-rate anoxic/microaerobic (A/M) system for sewage treatment. In the absence of a pre-anaerobic zone, introducing an anoxic zone considerably reduced effluent NOx--N concentrations (7.2 vs. 1.5 mg L-1) and remarkably enhanced total nitrogen (75% vs. 89%) and total P (18% vs. 60%) removal and sludge P content (1.48% vs. 1.77% (dry weight)) due to further anoxic denitrifying P removal in the anoxic zone (besides simultaneous nitrification and denitrification in the microaerobic zone). High-throughput pyrosequencing demonstrated the niche differentiation of different polyphosphate accumulating organism (PAO) clades (including denitrifying PAO [DPAO] and non-DPAO) in both systems. Introducing an anoxic zone considerably reduced the total PAO abundance in sludge samples by 42% and modified the PAO community structure, including 17-19 detected genera. The change was solely confined to non-DPAOs, as no obvious change in total abundance or community structure of DPAOs including 7 detected genera was observed. Additionally, introducing an anoxic zone increased the abundance of ammonia-oxidizing bacteria by 39%. The high-rate A/M process provided less aeration, higher treatment capacity, a lower COD requirement, and a 75% decrease in the production of waste sludge than the conventional biological nutrient removal process.

A Wooden Carbon-Based Photocatalyst for Water Treatment.

Due to a large number of harmful chemicals flowing into the water source in production and life, the water quality deteriorates, and the use value of water is reduced or lost. Biochar has a strong physical adsorption effect, but it can only separate pollutants from water and cannot eliminate pollutants fundamentally. Photocatalytic degradation technology using photocatalysts uses chemical methods to degrade or mineralize organic pollutants, but it is difficult to recover and reuse. Woody biomass has the advantages of huge reserves, convenient access and a low price. Processing woody biomass into biochar and then combining it with photocatalysts has played a complementary role. In this paper, the shortcomings of a photocatalyst and biochar in water treatment are introduced, respectively, and the advantages of a woody biochar-based photocatalyst made by combining them are summarized. The preparation and assembly methods of the woody biochar-based photocatalyst starting from the preparation of biochar are listed, and the water treatment efficiency of the woody biochar-based photocatalyst using different photocatalysts is listed. Finally, the future development of the woody biochar-based photocatalyst is summarized and prospected.

Biological feasibility of discharge a local WTTP sludge to sewer network and centralized WWTP; a case study: Tehran, Iran.

Over the recent years, ever-increasing population growth and higher wastewater production has been a challenge for decentralized wastewater treatment plants (WWTPs). In addition, sludge treatment due to high cost for equipment and place make authorities to find a sustainable approach in both of economical and technical perspectives. One of the proposed solutions is transferring the sludge produced from decentralized WWTP to centralized WWTP. However, the appropriate proportional ratio of raw sludge to raw sewage is a challenge, otherwise, it make anaerobic conditions and sewage rotting along the sewer network based on permissible limit of dihydrogen sulfide (H2S) gas (5 ppm). In the present study, seven reactors with different ratios of sludge to raw sewage (0, 15, 20, 25, 50, 75, 100) were used to stimulate the feasibility of transferring Shahrake Gharb WWTP sludge along the wastewater transfer pipe to the centralized sewage treatment south Tehran WWTP plant in Tehran, Iran. The septic situation and H2S emission of different reactors within 7 h (Time to reach the compound in the south treatment plant) was analyzed by gas meter. The results indicated that the optimum ratio of sludge to raw sewage was 15% without H2S production during 7 h. In addition, due to the high volume of sludge produced by the Shahrake Gharb WWTP, the optimal ratio of lime to total solids (TS) in sludge (gr/gr) (0.6) increased the sludge loading rate from 15 to 30% without any H2S emission during the stimulation study period. Therefore, the lime stabilization and transfer of sludge from a decentralized WWTP to a centralized WWTP is a feasible way to manage the sludge and enhance the treatment capacity in local WWTP.

A pilot-scale assessment of five common weeds in the sustainable treatment of sewage utilizing SHEFROL®, with prospects of a closed-loop biorefinery.

Relative efficacy of five common weeds-of the kind that are either rooted in soil or which freely float over water-was assessed in rapid, effective and sustainable treatment of sewage at pilot plant scale in the recently developed and patented SHEFROL® bioreactors. The plants were utilized in a unit of capacity 12,000 liters/day (LPD) which, after two years of use, was enlarged to handle 40,000 LPD of sewage. It was then further expanded after an year to treat 57,000 LPD. All the five weeds, of which none has previously been tested in a pilot-scale SHEFROL, were able to foster highly efficient primary treatment (in terms of suspended and total solids) and secondary treatment (in terms of BOD and COD) to levels exceeding 85% in most cases. Additionally, the weeds also helped in achieving significant tertiary treatment. At different hydraulic retention times, and at steady state, the five weeds achieved treatment of BOD, COD, suspended solids, nitrogen, phosphorous, copper, nickel, zinc, and manganese in the ranges, 80-95, 79-91, 82-95, 61-71, 51-73, 37-43, 30-38, 39-47, and 27-35%, respectively. It all occurred in a single process step and without the use of any machine or chemical. This made the system not only simple and inexpensive to install but also to maintain. Over continuous long-term operation for four years, the system was seen to be very robust as it was able to handle wide variations in the volumes and characteristics of sewage, as well as absorb shock loads without compromising the reactor performance. The sustainability of the system can be further enhanced by upgrading it to a circular biorefinery. Energy sources in the form of volatile fatty acids (VFAs) can be extracted from the weeds removed from SHEFROL and then the weeds can be converted into organic fertilizer using high-rate vermireactors recently developed by the authors.

A novel and inexpensive, yet very efficient sewage treatment system is presented.The versatility and robustness of the system has been assessed at pilot plant scale for several years.The long-term continuous studies establish the efficacy of five common weeds­not hitherto explored at pilot plant level­which can serve as the main bioagent(s) in the sewage treatment system.The system has the potential of being transformed in to a closed-loop-no-waste biorefinery.

Analyzing the effect of public private partnership mode on sewage treatment in China.

The public-private partnership (PPP) mode is one of the main ways to promote environmental governance through marketization in the sewage treatment industry. This mode is crucial for environmental protection and livelihood improvement. In order to investigate the impact of PPP mode on sewage treatment, the influence of financial development and the government-business relationship on the effectiveness of sewage treatment under PPP mode, and the role of government in this context, an empirical model is established. To achieve this, data from 284 prefecture-level and above cities in China from 2009 to 2017 has been selected as research samples. The total amount of regional sewage treatment PPP projects is used as the proxy variable for participation in the PPP mode. The findings reveal that the PPP mode of sewage treatment effectively reduces the intensity and amount of sewage discharge. Moreover, the results indicate that a higher level of financial development and a more perfect financial system are associated with better sewage treatment effects under the PPP mode. Similarly, a more harmonious government-business relationship and a higher health index of this relationship correspond to improved sewage treatment effects under the PPP mode. The government should actively enhance government transparency, formulate appropriate corporate taxes and fees, clarify the responsibilities and obligations of the government and enterprises, and optimize the business environment in order to optimize the sewage treatment effect of the PPP mode.

Novel adaptive activated sludge process leverages flow fluctuations for simultaneous nitrification and denitrification in rural sewage treatment.

The fluctuating characteristics of rural sewage flow pose a significant challenge for wastewater treatment plants, leading to poor effluent quality. This study establishes a novel adaptive activated sludge (AAS) process specifically designed to address this challenge. By dynamically adjusting to fluctuating water flow in situ, the AAS maintains system stability and promotes efficient pollutant removal. The core strategy of AAS leverages the inherent dissolved oxygen (DO) variations caused by flow fluctuations to establish an alternating anoxic-aerobic environment within the system. This alternating operation mode fosters the growth of aerobic denitrifiers, enabling the simultaneous nitrification and denitrification (SND) process. Over a 284-day operational period, the AAS achieved consistently high removal efficiencies, reaching 94 % for COD and 62.8 % for TN. Metagenomics sequencing revealed HN-AD bacteria as the dominant population, with the characteristic nap gene exhibiting a high relative abundance of 0.008 %, 0.010 %, 0.014 %, and 0.015 % in the anaerobic, anoxic, dynamic, and oxic zones, respectively. Overall, the AAS process demonstrates efficient pollutant removal and low-carbon treatment of rural sewage by transforming the disadvantage of flow fluctuation into an advantage for robust DO regulation. Thus, AAS offers a promising model for SND in rural sewage treatment.