Fabrication and Characterization of Dielectric ZnCr2O4 Nanopowders and Thin Films for Parallel-Plate Capacitor Applications.

We report here the successful shape-controlled synthesis of dielectric spinel-type ZnCr2O4 nanoparticles by using a simple sol-gel auto-combustion method followed by successive heat treatment steps of the resulting powders at temperatures from 500 to 900 °C and from 5 to 11 h, in air. A systematic study of the dependence of the morphology of the nanoparticles on the annealing time and temperature was performed by using field effect scanning electron microscopy (FE-SEM), powder X-ray diffraction (PXRD) and structure refinement by the Rietveld method, dynamic lattice analysis and broadband dielectric spectrometry, respectively. It was observed for the first time that when the aerobic post-synthesis heat treatment temperature increases progressively from 500 to 900 °C, the ZnCr2O4 nanoparticles: (i) increase in size from 10 to 350 nm and (ii) develop well-defined facets, changing their shape from shapeless to truncated octahedrons and eventually pseudo-octahedra. The samples were found to exhibit high dielectric constant values and low dielectric losses with the best dielectric performance characteristics displayed by the 350 nm pseudo-octahedral nanoparticles whose permittivity reaches a value of ε = 1500 and a dielectric loss tan δ = 5 × 10-4 at a frequency of 1 Hz. Nanoparticulate ZnCr2O4-based thin films with a thickness varying from 0.5 to 2 µm were fabricated by the drop-casting method and subsequently incorporated into planar capacitors whose dielectric performance was characterized. This study undoubtedly shows that the dielectric properties of nanostructured zinc chromite powders can be engineered by the rational control of their morphology upon the variation of the post-synthesis heat treatment process.

Lattice Mismatch-Induced Formation of Copper Nanoplates with Embedded Ultrasmall Platinum or Palladium Cores for Tunable Optical Properties.

Although noble metal nanocrystals have been studied extensively in the past decades, the shape-controlled synthesis of non-noble metal nanocrystals has remained challenging with limited success, which is a grand obstacle to their wide applications. Herein, a novel lattice mismatch-involved shape-control mechanism of Cu nanocrystals in a seed-mediated synthesis is reported, which can produce Cu nanoplates in high yield with tailored sizes (28-130 nm), holding great potential in optical and catalytic applications. The lattice mismatch between Cu and the seed is found effective in inducing crystallographic defects for symmetry breaking toward anisotropic nanocrystals. While a too-large lattice mismatch (11.7% for Au seeds) leads to multiple twin defects to form quasi-spherical Cu nanocrystals, an appropriately large lattice mismatch (7.7% for Pt and 6.9% for Pd seeds) successfully induces planar defects for the formation of Cu nanoplates. The size of the Cu nanoplates is customizable by controlling the concentration of the seeds, leading to tunable optical properties. A prototype of a colorimetric indicator with Cu nanoplates, potentially applicable to the safety control of foods and drugs is demonstrated. This mechanism paves a new way for the shape-controlled synthesis of Cu and other metal nanocrystals for a broad range of applications.

Electrochemical detection of carbendazim with mulberry fruit-like gold nanocrystal/multiple graphene aerogel and DNA cycle amplification.

An aptasensor for electrochemical detection of carbendazim is reported with mulberry fruit-like gold nanocrystal (MF-Au)/multiple graphene aerogel (MGA) and DNA cycle amplification. HAuCl4 was reduced by ascorbic acid in a CTAC solution containing KBr and KI and formed trioctahedron gold nanocrystal. The gold nanocrystal underwent structural evolution under enantioselective direction of L-cysteine. The resulting MF-Au shows a mulberry fruit-like nanostructure composed of gold nanocrystals of about 200 nm as the core and many irregular gold nanoparticles of about 30 nm as the shell. The exposure of high-index facets improves the catalytic activity of MF-Au. MF-Au/MGA was used for the construction of an aptasensor for electrochemical detection of carbendazim. The aptamer hybridizes with assistant strand DNA to form duplex DNA. Carbendazim binds with the formed duplex DNA to release assistant strand DNA, triggering one three-cascade DNA cycle. The utilization of a DNA cycle allows one carbendazim molecule to bring many methylene blue-labeled DNA fragments to the electrode surface. This promotes significant signal amplification due to the redox reaction of methylene blue. The detection signal is further enhanced by the catalysis of MF-Au and MGA towards the redox of methylene blue. A differential pulse voltammetric signal, best measured at - 0.32 V vs. Ag/AgCl, increases linearly with the carbendazim concentration ranging from 1.0 × 10-16 to 1.0 × 10-11 M with a detection limit of 4.4 × 10-17 M. The method provides ultrahigh sensitivity and selectivity and was successfully applied to the electrochemical detection of carbendazim in cucumber. This study reports on an ultrasensitive aptasensor for electrochemical detection of carbendazim in cucumber based on mulberry fruit-like gold nanocrystal-multiple graphene aerogel and DNA cycle double amplification.

Highly sensitive electrochemical detection of circulating tumor DNA in human blood based on urchin-like gold nanocrystal-multiple graphene aerogel and target DNA-induced recycling double amplification strategy.

Detection of circulating tumor DNA (ctDNA) is important approach to risk stratification and treatment response monitoring of cancer patients, but current method lacks of enough sensitivity and repeatability. The paper repors shape-controlled synthesis of gold nanocrystals via reduction of HAuCl4 with ascorbic acid. The synergy of CTAC, KBr, KI and L-glutathione creates urchin-like gold nanocrystals (U-Au) with more exposed high-index facets. Preparation of electrochemical sensing platform for ctDNA involves modification of U-Au-multiple graphene aerogel for target DNA-induced recycle amplification. DNA probe 1 (P1) with methylene blue (MB) hybridizes with DNA probe 2 with ferrocene (Fc) to form duplex DNA, which was attached to U-Au through Au-S bond. The ctDNA hybridizes with hairpin DNA 1 to open hairpin structure, triggering target DNA-induced recycle. Utilization of target DNA-induced recycling allows one target DNA to approach many MB probes to electrode surface and to leave many Fc probes from electrode surface, promoting significant signal amplification. The detection signal is enhanced by catalyzed redox of Fc and MB. Electrochemical response increases with ctDNA concentration from 0.1 to 1 × 106 fM with detection limit of 0.033 fM. The biosensor provides ultrahigh sensitivity, specificity and stability and was successfully applied in detection of ctDNA in human blood.

Shape-Controlled Dodecaborate Supramolecular Organic-Framework-Supported Ultrafine Trimetallic PtCoNi for Catalytic Hydrolysis of Ammonia Borane.

On the basis of the unique chaotropic supramolecular assembly of cucurbit[5]uril (CB5) and dodecahydro- closo-dodecaborate anion [ closo-B12H12]2-, we have developed an efficient and universal platform to fabricate shape-controlled dodecaborate-based supramolecular organic frameworks (BOFs) decorated with ultrafine monodispersed trimetallic alloys. Simply by regulating the molar ratio of CB5 and [ closo-B12H12]2-, a series of fascinating morphologies, such as flowerlike structures, nanorods, nanocubes, and nanosheets, were successfully constructed. These obtained BOFs were proved to be good substrate supports for in situ synthesis of trimetallic PtCoNi nanoalloys, where the final PtCoNi-BOFs materials were obtained efficiently as a precipitate from aqueous solutions, and showed excellent catalytic performance in ammonia borane hydrolysis with a high turnover frequency of 1490 molH2 molPt-1 min-1 and a low activation energy of 15.79 kJ mol-1.

Systematic control of α-Fe2O3 crystal growth direction for improved electrochemical performance of lithium-ion battery anodes.

α-Fe2O3 nanomaterials with an elongated nanorod morphology exhibiting superior electrochemical performance were obtained through hydrothermal synthesis assisted by diamine derivatives as shape-controlling agents (SCAs) for application as anodes in lithium-ion batteries (LIBs). The physicochemical characteristics were investigated via XRD and FESEM, revealing well-crystallized α-Fe2O3 with adjustable nanorod lengths between 240 and 400 nm and aspect ratios in the range from 2.6 to 5.7. The electrochemical performance was evaluated by cyclic voltammetry and charge-discharge measurements. A SCA test series, including ethylenediamine, 1,2-diaminopropane, 2,3-diaminobutane, and N-methylethylenediamine, was implemented in terms of the impact on the nanorod aspect ratio. Varied substituents on the vicinal diamine structure were examined towards an optimized reaction center in terms of electron density and steric hindrance. Possible interaction mechanisms of the diamine derivatives with ferric species and the correlation between the aspect ratio and electrochemical performance are discussed. Intermediate-sized α-Fe2O3 nanorods with length/aspect ratios of ≈240 nm/≈2.6 and ≈280 nm/≈3.0 were found to have excellent electrochemical characteristics with reversible discharge capacities of 1086 and 1072 mAh g-1 at 0.1 C after 50 cycles.

Oxygen Vacancies in Shape Controlled Cu2O/Reduced Graphene Oxide/In2O3 Hybrid for Promoted Photocatalytic Water Oxidation and Degradation of Environmental Pollutants.

A novel shape controlled Cu2O/reduced graphene oxide/In2O3 (Cu2O/RGO/In2O3) hybrid with abundant oxygen vacancies was prepared by a facile, surfactant-free method. The hybrid photocatalyst exhibits an increased photocatalytic activity in water oxidation and degradation of environmental pollutants (methylene blue and Cr6+ solutions) compared with pure In2O3 and Cu2O materials. The presence of oxygen vacancies in Cu2O/RGO/In2O3 and the formation of heterojunction between In2O3 and Cu2O induce extra diffusive electronic states above the valence band (VB) edge and reduce the band gap of the hybrid consequently. Besides, the increased activity of Cu2O/RGO/In2O3 hybrid is also attributed to the alignment of band edge, a process that is assisted by different Fermi levels between In2O3 and Cu2O, as well as the charge transfer and distribution onto the graphene sheets, which causes the downshift of VB of In2O3 and the significant increase in its oxidation potential. Additionally, a built-in electric field is generated on the interface of n-type In2O3 and p-type Cu2O, suppressing the recombination of photoinduced electron-hole pairs and allowing the photogenerated electrons and holes to participate in the reduction and oxidation reactions for oxidizing water molecules and pollutants more efficiently.

Cellulose Tailored Anatase TiO2 Nanospindles in Three-Dimensional Graphene Composites for High-Performance Supercapacitors.

The morphologies of transition metal oxides have decisive impact on the performance of their applications. Here, we report a new and facile strategy for in situ preparation of anatase TiO2 nanospindles in three-dimensional reduced graphene oxide (RGO) structure (3D TiO2@RGO) using cellulose as both an intermediate agent eliminating the negative effect of graphene oxide (GO) on the growth of TiO2 crystals and as a structure-directing agent for the shape-controlled synthesis of TiO2 crystals. High-resolution transmission electron microscopy and X-ray diffractometer analysis indicated that the spindle shape of TiO2 crystals was formed through the restriction of the growth of high energy {010} facets due to preferential adsorption of cellulose on these facets. Because of the 3D structure of the composite, the large aspect ratio of the TiO2 nanospindles, and the exposed high-energy {010} facets of the TiO2 crystals, the 3D TiO2@RGO(Ce 1.7) exhibited excellent capacitive performance as an electrode material for supercapacitors, with a high specific capacitance (ca. 397 F g(-1)), a high energy density (55.7 Wh kg(-1)), and a high power density (1327 W kg(-1)) on the basis of the masses of RGO and TiO2. These levels of capacitive performance far exceed those of previously reported TiO2-based composites.

Shape-Controlled Synthesis of NiCo2 O4 Microstructures and Their Application in Supercapacitors.

The shape-controlled synthesis of NiCo2 O4 microstructures through a facile hydrothermal method and subsequent calcinations was explored. By employing CoSO4 , NiSO4 , and urea as the starting reactants, flower-like NiCo2 O4 microstructures were obtained at 100 °C after 5 h without the assistance of any additive and subsequent calcination at 300 °C for 2 h; dumbbell-like NiCo2 O4 microstructures were prepared at 150 °C after 5 h in the presence of trisodium citrate and subsequent calcination at 300 °C for 2 h. The as-prepared NiCo2 O4 microstructures were characterized by X-ray powder diffraction, field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy, and (high-resolution) transmission electron microscopy. Both the flower-like and dumbbell-like NiCo2 O4 microstructures could be used as electrode materials for supercapacitors, and they exhibited excellent electrochemical performance, including high specific capacitance, good rate capability, and excellent long-term cycle stability. Simultaneously, the shape-dependent electrochemical properties of the product were investigated.

Shape-controlled synthesis of hybrid nanomaterials via three-dimensional hydrodynamic focusing.

Shape-controlled synthesis of nanomaterials through a simple, continuous, and low-cost method is essential to nanomaterials research toward practical applications. Hydrodynamic focusing, with its advantages of simplicity, low-cost, and precise control over reaction conditions, has been used for nanomaterial synthesis. While most studies have focused on improving the uniformity and size control, few have addressed the potential of tuning the shape of the synthesized nanomaterials. Here we demonstrate a facile method to synthesize hybrid materials by three-dimensional hydrodynamic focusing (3D-HF). While keeping the flow rates of the reagents constant and changing only the flow rate of the buffer solution, the molar ratio of two reactants (i.e., tetrathiafulvalene (TTF) and HAuCl4) within the reaction zone varies. The synthesized TTF-Au hybrid materials possess very different and predictable morphologies. The reaction conditions at different buffer flow rates are studied through computational simulation, and the formation mechanisms of different structures are discussed. This simple one-step method to achieve continuous shape-tunable synthesis highlights the potential of 3D-HF in nanomaterials research.