Sonochemical synthesis, optical properties and DFT studies on novel (N-arylamino)phenothiazinium dyes suitable for fluorescence cells imaging.

Novel (N-arylamino)phenothiazinium dyes containing meta-substituted-arylamine auxochrome units were successfully obtained by applying a sonochemical protocol designed for a more efficient energy usage in the preparation of methylene blue (MB) analogues. Single crystal X-ray diffraction analysis revealed the spatial arrangement in aggregated crystalline state of (N-(meta-bromoaryl)amino)phenothiazinium dye with minor variances induced by the nature of the halogenide counterion (iodide or chloride). The optical UV-vis properties of the novel (N-arylamino)phenothiazinium dyes were comparable to those of the parent MB, with the longest wavelength absorption maxima situated in the visible range (640-680 nm), large molar extinction coefficients (log ε = 4.5-5.1) and weak solvatochromism in polar solvents. Their fluorescence emission in solid state was evidenced by One Photon Excited Fluorescence Lifetime Imaging (OPE-FLIM) and Two Photon Excited Fluorescence Lifetime Imaging (TPE-FLIM) experiments. Theoretical calculations based on Time Dependent-Density Functional Theory (TD-DFT) at B3PW91 and CAM-B3LYP/def2-SV(P) level of theory predicted absorption and fluorescence emission wavelength maxima in reasonable agreement with experimental data. Computational results suggest that the electronic excitations imply a departure from the planar molecular ground state towards geometrically rearranged excited states disfavoring the vibronic couplings due to a high degree of flexibility induced by the conformational motion of the N-arylamino auxochromes. Preliminary studies regarding the dyes' relevance in biological environment indicated lipophilicity (log P octanol/water 0.5-2.3), no aggregation tendency in diluted solutions in the concentration range 10-50 microM and ability for cytoplasmatic staining of D407 human retinal pigment epithelial cells.

Harnessing ultrasound-derived hydroxyl radicals for the selective oxidation of aldehyde functions.

Ultrasonic irradiation holds potential for the selective oxidation of non-volatile organic substrates in the aqueous phase by harnessing hydroxyl radicals as chemical initiators. Here, a mechanistic description of hydroxyl radical-initiated glyoxal oxidation is constructed by gleaning insights from photolysis and radiation chemistry to explain the yields and kinetic trends for oxidation products. The mechanistic description and kinetic measurements reported herein reveal that increasing the formation rate of hydroxyl radicals by changing the ultrasound frequency increases both the rates of glyoxal consumption and the selectivity towards C2 acid products over those from C-C cleavage. Glyoxal consumption also occurs more rapidly and with greater selectivity towards C2 acids under acidic conditions, which favor the protonation of carboxylate intermediates into their less reactive acidic forms. Leveraging such pH and frequency effects is crucial to mitigating product degradation by secondary reactions with hydroxyl radicals and oxidation products (specifically hydrogen peroxide and superoxide). These findings demonstrate the potential of ultrasound as a driver for the selective oxidation of aldehyde functions to carboxylic acids, offering a sustainable route for valorizing biomass-derived platform molecules.

An Overview of the Sustainable Depolymerization/Degradation of Polypropylene Microplastics by Advanced Oxidation Technologies.

Plastics have become indispensable in modern society; however, the proliferation of their waste has become a problem that can no longer be ignored as most plastics are not biodegradable. Depolymerization/degradation through sustainable processes in the context of the circular economy are urgent issues. The presence of multiple types of plastic materials makes it necessary to study the specific characteristics of each material. This mini-review aims to provide an overview of technological approaches and their performance for the depolymerization and/or degradation of one of the most widespread plastic materials, polypropylene (PP). The state of the art is presented, describing the most relevant technologies focusing on advanced oxidation technologies (AOT) and the results obtained so far for some of the approaches, such as ozonation, sonochemistry, or photocatalysis, with the final aim of making more sustainable the PP depolymerization/degradation process.

Mechanically Controlled Radical Polymerization: From Harsh to Mild.

Mechanochemistry constitutes a burgeoning field that investigates the chemical and physicochemical alterations of substances under mechanical force. It enables the synthesis of materials which was challenging to access via conventional thermal, optical, and electrical activation methods. In addition, it diminishes reliance on organic solvents and provides a novel route for green chemistry. Today, as a distinct branch alongside electrochemistry, photochemistry, and thermochemistry, mechanochemistry has emerged as an intersected research field with chemistry and material science. In recent years, the combination of mechanochemistry with controlled radical polymerization has witnessed rapid advancement, providing new sights to polymer science. The mechanochemically controlled radical polymerization (mechano-CRP) not only facilitate the synthesis of polymers with high molecular weight but also enable precise control over polymer chain length and structure. To diminish the side reactions by the strong mechanical force, transitioning from harsh to mild conditions in mechanochemical routes has been recognized as one of the primary advancements. From this perspective, we introduce the progress of mechanochemistry in controlled radical polymerization in recent years, aim to clarify the development trend of this research direction and stimulate senior researchers or newcomers to contemplate the future direction of this field.

Mussel-Inspired Sonochemical Nanocomposite Coating on Catheters for Prevention of Urinary Infections.

Catheter-associated urinary tract infections are the most common hospital-acquired infections and cause patient discomfort, increased morbidity, and prolonged stays, altogether posing a huge burden on healthcare services. Colonization occurs upon insertion, or later by ascending microbes from the rich periurethral flora, and is therefore virtually unavoidable by medical procedures. Importantly, the dwell time is a significant risk factor for bacteriuria because it gives biofilms time to develop and mature. This is why we engineer antibacterial and antibiofilm coating through ultrasound- and nanoparticle-assisted self-assembly on silicone surfaces and validate it thoroughly in vitro and in vivo. To this end, we combine bimetallic silver/gold nanoparticles, which exercise both biocidal and structural roles, with dopamine-modified gelatin in a facile and substrate-independent sonochemical coating process. The latter mussel-inspired bioadhesive potentiates the activity and durability of the coating while attenuating the intrinsic toxicity of silver. As a result, our approach effectively reduces biofilm formation in a hydrodynamic model of the human bladder and prevents bacteriuria in catheterized rabbits during a week of placement, outperforming conventional silicone catheters. These results substantiate the practical use of nanoparticle-biopolymer composites in combination with ultrasound for the antimicrobial functionalization of indwelling medical devices.

Investigations on cavitation flow and vorticity transport in a jet pump cavitation reactor with variable area ratios.

Hydrodynamic cavitation (HC) has emerged as a promising technology for water disinfection. Interestingly, when subjected to specific cavitation pressures, jet pump cavitation reactors (JPCRs) exhibit effective water treatment capabilities. This study investigated the cavitation flow and vorticty transport in a JPCR with various area ratios by utilizing computational fluid dynamics. The results reveal that cavitation is more likely to occur within the JPCR as the area ratio becomes smaller. While as the area ratio decreases, the limit flow ratio also decreases, leading to a reduced operational range for the JPCR. During the cavitation inception stage, only a few bubbles with limited travel distances are generated at the throat inlet. A stable cavitation layer developed between the throat and downstream wall during the limited cavitation stage. In this phase, the primary flow carried the bubbles towards the outlet. In addition, it was found that the vortex stretching, compression expansion, and baroclinic torque terms primarily influence the vorticity transport equation in this context. This work may provide a reference value to the design of JPCRs for water treatment.

Green synthesis of 1,3,5-triazine derivatives using a sonochemical protocol.

1,3,5-triazine derivatives are useful compounds with potential applications in various branches of chemical industry, including pharmaceutical chemistry, cosmetic chemistry, photochemistry, and organic chemistry. Due to the growing environmental requirements on conducting efficient, economical, and safe syntheses, development of new methods for synthesizing organic compounds is highly desirable. In this publication, we present a protocol for the synthesis of 1,3,5-triazine derivatives using a sonochemical approach. In as little as 5 min, it is possible to obtain most of the investigated compounds with a yield of over 75%. An undeniable advantage of this method, besides its short time, is the use of water as the solvent. Furthermore, we provide examples that the sonochemical method may be more versatile than the competing microwave method. Analysis conducted using the DOZNTM 2.0 tool revealed that in terms of the 12 principles of green chemistry, the developed sonochemical method is 13 times "greener" than the classical one. Additionally, it has been demonstrated that the investigated molecules are attractive for their application as drug-like compounds.

Ultrasonic reactor set-ups and applications: A review.

Sonochemistry contributes to green science as it uses less hazardous solvents and methods to carry out a reaction. In this review, different reactor designs are discussed in detail providing the necessary knowledge for implementing various processes. The main characteristics of ultrasonic batch systems are their low cost and enhanced mixing; however, they still have immense drawbacks such as their scalability. Continuous flow reactors offer enhanced production yields as the limited cognition which governs the design of these sonoreactors, renders them unusable in industry. In addition, microstructured sonoreactors show improved heat and mass transfer phenomena due to their small size but suffer though from clogging. The optimisation of various conditions of regulations, such as temperature, frequency of ultrasound, intensity of irradiation, sonication time, pressure amplitude and reactor design, it is also discussed to maximise the production rates and yields of reactions taking place in sonoreactors. The optimisation of operating parameters and the selection of the reactor system must be considered to each application's requirements. A plethora of different applications that ultrasound waves can be implemented are in the biochemical and petrochemical engineering, the chemical synthesis of materials, the crystallisation of organic and inorganic substances, the wastewater treatment, the extraction processes and in medicine. Sonochemistry must overcome challenges that consider the scalability of processes and its embodiment into commercial applications, through extensive studies for understanding the designs and the development of computational tools to implement timesaving and efficient theoretical studies.

Antimicrobial Properties of Carboxymethyl Cellulose/Starch/N'N Methylenebisacrylamide Membranes Endowed by Ultrasound and Their Potential Application in Antimicrobial Packaging.

Cellulose is used widely in antimicrobial packaging due to its abundance in nature, biodegradability, renewability, non-toxicity, and low cost. However, how efficiently and rapidly it imparts high antimicrobial activity to cellulose-based packaging materials remains a challenge. In this work, Ag NPs were deposited on the surface of carboxymethyl cellulose/starch/N'N Methylenebisacrylamide film using ultrasonic radiation. Morphology and structure analysis of as-prepared films were conducted, and the antibacterial effects under different ultrasonic times and reductant contents were investigated. These results showed that Ag NPs were distributed uniformly on the film surface under an ultrasonic time of 45 min. The size of Ag NPs changes as the reducing agent content decreases. The composite film demonstrated a slightly better antibacterial effect against E. coli than against S. aureus. Therefore, this work can provide valuable insights for the research on antimicrobial packaging.

Ultrasound-Controlled Prodrug Activation: Emerging Strategies in Polymer Mechanochemistry and Sonodynamic Therapy.

Ultrasound has gained prominence in biomedical applications due to its noninvasive nature and ability to penetrate deep tissue with spatial and temporal resolution. The burgeoning field of ultrasound-responsive prodrug systems exploits the mechanical and chemical effects of ultrasonication for the controlled activation of prodrugs. In polymer mechanochemistry, materials scientists exploit the sonomechanical effect of acoustic cavitation to mechanochemically activate force-sensitive prodrugs. On the other hand, researchers in the field of sonodynamic therapy adopt fundamentally distinct methodologies, utilizing the sonochemical effect (e.g., generation of reactive oxygen species) of ultrasound in the presence of sonosensitizers to induce chemical transformations that activate prodrugs. This cross-disciplinary review comprehensively examines these two divergent yet interrelated approaches, both of which originated from acoustic cavitation. It highlights molecular and materials design strategies and potential applications in diverse therapeutic contexts, from chemotherapy to immunotherapy and gene therapy methods, and discusses future directions in this rapidly advancing domain.

Review on the impacts of external pressure on sonochemistry.

The impact of hydrostatic pressure, commonly known as ambient or external pressure, on the phenomenon of sonochemistry and/or sonoluminescence has been extensively investigated through a multitude of experimental and computational studies, all of which have emphasized the crucial role played by this particular parameter. Numerous previous studies have successfully demonstrated the existence of an optimal static pressure for the occurrence of sonoluminescence and multi-bubble or single-bubble sonochemistry. However, despite these findings, a universally accepted value for this critical pressure has not yet been established. In addition, it has been found that the cavitation effect is completely inhibited when the static pressure is either too high or too low. This comprehensive review aims to delve into the primary experimental results and elucidate their significance in relation to hydrostatic pressure. We will then conduct an analysis of numerical calculations, focusing specifically on the influence of external pressure on single bubble sonochemistry. By delving into these calculations, we will be able to gain a deeper understanding of the experimental results and effectively interpret their implications.

Novel enhanced defluorination of perfluorooctanoic acids by biochar-assisted ultrasound coupling ferrate: Performance and mechanism.

An ultrasound (US)/biochar (BC)/ferrate (Fe (VI)) system was firstly proposed to enhance perfluorooctanoic acid (PFOA) defluorination. It achieved 93 % defluorination optimally, higher than the sum of 77 % (28 % and 49 % for US/BC and US/Fe (VI) respectively), implying synergistic effect. Besides, the mechanism study confirmed that, this system can not only increase the specific surface area of BC and the generation of reactive oxidant species (ROS), enriching the active sites and forming new oxygen-containing functional groups, but also promote the formation of intermediate iron species. The PFOA degradation in the US/BC/Fe (VI) was probably an adsorption-degradation process, both ROS and electron transfer promoted the defluorination. Additionally, its sustainability was also demonstrated with 14 % reduced defluorination percentage after five cycles of BC. Overall, the synergistic effect of the US/BC/Fe (VI) and its enhancing mechanism for PFOA defluorination were clarified firstly, which contributes to the development of biochar for assisting polyfluoroalkyl substances degradation.

Miniaturized therapeutic systems for ultrasound-modulated drug delivery to the central and peripheral nervous system.

Ultrasound is a promising technology to address challenges in drug delivery, including limited drug penetration across physiological barriers and ineffective targeting. Here we provide an overview of the significant advances made in recent years in overcoming technical and pharmacological barriers using ultrasound-assisted drug delivery to the central and peripheral nervous system. We commence by exploring the fundamental principles of ultrasound physics and its interaction with tissue. The mechanisms of ultrasonic-enhanced drug delivery are examined, as well as the relevant tissue barriers. We highlight drug transport through such tissue barriers utilizing insonation alone, in combination with ultrasound contrast agents (e.g., microbubbles), and through innovative particulate drug delivery systems. Furthermore, we review advances in systems and devices for providing therapeutic ultrasound, as their practicality and accessibility are crucial for clinical application.

Sonochemical synthesis of SnS and SnS2 quantum dots from aqueous solutions, and their photo- and sonocatalytic activity.

Our study reports the ultrasound-assisted synthesis of SnS and SnS2 in the form of nanoparticles using aqueous solutions of respective tin chloride and thioacetamide varying sonication time. The presence of both compounds is confirmed by powder X-ray diffraction, energy-dispersive X-ray spectroscopy, as well as Raman and FT-IR spectroscopic techniques. The existence of nanoparticles is proven by powder X-ray diffraction investigation and by high resolution transmission electron microscopy observations. The size of nanocrystallites are in the range of 3-8 nm and 30 50 nm for SnS, and 1.5-10 nm for SnS2. X-ray photoelectron spectroscopy measurements, used to investigate the chemical state of tin and sulphur atoms on the surface of nanoparticles, reveal that they are typically covered with tin on the same oxidation degree as respective bulk compound. Values of optical bandgaps of synthesized nanoparticles, according to the Tauc method, were 2.31, 1.47 and 1.05 eV for SnS (60, 90 and 120 min long synthesis, respectively), and 2.81, 2.78 and 2.70 eV for SnS2 (60, 90 and 120 min long synthesis, respectively). Obtained nanoparticles were utilized as photo- and sonocatalysts in the process of degradation of model azo-dye molecules by UV-C light or ultrasound. Quantum dots of SnS2 obtained under sonication lasting 120 min were the best photocatalyst (66.9 % color removal), while quantum dots of SnS obtained under similar sonication time were the best sonocatalyst (85.2 % color removal).

Ultrasound Induces Local Disorder of FeOOH on CdIn2S4 Photoanode for High Efficiency Photoelectrochemical Water Oxidation.

The regulation of the crystal structure of oxygen evolution cocatalyst (OEC) is a promising strategy for enhancing the photoelectrochemical efficiency of photoanodes. However, the prevailing regulating approach typically requires a multistep procedure, presenting a significant challenge for maintaining the structural integrity and performance of the photoanode. Herein, FeOOH with a local disordered structure is directly grown on a CdIn2S4 (CIS) photoanode via a simple and mild sonochemical approach. By modulating the localized supersaturation of Ni ions, ultrasonic cavitation induces Ni ions to participate in the nucleation and growth of FeOOH clusters to cause local disorder of FeOOH. Consequently, the local disordered FeOOH facilitates the exposure of additional active sites, boosting OER kinetics and extending charge carrier lifetimes. Finally, the optimal photoanode reaches 4.52 mA cm-2 at 1.23 VRHE, and the onset potential shifts negatively by 330 mV, exhibiting excellent performance compared with that of other metal sulfide-based photoelectrodes reported thus far. This work provides a mild and controllable sonochemical method for regulating the phase structure of OECs to construct high-performance photoanodes.

The Evolution of Sonochemistry: From the Beginnings to Novel Applications.

Sonochemistry is the use of ultrasonic waves in an aqueous medium, to generate acoustic cavitation. In this context, sonochemistry emerged as a focal point over the past few decades, starting as a manageable process such as a cleaning technique. Now, it is found in a wide range of applications across various chemical, physical, and biological processes, creating opportunities for analysis between these processes. Sonochemistry is a powerful and eco-friendly technique often called "green chemistry" for less energy use, toxic reagents, and residues generation. It is increasing the number of applications achieved through the ultrasonic irradiation (USI) method. Sonochemistry has been established as a sustainable and cost-effective alternative compared to traditional industrial methods. It promotes scientific and social well-being, offering non-destructive advantages, including rapid processes, improved process efficiency, enhanced product quality, and, in some cases, the retention of key product characteristics. This versatile technology has significantly contributed to the food industry, materials technology, environmental remediation, and biological research. This review is created with enthusiasm and focus on shedding light on the manifold applications of sonochemistry. It delves into this technique's evolution and current applications in cleaning, environmental remediation, microfluidic, biological, and medical fields. The purpose is to show the physicochemical effects and characteristics of acoustic cavitation in different processes across various fields and to demonstrate the extending application reach of sonochemistry. Also to provide insights into the prospects of this versatile technique and demonstrating that sonochemistry is an adapting system able to generate more efficient products or processes.

Ultrasound and sonochemistry enhance education outcomes: From fundamentals and applied research to entrepreneurial potential.

With this manuscript we aim to initiate a discussion specific to educational actions around ultrasonics sonochemistry. The importance of these actions does not just derive from a mere pedagogical significance, but they can be an exceptional tool for illustrating various concepts in other disciplines, such as process intensification and microfluidics. Sonochemistry is currently a far-reaching discipline extending across different scales of applicability, from the fundamental physics of tiny bubbles and molecules, up to process plants. This review is part of a special issue in Ultrasonics Sonochemistry, where several scholars have shared their experiences and highlighted opportunities regarding ultrasound as an education tool. The main outcome of our work is that teaching and mentorship in sonochemistry are highly needed, with a balanced technical and scientific knowledge to foster skills and implement safe protocols. Applied research typically features the use of ultrasound as ancillary, to merely enhance a given process and often leading to poorly conceived experiments and misunderstanding of the actual effects. Thus, our scientific community must build a consistent culture and monitor reproducible practices to rigorously generate new knowledge on sonochemistry. These practices can be implemented in teaching sonochemistry in classrooms and research laboratories. We highlight ways to collectively provide a potentially better training for scientists, invigorating academic and industry-oriented careers. A salient benefit for education efforts is that sonochemistry-based projects can serve multidisciplinary training, potentially gathering students from different disciplines, such as physics, chemistry and bioengineering. Herein, we discuss challenges, opportunities, and future avenues to assist in designing courses and research programs based on sonochemistry. Additionally, we suggest simple experiments suitable for teaching basic physicochemical principles at the undergraduatelevel. We also provide arguments and recommendations oriented towards graduate and postdoctoral students, in academia or industry to be more entrepreneurial. We have identified that sonochemistry is consistently seen as a 'green' or sustainable tool, which particular appeal to process intensification approaches, including microfluidics and materials science. We conclude that a globally aligned pedagogical initiative and constantly updated educational tools will help to sustain a virtuous cycle in STEM and industrial applications of sonochemistry.

Towards scaling up the sonochemical synthesis of Pt-nanocatalysts.

Large scale production of electrocatalysts for electrochemical energy conversion devices such as proton exchange membrane fuel cells must be developed to reduce their cost. The current chemical reduction methods used for this synthesis suffer from problems with achieving similar particle properties such as particle size and catalytic activity when scaling up the volume or the precursor concentration. The continuous production of reducing agents through the sonochemical synthesis method could help maintain the reducing conditions (and also the particle properties) upon increasing the reactor volume. In this work we demonstrate that the reducing conditions of Pt-nanoparticles are indeed maintained when the reactor volume is increased from 200 mL to 800 mL. Similar particle sizes, 2.1(0.3) nm at 200 mL and 2.3(0.4) nm at 800 mL, and catalytic activities towards the oxygen reduction reaction (ORR) are maintained as well. The reducing conditions were assessed through TiOSO4 dosimetry, sonochemiluminesence imaging, acoustic power measurements, and Pt(II) reduction rate measurements. Cyclic voltammetry, CO-stripping, hydrogen evolution measurements, ORR measurements, and electron microscopy were used to evaluate the catalytic activity and particle size. The similar particle properties displayed from the two reactor volumes suggest that the sonochemical synthesis of Pt-nanoparticles is suitable for large scale production.

Recent advances of ultrasound applications in the oil and gas industry.

In the last two decades, ultrasound (US) technologies research has increasingly earned attention for applications in the oil and gas industry. Numerous laboratory and field research have proven ultrasonics as an efficient, sustainable and cost-effective technology for improving well productivity. This paper pursues the elaboration of a comprehensive review of the most recent research related to ultrasonic technologies for applications in the oil and gas industry. Statistical analysis of different functional categories and classification of the research publications were performed. Considering the research reviewed, there is a huge gap between numerical and field studies in comparison with the numerous laboratory studies, deeming it necessary to increase efforts on developing mathematical and numerical models and field-testing cases of the ultrasonic effect. A comprehensive review of the ultrasonic waves' mechanisms of action for enhanced oil recovery (EOR) and emulsification/demulsification was conducted. Despite the lack of consensus regarding the mechanisms, cavitation and thermal effects on wellbore fluid and formation rock have been widely accepted as two of the most influencing mechanisms. A compilation of the state-of-the-art research of numerical, laboratory and field studies in the last two decades was assembled. Most authors agreed that ultrasonics is a highly efficient method for EOR and emulsion treatment if the optimal conditions are identified and achieved. The development of screening criteria for the application of ultrasonic waves was recommended, as this technique and the same parameters should not be utilized for all reservoir types. Treatment with ultrasound waves has shown improvement of oil recovery efficiency rates of over 90% and viscosity reduction values over 80%. The most efficient results were observed when in combination with another conventional EOR method, where ultrasound boosts recovery efficiency. Potential new applications related to rock mechanics and additional research topics were also recommended.

Recent developments using malononitrile in ultrasound-assisted multicomponent synthesis of heterocycles.

Ultrasonic irradiation serves as a vigorous and environmentally sustainable approach for augmenting multicomponent reactions (MCRs), offering benefits such as thermal enhancement, agitation, and activation, among others. Malononitrile emerges as a versatile reagent in this context, participating in a myriad of MCRs to produce structurally diverse heterocyclic frameworks. This review encapsulates the critical role of malononitrile in the sonochemical multicomponent synthesis of these heterocyclic structures. The paper further delves into the biochemical and pharmacological implications of these heterocycles, elucidating their reaction mechanisms as well as delineating the method's scope and limitations. We furnish an overview of the merits and challenges inherent to this synthetic approach and offer insights for potential avenues in future research.