Surgical strategy in treatment of metopic synostosis in a single centre experience: technical note and quantitative analysis of the outcomes.

PURPOSE: Trigonocephaly is the most common craniosynostosis involving orbits. Although some degree of agreement has been reached regarding surgical timing and indications for treatment, there is no consensus regarding the ideal operative technique to guarantee an optimal morphological outcome. The purpose of this study is to describe both strategies and to compare morphological outcomes by means of morphological surface analysis obtained from three-dimensional (3D) stereophotogrammetry, with two different techniques. METHODS: We retrospectively investigated 43 patients with metopic synostosis surgically treated between 2004 and 2020. Two different techniques were applied, addressed as technique A and B. Ten patients undergone postoperative 3d stereophotogrammetry were enrolled, and cephalometric measurements were taken and compared to a cohort of unaffected patients matched by age and gender. RESULTS: Comparison of the groups demonstrated a hypercorrection of the metopic angle of the second technique, associated with a slightly lower correction of the interfrontoparietal diameter. The metopic angle showed to be significantly undercorrected with the first method. CONCLUSIONS: Alternated barrel staving technique appears to be a quick and satisfactory method in cranial remodelling for metopic synostosis. It guarantees an optimal aesthetic result in the first years after surgery.

Nasal Morphology in a Young Adult Middle-Eastern Population: A Stereophotogrammetric Analysis.

AIM: This study aimed to describe gender-specific three-dimensional morphology of the soft-tissue nose in Lebanese young adults and to explore the associations between nasal morphology with age and body mass index (BMI). MATERIALS AND METHODS: Three-dimensional photographs were captured for 176 young healthy Lebanese adults (75 males and 101 females) aged 18.1-37.68 years. Linear and angular nasal measurements were computed and compared between genders, in addition to other established norms. Associations with age and BMI were also assessed. RESULTS: All linear measurements were greater in males than in females, and only the nasolabial angle was significantly larger in females by 2.97 degrees on average. Most of the measurements were found to be larger than the Caucasian norms. A few significant correlations were found between the measurements and age or BMI. CONCLUSION: This study is the first to present the sex-specific norms for nasal morphology in the Lebanese population and highlights the presence of gender dimorphism in the majority of measurements. Additional studies are needed to validate our data and expand the associations with age and BMI. CLINICAL SIGNIFICANCE: The data offered in this study could help enhance the accuracy of facial reconstructive surgery and aid in personalized treatment planning for both medical and cosmetic nasal interventions. How to cite this article: Saadeh M, Shamseddine L, Fayyad-Kazan H, et al. Nasal Morphology in a Young Adult Middle-Eastern Population: A Stereophotogrammetric Analysis. J Contemp Dent Pract 2024;25(3):199-206.

Comparison of Anthropometric and Cephalometric Measurements Obtained by Stereophotogrammetry and 3D Computed Tomography of the Nose Before Septorhinoplasty.

INTRODUCTION: Computed tomography (CT) is normally used in evaluation of patients with esthetic and functional nasal deformities. Stereophotogrammetry (SPG) is a measurement device that is an alternative to CT and does not harm human health. In this single-center retrospective study, we aimed to evaluate measurements obtained with CT and SPG. METHODS: The measurements of 18 patients who applied to our clinic between January 2022 and August 2022 and planned for septorhinoplasty were performed on both 3D images obtained with paranasal sinus CT and SPG device (SLR type Vectra H1 system). Measurements included that dorsocolumellar length, columella-filtral length, nasal tip projection ratio (dorsocolumellar length/columella-filtral length), columella-labial angle, nasofrontal angle, tip deviation direction, tip deviation angle, tip deviation distance and dorsal nasal hump. RESULTS: Most of patients were male (61.1%). Mean age was 24.5 years. Only columella-labial angle measurements showed a low level of significant difference (p < 0.05). However, there was no significance difference in other measurements (p > 0.05). A significant strong correlation was observed between all Vectra and CT measurements (p = 0.000). CONCLUSION: SPG device can be applied quickly in polyclinic without giving radiation to patient. Measurements can be taken automatically using a software. Its use in postoperative period does not carry any risk. Disadvantage of SPG is lack of information about internal nasal passage. However, there is a strong correlation between measurements obtained from both measurement devices. Therefore, SPG can be considered as an alternative to CT imaging in operation planning. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Three-dimensional video recordings: Accuracy, reliability, clinical and research guidelines - Reliability assessment of a 4D camera.

OBJECTIVES: In addition to studying facial anatomy, stereophotogrammetry is an efficient diagnostic tool for assessing facial expressions through 3D video recordings. Current technology produces high-quality recordings but also generates extremely excessive data. Here, we compare various recording speeds for three standardized movements using the 3dMDface camera system, to assess its accuracy and reliability. MATERIALS AND METHODS: A linear and two circular movements were performed using a 3D-printed cube mounted on a robotic arm. All movements were recorded initially at 60 fps (frames/second) and then at 30 and 15 fps. Recording accuracy was tested with best-fit superimpositions of consecutive frames of the 3D cube and calculation of the Mean Absolute Distance (MAD). The reliability of the recordings were tested with evaluation of the inter- and intra-examiner error. RESULTS: The accuracy of movement recordings was excellent at all speeds (60, 30 and 15 fps), with variability in MAD values consistently being less than 1 mm. The reliability of the camera recordings was excellent at all recording speeds. CONCLUSIONS: This study demonstrated that 3D recordings of facial expressions can be performed at 30 or even at 15 fps without significant loss of information. This considerably reduces the amount of produced data facilitating further processing and analyses.

Periocular Asymmetry Index in Caucasian Populations Using Three-dimensional Photogrammetry Assessment.

OBJECTIVE: To quantitatively assess the periocular asymmetry and investigate its sex and age-related differences in a Caucasian population using three-dimensional (3D) stereophotogrammetry. METHOD: Standardized 3D photos of the periocular region of 301 Caucasians were taken using the VECTRA M3 3D Imaging System. Standardized landmarks were positioned, and data measurements in the periocular region were obtained from these images using VAM software and assessed using intraclass correlation coefficients (ICC) for reliability. Absolute differences and asymmetry index between the right and the left periocular region were calculated with a focus on gender and age-related differences. RESULT: Fissure height asymmetry was positively correlated with age (p < 0.01). Furthermore, reflex distance asymmetry was positively correlated with age in the elderly group (p < 0.05). Absolute differences of upper eyelid crease were 0.65 ± 0.79 mm for females and 0.90 ± 0.94 mm for males (p < 0.05). In the elderly group, the absolute differences of reflex distance were 0.664 ± 0.471 mm for males and 0.470 ± 0.408 mm for females (p < 0.05), while the absolute differences of fissure height were 0.619 ± 0.469 mm and 0.436 ± 0.372 mm, respectively (p < 0.05). All measurements had an inter-rater ICC and intra-rater ICC between 0.761 and 0.957. CONCLUSION: Periocular asymmetry is more prominent in older and male people. 3D photogrammetry is a reliable tool to detect periocular asymmetry and might provide an accurate and effective reference for periocular cosmetic, plastic, and reconstructive surgery in the clinical routine. LEVEL OF EVIDENCE I: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors. www.springer.com/00266 .

A novel approach for deoxycholic acid administration to treat submental fullness: A case report assessed by 3D stereophotogrammetry.

Background: While effective, DAc injections for submental fat (SMF) reduction carry risks, including vascular damage and skin necrosis when improperly administered. This study presents a novel approach to SMF reduction using blunt microcannulas for DAc injections, coupled with 3D stereophotogrammetry quantification (3D-SQ). Clinical presentation: A 47-year-old female with SMF underwent two DAc applications. 3D-SQ was performed before and after each treatment using a 3D-SQ system. The patient experienced a substantial total volume reduction of 14.81 mL in the submental area after two DAc applications. 3D-SQ analysis showed a gradual reduction in submental volume over time. Importantly, no serious adverse events were reported, with only minor pain and warmth at the treated site. The reduction of SMF through DAc injections involves adipocyte cell lysis, emphasizing the importance of proper injection technique to avoid adverse events. The use of blunt microcannulas offers a safer alternative, minimizing the risk of skin necrosis, ulceration, and intra-arterial injections. Additionally, cannulas reduce bruising due to their blunt design and fan technique, enhancing patient comfort and safety. Conclusion: This case report highlights the efficacy of a novel cannula approach for DAc SMF reduction, assessed by 3D-SQ. Blunt microcannulas may represent a safer option compared to hypodermic needles, reducing the likelihood of severe complications.

Three-dimensional analysis of posed smile in adults: A scoping review.

This scoping review investigated the evidence on the three-dimensional analysis of a posed smile in adults to discover any research gaps in this research area. Electronic searches of articles written in English were performed using the four databases of Embase, PubMed, Springer, and Web of Science with publications from 2010 to 2023. Reference lists were also manually searched to identify additional studies. The results showed that 13 cross-sectional descriptive studies from Asia, Europe, North and South America met our inclusion criteria. Studies mainly focused on linear and angle measurement for resting and smiling faces and landmark movement from resting to smiling. Most studies conducted analysis of smiles stratified by sex, ethnicity, smile type, dental occlusion, skeletal pattern, and age. Two studies compared smiling with the resting position and one study compared the attractive smiling group with the ordinary group. Our scoping review revealed the insufficiency of some measurement methods, such as those employing area, volume, and soft tissue thickness. Furthermore, few studies were conducted in Asian populations, and comparisons of various smile types, overjet types, horizontal skeletal patterns, and comparisons of smiles between people with untreated normal occlusion and those who had been orthodontically treated were lacking.

3D extraoral morphometric changes after implant surgery: an exploratory pilot study using stereophotogrammetry.

OBJECTIVE: This pilot study aimed to evaluate, for the first time, the changes in facial tissues following the placement of a single dental implant. METHOD AND MATERIALS: Patients were scanned with a 3D facial scanner (3dMD) before implant surgery, immediately after surgery (T1), at 7 days postoperatively (T2), and at the impression stage (T3). Acquired images were processed using the 3dMDvultus (3dMD) software program and volume differences and linear depth measurements were calculated to determine the morphometric changes over time. A total of 11 patients were included in the analyses. Descriptive statistics were employed to analyze the data. RESULTS: The volumetric changes and maximum depth differences indicated an initial increase, followed by a progressive decrease in tissue volume after implant placement in the area of the surgery. The volume change values ranged between 2.5 and 3.9 cm3 for T1, whereas for T2, the volume change decreased to a range of 0.8 to 1.8 cm3. Maximum depth differences ranged between 2.06 and 2.80 mm in the soft tissues immediately after the implant surgery and reduced to around 2.01 to 0.55 mm at the impression stage. The amount of painkiller used was not related to the magnitude of linear depth measurements at any assessed time point. CONCLUSION: There was a longitudinal decrease in soft tissue volume and depth difference in extraoral soft tissues in the region of implant placement after surgery up to 6 weeks. The use of a facial scanner is a promising noninvasive method to monitor 3D morphometric changes after implant surgery.

3D evaluation of cranial and dentofacial morphological differences between individuals with mouth breathing and nasal breathing.

INTRODUCTION: The present study aimed to identify the morphological differences in cranial and dentofacial structures between individuals with mouth-breathing and nasal-breathing. MATERIALS AND METHODS: The study included 120 individuals, 60 each in the nasal breathing (NB) and mouth breathing (MB) groups. 3D stereophotogrammetry, lateral cephalometric radiographs, and intraoral examination results were recorded by the researchers to determine the morphological differences between the MB group and the NB group. The study utilized cephalometric radiographs for 2D hard tissue measurements and 3D stereophotogrammetric records for linear and angular measurements. RESULTS: Statistically significant differences were found between the NB and MB groups' SNB angles (respectively, 79.3 ± 3.04, 76.6 ± 4.24, and p=0.002). Also, the NB group's SN-GoGn angle was lower than the MB group's (respectively, 31.5 ± 5.12, 36.0 ± 5.55, and p=0.002). Considering the Jarabak ratio, the NB group's Jarabak ratio was higher than the MB group (respectively,65.7 ± 4.16, 62.6 ± 4.10, and p=0.014). In 3D stereophotogrammetry measurements, increased Li-Me' was detected in the MB group than in NB group. CONCLUSION: Mouth breathing results in significant morphological differences that affect the development of both soft tissues and skeletal structures. Orthodontists utilize these characteristic features observed in mouth-breathing anomalies for early diagnosis and consider referring their patients for medical treatment of mouth breathing.

Accuracy of edentulous full-arch implant impression: An in vitro comparison between conventional impression, intraoral scan with and without splinting, and photogrammetry.

OBJECTIVES: The purpose of this in vitro study was to compare the trueness and precision of complete arch implant impressions using conventional impression, intraoral scanning with and without splinting, and stereophotogrammetry. MATERIALS AND METHODS: An edentulous model with six implants was used in this study. Four implant impression techniques were compared: the conventional impression (CI), intraoral scanning (IOS) without splinting, intraoral scanning with splinting (MIOS), and stereophotogrammetry (SPG). An industrial blue light scanner was used to generate the baseline scan from the model. The CI was captured with a laboratory scanner. The reference best-fit method was then applied in the computer-aided design (CAD) software to compute the three-dimensional, angular, and linear discrepancies among the four impression techniques. The root mean square (RMS) 3D discrepancies in trueness and precision between the four impression groups were analyzed with a Kruskal-Wallis test. Trueness and precision between single analogs were assessed using generalized estimating equations. RESULTS: Significant differences in the overall trueness (p = .017) and precision (p < .001) were observed across four impression groups. The SPG group exhibited significantly smaller RMS 3D deviations than the CI, IOS, and MIOS groups (p < .05), with no significant difference detected among the latter three groups (p > .05). CONCLUSIONS: Stereophotogrammetry showed superior trueness and precision, meeting misfit thresholds for implant-supported complete arch prostheses. Intraoral scanning, while accurate like conventional impressions, exhibited cross-arch angular and linear deviations. Adding a splint to the scan body did not improve intraoral scanning accuracy.

"Utility of Smartphone-based Three-dimensional Surface Imaging for Digital Facial Anthropometry".

Background: The utilization of three-dimensional (3D) surface imaging for facial anthropometry is a significant asset for patients undergoing maxillofacial surgery. Notably, there have been recent advancements in smartphone technology that enable 3D surface imaging.In this study, anthropometric assessments of the face were performed using a smartphone and a sophisticated 3D surface imaging system. Methods: 30 healthy volunteers (15 females and 15 males) were included in the study. An iPhone 14 Pro (Apple Inc., USA) using the application 3D Scanner App (Laan Consulting Corp., USA) and the Vectra M5 (Canfield Scientific, USA) were employed to create 3D surface models. For each participant, 19 anthropometric measurements were conducted on the 3D surface models. Subsequently, the anthropometric measurements generated by the two approaches were compared. The statistical techniques employed included the paired t-test, paired Wilcoxon signed-rank test, Bland-Altman analysis, and calculation of the intraclass correlation coefficient (ICC). Results: All measurements showed excellent agreement between smartphone-based and Vectra M5-based measurements (ICC between 0.85 and 0.97). Statistical analysis revealed no statistically significant differences in the central tendencies for 17 of the 19 linear measurements. Despite the excellent agreement found, Bland-Altman analysis revealed that the 95% limits of agreement between the two methods exceeded ±3 mm for the majority of measurements. Conclusion: Digital facial anthropometry using smartphones can serve as a valuable supplementary tool for surgeons, enhancing their communication with patients. However, the proposed data suggest that digital facial anthropometry using smartphones may not yet be suitable for certain diagnostic purposes that require high accuracy.

What can a morphometric study of unoperated children teach us about the natural history of metopic synostosis?

OBJECTIVE: Outcomes of surgical repair of trigonocephaly are well reported in the literature, but there is a paucity of information on the natural history of unoperated children. The authors evaluated a group of unoperated children with metopic synostosis to describe the natural change in head shape over time. METHODS: A database was screened for scans of children with unoperated trigonocephaly (2010-2021). Multisuture cases and those with a metopic ridge were excluded. Three-dimensional surface scans (3D stereophotogrammetry/CT) were used for morphological analysis. Nine previously published parameters were used: frontal angle (FA30°), anteroposterior (AP) volume ratio (APVR), AP area ratio (APAR), AP width ratios 1 and 2 (APWR1 and APWR2), and 4 AP diagonal ratios (30° right APDR [rAPDR30], 30° left APDR [lAPDR30], 60° right APDR [rAPDR60], and 60° left APDR [lAPDR60]). RESULTS: Ninety-seven scans were identified from a cohort of 316 patients with a single metopic suture, in which the male-to-female ratio was 2.7:1. Ages at the time of the scan ranged from 9 days to 11 years and were stratified into 4 groups: group 1, < 6 months; group 2, 6-12 months; group 3, 1-3 years; and group 4, > 3 years. Significant improvements were detected in 5 parameters (APVR, APAR, APWR1, rAPDR30, and lAPDR30) over time, whereas no significant differences were found in FA30, APWR2, rAPDR60, and lAPDR60 between age groups. CONCLUSIONS: Forehead shape (surface area and volume), as well as narrowing and anterolateral contour at the frontal points, differed significantly over time without surgery. However, forehead angulation, narrowing, and anterolateral contour at temporal points did not show significant differences. This knowledge will aid in surgical and parental decision-making.

Biparietal remodelling and total vault remodelling in scaphocephaly-a comparative study using 3d stereophotogrammetry.

PURPOSE: The aim of the study was to compare the results of two surgical techniques for the treatment of isolated sagittal synostosis (ISS) by means of 3D stereophotogrammetry. One technique, the Renier's "H" technique (RHT) comprised a biparietal expansion, the other, the total vault remodeling (TVR) included also a frontal remodeling. METHODS: The two groups of operated children were compared with a third control group of normocephalic children. The 3D scanning was performed in all children between 12 and 245 months of age. On each 3D image six measurements and indices have been made, with the aim of evaluating not only length and width of the head, but also the height. The cranial index (CI) was measured in a plane parallel to the nasion-tragus plane, at the intersection with the opisthocranion. RESULTS: Each of the three groups (RHT, TVR, control group) included 28 children. The measurements that were influenced by the correction of the frontal bossing, namely the CI and the sagittal length, were closer to normocephaly after TVR than after RHT. Lesser or no statistical difference was documented in the measurements evaluating the biparietal aspect and the height of the vertex, indicating that the biparietal expansion is effective in both procedures. CONCLUSION: Based on our results TVR results in a better esthetical outcome, particularly in relation to the direct surgical remodeling of the frontal bossing.

Accuracy of intraoral optical scan versus stereophotogrammetry for complete-arch digital implant impression: An in vitro study.

PURPOSE: To assess and compare the accuracies of intraoral scanners (IOS) and stereophotogrammetry (SPG) devices for complete-arch digital implant impressions. METHODS: A 4-analog model was digitized using a desk scanner to obtain a reference file. Thirty test scans were conducted using the investigated IOS device, while an additional 30 scans were performed using the SPG device. Using the best-fit algorithm, the resulting 60 test files were aligned with the reference file. Linear (ΔX, ΔY, and ΔZ-axis) and angular deviations (ΔANGLE) were evaluated. Three-dimensional (3D) deviation was calculated based on the Euclidean distance (ΔEUC). The analysis was stratified according to the scanning device and implant position. Fisher's F and t-tests were used to compare the variances and expected values of the two scanning systems. RESULTS: IOS expressed a higher 3D (ΔEUC) mean deviation than SPG (52.8 µm vs. 33.4 µm, P < 0.0001), with extreme measurements up to 181.9 µm. A significantly higher standard deviation (SD) was associated with IOS (37.1 µm vs. 17.7 µm, P < 0.0001). Considering angular deviations, the IOS showed slightly higher angular mean deviations (ΔANGLE) than the SPG (0.28° vs. 0.24°, P = 0.0022), with extreme measurements of up to 0.73°. The SPG SD values were significantly lower than the IOS SD values (0.14° vs. 0.04°, P < 0.0001). CONCLUSIONS: The SPG showed significantly higher 3D and angular accuracies for complete arch implant impressions, with consistent repeatability. IOS scanning revealed significantly higher extreme deviations exceeding the acceptable threshold value. Despite study limitations, SPG appears more feasible than IOS for complete-arch digital implant impressions.

Assessing the potential of remote sensing-based models to predict old-growth forests on large spatiotemporal scales.

Old-growth forests provide a broad range of ecosystem services. However, due to poor knowledge of their spatiotemporal distribution, implementing conservation and restoration strategies is challenging. The goal of this study is to compare the predictive ability of socioecological factors and different sources of remotely sensed data that determine the spatiotemporal scales at which forest maturity attributes can be predicted. We evaluated various remotely sensed data that cover a broad range of spatial (from local to global) and temporal (from current to decades) extents, from Airborne Laser Scanning (ALS), aerial multispectral and stereo-imagery, Sentinel-1, Sentinel-2 and Landsat data. Using random forests, remotely sensed data were related to a forest maturity index available in 688 forest plots across four ranges of the French Alps. Each model also includes socioecological predictors related to topography, socioeconomy, pedology and climatology. We found that the different remotely sensed data provide information on the main forest structural characteristics as defined by ALS, except for Landsat, which has a too coarse resolution, and Sentinel-1, which responds differently to vegetation structure. The predictions were quite similar considering aerial remotely sensed data, on the one hand, and satellite remotely sensed data, on the other hand. Socioecological variables are the most important predictors compared to the remote sensing metrics. In conclusion, our results indicate that a wide range of remotely sensed data can be used to study old-growth forests beyond the use of ALS and despite different abilities to predict forest structure. Accounting for socioecological predictors is indispensable to avoid a significant loss of predictive accuracy. Remotely sensed data can allow for predictions to be made at different spatiotemporal resolutions and extents. This study paves the way to large-scale monitoring of forest maturity, as well as for retrospective analyses which will show to what extent predicted maturity change at different dates.

Immediate Loading of Zygomatic Implants Using a Dual Scan Technique.

The immediate loading protocol has become increasingly popular due to the progressive growth in demand for a reduction in treatment times. The possibility of applying this protocol would depend on certain important factors. The application of the digital workflow mentioned in the protocol guarantees rapidity, precision, and esthetics. This report aims to describe a fully digital workflow using a dual scan impression technique to fabricate immediate fixed complete dentures (FCDs) for zygomatic and standard implants. A 58-year-old female patient requested treatment for her severely atrophic maxilla, and four unrehabilitated implants in the mandible. After proper diagnosis and planification, four zygomatic implants and two standard implants were placed. During the surgery, transmucosal abutments were placed on all implants. After suturing, the positions of the implants were recorded using a stereophotogrammetric technique, creating a standard tessellation (STL) file. In the lower arch, the second phase of the surgery was carried out: the transmucosal abutments were placed, and then the implant positions were recorded in the same way. The soft tissues were rescanned after suturing with an intraoral scanner (IOS), and all STL files were aligned to obtain the virtual final models. The pre-design after virtual modifications was aligned with the definitive models. The provisional prostheses were milled and placed after six hours after the surgery, and the definitive prostheses were placed six months after the surgery. The dual scan technique used obtained a precise fit for both the provisional and definitive FCDs. This technique might be an effective and reliable alternative for the fabrication of immediate and definitive screw-retained FCDs in a completely digital workflow. The time taken for scanning and fabrication was reduced, and the clinician's and patient's satisfaction were improved.

Clockwise versus counterclockwise rotation in bimaxillary surgery: 3D analysis of facial soft tissue outcomes.

PURPOSE: This study aimed to compare facial 3D soft tissue changes in subjects with Class III deformities who underwent bimaxillary clockwise (CW) and counterclockwise (CCW) rotational orthognathic surgery. METHODS: Asian Class III subjects who completed bimaxillary surgical orthodontic treatments were enrolled and categorized into CW and CCW groups based on maxillary occlusal plane alterations. Preoperative and 9-month follow-up cone-beam computed tomography (CBCT) and 3D stereophotogrammetry were obtained, superimposed, and quantified for skeletal movements and soft tissue changes in six facial regions. Inverse probability of treatment weighting (IPTW) adjusted for potential confounding factors. RESULTS: Thirty-seven subjects were included (CW group, n = 20; CCW group, n = 17). Postsurgical chin volume significantly reduced in the CW group compared to the CCW group (mean difference 6362 mm3; p = 0.037), and intergonial width significantly decreased in the CW group (mean difference 6.2 mm; p = 0.005). The postoperative alar width increased by 1.04 mm and 1.22 mm in the CW and CCW groups, respectively (p = 0.70). However, these changes were not significantly correlated to the direction of MMC pitch. CONCLUSION: Clockwise rotation of the bimaxillary complex demonstrated a significant advantage in reducing chin volume and intergonial width compared to counterclockwise rotation, leading to a reduced frontal lower face width among Asian Class III subjects.

Longitudinal Three-Dimensional Stereophotogrammetric Growth Analysis in Infants with Unilateral Cleft Lip and Palate from 3 to 12 Months of Age.

This longitudinal study aimed to evaluate facial growth and soft tissue changes in infants with complete unilateral cleft lip, alveolus, and palate (CUCLAP) at ages 3, 9, and 12 months. Using 3D images of 22 CUCLAP infants, average faces and distance maps for the entire face and specific regions were created. Color-coded maps highlighted more significant soft tissue changes from 3 to 9 months than from 9 to 12 months. The first interval showed substantial growth in the entire face, particularly in the forehead, eyes, lower lip, chin, and cheeks (p < 0.001), while the second interval exhibited no significant growth. This study provides insights into facial soft tissue growth in CUCLAP infants during critical developmental stages, emphasizing substantial improvements between 3 and 9 months, mainly in the chin, lower lip, and forehead. However, uneven growth occurred in the upper lip, philtrum, and nostrils throughout both intervals, with an overall decline in growth from 9 to 12 months. These findings underscore the dynamic nature of soft tissue growth in CUCLAP patients, highlighting the need to consider these patterns in treatment planning. Future research should explore the underlying factors and develop customized treatment interventions for enhanced facial aesthetics and function in this population.

Protocol Establishment and Reliability Verification of Three-Dimensional Digital Stereophotogrammetry in Lower Eyelid Anthropometry.

BACKGROUND: Three-dimensional (3D) stereophotogrammetry has been widely used in anthropometry for both medical and esthetic purposes. However, no studies have assessed its reliability on measuring the lower eyelid by 3D imaging. This study aimed to establish a standardized 3D anthropometric protocol for lower eyelid region and validate its reliability. METHODS: Fifty-eight participants (116 eyes) were recruited with mean age of 39.14 ± 11.25 years. Two sets of VECTRA 3D images were taken for each subject, and each set of images was individually measured twice by two raters. Twenty-seven landmarks were identified in the lower eyelid region, and then 19 linear, 4 curvilinear, 7 angular and 2 areal metrics were assessed for intrarater, interrater and intramethod reliability. RESULTS: High reliability was found in this 3D imaging-based lower eyelid anthropometry. The mean absolute difference within 2 intrarater measurement were 0.22 and 0.08 units, the technical errors measurement were 0.31 and 0.15 units, the relative errors of measurement were 0.90% and 0.31%, the relative technical errors of measurement were 1.53% and 0.64%, and the intra-group correlation coefficient was 0.99 and 0.99. The results for interrater measurement were 0.53 units, 0.59 units, 2.94%, 3.41% and 0.96, and for intramethod measurement were 0.71 units, 0.77 units, 4.12%, 4.05% and 0.95 units, respectively. CONCLUSION: 3D stereophotogrammetry is reliable for lower eyelid anthropometry. The standardized protocol can be further applied for many purposes such as lower eyelid aging evaluation, surgical related assessment and periocular rejuvenation plan. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Three-dimensional evaluation of symmetry in facial palsy reanimation using stereophotogrammetric devices: A series of 15 cases.

Facial palsy can severely compromise quality of life, significantly altering the harmony and symmetry of the face, which can be restored by surgical rehabilitation. The aim of the study was the quantification of facial symmetry following facial reanimation. Fifteen consecutive adult patients were surgically treated through triple innervation for reanimation of flaccid unilateral facial paralysis (contralateral facial nerve, masseteric nerve, and hypoglossal nerve) and fascia lata graft for definition of the nasolabial sulcus. In the preoperative stage and at least 11 months after the surgical treatment, three-dimensional facial images were recorded through stereophotogrammetry in a neutral (rest) position, and with Mona Lisa and full-denture (maximum) smiles. Labial commissure inclination relative to the interpupillary axis, and a surface assessment of local facial asymmetry at rest and while smiling were obtained for the upper, middle, and lower facial thirds. The angle between the interpupillary axis and the labial commissure significantly improved in post-surgical acquisitions, regaining symmetry at rest (t-test; p < 0.001). Facial symmetry increased significantly when passing from pre-to postsurgical facial scans, from the lower to the upper facial third, and from the full smile to the rest position (ANOVA; p < 0.001). After treatment, the full smile recovered more symmetry than the other two expressions. In summary, surgical treatment significantly reduced facial asymmetry, but this reduction differed significantly among the various animations and facial thirds. The results of this study confirmed clinical findings of significant static and dynamic improvements in facial symmetry after triple innervation reanimation surgery.