Continuous atmospheric pressure interfaced ion trap mass spectrometry with thermal desorption for detection of nonvolatile drugs.

The escalating need for prompt and highly sensitive on-site detection of trace-level drugs is fueling the advancement of miniature, high-performance mass spectrometers and analytical methodologies. In this study, a miniature continuous atmospheric pressure interfaced ion trap mass spectrometer integrated with thermal desorption acetone-assisted photoionization (TD-CAPI-ITMS) was developed for highly sensitive detection of nonvolatile drugs in saliva and blood. By strategically extending the sampling time of the TD-CAPI-ITMS to cover the entire desorption process, a remarkable two-order-of-magnitude enhancement in the signal intensity of individual drugs was observed. Moreover, the simultaneous detection of drug mixtures with widely varying boiling points and saturation vapor pressures was accomplished. Optimization of the parameters yielded a limit of detection (LOD) for ketamine and 5F-EMB-PICA of 1 pg/µL accompanied by a robust stability, as evidenced by a relative standard deviation (RSD) of 5.30 %. Combined with straightforward liquid-liquid extraction, the sensitivity of drugs in saliva as low as 10 pg/µL was achieved, which met the requirements of Chinese national standard GA1333-2017. Owing to its exceptional sensitivity, the matrix effect present in blood samples was significantly alleviated through dilution, allowing for accurate monitoring of antibiotic concentrations. The results underscore the substantial potential of the TD-CAPI-ITMS for lab-free applications in drug-related forensic analysis, therapeutic drug monitoring, and pharmacokinetic studies.

Thermal desorption technique to speciate mercury in carbonate, silicate, and organic-rich soils.

Thermal desorption is a well-assessed technique to speciate mercury (Hg) in soils and sediments. However, the effects related to the different matrices are still not properly assessed. In this study, thermal desorption was applied to Hg-free calcite mixed with Hg standard and soils rich in carbonate and silicate minerals, as well as organic matter. Hg0, HgCl2, HgO, α-HgS, ß-HgS and organo-mercuric compounds were recognized, pointing out that the soil matrix operates notable differences in terms of breakdown temperatures of the Hg-compounds and suggesting that the mineralogical composition of soil has to be investigated before applying the thermal desorption technique. Furthermore, the presence of Hg0 was carefully evaluated since, as already observed, it forms Hg2+, which increases mercury mobility in the pedological cover with important consequences for those soils contaminated and located close to decommissioned or active mining areas and/or industrial sites (e.g. chloro-alkali industries). Experimental runs were thus carried out by using carbonate-, silicate- and organic-rich soils doped with liquid Hg. It was observed that Hg0 tends to be oxidized to form Hg+ and then Hg2+ as a function of soil matrix and reaction time. Surprisingly, the oxidation rate is rather fast, since after 42 days the initial content of Hg0 is halved, thus following an exponential decay. This implies that in Hg0-polluted areas, the fate of the resulting Hg2+ can be that to: i) be adsorbed by organic matter and/or Fe-Mn-Al oxides and/or ii) feed shallow aquifers. This study is a further step ahead to understand the behavior of Hg in contaminated soils from industrial and mining areas where liquid Hg is occurring in different soil matrices and may provide useful indications for remediation operations.

Analysis of PFAS and further VOC from fluoropolymer-coated cookware by thermal desorption-gas chromatography-mass spectrometry (TD-GC-MS).

Per- and polyfluoroalkyl substances (PFAS) are used in the production of PTFE based coatings for cookware. In this study, emission of PFAS and further volatile organic compounds (VOC) from kitchenware articles were investigated. First, method development for thermal extraction of baking trays, frying pans and baking mats at 250 °C was done by testing three different extraction devices. A thermal desorption oven showed the best blank and highest recoveries of PFAS analytes (70-101% for 12 perfluorocarboxylic acids (PFCAs), 2 fluorotelomer alcohls (FTOHs), 3 per- and polyfluoroether carboxylic acids (PFECAs), 1 polyfluoroether (PFE)). Second, 18 cookware samples, a PTFE micro powder and 2 lab made coating strips have been investigated. No PFAS were detected in 12 samples (limits of detection: 1-13 ng/dm2). PFCAs (C5-C23) were detected in a baking tray in amounts up to 34 ng/dm2. A baking mat contained 3 ng/dm2 PFOA. FTOHs were not detected in the samples. A PFECA (bC7O2) and its hydride (bC6O2H PFE) were detected in one coating intended for use in frying pans. The hydrides of the PFECA mixture, b(C3O1)nC3 PFECA (Krytox 157FSH), were detected in five baking trays. The PFAS target analytes were not detectable in the five investigated frying pans. Analysing further VOC in the emissions of coatings, 175 compounds could be identified, including alkanes, alkenes, aromatic substances, esters, aldehydes, ketones, ethers, alcohols, carboxylic acids, siloxanes and sulphur, nitrogen, as well as chlorine containing compounds (< 10 µg/dm2). The identified substances cannot be connected to the basic coating polymer of the kitchenware articles, which were PTFE and PES. All samples have undergone a threefold thermal extraction. No substances could be detected in the second and third consecutive extraction, which means that a removal and no new formation of the investigated PFAS as well as the further VOC at 250 °C has occurred.

Generating pooled quality control samples of volatile organic compounds.

Untargeted analysis of volatile organic compounds (VOCs) from exhaled breath and culture headspace are influenced by several confounding factors not represented in reference standards. In this study, we propose a method of generating pooled quality control (QC) samples for untargeted VOC studies using a split-recollection workflow with thermal desorption tubes. Sample tubes were desorbed and split from each sample and recollected onto a single tube, generating a pooled QC sample. This QC sample was then repeatedly desorbed and recollected with a sequentially lower split ratio allowing injection of multiple QC samples. We found pooled QC samples to be representative of complex mixtures using principal component analysis and may be useful in future longitudinal, multi-centre, and validation studies to assess data quality and adjust for batch effects.

Quantitive variation of male and female-specific compounds in 99 drosophilid flies.

Variation in sex pheromones is regarded as one of the causes of reproductive isolation and speciation. We recently identified 51 male- and female-specific compounds - many of which function as sex pheromones - in 99 drosophilid species [1]. Here, we report that despite many of these compounds being shared between species, their quantities differ significantly. For example, although 34 drosophilid species share the male-specific compound cis-vaccenyl acetate (cVA), which plays a critical role in regulating various social and sexual behaviors, the amount of cVA can differ by up to 600-fold between different species. Additionally, we found 7-tricosene, the cuticular hydrocarbon pheromone, present in 35 Drosophila species. Our findings indicate that 7-tricosene is equally present in both sexes of 14 species, more abundant in males of 14 species, and more abundant in females of 7 species. We provide raw data on the concentration of potential pheromone components in the 99 drosophilids, which can provide important insights for further research on the behavior and evolution of these species. Quantitative variations highlight species-specific patterns, suggesting an additional mechanism for reproductive isolation built on specific combinations of compounds at set concentrations.

Novel multiple extraction thermal desorption approach prior to gas chromatography for the determination of residual solvents applied to modified cellulose.

In this work, multiple extraction thermal desorption (METD), as a sample introduction method for GC, was developed. This technique was used for the determination of residual solvents (RS) in modified cellulose, because it is practically impossible to dissolve or distribute it uniformly in water and common organic solvents. Moreover, METD facilitates the optimization of the desorption time and it is more sensitive to quantify trace level volatiles in insoluble material, compared to direct dynamic desorption (DDD). In addition, METD provides diagnostic information about the sample-sorbent interaction. Three solvents (methanol, ethanol and tert-butanol) were determined in two types of modified cellulose (dialdehyde cellulose (DAC) and DAC-ethylenediamine (DAC-EDA)). It was shown that good linearity over a wide concentration range was achieved. The limits of detection (LOD) and limits of quantification (LOQ) for the different solvents ranged from 0.1 to 0.3 µg and from 0.3 to 0.9 µg per tube, respectively. Accuracy of the METD method was verified by using an alternative method based on the decomposition of the modified celluloses by Trichoderma reesei cellulase, followed by headspace-trap-GC (HS-trap-GC). The results obtained from the two validated methods were found to be similar (relative deviation < 17.0 %). However, the developed METD-GC method is preferable for the analysis of RS in modified cellulose since it does not require sample pretreatment and possesses higher sensitivity.

PFAS emissions from functional textiles using micro-chamber and thermal desorption coupled to two-dimensional gas chromatography-time of flight mass spectrometry (TD-GC×GC-TOF MS).

Per- and polyfluoroalkyl substances (PFAS), in the polymeric form, have been used extensively in functional textiles, including firefighter's turnout gear (e.g., jackets and pants), where PFAS are applied to confer oil and water resistance. However, growing concerns over the persistence, potential toxicity, and environmental impact of PFAS have prompted a thorough assessment of potential exposure pathways. Here, we report the emission of PFAS from three firefighter turnout gear jackets at 38 °C. Volatile emissions from the three layers (outer layer, moisture barrier, and thermal liner) were collected onto sorbent tubes via dynamic headspace sampling using a micro-scale chamber device kept at 38 °C for one hour. The emission was characterized using thermal desorption (TD) coupled to two-dimensional gas chromatography - time-of-flight mass spectrometry (GC×GC-TOF MS). The enhanced separation capacity of GC×GC was essential due to the high number of compounds present in each sample, especially for the fabrics from used turnout gear jackets. Based on the filtering expressions, including two-dimensional retention time (1tr and 2tr) and PFAS diagnostic fragment ions (m/z 69, 95, and 131), fluorotelomer alcohols (FTOHs) and fluorotelomer acrylates were identified using standards and spectral matching with the NIST database. After conducting a non-targeted tile-based workflow, jackets (both used and unused) and layers were compared, resulting in the identification of the top 15 discriminating features from over 400 chromatographic peaks. Finally, preliminary FTOH emission experiments showed some usage and layers trends that are aligned with those reported using solvent extraction. Highest levels of FTOHs were found in the moisture barrier, followed by the outer layer and the thermal liner. Older jackets emitted higher levels of 8:2 FTOH and 10:2 FTOH than a newer jacket. In contrast, a newer jacket used for one year had emissions containing higher levels of 6:2 FTOH. Investigating routes of exposure and identifying new PFAS targets are critical steps in evaluating the environmental and health impacts of these persistent chemicals.

Analysis of nitrogen-containing rocket fuel transformation products in loamy soil by thermal desorption gas chromatography-tandem mass spectrometry.

Unsymmetrical dimethylhydrazine (UDMH) based rocket fuel, when released into the soil, undergoes oxidative transformations to form a variety of toxic nitrogen-containing products (TPs). Loamy soils containing aluminosilicates (clay) are capable of strong binding and retention of UDMH TPs due to a combination of polar sorption and cation-exchange properties, posing challenges for their extraction and quantification. To overcome this problem, the present study proposes direct thermal desorption (TD) of analytes from loam facilitated by the addition of modifiers competing with UDMH TPs for sorption centers and ensuring their conversion into molecular form. Among tested additives, the mixture of potassium chloride and hydroxide demonstrated the best performance and provided recoveries of the most UDMH TPs exceeding 70% under optimized TD conditions (200°C, 30 min). The online combination of TD with gas chromatography-tandem mass spectrometry allowed for the development of a method for the determination of 15 UDMH TPs in loamy soils with limits of detection in the range of 0.2-15 µg/kg. The use of matrix-matched calibration and deuterated internal standards ensured high accuracy (80%-100%) and precision (relative standard deviation < 18%) of the analysis. The developed method was validated and successfully tested in the analyses of real loamy soil samples polluted with rocket fuel.

Thermal desorption - gas chromatography - mass spectrometry (TD-GC-MS) analysis of PFAS used in food contact materials.

Per- and polyfluoroalkyl substances (PFAS) are used in food contact materials (FCMs), e.g. as production aids in the fabrication of PTFE based coatings for kitchenware or as additives in paper and board. Growing concerns about the environment and health related to PFAS have led to an increasing interest in monitoring PFAS levels in FCMs as well as their migration into food. In this study, method development for the analysis of PFAS by thermal desorption - gas chromatography - mass spectrometry (TD-GC-MS) was done. In addition to fluorotelomer alcohols (FTOHs), which are the only PFAS commonly analysed by GC-MS, it was proven that perfluorocarboxylic acids (PFCAs) and per- and polyfluoroether carboxylic acids (PFECAs) as well as their thermolysis products, perfluoroethers (PFEs) and perfluoroalkenes, can be analysed by GC-MS without prior derivatization. Screening for PFCAs and FTOHs was possible by electron impact ionization (EI) using group specific SIM fragments. Confirmation of identity has been done by EI scans as well as chemical ionization (CI) SIM measurements. LODs (limits of detection) of PFCAs, FTOHs and PFECAs in the TD-GC-MS instrument were in the low pg range. Thermal degradation of PFCAs and PFECAs during TD-GC-MS measurement was investigated.

Plastic Quantification and Polyethylene Overestimation in Agricultural Soil Using Large-Volume Pyrolysis and TD-GC-MS/MS.

Quantification of microplastics in soil is needed to understand their impact and fate in agricultural areas. Often, low sample volume and removal of organic matter (OM) limit representative quantification. We present a method which allows simultaneous quantification of microplastics in homogenized, large environmental samples (>1 g) and tested polyethylene (PE), polyethylene terephthalate (PET), and polystyrene (PS) (200-400 µm) overestimation by fresh and diagenetically altered OM in agricultural soils using a new combination of large-volume pyrolysis adsorption with thermal desorption-gas chromatography-tandem mass spectrometry (TD-GC-MS/MS). Characteristic MS/MS profiles for PE, PET, and PS were derived from plastic pyrolysis and allowed for a new mass separation of PET. Volume-defined standard particles (125 × 125 × 20 µm3) were developed with the respective weight (PE: 0.48 ± 0.12, PET: 0.50 ± 0.10, PS: 0.31 ± 0.08 µg), which can be spiked into solid samples. Diagenetically altered OM contained compounds that could be incorrectly identified as PE and suggest a mathematical correction to account for OM contribution. With a standard addition method, we quantified PS, PET, and PEcorrected in two agricultural soils. This provides a base to simultaneously quantify a variety of microplastics in many environmental matrices and agricultural soil.

A feasibility study of sample re-collection in the analysis of selected volatile compounds in breath samples using GC×GC-TOFMS.

In this study, we aimed to assess the feasibility of re-collecting breath samples using the Centri® (Markes International, Bridgend, UK) followed by two-dimensional gas chromatography coupled with time-of-flight mass spectrometry (GC×GC-TOFMS) analysis. The work was conducted in two main phases. In the first phase, we evaluated the re-collection performance by analyzing two sets of standards, including a Grob mix primary solution and a standard mixture of 20 selected volatile compounds (VCs) covering different classes of organic species commonly found in breath samples. The intra-day and inter-day precision (reported as relative standard deviation (RSD),%) for the re-collection of the Grob mix primary solution were in the range of 1 % to14 % and 3 % to12 %, respectively. The re-collection accuracy ranged from 78 % to 97 %. The intra-day RSD for the re-collection of the standard mixture of selected VCs was within 20 % for all compounds, except for acetone and nonane. The precision was within 25 % for all compounds, except for nonane, n-hexane, 1,4-dichlorobenzene, and decane, which exhibited less than 36 % RSD. The re-collection accuracy was in the range of 67 % to 129 %. In the second phase of the study, the re-collection performance in breath analysis was evaluated via five repetitive splitting and re-collection of six breath samples obtained from healthy adults, realizing a total of 30 breath analyses. Initially, we evaluated the re-collection performance by considering all features obtained from breath analysis and then focused on the 20 VCs commonly found in breath samples. The re-collection accuracy for total breath features ranged from 86 to 103 %, and the RSDs were in the range of 1.0 % to 10.4 %. For the selected VCs, the re-collection accuracy of all compounds, except for undecane and benzene, was in the range of 71 % to 132 %.

The Influence of Rhenium Content on Helium Desorption Behavior in Tungsten-Rhenium Alloy.

To investigate the influence of different rhenium contents on the helium desorption behavior in tungsten-rhenium alloys, pure tungsten and tungsten-rhenium alloys were irradiated with helium under the same conditions. All irradiated samples were characterized using TDS and DBS techniques. The results indicate that the addition of rhenium can reduce the total helium desorption quantity in tungsten-rhenium alloys and slightly accelerate the reduction in the concentration of vacancy-type defects accompanying helium dissociation. The desorption activation energy of helium is approximately 2 eV at the low-temperature peak (~785 K) and about 4 eV at the high-temperature peak (~1475 K). An increase in rhenium content causes the desorption peak to shift towards higher temperatures (>1473 K), which is attributed to the formation of the stable complex structures between rhenium and vacancies. Besides, the migration of He-vacancy complexes towards traps and dynamic annealing processes both lead to the recovery of vacancy-type defects, resulting in a decrease in the positron annihilation S parameters.

Unveiling Small-Sized Plastic Particles Hidden behind Large-Sized Ones in Human Excretion and Their Potential Sources.

Health risks of microplastic exposure have drawn growing global concerns due to the widespread distribution of microplastics in the environment. However, more evidence is needed to understand the exposure characteristics of microplastics owing to the limitation of current spectrum technologies, especially the missing information on small-sized particles. In the present study, laser direct infrared spectroscopy and thermal desorption-gas chromatography-mass spectrometry combined pyrolysis using a tubular furnace (TD-GC/MS) were employed to comprehensively detect the presence of plastic particles down to 0.22 µm in human excreted samples. The results showed that polyethylene (PE), polyvinyl chloride, PE terephthalate (PET), and polypropylene dominated large-sized (>20 µm) and small-sized plastic plastics (0.22-20 µm) in feces and urine. Moreover, fragments accounted for 60.71 and 60.37% in feces and urine, respectively, representing the most pervasive shape in excretion. Surprisingly, the concentration of small-sized particles was significantly higher than that of large-sized microplastics, accounting for 56.54 and 50.07% in feces (345.58 µg/g) and urine (6.49 µg/mL). Significant positive correlations were observed between the level of plastic particles in feces and the use of plastic containers and the consumption of aquatic products (Spearman correlation analysis, p < 0.01), suggesting the potential sources for plastic particles in humans. Furthermore, it is estimated that feces was the primary excretory pathway, consisting of 94.0% of total excreted microplastics daily. This study provides novel evidence regarding small-sized plastic particles, which are predominant fractions in human excretion, increasing the knowledge of the potential hazards of omnipresent microplastics to human exposure.

Benchmarking breath analysis using peppermint approach with gas chromatography ion mobility spectrometer coupled to micro thermal desorber.

The Peppermint Initiative, established within the International Association of Breath Research, introduced the peppermint protocol, a breath analysis benchmarking effort designed to address the lack of inter-comparability of outcomes across different breath sampling techniques and analytical platforms. Benchmarking with gas chromatography-ion mobility spectrometry (GC-IMS) using peppermint has been previously reported however, coupling micro-thermal desorption (µTD) to GC-IMS has not yet, been benchmarked for breath analysis. To benchmarkµTD-GC-IMS for breath analysis using the peppermint protocol. Ten healthy participants (4 males and 6 females, aged 20-73 years), were enrolled to give six breath samples into Nalophan bags via a modified peppermint protocol. Breath sampling after peppermint ingestion occurred over 6 h att= 60, 120, 200, 280, and 360 min. The breath samples (120 cm3) were pre-concentrated in theµTD before being transferred into the GC-IMS for detection. Data was processed using VOCal, including background subtractions, peak volume measurements, and room air assessment. During peppermint washout, eucalyptol showed the highest change in concentration levels, followed byα-pinene andß-pinene. The reproducibility of the technique for breath analysis was demonstrated by constructing logarithmic washout curves, with the average linearity coefficient ofR2= 0.99. The time to baseline (benchmark) value for the eucalyptol washout was 1111 min (95% CI: 529-1693 min), obtained by extrapolating the average logarithmic washout curve. The study demonstrated thatµTD-GC-IMS is reproducible and suitable technique for breath analysis, with benchmark values for eucalyptol comparable to the gold standard GC-MS.

Rapid Separation and Detection of Drugs in Complex Biological Matrix Using TD-CDI Mass Spectrometer.

The drug detection technology plays a pivotal role in the domains of pharmaceutical regulation and law enforcement. In this study, we introduce a method that combines thermal desorption corona discharge ionization (TD-CDI) with mass spectrometry for efficient drug detection. The TD-CDI module, characterized by its compact and simple design, enables the separation of analytes within seconds and real-time presentation of one or two analyte peaks on the mass spectrum most of the time, which reduces matrix interference and improves detection performance. Through experimental investigation, we studied the characteristics of TD-CDI for analyte separation and detection, even with the same mass number, and optimized the TD-CDI approach. TD-CDI-MS was employed for the rapid detection of drugs in various traditional medicine, food products, and human samples. Additionally, by utilizing TD-CDI for segmented hair direct analysis, it becomes possible to trace the drug usage cycle of individuals. This underscores the feasibility of the proposed analytical method within the realm of drug detection.

Using Hybrid PDI-Fe3O4 Nanoparticles for Capturing Aliphatic Alcohols: Halogen Bonding vs. Lone Pair-π Interactions.

In this study, Fe3O4 nanoparticles (FeNPs) decorated with halogenated perylene diimides (PDIs) have been used for capturing VOCs (volatile organic compounds) through noncovalent binding. Concretely, we have used tetrachlorinated/brominated PDIs as well as a nonhalogenated PDI as a reference system. On the other hand, methanol, ethanol, propanol, and butanol were used as VOCs. Experimental studies along with theoretical calculations (the BP86-D3/def2-TZVPP level of theory) pointed to two possible and likely competitive binding modes (lone pair-π through the π-acidic surface of the PDI and a halogen bond via the σ-holes at the Cl/Br atoms). More in detail, thermal desorption (TD) experiments showed an increase in the VOC retention capacity upon increasing the length of the alkyl chain, suggesting a preference for the interaction with the PDI aromatic surface. In addition, the tetrachlorinated derivative showed larger VOC retention times compared to the tetrabrominated analog. These results were complemented by several state-of-the-art computational tools, such as the electrostatic surface potential analysis, the Quantum Theory of Atoms in Molecules (QTAIM), as well as the noncovalent interaction plot (NCIplot) visual index, which were helpful to rationalize the role of each interaction in the VOC···PDI recognition phenomena.

A fast thermal desorption unit for micro thermal desorption tubes, Part I: Development of the system and proof of concept measurements with hyper-fast gas chromatography.

A system consisting of a thermal desorption unit (TDU) and micro thermal desorption tubes (µTD-tubes, 1.4 mm I.D., 10mg Tenax TA) for fast desorption of analytes was developed for the efficient combination of hyper fast gas chromatography with thermal desorption. The fast desorption is achieved by a significantly reduced thermal mass compared to conventional thermal desorption tubes. Therefore, extremely fast heating and cooling cycles are possible. Proof of concept measurements combining the new setup with a flow-field thermal gradient gas chromatograph (FF-TG-GC) and FID detection show good precision and linearity with R2≥0.995 in the analysis of an n-alkane mix (C8-C20). Thermal desorption occurs within 12s. The impact of reduced µTD-tube dimensions on desorption time, full width at half maximum (FWHM), breakthrough volumes, tube flow rates ergo linear velocities, porosity and back pressure is discussed.

Unravelling caramelization and Maillard reactions in glucose and glucose + leucine model cakes: Formation and degradation kinetics of volatile markers extracted during baking.

A large number of volatile compounds are formed during the baking of foods by reactions such as caramelization and Maillard reactions. Elucidating the reaction mechanisms may be useful to predict and control food quality. Ten reaction volatile markers were extracted during baking of solid model cakes implemented with known amounts of precursors (glucose with or without leucine) and then quantified by Thermal desorption-Gas chromatography-Mass spectrometry. The kinetic data showed that the level of air convection in the oven had no significant influence on the reaction rates. In contrast, increasing baking temperatures had a nonlinear accelerating impact on the generation of newly formed volatile compounds with a bell-shaped kinetic curve found for most of the markers at 200 °C. The presence of leucine triggered the activation of the Maillard and Strecker routes with a specific and very rapid formation of 3-Methylbutanal and pyrazines. A dynamic model was developed, combining evaporation flow rate and kinetic formation and consumption of reaction markers. It can be used to describe, for two furanic compounds of different volatilities, the vapor concentrations in the oven from the concentrations measured in the model cakes.

Mechanisms and extended kinetic model of thermal desorption in organic-contaminated soil.

Thermal desorption is a preferred technology for site remediation due to its various advantages. To ensure the effective removal of different pollutants in practical applications, it is necessary to understand the kinetic behaviors and removal mechanisms of pollutants in thermal desorption process. This paper explored the thermal desorption processes of five organic pollutants (nitrobenzene, naphthalene, n-dodecane, 1-nitronaphthalene, and phenanthrene) at 50-350 °C in two different subsoils with 6-18% moisture content. The results suggested that the thermal desorption process was well-fitted by the exponential decay model (R2 = 0.972-0.999) and could be divided into two distinct stages. The first stage was relatively fast and highly influenced by soil moisture, while the second stage showed a slower desorption rate due to the constraints imposed by the soil texture and structure. The influence of soil moisture on thermal desorption depended on the octanol/water partition coefficient (KOW) of pollutants. Pollutants with log KOW values lower than the critical value exhibited enhanced thermal desorption, while those with log KOW values higher than the critical value were inhibited. The critical value of log KOW might be between 3.33 and 4.46. Changes in soil texture and structure caused by heating promoted thermal desorption, especially for naphthalene, 1-nitronaphthalene and phenanthrene. The differences in texture and structure between the two soils diminished as the temperature increased. Finally, an extended kinetic model under changing temperature conditions was derived, and the simulation results for the two subsoils were very close to the actual thermogravimetric results, with the differences ranging from -1.28% to 0.94% and from -0.67% to 1.35%, respectively. These findings propose new insights into the influencing mechanisms of soil moisture and structure on the thermal desorption of organic pollutants. The extended kinetic model can provide reference for future kinetic research and guide practical site remediation.

Emission of volatile organic compounds during open fire cooking with wood biomass: Traditional three-stone open fire vs. gasifier cooking stove in rural Kenya.

Cooking with wood biomass fuels releases hazardous air pollutants, including volatile organic compounds (VOCs), that often disproportionally affect women and children. This study, conducted in Kwale and Siaya counties in Kenya, employed thermal desorption gas chromatography - mass spectrometry to analyse VOC emissions from cooking with a wood biomass three-stone open fire vs. top-lit updraft gasifier stove. In kitchens with adequate ventilation, total VOC levels increased from 35-252 µg∙m-3 before cooking to 2235-5371 µg∙m-3 during open fire cooking, whereas use of a gasifier stove resulted in reduced emissions from cooking by 48-77 % (506-2778 µg∙m-3). However, in kitchens with poor ventilation, there was only a moderate difference in total VOC levels between the two methods of cooking (9034-9378 µg∙m-3 vs. 6727-8201 µg∙m-3 for the three-stone open fire vs. gasifier stove, respectively). Using a non-target screening approach revealed significantly increased levels of VOCs, particularly benzenoids, oxygenated and heterocyclic compounds, when cooking with the traditional open fire, especially in closed kitchens, highlighting the effects of poor ventilation. Key hazardous VOCs included benzene, naphthalene, phenols and furans, suggesting potential health risks from cooking. In kitchens with good ventilation, use of the gasifier stove markedly reduced emissions of these priority toxic VOCs compared to cooking with an open fire. Thus, substituting open fires with gasifier stoves could help to improve household air quality and alleviate health risks. The study revealed that VOCs were present prior to cooking, possibly originating from previously cooked food (buildup) or the outside environment. VOC emissions were also exacerbated by reduced air flow in high humidity during rainfall, suggesting an area for further research. The findings underscore the importance of adopting cleaner cooking technologies and enhancing kitchen ventilation to mitigate the impacts of VOCs in developing countries.