Disposal of spent V2O5-WO3/TiO2 catalysts: A regeneration principle based on structure-activity relationships from carrier transformations.

Characterization and evaluation of hazardous spent V2O5-WO3/TiO2 catalysts are critical to determining their treatment or final disposal. This study employs a thermal approach to simulate the preparation of spent catalysts derived from commercial V2O5-WO3/TiO2 catalysts and investigate the structure-activity relationship of the carrier changes during the deactivation process. The results indicate that the catalyst carrier undergoes two processes: an increase in grain size and a transformation in crystal structure. Both structural and catalytic investigations demonstrate that the grain size for catalyst deactivation is 24.62 nm, and the formation of CaWO4 occurs before the crystalline transformation. The specific surface area is susceptible to an increase in grain size. The reactions of selective catalytic reduction involve the participation of both Brønsted acid and Lewis acid sites. The deactivation process of the carrier initially affects Brønsted acid sites, followed by a reduction in Lewis acid sites, resulting in a decline in NH3 adsorption capacity and oxidation. Correlation analysis reveals that changes in the physicochemical properties of the catalyst reduce the NO conversion, with the order being The grain size > Total acid amount > The surface area. It is recommended to recycle the spent catalyst if the carrier grain size is less than 25 nm. The findings of this investigation contribute to expanding the database for evaluating and understanding the physicochemical properties of spent catalysts for disposal.

Electronic Properties and Mechanical Stability of Multi-Ion-Co-Intercalated Bilayered V2O5.

Incorporating metal cations into V2O5 has been proven to be an effective method for solving the poor long-term cycling performance of vanadium-based oxides as electrodes for mono- or multivalent aqueous rechargeable batteries. This is due to the existence of a bilayer structure with a large interlayer space in the V2O5 electrode and to the fact that the intercalated ions act as pillars to support the layered structure and facilitate the diffusion of charged carriers. However, a fundamental understanding of the mechanical stability of multi-ion-co-intercalated bilayered V2O5 is still lacking. In this paper, a variety of pillared vanadium pentoxides with two types of co-intercalated ions were studied. The root-mean-square deviation of the V-O bonds and the elastic constants calculated by density functional theory were used as references to evaluate the stability of the intercalated compounds. The d-band center and electronic band structures are also discussed. Our theoretical results show that the structural characteristics and stability of the system are quite strongly influenced by the intercalating strategy.

High Performance Aqueous Zinc-Ion Batteries Developed by PANI Intercalation Strategy and Separator Engineering.

Aqueous zinc-ion batteries (ZIBs) have attracted burgeoning attention and emerged as prospective alternatives for scalable energy storage applications due to their unique merits such as high volumetric capacity, low cost, environmentally friendly, and reliable safety. Nevertheless, current ZIBs still suffer from some thorny issues, including low intrinsic electron conductivity, poor reversibility, zinc anode dendrites, and side reactions. Herein, conductive polyaniline (PANI) is intercalated as a pillar into the hydrated V2O5 (PAVO) to stabilize the structure of the cathode material. Meanwhile, graphene oxide (GO) was modified onto the glass fiber (GF) membrane through simple electrospinning and laser reduction methods to inhibit dendrite growth. As a result, the prepared cells present excellent electrochemical performance with enhanced specific capacity (362 mAh g-1 at 0.1 A g-1), significant rate capability (280 mAh g-1 at 10 A g-1), and admirable cycling stability (74% capacity retention after 4800 cycles at 5 A g-1). These findings provide key insights into the development of high-performance zinc-ion batteries.

Enabling Quasi-Zero-Strain Behavior of Layered Oxide Cathodes via Multiple-cations Induced Order-to-Disorder Transition.

The chemically pre-intercalated lattice engineering is widely applied to elevate the electronic conductivity, expand the interlayer spacing, and improve the structural stability of layered oxide cathodes. However, the mainstream unitary metal ion pre-intercalation generally produces the cation/vacancy ordered superstructure, which astricts the further improvement of lattice respiration and charge-carrier ion storage and diffusion. Herein, a multiple metal ions pre-intercalation lattice engineering is proposed to break the cation/vacancy ordered superstructure. Taking the bilayer V2O5 as an example, Ni, Co, and Zn ternary ions are simultaneously pre-intercalated into its interlayer space (NiCoZnVO). It is revealed that the Ni─Co neighboring characteristic caused by Ni(3d)-O(2p)-Co(3d) orbital coupling and the Co-Zn/Ni-Zn repulsion effect due to chemical bond incompatibility, endow the NiCoZnVO sample with the cation/vacancy disordered structure. This not only reduces the Li+ diffusion barrier, but also increases the diffusion dimension of Li+ (from one-dimension to two-dimension). Particularly, Ni, Co, and Zn ions co-pre-intercalation causes a prestress, which realizes a quasi-zero-strain structure at high-voltage window upon charging/discharging process. The functions of Ni ion stabilizing the lattice structure and Co or Zn ions activating more Li+ reversible storage reaction of V5+/V4+ are further revealed. The cation/vacancy disordered structure significantly enhances Li+ storage properties of NiCoZnVO cathode.

Tuning the band gap, optical, mechanical, and electrical features of a bio-blend by Cr2O3/V2O5 nanofillers for optoelectronics and energy applications.

This work presents a facile approach for controlling the optical and electrical parameters of a biopolymeric matrix for optoelectronics. Vanadium oxide (V2O5) and chromium oxide (Cr2O3) nanoparticles (NPs) were prepared and incorporated into the carboxymethylcellulose/polyethylene glycol (CMC/PEG) blend by simple chemical techniques. Transmission electron microscopy (HR-TEM), and X-ray diffraction (XRD) data showed that V2O5 and Cr2O3 exhibited spherical shapes with sizes in the range of 40-50 nm and 10-20 nm, respectively. In addition, the blend's degree of crystallinity was sensitive to the V2O5 and Cr2O3 doping ratios. The scanning electron microscopy (FE-SEM) and the elemental chemical analysis (EDAX) used to study the filler distribution inside the blend, and confirmed the existence of both V and Cr in the matrix. Fourier transform infrared (FTIR) spectroscopy showed that the dopants significantly affected the blend reactive (C-O-C, OH, and C=O) groups. The stress-strain curves illustrated the reinforcing effect of the dopants up to 1.0 wt\% Cr2O3/V. The transmittance and absorption index spectra in the visible-IR wavelengths decreased with increasing filler content. Utilizing Tauc's relation and (optical) dielectric loss, the direct (indirect) band gap narrowed from 5.6 (4.5) eV to 4.7 (3.05) eV at 1.0   wt\% Cr2O3/V. All films have an index of refraction in the range of 1.93-2.17. AC conductivity was improved with increasing filler content and temperature. The energy density at 50 °C is in the range of 1-3 J/m3. The influence of V2O5 and Cr2O3 content on the optical conductivity, dielectric constant, loss, and dielectric modulus of CMC/PEG was reported. These enhancements in electrical and optical properties, along with the potential for band gap engineering, offer promising prospects for advanced applications in optoelectronics and energy-related fields.

Solution-Processed Flexible Temperature Sensor Array for Highly Resolved Spatial Temperature and Tactile Mapping Using ESN-Based Data Interpolation.

High-performance flexible temperature sensors are crucial in various technological applications, such as monitoring environmental conditions and human healthcare. The ideal characteristics of these sensors for stable temperature monitoring include scalability, mechanical flexibility, and high sensitivity. Moreover, simplicity and low power consumption will be essential for temperature sensor arrays in future integrated systems. This study introduces a solution-based approach for creating a V2O5 nanowire network temperature sensor on a flexible film. Through optimization of the fabrication conditions, the sensor exhibits remarkable performance, sustaining long-term stability (>110 h) with minimal hysteresis and excellent sensitivity (∼-1.5%/°C). In addition, this study employs machine learning techniques for data interpolation among sensors, thereby enhancing the spatial resolution of temperature measurements and adding tactile mapping without increasing the sensor count. Introducing this methodology results in an improved understanding of temperature variations, advancing the capabilities of flexible-sensor arrays for various applications.

Effect of vanadium and tungsten loading order on the denitration performance of F-doped V2O5-WO3/TiO2 catalysts.

F-doped V2O5-WO3/TiO2 catalyst has been confirmed to have excellent denitration activity at low temperatures. Since the V2O5-WO3/TiO2 catalyst is a structure-sensitive catalyst, the loading order of V2O5 and WO3 may affect its denitration performance. In this paper, a series of F-doped V2O5-WO3/TiO2 catalysts with different V2O5 and WO3 loading orders were synthesized to investigate the effect of denitration performance at low temperatures. It was found that the loading orders led to significant gaps in denitration performance in the range of 120-240 °C. The results indicated loading WO3 first better utilized the oxygen vacancies on the TiF carrier promoting the generation of reduced vanadium species. In addition, loading WO3 first facilitated the dispersion of V2O5 thus enhanced the NH3 adsorption capacity of VWTiF. In situ DRIFT verified the rapid reaction between NO2, nitrate, and nitrite species and adsorbed NH3 over the VWTiF, confirming that the NH3 selective catalytic reduction (NH3-SCR) reaction over VWTiF at 240 °C proceeded by the Langmuir-Hinshelwood (L-H) mechanism. This research established the constitutive relationship between the loading order of V2O5 and WO3 and the denitration performance of the F-doped VWTi catalyst providing insights into the catalyst design process.

Solvothermal Guided V2O5 Microspherical Nanoparticles Constructing High-Performance Aqueous Zinc-Ion Batteries.

Rechargeable aqueous zinc-ion batteries have attracted a lot of attention owing to their cost effectiveness and plentiful resources, but less research has been conducted on the aspect of high volumetric energy density, which is crucial to the space available for the batteries in practical applications. In this work, highly crystalline V2O5 microspheres were self-assembled from one-dimensional V2O5 nanorod structures by a template-free solvothermal method, which were used as cathode materials for zinc-ion batteries with high performance, enabling fast ion transport, outstanding cycle stability and excellent rate capability, as well as a significant increase in tap density. Specifically, the V2O5 microspheres achieve a reversible specific capacity of 414.7 mAh g-1 at 0.1 A g-1, and show a long-term cycling stability retaining 76.5% after 3000 cycles at 2 A g-1. This work provides an efficient route for the synthesis of three-dimensional materials with stable structures, excellent electrochemical performance and high tap density.

Boosting Hydrogen Storage Performance of MgH2 by Oxygen Vacancy-Rich H-V2O5 Nanosheet as an Excited H-Pump.

MgH2 is a promising high-capacity solid-state hydrogen storage material, while its application is greatly hindered by the high desorption temperature and sluggish kinetics. Herein, intertwined 2D oxygen vacancy-rich V2O5 nanosheets (H-V2O5) are specifically designed and used as catalysts to improve the hydrogen storage properties of MgH2. The as-prepared MgH2-H-V2O5 composites exhibit low desorption temperatures (Tonset = 185 °C) with a hydrogen capacity of 6.54 wt%, fast kinetics (Ea = 84.55 ± 1.37 kJ mol-1 H2 for desorption), and long cycling stability. Impressively, hydrogen absorption can be achieved at a temperature as low as 30 °C with a capacity of 2.38 wt% within 60 min. Moreover, the composites maintain a capacity retention rate of ~ 99% after 100 cycles at 275 °C. Experimental studies and theoretical calculations demonstrate that the in-situ formed VH2/V catalysts, unique 2D structure of H-V2O5 nanosheets, and abundant oxygen vacancies positively contribute to the improved hydrogen sorption properties. Notably, the existence of oxygen vacancies plays a double role, which could not only directly accelerate the hydrogen ab/de-sorption rate of MgH2, but also indirectly affect the activity of the catalytic phase VH2/V, thereby further boosting the hydrogen storage performance of MgH2. This work highlights an oxygen vacancy excited "hydrogen pump" effect of VH2/V on the hydrogen sorption of Mg/MgH2. The strategy developed here may pave a new way toward the development of oxygen vacancy-rich transition metal oxides catalyzed hydride systems.

Evaluation of sensitivity of Extended Gate Field Effect Transistor -biosensor based on V2O5/GOx for glucose detection.

The sensing modified electrode was prepared using glucose oxidase immobilized onto vanadium pentoxide xerogel with glass/FTO as support electrode to evaluate the possibility to construct a V2O5/GOx Extended Gate Field Effect Transistor biosensor. Previously, our studies exhibited a sensitivity of V2O5 of 58.1 mV/pH. The use of Nafion® onto V2O5/GOx caused a decrease of mass loss after several cycles compared to the modified electrode without Nafion® during the EQCM and cyclic voltammetrics studies. Electrical characterization of V2O5/GOx demonstrated a tendency to stability after 200 s as a function of applied current. In presence of glucose and in different pH, the current decreased when the glucose concentration increased due to the lower active sites of enzyme. After ten voltammetric cycles, the total charge tends to structural stability. In pH = 5.0, the modified electrode based on V2O5/GOx Extended Gate Field Effect Transistor presented more tendency to sensitivity in different concentration of glucose.

Insight into the Critical Role of Oxygen Vacancies and V=O Bonds Length in V2O5 for Advanced Zinc Ion Storage.

Due to the larger sizes and stronger positive polarity of Zn2+ than dominant univalent ions, Zn2+ sluggish diffusion within V2O5 host electrodes is an essential issue in developing aqueous zinc-ion batteries (ZIBs) of higher energy densities. Herein, a high-performance V2O5 cathode was developed through subtly synthesizing and tuning V2O5 with oxygen vacancies-enriched and elongated apical V=O1 bond by altering the gradient concentration of hydrazine hydrate in the gas-solid reaction system. This strategy can enhance both intrinsic and extrinsic conductivity to a large extent. The electrochemical testing demonstrated the oxygen vacancies-enriched and elongated apical V=O1 bond can not only increase the intrinsic electronic conductivity of V2O5, but also induce additional pseudocapacitance to enhance the Zn2+ diffusion kinetics. We used infrared spectroscopy and Raman spectroscopy to characterize the change in the bond length structure of V2O5. Simultaneously, the long-term cyclability (capacity retention of 76.9 % after 1200 cycles at 4.0 A g-1) and rate capabilities (218 mAh g-1 at 4.0 A g-1) are promoted as well. We believe that our work might shed light on the bond length engineering of V2O5 and provide insights for the reasonable designing of novel cathodes for practical rechargeable ZIBs.

Weakly Polarized Organic Cation-Modified Hydrated Vanadium Oxides for High-Energy Efficiency Aqueous Zinc-Ion Batteries.

Vanadium oxides, particularly hydrated forms like V2O5·nH2O (VOH), stand out as promising cathode candidates for aqueous zinc ion batteries due to their adjustable layered structure, unique electronic characteristics, and high theoretical capacities. However, challenges such as vanadium dissolution, sluggish Zn2+ diffusion kinetics, and low operating voltage still hinder their direct application. In this study, we present a novel vanadium oxide ([C6H6N(CH3)3]1.08V8O20·0.06H2O, TMPA-VOH), developed by pre-inserting trimethylphenylammonium (TMPA+) cations into VOH. The incorporation of weakly polarized organic cations capitalizes on both ionic pre-intercalation and molecular pre-intercalation effects, resulting in a phase and morphology transition, an expansion of the interlayer distance, extrusion of weakly bonded interlayer water, and a substantial increase in V4+ content. These modifications synergistically reduce the electrostatic interactions between Zn2+ and the V-O lattice, enhancing structural stability and reaction kinetics during cycling. As a result, TMPA-VOH achieves an elevated open circuit voltage and operation voltage, exhibits a large specific capacity (451 mAh g-1 at 0.1 A g-1) coupled with high energy efficiency (89%), the significantly-reduced battery polarization, and outstanding rate capability and cycling stability. The concept introduced in this study holds great promise for the development of high-performance oxide-based energy storage materials.

Enhanced photocatalytic activity of V3O7 / V2O5 - reduced graphene oxide nanocomposite towards methylene blue dye degradation.

This work investigates the photocatalytic performance of V2O5 and V3O7 nanoparticles and their nanocomposites with rGO. The as-annealed V2O5 and V3O7 nanoparticles exhibited pure orthorhombic and monoclinic structures with an optical bandgap of 2.3 and 2.5 eV, respectively. The corresponding vibrational modes using Raman and FTIR spectroscopy analysis further confirm the form. The morphological studies reveal that V2O5 and V3O7 nanoparticles possess plate and petal-like morphology, respectively. Moreover, in the case of V2O5/V3O7-rGO nanocomposites, the plate/petal-like nanoparticles are embedded within rGO sheets. Incorporating nanoparticles within rGO sheets has quenched the green photoluminescence emission, enhancing their photocatalytic performance upon irradiation with white light of 100 mW/cm2. This is ascribed to the effective transport of interfacial electrons from vanadium oxide nanoparticles to the rGO surface, reducing the recombination of photogenerated charge carriers. These results indicate that the vanadium oxide/rGO nanocomposites have potential applications in wastewater treatment.

Bilayered nanostructured V2O5 nH2O xerogel constructed 2D nano-papers for efficient aqueous zinc/magnesium ion storage.

Aqueous zinc ion batteries (AZIBs) and aqueous magnesium ion batteries (AMIBs) offer powerful alternatives for large-scale energy storage because of their high safety and low cost. Consequently, the design of high-performance cathode materials is essential. In this paper, we present a simple strategy that combines oxygen defect (Od) engineering with a 2D-on-2D homogeneous nanopape-like bilayer V2O5 nH2O xerogel (BL-HVOd NPS). This strategy employs Od to improve Zn2+/Mg2+insertion/extraction kinetics and reduce irreversible processes for high-performance AZIBs/AMIBs. And interlayer water molecules serve as an effective spacer to stabilize the expanded interlayer gap in BL-HVOd NPS, thereby providing extended diffusion channels for Zn2+/Mg2+ during insertion/extraction. The interlayer water molecules help shield the electrostatic interaction between Zn2+/Mg2+ and BL-HVOd NPS lattice, which improves diffusion kinetics during repeated. In addition, electrochemical characterization results indicate that the BL-HVOd NPS can effectively the surface adsorption and internal diffusion of Zn2+/Mg2+. More importantly, the successfully prepared unique 2D-on-2D homogenous nanopaper structure enhances electrolyte/electrode contact and reduces the migration/diffusion path of electrons/Zn2+ and Mg2+, thus greatly improving rate performance. As a result, the BL-HVOd NPS as AZIBs/AMIBs electrodes offer better reversible capacity of 361.8 and 162.8 mA h g-1 (at 0.2 A g-1), while displaying impressively long cycle lifes. This method provides a way to prepare advanced xerogel cathode materials for AZIBs and AMIBs.

Highly Stable Photo-Assisted Zinc-Ion Batteries via Regulated Photo-Induced Proton Transfer.

Photo-assisted ion batteries utilize light to boost capacity but face cycling instability due to complex charge/ion transfer under illumination. This study identified photo-induced proton transfer (photo-induced PT) as a significant process in photo-(dis)charging of widely-used V2O5-based zinc-ion batteries, contributing to enhanced capacity under illumination but jeopardizing photo-stability. Photo-induced PT occurs at 100 ps after photo-excitation, inducing rapid proton extraction into V2O5 photoelectrode. This process creates a proton-deficient microenvironment on surface, leading to repetitive cathode dissolution and anode corrosion in each cycle. Enabling the intercalated protons from photo-induced PT to be reversibly employed in charge-discharge processes via the anode-alloying strategy achieves high photo-stability for the battery. Consequently, a ~54 % capacity enhancement was achieved in a V2O5-based zinc-ion battery under illumination, with ~90 % capacity retention after 4000 cycles. This extends the photo-stability record by 10 times. This study offers promising advancements in energy storage by addressing instability issues in photo-assisted ion batteries.

Nickel-doped vanadium pentoxide (Ni@V2O5) nanocomposite induces apoptosis targeting PI3K/AKT/mTOR signaling pathway in skin cancer: An in vitro and in vivo study.

In the present study, the vanadium pentoxide (V2O5) nickel-doped vanadium pentoxide (Ni@V2O5) was prepared and determined for in vitro anticancer activity. The structural characterization of the prepared V2O5 and Ni@V2O5 was determined using diverse morphological and spectroscopic analyses. The DRS-UV analysis displayed the absorbance at 215 nm for V2O5 and 331 nm for Ni@V2O5 as the primary validation of the synthesis of V2O5 and Ni@V2O5. The EDS spectra exhibited the presence of 30% of O, 69% of V, and 1% of Ni and the EDS mapping showed the constant dispersion. The FE-SEM and FE-TEM analysis showed the V2O5 nanoparticles are rectangle-shaped and nanocomposites have excellent interfaces between nickel and V2O5. The X-ray photoelectron spectroscopy (XPS) investigation of Ni@V2O5 nanocomposite endorses the occurrence of elements V, O, and Ni. The in vitro MTT assay clearly showed that the V2O5 and Ni@V2O5 have significantly inhibited the proliferation of B16F10 skin cancer cells. In addition, the nanocomposite produces the endogenous reactive oxygen species in the mitochondria, causes the mitochondrial membrane and nuclear damage, and consequently induces apoptosis by caspase 9/3 enzymatic activity in skin cancer cells. Also, the western blot analysis showed that the nanocomposite suppresses the oncogenic marker proteins such as PI3K, Akt, and mTOR in the skin cancer cells. Together, the results showed that Ni@V2O5 can be used as an auspicious anticancer agent against skin cancer.

Toward Simultaneous Dense Zinc Deposition and Broken Side-Reaction Loops in the Zn//V2 O5 System.

The Zn//V2 O5 system not only faces the incontrollable growth of zinc (Zn) dendrites, but also withstands the cross-talk effect of by-products produced from the cathode side to the Zn anode, inducing interelectrode talk and aggravating battery failure. To tackle these issues, we construct a rapid Zn2+ -conducting hydrogel electrolyte (R-ZSO) to achieve Zn deposition modulation and side reaction inhibition in Zn//V2 O5 full cells. The polymer matrix and BN exhibit a robust anchoring effect on SO4 2- , accelerating Zn2+ migration and enabling dense Zn deposition behavior. Therefore, the Zn//Zn symmetric cells based on the R-ZSO electrolyte can operate stably for more than 1500 h, which is six times higher than that of cells employing the blank electrolyte. More importantly, the R-ZSO hydrogel electrolyte effectively decouples the cross-talk effects, thus breaking the infinite loop of side reactions. As a result, the Zn//V2 O5 cells using this modified hydrogel electrolyte demonstrate stable operation over 1,000 cycles, with a capacity loss rate of only 0.028 % per cycle. Our study provides a promising gel chemistry, which offers a valuable guide for the construction of high-performance and multifunctional aqueous Zn-ion batteries.

Quasi-Solid-State All-V2O5 Battery.

Solid-state symmetrical battery represents a promising paradigm for future battery technology. However, its development is hindered by the deficiency of high-performance bipolar electrodes and compatible solid electrolytes. Herein, a quasi-solid-state all-V2O5 battery constructed by a binder-free carbon fabric-V2O5 nanowires@graphene (CVOG) bipolar electrode and a softly cross-linked polyethylene oxide-based solid polymer electrolyte (SPE) is reported. The synergetic effect of nano-structuring of V2O5, hierarchical conductive network, and graphene wrapping endows the CVOG electrode with boosted reaction kinetics and suppressed vanadium dissolution. The cathodic and anodic reactions of CVOG are decoupled by electrochemical analysis, conceiving the feasibility of constructing all-V2O5 full battery. In manifesting the solid-state all-V2O5 battery, the robust and elastic SPE exhibits high ionic conductivity, tight/self-adaptable electrolyte-electrode contact, and a low charge-transfer barrier. The resultant solid-state full battery exhibits a high reversible capacity of 158 mAh g-1 at 0.1 C, good capacity retention of over 61% from 0.1 C to 2 C, and remarkable cycling stability of 77% capacity retention after 1000 cycles at 1 C, which surpass other solid-state symmetrical batteries. Hence, this work provides a practice of high-performance solid-state batteries with symmetrical configuration and is constructive for next-generation battery technology.

Interfacial Chemistry in Aqueous Lithium-Ion Batteries: A Case Study of V2O5 in Dilute Aqueous Electrolytes.

Aqueous lithium-ion batteries (ALIBs) are promising for large-scale energy storage systems because of the cost-effective, intrinsically safe, and environmentally friendly properties of aqueous electrolytes. Practical application is however impeded by interfacial side-reactions and the narrow electrochemical stability window (ESW) of aqueous electrolytes. Even though higher electrolyte salt concentrations (e.g., water-in-salt electrolyte) enhance performance by widening the ESW, the nature and extent of side-reaction processes are debated and more fundamental understanding thereof is needed. Herein, the interfacial chemistry of one of the most popular electrode materials, V2O5, for aqueous batteries is systematically explored by a unique set of operando analytical techniques. By monitoring electrode/electrolyte interphase deposition, electrolyte pH, and gas evolution, the highly dynamic formation/dissolution of V2O5/V2O4, Li2CO3 and LiF during dis-/charge is demonstrated and shown to be coupled with electrolyte decomposition and conductive carbon oxidation, regardless of electrolyte salt concentration. The study provides deeper understanding of interfacial chemistry of active materials under variable proton activity in aqueous electrolytes, hence guiding the design of more effective electrode/electrolyte interfaces for ALIBs and beyond.

Constructing stable V2O5/V6O13 heterostructure interface with fast Zn2+ diffusion kinetics for ultralong lifespan zinc-ion batteries.

Given their plentiful reserves, impressive safety features, and economical pricing, aqueous zinc - ion batteries (ZIBs) have positioned themselves as strong competitors to lithium - ion batteries. Yet, the scarcity of available cathode materials poses a challenge to their continued development. In this study, a V2O5/V6O13 heterostructure has been synthesized using a one - pot hydrothermal approach and employed as the cathode material for ZIBs. As evidenced by both experimental and theoretical findings, V2O5/V6O13 heterostructure delivers a rapid electrons and ions diffusion kinetics promoted by the stable interface and strong electronic coupling with significant charge transfer between V2O5 and V6O13, as well as a stable interface achieved by adjusting V - O bond length. Consequently, the optimized V2O5/V6O13 heterostructure cathode of ZIBs demonstrates exceptional capacity (338 mAh g-1 at 0.1 A g-1), remarkable cycling stability (92.96 % retained after 1400 cycles at 1 A g-1). Through comprehensive theoretical calculations and ex situ characterization, the kinetic analysis and storage mechanism of Zn2+ are thoroughly investigated, providing a solid theoretical foundation for the advancement of novel V - based cathode materials aimed at enhancing the performance of ZIBs.