Theoretical study of adsorption of gas (CO, CO2, NH3) by metal (Au, Ag, Cu)-doped single-layer WS2.

CONTEXT: The adsorptions of gas (CO, CO2, NH3) by metal (Au, Ag, Cu)-doped single layer WS2 are studied by density functional theory. The doping of metal atoms makes WS2 behave as n-type semiconductors. The final adsorption sites for CO, CO2, and NH3 are close to the atomic sites of the doped metal. The adsorptions of CO and NH3 gases on Cu/WS2, Ag/WS2, and Au/WS2 are dominated by chemisorption. The doped metal atoms enhance the hybridization of the substrate with the gas molecular orbitals, which contributes to the charge transfer and enhances the adsorption of the gas with the material surface. The adsorptions of CO and NH3 on Cu/WS2 and Ag/WS2 allow favorable desorption in a short time after heating. The single-layer Cu/WS2 is proved to have the potential to be used as a reliable recyclable sensor for CO. This work provides a theoretical basis for developing high-performance WS2-based gas sensors. METHODS: In this paper, the adsorption energy, electronic structure, charge transfer, and recovery time of CO, CO2, and NH3 in the doped system have been investigated based on the CASTEP code of density functional theory. The exchange correlation function used is the Perdew-Burke-Ernzerhof (PBE) generalized gradient approximation (GGA). The TS (Tkatchenko-Scheffler) dispersion correction method was used to involve the effects of van der Waals interaction on the adsorption energies for all adsorption system. The ultrasoft pseudopotentials are chosen and the plane-wave cut-off energies are set to 500 eV. The k-point mesh generated by the Monkhorst package scheme is used to perform the numerical integration of the Brillouin zone and 5 × 5 × 1 k-point grid is used. The tolerances of total energy convergence, maximum ionic force, ionic displacement, and stress component are 1.0 × 10-5 eV/atom, 0.03 eV/Å, 0.001 Å, and 0.05 GPa, respectively.

Chemically Tailored Growth of 2D Semiconductors via Hybrid Metal-Organic Chemical Vapor Deposition.

Two-dimensional (2D) semiconducting transition-metal dichalcogenides (TMDCs) are an exciting platform for excitonic physics and next-generation electronics, creating a strong demand to understand their growth, doping, and heterostructures. Despite significant progress in solid-source (SS-) and metal-organic chemical vapor deposition (MOCVD), further optimization is necessary to grow highly crystalline 2D TMDCs with controlled doping. Here, we report a hybrid MOCVD growth method that combines liquid-phase metal precursor deposition and vapor-phase organo-chalcogen delivery to leverage the advantages of both MOCVD and SS-CVD. Using our hybrid approach, we demonstrate WS2 growth with tunable morphologies─from separated single-crystal domains to continuous monolayer films─on a variety of substrates, including sapphire, SiO2, and Au. These WS2 films exhibit narrow neutral exciton photoluminescence line widths down to 27-28 meV and room-temperature mobility up to 34-36 cm2 V-1 s-1. Through simple modifications to the liquid precursor composition, we demonstrate the growth of V-doped WS2, MoxW1-xS2 alloys, and in-plane WS2-MoS2 heterostructures. This work presents an efficient approach for addressing a variety of TMDC synthesis needs on a laboratory scale.

High-Yield WS2 Synthesis through Sulfurization in Custom-Modified Atmospheric Pressure Chemical Vapor Deposition Reactor, Paving the Way for Selective NH3 Vapor Detection.

Nanostructured transition metal dichalcogenides have garnered significant research interest for physical and chemical sensing applications due to their unique crystal structure and large effective surface area. However, the high-yield synthesis of these materials on different substrates and in nanostructured films remains a challenge that hinders their real-world applications. In this work, we demonstrate the synthesis of two-dimensional (2D) tungsten disulfide (WS2) sheets on a hundred-milligram scale by sulfurization of tungsten trioxide (WO3) powder in an atmospheric pressure chemical vapor deposition reactor. The as-synthesized WS2 powders can be formulated into inks and deposited on a broad range of substrates using techniques like screen or inkjet printing, spin-coating, drop-casting, or airbrushing. Structural, morphological, and chemical composition analysis confirm the successful synthesis of edge-enriched WS2 sheets. The sensing performance of the WS2 films prepared with the synthesized 2D material was evaluated for ammonia (NH3) detection at different operating temperatures. The results reveal exceptional gas sensing responses, with the sensors showing a 100% response toward 5 ppm of NH3 at 150 °C. The sensor detection limit was experimentally verified to be below 1 ppm of NH3 at 150 °C. Selectivity tests demonstrated the high selectivity of the edge-enriched WS2 films toward NH3 in the presence of interfering gases like CO, benzene, H2, and NO2. Furthermore, the sensors displayed remarkable stability against high levels of humidity, with only a slight decrease in response from 100% in dry air to 93% in humid environments. Density functional theory and Bayesian optimization simulations were performed, and the theoretical results agree with the experimental findings, revealing that the interaction between gas molecules and WS2 is primarily based on physisorption.

Helicity-Resolved Vibrational Coupling in Twist WS2/WSe2 Heterostructures.

Helicity-resolved Raman spectra can provide an intricate view into lattice structural details. Through the analysis of peak positions, intensities, and circular polarized Raman signals, a wealth of information about chiral structure arrangement within the moiré superlattice, interlayer interaction strength, polarizability change in chemical bond, and beyond can be unveiled. However, the relationship between the circular polarization of high-frequency Raman and twist angle is still not clear. Here, we utilize helicity-resolved Raman spectroscopy to explore the interlayer interactions and the effect of the moiré superlattice in WS2/WSe2 heterostructures. For the out-of-plane Raman mode A1g of WS2 (A1g and 1E2g of WSe2), its intensity is significantly enhanced (suppressed) in WS2/WSe2 heterostructures when θ is less than 10° or greater than 50°. This observation could be attributed to the large polarizability changes in both W-S and W-Se covalent bonds. The circular polarization of 2LA(M) in WSe2 of the WS2/WSe2 heterostructure (θ < 10° or θ > 50°) is significantly enhanced compared to that of 2LA(M) in the monolayer WSe2. We deduce that the circular polarization of the Raman mode correlates with the proportion of high-symmetry area within a supercell of the moiré lattice. Our findings improve the understanding of twist-angle-modulated Raman modes in TMD heterostructures.

Atomic-Thin WS2 Kirigami for Bidirectional Polarization Detection.

The assembly and patterning engineering in two-dimensional (2D) materials hold importance for chip-level designs incorporating multifunctional detectors. At present, the patterning and stacking methods of 2D materials inevitably introduce impurity instability and functional limitations. Here, the space-confined chemical vapor deposition method is employed to achieve state-of-the-art kirigami structures of self-assembled WS2, featuring various layer combinations and stacking configurations. With this technique as a foundation, the WS2 nano-kirigami is integrated with metasurface design, achieving a photodetector with bidirectional polarization-sensitive detection capability in the infrared spectrum. Nano-kirigami can eliminate some of the uncontrollable factors in the processing of 2D material devices, providing a freely designed platform for chip-level multifunctional detection across multiple modules.

Giant Second Harmonic Generation in Supertwisted WS2 Spirals Grown in Step-Edge Particle-Induced Non-Euclidean Surfaces.

In moiré crystals resulting from the stacking of twisted two-dimensional (2D) layered materials, a subtle adjustment in the twist angle surprisingly gives rise to a wide range of correlated optical and electrical properties. Herein, we report the synthesis of supertwisted WS2 spirals and the observation of giant second harmonic generation (SHG) in these spirals. Supertwisted WS2 spirals featuring different twist angles are synthesized on a Euclidean or step-edge particle-induced non-Euclidean surface using carefully designed water-assisted chemical vapor deposition. We observed an oscillatory dependence of SHG intensity on layer number, attributed to atomically phase-matched nonlinear dipoles within layers of supertwisted spiral crystals where inversion symmetry is restored. Through an investigation into the twist angle evolution of SHG intensity, we discovered that the stacking model between layers plays a crucial role in determining the nonlinearity, and the SHG signals in supertwisted spirals exhibit enhancements by a factor of 2 to 136 when compared with the SHG of the single-layer structure. These findings provide helpful perspectives on the rational growth of 2D twisted structures and the implementation of twist angle adjustable endowing them great potential for exploring strong coupling correlation physics and applications in the field of twistronics.

Ultrasonic-Driven Degradation of Organic Pollutants Using Piezoelectric Catalysts WS2/Bi2WO6 Heterojunction Composites.

Water pollution has been made worse by the widespread use of organic dyes and their discharge, which has coincided with the industry's rapid development. Piezoelectric catalysis, as an effective wastewater purification method with promising applications, can enhance the catalyst activity by collecting tiny vibrations in nature and is not limited by sunlight. In this work, we designed and synthesized intriguing WS2/Bi2WO6 heterojunction nanocomposites, investigated their shape, structure, and piezoelectric characteristics using a range of characterization techniques, and used ultrasound to accelerate the organic dye Rhodamine B (RhB) degradation in wastewater. In comparison to the pristine monomaterials, the results demonstrated that the heterojunction composites demonstrated excellent degradation and stability of RhB under ultrasonic circumstances. The existence of heterojunctions and the internal piezoelectric field created by ultrasonic driving work in concert to boost catalytic performance, and the organic dye's rate of degradation is further accelerated by the carriers that are mutually transferred between the composites.

The effect of strain effect on WS2 monolayer as a potential delivery carrier for anti-myocardial infarction drug: First-principles study.

CONTEXT: Myocardial infarction is one of the major health challenges. It is of great significance to develop potential delivery carriers for new anti-myocardial infarction drugs. In this paper, based on first-principles calculations, monolayer WS2 with excellent photoelectric properties was verified as a carrier for the anti-myocardial infarction drug amiodarone (AMD). Studies have shown that the WS2-adsorbed AMD system (WS2@AMD) maintains structural stability and produces an adsorption energy of-2.12 eV. Mulliken charge analysis shows that electrons are transferred from WS2 atoms to AMD atoms. Among them, C, N and O obtained the maximum values of 0.51,0.37 and 0.56 e electrons, respectively, while H and I lost the maximum values of 0.32 and 0.24 e electrons, respectively. The optical response of WS2 adsorbed AMD system is similar to that of WS2. The light absorption coefficients of the two materials in the near ultraviolet region and the visible region can reach the order of 105 cm-1 and 104 cm-1, and the strain makes the light absorption peak red-shifted. The feasibility of temperature-controlled release mechanism of WS2 as AMD carrier was discussed. This theoretical work helps to improve the performance of two-dimensional nanomaterials and make them better as drug delivery carriers to improve the therapeutic effect of myocardial infarction. These results indicate that the WS2 monolayer has potential applications in the development of drug delivery carriers. METHODS: In this study, based on first-principles calculations, the CASTEP simulation software package was used to study the structure and properties of materials. The interaction between electrons and ions is considered by using Ultrasoft pseudopotentials. In order to eliminate the spurious interaction between adjacent structures caused by periodic calculations, a vacuum space no less than 18 Å is placed in the vertical direction if necessary. Different functions may produce different density functional calculation results. Due to the low sensitivity of the crystal structure to the calculation details, the PBE functional under the generalized gradient approximation (GGA) was initially used for structural optimization, and the energy cutoff value was set to 500 eV. Grimme 's dispersion correction was used to make the results more accurate. The Brillouin zone (BZ) is sampled by a 7 × 7 × 1 K-point grid to ensure the reliability of the original lattice calculation. The lattice vector and atomic coordinates are relaxed, and the tolerance of each atom is less than 0.01 eV/Å. The energy tolerance at the atomic position is less than 10-7 eV/atom. When calculating the band gap, the HSE06 hybrid functional is used to modify the optimized structure of the PBE functional to obtain more accurate results. Spin-polarized DFT calculations were performed to calculate the electronic structure.

Hierarchical WS2-WO3 Nanohybrids with Flower-like p-n Heterostructures for Trimethylamine Detection.

The detection of trimethylamine (TMA) is critically important due to its toxic and flammable nature, which poses significant risks to human health and the environment. However, achieving high response, rapid kinetics, selectivity, and low operating temperatures in TMA sensing remains challenging. In this study, WS2/WO3 nanohybrids with flower-like hierarchical structures were synthesized via an in situ sulfurization process, utilizing varying amounts of thioacetamide to control the sulfurization state of WO3. These novel hierarchical WS2/WO3 nanohybrids exhibit remarkable selectivity towards TMA, as well as rapid response and recovery characteristics. Specially, the optimal WS2/WO3 sensor, composed of 5% WS2/WO3 nanohybrids, demonstrates exceptional TMA sensing performance, including a high response (19.45 at 10 ppm), good repeatability, reliable long-term stability, and a low theoretical detection limit (15.96 ppb). The superior sensing capabilities of the WS2/WO3 nanohybrids are attributed to the formation of p-n heterojunctions at the interface, the unique hierarchical structures, and the catalytic activity of WS2. Overall, this work provides a straightforward and versatile approach for synthesizing multifunctional nanomaterials by combining metal oxide micro-flowers with transition metal dichalcogenide nanoflakes for applications in monitoring TMA in complex environments.

Dual First and Second Surface Solar Mirrors of Polished WS2 and Silver by Dynamical Chemical Plating Technique on Polycarbonate.

This work proposes for the first time protecting-reflecting on both sides of plated mirrors and a solution to polycarbonate surface vulnerability to weathering and scratching using tungsten disulfide (WS2) by mechanical polishing. The ability of the dynamic chemical plating (DCP) technique to deposit Ag films at the nanometer scale on a polycarbonate (PC) substrate and its characteristics to be metallized is also shown. These deposits hold significant promise for concentrated solar power (CSP) applications. Complementarily, the application of WS2 as a reflective film for CSP by mechanical polishing on smooth polycarbonate surfaces is both novel and practical. This technique is innovative and scalable without needing reactants or electrical potential, making it highly applicable in real-world scenarios, including, potentially, on-site maintenance. The effects of surface morphology and adhesion, and the reflectivity parameters of the silver metallic surfaces were investigated. Wettability was investigated because it is important for polymeric surfaces in the activation and metal deposition immediately after redox reactions. The flame technique improved wettability by modifying the surface with carbonyl and carboxyl functional groups, with PC among the few industrial polymers that resisted such a part of the process. The change in the chemical composition, roughness, and wettability of the surfaces effectively improved the adhesion between the Ag film and the PC substrate. However, it did not significantly affect the adhesion between PC and WS2 and showed its possible implementation as a first surface mirror. Overall, this work provides a scalable, innovative method for improving the durability and reflectivity of polycarbonate-based mirrors, with significant implications for CSP applications.

Atomically thin-layered WS2based resistive sensors for detection of CO and NO2at room temperature.

The number of layers present in a two-dimensional (2D) nanomaterial plays a critical role in applications that involve surface interaction, for example, gas sensing. This paper reports the synthesis of 2D WS2nanoflakes using the facile liquid exfoliation technique. The nanoflakes were exfoliated using bath sonication (BS-WS2) and probe sonication (PS-WS2). The thickness of the BS-WS2was found to range between 70 and 200 nm, and that of PS-WS2varied from 0.6 to 80 nm, indicating the presence of single to few layers of WS2when characterized using atomic force microscope. All the WS2samples were thoroughly characterized using electron microscopes, x-ray diffractometer, Raman spectroscopy, UV-Visible spectroscopy, Fourier transform infrared spectroscope, and thermogravimetric analyser. Both the nanostructured samples were exposed to 2 ppm of NO2at room temperature. Interestingly, BS-WS2which comprises of a greater number of WS2layers exhibited -14.2% response as against -3.4% response of PS-WS2, the atomically thin sample. The BS-WS2sample was found to be highly selective towards NO2but was slower (with incomplete recovery) as compared to PS-WS2. The PS-WS2sample was observed to exhibit -11.9% to -27.4% response to 2-10 ppm of CO and -3.4%-35.2% response to 2-10 ppm of NO2at room temperature, thereby exhibiting the potential to detect two gases simultaneously. These gases could be accurately predicted and quantified if the response times of the PS-WS2sample were considered. The atomically thin WS2-based sensor exhibited a limit of detection of 131 and 81 ppb for CO and NO2, respectively.

Nanotubes from Transition Metal Dichalcogenides: Recent Progress in the Synthesis, Characterization and Electrooptical Properties.

Inorganic layered compounds (2D-materials), particularly transition metal dichalcogenide (TMDC), are the focus of intensive research in recent years. Shortly after the discovery of carbon nanotubes (CNTs) in 1991, it was hypothesized that nanostructures of 2D-materials can also fold and seam forming, thereby nanotubes (NTs). Indeed, nanotubes (and fullerene-like nanoparticles) of WS2 and subsequently from MoS2 were reported shortly after CNT. However, TMDC nanotubes received much less attention than CNT until recently, likely because they cannot be easily produced as single wall nanotubes with well-defined chiral angles. Nonetheless, NTs from inorganic layered compounds have become a fertile field of research in recent years. Much progress has been achieved in the high-temperature synthesis of TMDC nanotubes of different kinds, as well as their characterization and the study of their properties and potential applications. Their multiwall structure is found to be a blessing rather than a curse, leading to intriguing observations. This concise minireview is dedicated to the recent progress in the research of TMDC nanotubes. After reviewing the progress in their synthesis and structural characterization, their contributions to the research fields of energy conversion and storage, polymer nanocomposites, andunique optoelectronic devices are being reviewed. These studies suggest numerous potential applications for TMDC nanotubes in various technologies, which are briefly discussed.

Control of Hybrid Exciton Lifetime in MoSe2/WS2 Moiré Heterostructures.

Hybrid excitons, characterized by their strong oscillation strength and long lifetimes, hold great potential as information carriers in semiconductors. They offer promising applications in exciton-based devices and circuits. MoSe2/WS2 heterostructures represent an ideal platform for studying hybrid excitons, but how to regulate the exciton lifetime has not yet been explored. In this study, layer hybridization is modulated by applying electric fields parallel or antiparallel to the dipole moment, enabling us to regulate the exciton lifetime from 1.36 to 4.60 ns. Furthermore, the time-resolved photoluminescence decay traces are measured at different excitation power. A hybrid exciton annihilation rate of 8.9 × 10-4 cm2 s-1 is obtained by fitting. This work reveals the effects of electric fields and excitation power on the lifetime of hybrid excitons in MoSe2/WS2 1.5° moiré heterostructures, which play important roles in high photoluminescence quantum yield optoelectronic devices based on transition-metal dichalcogenides heterostructures.

Intermixing of MoS2 and WS2 photocatalysts toward methylene blue photodegradation.

Visible-light-driven photocatalysis using layered materials has garnered increasing attention regarding the degradation of organic dyes. Herein, transition-metal dichalcogenides MoS2 and WS2 prepared by chemical vapor deposition as well as their intermixing are evaluated for photodegradation (PD) of methylene blue under solar simulator irradiation. Our findings revealed that WS2 exhibited the highest PD efficiency of 67.6% and achieved an impressive PD rate constant of 6.1 × 10-3 min-1. Conversely, MoS2 displayed a somewhat lower PD performance of 43.5% but demonstrated remarkable stability. The intriguing result of this study relies on the synergetic effect observed when both MoS2 and WS2 are combined in a ratio of 20% of MoS2 and 80% of WS2. This precise blend resulted in an optimized PD efficiency and exceptional stability reaching 97% upon several cycles. This finding underscores the advantageous outcomes of intermixing WS2 and MoS2, shedding light on the development of an efficient and enduring photocatalyst for visible-light-driven photodegradation of methylene blue.

High-performance flexible piezoelectric nanogenerator assisted by a three-phase PVDF/WS2/rGO nanocomposite.

The emergence of piezoelectric nanogenerators (PENGs) presents a promising alternative to supply energy demands within the realms of portable and miniaturized devices. In this article, the role of 2D transition metal dichalcogenide tungsten sulfide (WS2) and conductive rGO sheets as filler materials inside the polyvinylidene fluoride (PVDF) matrix on piezoelectric performances has been investigated extensively. The strong electrostatic interaction between C-F and C-H monomer bonds of PVDF interacted with the large surface area of the WS2nanosheets, increasing the electroactive polar phases and resulting in enhanced ferroelectricity in the PVDF/WS2nanocomposite. Further, the inclusion of rGO sheets in the PVDF/WS2composite allows mobile charge carriers to move freely through the conductive network provided by the rGO basal planes, which improves the internal polarization of the PVDF/WS2/rGO nanocomposites and increases the electrical performance of the PENGs. The PVDF/WS2/0.3rGO nanocomposite-based PENG exhibits maximum piezoresponses with ∼8.1 times enhancements in the output power density than the bare PVDF-based PENG. The mechanism behind the enhanced piezoresponses in the PVDF/WS2/rGO nanocomposites has been discussed.

Sandwiched WS2/MoTe2/WS2 Heterostructure with a Completely Depleted Interlayer for a Photodetector with Outstanding Detectivity.

Photodetectors based on two-dimensional van der Waals (2D vdW) heterostructures with high detectivity and rapid response have emerged as promising candidates for next-generation imaging applications. However, the practical application of currently studied 2D vdW heterostructures faces challenges related to insufficient light absorption and inadequate separation of photocarriers. To address these challenges, we present a sandwiched WS2/MoTe2/WS2 heterostructure with a completely depleted interlayer, integrated on a mirror electrode, for a highly efficient photodetector. This well-designed structure enhances light-matter interactions while facilitating effective separation and rapid collection of photocarriers. The resulting photodetector exhibits a broadband photoresponse spanning from deep ultraviolet to near-infrared wavelengths. When operated in self-powered mode, the device demonstrates an exceptional response speed of 22/34 µs, along with an impressive detectivity of 8.27 × 1010 Jones under 635 nm illumination. Additionally, by applying a bias voltage of -1 V, the detectivity can be further increased to 1.49 × 1012 Jones, while still maintaining a rapid response speed of 180/190 µs. Leveraging these outstanding performance metrics, high-resolution visible-near-infrared light imaging has been successfully demonstrated using this device. Our findings provide valuable insights into the optimization of device architecture for diverse photoelectric applications.

Visualizing and Controlling of Photogenerated Electron-Hole Pair Separation in Monolayer WS2 Nanobubbles under Piezoelectric Field.

The piezoelectric properties of two-dimensional semiconductor nanobubbles present remarkable potential for application in flexible optoelectronic devices, and the piezoelectric field has emerged as an efficacious pathway for both the separation and migration of photogenerated electron-hole pairs, along with inhibition of recombination. However, the comprehension and control of photogenerated carrier dynamics within nanobubbles still remain inadequate. Hence, this study is dedicated to underscore the importance of in situ detection and detailed characterization of photogenerated electron-hole pairs in nanobubbles to enrich understanding and strategic manipulation in two-dimensional semiconductor materials. Utilizing frequency modulation kelvin probe force microscopy (FM-KPFM) and strain gradient distribution techniques, the existence of a piezoelectric field in monolayer WS2 nanobubbles was confirmed. Combining w/o and with illumination FM-KPFM, second-order capacitance gradient technique and in situ nanoscale tip-enhanced photoluminescence characterization techniques, the interrelationships among the piezoelectric effect, interlayer carrier transfer, and the funneling effect for photocarrier dynamics process across various nanobubble sizes were revealed. Notably, for a WS2/graphene bubble height of 15.45 nm, a 0 mV surface potential difference was recorded in the bubble region w/o and with illumination, indicating a mutual offset of piezoelectric effect, interlayer carrier transfer, and the funneling effect. This phenomenon is prevalent in transition metal dichalcogenides materials exhibiting inversion symmetry breaking. The implication of our study is profound for advancing the understanding of the dynamics of photogenerated electron-hole pair in nonuniform strain piezoelectric systems, and offers a reliable framework for the separation and modulation of photogenerated electron-hole pair in flexible optoelectronic devices and photocatalytic applications.

Application of the Knife-Edge Technique on Transition Metal Dichalcogenide Monolayers for Resolution Assessment of Nonlinear Microscopy Modalities.

We report application of the knife-edge technique at the sharp edges of WS2 and MoS2 monolayer flakes for lateral and axial resolution assessment in all three modalities of nonlinear laser scanning microscopy: two-photon excited fluorescence (TPEF), second- and third-harmonic generation (SHG, THG) imaging. This technique provides a high signal-to-noise ratio, no photobleaching effect and shows good agreement with standard resolution measurement techniques. Furthermore, we assessed both the lateral resolution in TPEF imaging modality and the axial resolution in SHG and THG imaging modality directly via the full-width at half maximum parameter of the corresponding Gaussian distribution. We comprehensively analyzed the factors influencing the resolution, such as the numerical aperture, the excitation wavelength and the refractive index of the embedding medium for the different imaging modalities. Glycerin was identified as the optimal embedding medium for achieving resolutions closest to the theoretical limit. The proposed use of WS2 and MoS2 monolayer flakes emerged as promising tools for characterization of nonlinear imaging systems.

Organic-Inorganic Rubrene/WS2 Heterostructure for Broadband Detection and Polarization Imaging.

Organic single crystals exhibit improved carrier mobility, longer exciton diffusion length, anisotropic charge transport, and unique linear dichroism, while its high exciton binding energy seriously limits the free-carrier generation and photoelectric conversion efficiency. Layered van der Waals heterostructures, which integrate organic crystals with high mobility two-dimensional (2D) inorganic semiconductors, are promising for promoting exciton dissociation and boosting sensitivity by utilizing the interfacial potential and photogating effect. In this work, organic single-crystal rubrene is integrated with a few-layer WS2 to design the high-performance photodetector. The device exhibits an excellent responsivity of 1000 A W-1, and a fast speed of 180 µs, which is far superior to the individual WS2 device. Equally importantly, this device provides excellent polarization detection performance by virtue of the anisotropic properties of rubrene, and the dichroic ratios are 1.56, 1.5, and 1.7 for 375, 405, and 658 nm irradiation, respectively. Finally, several high-resolution single-pixel broadband polarization imaging was demonstrated. Our work shows that organic-inorganic heterostructure is an essential candidate for improving optoelectronics performance and has potential for polarization imaging.

Wafer scale WS2based ultrafast photosensing and memory computing devices for neuromorphic computing.

Integration of optical sensors with memristors can establish the bridge between photosensing and memory devices for Internet of Things (IoT) based applications. This paper presents the realization of integrated sensing and computing memory (ISCM) devices using tungsten disulfide (WS2) and their application for neuromorphic computing. The ISCM device fabrication process is scalable as microfabrication steps followed on 2″ wafer, ISCM device testing and image classification for neuromorphic computing. The photosensing/memory tests were conducted using electrical and optical stimulations (broadband spectrum). The fabricated photosensing device offers a higher responsivity (8 A W-1), higher detectivity (2.85 × 1011Jones) and fast response speed (80.2/78.3µs) at 950 nm. The memory device has shown a set/reset time of 51.6/73.5µs respectively. Further, the repeatability, stability and reproducibility tests were conducted by stimulating the device with different modulating frequencies. The frequency modulation tests confirm that the ISCM devices are stable and perfect candidate for real-time IoT applications. Moreover, the device's potentiation and depression results were used for image classification with the accuracy of 98.27%. These demonstrated device's test results provide possibilities to fabricate the smart sensors with integrated functionalities.