Energy and throughput aware adequate routing for wireless sensor networks using integrated game theory method.

A Wireless Sensor Network (WSN) is usually made up of a large number of discrete sensor nodes, each of which requires restricted resources, including memory, computing power, and energy. To extend the network lifetime, these limited resources must be used effectively. In WSN, clustering constitutes one of the best methods for optimizing network longevity and energy conservation. In this work, we proposed a novel Energy and Throughput Aware Adaptive Routing (ETAAR) algorithm based on Cooperative Game Theory (CGT). To achieve the energy efficient and improved data rate routing in WSN, we are applied two game theories of CGT and coalition game. The main part of this routing mechanism is cluster head selection and clustering the nodes to perform energy efficient and throughput effective communication between the nodes. In first stage, CGT based utility function which adopts both energy and throughput is utilized to handpick the CH nodes. In the second stage, along with the energy and throughput, average end-to-end delay is considered for the adaptive time slot transmission to avoid collision in the coalition game approach. MATLAB tool is used for simulation. The simulation results shows that the proposed ETAAR protocol is outperforms than earlier works of routing in terms of residual energy, PDR, energy due ratio, average end-to-end delay, dead nodes. The network lifetime of 48% extension, energy saving of 60% and 52.5% of delay shortage attained in ETAAR.

ANN-Based Bridge Support Fixity Quantification Using Thermal Response Data from Real-Time Wireless Sensing.

Bridges are critical infrastructures that support our economic activities and daily lives. Aging bridges have been a major issue for decades, prompting researchers to improve resilience and performance through structural health monitoring. While most research focuses on superstructure damage, the majority of bridge failures are associated with support or joint damages, indicating the importance of bridge support. Indeed, bridge support affects the performance of both the substructure and superstructure by maintaining the load path and allowing certain movements to mitigate thermal and other stresses. The support deterioration leads to a change in fixity in the superstructure, compromising the bridge's integrity and safety. Hence, a reliable method to determine support fixity level is essential to detecting bearing health and enhancing the accuracy of the bridge health monitoring system. However, such research is lacking because of its complexity. In this study, we developed a support fixity quantification method based on thermal responses using an Artificial Neural Network (ANN) model. A finite element (FE) model of a representative highway bridge is used to derive thermal displacement data under different bearing stiffnesses, superstructure damage, and thermal loading. The thermal displacement behavior of the bridge under different support fixity conditions is presented, and the model is trained on the simulated response. The performance of the developed FE model and ANN was validated with field monitoring data collected from two in-service bridges in Connecticut using a real-time Wireless Sensor Network (WSN). Finally, the support stiffnesses of both bridges were predicted using the ANN model for validation.

Bio-Inspired Energy-Efficient Cluster-Based Routing Protocol for the IoT in Disaster Scenarios.

The Internet of Things (IoT) is a promising technology for sensing and monitoring the environment to reduce disaster impact. Energy is one of the major concerns for IoT devices, as sensors used in IoT devices are battery-operated. Thus, it is important to reduce energy consumption, especially during data transmission in disaster-prone situations. Clustering-based communication helps reduce a node's energy decay during data transmission and enhances network lifetime. Many hybrid combination algorithms have been proposed for clustering and routing protocols to improve network lifetime in disaster scenarios. However, the performance of these protocols varies widely based on the underlying network configuration and the optimisation parameters considered. In this research, we used the clustering parameters most relevant to disaster scenarios, such as the node's residual energy, distance to sink, and network coverage. We then proposed the bio-inspired hybrid BOA-PSO algorithm, where the Butterfly Optimisation Algorithm (BOA) is used for clustering and Particle Swarm Optimisation (PSO) is used for the routing protocol. The performance of the proposed algorithm was compared with that of various benchmark protocols: LEACH, DEEC, PSO, PSO-GA, and PSO-HAS. Residual energy, network throughput, and network lifetime were considered performance metrics. The simulation results demonstrate that the proposed algorithm effectively conserves residual energy, achieving more than a 17% improvement for short-range scenarios and a 10% improvement for long-range scenarios. In terms of throughput, the proposed method delivers a 60% performance enhancement compared to LEACH, a 53% enhancement compared to DEEC, and a 37% enhancement compared to PSO. Additionally, the proposed method results in a 60% reduction in packet drops compared to LEACH and DEEC, and a 30% reduction compared to PSO. It increases network lifetime by 10-20% compared to the benchmark algorithms.

Efficient security level in wireless sensor networks (WSNs) using four-factors authentication over the Internet of Things (IoT).

With the increasing demand for the use of technology in all matters of daily life and business, the demand has increased dramatically to transform business electronically especially regards COVID-19. The Internet of Things (IoT) has greatly helped in accomplishing tasks. For example, at a high temperature, it would be possible to switch on the air conditioner using a personal mobile device while the person is in the car. The Internet of Things (IoT) eases lots of tasks. A wireless sensor network is an example of IoT. Wireless sensor network (WSN) is an infrastructure less self-configured that can monitor environmental conditions such as vibration, temperature, wind speed, sound, pressure, and vital signs. Thus, WSNs can occur in many fields. Smart homes give a good example of that. The security concern is important, and it is an essential requirement to ensure secure data. Different attacks and privacy concerns can affect the data. Authentication is the first defence line against threats and attacks. This study proposed a new protocol based on using four factors of authentication to improve the security level in WSN to secure communications. The simulation results prove the strength of the proposed method which reflects the importance of the usage of such protocol in authentication areas.

Energy-efficient quad tree-based clustering using edge-assisted UAV-relay to enhance network lifetime in WSN.

Wireless sensor networks' most prominent concern is energy optimization. It faces significant problems like high energy consumption, data loss, delay, and low network lifetime. To improve, it uses clustering. However, during clustering, coverage holes are most likely to appear near the network's edge, within the cluster, and between clusters. As a result, there are more energy holes and dead nodes; therefore, the goal of this work is to maximize node network lifetime and minimize energy consumption during data transmission in the wireless sensor network (WSN). The proposed work includes three entities: sensor nodes, an edge-assisted unmanned aerial vehicle (UAV), and a base station. It uses an edge-assisted unmanned aerial vehicle to provide additional resources to the UAV, which helps reduce energy consumption during data transmission. This research proposes using communication to enhance the speed and bandwidth of data transmission and reduce transmission latency. This work attempts to improve performance by increasing throughput.

Connect attack in IoT-WSN detect through cyclic analysis based on forward and backward elimination.

IoT-wireless sensor networks (WSN) have extensive applications in diverse fields such as battlegrounds, commercial sectors, habitat monitoring, buildings, smart homes, and traffic surveillance. WSNs are susceptible to various types of attacks, such as malicious attacks, false data injection attacks, traffic attacks, and HTTP flood attacks. CONNECT attack is a novel attack in WSN. CONNECT attack plays a crucial role through disrupting packet transmission and node connections and significantly impacts CPU performance. Detecting and preventing CONNECT attacks is imperative for enhancing WSN efficiency. During a CONNECT attack, nodes fail to respond to legitimate requests, resulting in connectivity delays, acknowledgment delays, and packet drop attacks in IoT-WSN nodes. This article introduces an Intrusion Detection Algorithm based on the Cyclic Analysis Method (CAM), which incorporates a forward selection approach and backward elimination method. CAM analyzes routing information and behavior within the WSN, facilitating the identification of malicious paths and nodes. The proposed approach aims to pinpoint and mitigate the risks associated with CONNECT attacks, emphasizing the identification of malevolent pathways and nodes while establishing multiple disjoint loop-free routes for seamless data delivery in the IoT-WSN. Furthermore, the performance of CAM is assessed based on metrics such as malicious node detection accuracy, connectivity, packet loss, and network traffic. Simulation results using Matlab software demonstrate superior accuracy in malicious node detection, achieving accuracy in attack detection of approximately 99%, surpassing traditional algorithms accuracy of attack detection.

Energy optimization for wireless sensor network using minimum redundancy maximum relevance feature selection and classification techniques.

In wireless sensor networks (WSN), conserving energy is usually a basic issue, and several approaches are applied to optimize energy consumption. In this article, we adopt feature selection approaches by using minimum redundancy maximum relevance (MRMR) as a feature selection technique to minimize the number of sensors thereby conserving energy. MRMR ranks the sensors according to their significance. The selected features are then classified by different types of classifiers; SVM with linear kernel classifier, naïve Bayes classifier, and k-nearest neighbors classifier (KNN) to compare accuracy values. The simulation results illustrated an improvement in the lifetime extension factor of sensors and showed that the KNN classifier gives better results than the naïve Bayes and SVM classifier.

Deploying Wireless Sensor Networks in Multi-Story Buildings toward Internet of Things-Based Intelligent Environments: An Empirical Study.

With the growing integration of the Internet of Things in smart buildings, it is crucial to ensure the precise implementation and operation of wireless sensor networks (WSNs). This paper aims to study the implementation aspect of WSNs in a commercial multi-story building, specifically addressing the difficulty of dealing with the variable environmental conditions on each floor. This research addresses the disparity between simulated situations and actual deployments, offering valuable insights into the potential to significantly improve the efficiency and responsiveness of building management systems. We obtain real-time sensor data to analyze and evaluate the system's performance. Our investigation is grounded in the growing importance of incorporating WSNs into buildings to create intelligent environments. We provide an in-depth analysis for scrutinizing the disparities and commonalities between the datasets obtained from real-world deployments and simulation. The results obtained show the significance of accurate simulation models for reliable data representation, providing a roadmap for further developments in the integration of WSNs into intelligent building scenarios. This research's findings highlight the potential for optimizing living and working conditions based on the real-time monitoring of critical environmental parameters. This includes insights into temperature, humidity, and light intensity, offering opportunities for enhanced comfort and efficiency in intelligent environments.

Intrusion detection in machine learning based E-shaped structure with algorithms, strategies and applications in wireless sensor networks.

In the everyday world of computer applications, from the cloud to the Internet of Things, distributed sensor networks are essential (IoT). These computer application devices are often connected to Arduino network connection and microcontrollers such sensors and actuators. Thus, a defensive network with an IDS serves as the need for contemporary networks. The intrusion detection system has unavoidably evolved throughout the years, but despite this, it remains a difficult study topic since the current intrusion detection system uses signature-based approaches rather than anomaly detection. Therefore, improving the current intrusion detection system is challenging since it is difficult to find zero-day attacks in IoT networks when dealing with varied data sources. Filtered Deep Learning Model for Intrusion Detection with a Data Communication Approach is presented in this study. The five steps that make up the suggested model are Initialization of Sensor Networks, Cluster Formation and Head Selection, Connectivity, Attack Detection, and Data Broker. It was discovered that the suggested model for intrusion detection outperformed both the current Deep Learning Neural Net and Artificial Neural Network. In comparison to the most popular algorithms, experimental findings revealed a superior result of 96.12 % accuracy. The E-shaped patch antenna is a brand-new single-patch wide-band microstrip antenna that is presented in this research. A microstrip antenna's patch has two parallel slots built into it to increase its bandwidth. Investigating the behaviour of the currents on the patch allows for the exploration of the wide-band mechanism. A broad bandwidth is achieved by optimising the slot's length, breadth, and location. Finally, a 40.3 % E-shaped patch antenna is developed, made, and tested to resonate at 7.5 and 8.5 GHz for wireless communications. Additionally displayed are the reflection coefficient, VSWR, radiation pattern and directivity.

Trustworthy Localization in IoT Networks: A Survey of Localization Techniques, Threats, and Mitigation.

The Internet of Things (IoT) has revolutionized the world, connecting billions of devices that offer assistance in various aspects of users' daily lives. Context-aware IoT applications exploit real-time environmental, user-specific, or situational data to dynamically adapt to users' needs, offering tailored experiences. In particular, Location-Based Services (LBS) exploit geographical information to adapt to environmental settings or provide recommendations based on users' and nodes' positions, thus delivering efficient and personalized services. To this end, there is growing interest in developing IoT localization systems within the scientific community. In addition, due to the sensitivity and privacy inherent to precise location information, LBS introduce new security challenges. To ensure a more secure and trustworthy system, researchers are studying how to prevent vulnerabilities and mitigate risks from the early design stages of LBS-empowered IoT applications. The goal of this study is to carry out an in-depth examination of localization techniques for IoT, with an emphasis on both the signal-processing design and security aspects. The investigation focuses primarily on active radio localization techniques, classifying them into range-based and range-free algorithms, while also exploring hybrid approaches. Next, security considerations are explored in depth, examining the main attacks for each localization technique and linking them to the most interesting solutions proposed in the literature. By highlighting advances, analyzing challenges, and providing solutions, the survey aims to guide researchers in navigating the complex IoT localization landscape.

Research on WSN reliable ranging and positioning algorithm for forest environment.

Wireless sensor network (WSN) location is a significant research area. In complex environments like forests, inaccurate signal intensity ranging is a major challenge. To address this issue, this paper presents a reliable WSN distance measurement-positioning algorithm for forest environments. The algorithm divides the positioning area into several sub-regions based on the discrete coefficient of the collected signal strength. Then, using the fitting method based on the signal intensity value of each sub-region, the algorithm derives the reference points of the logarithmic distance path loss model and path loss index. Finally, the algorithm locates target nodes using anchor nodes in different regions. Additionally, to enhance the positioning accuracy, weight values are assigned to the positioning result based on the discrete coefficient of the signal intensity in each sub-region. Experimental results demonstrate that the proposed WSN algorithm has high precision in forest environments.

A 2.4 GHz Wide-Range CMOS Current-Mode Class-D PA with HD2 Suppression for Internet of Things Applications.

Short-range Internet of Things (IoT) sensor nodes operating at 2.4 GHz must provide ubiquitous wireless sensor networks (WSNs) with energy-efficient, wide-range output power (POUT). They must also be fully integrated on a single chip for wireless body area networks (WBANs) and wireless personal area networks (WPANs) using low-power Bluetooth (BLE) and Zigbee standards. The proposed fully integrated transmitter (TX) utilizes a digitally controllable current-mode class-D (CMCD) power amplifier (PA) with a second harmonic distortion (HD2) suppression to reduce VCO pulling in an integrated system while meeting harmonic limit regulations. The CMCD PA is divided into 7-bit slices that can be reconfigured between differential and single-ended topologies. Duty cycle distortion compensation is performed for HD2 suppression, and an HD2 rejection filter and a modified C-L-C low-pass filter (LPF) reduce HD2 further. Implemented in a 28 nm CMOS process, the TX achieves a wide POUT range of from 12.1 to -31 dBm and provides a maximum efficiency of 39.8% while consuming 41.1 mW at 12.1 dBm POUT. The calibrated HD2 level is -82.2 dBc at 9.93 dBm POUT, resulting in a transmitter figure of merit (TX_FoM) of -97.52 dB. Higher-order harmonic levels remain below -41.2 dBm even at 12.1 dBm POUT, meeting regulatory requirements.

A Novel Bio-Inspired Bat Node Scheduling Algorithm for Dependable Safety-Critical Wireless Sensor Network Systems.

The multi-objective optimization (MOO) problem in wireless sensor networks (WSNs) is concerned with optimizing the operation of the WSN across three dimensions: coverage, connectivity, and lifetime. Most works in the literature address only one or two dimensions of this problem at a time, except for the randomized coverage-based scheduling (RCS) algorithm and the clique-based scheduling algorithm. More recently, a Hidden Markov Model (HMM)-based algorithm was proposed that improves on the latter two; however, the question remains open if further improvement is possible as previous algorithms explore solutions in terms of local minima and local maxima, not in terms of the full search space globally. Therefore, the main contribution of this paper is to propose a new scheduling algorithm based on bio-inspired computation (the bat algorithm) to address this limitation. First, the algorithm defines a fitness and objective function over a search space, which returns all possible sleep and wake-up schedules for each node in the WSN. This yields a (scheduling) solution space that is then organized by the Pareto sorting algorithm, whose output coordinates are the distance of each node to the base station and the residual energy of the node. We evaluated our results by comparing the bat and HMM node scheduling algorithms implemented in MATLAB. Our results show that network lifetime has improved by 30%, coverage by 40%, and connectivity by 26.7%. In principle, the obtained solution will be the best scheduling that guarantees the best network lifetime performance as well as the best coverage and connectedness for ensuring the dependability of safety-critical WSNs.

Low-Cost Optical Sensors for Soil Composition Monitoring.

Studying soil composition is vital for agricultural and edaphology disciplines. Presently, colorimetry serves as a prevalent method for the on-site visual examination of soil characteristics. However, this technique necessitates the laboratory-based analysis of extracted soil fragments by skilled personnel, leading to substantial time and resource consumption. Contrastingly, sensor techniques effectively gather environmental data, though they mostly lack in situ studies. Despite this, sensors offer substantial on-site data generation potential in a non-invasive manner and can be included in wireless sensor networks. Therefore, the aim of the paper is to develop a low-cost red, green, and blue (RGB)-based sensor system capable of detecting changes in the composition of the soil. The proposed sensor system was found to be effective when the sample materials, including salt, sand, and nitro phosphate, were determined under eight different RGB lights. Statistical analyses showed that each material could be classified with significant differences based on specific light variations. The results from a discriminant analysis documented the 100% prediction accuracy of the system. In order to use the minimum number of colors, all the possible color combinations were evaluated. Consequently, a combination of six colors for salt and nitro phosphate successfully classified the materials, whereas all the eight colors were found to be effective for classifying sand samples. The proposed low-cost RGB sensor system provides an economically viable and easily accessible solution for soil classification.

Energy Consumption Analysis for Continuous Phase Modulation in Smart-Grid Internet of Things of beyond 5G.

Wireless sensor network (WSN) underpinning the smart-grid Internet of Things (SG-IoT) has been a popular research topic in recent years due to its great potential for enabling a wide range of important applications. However, the energy consumption (EC) characteristic of sensor nodes is a key factor that affects the operational performance (e.g., lifetime of sensors) and the total cost of ownership of WSNs. In this paper, to find the modulation techniques suitable for WSNs, we investigate the EC characteristic of continuous phase modulation (CPM), which is an attractive modulation scheme candidate for WSNs because of its constant envelope property. We first develop an EC model for the sensor nodes of WSNs by considering the circuits and a typical communication protocol that relies on automatic repeat request (ARQ)-based retransmissions to ensure successful data delivery. Then, we use this model to analyze the EC characteristic of CPM under various configurations of modulation parameters. Furthermore, we compare the EC characteristic of CPM with that of other representative modulation schemes, such as offset quadrature phase-shift keying (OQPSK) and quadrature amplitude modulation (QAM), which are commonly used in communication protocols of WSNs. Our analysis and simulation results provide insights into the EC characteristics of multiple modulation schemes in the context of WSNs; thus, they are beneficial for designing energy-efficient SG-IoT in the beyond-5G (B5G) and the 6G era.

Energy Consumption Minimization in Unmanned Aerial Vehicle-Enabled Secure Wireless Sensor Networks.

In wireless sensor networks (WSNs), unmanned aerial vehicles (UAVs) are considered an effective data collection tool. In this paper, we investigate the energy-efficient data collection problem in a UAV-enabled secure WSN without knowing the instantaneous channel state information of the eavesdropper (Eve). Specifically, the UAV collected the information from all the wireless sensors at the scheduled time and forward it to the fusion center while Eve tries to eavesdrop on this confidential information from the UAV. To surmount this intractable and convoluted mixed-integer non-convex problem, we propose an efficient iterative optimization algorithm using the block coordinate descent (BCD) method to minimize the maximum energy consumption of the ground sensor nodes (GSNs) under the constraints of secrecy outage probability (SOP), connection outage probability (COP), minimum secure data, information causality, and UAV trajectory. Numerical results demonstrate the superiority of the algorithm we proposed in energy consumption and secrecy rate compared with other schemes.

AI-IoT Low-Cost Pollution-Monitoring Sensor Network to Assist Citizens with Respiratory Problems.

The proliferation and great variety of low-cost air quality (AQ) sensors, combined with their flexibility and energy efficiency, gives an opportunity to integrate them into Wireless Sensor Networks (WSN). However, with these sensors, AQ monitoring poses a significant challenge, as the data collection and analysis process is complex and prone to errors. Although these sensors do not meet the performance requirements for reference regulatory-equivalent monitoring, they can provide informative measurements and more if we can adjust and add further processing to their raw measurements. Therefore, the integration of these sensors aims to facilitate real-time monitoring and achieve a higher spatial and temporal sampling density, particularly in urban areas, where there is a strong interest in providing AQ surveillance services since there is an increase in respiratory/allergic issues among the population. Leveraging a network of low-cost sensors, supported by 5G communications in combination with Artificial Intelligence (AI) techniques (using Convolutional and Deep Neural Networks (CNN and DNN)) to predict 24-h-ahead readings is the goal of this article in order to be able to provide early warnings to the populations of hazards areas. We have evaluated four different neural network architectures: Multi-Linear prediction (with a dense Multi-Linear Neural Network (NN)), Multi-Dense network prediction, Multi-Convolutional network prediction, and Multi-Long Short-Term Memory (LSTM) network prediction. To perform the training of the prediction of the readings, we have prepared a significant dataset that is analyzed and processed for training and testing, achieving an estimation error for most of the predicted parameters of around 7.2% on average, with the best option being the Multi-LSTM network in the forthcoming 24 h. It is worth mentioning that some pollutants achieved lower estimation errors, such as CO2 with 0.1%, PM10 with 2.4% (as well as PM2.5 and PM1.0), and NO2 with 6.7%.

An improved energy-efficient cloud-optimized load-balancing for IoT frameworks.

As wireless communication grows, so does the need for smart, simple, affordable solutions. The need prompted academics to develop appropriate network solutions ranging from wireless sensor networks (WSNs) to the Internet of Things (IoT). With the innovations of researchers, the necessity for enhancements in existing researchers has increased. Initially, network protocols were the focus of study and development. Regardless, IoT devices are already being employed in different industries and collecting massive amounts of data through complicated applications. This necessitates IoT load-balancing research. Several studies tried to address the communication overheads produced by significant IoT network traffic. These studies intended to control network loads by evenly spreading them across IoT nodes. Eventually, the practitioners decided to migrate the IoT node data and the apps processing it to the cloud. So, the difficulty is to design a cloud-based load balancer algorithm that meets the criteria of IoT network protocols. Defined as a unique method for controlling loads on cloud-integrated IoT networks. The suggested method analyses actual and virtual host machine needs in cloud computing environments. The purpose of the proposed model is to design a load balancer that improves network response time while reducing energy consumption. The proposed load balancer algorithm may be easily integrated with peer-existing IoT frameworks. Handling the load for cloud-based IoT architectures with the above-described methods. Significantly boosts response time for the IoT network by 60 %. The proposed scheme has less energy consumption (31 %), less execution time (24\%), decreased node shutdown time (45 %), and less infrastructure cost (48\%) in comparison to existing frameworks. Based on the simulation results, it is concluded that the proposed framework offers an improved solution for IoT-based cloud load-balancing issues.

A Total Randomized SLP-Preserving Technique with Improved Privacy and Lifetime in WSNs for IoT and the Impact of Radio Range on SLP.

Enhanced source location privacy and prolonged network lifetime are imperative for WSNs-the skin of IoT. To address these issues, a novel technique named source location privacy with enhanced privacy and network lifetime (SLP-E) is proposed. It employs a reverse random walk followed by a walk on annular rings, to create divergent routing paths in the network, and finally, min-hop routing together with the walk on dynamic rings to send the packets to the base station (BS). The existing random walk-based SLP approaches have either focused on enhancing only privacy at the cost of network lifetime (NLT) or have aimed at improving the amount of privacy without degrading the network lifetime performance. Unlike these schemes, the objectives of the proposed work are to simultaneously improve the safety period and network lifetime along with achieving uniform privacy. This combination of improvements has not been considered so far in a single SLP random walk-based scheme. Additionally, this study investigates for the first time the impact of the sensors' radio range on both privacy strength and network lifetime metrics in the context of SLP within WSNs. The performance measurements conducted using the proposed analytical models and the simulation results indicate an improvement in the safety period and network lifespan. The safety period in SLP-E increased by 26.5%, 97%, 123%, and 15.7% when compared with SLP-R, SRR, PRLPRW, and PSSLP techniques, respectively. Similarly, the network lifetime of SLP-E increased by 17.36%, 0.2%, 83.41%, and 13.42% when compared with SLP-R, SRR, PRLPRW, and PSSLP techniques, respectively. No matter where a source node is located within a network, the SLP-E provides uniform and improved privacy and network lifetime. Further, the simulation results demonstrate that the sensors' radio range has an impact on the safety period, capture ratio, and the network lifetime.

AIoT in Agriculture: Safeguarding Crops from Pest and Disease Threats.

A significant proportion of the world's agricultural production is lost to pests and diseases. To mitigate this problem, an AIoT system for the early detection of pest and disease risks in crops is proposed. It presents a system based on low-power and low-cost sensor nodes that collect environmental data and transmit it once a day to a server via a NB-IoT network. In addition, the sensor nodes use individual, retrainable and updatable machine learning algorithms to assess the risk level in the crop every 30 min. If a risk is detected, environmental data and the risk level are immediately sent. Additionally, the system enables two types of notification: email and flashing LED, providing online and offline risk notifications. As a result, the system was deployed in a real-world environment and the power consumption of the sensor nodes was characterized, validating their longevity and the correct functioning of the risk detection algorithms. This allows the farmer to know the status of their crop and to take early action to address these threats.