Interfacial stability and electronic properties of YBCO/ABO3 heterostructures: A comparative DFT study.

In this study, we utilized density functional theory (DFT) to analyze the interfacial properties of YBa2Cu3O7 (YBCO) with perovskite metal oxides LaAlO3 (LAO), KTaO3 (KTO), and SrTiO3 (STO). We focused on surface energies, lattice mismatches, strain energies, and adhesion energies to gauge the stability and compatibility of these interfaces. Our findings indicate that KTO exhibits the highest surface preference due to its lowest surface energy (0.054 eV/Å 2), suggesting superior surface stability. Moreover, LAO and STO show minor lattice mismatches with YBCO, implying effective interface integration, while YBCO/KTO interfaces experience significant strain due to extensive lattice mismatches. STO is distinguished by the lowest strain energy (0.07 eV), indicating minimal energy requirement for lattice mismatch accommodation, unlike KTO, which demonstrates high strain energy (0.42 eV) and potential structural distortions. The strongest interfacial bond, as indicated by an adhesion energy of -2.16 eV, was observed at YBCO/LAO, while the weakest was found at the YBCO/KTO interface, with an adhesion energy of -0.56 eV. Additionally, charge density difference (CDD) analysis highlighted electron density redistribution at the interfaces, predominantly around interfacial oxygen atoms, indicating a mix of ionic and covalent bonding. This study provides comparative insights into the interfacial characteristics of YBCO/ABO3 heterostructures, suggesting pathways for optimizing their design and performance.

Caries-Prone Primary Teeth: A Hidden Reason and Prophylactic Treatment in the Viewpoint of Materials Science.

Dental caries, the most prevalent chronic disease across all age groups, has a high prevalence, particularly among children. However, there is no specific and effective treatment for the prevention of caries in primary teeth (Pr.T.), which stems from a lack of knowledge regarding the basic nature of the tooth surface. Herein, we observed that the adhesion energies of the caries-related bacteria Streptococcus mutans and Streptococcus sanguinis to Pr.T were approximately 10 and 5.5 times higher than those to permanent teeth (Pe.T). A lower degree of mineralization and more hydrophilic characteristics of the Pr.T enamel account for this discrepancy. Accordingly, we proposed that the on-target modification of both hydroxyapatite and organic components on Pr.T by dual modification would render a sufficient hydration layer. This resulted in an approximately 11-time decrease in bacterial adhesion energy after treatment. In contrast, a single hydroxyapatite modification on Pe.T and young permanent teeth (Y.Pe.T) was sufficient to achieve a similar effect. Theoretical simulation further verified the rationality of the approach. Our findings may help understand the reason for Pr.T being caries-prone and provide references for treatment using resin restorations. This strategy offers valuable insights into daily oral hygiene and dental prophylactic treatment in children.

Elucidating bacterial coaggregation through a physicochemical and imaging surface characterization.

Bacterial coaggregation is a highly specific type of cell-cell interaction, well-documented among oral bacteria, and involves specific characteristics of the cell surface of the coaggregating strains. However, the understanding of the mechanisms promoting coaggregation in aquatic systems remains limited. This gap is critical to address, given the broad implications of coaggregation for multispecies biofilm formation, water quality, the performance of engineered systems, and diverse biotechnological applications. Therefore, this study aims to comprehensively characterize the cell surface of the coaggregating strain Delftia acidovorans 005P, isolated from drinking water, alongside a non-coaggregating strain, D. acidovorans 009P. By analyzing two strains of the same species, we aim to identify the factors contributing to the coaggregation ability of strain 005P. To achieve this, we employed a combination of physicochemical characterization, Fourier-transform infrared spectroscopy (FTIR), and advancing imaging techniques [transmission electron microscopy and cryo-electron tomography (cryo-ET)]. The coaggregating strain (005P) exhibited higher surface hydrophobicity, negative surface charge, and cell surface and co-adhesion energies than the non-coaggregating strain (009P). The chemical characterization of bacterial surfaces through FTIR revealed subtle differences, particularly in spectral regions linked to carbohydrates and phosphodiesters/amide III of proteins (860-930 cm-1 and 1212-1240 cm-1, respectively). Cryo-ET highlighted significant differences in pili structures between the strains, such as variations in length, frequency, and arrangement. The pili in the 005P strain, identified as pili-like adhesins, serve as key mediators of coaggregation. By integrating physicochemical analyses and high-resolution imaging techniques, this study conclusively links the coaggregation ability of D. acidovorans 005P to its unique pili characteristics, emphasizing their crucial role in microbial coaggregation in aquatic environments.

Iron Tailings as Mineral Fillers and Their Effect on the Fatigue Performance of Asphalt Mastic.

Incorporating iron tailings (ITs) into asphalt represents a new method for waste-to-resource conversion. The objective of this study is to evaluate the fatigue performance of ITs as fillers in asphalt mastic and investigate the interaction and interfacial adhesion energy between asphalt and ITs. To achieve that, the particle size distributions of two ITs and limestone filler (LF) were tested through a laser particle size analyzer; the morphology and structure characteristics were obtained by scanning electronic microscopy (SEM), the mineral compositions were conducted through X-ray diffraction (XRD), and the chemical compositions were tested through X-ray Fluorescence Spectrometer (XRF). Furthermore, the fatigue properties of asphalt mastic and the interaction between asphalt binder and mineral fillers (ITs and LFs) were evaluated by Dynamic Shear Rheometer (DSR). The interfacial adhesion energy between ITs and asphalt binder were calculated through molecular dynamics simulation. In the end, the correlation between the test results and the fatigue life is established based on the gray correlation analysis, the environmental and economic benefits of iron tailings asphalt pavement are further evaluated. The results show that the particle size distribution of ITs is concentrated between 30 µm and 150 µm, and the main component is quartz. ITs have rich angularity and a higher interaction ability with asphalt. The adhesion energy of iron tailings filler to asphalt is less than that of limestone. The correlation degree of the interfacial adhesion energy and interaction between asphalt and mineral filler with asphalt mastic fatigue life is close to 0.58. Under the combined action of interaction ability and interfacial adhesion energy, the fatigue life of IT asphalt mastic meets the requirements. ITs as a partial replacement for mineral fillers in asphalt pavement have great environmental and social effectiveness.

Molecular interaction mechanism for humic acids fouling resistance on charged, zwitterion-like and zwitterionic surfaces.

Humic acids (HA) are ubiquitous in surface waters, leading to significant fouling challenges. While zwitterion-like and zwitterionic surfaces have emerged as promising candidates for antifouling, a quantitative understanding of molecular interaction mechanism, particularly at the nanoscale, still remains elusive. In this work, the intermolecular forces between HA and charged, zwitterion-like or zwitterionic monolayers in aqueous environments were quantified using atomic force microscope. Compared to cationic MTAC ([2-(methacryloyloxy)ethyl]trimethylammonium chloride), which exhibited an adhesion energy of âˆ¼1.342 mJ/m2 with HA due to the synergistic effect of electrostatic attraction and possible cation-π interaction, anionic SPMA (3-sulfopropyl methacrylate) showed a weaker adhesion energy (∼0.258 mJ/m2) attributed to the electrostatic repulsion. Zwitterion-like MTAC/SPMA mixture, driven by electrostatic attraction between opposite charges, formed a hydration layer that prevented the interaction with HA, thereby considerably reducing adhesion energy to âˆ¼0.123 mJ/m2. In contrast, zwitterionic MPC (2-methacryloyloxyethyl phosphorylcholine) and DMAPS ([2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl) ammonium hydroxide) displayed ultralow adhesion energy (0.06-0.07 mJ/m2) with HA, arising from their strong dipole moments which could induce a tight hydration layer that effectively inhibited HA fouling. The pH-mediated electrostatic interaction resulted in the increased adhesion energy for MTAC but decreased adhesion energy for SPMA with elevated pH, while the adhesion energy for zwitterion-like and zwitterionic surfaces was independent of environmental pH. Density functional theory (DFT) simulation confirmed the strong binding capability of MPC and DMAPS with water molecules (∼-12 kcal mol-1). This work provides valuable insights into the molecular interaction mechanisms underlying humic-substance-fouling resistance of charged, zwitterion-like and zwitterionic materials at the nanoscale, shedding light on developing more effective strategy for HA antifouling in water treatment.

Can Adhesion Energy Optimize Interface Thermal Resistance at a Soft/Hard Material Interface?

Thermal resistance at a soft/hard material interface plays an undisputed role in the development of electronic packaging, sensors, and medicine. Adhesion energy and phonon spectra match are two crucial parameters in determining the interfacial thermal resistance (ITR), but it is difficult to simultaneously achieve these two parameters in one system to reduce the ITR at the soft/hard material interface. Here, we report a design of an elastomer composite consisting of a polyurethane-thioctic acid copolymer and microscale spherical aluminum, which exhibits both high phonon spectra match and high adhesion energy (>1000 J/m2) with hard materials, thus leading to a low ITR of 0.03 mm2·K/W. We further develop a quantitative physically based model connecting the adhesion energy and ITR, revealing the key role the adhesion energy plays. This work serves to engineer the ITR at the soft/hard material interface from the aspect of adhesion energy, which will prompt a paradigm shift in the development of interface science.

The science and mechanics of adhesion: An industrial view.

OBJECTIVES: Undoubtedly, adhesion is one of the broadest terms in science and technology used to describe several bulk and interface related phenomena. While the thermodynamic work of adhesion is determined by contacting surfaces and their intrinsic surface energetics, it is important to understand how adhesive properties of materials are additionally governed and amplified by their dissipative rate processes in the bulk or near the interface as they go through large strains and deformation. METHODS: Systematic review of the literature showed that the involved interfacial mechanisms were grouped into several categories ranging from micromechanical interlocking to molecular interdiffusion of surface constituents, a characteristic of most polymeric systems. RESULTS: This paper addressed the static and dynamic contributions to the adhesion energy and discussed its relation to microstructure and surface architecture in pressure sensitive and fracture in structural adhesives. While the focus was on industrial view of adhesion, parallels in adhesive dentistry were given where connections between adhesion, boundary geometry/compliance, shrinkage stress, material model, joint design, retention, and interfacial curing were made. CONCLUSIONS: Adhesion science and mechanics are complex multi-disciplinary fields involving surfaces, substrates, and loading system involving a broad range of mechanisms applicable to dentistry.

Molecular Insights into the Interaction Mechanism Underlying the Aggregation of Humic Acid and Its Adsorption on Clay Minerals.

Humic acid (HA) is ubiquitous in both terrestrial and aquatic environments, and understanding the molecular interaction mechanisms underlying its aggregation and adsorption is of vital significance. However, the intermolecular interactions of HA-HA and HA-clay mineral systems in complex aqueous environments remain elusive. Herein, the interactions of HA with various model surfaces (i.e., HA, mica, and talc) were quantitatively measured in aqueous media at the nanoscale using an atomic force microscope. The HA-HA interaction was found to be purely repulsive during surface approach, consistent with free energy calculation; during retraction, pH-dependent adhesion was observed due to the protonation/deprotonation of HA that influences the formation of hydrogen bonds. Different from the mica case, hydrophobic interaction was detected for the HA-talc system at pH 5.8, contributing to the stronger HA-talc adhesion, as also evidenced by adsorption results. Notably, HA-mica adhesion strongly depended on the loading force and contact time, most likely because of the short-range and time-dependent interfacial hydrogen bonding interaction under confinement, as compared to the dominant hydrophobic interaction for the HA-talc case. This study provides quantitative insights into the fundamental molecular interaction mechanisms underlying the aggregation of HA and its adsorption on clay minerals of varying hydrophobicity in environmental processes.

Exceptional Elasticity of Microscale Constrained MoS2 Domes.

The outstanding mechanical performances of two-dimensional (2D) materials make them appealing for the emerging fields of flextronics and straintronics. However, their manufacturing and integration in 2D crystal-based devices rely on a thorough knowledge of their hardness, elasticity, and interface mechanics. Here, we investigate the elasticity of highly strained monolayer-thick MoS2 membranes, in the shape of micrometer-sized domes, by atomic force microscopy (AFM)-based nanoindentation experiments. A dome's crushing procedure is performed to induce a local re-adhesion of the dome's membrane to the bulk substrate under the AFM tip's load. It is worth noting that no breakage, damage, or variation in size and shape are recorded in 95% of the crushed domes upon unloading. Furthermore, such a procedure paves the way to address quantitatively the extent of the van der Waals interlayer interaction and adhesion of MoS2 by studying pull-in instabilities and hysteresis of the loading-unloading cycles. The fundamental role and advantage of using a superimposed dome's constraint are also discussed.

Effective elastic modulus of an intact cornea related to indentation behavior: A comparison between the Hertz model and Johnson-Kendall-Roberts model.

In this study, a macro-indentation test on the submillimeter scale was performed to analyze the indentation behavior of an intact cornea under physiological pressures. The Hertz and Johnson-Kendall-Roberts (JKR) models were employed to solve the elastic modulus (E) of the intact cornea. The relevant detailed analysis showed that the JKR model, which accounted for the contribution from the adhesion energy, could be used to obtain the E values that were more than two-folds of those obtained from the Hertz model, which only considered the external force. Compared with the uniaxial tension test in vitro, unlike the elastic Hertz-model, the E values under physiological pressures that were obtained with the JKR model were between the lower and upper limits of corneal material. This phenomenon indicated that the JKR model could be used to obtain reasonably effective E values of an intact cornea under physiological pressures.

Adhesion Process of Biomimetic Myelin Membranes Triggered by Myelin Basic Protein.

The myelin sheath-a multi-double-bilayer membrane wrapped around axons-is an essential part of the nervous system which enables rapid signal conduction. Damage of this complex membrane system results in demyelinating diseases such as multiple sclerosis (MS). The process in which myelin is generated in vivo is called myelination. In our study, we investigated the adhesion process of large unilamellar vesicles with a supported membrane bilayer that was coated with myelin basic protein (MBP) using time-resolved neutron reflectometry. Our aim was to mimic and to study the myelination process of membrane systems having either a lipid-composition resembling that of native myelin or that of the standard animal model for experimental autoimmune encephalomyelitis (EAE) which represents MS-like conditions. We were able to measure the kinetics of the partial formation of a double bilayer in those systems and to characterize the scattering length density profiles of the initial and final states of the membrane. The kinetics could be modeled using a random sequential adsorption simulation. By using a free energy minimization method, we were able to calculate the shape of the adhered vesicles and to determine the adhesion energy per MBP. For the native membrane the resulting adhesion energy per MBP is larger than that of the EAE modified membrane type. Our observations might help in understanding myelination and especially remyelination-a process in which damaged myelin is repaired-which is a promising candidate for treatment of the still mostly incurable demyelinating diseases such as MS.

Graphene Antiadhesion Layer for the Effective Peel-and-Pick Transfer of Metallic Electrodes toward Flexible Electronics.

Owing to its exceptional physicochemical properties, graphene has demonstrated unprecedented potential in a wide array of scientific and industrial applications. By exploiting its chemically inert surface endowed with unique barrier functionalities, we herein demonstrate antiadhesive monolayer graphene films for realizing a peel-and-pick transfer process of target materials from the donor substrate. When the graphene antiadhesion layer (AAL) is inserted at the interface between the metal and the arbitrary donor substrate, the interfacial interactions can be effectively weakened by the weak interplanar van der Waals forces of graphene, enabling the effective release of the metallic electrode from the donor substrate. The flexible embedded metallic electrode with graphene AAL exhibited excellent electrical conductivity, mechanical durability, and chemical resistance, as well as excellent performance in flexible heater applications. This study afforded an effective strategy for fabricating high-performance and ultraflexible embedded metallic electrodes for applications in the field of highly functional flexible electronics.

Effects of Transition Element Additions on the Interfacial Interaction and Electronic Structure of Al(111)/6H-SiC(0001) Interface: A First-Principles Study.

In this work, the effects of 20 transition element additions on the interfacial adhesion energy and electronic structure of Al(111)/6H-SiC(0001) interfaces have been studied by the first-principles method. For pristine Al(111)/6H-SiC(0001) interfaces, both Si-terminated and C-terminated interfaces have covalent bond characteristics. The C-terminated interface has higher binding energy, which is mainly due to the stronger covalent bond formed by the larger charge transfer between C and Al. The results show that the introduction of many transition elements, such as 3d transitional group Mn, Fe, Co, Ni, Cu, Zn and 4d transitional group Tc, Ru, Rh, Pd, Ag, can improve the interfacial adhesion energy of the Si-terminated Al(111)/6H-SiC(0001) interface. However, for the C-terminated Al(111)/6H-SiC(0001) interface, only the addition of Co element can improve the interfacial adhesion energy. Bader charge analysis shows that the increase of interfacial binding energy is mainly attributed to more charge transfer.

Low-Temperature Synthesis of Wafer-Scale MoS2-WS2 Vertical Heterostructures by Single-Step Penetrative Plasma Sulfurization.

Two-dimensional (2D) transition metal dichalcogenides (TMDs) have attracted considerable attention owing to their synergetic effects with other 2D materials, such as graphene and hexagonal boron nitride, in TMD-based heterostructures. Therefore, it is important to understand the physical properties of TMD-TMD vertical heterostructures for their applications in next-generation electronic devices. However, the conventional synthesis process of TMD-TMD heterostructures has some critical limitations, such as nonreproducibility and low yield. In this paper, we synthesize wafer-scale MoS2-WS2 vertical heterostructures (MWVHs) using plasma-enhanced chemical vapor deposition (PE-CVD) via penetrative single-step sulfurization discovered by time-dependent analysis. This method is available for fabricating uniform large-area vertical heterostructures (4 in.) at a low temperature (300 °C). MWVHs were characterized using various spectroscopic and microscopic techniques, which revealed their uniform nanoscale polycrystallinity and the presence of vertical layers of MoS2 and WS2. In addition, wafer-scale MWVHs diodes were fabricated and demonstrated uniform performance by current mapping. Furthermore, mode I fracture tests were performed using large double cantilever beam specimens to confirm the separation of the MWVHs from the SiO2/Si substrate. Therefore, this study proposes a synthesis mechanism for TMD-TMD heterostructures and provides a fundamental understanding of the interfacial properties of TMD-TMD vertical heterostructures.

Thermoresponsive Surfaces Grafted by Shrinkable Hydrogel Poly(N-isopropylacrylamide) for Controlling Microalgae Cells Adhesion during Biofilm Cultivation.

Microalgae is a promising candidate for reducing greenhouse gas and producing renewable biofuels. For microalgae biofilm cultivation, a strong adhesion ability of microalgae cells onto the surface is a prerequisite to resist the fluid shear stress, while strong adhesion is not of benefit to the biofilm harvesting process. To solve this dilemma, a thermoresponsive surface (TMRS) with lower critical solution temperature of 33 °C was made by grafting N-isopropylacrylamide onto a silicate glass slide. The wettability of the TMRS changed from hydrophilic (contact angle of 59.4°) to hydrophobic (contact angle of 91.6°) when the temperature rose from 15 to 35 °C, resulting in the increase of adhesion energy of the TMRS to Chlorella vulgaris cells by 135.6%. The experiments showed that the cells were more likely to attach onto the TMRS at the higher temperature of 35 °C owing to the surface microstructures generated by the hydrogel layer shrinkage, which is similar in size to the microalgae cells. And the cell coverage rate on TMRS increased by 32% compared to the original glass surface. Conversely, the cells separate easily from the TMRS at a lower temperature of 15 °C, and the cell adhesion density was reduced by 19% due to hydrogel layer swelling to a relatively flat surface.

The Molecular Theory of Liquid Nanodroplets Energetics in Aerosols.

Studies of the coronavirus SARS-CoV-2 spread mechanisms indicate that the main mechanism is associated with the spread in the atmosphere of micro- and nanodroplets of liquid with an active agent. However, the molecular theory of aerosols of microdroplets in gases remains poorly developed. In this work, the energy properties of aerosol nanodroplets of simple liquids suspended in a gas were studied within the framework of molecular theory. The three components of the effective aerosol Hamiltonian were investigated: (1) the interaction energy of an individual atom with a liquid nanodroplet; (2) the surface energy of liquid nanodroplet; and (3) the interaction energy of two liquid nanodroplets. The size dependence of all contributions was investigated. The pairwise interparticle interactions and pairwise interparticle correlations were accounted for to study the nanodroplet properties using the Fowler approximation. In this paper, the problem of the adhesion energy calculation of a molecular complex and a liquid nanodroplet is discussed. The derived effective Hamiltonian is generic and can be used for the cases of multicomponent nano-aerosols and to account for particle size distributions.

Well-Adhered Copper Nanocubes on Electrospun Polymeric Fibers.

Electrospun polymer fibers can be used as templates for the stabilization of metallic nanostructures, but metallic species and polymer macromolecules generally exhibit weak interfacial adhesion. We have investigated the adhesion of model copper nanocubes on chemically treated aligned electrospun polyacrylonitrile (PAN) fibers based on the introduction of interfacial shear strains through mechanical deformation. The composite structures were subjected to distinct macroscopic tensile strain levels of 7%, 11%, and 14%. The fibers exhibited peculiar deformation behaviors that underscored their disparate strain transfer mechanisms depending on fiber size; nanofibers exhibited multiple necking phenomena, while microfiber deformation proceeded through localized dilatation that resulted in craze (and microcrack) formation. The copper nanocubes exhibited strong adhesion on both fibrous structures at all strain levels tested. Raman spectroscopy suggests chemisorption as the main adhesion mechanism. The interfacial adhesion energy of Cu on these treated PAN nanofibers was estimated using the Gibbs-Wulff-Kaischew shape theory giving a first order approximation of about 1 J/m2. A lower bound for the system's adhesion strength, based on limited measurements of interfacial separation between PAN and Cu using mechanically applied strain, is 0.48 J/m2.

Quantifying the relationship between surfaces' nano-contact point density and adhesion force of Candida albicans.

It has been recently recognized that controlled surface structuring on the nanometer scale is a successful strategy to endow different materials with antimicrobial properties. Despite many studies on bacterial interactions with nanostructured surfaces, a quantitative link between surface topography and bacterial adhesion is still missing. To quantitatively link cell adhesion data with topographical surface parameters, we performed single-cell spectroscopy on chemically identical surfaces with controlled nano-contact point density achieved by immobilization of gold nanoparticles (AuNP) on gold thin films. Such materials surfaces have previously shown antimicrobial (anti-adhesive) efficacy towards Gram-negative Escherichia coli cells. In the current study, the influence of nano-structured surfaces on the surface coverage and adhesion forces of clinically relevant Candida albicans (C. albicans), the fungus primarily associated with implant infections, was investigated to validate their antimicrobial potency against different microbial cells. The adhesion forces of C. albicans cells to nanostructured surfaces showed a decreasing trend with decreasing contact-point density and correlated well with the results of the respective C. albicans cell counts. The surfaces with the lowest contact-point density, 25 AuNP/µm², resulted in an average adhesion force of 5 nN, which was up to 5 times lower compared to control and 61 AuNP/µm² surfaces. Further, detailed analyses of force-distance curves revealed that the work of adhesion, and thus the energy required to remove the C. albicans cell from the surface is up to 10 times lower on 25 AuNP/µm² surfaces compared to unstructured surfaces. These findings show that a controlled tuning of nanostructured surfaces in terms of accessible nano-contact points is crucial to generate surface structures with enhanced antimicrobial properties. The gained knowledge can be further exploited for the design of biomaterials surfaces to prevent adhesion of some most commonly encountered pathogens.

Probing the intermolecular interaction mechanisms between humic acid and different substrates with implications for its adsorption and removal in water treatment.

Humic substance is a ubiquitous class of natural organic matter (NOM) in soil and aquatic ecosystems, which severely affects the terrestrial and aquatic environments as well as water-based engineering systems by adsorption on solids (e.g., soil minerals, nanoparticles, membranes) via different interaction mechanisms. Herein, the chemical force microscopy (CFM) technique was employed to quantitatively probe the intermolecular forces of humic acid (HA, a representative humic substance) interacting with self-assembled monolayers (SAMs, i.e., OH-SAMs, CH3-SAMs, NH2-SAMs and COOH-SAMs) in various aqueous environments at the nanoscale. The interaction forces measured during approach could be well fitted by the extended Derjaguin-Landau-Verwey-Overbeek (DLVO) theory by incorporating the hydrophobic interaction. The average adhesion energy followed the trend as: NH2-SAMs (∼3.11 mJ/m2) > CH3-SAMs (∼2.03 mJ/m2) > OH-SAMs (∼1.38 mJ/m2) > COOH-SAMs (∼0.52 mJ/m2) in 100 mM NaCl at pH 5.8, indicating the significant role of electrostatic attraction in contributing to the HA adhesion, followed by hydrophobic interaction and hydrogen bonding. The adhesion energy was found to be dependent on NaCl concentration, Ca2+ addition and pH. For the interaction between NH2-SAMs and HA, their electrostatic attraction at pH 5.8 turned to repulsion under alkaline condition which led to the sudden drop of adhesion energy. Such results promised the adsorption and release of HA using the recyclable magnetic Fe3O4 nanoparticles coated with (3-aminopropyl)tiethoxysilane (APTES). This work provides quantitative information on the molecular interaction mechanism underlying the adsorption of HA on solids of varying surface chemistry at the nanoscale, with useful implications for developing effective chemical additives to remove HA in water treatment and many other engineering processes.

Molecular Dynamics Simulation on the Influences of Nanostructure Shape, Interfacial Adhesion Energy, and Mold Insert Material on the Demolding Process of Micro-Injection Molding.

In micro-injection molding, the interaction between the polymer and the mold insert has an important effect on demolding quality of nanostructure. An all-atom molecular dynamics simulation method was performed to study the effect of nanostructure shape, interfacial adhesion energy, and mold insert material on demolding quality of nanostructures. The deformation behaviors of nanostructures were analyzed by calculating the non-bonded interaction energies, the density distributions, the radii of gyration, the potential energies, and the snapshots of the demolding stage. The nanostructure shape had a direct impact on demolding quality. When the contact areas were the same, the nanostructure shape did not affect the non-bonded interaction energy at PP-Ni interface. During the demolding process, the radii of gyration of molecular chains were greatly increased, and the overall density was decreased significantly. After assuming that the mold insert surface was coated with an anti-stick coating, the surface burrs, the necking, and the stretching of nanostructures were significantly reduced after demolding. The deformation of nanostructures in the Ni and Cu mold inserts were more serious than that of the Al2O3 and Si mold inserts. In general, this study would provide theoretical guidance for the design of nanostructure shape and the selection of mold insert material.