Highly Porous, Ultralight, Biocompatible Silk Fibroin Aerogel-Based Triboelectric Nanogenerator.

This study presents the fabrication of an ultralight, porous, and high-performance triboelectric nanogenerator (TENG) utilizing silk fibroin (SF) aerogels and PDMS sponges as the friction layer. The transition from two-dimensional film friction layers to three-dimensional porous aerogels significantly increased the specific surface area, offering an effective strategy for designing high-performance SF aerogel-based TENGs. The TENG incorporating the porous SF aerogel exhibited optimal output performance at a 3% SF concentration, achieving a maximum open circuit voltage of 365 V, a maximum short-circuit current of 11.8 µA, and a maximum power density of 7.52 W/m2. In comparison to SF-film-based TENGs, the SF-aerogel based TENG demonstrated a remarkable 6.5-fold increase in voltage and a 4.5-fold increase in current. Furthermore, the power density of our SF-based TENG surpassed the previously reported optimal values for SF-based TENGs by 2.4 times. Leveraging the excellent mechanical stability and biocompatibility of TENGs, we developed an SF-based TENG self-powered sensor for the real-time monitoring of subtle biological movements. The SF-based TENG exhibits promising potential as a wearable bioelectronic device for health monitoring.

Enhanced specific surface area and mechanical property of silk nanofibers aerogel for potential hemostasis applications.

Biopolymer aerogel is a new type of material with potential applications in the biomedical field. Silk fibroin is of particular interest as a raw material with good biocompatibility and degradable. However, the low mechanical strength and small specific surface area of silk fibroin aerogels limit its further development. Herein, a fast water absorption, highly specific surface area and mechanically strong of aerogels were prepared using low crystal silk fibroin nanofibers (SNF), sol-gel process, solvent exchange and supercritical carbon dioxide (CO2) drying method. The resulting Aero-Sc displayed highly specific surface area (251 m2/g), porosity (97.6 %) and water absorption capacity (1200 %). Furthermore, with rapid water absorption and stronger erythrocyte adhesion, the Aero-Sc showed highly effective hemostasis in vitro. In vivo, animal experiments on rat liver hemorrhage model confirmed that SNF aerogels have a less blood loss (312 ± 29 mg) and faster hemostatic time (92 ± 13 s) than commercially gelatin sponge (p < 0.05). The unique properties of silk fibroin nanofibers aerogel developed in this study has great potential to be a safe and effective hemostatic medical device.

Development of an active agar aerogel with dual antioxidant and UV-blocking activities using chlorine-doped graphene quantum dots.

Active packaging is of great interest in the modern food industry due to increasing shelf life and enhancing food quality. The importance of this technology increases when natural polymers are used in the construction of active packages. Development of a natural, biodegradable, and dual-active film was aimed in this study. So, agar aerogel containing different amounts of chlorine-doped graphene quantum dots (Cl-GQDs) was prepared. Cl-GQDs had excitation-dependent fluorimetry behavior due to the zigzag edges of graphene. The mean diameter of spherical nanoparticles of Cl-GQDs was about 12 nm, according to HR-TEM images. The results of Raman and ATR-FTIR confirmed that chlorine was well-doped on the GQD structure. Cl-GQDs showed high UV-absorption capability and very strong antioxidant activity (94.31 %), which maintained these activities after incorporation into the agar aerogel. The doped chlorine was responsible for the capacity to charge transfer of GQDs. BET and SEM results showed that adding Cl-GQDs to agar caused a porous structure. Finally, different types of agar aerogels containing Cl-GQDs can be used considering the intended application of aerogel. Agar aerogel containing 20 % Cl-GQDs is suggested if a porous aerogel with good thermal insulation properties is considered. However, agar aerogel containing 1 % Cl-GQDs is suitable as an active film. In conclusion, while Cl-GQDs hold promise as sustainable and multifunctional food packaging materials, their potential toxic effects must be thoroughly evaluated. Future studies should explore migration, potential interactions with specific food matrices, and long-term safety to ensure consumer protection.

N-doped lignin-based activated carbon aerogel derived from bamboo black pulp liquor for efficient removal of malachite green in wastewater.

In this study, a lignin-based aerogel (LA) was prepared through acid precipitation of BPBL, followed by sol-gel method and freeze-drying. Additionally, a one-step activation-carbonization method was used to acquire nitrogen-doped lignin-based activated carbon aerogel (NLACA). The adsorption and catalytic degradation performance for malachite green (MG) were examined. The specific surface area of NLACA after N-doping was 2644.5 m2/g. The adsorption capacity for MG was increased to 3433 mg/g with the presence of nitrogenous functional groups on surface of NLACA compared without N-doping. Meanwhile, non-radical singlet oxygen is the primary active substance and degradation efficiency arrives at 91.8% after the catalytic degradation within 20 min and it has good stability and reuse. Three possible degradation pathways during degradation were analyzed by LC-MS technique. The adsorption isotherm and kinetic data demonstrated conformity with both the Langmuir model and the pseudo-second-order kinetic model. The primary mechanisms of the adsorption for MG dyes on NLACA include hydrogen bonding, π-π interactions, attraction of electrostatic and pore filling. Hence, NLACA derived from BPBL acts as a cost-effective and high-performance adsorbent and catalyst for removal of MG in dye wastewater. This concept introduces an innovative approach of "treatment of waste with waste" for developing a low-consumption, high-efficiency dye wastewater treatment and provides significant reference to treatment dye wastewater.

Nanofibrous textured silk aerogel with 3D channel arrays and adjustable mechanical properties for bone tissue regeneration.

Bone tissue engineering scaffolds are an important means of repairing bone defects, but current solutions do not adequately simulate complex extracellular microenvironment fibrous structures and adjustable mechanical properties. We use template-assisted fiber freeze-shaping technology to construct silk fibroin nanofiber aerogels (SNFAs) with nanofibrous textures and adjustable mechanical properties. The parallel arranged channels, the pores, electrospun nanofibers, and silk protein conformation together constitute the hierarchical structure of SNFAs. Especially, the introduced electrospun nanofibers formed a biomimetic nanofibrous texture similar to the extracellular matrix, providing favorable conditions for cell migration and tissue regeneration. In addition, Young's modulus of SNFAs can be adjusted freely between 7 and 88 kPa. The rationally designed 3D architecture makes SNFAs perfectly mimic the fiber structure of the extracellular matrix and can adjust its mechanical properties to match the bone tissue perfectly. Finally, fiber-containing SNFAs observably promoted cell adhesion, proliferation, and differentiation, accelerating the bone repair process. The bone density in the defect area reached 0.53 g/cm3 and the bone volume/total volume (BV/TV) ratio reached 57 % at 12 weeks, respectively. It can be expected that this kind of tissue engineering scaffold with highly simulating extracellular matrix microenvironment and adjustable mechanical properties will possess broad prospects in the field of bone repair.

Effect of Titanium Dioxide Particles on the Thermal Stability of Silica Aerogels.

Silica aerogels exhibit a unique nanostructure with low thermal conductivity and low density, making them attractive materials for thermal isolation under extreme conditions. The TiO2 particle is one of the common industrial additives used to reduce the thermal radiation of aerogel composites under high-temperature environments, but its influence on thermal resistance is almost unknown. Herein, we report the effect of TiO2 nanoparticles with different crystal phases and different sizes on the thermal stability of silica aerogel composites. By adding TiO2 nanoparticles, the aerogel can significantly resist collapse at high temperatures (up to 1000 °C). And compared with the rutile phase TiO2, the anatase phase TiO2 shows much higher temperature resistance performance, with shrinkage of only one-sixth of the rutile phase after 800 °C treatment. Interestingly, energy-dispersive spectrometer mapping results show that after 800 °C treatment, silica nanoparticles (NPs) are squeezed out in between anatase TiO2 particles, which resists the coarsening of silica NPs and ultimately enhances the stability of aerogel composites. The optimal anatase phase TiO2-doped silica aerogel demonstrates the integrated properties of crack-free morphology (2.84% shrinkage), low thermal conductivity (29.30 mW/(m·K)) and low density (149.4 mg/cm3) after 800 °C treatment. This study may provide new insights for developing oxide-doped silica aerogels with both high-temperature resistance and low thermal radiation.

Zearalenone removal using inactivated yeast embedded in porous modified yam starch aerogels and its application in corn silk tea.

Zearalenone contaminates food and poses a threat to human health. It is vital to develop cost-effective and environmentally-friendly adsorbents for its removal. By screening Sporobolomyces pararoseus (SZ4) and modified yam starch (adsorption capacity (qe) of 1.33 and 0.94 mg/g, respectively), this study prepared a novel composite aerogel adsorbent (P-YSA@SZ410). The compressive strength of P-YSA@SZ410 was 1.35-fold higher than unloaded yeast. It contained several functional groups and three-dimensional interconnected channels, achieving a 0° contact angle within 0.18 s, thereby demonstrating excellent water-absorbent properties. With a qe of 2.96 mg/g at 308 K, the adsorption process of P-YSA@SZ410 was spontaneous, endothermic, and matched pseudo-second-order and Langmuir models. The composite adsorbed zearalenone via electrostatic attraction and hydrogen bonding, maintaining a qe of 2.24 mg/g after five cycles. P-YSA@SZ410 was found to remove zearalenone effectively under various conditions and could be applied to corn silk tea, indicating its great potential as an adsorbent material.

Superelastic Polymer Aerogel with Superamphiphilicity.

Elastic aerogels have become a research hot spot in both academia and industry recently. The reported elastic aerogels are all made of hard materials by controlling their shapes. Herein we report an elastic aerogel made of a polymer elastomer with entropy elasticity. In the aerogel, cross-linked carboxyl nitrile rubber nanoparticles with hydrophilicity are dispersed in hydrophobic derivative of styrene-maleic anhydride alternating copolymer, forming a very special micro-nano surface structure with hydrophilic protrusions and hydrophobic depressions on the aerogel wall; therefore, the aerogel is not only superelastic but also superamphiphilic. A leak-free phase-change composite was prepared using the aerogel and paraffin, which can maintain at phase change temperature of paraffin for a longer time than the traditional one. The aerogel is also extremely suitable for desalination evaporators in solar-driven interfacial evaporation technology due to its superamphiphilicity, superelasticity, and ability to absorb sunlight. Exceptional evaporation rate of 2.78 kg·m-2·h-1 and evaporation efficiency of 170% could be reached even without using expensive light-absorbing materials. The evaporation rate exceeds that of most evaporators with expensive light-absorbing materials, and the evaporation efficiency exceeds the theoretical limit of conventional 2D solar evaporators. Both the phase-change composite and the evaporator can be easily recovered because the novel superelastic aerogel reported in this work is also recyclable.

Efficient solar-driven crude oil cleanup via graphene/cellulose aerogel with radial and centrosymmetric design.

Frequent oil spills pose significant threats to ecosystems; therefore, strict requirements are needed for prompt remediation and reclamation of spilled oil. Influenced by the structure of coniferous trees and their water transport, this experiment used cellulose nanofiber (CNF), polyvinyl alcohol (PVA), and methyltrimethoxysilane (MTMS) to prepare radially centrosymmetric aerogels. By utilizing the in-situ polycondensation reaction of MTMS, CNF, and PVA were connected, and the hydrophobicity and mechanical properties of the aerogel were greatly enhanced. Furthermore, the introduction of graphene oxide (GO), enshrouded within the cross-linked network, engenders heightened photo-thermal effects. The resultant composite aerogel exhibits expeditious oil absorption under solar irradiation and radial layered channel architecture, significantly curtailing the crude oil absorption timeframe (achieving a maximum absorption capacity of 51.7 g/g). Moreover, it demonstrates superior performance in rapidly and repeatedly adsorbing highly viscous crude oil, surpassing existing literature. Notably, continuous absorption of high-viscosity crude oil is achieved by integrating the composite aerogel with a peristaltic pump. This study offers a novel approach to the absorption and retrieval of high-viscosity crude oil, broadening the potential application horizons of CNF-based aerogels within environmental remediation.

Aniline tetramer conjugated N-doped graphene aerogel enabling efficient pH-universal aqueous supercapacitors.

The development of novel negative electrode (anode) materials for efficient aqueous supercapacitors (SCs) remains appealing yet significantly challenging. Here we propose an aniline tetramer conjugated nitrogen-doped graphene aerogel (AT-NGA) as the anode material, exhibiting a maximum capacitance of 699.1F g-1 under 1 A/g in 1 M H2SO4 as well as a long lifespan of 6,000 cycles at all pH levels. In particular, its capacitive contribution is 94.1 %, superior to the best pseudocapacitive materials known. To evaluate its pH-universality, we assembled three asymmetric SCs, namely, AT-NGA//1 M H2SO4//graphene aerogel, AT-NGA//1 M Na2SO4//NaMnO2-x and AT-NGA//1 M KOH//NiCoFe layered double hydroxide. The acid device delivers maximal energy and power densities of 35.8 mWh g-1 and 13.0 W/g, the neutral device achieves a maximal energy and power densities of 71.8 mWh g-1 and 33.0 W/g, and the base device exhibits a maximal energy and power densities of 48.2 mWh g-1 and 18.0 W/g, respectively. All the SCs display an outstanding cycling performance over 5,000 cycles (especially, 96 % capacitance retention for the acidic device after 12,000 cycles). Our design can also be expanded to prepare other redox-active anode materials for efficient aqueous SC applications.

Boosting bioelectricity generation in bioelectrochemical systems with nitrogen-doped three-dimensional graphene aerogel anode.

Bioelectricity generation by electrochemically active bacteria has become particularly appealing due to its vast potential in energy production, pollution treatment, and biosynthesis. However, developing high-performance anodes for bioelectricity generation remains a significant challenge. In this study, a highly efficient three-dimensional nitrogen-doped macroporous graphene aerogel anode with a nitrogen content of approximately 4.38 ± 0.50 at% was fabricated using hydrothermal method. The anode was successfully implemented in bioelectrochemical systems inoculated with Shewanella oneidensis MR-1, resulting in a significantly higher anodic current density (1.0 A/m2) compared to the control one. This enhancement was attributed to the greater biocapacity and improved extracellular electron transfer efficiency of the anode. Additionally, the N-doped aerogel anode demonstrated excellent performance in mixed-culture inoculated bioelectrochemical systems, achieving a high power density of 4.2 ± 0.2 W/m², one of the highest reported for three-dimensional carbon-based bioelectrochemical systems to date. Such improvements are likely due to the good biocompatibility of the N-doped aerogel anode, increased extracellular electron transfer efficiency at the bacteria/anode interface, and selectively enrichment of electroactive Geobacter soli within the NGA anode. Furthermore, based on gene-level Picrust2 prediction results, N-doping significantly upregulated the conductive pili-related genes of Geobacter in the three-dimensional anode, increasing the physical connection channels of bacteria, and thus strengthening the extracellular electron transfer process in Geobacter.

A solar-driven nanocellulose Janus aerogel with excellent floating stability and dual functions of oil-water separation and photocatalytic degradation of organic pollutants.

Effective and practical cleanup of viscous crude oil spills is extremely important in real harsh marine environments. Herein, we designed a solar-driven, nanocellulose-based Janus aerogel (Janus-A) with excellent floating stability and dual function of oil-water separation and degradation of aqueous organic pollutants. Janus-A, with its amphiprotic nature, was prepared through polypyrrole (PPy) deposition, freeze-drying, octyltrichlorosilane (OTS) impregnation, TiO2 spraying on the bottom surface, and UV irradiation treatment. The photothermal conversion effect of PPy coating raised the surface temperature of aerogel to 75.8 °C within 6 min under one simulated solar irradiation, which greatly reduced the viscosity of the crude oil and increased the absorption capacity of the aerogel to 36.7 g/g. Benefiting from the balance between the buoyancy generated by the hydrophobic part and water absorption of the hydrophilic part, Janus-A showed excellent floating stability under simulated winds and waves. In addition, Janus-A exhibited high degradation efficiency for organic pollutants in water owing to the synergistic photocatalytic properties of TiO2 and PPy. These excellent performances make Janus-A ideal for integrated water-oil separation and water remediation.

An ultrasensitive electrochemical method for rapid detection of mercury based on nanoporous gold capped with a novel Zr-MOF-SH/reduced graphene oxide aerogel composites.

In this work, an ultrasensitive electrochemical sensor based on Zr-MOF-SH/rGA/NPG was developed for the first time for the rapid determination of mercury ions. First, nanoporous gold (NPG) film was covered on the glassy carbon electrode (GCE) to offer a desirable substrate. Then, Zr-MOF-SH/rGA composites were dropped on the NPG film to form a modified electrode. Mercapto functionalized MOFs (Zr-MOF-SH) showed strong adsorption capability toward mercury ions, and the unique structure of reduced graphene oxide aerogel (rGA) provided various sites for coupling with Zr-MOF-SH as well as improved the electrochemical activity. As a consequence of the synergistic effect of Zr-MOF-SH, rGA, and NPG, the optimized Zr-MOF-SH/rGA/NPG/GCE sensor showed excellent detection performance toward mercury ions with a linear range from 0 to 200 nM and a low limit of detection of 1.4 nM. Meanwhile, the fabricated electrochemical sensor exhibited outstanding stability, reproducibility, and anti-interference ability. To verify the practical applicability, the Zr-MOF-SH/rGA/NPG/GCE was applied for the determination of mercury ions in real rice samples with desirable recovery rates ranging from 98.8% to 108.3%.

Tree-Inspired Aerogel Comprising Nonoxidized Graphene Flakes and Cellulose as Solar Absorber for Efficient Water Generation.

As global freshwater shortages worsen, solar steam generation (SSG) emerges as a promising, eco-friendly, and cost-effective solution for water purification. However, widespread SSG implementation requires efficient photothermal materials and solar evaporators that integrate enhanced light-to-heat conversion, rapid water transportation, and optimal thermal management. This study investigates using nonoxidized graphene flakes (NOGF) with negligible defects as photothermal materials capable of absorbing over 98% of sunlight. By combining NOGF with cellulose nanofibers (CNF) through bidirectional freeze casting, we created a vertically and radially aligned solar evaporator. The hybrid aerogel exhibited exceptional solar absorption, efficient solar-to-thermal conversion, and improved surface wettability. Inspired by tree structures, our design ensures rapid water supply while minimizing heat loss. With low NOGF content (∼10.0%), the NOGF/CNF aerogel achieves a solar steam generation rate of 2.39 kg m-2 h-1 with an energy conversion efficiency of 93.7% under 1-sun illumination, promising applications in seawater desalination and wastewater purification.

Structural Regulation of Au-Pt Bimetallic Aerogels for Catalyzing the Glucose Cascade Reaction.

Bimetallic nanostructures are promising candidates for the development of enzyme-mimics, yet the deciphering of the structural impact on their catalytic properties poses significant challenges. By leveraging the structural versatility of nanocrystal aerogels, this study reports a precise control of Au-Pt bimetallic structures in three representative structural configurations, including segregated, alloy, and core-shell structures. Benefiting from a synergistic effect, these bimetallic aerogels demonstrate improved peroxidase- and glucose oxidase-like catalytic performances compared to their monometallic counterparts, unleashing tremendous potential in catalyzing the glucose cascade reaction. Notably, the segregated Au-Pt aerogel shows optimal catalytic activity, which is 2.80 and 3.35 times higher than that of the alloy and core-shell variants, respectively. This enhanced activity is attributed to the high-density Au-Pt interface boundaries within the segregated structure, which foster greater substrate affinity and superior catalytic efficiency. This work not only sheds light on the structure-property relationship of bimetallic catalysts but also broadens the application scope of aerogels in biosensing and biological detections.

Adsorbent based on MOF-5/cellulose aerogel composite for adsorption of organic dyes from wastewater.

Industries persistently contribute to environmental pollution by releasing a multitude of harmful substances, including organic dyes, which represent a significant hazard to human health. As a result, the demand for effective adsorbents in wastewater treatment technology is steadily increasing so as to mitigate or eradicate these environmental risks. In response to this challenge, we have developed an advanced composite known as MOF-5/Cellulose aerogel, utilizing the Pampas plant as a natural material in the production of cellulose aerogel. Our investigation focused on analyzing the adsorption and flexibility characteristics of this novel composite for organic dye removal. Additionally, we conducted tests to assess the aerogel's reusability and determined that its absorption rate remained consistent, with the adsorption capacity of the MOF-5/cellulose aerogel composite only experiencing a marginal 5% reduction. Characterization of the material was conducted through XRD analysis, revealing the cubic structure of MOF aerogel particles under scanning electron microscopy. Our study unequivocally demonstrates the superior adsorption capabilities of the MOF-5/cellulose aerogel composite, particularly evident in its efficient removal of acid blue dye, as evaluated meticulously using UV-Vis spectrophotometric techniques. Notably, our findings revealed an impressive 96% absorption rate for the anionic dye under acidic pH conditions. Furthermore, the synthesized MOF-5/cellulose aerogel composite exhibited Langmuir isotherm behavior and followed pseudo-second-order kinetics during the absorption process. With its remarkable absorption efficiency, MOF-5/cellulose aerogel composites are poised to emerge as leading adsorbents for water purification and various other applications.

Advancements in Aerogel Technology for Antimicrobial Therapy: A Review.

This paper explores the latest advancements in aerogel technology for antimicrobial therapy, revealing their interesting capacity that could improve the current medical approaches for antimicrobial treatments. Aerogels are attractive matrices because they can have an antimicrobial effect on their own, but they can also provide efficient delivery of antimicrobial compounds. Their interesting properties, such as high porosity, ultra-lightweight, and large surface area, make them suitable for such applications. The fundamentals of aerogels and mechanisms of action are discussed. The paper also highlights aerogels' importance in addressing current pressing challenges related to infection management, like the limited drug delivery alternatives and growing resistance to antimicrobial agents. It also covers the potential applications of aerogels in antimicrobial therapy and their possible limitations.

Random Field Ising Model Criticality in a Complex Binary Liquid System.

While Ising criticality in classical liquids has been firmly established both theoretically and experimentally, much less is known about criticality in liquids in which the growth of the correlation length is frustrated by finite-size effects. A theoretical approach for dealing with this issue is the random-field Ising model (RFIM). While experimental critical-exponent values have been reported for magnetic samples (here, we consider γ, ν and η), little experimental information is available for critical fluctuations in corresponding liquid systems. In this paper, we present a study on a binary liquid consisting of 3-methyl pyridine and heavy water in a very light-weight porous gel. We find that the experimental results are in agreement with the theoretical predictions from the RFIM.

One-Pot Synthesis of Cellulose-Based Carbon Aerogel Loaded with TiO2 and g-C3N4 and Its Photocatalytic Degradation of Rhodamine B.

A cellulose-based carbon aerogel (CTN) loaded with titanium dioxide (TiO2) and graphitic carbon nitride (g-C3N4) was prepared using sol-gel, freeze-drying, and high-temperature carbonization methods. The formation of the sol-gel was carried out through a one-pot method using refining papermaking pulp, tetrabutyl titanate, and urea as raw materials and hectorite as a cross-linking and reinforcing agent. Due to the cross-linking ability of hectorite, the carbonized aerogel maintained a porous structure and had a large specific surface area with low density (0.0209 g/cm3). The analysis of XRD, XPS, and Raman spectra revealed that the titanium dioxide (TiO2) and graphitic carbon nitride (g-C3N4) were uniformly distributed in the CTN, while TEM and SEM observations demonstrated the uniformly distributed three-dimensional porous structure of CTN. The photocatalytic activity of the CTN was determined according to its ability to degrade rhodamine B. The removal rate reached 89% under visible light after 120 min. In addition, the CTN was still stable after five reuse cycles. The proposed catalyst exhibits excellent photocatalytic performance under visible light conditions.

Double-Phase-Networking Polyimide Hybrid Aerogel with Exceptional Dimensional Stability for Superior Thermal Protection System.

Polyimide aerogels have been extensively used in thermal protection domain because they possess a combination of intrinsic characteristics of aerogels and unique features of polyimide. However, polyimide aerogels still suffer significant thermally induced shrinkage at temperatures above 200 °C, restricting their application at high temperature. Here, a novel "double-phase-networking" strategy is proposed for fabricating a lightweight and mechanically robust polyimide hybrid aerogel by forming silica-zirconia-phase networking skeletons, which possess exceptional dimensional stability in high-temperature environments and superior thermal insulation. The rational mechanism responsible for the formation of double-phase-networking aerogel is further explained, generally attributing to chemical crosslinking reactions and supramolecular hydrogen bond interactions derived from the main chains of polyimide and silane/zirconia precursor/sol. The as-prepared aerogels exhibit excellent high-temperature (270 °C) dimensional stability (5.09% ± 0.16%), anti-thermal-shock properties, and low thermal conductivity. Moreover, the hydrophobic treatment provides aerogels high water resistance with water contact angle of 136.9°, further suggestive of low moisture content of 3.6% after exposure to 70 °C and 85% relative humidity for 64 h. The proposed solution for significantly enhancing high-temperature dimensional stability and thermal insulation provides a great supporting foundation for fabricating high-performance organic aerogels as thermal protection materials in aerospace.