Advancing Thrombosis Research: A Novel Device for Measuring Clot Permeability.

Thromboembolism, a global leading cause of mortality, needs accurate risk assessment for effective prophylaxis and treatment. Current stratification methods fall short in predicting thrombotic events, emphasizing the need for a deeper understanding of clot properties. Fibrin clot permeability, a crucial parameter in hypercoagulable states, impacts clot structure and resistance to lysis. Current clot permeability measurement limitations propel the need for standardized methods. Prior findings underscore the importance of clot permeability in various thrombotic conditions but call for improvements and more precise, repeatable, and standardized methods. Addressing these challenges, our study presents an upgraded, portable, and cost-effective system for measuring blood clot permeability, which utilizes a pressure-based approach that adheres to Darcy's law. By enhancing precision and sensitivity in discerning clot characteristics, this innovation provides a valuable tool for assessing thrombotic risk and associated pathological conditions. In this paper, the authors present a device that is able to automatically perform the permeability measurements on plasma or fibrinogen in vitro-induced clots on specific holders (filters). The proposed device has been tailored to distinguish clot permeability, with high precision and sensitivity, between healthy subjects and high cardiovascular-risk patients. The precise measure of clot permeability represents an excellent indicator of thrombotic risk, thus allowing the clinician, also on the basis of other anamnestic and laboratory data, to attribute a risk score to the subject. The proposed instrument was characterized by performing permeability measurements in plasma and purified fibrinogen clots derived from 17 Behcet patients and 15 sex- and age-matched controls. As expected, our results clearly indicate a significant difference in plasma clot permeability in Behcet patients with respect to controls (0.0533 ± 0.0199 d vs. 0.0976 ± 0.0160 d, p < 0.001). This difference was confirmed in the patient's vs. control fibrin clots (0.0487 ± 0.0170 d vs. 0.1167 ± 0.0487 d, p < 0.001). In conclusion, our study demonstrates the feasibility, efficacy, portability, and cost-effectiveness of a novel device for measuring clot permeability, allowing healthcare providers to better stratify thrombotic risk and tailor interventions, thereby improving patient outcomes and reducing healthcare costs, which could significantly improve the management of thromboembolic diseases.

Ischemic Stroke Outcome Predicted by Serum Albumin Levels.

OBJECTIVE AND AIM:  This research aims to assess the predictive importance of serum albumin levels in individuals who have recently experienced an acute ischemic stroke and to establish a correlation between these two variables. MATERIALS AND METHODS: A prospective hospital-based investigation with 50 participants was conducted after receiving ethical approval from Sunshine Hospital, Hyderabad, India. Patients older than 18 years old who had radiological or clinical evidence of having suffered an acute ischemic stroke were considered for participation in the research. RESULTS:  Albumin levels in the blood are typically about 3.6 g/dL. One patient between the ages of 46 and 55 had low serum albumin levels. Many people in both groups had albumin levels of about 4.4. Serum albumin concentration was measured using the modified Rankin Scale (mRS). After one week and three months, 32 patients had mRS values of less than three, whereas 16 had mRS values of greater than three-one; the individual presented with an mRS value over 3, as well as a blood albumin level below 3.5. The p-value ended up being 0.428. No link could be supported by the statistical evidence identified. P = 0.249 indicated no association between serum albumin and National Institutes of Health Stroke Scale (NIHSS) scores. According to the findings of this inquiry, there is no correlation between the amounts of albumin in the blood and the NIHSS scores. CONCLUSION: This study did not find a correlation between higher blood albumin levels and a worse outcome after an ischemic stroke. It contradicts the corpus of current knowledge.

Optimizing inferior vena cava filter design: A computational fluid dynamics study on strut configuration for enhanced hemodynamic performance and thrombosis reduction.

Background and objective: Inferior vena cava filters have been shown to be effective in preventing deep vein thrombosis and its secondary complication, pulmonary embolism, thereby reducing the high mortality rate. Although inferior vena cava filters have evolved, specific complications like inferior vena cava thrombosis-induced deep vein thrombosis worsening and recurrent pulmonary embolism continue to pose challenges. This study analyzes the effects of geometric parameter variations of inferior vena cava filters, which have a significant impact on the thrombus formation inside the filter, the capture, dissolution, and hemodynamic flow of thrombus, as well as the shear stress on the filter and vascular wall. Methods: This study used computational fluid dynamic simulations with the carreau model to investigate the impact of varying inferior vena cava filter design parameters (number of struts, strut arm length, and tilt angle) on hemodynamics. Results: Recirculation and stagnation areas due to flow velocity and pressure, along with wall shear stress values, were identified as key factors. It is important to find a balance between wall shear stress high enough to aid thrombolysis and low enough to prevent platelet activation. The results of this paper show that the risk of platelet activation and thrombus filtration may be lowest when the wall shear stress of the filter ranges from 0 to 4 [Pa], minimizing stress concentration within the filter. Conclusion: 16 arm struts with a length of 20 mm and a tilt angle of 0° provide the best balance between thrombus capture and minimization of hemodynamic disturbance. This configuration minimizes the size of the stagnation and recirculation zones while maintaining sufficient wall shear stress for thrombus dissolution.

Nerve Reconstruction Using ActiGraft Blood Clot in Rabbit Acute Peripheral Injury Model: Preliminary Study.

This preliminary study aimed to investigate an ActiGraft blood clot implant (RedDress Ltd., Pardes-Hanna, Israel) attempting to treat and induce the regeneration of a completely injured peripheral nerve with a massive loss defect. The tibial portion of the sciatic nerve in 11 rabbits was transected, and a 25 mm nerve gap was reconnected using a collagen tube. A comparison was performed between the treatment group (eight rabbits; reconnection using a tube filled with ActiGraft blood clot) and the control group (three rabbits; gap reconnection using an empty tube). The post-operative follow-up period lasted 18 weeks and included electrophysiological and histochemical assessments. The pathological severity score was high in the tube cross sections of the control group (1.33) compared to the ActiGraft blood clot treatment group (0.63). Morphometric analysis showed a higher percentage of the positive myelin basic protein (MBP) stained area in the ActiGraft blood clot group (19.57%) versus the control group (3.67%). These differences were not statistically significant due to the small group sizes and the large intra-group variability. The results of this preliminary study suggest that the application of an ActiGraft blood clot (into the collagen tube) can enable nerve recovery. However, a future study using a larger animal group is required to achieve objective statistical results.

Aortic thrombosis and acute kidney injury due to atherosclerosis in a dog.

OBJECTIVE: Atherosclerosis is a chronic lipid-driven inflammatory disease of the arterial wall. Due to its cardiovascular ischemic complications, it is one of the most common causes of death in people. However, atherosclerosis is seldomly reported in dogs. ANIMAL: A 10-year-old male mixed-breed dog. CLINICAL PRESENTATION, PROGRESSION, AND PROCEDURES: Severe acute kidney injury associated with thrombosis of the abdominal aorta. TREATMENT AND OUTCOME: Treatment included renal replacement therapy, antithrombotic therapy, and supportive care. However, the dog developed neurological and respiratory complications and was euthanized due to worsening kidney function and lack of improvement of the thrombosis. Postmortem examination confirmed the presence of aortic thromboembolism and renal infarcts. Histology revealed severe chronic-active atherosclerosis of the distal aorta and renal arteries. CLINICAL RELEVANCE: Aortic thrombosis is uncommon in dogs, and it is often associated with underlying conditions such as protein-losing nephropathy, endocrine disorders, cardiac disease, or hypercoagulability. In this case, no specific underlying cause was identified and atherosclerosis was considered the primary cause of the thrombosis.

Evaluation of DNA extracted from residual blood clots after serological testing.

DNA quality is of paramount importance for molecular biology research. This study aimed to assess the DNA extracted from residual blood clots after serological testing, focusing on the impact of blood clot segments, extraction kits, temporary storage durations (TSDs), and thawing methods on DNA quality. We divided the residual blood clot column (BCC) from healthy donors into three segments and utilized two different extraction kits. The BCCs were subjected to four TSDs at 4°C (7 days, 10 days, 1 month, and 2 months) and three thawing methods (4°C, room temperature, and 37°C). We found that the TIANamp Blood Clot DNA Kit yielded consistently high-quality DNA from each segment with stable A260/280 and A260/230 ratios. The DNA yield showed a strong positive correlation with leukocyte concentration, and a satisfactory median DNA yield of 28.79 µg/g BCC was obtained across all segments. DNA integrity, as measured by the DNA integrity number and DNA fragment peak size, decreased with increasing TSD at 4°C, with a notable decrease after 10 days of storage. Thawing at 37°C resulted in the lowest DNA fragment peak size. In conclusion, BCC could be an ideal DNA source with satisfactory yield and purity. A prolonged TSD at 4°C leads to an obvious decrease in DNA integrity, and thawing the frozen BCC at 37°C decreases DNA fragment sizes. To maintain DNA integrity, BCCs should be cryopreserved as soon as possible after short TSDs at 4°C and thawed at 4°C.

Contribution of Red Blood Cells and Platelets to Blood Clot Computed Tomography Imaging and Compressive Mechanical Characteristics.

Thrombus computed tomography (CT) imaging characteristics may correspond with thrombus mechanical properties and thus predict thrombectomy success. The impact of red blood cell (RBC) content on these properties (imaging and mechanics) has been widely studied. However, the additional effect of platelets has not been considered. The objective of the current study was to examine the individual and combined effects of blood clot RBC and platelet content on resultant CT imaging and mechanical characteristics. Human blood clot analogues were prepared from a combination of preselected RBC volumes and platelet concentrations to decouple their contributions. The resulting clot RBC content (%) and platelet content (%) were determined using Martius Scarlet Blue and CD42b staining, respectively. Non-contrast and contrast-enhanced CT (NCCT and CECT) scans were performed to measure the clot densities. CECT density increase was taken as a proxy for clinical perviousness. Unconfined compressive mechanics were analysed by performing 10 cycles of 80% strain. RBC content is the major determinant of clot NCCT density. However, additional consideration of the platelet content improves the association. CECT density increase is influenced by clot platelet and not RBC content. Platelet content is the dominant component driving clot stiffness, especially at high strains. Both RBC and platelet content contribute to the clot's viscoelastic and plastic compressive properties. The current in vitro results suggest that CT density is reflective of RBC content and subsequent clot viscoelasticity and plasticity, and that perviousness reflects the clot's platelet content and subsequent stiffness. However, these indications should be confirmed in a clinical stroke cohort.

Contribution of staphylococcal virulence factors in the pathogenesis of thrombosis.

Staphylococci are responsible for many infections in humans, starting with skin and soft tissue infections and finishing with invasive diseases such as endocarditis, sepsis and pneumonia, which lead to high mortality. Patients with sepsis often demonstrate activated clotting pathways, decreased levels of anticoagulants, decreased fibrinolysis, activated endothelial surfaces and activated platelets. This results in disseminated intravascular coagulation and formation of a microthrombus, which can lead to a multiorgan failure. This review describes various staphylococcal virulence factors that contribute to vascular thrombosis, including deep vein thrombosis in infected patients. The article presents mechanisms of action of different factors released by bacteria in various host defense lines, which in turn can lead to formation of blood clots in the vessels.

Detection of Blood Clots Using a Whole Stent as an Active Implantable Biosensor.

Many cardiovascular problems stem from blockages that form within the vasculature and often treatment includes fitting a stent through percutaneous coronary intervention. This offers a minimally invasive therapy but re-occlusion through restenosis or thrombosis formation often occurs post-deployment. Research is ongoing into the creation of smart stents that can detect the occurrence of further problems. In this study, it is shown that selectively metalizing a non-conductive stent can create a set of electrodes that are capable of detecting a build-up of material around the stent. The associated increase in electrical impedance across the electrodes is measured, testing the stent with blood clot to mimic thrombosis. It is shown that the device is capable of sensing different amounts of occlusion. The stent can reproducibly sense the presence of clot showing a 16% +/-3% increase in impedance which is sufficient to reliably detect the clot when surrounded by explanted aorta (one sample t-test, p = 0.009, n = 9). It is demonstrated that this approach can be extended beyond the 3D printed prototypes by showing that it can be applied to a commercially available stent and it is believed that it can be further utilized by other types of medical implants.

Microfabricated Nitinol Stent Retrievers with a Micro-Patterned Surface.

Stent retrievers are medical devices that are designed to physically remove blood clots from within the blood vessels of the brain. This paper focuses on microfabricated nitinol (nickel-titanium alloy) stent retrievers, which feature micro-patterns on their surface to enhance the effectiveness of mechanical thrombectomy. A thick film of nitinol, which was 20 µm in thickness, was sputtered onto a substrate with a micro-patterned surface, using electroplated copper as the sacrificial layer. The nitinol film was released from the substrate and then thermally treated while folded into a cylindrical shape. In vitro experiments with pig blood clots demonstrated that the micro-patterns on the surface improved the efficacy of blood clot retrieval.

Numerical study of ultra-large von Willebrand factor multimers in coagulopathy.

An excessive von Willebrand factor (VWF) secretion, coupled with a moderate to severe deficiency of ADAMTS13 activity, serves as a linking mechanism between inflammation to thrombosis. The former facilitates platelet adhesion to the vessel wall and the latter is required to cleave VWF multimers. As a result, the ultra-large VWF (UL-VWF) multimers released by Weibel-Palade bodies remain uncleaved. In this study, using a computational model based on first principles, we quantitatively show how the uncleaved UL-VWF multimers interact with the blood cells to initiate microthrombosis. We observed that platelets first adhere to unfolded and stretched uncleaved UL-VWF multimers anchored to the microvessel wall. By the end of this initial adhesion phase, the UL-VWF multimers and platelets make a mesh-like trap in which the red blood cells increasingly accumulate to initiate a gradually growing microthrombosis. Although high-shear rate and blood flow velocity are required to activate platelets and unfold the UL-VWFs, during the initial adhesion phase, the blood velocity drastically drops after thrombosis, and as a result, the wall shear stress is elevated near UL-VWF roots, and the pressure drops up to 6 times of the healthy condition. As the time passes, these trends progressively continue until the microthrombosis fully develops and the effective size of the microthrombosis and these flow quantities remain almost constant. Our findings quantitatively demonstrate the potential role of UL-VWF in coagulopathy.

Case report: Total obstruction of the left main bronchus by a blood clot leads to pneumonectomy in a pregnant woman.

Introduction and importance: Airway obstruction resulting from blood clot formation is observed across various clinical scenarios and is often preceded by hemoptysis. This condition can significantly compromise respiratory function, potentially leading to life-threatening ventilatory distress. Case presentation: In this report, the authors present a case of acute airway obstruction associated with hemoptysis in an 18-week pregnant woman admitted to the emergency department for acute respiratory distress. Clinical and radiographic evidence strongly suggested the presence of an endobronchial blood clot causing focal airway obstruction. Diagnosis was confirmed through direct endoscopic evaluation. Clinical discussion: Initial attempts to remove the obstructing clot from the airway involved lavage, aspiration, and forceps extraction by using a bronchoscope. In cases in which these measures proved ineffective, other management strategies include rigid bronchoscopy, embolization, and surgical resection. Conclusion: Central airway obstruction is a critical condition caused by numerous factors such as tumours or blood clots. Treatment focuses on securing the airway, ensuring breathing, and using tools such as bronchoscopy for diagnosis and treatment. Surgery is considered a last resort when other methods are ineffective.

Decoding thrombosis through code: a review of computational models.

From the molecular level up to a blood vessel, thrombosis and hemostasis involves many interconnected biochemical and biophysical processes over a wide range of length and time scales. Computational modeling has gained eminence in offering insights into these processes beyond what can be obtained from in vitro or in vivo experiments, or clinical measurements. The multiscale and multiphysics nature of thrombosis has inspired a wide range of modeling approaches that aim to address how a thrombus forms and dismantles. Here, we review recent advances in computational modeling with a focus on platelet-based thrombosis. We attempt to summarize the diverse range of modeling efforts straddling the wide-spectrum of physical phenomena, length scales, and time scales; highlighting key advancements and insights from existing studies. Potential information gleaned from models is discussed, ranging from identification of thrombus-prone regions in patient-specific vasculature to modeling thrombus deformation and embolization in response to fluid forces. Furthermore, we highlight several limitations of current models, future directions in the field, and opportunities for clinical translation, to illustrate the state-of-the-art. There are a plethora of opportunity areas for which models can be expanded, ranging from topics of thromboinflammation to platelet production and clearance. Through successes demonstrated in existing studies described here, as well as continued advancements in computational methodologies and computer processing speeds and memory, in silico investigations in thrombosis are poised to bring about significant knowledge growth in the years to come.

Effect of EDTA Activation on Blood Clot Structure in Regenerative Endodontics: A Scanning Electron Microscopy Study.

INTRODUCTION: EDTA plays a crucial role in regenerative endodontic therapy (RET) because of its significant biological effects. However, EDTA is also recognized as the preferred anticoagulant for hematologic tests. Thus, this study aimed to assess the influence of different EDTA activation techniques on the morphology of blood clots after conditioning the root canal dentin. METHODS: Forty extracted human teeth were prepared to simulate immature teeth and divided into the following 5 groups: (1) saline solution (negative control), (2) EDTA 17% + saline solution (CNI), (3) CNI + ultrasonic activation, (4) CNI + Easy clean activation, and (5) CNI + XP-endo Finisher activation. After irrigation, the roots were cleaved, and the root canals were filled with human blood to clot formation. The morphology and density of erythrocytes, platelets, and the fibrin network were observed using a scanning electron microscope. The fibrin network density was classified using a 4-point scale. Data were analyzed using the Friedman test and the Kruskal-Wallis test with Bonferroni adjustment (α = 5%). RESULTS: All groups exhibited consistent blood clot morphology characterized by a high density of erythrocytes, platelets, and white blood cells throughout the entire length of the root canal. The negative control group showed statistically significant high scores of fibrin density compared with the CNI group in all root thirds (P < .05). However, there was no statistical difference in the scores for the fibrin network density between the groups irrigated with EDTA with and without activation (P > .05). CONCLUSIONS: EDTA may impair the fibrin network formation compared with the saline group. However, EDTA activation did not significantly change the effects on the blood clot in contact with the conditioned intraradicular dentin.

Fast screening using attenuated total reflectance- fourier transform infrared (ATR-FTIR) spectroscopy of patients based on D-dimer threshold value.

Attenuated Total Reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy is an emerging technology in the medical field. Blood D-dimer was initially studied as a marker of the activation of coagulation and fibrinolysis. It is mainly used as a potential diagnosis screening test for pulmonary embolism or deep vein thrombosis but was recently associated with COVID-19 severity. This study aimed to evaluate the use of ATR-FTIR spectroscopy with machine learning to classify plasma D-dimer concentrations. The plasma ATR-FTIR spectra from 100 patients were studied through principal component analysis (PCA) and two supervised approaches: genetic algorithm with linear discriminant analysis (GA-LDA) and partial least squares with linear discriminant (PLS-DA). The spectra were truncated to the fingerprint region (1800-1000 cm-1). The GA-LDA method effectively classified patients according to D-dimer cutoff (≤0.5 µg/mL and >0.5 µg/mL) with 87.5 % specificity and 100 % sensitivity on the training set, and 85.7 % specificity, and 95.6 % sensitivity on the test set. Thus, we demonstrate that ATR-FTIR spectroscopy might be an important additional tool for classifying patients according to D-dimer values. ATR-FTIR spectral analyses associated with clinical evidence can contribute to a faster and more accurate medical diagnosis, reduce patient morbidity, and save resources and demand for professionals.

The Effect of Blood Clots on the Quality of RNA Extracted from PAXgene Blood RNA Tubes.

Background: PAXgene® Blood RNA tubes are routinely used in clinical research and molecular biology applications to preserve the stability of RNA in whole blood. However, in practice, blood clots are occasionally observed after blood collection and are often ignored. Currently, there are few studies on whether blood clots affect the quality of RNA extracted from these tubes. Materials and Methods: Fifteen pairs of non-clot and clot PAXgene Blood RNA tube samples (n = 30) were collected to form two matched groups from 15 patients. According to the maximum diameter (d) of the blood clot observed visually at the time of sample reception, the clot groups were divided into a small-clot group (0 cm < d < 0.5 cm) and a large-clot group (d ≥ 0.5 cm). RNA was extracted by the PAXgene Blood RNA Kit. To analyze the quality of RNA, its yield and purity were assessed by spectrophotometry, and integrity was measured by microfluidic electrophoresis. An A260/280 ratio between 1.8 and 2.2 indicated purified RNA, and RNA integrity number (RIN) values ≥7.0 were considered to represent qualified integrity. Results: The median yields of RNA from the non-clot and clot groups were 3.84 (2.80-6.38) µg and 4.87 (2.77-8.30) µg, respectively. The median A260/280 ratios were 2.08 (2.06-2.09) and 2.09 (2.07-2.11), whereas the median A260/230 ratios were 1.77 (1.31-1.91) and 1.67 (1.21-1.94) in the two groups. In addition, the median RINs were 8.20 (8.00-8.40) and 7.20 (6.60-7.70), respectively. There were no significant differences in RNA yields, A260/280, or A260/230 between the two groups. However, the RIN value of the clot group was significantly lower compared with the non-clot group (p < 0.05), with RIN ≥7.0 found in all non-clot samples and 60% of clot samples (p < 0.05). Furthermore, in the clot groups, the small-clot samples had higher RIN values than large-clot samples (8.25 [7.75-8.75] vs. 6.90 [6.60-7.30], p < 0.001). Conclusions: The formation of large blood clots in PAXgene Blood RNA tubes will reduce the integrity of extracted RNA.

Resonance, Velocity, Dispersion, and Attenuation of Ultrasound-Induced Shear Wave Propagation in Blood Clot In Vitro Models.

OBJECTIVE: Improve the characterization of mechanical properties of blood clots. Parameters derived from shear wave (SW) velocity and SW amplitude spectra were determined for gel phantoms and in vitro blood clots. METHODS: Homogeneous phantoms and phantoms with gel or blood clot inclusions of different diameters and mechanical properties were analyzed. SW amplitude spectra were used to observe resonant peaks. Parameters derived from those resonant peaks were related to mimicked blood clot properties. Three regions of interest were tested to analyze where resonances occurred the most. For blood experiments, 20 samples from different pigs were analyzed over time during a 110-minute coagulation period using the Young modulus, SW frequency dispersion, and SW attenuation. RESULTS: The mechanical resonance was manifested by an increase in the number of SW spectral peaks as the inclusion diameter was reduced (P < .001). In blood clot inclusions, the Young modulus increased over time during coagulation (P < .001). Descriptive spectral parameters (frequency peak, bandwidth, and distance between resonant peaks) were linearly correlated with clot elasticity values (P < .001) with R2 = .77 for the frequency peak, .60 for the bandwidth, and .48 for the distance between peaks. The SW dispersion and SW attenuation reflecting the viscous behavior of blood clots decreased over time (P < .001), mainly in the early stage of coagulation (first minutes). CONCLUSION: The confined soft inclusion configuration favored SW mechanical resonances potentially challenging the computation of spectral-based parameters, such as the SW attenuation. The impact of resonances can be reduced by properly selecting the region of interest for data analysis.

Whole blood coagulation in an ex vivo thrombus is sufficient to induce clot neutrophils to adopt a myeloid-derived suppressor cell signature and shed soluble Lox-1.

BACKGROUND: Blood clots are living tissues that release inflammatory mediators including IL-8/CXCL8 and MCP-1/CCL2. A deeper understanding of blood clots is needed to develop new therapies for prothrombotic disease states and regenerative medicine. OBJECTIVES: To identify a common transcriptional shift in cultured blood clot leukocytes. METHODS: Differential gene expression of whole blood and cultured clots (4 hours at 37 °C) was assessed by RNA sequencing (RNAseq), reverse transcriptase-polymerase chain reaction, proteomics, and histology (23 diverse healthy human donors). Cultured clot serum bioactivity was tested in endothelial barrier functional assays. RESULTS: All cultured clots developed a polymorphonuclear myeloid-derived suppressor cell (PMN-MDSC) signature, including up-regulation of OLR1 (mRNA encoding lectin-like oxidized low-density lipoprotein receptor 1 [Lox-1]), IL-8/CXCL8, CXCL2, CCL2, IL10, IL1A, SPP1, TREM1, and DUSP4/MKP. Lipopolysaccharide enhanced PMN-MDSC gene expression and specifically induced a type II interferon response with IL-6 production. Lox-1 was specifically expressed by cultured clot CD15+ neutrophils. Cultured clot neutrophils, but not activated platelets, shed copious amounts of soluble Lox-1 (sLox-1) with a donor-dependent amplitude. sLox-1 shedding was enhanced by phorbol ester and suppressed by heparin and by beta-glycerol phosphate, a phosphatase inhibitor. Cultured clot serum significantly enhanced endothelial cell monolayer barrier function, consistent with a proresolving bioactivity. CONCLUSION: This study suggests that PMN-MDSC activation is part of the innate immune response to coagulation which may have a protective role in inflammation. The cultured blood clot is an innovative thrombus model that can be used to study both sterile and nonsterile inflammatory states and could be used as a personalized medicine tool for drug screening.

Comparative Evaluation of the Regenerative Potential of Blood Clot and Platelet-rich Fibrin in Young Permanent Teeth Based on the Revised American Academy of Endodontics Clinical Considerations for Regenerative Procedure: 2016.

Aim: To compare and evaluate the regenerative potential of blood clots and platelet-rich fibrin (PRF) in IYNPT based on the revised American Academy of Endodontics (AAE) clinical considerations for regenerative endodontics 2016. Materials and methods: A total of 20 patients (7-12 years) with immature young necrotic permanent teeth were included and irrigation and disinfection were done using the revised AAE protocol. Teeth were randomly categorized into PRF scaffolding and conventional bleeding technique. The cases were followed up for 1, 3, and 6 months for clinical and radiographic evaluation. Result: At 6 months there was no significant difference between the groups in terms of clinical healing and periapical healing. A significant statistical difference was noted at the end of 6 months with respect to apical closure within the PRF group. A significant difference was seen in the increase in dentin thickness between groups with PRF showing more increase. Conclusion: The PRF scaffold can be used as it induces the regenerative potential of stem cells at the apex. How to cite this article: Prakash AJ, Naik SV, Attiguppe P. Comparative Evaluation of the Regenerative Potential of Blood Clot and Platelet-rich Fibrin in Young Permanent Teeth Based on the Revised American Academy of Endodontics Clinical Considerations for Regenerative Procedure: 2016. Int J Clin Pediatr Dent 2023;16(S-2):S149-S154.

Early Blood Clot Detection Using Forward Scattering Light Measurements Is Not Superior to Delta Pressure Measurements.

The occurrence of thrombus formation within an extracorporeal membrane oxygenator is a common complication during extracorporeal membrane oxygenation therapy and can rapidly result in a life-threatening situation due to arterial thromboembolism, causing stroke, pulmonary embolism, and limb ischemia in the patient. The standard clinical practice is to monitor the pressure at the inlet and outlet of oxygenators, indicating fulminant, obstructive clot formation indicated by an increasing pressure difference (ΔP). However, smaller blood clots at early stages are not detectable. Therefore, there is an unmet need for sensors that can detect blood clots at an early stage to minimize the associated thromboembolic risks for patients. This study aimed to evaluate if forward scattered light (FSL) measurements can be used for early blood clot detection and if it is superior to the current clinical gold standard (pressure measurements). A miniaturized in vitro test circuit, including a custom-made test chamber, was used. Heparinized human whole blood was circulated through the test circuit until clot formation occurred. Four LEDs and four photodiodes were placed along the sidewall of the test chamber in different positions for FSL measurements. The pressure monitor was connected to the inlet and the outlet to detect changes in ΔP across the test chamber. Despite several modifications in the LED positions on the test chamber, the FSL measurements could not reliably detect a blood clot within the in vitro test circuit, although the pressure measurements used as the current clinical gold standard detected fulminant clot formation in 11 independent experiments.