Trichoscopy of Central Centrifugal Cicatricial Alopecia: A Retrospective Study and Literature Review.

Introduction: Central centrifugal cicatricial alopecia (CCCA) is the most common cause of scarring alopecia in middle-aged black women. Trichoscopy is a noninvasive tool for diagnosis and follow-up of hair and scalp disorders. To date, limited studies have focused on its applicability to CCCA in existing literature. Methods: The present study aimed to describe the trichoscopic findings of 11 dark-skinned women with confirmed CCCA and provide a comprehensive discussion of our current knowledge regarding trichoscopy of this disease through a literature review. A thorough understanding of CCCA trichoscopy holds significant promise for early confirmation and treatment. Conclusion: By doing so, it is possible to mitigate the development of complications and alleviate the subsequent impact on patients' quality of life.

Osteoconductive composite membranes produced by rotary jet spinning bioresorbable PLGA for bone regeneration.

Bone defects and injuries are common, and better solutions are needed for improved regeneration and osseointegration. Bioresorbable membranes hold great potential in bone tissue engineering due to their high surface area and versatility. In this context, polymers such as poly(lactic-co-glycolic acid) (PLGA) can be combined with osteoconductive materials like hydroxyapatite (HA) nanoparticles (NPs) to create membranes with enhanced bioactivity and bone regeneration. Rotary Jet spinning (RJS) is a powerful technique to produce these composite membranes. This study presents an innovative and efficient method to obtain PLGA-HA(NPs) membranes with continuous fibers containing homogeneous HA(NPs) distribution. The membranes demonstrated stable thermal degradation, allowing HA(NPs) quantification. In addition, the PLGA-HA(NPs) presented osteoconductivity, were not cytotoxic, and had high cell adhesion when cultured with pre-osteoblastic cells. These findings demonstrate the potential of RJS to produce PLGA-HA(NPs) membranes for easy and effective application in bone regeneration.

The colorful fungi of the Chilean forests: Production, chemical characterization and possible applications of their pigments.

In Chile, as in the rest of the world, only a small fraction of the fungal diversity inhabiting the wide variety of its ecosystems is known. This diversity must hide an inestimable richness of species with interesting biotechnological potential, including fungal pigment producers. Recently, interest in filamentous fungi has increased significantly due to their importance as alternative sources of pigments and colorants that are environmentally and human health friendly. As a result, fungal pigments are gaining importance in various industrial applications, such as food, textiles, pharmaceuticals, cosmetics, etc. The increasing consumer demand for "green label" natural colorants requires the exploration of different ecosystems in search of new fungal species that are efficient producers of different pigment with a wide range of colors and ideally without the co-production of mycotoxins. However, advances are also needed in pigment production processes through fermentation, scale-up from laboratory to industrial scale, and final product formulation and marketing. In this respect, the journey is still full of challenges for scientists and entrepreneurs. This chapter describes studies on pigment-producing fungi collected in the forests of central-southern Chile. Aspects such as the exploration of potential candidates as sources of extracellular pigments, the optimization of pigment production by submerged fermentation, methods of pigment extraction and purification for subsequent chemical characterization, and formulation (by microencapsulation) for potential cosmetic applications are highlighted. This potential use is due to the outstanding bioactivity of most fungal pigments, making them interesting functional ingredients for many applications. Finally, the use of fungal pigments for textile and spalting applications is discussed.

Synthesis and Isolation of Phenol- and Thiol-Derived Epicatechin Adducts Prepared from Avocado Peel Procyanidins Using Centrifugal Partition Chromatography and the Evaluation of Their Antimicrobial and Antioxidant Activity.

Polyphenols from agro-food waste represent a valuable source of bioactive molecules that can be recovered to be used for their functional properties. Another option is to use them as starting material to generate molecules with new and better properties through semi-synthesis. A proanthocyanidin-rich (PACs) extract from avocado peels was used to prepare several semi-synthetic derivatives of epicatechin by acid cleavage in the presence of phenol and thiol nucleophiles. The adducts formed by this reaction were successfully purified using one-step centrifugal partition chromatography (CPC) and identified by chromatographic and spectroscopic methods. The nine derivatives showed a concentration-dependent free radical scavenging activity in the DPPH assay. All compounds were also tested against a panel of pathogenic bacterial strains formed by Listeria monocytogenes (ATCC 7644 and 19115), Staphylococcus aureus (ATCC 9144), Escherichia coli (ATCC 11775 and 25922), and Salmonella enterica (ATCC 13076). In addition, adducts were tested against two no-pathogenic strains, Limosilactobacillus fermentum UCO-979C and Lacticaseibacillus rhamnosus UCO-25A. Overall, thiol-derived adducts displayed antimicrobial properties and, in some specific cases, inhibited biofilm formation, particularly in Listeria monocytogenes (ATCC 7644). Interestingly, phenolic adducts were inactive against all the strains and could not inhibit its biofilm formation. Moreover, depending on the structure, in specific cases, biofilm formation was strongly promoted. These findings contribute to demonstrating that CPC is a powerful tool to isolate new semi-synthetic molecules using avocado peels as starting material for PACc extraction. These compounds represent new lead molecules with antioxidant and antimicrobial activity.

Scale-Fractal Detrended Fluctuation Analysis for Fault Diagnosis of a Centrifugal Pump and a Reciprocating Compressor.

Reciprocating compressors and centrifugal pumps are rotating machines used in industry, where fault detection is crucial for avoiding unnecessary and costly downtime. A novel method for fault classification in reciprocating compressors and multi-stage centrifugal pumps is proposed. In the feature extraction stage, raw vibration signals are processed using multi-fractal detrended fluctuation analysis (MFDFA) to extract features indicative of different types of faults. Such MFDFA features enable the training of machine learning models for classifying faults. Several classical machine learning models and a deep learning model corresponding to the convolutional neural network (CNN) are compared with respect to their classification accuracy. The cross-validation results show that all models are highly accurate for classifying the 13 types of faults in the centrifugal pump, the 17 valve faults, and the 13 multi-faults in the reciprocating compressor. The random forest subspace discriminant (RFSD) and the CNN model achieved the best results using MFDFA features calculated with quadratic approximations. The proposed method is a promising approach for fault classification in reciprocating compressors and multi-stage centrifugal pumps.

Scarring Alopecia.

African hair shaft and pigmented scalp have unique features that challenge diagnosis in scarring alopecia. In addition, Black patients may associate 2 or more types of hair disorders. Therefore, it is imperative to understand their findings thoroughly to establish a good diagnosis. Differential diagnosis on the frontal scalp includes traction alopecia and frontal fibrosing alopecia. Disorders such as central centrifugal cicatricial alopecia, fibrosing alopecia in a pattern distribution, discoid lupus erythematosus, and lichen planopilaris usually affect the middle scalp. Folliculitis decalvans, dissecting cellulitis, and acne keloidalis nuchae are the main differential diagnosis of the posterior scalp.

Central Centrifugal Cicatricial Alopecia in the Adolescent Population: An Overview of Available Literature.

Central centrifugal cicatricial alopecia (CCCA) is a lymphocytic scarring alopecia that predominantly affects women of African descent. Recent studies have demonstrated prevalence in children and adolescents, as well as Asian populations. A thorough search of Pubmed, Cochrane Database of Systematic Reviews, OVID Medline and Google Scholar was conducted using keywords such as "central centrifugal cicatricial alopecia", "scarring hair loss", "scarring alopecia", "hot comb alopecia", "pediatric" and "adolescent". The results yielded few articles in the literature that directly addressed CCCA in the adolescent population, with three articles providing details of the presentation in the form of case series and retrospective reviews. The presentation in the adolescent population was found to be varied, ranging from asymptomatic to symptomatic and involving diffuse to patchy hair loss in only the vertex and/or frontal and parietal scalp. Genetic and environmental etiologies were found to be statistically significant, and markers of metabolic dysregulation predisposing patients to diabetes mellitus and breast cancer were also uncovered. The differential diagnosis of patients who present with hair loss in the adolescent population should therefore be broad, and a low threshold for biopsies should be adopted to confirm CCCA in suspected patients. This will have future implications for reduced morbidity and public health.

Identifying the origin of acrylamide in Peruvian panela production to inform strategies for its reduction.

Maximum levels of acrylamide have been set by the European Commission (EU) 2017/2158 for several food products due to its carcinogenic properties. Although not regulated yet, European buyers are requesting maximum levels of 0.8 mg kg-1 in artisanal panela (raw cane sugar) from northern Peru. Panela in this area is produced by 600 small holder farmers and exportation guarantees a respectable price in an area with a high index of poverty. The objective here was to determine the cause of high acrylamide concentrations in panela to inform cost effective minimisation strategies. We monitored panela production from field to final product to understand the scale of the problem, identify the cause of acrylamide formation, as well as the effect of storage on its concentration. We also determined the utility of rapid kits for asparagine quantification. Our results indicate that high acrylamide levels are a widespread problem (85% of samples analysed) and there was a correlation between acrylamide and asparagine of R2 = 0.58 (p < 0.001), but not with any post-harvest processing variable. We estimate that with a concentration of asparagine of <0.1 g l-1 in sugarcane juice, the threshold set by buyers for acrylamide can be met. Potential solutions to reduce asparagine include varietal selection, improved agronomic practices and the use of asparaginase during panela production. However, any proposed measure should be applicable in the context of the rural Peru. Additionally, we confirm the utility of rapid and low-cost kits for measuring asparagine. This pioneering study provides a baseline for effective management for acrylamide minimization in panela.

Development of Nylon 6 nanofibers modified with Cyanex-272 for cobalt recovery.

With a worldwide ever increasing demand for metals, particularly for the manufacture of electronics and batteries, there is not only a concurrent need to recover these materials from their subsequent waste streams but also a need to make advancements to do this via development of more efficient and eco-friendly processes for metal recovery; solid-phase extraction can be considered a promising alternative to conventional processes. This work studied the production of novel nanofibers modified with Cyanex 272 and their application in the recovery of cobalt present in aqueous solution The nanofibers produced by forcespinning were characterized by SEM, FT-IR and TGA and the extraction of cobalt was evaluated by variation of the pH, solid:liquid (S:L) ratio, extraction time and Cyanex 272 content in the nanofibers. The best extraction efficiency was 99.96%, achieved under the following conditions: pH 8; (S:L) ratio of 1:200; 25% of Cyanex 272; Extraction time of 60 min. The maximum extraction capacity obtained was 15.46 mg Co/g of nanofiber and 70.15 mg Co/g of extractor. In successive reuse cycles, the results demonstrated that the extraction efficiency was maintained at over 85%. The findings showed that Nylon 6/Cyanex 272 nanofibers are a new robust and promising material for the recovery of heavy metals from aqueous solution, confirming that nanofibers have an efficiency similar to conventional liquid-liquid extraction, without the disadvantage of volatile organic compounds emissions generated by the use of organic diluents.

Key Drivers for Non-Centrifugal Sugar Cane Research, Technological Development, and Market Linkage: A Technological Roadmap Approach for Colombia.

Food science innovation depends on consumers' needs and is currently seeking functional food with health effects. Non-centrifugal cane sugar (NCS) is known for its potential health effects, but there is a lack of holistic analysis on technological advancement and socio-economic and market trends for decision-making in the development of the technology. The aim of this article was to analyse the research trends, recent patents, and market trends and niches for NCS to structure an NCS technological roadmap. Scientometric, bibliometric methods, and global and local market information on NCS were used. Comprehensive analysis of the worldwide research trends and patents on NCS processing and of the growth of the main niche markets for Colombian NCS exports in the last five years was conducted. Finally, with the information obtained, an NCS technological roadmap was structured, which can be used as a tool for planning innovation processes and supporting the development of new research using market information and new norms forged by the COVID-19 pandemic for Colombian case. Furthermore, the methodological design could be used for other NCS producer countries. Supplementary Information: The online version contains supplementary material available at 10.1007/s12355-022-01200-9.

Evaluating the Impact of Thermal Processing on the Anti-Inflammatory Activity of Non-Centrifugal Cane Sugar: Implications on Cytokine Secretion and TLR4 Signaling.

Plant-derived products have gained considerable attention as inflammation modulators given the wide variety of anti-inflammatory phytochemicals reported to be present in plants and their limited side effects in vivo during prolonged exposure periods. Non-centrifugal cane sugar (NCS) has been identified as a promising sugarcane-derived product due to its high polyphenolic composition and antioxidant potential, but its incorporations into nutraceuticals and other relevant products of biomedical interest has been limited by the ample composition-wise variability resulting from extreme and loosely controlled processing conditions. Here, we assessed the effect of reducing thermal exposure during NCS processing on the retained polyphenolic profiles, as well as on their antioxidant and anti-inflammatory activities. Specifically, we proposed two modified NCS production methods that reduce exposure to unwanted thermal processing conditions by 1) limiting the employed temperatures through vacuum-aided dehydration and 2) by reducing exposure time through refractance window evaporation. By comparing the modified NCS products with traditional NCS, we showed that the proposed process strategies yield enhanced polyphenolic profiles, as evidenced by the results of the Folin-Ciocalteu polyphenol quantification method and the components identification by HPLC coupled to mass spectrometry. Although these compositional differences failed to impact the antioxidant profiles and cytocompatibility of the products, they showed an enhanced anti-inflammatory potential, given their superior modulation capacity of inflammatory cytokine secretion in both systemic and neuroinflammatory scenarios in vitro. Moreover, we showed that both modified NCS products interfere with TLR4 signaling in human monocytes to a significantly greater extent than traditional NCS. However, the anti-inflammatory effect of NCS produced under window refractance evaporation was slightly superior than under vacuum-aided dehydration, demonstrating that reducing exposure time to high temperatures is likely more effective than reducing the operation temperature. Overall, these findings demonstrated that limiting thermal exposure is beneficial for the development of NCS-based natural products with superior anti-inflammatory potential, which can be further exploited in the rational design of more potent nutraceuticals for potentially preventing chronic inflammatory diseases.

Characterization of Fluidic-Barrier-Based Particle Generation in Centrifugal Microfluidics.

The fluidic barrier in centrifugal microfluidic platforms is a newly introduced concept for making multiple emulsions and microparticles. In this study, we focused on particle generation application to better characterize this method. Because the phenomenon is too fast to be captured experimentally, we employ theoretical models to show how liquid polymeric droplets pass a fluidic barrier before crosslinking. We explain how secondary flows evolve and mix the fluids within the droplets. From an experimental point of view, the effect of different parameters, such as the barrier length, source channel width, and rotational speed, on the particles' size and aspect ratio are investigated. It is demonstrated that the barrier length does not affect the particle's ultimate velocity. Unlike conventional air gaps, the barrier length does not significantly affect the aspect ratio of the produced microparticles. Eventually, we broaden this concept to two source fluids and study the importance of source channel geometry, barrier length, and rotational speed in generating two-fluid droplets.

Bioassay-Guided Fractionation of Siparuna glycycarpa n-Butanol Extract with Inhibitory Activity against Influenza A(H1N1)pdm09 Virus by Centrifugal Partition Chromatography (CPC).

Siparuna glycycarpa occurs in the Amazon region, and some species of this genus are used in Brazilian folk medicine. A recent study showed the inhibitory effect of this species against influenza A(H1N1)pdm09 virus, and in order to acquire active fractions, a polar solvent system n-butanol-methanol-water (9:1:10, v/v) was selected and used for bioassay-guided fractionation of n-butanol extract by centrifugal partition chromatography (CPC). The upper phase was used as stationary phase and the lower phase as mobile (descending mode). Among the collected fractions, the ones coded SGA, SGC, SGD, and SGO showed the highest antiviral inhibition levels (above 74%) at 100 µg·mL-1 after 24 h of infection. The bioactive fractions chemical profiles were investigated by LC-HRMS/MS data in positive and negative ionization modes exploring the Global Natural Products Social Molecular Networking (GNPS) platform to build a molecular network. Benzylisoquinoline alkaloids were annotated in the fractions coded SGA, SGC, and SGD collected during elution step. Aporphine alkaloids, O-glycosylated flavonoids, and dihydrochalcones in SGO were acquired with the change of mobile phase from lower aqueous to upper organic. Benzylisoquinolinic and aporphine alkaloids as well as glycosylated flavonoids were annotated in the most bioactive fractions suggesting this group of compounds as responsible for antiviral activity.

Evaluation of filter media covered with spun fibres and containing thyme essential oil with antimicrobial properties.

Inhalation of bioaerosols has been linked to many health problems. Filter media impregnated with antimicrobial material can provide effective removal and inactivation of bioaerosols. In this study, fibres were spun on a substrate by centrifugal spinning, obtaining filter media denoted 5THY and THY. Thyme essential oil was used as an antimicrobial agent. For 5THY, the thyme essential oil was added to the polyacrylonitrile (PAN) solution, while for THY, it was sprayed onto the medium after the fibres had been produced. The THY medium presented a higher collection efficiency, compared to the substrate or 5THY, with efficiencies of 99% for microparticles and 58% for nanoparticles. Using the plaque assay method, THY provided the highest reductions of the bacteria Escherichia coli and Staphylococcus aureus, with efficiency of 99.999%. The findings demonstrated that filter media covered with spun fibres and containing thyme essential oil provided excellent antimicrobial action and filtration performance.

Production of polyacrylonitrile nanofibres modified with Cyanex 272 for recovery of gallium from solution.

The objectives of this work were to develop polyacrylonitrile nanofibres modified with the commercial Cyanex 272 extractor and apply them for the recovery of gallium present in aqueous solution. The nanofibres were produced using the centrifugation technique, employing Forcespinning® equipment. The average nanofibre diameter ranged from 530 to 840 nm. The highest adsorption of gallium was achieved at pH 2.5, with a pseudo-second order kinetic model and the Freundlich equilibrium isotherm model providing the best fits of the experimental data. The thermodynamic parameters showed that the adsorption was spontaneous, favourable, and endothermic. The maximum capacity of the PAN/Cyanex 272 nanofibres for the recovery of gallium was 38.93 mg g-1. In successive reuse cycles, the nanofibres showed a small decrease of the adsorption capacity for the metal after the first cycle, while the efficiency remained constant in the subsequent cycles. The desorption efficiency remained constant throughout the cycles, with values in the range 80%-90%. The findings demonstrated that PAN/Cyanex 272 nanofibres have excellent potential for use as adsorbents, providing good capacity for the recovery of gallium and satisfactory stability during reuse in several cycles.

Mucilage and cellulosic derivatives as clarifiers for the improvement of the non-centrifugal sugar production process.

Non-centrifugal cane sugar (NCS) is the second most important Colombian agribusiness in social importance. However, the sugar cane industry is facing some challenges caused by the controversial nutritional and safety attributes of NCS. Some Colombian NCS producers employ natural mucilages as clarifiers; but the uncontrolled application of these components has caused a risk of extinction in the mucilage source plants. Other producers employ acrylamide as a clarifier. Health consequences have generated concerns from the consumers and demanded control from the food authorities. Efforts are being made to develop a standard manufacturing methodology to increase NCS productivity and improve its quality, hygiene, and storability. The application of better clarifiers, which provide the best clarifying activity and minimize the toxicity while conserving NCS's natural attributes, is one of the outstanding challenges as well. This study is a proposal which looks for sustainable, natural, nontoxic, and economical clarifiers for the Colombian NCS producers.

Kurtosis-based projection pursuit analysis to evaluate South American rapadura.

Rapadura is an artisanal candy obtained from concentrated sugarcane juice. In this study, a differentiation between South American rapadura producers has been tried using a Kurtosis-based projection pursuit analysis (kPPA) concerning essential minerals, acrylamide, moisture contents, pH, and color. These parameters revealed significant inter- and intra-country differences. Based on the employed measurements, a multivariate exploration with kPPA extracted information from rapadura even though it is a very artisanal product and was effective in separating classes, especially Brazilian and Ecuadorian rapadura, where principal component analysis failed. Moreover, ellipse confidence regions showed significant differences between non-organic and organic rapadura from Colombia and Peru in granulated form. From a chemometric point of view, the application of kPPA can be used in cases when other metrics (as based on the variance) fail and can be useful in the exploratory analysis of complex multivariate chemical data.

Antioxidant and Neuroprotective Properties of Non-Centrifugal Cane Sugar and Other Sugarcane Derivatives in an In Vitro Induced Parkinson's Model.

Non-centrifugal cane sugar (NCS) is a traditional sweetener in most sugarcane regions of the world. In Colombia, this product has a socio-economic importance due to the extensive cultivation area and the high consumption rate per capita. NCS traditional processing involves consecutive stages of thermal processing that begin with juice extraction, clarification, evaporation, and finish with syrup crystallization into a solid commercial product, identified as NCS. Sugarcane is known to have a natural content of polyphenols, amino acids, vitamins, minerals, and complex sugars, some of which are reported as antioxidant and antiproliferative agents thought to be responsible for the product's bioactive profile. There is evidence to suggest that traditional thermal processing to obtain NCS leads to a considerable decrease in the contents of these bioactive compounds, mainly due to uncontrolled process variables such as temperature. Accordingly, the aim of this study was to assess and compare the bioactivity of sugarcane (SC) derivatives produced under controlled thermal conditions versus the traditional method. To achieve this goal, we evaluated the cytotoxic, antioxidant, and neuroprotective effects of varying concentrations of SC derivatives in an in vitro induced Parkinson's model. Results demonstrate non-cytotoxic activity on the cellular model by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and LDH assays, even at the highest tested concentration of 8 mg/mL, for all SC derivatives. The effect of SC derivatives on the induced oxidative stress model showed a biological reversion and recovering effect of the mitochondrial membrane potential and a halting of the progress into the early apoptosis phase. In conclusion, we demonstrated that the bioactive compounds present in SC derivatives obtained by a process under controlled temperature conditions are largely preserved, and even their biological activities are enhanced compared with SC derivatives obtained by the traditional thermal evaporation of SC-juice.

Detection, Isolation, and 1H NMR Quantitation of the Nitrile Glycoside Sarmentosin from a Bryophyllum pinnatum Hydro-Ethanolic Extract.

Bryophyllum pinnatum (Lam) Pers. (Crassulaceae) is widely used in folk medicine as leaf juice, aqueous, or hydro-ethanolic extracts. It is also listed as a medicinal plant in several countries such as France and Brazil. The main reported constituents are flavone glycosides, especially those with the rare 3-O-α-l-arabinopyranosyl-(1 → 2)-α-l-rhamnopyranoside moiety. Despite several phytochemical screenings indicating the presence of cyanide derivatives or alkaloids, there are no reports of nitrogenous metabolite characterization from this plant species. Nevertheless, the occurrence and the type of such compounds are of particular interest, as they may account for some of the numerous biological activities and ethnomedicinal uses described for B. pinnatum and could be regarded as chemical/taxonomic markers. Consequently, a hydro-ethanolic extract of B. pinnatum was investigated by using UHPLC-HRMS/MS and the nitrile glucoside sarmentosin was detected for the first time within the genus Bryophyllum/Kalanchoe. Considering the wide use of B. pinnatum and its closely related species for health purposes, the target metabolite was isolated by a combination of centrifugal partition chromatography in elution/extrusion mode and MPLC in order to confirm its structure. A linear, selective, precise, fast, and reliable 1H NMR quantitation method was then developed and validated and may become a tool for easy quality assessment of the plant species. The amount of sarmentosin was determined as 2.07% of the examined sample. Sarmentosin was also detected in Kalanchoe laciniata, confirming the occurrence of this compound within the genus.

Polyphenolic Compounds Extracted and Purified from Buddleja Globosa Hope (Buddlejaceae) Leaves Using Natural Deep Eutectic Solvents and Centrifugal Partition Chromatography.

Chemical profiling of Buddleja globosa was performed by high-performance liquid chromatography coupled to electrospray ionization (HPLC-DAD-ESI-IT/MS) and quadrupole time-of-flight high-resolution mass spectrometry (HPLC-ESI-QTOF/MS). The identification of 17 main phenolic compounds in B. globosa leaf extracts was achieved. Along with caffeoyl glucoside isomers, caffeoylshikimic acid and several verbascoside derivatives (ß-hydroxyverbascoside and ß-hydroxyisoverbascoside) were identified. Among flavonoid compounds, the presence of 6-hydroxyluteolin-7-O-glucoside, quercetin-3-O-glucoside, luteolin 7-O-glucoside, apigenin 7-O-glucoside was confirmed. Campneoside I, forsythoside B, lipedoside A and forsythoside A were identified along with verbascoside, isoverbascoside, eukovoside and martynoside. The isolation of two bioactive phenolic compounds verbascoside and forsythoside B from Buddleja globosa (Buddlejaceae) was successfully achieved by centrifugal partition chromatography (CPC). Both compounds were obtained in one-step using optimized CPC methodology with the two-phase solvent system comprising ethyl acetate-n-butanol-ethanol-water (0.25:0.75:0.1:1, v/v). Additionally, eight Natural Deep Eutectic Solvents (NADESs) were tested for the extraction of polyphenols and compared with 80% methanol. The contents of verbascoside and luteolin 7-O-glucoside after extraction with 80% methanol were 26.165 and 3.206 mg/g, respectively. Among the NADESs tested in this study, proline- citric acid (1:1) and choline chloride-1, 2- propanediol (1:2) were the most promising solvents. With these NADES, extraction yields for verbascoside and luteolin 7-O-glucoside were 51.045 and 4.387 mg/g, respectively. Taken together, the results of this study confirm that CPC enabled the fast isolation of bioactive polyphenols from B. globosa. NADESs displayed higher extraction efficiency of phenolic and therefore could be used as an ecofriendly alternative to classic organic solvents.