Sugarcane disease recognition through visible and near-infrared spectroscopy using deep learning assisted continuous wavelet transform-based spectrogram.

Utilizing visible and near-infrared (Vis-NIR) spectroscopy in conjunction with chemometrics methods has been widespread for identifying plant diseases. However, a key obstacle involves the extraction of relevant spectral characteristics. This study aimed to enhance sugarcane disease recognition by combining convolutional neural network (CNN) with continuous wavelet transform (CWT) spectrograms for spectral features extraction within the Vis-NIR spectra (380-1400 nm) to improve the accuracy of sugarcane diseases recognition. Using 130 sugarcane leaf samples, the obtained one-dimensional CWT coefficients from Vis-NIR spectra were transformed into two-dimensional spectrograms. Employing CNN, spectrogram features were extracted and incorporated into decision tree, K-nearest neighbour, partial least squares discriminant analysis, and random forest (RF) calibration models. The RF model, integrating spectrogram-derived features, demonstrated the best performance with an average precision of 0.9111, sensitivity of 0.9733, specificity of 0.9791, and accuracy of 0.9487. This study may offer a non-destructive, rapid, and accurate means to detect sugarcane diseases, enabling farmers to receive timely and actionable insights on the crops' health, thus minimizing crop loss and optimizing yields.

Signal Separation Operator Based on Wavelet Transform for Non-Stationary Signal Decomposition.

This paper develops a new frame for non-stationary signal separation, which is a combination of wavelet transform, clustering strategy and local maximum approximation. We provide a rigorous mathematical theoretical analysis and prove that the proposed algorithm can estimate instantaneous frequencies and sub-signal modes from a blind source signal. The error bounds for instantaneous frequency estimation and sub-signal recovery are provided. Numerical experiments on synthetic and real data demonstrate the effectiveness and efficiency of the proposed algorithm. Our method based on wavelet transform can be extended to other time-frequency transforms, which provides a new perspective of time-frequency analysis tools in solving the non-stationary signal separation problem.

A Spectral Detection Method Based on Integrated and Partition Modeling for Trace Copper in High-Concentration Zinc Solution.

In zinc smelting solution, because the concentration of zinc is too high, the spectral signals of trace copper are masked by the spectral signals of zinc, and their spectral signals overlap, which makes it difficult to detect the concentration of trace copper. To solve this problem, a spectrophotometric method based on integrated and partition modeling is proposed. Firstly, the derivative spectra based on continuous wavelet transform are used to preprocess the spectral signal and highlight the spectral peak of copper. Then, the interval partition modeling is used to select the optimal characteristic interval of copper according to the root mean square error of prediction, and the wavelength points of the absorbance matrix are selected by correlation-coefficient threshold to improve the sensitivity and linearity of copper ions. Finally, the partial least squares integrated modeling based on the Adaboost algorithm is established by using the selected wavelength to realize the concentration detection of trace copper in the zinc liquid. Comparing the proposed method with existing regression methods, the results showed that this method can not only reduce the complexity of wavelength screening, but can also ensure the stability of detection performance. The predicted root mean square error of copper was 0.0307, the correlation coefficient was 0.9978, and the average relative error of prediction was 3.14%, which effectively realized the detection of trace copper under the background of high-concentration zinc liquid.

Automated Crack Detection in Monolithic Zirconia Crowns Using Acoustic Emission and Deep Learning Techniques.

Monolithic zirconia (MZ) crowns are widely utilized in dental restorations, particularly for substantial tooth structure loss. Inspection, tactile, and radiographic examinations can be time-consuming and error-prone, which may delay diagnosis. Consequently, an objective, automatic, and reliable process is required for identifying dental crown defects. This study aimed to explore the potential of transforming acoustic emission (AE) signals to continuous wavelet transform (CWT), combined with Conventional Neural Network (CNN) to assist in crack detection. A new CNN image segmentation model, based on multi-class semantic segmentation using Inception-ResNet-v2, was developed. Real-time detection of AE signals under loads, which induce cracking, provided significant insights into crack formation in MZ crowns. Pencil lead breaking (PLB) was used to simulate crack propagation. The CWT and CNN models were used to automate the crack classification process. The Inception-ResNet-v2 architecture with transfer learning categorized the cracks in MZ crowns into five groups: labial, palatal, incisal, left, and right. After 2000 epochs, with a learning rate of 0.0001, the model achieved an accuracy of 99.4667%, demonstrating that deep learning significantly improved the localization of cracks in MZ crowns. This development can potentially aid dentists in clinical decision-making by facilitating the early detection and prevention of crack failures.

Wasserstein generative adversarial network with gradient penalty and convolutional neural network based motor imagery EEG classification.

Objective.Due to the difficulty in acquiring motor imagery electroencephalography (MI-EEG) data and ensuring its quality, insufficient training data often leads to overfitting and inadequate generalization capabilities of deep learning-based classification networks. Therefore, we propose a novel data augmentation method and deep learning classification model to enhance the decoding performance of MI-EEG further.Approach.The raw EEG signals were transformed into the time-frequency maps as the input to the model by continuous wavelet transform. An improved Wasserstein generative adversarial network with gradient penalty data augmentation method was proposed, effectively expanding the dataset used for model training. Additionally, a concise and efficient deep learning model was designed to improve decoding performance further.Main results.It has been demonstrated through validation by multiple data evaluation methods that the proposed generative network can generate more realistic data. Experimental results on the BCI Competition IV 2a and 2b datasets and the actual collected dataset show that classification accuracies are 83.4%, 89.1% and 73.3%, and Kappa values are 0.779, 0.782 and 0.644, respectively. The results indicate that the proposed model outperforms state-of-the-art methods.Significance.Experimental results demonstrate that this method effectively enhances MI-EEG data, mitigates overfitting in classification networks, improves MI classification accuracy, and holds positive implications for MI tasks.

Fault detection and diagnosis of grid-connected photovoltaic systems using energy valley optimizer based lightweight CNN and wavelet transform.

Early fault detection and diagnosis of grid-connected photovoltaic systems (GCPS) is imperative to improve their performance and reliability. Low-cost edge devices have emerged as innovative solutions for real-time monitoring, reducing latency, and improving response times. In this work, a lightweight Convolutional Neural Network (CNN) is designed and fine-tuned using Energy Valley Optimizer (EVO) for fault diagnosis. The CNN input consists of two-dimensional scalograms generated using Continuous Wavelet Transform (CWT). The proposed diagnosis technique demonstrated superior performance compared to benchmark architectures, namely MobileNet, NASNetMobile, and InceptionV3, achieving higher test accuracies and lower losses on binary and multi-fault classification tasks on balanced, unbalanced, and noisy datasets. Further, a quantitative comparison is conducted with similar recent studies. The obtained results indicate good performance and high reliability of the proposed fault diagnosis method.

Rapid estimation of soil water content based on hyperspectral reflectance combined with continuous wavelet transform, feature extraction, and extreme learning machine.

Background: Soil water content is one of the critical indicators in agricultural systems. Visible/near-infrared hyperspectral remote sensing is an effective method for soil water estimation. However, noise removal from massive spectral datasets and effective feature extraction are challenges for achieving accurate soil water estimation using this technology. Methods: This study proposes a method for hyperspectral remote sensing soil water content estimation based on a combination of continuous wavelet transform (CWT) and competitive adaptive reweighted sampling (CARS). Hyperspectral data were collected from soil samples with different water contents prepared in the laboratory. CWT, with two wavelet basis functions (mexh and gaus2), was used to pre-process the hyperspectral reflectance to eliminate noise interference. The correlation analysis was conducted between soil water content and wavelet coefficients at ten scales. The feature variables were extracted from these wavelet coefficients using the CARS method and used as input variables to build linear and non-linear models, specifically partial least squares (PLSR) and extreme learning machine (ELM), to estimate soil water content. Results: The results showed that the correlation between wavelet coefficients and soil water content decreased as the decomposition scale increased. The corresponding bands of the extracted wavelet coefficients were mainly distributed in the near-infrared region. The non-linear model (ELM) was superior to the linear method (PLSR). ELM demonstrated satisfactory accuracy based on the feature wavelet coefficients of CWT with the mexh wavelet basis function at a decomposition scale of 1 (CWT(mexh_1)), with R2, RMSE, and RPD values of 0.946, 1.408%, and 3.759 in the validation dataset, respectively. Overall, the CWT(mexh_1)-CARS-ELM systematic modeling method was feasible and reliable for estimating the water content of sandy clay loam.

Intelligent Fault Diagnosis Method Based on Cross-Device Secondary Transfer Learning of Efficient Gated Recurrent Unit Network.

In response to the issues of low model recognition accuracy and weak generalization in mechanical equipment fault diagnosis due to scarce data, this paper proposes an innovative solution, a cross-device secondary transfer-learning method based on EGRUN (efficient gated recurrent unit network). This method utilizes continuous wavelet transform (CWT) to transform source domain data into images. The EGRUN model is initially trained, and shallow layer weights are frozen. Subsequently, random overlapping sampling is applied to the target domain data to enhance data and perform secondary transfer learning. The experimental results demonstrate that this method not only significantly improves the model's ability to learn fault features but also enhances its classification accuracy and generalization performance. Compared to current state-of-the-art algorithms, the model proposed in this study shows faster convergence speed, higher diagnostic accuracy, and superior robustness and generalization, providing an effective approach to address the challenges arising from scarce data and varying operating conditions in practical engineering scenarios.

A Robust Deep Feature Extraction Method for Human Activity Recognition Using a Wavelet Based Spectral Visualisation Technique.

Human Activity Recognition (HAR), alongside Ambient Assisted Living (AAL), are integral components of smart homes, sports, surveillance, and investigation activities. To recognize daily activities, researchers are focusing on lightweight, cost-effective, wearable sensor-based technologies as traditional vision-based technologies lack elderly privacy, a fundamental right of every human. However, it is challenging to extract potential features from 1D multi-sensor data. Thus, this research focuses on extracting distinguishable patterns and deep features from spectral images by time-frequency-domain analysis of 1D multi-sensor data. Wearable sensor data, particularly accelerator and gyroscope data, act as input signals of different daily activities, and provide potential information using time-frequency analysis. This potential time series information is mapped into spectral images through a process called use of 'scalograms', derived from the continuous wavelet transform. The deep activity features are extracted from the activity image using deep learning models such as CNN, MobileNetV3, ResNet, and GoogleNet and subsequently classified using a conventional classifier. To validate the proposed model, SisFall and PAMAP2 benchmark datasets are used. Based on the experimental results, this proposed model shows the optimal performance for activity recognition obtaining an accuracy of 98.4% for SisFall and 98.1% for PAMAP2, using Morlet as the mother wavelet with ResNet-101 and a softmax classifier, and outperforms state-of-the-art algorithms.

Wavelet Transform, Reconstructed Phase Space, and Deep Learning Neural Networks for EEG-Based Schizophrenia Detection.

This study proposes an innovative expert system that uses exclusively EEG signals to diagnose schizophrenia in its early stages. For diagnosing psychiatric/neurological disorders, electroencephalogram (EEG) testing is considered a financially viable, safe, and reliable alternative. Using the reconstructed phase space (RPS) and the continuous wavelet transform, the researchers maximized the differences between the EEG nonstationary signals of normal and schizophrenia individuals, which cannot be observed in the time, frequency, or time-frequency domains. This reveals significant information, highlighting more distinguishable features. Then, a deep learning network was trained to enhance the accuracy of the resulting image classification. The algorithm's efficacy was confirmed through three distinct methods: employing 70% of the dataset for training, 15% for validation, and the remaining 15% for testing. This was followed by a 5-fold cross-validation technique and a leave-one-out classification approach. Each method was iterated 100 times to ascertain the algorithm's robustness. The performance metrics derived from these tests - accuracy, precision, sensitivity, F1 score, Matthews correlation coefficient, and Kappa - indicated remarkable outcomes. The algorithm demonstrated steady performance across all evaluation strategies, underscoring its relevance and reliability. The outcomes validate the system's accuracy, precision, sensitivity, and robustness by showcasing its capability to autonomously differentiate individuals diagnosed with schizophrenia from those in a state of normal health.

A hybrid model for the classification of Autism Spectrum Disorder using Mu rhythm in EEG.

BACKGROUND: Autism Spectrum Disorder (ASD) is a condition with social interaction, communication, and behavioral difficulties. Diagnostic methods mostly rely on subjective evaluations and can lack objectivity. In this research Machine learning (ML) and deep learning (DL) techniques are used to enhance ASD classification. OBJECTIVE: This study focuses on improving ASD and TD classification accuracy with a minimal number of EEG channels. ML and DL models are used with EEG data, including Mu Rhythm from the Sensory Motor Cortex (SMC) for classification. METHODS: Non-linear features in time and frequency domains are extracted and ML models are applied for classification. The EEG 1D data is transformed into images using Independent Component Analysis-Second Order Blind Identification (ICA-SOBI), Spectrogram, and Continuous Wavelet Transform (CWT). RESULTS: Stacking Classifier employed with non-linear features yields precision, recall, F1-score, and accuracy rates of 78%, 79%, 78%, and 78% respectively. Including entropy and fuzzy entropy features further improves accuracy to 81.4%. In addition, DL models, employing SOBI, CWT, and spectrogram plots, achieve precision, recall, F1-score, and accuracy of 75%, 75%, 74%, and 75% respectively. The hybrid model, which combined deep learning features from spectrogram and CWT with machine learning, exhibits prominent improvement, attained precision, recall, F1-score, and accuracy of 94%, 94%, 94%, and 94% respectively. Incorporating entropy and fuzzy entropy features further improved the accuracy to 96.9%. CONCLUSIONS: This study underscores the potential of ML and DL techniques in improving the classification of ASD and TD individuals, particularly when utilizing a minimal set of EEG channels.

Auscultation-Based Pulmonary Disease Detection through Parallel Transformation and Deep Learning.

Respiratory diseases are among the leading causes of death, with many individuals in a population frequently affected by various types of pulmonary disorders. Early diagnosis and patient monitoring (traditionally involving lung auscultation) are essential for the effective management of respiratory diseases. However, the interpretation of lung sounds is a subjective and labor-intensive process that demands considerable medical expertise, and there is a good chance of misclassification. To address this problem, we propose a hybrid deep learning technique that incorporates signal processing techniques. Parallel transformation is applied to adventitious respiratory sounds, transforming lung sound signals into two distinct time-frequency scalograms: the continuous wavelet transform and the mel spectrogram. Furthermore, parallel convolutional autoencoders are employed to extract features from scalograms, and the resulting latent space features are fused into a hybrid feature pool. Finally, leveraging a long short-term memory model, a feature from the latent space is used as input for classifying various types of respiratory diseases. Our work is evaluated using the ICBHI-2017 lung sound dataset. The experimental findings indicate that our proposed method achieves promising predictive performance, with average values for accuracy, sensitivity, specificity, and F1-score of 94.16%, 89.56%, 99.10%, and 89.56%, respectively, for eight-class respiratory diseases; 79.61%, 78.55%, 92.49%, and 78.67%, respectively, for four-class diseases; and 85.61%, 83.44%, 83.44%, and 84.21%, respectively, for binary-class (normal vs. abnormal) lung sounds.

Continuous wavelet transform and integration of discrete wavelet transform with principal component analysis and fuzzy inference system for the simultaneous determination of ethinyl estradiol and drospirenone in combined oral contraceptives.

In this study, the spectrophotometric method integrated with continuous wavelet transform (CWT) and coupled discrete wavelet transform (DWT) with fuzzy inference system (FIS) was developed for the simultaneous determination of ethinyl estradiol (EE) and drospirenone (DP) in combined oral contraceptives (COCs). The CWT approach was performed in the linearity range of 0.6-6 µg/mL for EE and 0.9 to 18 µg/mL for DP. Biorthogonal with an order of 1.3 (bior1.3) at a wavelength of 216 nm and Daubechies with an order of 2 (db2) at a wavelength of 278 nm were selected as the best wavelet families for obtaining the best zero crossing point for EE and DP, respectively. The limit of detection (LOD) of 0.7677 and 0.3222 µg/mL and the limit of quantification (LOQ) of 2.326 and 0.9765 µg/mL were obtained for EE and DP, respectively. The mean recovery of 103.24% and 99.77%, as well as root mean square error (RMSE) of 0.1896 and 0.1969, were found for EE and DP, respectively. In the DWT, the absorption of the mixtures was decomposed using different wavelets named db4, db2, Symlet2 (sym2), and bior1.3. Each of the wavelet outputs was dimension reduced by the principal component analysis (PCA) method and considered as FIS input. The wavelet of db4 with the coefficient of determination (R2) of 0.9979, RMSE of 0.0968, and mean recovery of 100.63% was chosen as the best one for the EE, while bior1.3 with R2 of 0.9955, RMSE of 0.4055, and mean recovery of 101.93% was selected for DP. These methods were successfully used to analyze the EE and DP simultaneously in tablet pharmaceutical formulation without any separation step. The suggested methods were compared with a reference method (HPLC) using analysis of variance (ANOVA) at a 95% confidence level, and no significant difference was observed in terms of accuracy. The suggested chemometric methods are reliable, rapid, and inexpensive, and can be used as an environmentally friendly alternative to HPLC for the simultaneous estimation of the mentioned drugs in commercial pharmaceutical products.

Development and validation of colorimetric-assisted chemometrics methods based on the localized gold nanoparticles surface plasmon resonance for fast simultaneous estimation of anti-hepatitis C virus drugs in their combined dosage form: A comparative study with HPLC method.

The present work describes a developed analytical method based on a colorimetric assay using gold nanoparticles (AuNPs) along with chemometric techniques for the simultaneous estimation of sofosbuvir (SOF) and ledipasvir (LED) in their synthetic mixtures and tablet dosage form. The applied chemometric approaches were continuous wavelet transform (CWT) and least squares support vector machine (LS-SVM). Characterization of AuNPs and AuNPs in combination with the drug was performed by UV-vis spectrophotometer, transmission electron microscopy (TEM), dynamic light scattering (DLS), and Fourier transform infrared (FTIR) spectroscopy. In the CWT method, the zero amplitudes were determined at 427 nm with Daubechies wavelet family for SOF (zero crossing point of LED) and 440 nm with Symlet wavelet family for LED (zero crossing point of SOF) over the concentration range of 7.5-90.0 µg/L and 40.0-100.0 µg/L with coefficients of determination (R2) of 0.9974 and 0.9907 for SOF and LED, respectively. The limit of detection (LOD) and limit of quantification (LOQ) of this method were found to be 7.92, 9.96 µg/L and 12.02, 30.2 µg/L for SOF and LED, respectively. In the LS-SVM model, the mean percentage recovery of SOF and LED in synthetic mixtures was 98.29 % and 99.25 % with root mean square error of 2.392 and 1.034, which were obtained by the optimization of regularization parameter (γ) and width of the function (σ) based on the cross-validation method. The proposed methods were also applied for the determination concentration of SOF and LED in the combined dosage form, recoveries were higher than 95 %, and relative standard deviation (RSD) values were lower than 0.4 %. The achieved results were statistically compared with those obtained from the high-performance liquid chromatography (HPLC) technique for the concurrent estimation of components through one-way analysis of variance (ANOVA), and no significant difference was found between the suggested approaches and the reference one. According to these results, simplicity, high speed, lack of time-consuming process, and cost savings are considerable benefits of colorimetry along with chemometrics methods compared to other ways.

Thin Copper Plate Defect Detection Based on Lamb Wave Generated by Pulsed Laser in Combination with Laser Heterodyne Interference Technique.

Thin copper plate is widely used in architecture, transportation, heavy equipment, and integrated circuit substrates due to its unique properties. However, it is challenging to identify surface defects in copper strips arising from various manufacturing stages without direct contact. A laser ultrasonic inspection system was developed based on the Lamb wave (LW) produced by a laser pulse. An all-fiber laser heterodyne interferometer is applied for measuring the ultrasonic signal in combination with an automatic scanning system, which makes the system flexible and compact. A 3-D model simulation of an H62 brass specimen was carried out to determine the LW spatial-temporal wavefield by using the COMSOL Multiphysics software. The characteristics of the ultrasonic wavefield were extracted through continuous wavelet transform analysis. This demonstrates that the A0 mode could be used in defect detection due to its slow speed and vibrational direction. Furthermore, an ultrasonic wave at the center frequency of 370 kHz with maximum energy is suitable for defect detection. In the experiment, the size and location of the defect are determined by the time difference of the transmitted wave and reflected wave, respectively. The relative error of the defect position is 0.14% by averaging six different receiving spots. The width of the defect is linear to the time difference of the transmitted wave. The goodness of fit can reach 0.989, and it is in good agreement with the simulated one. The experimental error is less than 0.395 mm for a 5 mm width of defect. Therefore, this validates that the technique can be potentially utilized in the remote defect detection of thin copper plates.

A novel method for quantitative determination of multiple substances using Raman spectroscopy combined with CWT.

The identification of mixed solutions is a challenging and important subject in chemical analysis. In this paper, we propose a novel workflow that enables rapid qualitative and quantitative detection of mixed solutions. We use a methanol-ethanol mixed solution as an example to demonstrate the superiority of this workflow. The workflow includes the following steps: (1) converting Raman spectra into Raman images through CWT; (2) using MobileNetV3 as the backbone network, improved multi-label and multi-channel synchronization enables simultaneous prediction of multiple mixture concentrations; and (3) using transfer learning and multi-stage training strategies for training to achieve accurate quantitative analysis. We compare six traditional machine learning algorithms and two deep learning models to evaluate the performance of our new method. The experimental results show that our model has achieved good prediction results when predicting the concentration of methanol and ethanol, and the coefficient of determination R2 is greater than 0.999. At different concentrations, both MAPE and RSD outperform other models, which demonstrates that our workflow has outstanding analytical capabilities. Importantly, we have solved the problem that current quantitative analysis algorithms for Raman spectroscopy are almost unable to accurately predict the concentration of multiple substances simultaneously. In conclusion, it is foreseeable that this non-destructive, automated, and highly accurate workflow can further advance Raman spectroscopy.

Beyond life: Exploring hemodynamic patterns in postmortem mice brains.

We utilize Laser Speckle Contrast Imaging (LSCI) for visualizing cerebral blood flow in mice during and post-cardiac arrest. Analyzing LSCI images, we noted temporal blood flow variations across the brain surface for hours postmortem. Fast Fourier Transform (FFT) analysis depicted blood flow and microcirculation decay post-death. Continuous Wavelet Transform (CWT) identified potential cerebral hemodynamic synchronization patterns. Additionally, non-negative matrix factorization (NMF) with four components segmented LSCI images, revealing structural subcomponent alterations over time. This integrated approach of LSCI, FFT, CWT, and NMF offers a comprehensive tool for studying cerebral blood flow dynamics, metaphorically capturing the 'end of the tunnel' experience. Results showed primary postmortem hemodynamic activity in the olfactory bulbs, followed by blood microflow relocations between somatosensory and visual cortical regions via the superior sagittal sinus. This method opens new avenues for exploring these phenomena, potentially linking neuroscientific insights with mysteries surrounding consciousness and perception at life's end.

A comparison of wavelet-based action potential detection from the NeuroAmp and the Iowa Bioengineering Nerve Traffic Analysis system.

Microneurographic recordings of muscle sympathetic nerve activity (MSNA) reflect postganglionic sympathetic axonal activity directed toward the skeletal muscle vasculature. Recordings are typically evaluated for spontaneous bursts of MSNA; however, the filtering and integration of raw neurograms to obtain multiunit bursts conceals the underlying c-fiber discharge behavior. The continuous wavelet transform with matched mother wavelet has permitted the assessment of action potential discharge patterns, but this approach uses a mother wavelet optimized for an amplifier that is no longer commercially available (University of Iowa Bioengineering Nerve Traffic Analysis System; Iowa NTA). The aim of this project was to determine the morphology and action potential detection performance of mother wavelets created from the commercially available NeuroAmp (ADinstruments), from distinct laboratories, compared with a mother wavelet generated from the Iowa NTA. Four optimized mother wavelets were generated in a two-phase iterative process from independent datasets, collected by separate laboratories (one Iowa NTA, three NeuroAmp). Action potential extraction performance of each mother wavelet was compared for each of the NeuroAmp-based datasets. The total number of detected action potentials was not significantly different across wavelets. However, the predictive value of action potential detection was reduced when the Iowa NTA wavelet was used to detect action potentials in NeuroAmp data, but not different across NeuroAmp wavelets. To standardize approaches, we recommend a NeuroAmp-optimized mother wavelet be used for the evaluation of sympathetic action potential discharge behavior when microneurographic data are collected with this system.NEW & NOTEWORTHY The morphology of custom mother wavelets produced across laboratories using the NeuroAmp was highly similar, but distinct from the University of Iowa Bioengineering Nerve Traffic Analysis System. Although the number of action potentials detected was similar between collection systems and mother wavelets, the predictive value differed. Our data suggest action potential analysis using the continuous wavelet transform requires a mother wavelet optimized for the collection system.

A new approach for heart disease detection using Motif transform-based CWT's time-frequency images with DenseNet deep transfer learning methods.

OBJECTIVES: Electrocardiogram (ECG) signals are extensively utilized in the identification and assessment of diverse cardiac conditions, including congestive heart failure (CHF) and cardiac arrhythmias (ARR), which present potential hazards to human health. With the aim of facilitating disease diagnosis and assessment, advanced computer-aided systems are being developed to analyze ECG signals. METHODS: This study proposes a state-of-the-art ECG data pattern recognition algorithm based on Continuous Wavelet Transform (CWT) as a novel signal preprocessing model. The Motif Transformation (MT) method was devised to diminish the drawbacks and limitations inherent in the CWT, such as the issue of boundary effects, limited localization in time and frequency, and overfitting conditions. This transformation technique facilitates the formation of diverse patterns (motifs) within the signals. The patterns (motifs) are constructed by comparing the amplitudes of each individual sample value in the ECG signals in terms of their largeness and smallness. In the subsequent stage, the obtained one-dimensional signals from the MT transformation were subjected to CWT to obtain scalogram images. In the last stage, the obtained scalogram images were subjected to classification using DenseNET deep transfer learning techniques. RESULTS AND CONCLUSIONS: The combined approach of MT + CWT + DenseNET yielded an impressive success rate of 99.31 %.

Unmanned Surface Vehicle Thruster Fault Diagnosis via Vibration Signal Wavelet Transform and Vision Transformer under Varying Rotational Speed Conditions.

Among unmanned surface vehicle (USV) components, underwater thrusters are pivotal in their mission execution integrity. Yet, these thrusters directly interact with marine environments, making them perpetually susceptible to malfunctions. To diagnose thruster faults, a non-invasive and cost-effective vibration-based methodology that does not require altering existing systems is employed. However, the vibration data collected within the hull is influenced by propeller-fluid interactions, hull damping, and structural resonant frequencies, resulting in noise and unpredictability. Furthermore, to differentiate faults not only at fixed rotational speeds but also over the entire range of a thruster's rotational speeds, traditional frequency analysis based on the Fourier transform cannot be utilized. Hence, Continuous Wavelet Transform (CWT), known for attributions encapsulating physical characteristics in both time-frequency domain nuances, was applied to address these complications and transform vibration data into a scalogram. CWT results are diagnosed using a Vision Transformer (ViT) classifier known for its global context awareness in image processing. The effectiveness of this diagnosis approach was verified through experiments using a USV designed for field experiments. Seven cases with different fault types and severity were diagnosed and yielded average accuracy of 0.9855 and 0.9908 at different vibration points, respectively.