Cu Based Dilute Alloys for Tuning the C2+ Selectivity of Electrochemical CO2 Reduction.

Electrochemical CO2 reduction is a promising technology for replacing fossil fuel feedstocks in the chemical industry but further improvements in catalyst selectivity need to be made. So far, only copper-based catalysts have shown efficient conversion of CO2 into the desired multi-carbon (C2+) products. This work explores Cu-based dilute alloys to systematically tune the energy landscape of CO2 electrolysis toward C2+ products. Selection of the dilute alloy components is guided by grand canonical density functional theory simulations using the calculated binding energies of the reaction intermediates CO*, CHO*, and OCCO* dimer as descriptors for the selectivity toward C2+ products. A physical vapor deposition catalyst testing platform is employed to isolate the effect of alloy composition on the C2+/C1 product branching ratio without interference from catalyst morphology or catalyst integration. Six dilute alloy catalysts are prepared and tested with respect to their C2+/C1 product ratio using different electrolyzer environments including selected tests in a 100-cm2 electrolyzer. Consistent with theory, CuAl, CuB, CuGa and especially CuSc show increased selectivity toward C2+ products by making CO dimerization energetically more favorable on the dominant Cu facets, demonstrating the power of using the dilute alloy approach to tune the selectivity of CO2 electrolysis.

Compressive strain in Cu catalysts: Enhancing generation of C2+ products in electrochemical CO2 reduction.

Elastic strain in Cu catalysts enhances their selectivity for the electrochemical CO2 reduction reaction (eCO2RR), particularly toward the formation of multicarbon (C2+) products. However, the reasons for this selectivity and the effect of catalyst precursors have not yet been clarified. Hence, we employed a redox strategy to induce strain on the surface of Cu nanocrystals. Oxidative transformation was employed to convert Cu nanocrystals to CuxO nanocrystals; these were subsequently electrochemically reduced to form Cu catalysts, while maintaining their compressive strain. Using a flow cell configuration, a current density of 1 A/cm2 and Faradaic efficiency exceeding 80% were realized for the C2+ products. The selectivity ratio of C2+/C1 was also remarkable at 9.9, surpassing that observed for the Cu catalyst under tensile strain by approximately 7.6 times. In-situ Raman and infrared spectroscopy revealed a decrease in the coverage of K+ ion-hydrated water (K·H2O) on the compressively strained Cu catalysts, consistent with molecular dynamics simulations and density functional theory calculations. Finite element method simulations confirmed that reducing the coverage of coordinated K·H2O water increased the probability of intermediate reactants interacting with the surface, thereby promoting efficient C-C coupling and enhancing the yield of C2+ products. These findings provide valuable insights into targeted design strategies for Cu catalysts used in the eCO2RR.

Preparation of Copper-Based Catalysts for Obtaining Methanol by the Chemical Impregnation Method.

This paper presents the preparation of heterogeneous catalysts for the direct hydrogenation process of CO2 to methanol. The development of the modern chemical industry is inextricably linked to the use of catalytic processes. As a result, currently over 80% of new technologies introduced in the chemical industry incorporate catalytic processes. Since the basic factor of catalytic processes is the catalysts, the studies for the deepening of the knowledge regarding the nature of the action of the catalysts, for the development of new catalysts and catalytic systems, as well as for their improvement, represent a research priority of a fundamental or applied nature. The Cu/ZnO/Al2O3 catalyst for the synthesis of green methanol, using precursors of an inorganic (copper nitrate, denoted by Cu/ZnO/Al2O3-1) and organic (copper acetate, denoted by Cu/ZnO/Al2O3-2) nature, are obtained by chemical impregnation that includes two stages: preparation and one of calcination. The preparation methods and conditions, as well as the physico-chemical properties of the catalyst precursor, play a major role in the behavior of the catalysts. The prepared catalysts were characterized using atomic adsorption analysis, scanning electron microscopy (SEM) with energy dispersive X-ray (EDX) analysis, specific surface area and pore size analyses, adsorption, and the chemisorption of vapor (BET).

Copper-catalyzed multicomponent reaction of ß-trifluoromethyl ß-diazo esters enabling the synthesis of ß-trifluoromethyl N,N-diacyl-ß-amino esters.

An efficient multicomponent reaction of newly designed ß-trifluoromethyl ß-diazo esters, acetonitrile, and carboxylic acids via an interrupted esterification process under copper-catalyzed conditions has been developed, which affords various unsymmetrical ß-trifluoromethyl N,N-diacyl-ß-amino esters in good to excellent yields. The reaction features mild conditions, a wide scope of ß-amino esters and carboxylic acids, and also applicability to large-scale synthesis, thus providing an efficient way for the synthesis of ß-trifluoromethyl ß-diacylamino esters. Furthermore, this reaction represents the first example of a Mumm rearrangement of ß-trifluoromethyl ß-diazo esters.

Achievements and challenges of copper-based single-atom catalysts for the reduction of carbon dioxide to C2+ products.

Copper is the only metal that can convert CO2 into C2 and C2+ in electrocatalytic carbon dioxide reduction (CO2RR). However, the Faraday efficiency of CO2 conversion to C2 and C2+ products at high current densities is still low, which cannot meet the actual industrial demand. Here, the design methods of single-atom copper catalysts (including regulating the coordination environment of single-atom copper, modifying the carbon base surface and constructing diatomic Cu catalysts) are reviewed, and the current limitations and future research directions of copper-based single-atom catalysts are proposed, providing directions for the industrial conversion of CO2 into C2 and C2+ products.

Efficient synthesis of 3-alkyl-2-(-1H-1,2,3-triazolyl)methyl)thio)-2,3-dihydroquinazolin-4(1H)-one derivative via multistep synthesis approach by novel Cu@Py-Oxa@SPION catalyst.

In this pared, an efficient method is introduced for the synthesis of 3-alkyl-2-(((4-(2-oxopropyl)-1H-1,2,3-triazol-1-yl)alkyl)thio)-2,3-dihydroquinazolin-4(1H)-one derivatives. These novel products have both 1,2,3-triazole and quinazolinone in their structures. For the synthesis of these products, a novel catalyst is designed, synthesized, and characterized by the immobilization of copper onto modified magnetic iron oxide. The catalyst (denoted: Cu@Py-Oxa@SPION) was characterized by several characterization techniques. In this regard, 16 3-alkyl-2-(((4-(2-oxopropyl)-1H-1,2,3-triazol-1-yl)alkyl)thio)-2,3-dihydroquinazolin-4(1H)-one derivatives were synthesized in high isolated yields (77-86%). As an advantage, the catalyst is highly recoverable and its activity has not decreased after 7 sequential runs. The method is very efficient for the synthesis of the products in high isolated yields under mild reaction conditions in a green solvent. The scope of the method is broad and several examples were successfully synthesized using starting materials with different functional groups.

Copper-catalyzed reaction of aziridine for the synthesis of substituted imidazolidine and imidazolidinone.

Herein we report a copper-catalyzed synthesis of imidazolidine by employing the reaction of aziridine with imine. The reaction smoothly provided a diverse range of 2-substituted imidazolidines with high compatibility with various functional groups. Moreover, during our investigation, we discovered that isocyanate also reacted with aziridine to yield substituted imidazolidinones efficiently. The versatility of these reactions was further demonstrated by their application in the synthesis of hybrid molecules derived from two pharmaceutical compounds. This approach opens new possibilities for the discovery of novel classes of bioactive molecules.

Favoring CO Intermediate Stabilization and Protonation by Crown Ether for CO2 Electromethanation in Acidic Media.

The large-scale deployment of CO2 electroreduction is hampered by deficient carbon utilization in neutral and alkaline electrolytes due to CO2 loss into (bi)carbonates. Switching to acidic media mitigates carbonation, but suffers from low product selectivity because of hydrogen evolution. Here we report a crown ether decoration strategy on a Cu catalyst to enhance carbon utilization and selectivity of CO2 methanation under acidic conditions. Macrocyclic 18-Crown-6 is found to enrich potassium cations near the Cu electrode surface, simultaneously enhancing the interfacial electric field to stabilize the *CO intermediate and accelerate water dissociation to boost *CO protonation. Remarkably, the mixture of 18-Crown-6 and Cu nanoparticles affords a CH4 Faradaic efficiency of 51.2 % and a single pass carbon efficiency of 43.0 % toward CO2 electroreduction in electrolyte with pH=2. This study provides a facile strategy to promote CH4 selectivity and carbon utilization by modifying Cu catalysts with supramolecules.

Copper-Catalyzed Intramolecular Olefinic C(sp2)-H Amidation for the Synthesis of γ-Alkylidene-γ-lactams.

Herein, we report the copper-catalyzed dehydrogenative C(sp2)-N bond formation of 4-pentenamides via nitrogen-centered radicals. This reaction provides a straightforward and efficient preparation method for γ-alkylidene-γ-lactams. Notably, we could controllably synthesize α,ß-unsaturated- or α,ß-saturated-γ-alkylidene-γ-lactams depending on the reaction conditions.

Sodium Trifluoroacetate mediated Copper-Catalyzed aza-Michael addition of α,ß-unsaturated olefins with aromatic amines.

We present a sodium trifluoroacetate (CF3CO2Na) mediated copper-catalyzed aza-Michael addition of aromatic amines with activated olefins under mild, aqueous reaction conditions. This simplistic protocol employs a copper catalyst (10 mol%) and water as solvent. This transformation occurs precisely with aromatic substituted amines containing both electron-donating (EDG) and electron-withdrawing (EWG) groups. A broad range of substrates were tested under the optimized conditions, which are producing good to moderate yields.

Two-Step Thermal Transformation of Multilayer Graphene Using Polymeric Carbon Source Assisted by Physical Vapor Deposited Copper.

Direct in situ growth of graphene on dielectric substrates is a reliable method for overcoming the challenges of complex physical transfer operations, graphene performance degradation, and compatibility with graphene-based semiconductor devices. A transfer-free graphene synthesis based on a controllable and low-cost polymeric carbon source is a promising approach for achieving this process. In this paper, we report a two-step thermal transformation method for the copper-assisted synthesis of transfer-free multilayer graphene. Firstly, we obtained high-quality polymethyl methacrylate (PMMA) film on a 300 nm SiO2/Si substrate using a well-established spin-coating process. The complete thermal decomposition loss of PMMA film was effectively avoided by introducing a copper clad layer. After the first thermal transformation process, flat, clean, and high-quality amorphous carbon films were obtained. Next, the in situ obtained amorphous carbon layer underwent a second copper sputtering and thermal transformation process, which resulted in the formation of a final, large-sized, and highly uniform transfer-free multilayer graphene film on the surface of the dielectric substrate. Multi-scale characterization results show that the specimens underwent different microstructural evolution processes based on different mechanisms during the two thermal transformations. The two-step thermal transformation method is compatible with the current semiconductor process and introduces a low-cost and structurally controllable polymeric carbon source into the production of transfer-free graphene. The catalytic protection of the copper layer provides a new direction for accelerating the application of graphene in the field of direct integration of semiconductor devices.

Promoting CO2 Electroreduction to Multi-Carbon Products by Hydrophobicity-Induced Electro-Kinetic Retardation.

Advancing the performance of the Cu-catalyzed electrochemical CO2 reduction reaction (CO2 RR) is crucial for its practical applications. Still, the wettable pristine Cu surface often suffers from low exposure to CO2 , reducing the Faradaic efficiencies (FEs) and current densities for multi-carbon (C2+ ) products. Recent studies have proposed that increasing surface availability for CO2 by cation-exchange ionomers can enhance the C2+ product formation rates. However, due to the rapid formation and consumption of *CO, such promotion in reaction kinetics can shorten the residence of *CO whose adsorption determines C2+ selectivity, and thus the resulting C2+ FEs remain low. Herein, we discover that the electro-kinetic retardation caused by the strong hydrophobicity of quaternary ammonium group-functionalized polynorbornene ionomers can greatly prolong the *CO residence on Cu. This unconventional electro-kinetic effect is demonstrated by the increased Tafel slopes and the decreased sensitivity of *CO coverage change to potentials. As a result, the strongly hydrophobic Cu electrodes exhibit C2+ Faradaic efficiencies of ≈90 % at a partial current density of 223 mA cm-2 , more than twice of bare or hydrophilic Cu surfaces.

Highly Selective and Stable Cu Catalysts Based on Ni-Al Catalytic Systems for Bioethanol Upgrading to n-Butanol.

The catalytic upgrading of ethanol into butanol through the Guerbet coupling reaction has received increasing attention recently due to the sufficient supply of bioethanol and the versatile applications of butanol. In this work, four different supported Cu catalysts, i.e., Cu/Al2O3, Cu/NiO, Cu/Ni3AlOx, and Cu/Ni1AlOx (Ni2+/Al3+ molar ratios of 3 and 1), were applied to investigate the catalytic performances for ethanol conversion. From the results, Ni-containing catalysts exhibit better reactivity; Al-containing catalysts exhibit better stability; but in terms of ethanol conversion, butanol selectivity, and catalyst stability, a corporative effect between Ni-Al catalytic systems can be clearly observed. Combined characterizations such as XRD, TEM, XPS, H2-TPR, and CO2/NH3-TPD were applied to analyze the properties of different catalysts. Based on the results, Cu species provide the active sites for ethanol dehydrogenation/hydrogenation, and the support derived from Ni-Al-LDH supplies appropriate acid-base sites for the aldol condensation, contributing to the high butanol selectivity. In addition, catalysts with strong reducibility (i.e., Cu/NiO) may be easily deconstructed during catalysis, leading to fast deactivation of the catalysts in the Guerbet coupling process.

Copper-Catalyzed Heterocyclic Recombination of Aziridine and Diazetidine for the Synthesis of Imidazolidine.

The discovery of new catalytic applications for metals remains an important goal in organic synthesis. If a catalyst has multiple functions, such as inducing bond cleavage and formation, it can streamline multi-step transformations. Herein, the Cu-catalyzed synthesis of imidazolidine through heterocyclic recombination between aziridine and diazetidine is reported. Mechanistically, Cu catalyzes the conversion of diazetidine into the corresponding imine, which then reacts with aziridine to form imidazolidine. The scope is sufficiently wide to form various imidazolidines, as many functional groups are compatible with the reaction conditions.

Copper(I)-Catalyzed Conjugate Addition/Enantioselective Protonation with Selenols and α-Substituted α,ß-Unsaturated Thioamides.

Herein, a copper(I)-catalyzed asymmetric conjugate addition/protonation with selenols and α-substituted α,ß-unsaturated thioamides is disclosed, which affords a series of chiral selenides in high to excellent enantioselectivity. As for both selenols and α-substituted α,ß-unsaturated thioamides, the reaction enjoys broad substrate scopes. The present catalytic system is also successfully applied to asymmetric selenation of ß-substituted α,ß-unsaturated thioamides. A [Cu-(R,RP )-TANIAPHOS]-SePh species is characterized by its 77 Se NMR spectra, which gives a chemical shift at δ 462 ppm. Moreover, a {[Cu-(R)-TOL-BINAP]-SePh}2 species is characterized by X-ray analysis, which confirms the formation of Cu-Se bond in the reaction. Finally, the transformations of the thioamide group to amine and thioester are demonstrated to be straightforward.

Copper-Catalyzed Aerobic C(sp3)-H Oxidation of ß-(Alkoxy)imino Carbonyl Compounds.

Direct oxidation of the C(sp3)-H bond of ß-(alkoxy)imino carbonyl compounds using copper acetate and molecular oxygen has been established. The protocol features a broad substrate scope and generates 1-imino-2,3-dicarbonyls in good to excellent yields.

Cu-Catalyzed Polychloromethylamination of Styrenes through C(sp3 )-H Bond Cleavage.

A copper-catalyzed three-component coupling reaction has been developed allowing the rapid building of valuable complex highly functionalized ß-polychloromethyl amines from simple styrenes, arylamines, and dichloromethane/chloroform. Using aryldiazonium salts as a radical initiator, a series of corresponding products are obtained with moderate to good yields under a carbon dioxide or nitrogen atmosphere (50 psi). In addition, good functional group tolerance can be observed.

Unraveling and tuning the linear correlation between CH4 and C2 production rates in CO2 electroreduction.

Although many catalysts have been reported for the CO2 electroreduction to C1 or C2 chemicals, the insufficient understanding of fundamental correlations among different products still hinders the development of universal catalyst design strategies. Herein, we first discover that the surface *CO coverage is stable over a wide potential range and reveal a linear correlation between the partial current densities of CH4 and C2 products in this potential range, also supported by the theoretical kinetic analysis. Based on the mechanism that *CHO is the common intermediate in the formation of both CH4 (*CHO â†’ CH4) and C2 (*CHO + *CO â†’ C2), we then unravel that this linear correlation is universal and the slope can be varied by tuning the surface *H or *CO coverage to promote the selectivity of CH4 or C2 products, respectively. As proofs-of-concept, using carbon-coated Cu particles, the surface *H coverage can be increased to enhance CH4 production, presenting a high CO2-to-CH4 Faradaic efficiency ( [Formula: see text] ∼52%) and an outstanding CH4 partial current density of -337 mA cm-2. On the other hand, using an Ag-doped Cu catalyst, the CO2RR selectivity is switched to the C2 pathway, with a substantially promoted [Formula: see text] of 79% and a high partial current density of -421 mA cm-2. Our discovery of tuning intermediate coverages suggests a powerful catalyst design strategy for different CO2 electroreduction pathways.

High Catalytic Efficiency of a Nanosized Copper-Based Catalyst for Automotives: A Physicochemical Characterization.

The global trend in restrictions on pollutant emissions requires the use of catalytic converters in the automotive industry. Noble metals belonging to the platinum group metals (PGMs, platinum, palladium, and rhodium) are currently used for autocatalysts. However, recent efforts focus on the development of new catalytic converters that combine high activity and reduced cost, attracting the interest of the automotive industry. Among them, the partial substitution of PGMs by abundant non-PGMs (transition metals such as copper) seems to be a promising alternative. The PROMETHEUS catalyst (PROM100) is a polymetallic nanosized copper-based catalyst for automotives prepared by a wet impregnation method, using as a carrier an inorganic mixed oxide (CeO2-ZrO2) exhibiting elevated oxygen storage capacity. On the other hand, catalyst deactivation or ageing is defined as the process in which the structure and state of the catalyst change, leading to the loss of the catalyst's active sites with a subsequent decrease in the catalyst's performance, significantly affecting the emissions of the catalyst. The main scope of this research is to investigate in detail the effect of ageing on this low-cost, effective catalyst. To that end, a detailed characterization has been performed with a train of methods, such as SEM, Raman, XRD, XRF, BET and XPS, to both ceria-zirconia mixed inorganic oxide support (CZ-fresh and -aged) and to the copper-based catalyst (PROM100-fresh and -aged), revealing the impact of ageing on catalytic efficiency. It was found that ageing affects the Ce-Zr mixed oxide structure by initiating the formation of distinct ZrO2 and CeO2 structures monitored by Raman and XRD. In addition, it crucially affects the morphology of the sample by reducing the surface area by a factor of nearly two orders of magnitude and increasing particle size as indicated by BET and SEM due to sintering. Finally, the Pd concentration was found to be considerably reduced from the material's surface as suggested by XPS data. The above-mentioned alterations observed after ageing increased the light-off temperatures by more than 175 °C, compared to the fresh sample, without affecting the overall efficiency of the catalyst for CO and CH4 oxidation reactions. Metal particle and CeZr carrier sintering, washcoat loss as well as partial metal encapsulation by Cu and/or CeZrO4 are identified as the main causes for the deactivation after hydrothermal ageing.

Electrochemical Generation of Nitric Oxide for Medical Applications.

Over the past 30 years, the significance of nitric oxide (NO) has become increasingly apparent in mammalian physiology. It is biosynthesized by three isoforms of nitric oxide synthases (NOS): neuronal (nNOS), endothelial (eNOS), and inducible (iNOS). Neuronal and eNOS both produce low levels of NO (nM) as a signaling agent and vasodilator, respectively. Inducible (iNOS) is present in activated macrophages at sites of infection to generate acutely toxic (µM) levels of NO as part of the mammalian immune defense mechanism. These discoveries have led to numerous animal and clinical studies to evaluate the potential therapeutic utility of NO in various medical operations/treatments, primarily using NO gas (via gas-cylinders) as the NO source. In this review, we focus specifically on recent advances in the electrochemical generation of NO (E-NOgen) as an alternative means to generate NO from cheap and inert sources, and the fabrication and testing of biomedical devices that utilize E-NOgen to controllably generate NO for medical applications.