Does the anatomy around the pterygomaxillary suture contribute to the risk of bad fractures in Le Fort I osteotomy?

Le Fort I (LF1) osteotomy, a common orthognathic procedure for the maxilla aimed at achieving maxillary mobility by separating the pterygomaxillary suture, poses a risk of bad fracture that may lead to complications and inadequate mobility. Our study analyzed two- and three-dimensional computed tomography images to identify the anatomical factors associated with bad fractures due to an LF1 osteotomy. Point 'a' is where the lateral pterygomaxillary suture on the axial image aligns with the zygomatic alveolar line near the line used for an LF1 osteotomy, with the base line connecting the bilateral 'a' points.Two risk factors were identified on the pterygoid side: (i) when the distance from point 'a' to the intersection of the base line and the medial pterygoid plate was <6.0 mm; and (ii) when the distance from the piriform aperture margin to the base line was <44.78 mm. Six risk factors were identified on the maxillary side, including the distance between the most anterior and most lateral points of the internal surface of the maxillary sinus being <31.9 mm. Our analyses revealed that fractures that occur during pterygomaxillary suture separation in an LF1 osteotomy are influenced by anatomical factors of the maxilla and pterygoid process, which form the pterygomaxillary suture.

Surgically assisted rapid maxillary expansion: current concepts of minimally invasive approaches.

Studies have consistently shown an association of the Le Fort I osteotomy with undesirable adverse events in the nasolabial region, including lengthening and thinning of the upper lip, a reduction in upper vermilion exposure, and nasal base enlargement. Various minimally invasive techniques have been developed based on knowledge collected over recent decades on the aetiopathogenesis of these aesthetic impairments. The common scope of these techniques is to reduce the damage to the facial soft tissues and achieve a sound and spontaneous healing process, avoiding those procedures that are commonly used to counteract undesirable aesthetic changes. This paper provides a summary of the aetiopathogenesis of these adverse events, as well as an overview of current concepts in minimally invasive surgically assisted rapid maxillary expansion (miSARME).

Orthognathic surgery improves quality of life: a survey clinical study.

BACKGROUND: The aim of this study was to evaluate the quality of life (QoL) of patients with dentofacial deformity (n = 107) compared with that of healthy individuals (n = 108) from 2019 to 2020. METHODS: Oral Health Impact Profile 14 (OHIP-14) and the Orthognathic Quality of Life Questionnaire (OQLQ) were administered to the individuals before surgery (T1) and 6 months after surgery (T2). RESULTS: Preoperative scores (T1) were greater in the surgical group than in the control group in all domains of both surveys (p ≤ 0.001). Postoperative scores (T2) in the surgery group decreased significantly after surgery in all domains in both surveys (p < 0.001). The OHIP-14 scores in the control group at T2 were significantly greater than those in the other domains except for functional limitation at T1. The type of surgery had no effect on quality of life. Class III patients had higher preoperative scores in certain domains. Postoperative physical disability (p = 0.037), physical pain (p = 0.047), and preoperative social disability (p = 0.030) scores of OHIP-14 awareness of dentofacial aesthetics of OQLQ (p = 0.019) were found to be higher in females than in males. CONCLUSIONS: The results showed that orthognathic surgery positively affected quality of life. The control group showed differences in T1 and T2 scores, which can be attributed to their psychological status.

Hanna's Modified Sagittal Split Osteotomy (HSSO): An Alternative to Inverted L Osteotomy-Merging Function and Aesthetics for Enhanced Stability, Attractiveness, and Nerve Protection.

Background: The current high standards in orthognathic surgery demand surgical solutions that are both ⁠ functionally ⁠ effective and aesthetically pleasing. Our approach offers one for enhanced stability, attractiveness, and nerve protection ⁠ with improved accessibility ⁠ in the majority of orthognathic scenarios ⁠ compared to an inverted L osteotomy. Methods: A case series is presented to illustrate the application and outcomes of HSSO, an optimised approach that combines the advantages of a transoral inverted L osteotomy with specific enhancements and increased versatility, ⁠ with accessibility and exposure similar to a BSSO. Results: HSSO as a completely transoral technique, demonstrate the ability to perform significant counterclockwise rotations of the mandible, eliminating the need for trocars or skin incisions. We experinced high postoperative stability when HSSO was performed in conjunction with a three-piece LeFort 1 osteotomy on a dynamic opposing arch. In comparison to an inverted L approach, we postulated that HSSO offers advantages in stability, due to the increased segmental overlap of the proximal and distal segments of the mandible. This approach is designed to enhance the safety of the inferior alveolar nerve compared to traditional sagittal split methods. Furthermore, HSSO represents an alternative to total joint replacement in select cases of idiopathic condylar resorption and is effective for correcting mandibular asymmetries while maintaining jawline aesthetics. This is achieved through the manipulation of the mandibular angle, ramus height, and inferior border without creating a step deformity in the soft tissue. Conclusions: The outcomes of HSSO highlight its capacity to deliver predictable, functional, and aesthetically pleasing results, offering a viable alternative to more traditional orthognathic techniques.

Long-term follow-up of corrective jaw surgery including distraction osteogenesis in 32 patients with juvenile idiopathic arthritis.

Dentofacial deformity following juvenile idiopathic arthritis (JIA) with temporomandibular joint (TMJ) involvement is associated with functional, aesthetic, and psychosocial impairment. Corrective surgical treatment includes combinations of orthognathic surgeries (OS). The aims of this study were to assess orofacial symptoms, functional and aesthetic status, and stability after OS including mandibular distraction osteogenesis (MDO). A prospective study was conducted of 32 patients with JIA of the TMJ and dentofacial deformities who underwent MDO as the only surgery or in combination with bilateral sagittal split osteotomy, Le Fort I, and/or genioplastybetween 2003 and 2018. Data from clinical examinations and cephalograms performed pre- and postoperative and at long-term (mean 4 years) were analysed. Patients experienced unchanged orofacial symptoms (all P > 0.05), short-term TMJ functional impairment (all P < 0.001), and long-term morphological improvements in SNB angle (P < 0.001), anterior facial height (P < 0.001), mandibular length (P = 0.049), overjet (P < 0.001 and P = 0.005), and posterior facial symmetry (P = 0.046). MDO as the only surgery or with secondary adjunctive OS improved dentofacial morphology in terms of mandibular advancement, anterior facial height, posterior facial symmetry, and incisal relationships without long-term deterioration in TMJ function or orofacial symptoms.

Deep Learning-Based Facial and Skeletal Transformations for Surgical Planning.

The increasing application of virtual surgical planning (VSP) in orthognathic surgery implies a critical need for accurate prediction of facial and skeletal shapes. The craniofacial relationship in patients with dentofacial deformities is still not understood, and transformations between facial and skeletal shapes remain a challenging task due to intricate anatomical structures and nonlinear relationships between the facial soft tissue and bones. In this study, a novel bidirectional 3-dimensional (3D) deep learning framework, named P2P-ConvGC, was developed and validated based on a large-scale data set for accurate subject-specific transformations between facial and skeletal shapes. Specifically, the 2-stage point-sampling strategy was used to generate multiple nonoverlapping point subsets to represent high-resolution facial and skeletal shapes. Facial and skeletal point subsets were separately input into the prediction system to predict the corresponding skeletal and facial point subsets via the skeletal prediction subnetwork and facial prediction subnetwork. For quantitative evaluation, the accuracy was calculated with shape errors and landmark errors between the predicted skeleton or face with corresponding ground truths. The shape error was calculated by comparing the predicted point sets with the ground truths, with P2P-ConvGC outperforming existing state-of-the-art algorithms including P2P-Net, P2P-ASNL, and P2P-Conv. The total landmark errors (Euclidean distances of craniomaxillofacial landmarks) of P2P-ConvGC in the upper skull, mandible, and facial soft tissues were 1.964 ± 0.904 mm, 2.398 ± 1.174 mm, and 2.226 ± 0.774 mm, respectively. Furthermore, the clinical feasibility of the bidirectional model was validated using a clinical cohort. The result demonstrated its prediction ability with average surface deviation errors of 0.895 ± 0.175 mm for facial prediction and 0.906 ± 0.082 mm for skeletal prediction. To conclude, our proposed model achieved good performance on the subject-specific prediction of facial and skeletal shapes and showed clinical application potential in postoperative facial prediction and VSP for orthognathic surgery.

Predicting optimal patient-specific postoperative facial landmarks for patients with craniomaxillofacial deformities.

Orthognathic surgery primarily corrects skeletal anomalies and malocclusion to enhance facial aesthetics, aiming for an improved facial appearance. However, this traditional skeletal-driven approach may result in undesirable residual asymmetry. To address this issue, a soft tissue-driven planning methodology has been proposed. This technique estimates bone movements based on the envisioned optimal facial appearance, thereby enhancing surgical accuracy and effectiveness. This study investigates the initial implementation phase of the soft tissue-driven approach, simulating the patient's ideal appearance by realigning distorted facial landmarks to an ideal state. The algorithm employs symmetrization and weighted optimization strategies, aligning projected optimal landmarks with standard cephalometric values for both facial symmetry and form, which are essential in orthognathic surgery for facial aesthetics. It also incorporates regularization to preserve the patient's facial characteristics. Validation through retrospective analysis of preoperative patients and normal subjects demonstrates this method's efficacy in achieving facial symmetry, particularly in the lower face, and promoting a natural, harmonious contour. Adhering to soft tissue-driven principles, this novel approach shows promise in surpassing traditional methods, potentially leading to enhanced facial outcomes and patient satisfaction in orthognathic surgery.

Evaluation of pre- and postoperative nutrition and oral health-related quality of life in orthognathic surgery patients.

OBJECTIVE: Orthognathic surgery is a complex orofacial surgery that can significantly impact occlusal function and effect nutritional and quality of life parameters. This study aimed to evaluate alterations in dietary intake, chewing function, physical activity, and oral health-related quality of life of patients undergoing orthognathic surgery. RESEARCH METHODS AND PROCEDURES: In this prospective longitudinal study, the assessments were conducted at: preoperatively (T0) and postoperative first week (T1), second week (T2), first month (T3), and third month (T4) between May 2021 and March 2023. Sociodemographic questionnaire, 24-h dietary recall record, chewing ability form, International Physical Activity Questionnaire, and Oral Health Impact Profile-14 (OHIP-14) was applied at face-to-face interviews. RESULTS: Seventy eligible orthognathic surgery patients were evaluated, and 37 patients (52.8%) completed this study. Energy and fat intake significantly decreased from T0 to T1 (P < 0.001) and returned to basis by T4 (P = 0.015). Fiber intake was found to be lowest at T1 and T2 compared with other time points (P < 0.001). Chewing ability showed a deterioration and then improvement; however, patients still had difficulties chewing hard foods at T4. The OHIP-14 increased at T2 and T3 from T0 (P < 0.001 and P = 0.021, respectively) and showed a significant improvement at T4 (P < 0.05). CONCLUSION: The findings indicate a temporary decline in nutritional intake and chewing ability with subsequent recovery by the third month postsurgery. These changes, along with the trends in oral health-related quality of life, underscore the need for tailored nutritional and functional rehabilitation programs following orthognathic surgery.

Effects of minimally invasive surgical and miniscrew-assisted rapid palatal expansion (MISMARPE) on the nasal cavity and upper airway: a comparative cohort study.

This study was performed to evaluate the impact on the upper airway and nasal cavity of a new minimally invasive surgical and miniscrew-assisted rapid palatal expansion (MISMARPE) technique for the treatment of adult patients with transverse maxillary deficiency, in comparison to surgically assisted rapid palatal expansion (SARPE). Computed tomography scans of 21 MISMARPE and 16 SARPE patients were obtained preoperatively (T0) and at the end of the activation period (T1) and analysed. Linear and volumetric measurements were performed in the dental, alveolar, nasal cavity, and oropharynx regions. Generalised estimating equations were used to consider the intervention time and surgery type, and their interaction. In both groups, measurements were increased at T1 (P < 0.001), except for oropharynx volume (P > 0.05). A greater expansion in nasal cavity floor and median palatal suture was shown for MISMARPE when compared to SARPE (P < 0.001), with the same degree of expander activation (P = 0.094). A trapezoidal (coronal plane) and 'V' shape (axial plane) expansion pattern, was observed after MISMARPE. Both surgical techniques were effective for maxillary expansion in adults. However, MISMARPE was performed without osteotomy of the pterygomaxillary suture, in an outpatient setting and with local anaesthesia.

Health-related quality of life and satisfaction following orthognathic surgery: a prospective cohort study.

PURPOSE: This study investigates the motivations for orthognathic surgery and assesses the quality of life (QoL) and satisfaction among patients treated at a hospital over 12 months. METHODS: We employed an Arabic version of the Orthognathic Quality of Life Questionnaire (OQLQ), used pre-surgery and at 2 weeks, 3 months, and 6 months post-surgery. This included demographic data, the OQLQ, and visual analogue scales (VAS). The OQLQ, originally by Cunningham et al., was translated and adapted by Al-Asfour et al. Additional validated questions were added to both pre- and post-operative surveys. RESULTS: Of 136 participants (51 males, 85 females, average age 25.1), most underwent surgery for facial aesthetics (85.2%) and bite correction (57.3%). Treatments included various osteotomies. OQLQ scores significantly dropped from 63.3% pre-surgery to 23% at 6 months, showing QoL improvement. 97.8% reported better psychological status post-surgery (p = 0.0001), with 94.1% satisfaction at 6 months (p = 0.0001). CONCLUSION: The orthognathic surgery yielded positive outcomes in functional and psychological aspects, leading to high satisfaction and improved QoL in patients with dentofacial deformity.

Comprehensive analysis of lateral nasal wall anatomy to optimize the osteotomy in different skeletal patterns.

PURPOSE: Variations in nasal wall anatomy are crucial in patients with dentofacial deformities undergoing Le Fort I osteotomy. These structural variations heighten the potential for complications during surgical procedures. Hence, the study focused on evaluating the differences in the lateral nasal wall anatomy across different skeletal Classes. METHODS: This study evaluated 86 patients aged 18-43 years with different skeletal Classes. In the axial images acquired from coronal sections, two angulations and the linear distances of the lateral nasal wall were measured in Class I, II, and III patients. The measurement between the piriform opening and the most anterior point of the greater palatine foramen was evaluated in three parts regarding the osteotomy line. Differences between the skeletal patterns were analyzed using an independent sample t-test and Mann-Whitney U test with a significance level of 0.05. The intra-class correlation coefficient was calculated for inter-observer and intra-observer agreement. RESULTS: There was a statistically significant difference between Class I and Class II subjects regarding the anterior lateral nasal wall (p = 0.011) and anterior nasal thickness (a) (0.004). There was a significant difference between Class I and Class III patients regarding anterior nasal thickness (a) (p < 0.001) and total lateral nasal wall length (p < 0.001). CONCLUSION: For instance, the measurements of Class III and Class II patients were relatively different from those of the Class I patients. Therefore, preoperative Cone-Beam Computed Tomographic analysis should be performed for each patient prior to Le Fort I osteotomy to ensure that the procedure is performed safely.

Biotipo facial y clasificación esquelética maxilomandibular en pacientes angolanos con anomalías dentomaxilofaciales

Fundamento las mediciones cefalométricas son un instrumento útil en la atención ortodóncica, pues junto a otras mediciones cefalométricas completan y guían el plan de tratamiento que el especialista puede trazar en función de la resolución de las anomalías dentomaxilofaciales. Objetivo determinar la comorbilidad entre el biotipo facial y la clasificación esquelética maxilomandibular en pacientes angolanos con anomalías dentomaxilofaciales. Métodos se realizó un estudio descriptivo transversal, en la Clínica Meditex, en Luanda, Angola, en el período agosto/2021-julio/2023. La población de estudio fue de 123 telerradiografías del perfil de pacientes con anomalías dentomaxilofaciales, ingresados en la consulta de Ortodoncia. Para el análisis de la telerradiografía de perfil se realizaron mediciones del cefalograma de Ricketts y de Steiner, y se utilizó el software Facad versión 3403. Se estudió la clasificación esquelética maxilomandibular (clase I, clase II, clase III) y el biotipo facial (dolicofacial, mesofacial, braquifacial). Resultados el 46,34 % de los pacientes presentó una clase II esquelética maxilomandibular. Mediante el índice VERT de Ricketts, el 49,59 % de los casos fue clasificado como dolicofacial, seguido del 42,27 % como braquifacial. El 83,60 % de los pacientes con biotipo dolicofacial se caracterizó por presentar una clase II esquelética maxilomandibular, y el 76,92 % de aquellos con biotipo braquifacial clasificó como clase III. Se encontró una asociación significativa entre el biotipo facial y la clasificación esquelética maxilomandibular (p= 0,000). Conclusiones en la mayoría de los pacientes con anomalías dentomaxilofaciales se evidenció una relación entre el biotipo dolicofacial y la clase II esquelética maxilomandibular, por lo que existe una comorbilidad entre ambas características esqueléticofaciales.

Foundation cephalometric measurements are a useful instrument in orthodontic care, since together with other cephalometric measurements they complete and guide the treatment plan that the specialist can draw up based on the resolution of dentomaxillofacial anomalies. Objective to determine the comorbidity between facial biotype and maxillomandibular skeletal classification in Angolan patients with dentomaxillofacial anomalies. Methods a cross-sectional descriptive study was carried out at the Meditex Clinic, in Luanda, Angola, from August/2021 to July/2023. The studied population was 123 patients' profile teleradiographs with dentomaxillofacial anomalies, admitted to the Orthodontic clinic. For the analysis of the profile teleradiography, measurements of the Ricketts and Steiner cephalogram were made, and the Facad software version 3403 was used. The maxillomandibular skeletal classification (class I, class II, class III) and the facial biotype (dolichofacial, mesofacial, brachyfacial) were studied. Results 46.34% of patients presented maxillomandibular skeletal class II. Using the Ricketts VERT index, 49.59% of cases were classified as dolichofacial, followed by 42.27% as brachyfacial. 83.60% of patients with dolichofacial biotype were characterized by having maxillomandibular skeletal class II, and 76.92% of those with brachyfacial biotype were classified as class III. A significant association was found between facial biotype and maxillomandibular skeletal classification (p= 0.000). Conclusions in the majority of patients with dentomaxillofacial anomalies, a relationship was evident between the dolichofacial biotype and the maxillomandibular skeletal class II, so there is a comorbidity between both skeletal-facial characteristics.

Effects of orthopedic treatment (distraction splint) on dentofacial deformities in patients with juvenile idiopathic arthritis.

BACKGROUND: Juvenile idiopathic arthritis (JIA) frequently affects the temporomandibular joint (TMJ), which can alter mandibular growth and development and result in dentofacial deformities. OBJECTIVE: To assess the outcomes of orthopedic treatment with distraction splint (DS) in patients with JIA-related dentofacial deformity. METHODS: The retrospective study involved 30 patients with JIA and unilateral TMJ involvement, another study group of 20 patients with JIA and bilateral TMJ involvement, and a control group of 18 non-JIA orthodontic patients with Class II and III malocclusions. The inclusion criteria were DS treatment and cone-beam computed tomography (CBCT) scans before (T0) and 2 years after treatment (T1). Dentofacial morphology and deformity were evaluated based on a validated three-dimensional CBCT-based morphometric analysis. Intergroup differences in outcome measures were compared at T0 and T1, and intragroup changes between T0 and T1 were assessed using the Kruskal-Wallis test. RESULTS: Initial evaluations at T0 revealed significant differences between the unilateral and bilateral JIA groups and the control group for three out of eight dentofacial deformity variables: inter-side difference in total posterior mandibular height, mandibular axial angle, and posterior/anterior face height (ratio). At follow-up (T1), significant inter-group differences were only observed in total posterior mandibular height indicating that intergroup differences were less pronounced after splint treatment. Assessing inter-group changes between T0 and T1 showed that all parameters remained constant except posterior/anterior face height ratio, which significantly decreased between T0 and T1. CONCLUSIONS: The findings demonstrate the potential of DS treatment for patients with JIA and unilateral or bilateral TMJ involvement to generally support normal dentofacial growth or at least limit further deterioration of dentofacial deformities.

Feasibility of simultaneous TMJ arthroscopy in ADDwoR patients undergoing orthognathic surgery for jaw deformity.

This study evaluated the feasibility of simultaneous temporomandibular joint (TMJ) arthroscopy and orthognathic surgery as a new treatment strategy for anterior disc displacement without reduction (ADDwoR) patients with severe jaw deformities. Twelve ADDwoR patients with facial deformities who underwent arthroscopy and orthognathic surgery between September 2015 and December 2019 were retrospectively evaluated. Pre- and postoperative maximum incisal opening (MIO) and joint pain were recorded. Computed tomography (CT) and three-dimensional cephalometric analysis were performed at 3 (T1) and ≥6 (T2) months postoperatively. Magnetic resonance imaging (MRI) of the TMJ was performed before, ≤7 days after and ≥6 months after surgery. The lateral profile radiological findings, the symmetry of the maxilla and mandible, and the MRI measurements were compared. Anterior disc displacement did not recur, and the maximum incisal opening (MIO) increased from 27.4 mm to 32.7 mm after surgery (p < 0.05). No significant differences were found in the lateral profile, symmetry indices or condylar height via MRI between T1 and T2. Joint morphology and the position of both the maxilla and mandible remained stable during postoperative follow-up, while joint symptoms were markedly relieved and facial appearance was noticeably improved. Combined arthroscopy and orthognathic surgery is effective and recommended for ADDwoR patients with jaw deformities.

Mandibular autorotation: a critical virtual parameter in clinical decision-making regarding maxilla-first versus mandible-first sequence.

Large degrees of mandibular autorotation during intermediate splint design are prone to transfer error and decrease accuracy. The purpose of this study was to evaluate the amount of mandibular autorotation necessary to design intermediate splints for maxilla- and mandible-first sequences using virtual planning software, to help the clinical decision-making regarding the most adequate sequence for each patient. The influence of specific orthognathic movements (different vertical and sagittal changes at the Le Fort I level, cant correction) and the type of maxillofacial deformity (skeletal Class II, III, anterior open bite) were evaluated to identify those that would require higher levels of autorotation for each sequence. Three-dimensional virtual surgical planning data of 194 patients were reviewed (126 female, 68 male; mean age 26.5 ± 11.0 years; 143 skeletal Class II, 51 skeletal Class III) and subgroup analyses were conducted using the Kruskal-Wallis test and post-hoc pairwise comparisons. As an additional parameter (mandibular autorotation), maxilla-first is indicated for bimaxillary osteotomies with Le Fort I posterior intrusion, anterior open bite, and skeletal Class III, while mandible-first is recommended for Le Fort I global extrusion, especially with maxillary cant correction.

Health-related quality of life, jaw function and sleep-disordered breathing among patients with dentofacial deformity.

BACKGROUND AND OBJECTIVES: Patients with dentofacial deformity (DFD) requiring orthognathic treatment have poor aesthetics, jaw function and psychological well-being, which potentially affect the quality of life. This study aimed to investigate the health-related general, oral and orthognathic quality of life, jaw function and sleep-disordered breathing at different stages of orthognathic surgical treatment. METHODS: A total of 120 consecutive patients with DFD were recruited and grouped as pre-orthodontic treatment (group 1), pre-surgery (group 2), 4 months post-surgery (group 3), 24 months post-surgery (group 4) and in addition 30 controls without DFD (group 0). Outcomes were assessed using general health Short Form Survey (SF-36), Oral Health Impact (OHIP-14), Orthognathic Quality of Life Questionnaire (OQLQ), STOP-Bang and Jaw Function Limitation Scale (JFLS) questionnaires. In addition, presence or absence of pain was recorded. Data were tested with analysis of variance, Kruskal-Wallis test, Tukey post hoc test and structural equation modelling (SEM). RESULTS: Results revealed SF-36 (p = .814) and STOP-Bang (p = .143) total scores did not differ between control and treatment groups. In contrast, OHIP-14, OQLQ and JFLS total scores differed between groups (p = .001). Higher scores were observed in groups 1 (p = .001), 2 (p = .001) and 3 (p = .041) compared to group 0, indicating poor oral health in patients with DFD. Importantly, in group 4, oral health-related quality of life was better, and OHIP-14 (p = .936) and JFLS (p = .572) scores did not differ from controls. OQLQ scores of group 4 were significantly lower than group 1 (p = .001) but higher than group 0 (p = .013). SEM results revealed a significant negative associations of pain with JFLS and OQLQ; OHIP-14 with OQLQ; OHIP-14 with SF-36; and finally STOP-Bang with SF-36. Positive associations were observed between JFLS and OHIP-14; OHIP-14 and OQLQ. CONCLUSION: Oral health-related quality of life and jaw function appears to be improved 24 months after orthognathic surgery. Pain and limitation in jaw function had a negative association with health-related quality of life.

Is there a difference in surgical accuracy following bimaxillary surgery between cleft and non-cleft patients?

OBJECTIVES: To assess the surgical accuracy of 3D virtually planned orthognathic surgery among patients with and without cleft. MATERIALS AND METHODS: This retrospective cohort study included cleft and non-cleft patients with class III malocclusion who underwent bimaxillary surgery. CBCT scans were acquired before and immediately after surgery. 3D virtual surgical planning (VSP) was performed using CBCT and digitalized dentition data. All orthognathic surgeries were performed by the same surgeons using interocclusal splints. The primary outcome variable was surgical accuracy, defined as the difference between the planned and surgically achieved maxillary movements, quantified in six degrees of freedom. Analysis of covariance was used to test for intergroup differences in surgical accuracy after correcting for differences in the magnitude of planned surgical maxillary movements. RESULTS: Twenty-eight cleft and 33 non-cleft patients were enrolled, with mean ages of 18.5 and 25.4 years, respectively (P=0.01). No significant gender difference was present between the groups (P=0.10). After adjustment for small differences in surgical movements, no significant differences in surgical accuracy were observed between cleft and non-cleft patients. CONCLUSION: The present study demonstrates that high surgical accuracy in maxillary movements can be achieved in both cleft and non-cleft patients using VSP and interocclusal splints. CLINICAL RELEVANCE: Orthognathic cases with cleft can be performed with 3D VSP to obtain a satisfactory surgical accuracy.

Effects of SARPE and MISMARPE on correction of transverse maxillary deficiency: A preliminary comparative evaluation.

AIM: The present study was designed to compare, on cone-beam computed tomography imaging, the skeletal and dental effects of the SARPE (Surgically assisted rapid palatal expansion) and MISMARPE (Minimally Invasive Surgical and Miniscrew-Assisted Rapid Palatal Expansion) techniques. MATERIALS AND METHODS: The sample of adult patients with transverse maxillary deficiency (TMD) was divided into two groups, and scans were obtained preoperatively (T0) and immediately after completion of expansion (T1). The posterior and anterior linear transverse distances of the maxilla and the angulation of the maxillary first molars were evaluated. The data were entered into a generalized estimating equations model to verify the postoperative effects of the different techniques. RESULTS: None of the techniques caused any appreciable change in the angulation of the molars. The skeletal changes were similar, with significantly greater gains in the nasal fossa and intermaxillary distance when using the MISMARPE. CONCLUSION: The technique can be an effective and lower morbidity alternative to SARPE.

Comparison between sex and polymorphisms on FKBP5: perception of quality of life in non-syndromic patients. A cross-sectional study.

This study aimed to compare factors that influence perception of quality of life (QoL) in patients scheduled for orthognathic surgery. This was a cross-sectional study with 91 participants from two universities in Curitiba. The orthognathic quality of life questionnaire (OQLQ) was used to assess patients' perceptions of their QoL. Sociodemographic data were collected and facial profiles classified into classes I, II, and III. DNA was extracted from oral mucosal cells and markers rs3800373 and rs1360780 for FKBP prolyl isomerase 5 were genotyped. Statistical analysis was performed using Kruskal-Wallis, Mann-Whitney, and chi-squared tests, with a significance level of 5%. There was a negative impact on general perception of QoL in females (p = 0.019) and in the domains of "oral function" (p=0.032) and "awareness of the deformity" (p=0.009). In the dominant model (CC/CT), the presence of at least one C allele for the rs1360780 marker had a negative impact on QoL in the "facial aesthetics" domain (p = 0.037). The negative impact on QoL was greater in females than in males. The perception of QoL was more negative in individuals with rs1360780 polymorphism on the FKBP5 gene and a CC/CT genotype than it was in those with a TT genotype.

Effect of arthroscopic discopexy on condylar growth in adolescents with temporomandibular joint disc displacement without reduction: A retrospective self-controlled case series study.

This study was a retrospective self-controlled study that aimed to evaluate the effect of arthroscopic discopexy on condylar height and mandibular position in adolescents with temporomandibular joint (TMJ) anterior disc displacement without reduction (ADDwoR). Patients between 10 and 20 years of age and diagnosed with bilateral TMJ ADDwoR by magnetic resonance image (MRI) were included in this study. All patients underwent a period of natural course before arthroscopic surgery and then a follow-up period postoperatively. Changes in condylar height and mandibular position were measured by MRI and X-ray radiographs. Data were analyzed by paired t-test, Pearson correlation analysis, and generalized estimating equations. This study comprised a total of 40 patients with a mean age of 14.80 years. Pearson correlation analysis showed correlations between condylar height and mandibular position changes. The condylar height change during the post-operative period was significantly higher than that during natural course period (3.57 mm, p < 0.001). The changes in mandibular position (including ANB angle, SNB angle, and Pog-Np) were significant different (all p < 0.05) between the two periods. This study found that arthroscopic discopexy can promote condylar growth and correct dentofacial deformity in adolescents with bilateral TMJ ADDwoR.