Biomimetic bilayer scaffold from Bombyx mori silk materials for small diameter vascular applications in tissue engineering.

Enhancing the biocompatibility and mechanical stability of small diameter vascular scaffolds remain significant challenges. To address this challenge, small-diameter tubular structures were electrospun from silk fibroin (SF) from silk textile industry discarded materials to generate bilayer scaffolds that mimic native blood vessels, but derived from a sustainable natural material resource. The inner layer was obtained by directly dissolving SF in formic acid, while the middle layer (SF-M) was achieved through aqueous concentration of the protein. Structural and biological properties of each layer as well as the bilayer were evaluated. The inner layer exhibited nano-scale fiber diameters and 57.9% crystallinity, and degradation rates comparable with the SF-M layer. The middle layer displayed micrometer-scale fibers diameters with an ultimate extension of about 274%. Both layers presented contact angles suitable for cell growth and cytocompatibility, while the bilayer material displayed an intermediate mechanical response and a reduced enzymatic degradation rate when compared to each individual layer. The bilayer material emulates many of the characteristics of native small-diameter vessels, thereby suggesting further studies towards in vivo opportunities.

Fiber quality and fertility in male alpacas in the Cusco region of Peru.

Introduction: High testosterone levels might be associated with coarser fiber in alpacas, affecting fiber quality. In the husbandry systems employed in the Andes, males with higher libido might have an increased frequency of successful matings than males with lower libido. This study aimed to determine some of the factors affecting fiber quality in Peruvian alpacas and to evaluate the association between fiber quality and male mating behavior. Methods: The study population consisted of 189 adult male alpacas at La Raya, Cusco, Peru, at 4,400 m above sea level, belonging to the National University of San Marcos, Lima, and the National University of San Antonio Abad of Cusco. Fiber samples were collected from male alpacas in September 2015; body condition score (BCS) was evaluated. After washing and drying, the fiber samples were analyzed using an Optical Fiber Diameter Analyser 2000; linear regression analysis between predictor variables (location of alpacas, age, BCS, and fiber color) and fiber quality outcomes was conducted. Fertility data were available only for some males belonging to San Marcos University, consisting of hand-written records from the breeding season January to April 2015; individual fertility quotients were calculated for each male. Results: Age was associated with fiber quality, young alpacas having the finest fibers (p < 0.05). An increased BCS was associated with increased fiber length, fiber diameter and spinning fineness, but decreased comfort factor (p < 0.05). White fibers were thinner (p = 0.05) than colored fibers, with lower comfort factor and spinning fineness. A significant association between the fertility quotient and fiber curvature was observed (p = 0.018). Discussion: These results suggest that careful selection of breeding individuals and attention to husbandry could result in improved fiber quality among alpaca herds in Peru. However, it would be advisable to increase the number of males studied, using more reliable methods for evaluating male fertility and pregnancy diagnosis than were available for this study.

Zika Virus NS1 Protein Detection Using Gold Nanoparticle-Assisted Dynamic Light Scattering.

The Zika virus (ZIKV) is a global health threat due to its rapid spread and severe health implications, including congenital abnormalities and neurological complications. Differentiating ZIKV from other arboviruses such as dengue virus (DENV) is crucial for effective diagnosis and treatment. This study presents the development of a biosensor for detecting the ZIKV non-structural protein 1 (NS1) using gold nanoparticles (AuNPs) functionalized with monoclonal antibodies employing dynamic light scattering (DLS). The biosensor named ZINS1-mAb-AuNP exhibited specific binding to the ZIKV NS1 protein, demonstrating high colloidal stability indicated by a hydrodynamic diameter (DH) of 140 nm, detectable via DLS. In the absence of the protein, the high ionic strength medium caused particle aggregation. This detection method showed good sensitivity and specificity, with a limit of detection (LOD) of 0.96 µg mL-1, and avoided cross-reactivity with DENV2 NS1 and SARS-CoV-2 spike proteins. The ZINS1-mAb-AuNP biosensor represents a promising tool for the early and accurate detection of ZIKV, facilitating diagnostic and treatment capabilities for arboviral infections.

Jacobi-Fourier phase masks as ophthalmic elements to correct presbyopia.

PURPOSE: Investigations into the correction of presbyopia have considered lens design, clinical implications and the development of objective metrics such as the visual Strehl ratio. This study investigated the Jacobi-Fourier phase mask as an ophthalmic element in the correction of presbyopia. The goal was to develop a contact or intraocular lens whose performance was largely insensitive to changes in pupil diameter. METHODS: Numerical simulations based on Fourier optics were performed to evaluate three different Jacobi-Fourier polynomials, with the aim of providing a range of clear vision (1 Dioptre (D)). Performance was evaluated for three pupil sizes (6, 4 and 2 mm), while polychromatic images were simulated using three different wavelengths (656.3, 587.6 and 486.1 nm). The Neural Transfer function was included in the simulation. To validate the method and results, we used the Visual Strehl combined objective metric (VSCombined) currently used in visual optics. This metric gives more weight to the phase transfer function and is more suitable for non-symmetrical phase functions. RESULTS: Numerical validation showed the suitability of the Jacobi-Fourier phase masks for extending the range of clear vision of presbyopic eyes, providing a visual acuity of at least 0.10 logMAR (6/7.5 Snellen) at all distances between 1 and 6 m. The results show a range of clear vision of 1D was not affected by changes in pupil size, an increase in retinal image contrast accompanied by image artefact reduction by increasing the radial order of the Jacobi-Fourier phase mask and a reduction of wavelength dependence of the retinal images. These results are supported by simulated images and the objective criterion VSCombined. CONCLUSIONS: The use of Jacobi-Fourier phase masks as ophthalmic elements for presbyopic correction show promising results, with a good range of clear vision and reduced dependence on pupil size and chromatic aberration.

Do the apical limit and diameter of the instrumentation influence the extrusion of sodium hypochlorite solution? A micro-CT study.

This study evaluated the influence of the apical limit and the diameter of the instrumentation on the extrusion of the irrigating solution. Sixty human lower premolars were distributed into 5 groups according to the apical limit and diameter of the root canal instrumentation (n = 12): (G-140) R40 instrument 1 mm above the tooth length (TL) (Control); (G-150) R50 instrument 1 mm above the TL; (GF25) R25 instrument at the TL; (GF40) R40 instrument at the root canal length and (GF50) R50 instrument at the TL. A space of 33.5 ± 1 mm3 was created for storage of the extruded solution. Omnipaque contrast was added to the NaOCl solution in a 1:2 ratio, totaling 15 mL of solution to allow its visualization when extruded in microcomputed tomography. Final irrigation was performed with a syringe and needle and activated with a passive ultrasonic irrigation (PUI). Three activation cycles were performed. Data were tabulated and statistically analyzed (one-way ANOVA) with a significance level set at 5%. It was observed irrigating solution extrusion after final irrigation in all groups. However, there were no statistically significant differences among experimental groups, regardless of the diameter or apical limit of root canal instrumentation (p > 0.05). The different apical limits and diameters of root canal instrumentation did not influence the volume of extruded irrigating solution using passive ultrasonic irrigation.

Dendrochronological Analysis of Pinus pinea in Central Chile and South Spain for Sustainable Forest Management.

Pinus pinea is an important Mediterranean species due to its adaptability and tolerance to aridity and its high-quality pine nuts. Different forest types located in Mediterranean native and non-native environments provide the opportunity to perform comparative studies on the species' response to climate change. The aims of this study were to elucidate growth patterns of the species growing in native and exotic habitats and to analyze its response to climatic fluctuations, particularly drought, in both geographical contexts. Understanding stone pine (Pinus pinea) growth responses to climate variability in native and exotic habitats by comparing natural stands and plantations may provide useful information to plan adequate management under climate change. By doing so, we enhance the understanding of P. pinea's adaptability and provide practical approaches to its sustainable management. In this study, we reconstructed and compared the stem radial growth of seven stone pine stands, two in southern Spain and five in central-southern Chile, growing under different climatic conditions. We quantified the relationships between growth variability and climate variables (total rainfall, mean temperature, and SPEI drought index). Growth was positively correlated with autumn rainfall in plantations and with autumn-winter rainfall in natural stands. Growth was also enhanced by high autumn-to-spring rainfall in the driest Chilean plantation, whereas in the wettest and coolest plantation, such correlation was found in winter and summer. A negative impact of summer temperature was found only in one of the five Chilean plantations and in a Spanish site. The correlation between SPEI and tree-ring width indices showed different patterns between and within countries. Overall, exotic plantations showed lower sensitivity to climate variability than native stands. Therefore, stone pine plantations may be useful to assist in mitigating climate change.

Exploring developmental MeHg impact on extraembryonic and cardiac vessels and its effect on cardiomyocyte contractility.

The toxicity of methylmercury (MeHg) during embryonic development is a relevant issue that remains unclear and deserves investigation. In this sense, there is evidence that links the intake of contaminated food with cardiovascular pathologies in human adults and children. Thus, this study aimed to verify the impact of MeHg on the structure and integrity of extraembryonic and cardiac blood vessels and the contractile function of cardiomyocytes, also evaluating embryonic weight and the cardiosomatic index (CSI). Thus, chicken embryos, used as an experimental model, were exposed to a single dose of 0.1 µg MeHg/50 µl saline at E1.5 and analyzed at E10. After exposure, an increase in the number of extraembryonic blood vessels and the veins of the cardiac tissue was observed. These increases were accompanied by a reduction in the content of VEGF and VCAM proteins related to vessel growth and adhesiveness. Together, these results were related to reduced nitrite (NOx) levels. Furthermore, MeHg reduces the number of sarcomeres and increases the content of cardiac troponin I (cTnI), a protein that regulates contraction. In general, exposure to MeHg affected the integrity of extraembryonic and cardiac vessels and the contractile function of cardiomyocytes, which had a systemic impact evidenced by the reduction in embryonic weight gain and CSI.

Diurnal High Temperatures Affect the Physiological Performance and Fruit Quality of Highbush Blueberry (Vaccinium corymbosum L.) cv. Legacy.

In this study, the physiological performance and fruit quality responses of the highbush blueberry (Vaccinium corymbosum) cultivar Legacy to high temperatures (HTs) were evaluated in a field experiment. Three-year-old V. corymbosum plants were exposed to two temperature treatments between fruit load set and harvest during the 2022/2023 season: (i) ambient temperature (AT) and (ii) high temperature (HT) (5 °C ± 1 °C above ambient temperature). A chamber covered with transparent polyethylene (100 µm thick) was used to apply the HT treatment. In our study, the diurnal temperature was maintained with a difference of 5.03 °C ± 0.12 °C between the AT and HT treatments. Our findings indicated that HT significantly decreased CO2 assimilation (Pn) by 45% and stomatal conductance (gs) by 35.2% compared to the AT treatment. By contrast, the intercellular CO2 concentration (Ci) showed higher levels (about 6%) in HT plants than in AT plants. Fruit quality analyses revealed that the fruit weight and equatorial diameter decreased by 39% and 13%, respectively, in the HT treatment compared to the AT treatment. By contrast, the firmness and total soluble solids (TSS) were higher in the HT treatment than in the AT treatment. Meanwhile, the titratable acidity showed no changes between temperature treatments. In our study, Pn reduction could be associated with stomatal and non-stomatal limitations under HT treatment. Although these findings improve our understanding of the impact of HTs on fruit growth and quality in V. corymbosum, further biochemical and molecular studies are need.

Agronomic performance of forage corn for cattle feeding in Amazonas, Peru.

Corn (Zea mays) silage is an important and popular feed for dairy production in the Amazon region, so it is necessary to evaluate the agronomic performance of forage varieties of corn for cattle feeding in Amazonas. For this purpose, three corn varieties were evaluated (variety 1: Yellow Starchy Corn, variety 2: Chuska INIA 617, and variety 3: DOW 2B710), with two planting densities (density 1: 30 × 80 cm and density 2: 35 × 75 cm) and two fertilization conditions: with fertilization (F1) and without fertilization (F2). The parameters evaluated were plant height, number of leaves, leaf length and width, stem diameter, fresh forage, and dry matter. Student t-tests, correlation analysis of variables, and principal component analysis using R software version 4.1.3 were used for data analysis. The results indicated that variety 2 obtained the best values for the variables leaf width (12.33 cm) and stem diameter (3.25 cm), fresh forage (17.77 kg/m2), and dry matter (4.8 kg/m2), which would explain the directly proportional correlation found between leaf width and stem diameter with fresh forage and dry matter. The principal component analysis showed constant height and leaf length increases, and the best-evaluated parameters were associated with applying fertilizer. The variety that showed the best agronomic performance under Chachapoyas conditions was Chuska INIA 617, emerging as a potential feed for cattle.

Fat globule diameter in infant formulas.

OBJECTIVES: The lipid fraction, fatty acid profile, and diameter of fat globules of infant formulas show great differences from human milk. These characteristics influence fat digestion and, consequently, the development and health of infants. The aim of this study was to evaluate the diameter of fat globules in infant formulas and compare them with those in human milk. METHODS: The diameter of fat globules of 10 infant formulas and human milk samples was determined using scanning electron microscopy. RESULTS: The starter infant formula was the only one that showed a mean diameter value (3.52 ± 2.17 µm) similar to that obtained for human milk (3.44 ± 1.68 µm). The starter infant formula showed the highest values of volume-surface D3,2 (6.13 µm) and volume-weighted D4,3, (7.05 µm) mean diameters among the infant formulas analyzed, and close to those obtained for the human milk sample (5.16 and 5.98 µm, respectively). The infant formulas whey protein partially hydrolyzed, soy protein isolate-based, whey protein extensively hydrolyzed, and thickened with pregelatinized starch had the lowest mean diameters of fat globules 0.64 ± 0.22, 0.70 ± 0.19, 1.06 ± 0.34, and 1.22 ± 0.48 µm, respectively. CONCLUSION: The analysis of principal components showed that none of the analyzed infant formulas had similarity with the diameter of fat globules and the fatty acid profile of human milk.

The Association Between Ascending Aortic and Left Ventricular Dimensions in Patients After Aortic Valve Replacement.

INTRODUCTION: Aortic valve replacement (AVR) is often recommended for patients with severe aortic stenosis or chronic aortic regurgitation. These conditions result in remodeling of the left ventricle, including increased interstitial fibrosis that may persist even after AVR. These structural changes impact left ventricular (LV) mechanics, causing compromised LV diameter to occur earlier than reduced LV ejection fraction (LVEF). The aim of this study was to examine the effect of left ventricular end-diastolic diameter (LVEDD) and its role in aortic expansion one year after AVR. METHODS: Sixty-three patients who underwent AVR were evaluated. All patients underwent standard transthoracic echocardiography, which included measurements of the ascending aorta, aortic root, LVEF, and LVEDD before the surgery and one year postoperatively. Correlations between these variables were calculated. RESULTS: All patients underwent AVR with either a mechanical or biological prosthetic aortic valve. Following AVR, there was a significant decrease in the dimensions of the ascending aorta and aortic root (both P=0.001). However, no significant changes were observed in LVEDD and LVEF. Correlations were found between the preoperative ascending aortic size and the preoperative and one-year postoperative LVEDD (r=0.419, P=0.001 and r=0.320, P=0.314, respectively). Additionally, there was a correlation between the postoperative ascending aortic size and the preoperative and one-year postoperative LVEDD (r=0.320, P=0.003 and r=0.136, P=0.335, respectively). CONCLUSION: The study findings demonstrate a significant correlation between the size of the aortic root and ascending aorta, before and after AVR. Additionally, a notable correlation was observed between postoperative LVEDD and the size of the aortic root.

Reduced Pseudomonas aeruginosa Cell Size Observed on Planktonic Cultures Grown in the International Space Station.

Bacterial growth and behavior have been studied in microgravity in the past, but little focus has been directed to cell size despite its impact on a myriad of processes, including biofilm formation, which is impactful regarding crew health. To interrogate this characteristic, supernatant aliquots of P. aeruginosa cultured on different materials and media on board the International Space Station (ISS) as part of the Space Biofilms Project were analyzed. For that experiment, P. aeruginosa was grown in microgravity-with matching Earth controls-in modified artificial urine medium (mAUMg-high Pi) or LB Lennox supplemented with KNO3, and its formation of biofilms on six different materials was assessed. After one, two, and three days of incubation, the ISS crew terminated subsets of the experiment by fixation in paraformaldehyde, and aliquots of the supernatant were used for the planktonic cell size study presented here. The measurements were obtained post-flight through the use of phase contrast microscopy under oil immersion, a Moticam 10+ digital camera, and the FIJI image analysis program. Statistical comparisons were conducted to identify which treatments caused significant differences in cell dimensions using the Kruskal-Wallis and Dunn tests. There were statistically significant differences as a function of material present in the culture in both LBK and mAUMg-high Pi. Along with this, the data were also grouped by gravitational condition, media, and days of incubation. Comparison of planktonic cells cultured in microgravity showed reduced cell length (from 4% to 10% depending on the material) and diameter (from 1% to 10% depending on the material) with respect to their matching Earth controls, with the caveat that the cultures may have been at different points in their growth curve at a given time. In conclusion, smaller cells were observed on the cultures grown in microgravity, and cell size changed as a function of incubation time and the material upon which the culture grew. We describe these changes here and possible implications for human space travel in terms of crew health and potential applications.

Adherence to Treatment Guidelines in Ambulatory Heart Failure Patients with Reduced Ejection Fraction in a Latin-American Country: Observational Study of the Colombian Heart Failure Registry (RECOLFACA).

INTRODUCTION: Although several guidelines recommend that patients with heart failure with reduced ejection fraction (HFrEF) be treated with angiotensin-converting enzyme inhibitors/angiotensin II receptor blockers (ACEIs/ARBs) or angiotensin receptor-neprilysin inhibitors (ARNIs), beta-blockers, mineralocorticoid receptor antagonists (MRAs), and sodium-glucose cotransporter-2 inhibitor (SGLT2i), there are still several gaps in their prescription and dosage in Colombia. This study aimed to describe the use patterns of HFrEF treatments in the Colombian Heart Failure Registry (RECOLFACA). METHODS: Patients with HFrEF enrolled in RECOLFACA during 2017-2019 were included. Heart failure (HF) medication prescription and daily dose were assessed using absolute numbers and proportions. Therapeutic schemes of patients treated by internal medicine specialists were compared with those treated by cardiologists. RESULTS: Out of 2,528 patients in the registry, 1,384 (54.7%) had HFrEF. Among those individuals, 88.9% were prescribed beta-blockers, 72.3% with ACEI/ARBs, 67.9% with MRAs, and 13.1% with ARNIs. Moreover, less than a third of the total patients reached the target doses recommended by the European HF guidelines. No significant differences in the therapeutic schemes or target doses were observed between patients treated by internal medicine specialists or cardiologists. CONCLUSION: Prescription rates and target dose achievement are suboptimal in Colombia. Nevertheless, RECOLFACA had one of the highest prescription rates of beta-blockers and MRAs compared to some of the most recent HF registries. However, ARNIs remain underprescribed. Continuous registry updates can improve the identification of patients suitable for ARNI and SGLT2i therapy to promote their use in clinical practice.

Structural and torque changes in implant components of different diameters subjected to mechanical fatigue.

OBJECTIVES: To evaluate torque maintenance and structural damage in implant components of different diameters subjected to a fatigue challenge. METHODS: Thirty 10-mm-long, morse taper connection, titanium dental implants and their corresponding one-piece abutments were divided into three groups (n = 10) according to implant diameter: 4.3 mm (I4.3), 3.5 mm (I3.5), and 2.9 mm (I2.9). The implants were placed into a load-bearing fixture simulating bone tissue (modified G10), and the abutments were screwed into the implants to a final torque of 20 Ncm for the I4.3 and I3.5 and 15 Ncm for I2.9. The torque was secured by a digital torque meter. Cone-beam computed tomography (CBCT) scans were acquired and post-processed (e-Vol DX software) for all implant/abutment sets before and after subjecting them to fatigue in 37 °C distilled water (2 million cycles, constant load and frequency). The removal torque was measured using the same digital torque meter to calculate the difference in torque before and after fatigue. RESULTS: I2.9 showed substantial structural deformation compared with the other implant diameters (I3.5 and I4.3). However, the experimental groups did not show statistical differences for abutment loosening. SIGNIFICANCE: Implants smaller than 3.5 mm in diameter have a higher probability of structural deformation than standard-diameter implants. The association between tomographic scans and e-Vol DX software showed satisfactory consistency with the direct assessment using the digital torque meter, offering an additional tool to evaluate implant component loosening and structural deformations.

On the Cut-Off Value of the Anteroposterior Diameter of the Midbrain Atrophy in Spinocerebellar Ataxia Type 2 Patients.

(1) Background: Spinocerebellar ataxias (SCA) is a term that refers to a group of hereditary ataxias, which are neurological diseases characterized by degeneration of the cells that constitute the cerebellum. Studies suggest that magnetic resonance imaging (MRI) supports diagnoses of ataxias, and linear measurements of the aneteroposterior diameter of the midbrain (ADM) have been investigated using MRI. These measurements correspond to studies in spinocerebellar ataxia type 2 (SCA2) patients and in healthy subjects. Our goal was to obtain the cut-off value for ADM atrophy in SCA2 patients. (2) Methods: This study evaluated 99 participants (66 SCA2 patients and 33 healthy controls). The sample was divided into estimations (80%) and validation (20%) samples. Using the estimation sample, we fitted a logistic model using the ADM and obtained the cut-off value through the inverse of regression. (3) Results: The optimal cut-off value of ADM was found to be 18.21 mm. The area under the curve (AUC) of the atrophy risk score was 0.957 (95% CI: 0.895-0.991). Using this cut-off on the validation sample, we found a sensitivity of 100.00% (95% CI: 76.84%-100.00%) and a specificity of 85.71% (95% CI: 42.13%-99.64%). (4) Conclusions: We obtained a cut-off value that has an excellent discriminatory capacity to identify SCA2 patients.

Correlation between Diameter of Yolk Sac on Transvaginal Ultrasonography at 6-12 Weeks of Gestation and Adverse Pregnancy Outcomes.

OBJECTIVE: To evaluate the correlation between yolk sac diameter at 6 to 12 weeks of gestation measured via transvaginal ultrasound and adverse pregnancy outcomes. METHODS: This prospective cohort study was conducted at the Ain Shams University Maternity Hospital from July 1, 2019 to January 30, 2020. It included 120 pregnant women attending the outpatient clinic at 6 to 12 weeks of gestation. Transvaginal ultrasound was performed to measure inner yolk sac diameter. Normal diameter was considered to be 2-5 mm. Cases were followed up in routine antenatal care until the 16th week of gestation. RESULTS: Significant associations were found between maternal age and yolk sac diameter; yolk sac diameter and early miscarriage; a high percentage of cases of positive fetal life occurred when a normal yolk sac diameter (2-5 mm) was present (p<0.001); in yolk sac diameters <2mm positive fetal life was 0.0% and negative fetal life was 42.9%; in yolk sac diameters of 2-5mm positive fetal life was 81.1% and the negative fetal life was 7.1%; and in yolk sac diameters >5mm positive fetal life was 18.9% and negative fetal life was 50.0% (p<0.001), x2 60.094; and the best cutoff value for yolk sac diameter was >0.56, with a sensitivity of 78.6%, a specificity of 84.3%. CONCLUSIONS: We found a highly significant correlation between yolk sac diameter and early pregnancy loss.

The Association Between Ascending Aortic and Left Ventricular Dimensions in Patients After Aortic Valve Replacement

ABSTRACT Introduction: Aortic valve replacement (AVR) is often recommended for patients with severe aortic stenosis or chronic aortic regurgitation. These conditions result in remodeling of the left ventricle, including increased interstitial fibrosis that may persist even after AVR. These structural changes impact left ventricular (LV) mechanics, causing compromised LV diameter to occur earlier than reduced LV ejection fraction (LVEF). The aim of this study was to examine the effect of left ventricular end-diastolic diameter (LVEDD) and its role in aortic expansion one year after AVR. Methods: Sixty-three patients who underwent AVR were evaluated. All patients underwent standard transthoracic echocardiography, which included measurements of the ascending aorta, aortic root, LVEF, and LVEDD before the surgery and one year postoperatively. Correlations between these variables were calculated. Results: All patients underwent AVR with either a mechanical or biological prosthetic aortic valve. Following AVR, there was a significant decrease in the dimensions of the ascending aorta and aortic root (both P=0.001). However, no significant changes were observed in LVEDD and LVEF. Correlations were found between the preoperative ascending aortic size and the preoperative and one-year postoperative LVEDD (r=0.419, P=0.001 and r=0.320, P=0.314, respectively). Additionally, there was a correlation between the postoperative ascending aortic size and the preoperative and one-year postoperative LVEDD (r=0.320, P=0.003 and r=0.136, P=0.335, respectively). Conclusion: The study findings demonstrate a significant correlation between the size of the aortic root and ascending aorta, before and after AVR. Additionally, a notable correlation was observed between postoperative LVEDD and the size of the aortic root.

Using Optic Nerve Sheath Diameter for Intracranial Pressure (ICP) Monitoring in Traumatic Brain Injury: A Scoping Review.

INTRODUCTION: Neuromonitoring represents a cornerstone in the comprehensive management of patients with traumatic brain injury (TBI), allowing for early detection of complications such as increased intracranial pressure (ICP) [1]. This has led to a search for noninvasive modalities that are reliable and deployable at bedside. Among these, ultrasonographic optic nerve sheath diameter (ONSD) measurement is a strong contender, estimating ICP by quantifying the distension of the optic nerve at higher ICP values. Thus, this scoping review seeks to describe the existing evidence for the use of ONSD in estimating ICP in adult TBI patients as compared to gold-standard invasive methods. MATERIALS AND METHODS: This review was conducted in accordance with the Joanna Briggs Institute methodology for scoping reviews, with a main search of PubMed and EMBASE. The search was limited to studies of adult patients with TBI published in any language between 2012 and 2022. Sixteen studies were included for analysis, with all studies conducted in high-income countries. RESULTS: All of the studies reviewed measured ONSD using the same probe frequency. In most studies, the marker position for ONSD measurement was initially 3 mm behind the globe, retina, or papilla. A few studies utilized additional parameters such as the ONSD/ETD (eyeball transverse diameter) ratio or ODE (optic disc elevation), which also exhibit high sensitivity and reliability. CONCLUSION: Overall, ONSD exhibits great test accuracy and has a strong, almost linear correlation with invasive methods. Thus, ONSD should be considered one of the most effective noninvasive techniques for ICP estimation in TBI patients.

Biomechanical impact of labiolingual diameter on endodontically treated anterior teeth with crown restoration under occlusal loading

Abstract Objective To evaluate the effect of the labiolingual diameter and construction of an endodontically treated (ET) anterior tooth with crown restoration on stress distribution and biomechanical safety under occlusal loading. Methodology Three-dimensional finite element models were generated for maxillary central incisors with all-ceramic crown restorations. The labiolingual diameters of the tooth, defined as the horizontal distance between the protrusion of the labial and lingual surfaces, were changed as follows: (D1) 6.85 mm, (D2) 6.35 mm, and (D3) 5.85 mm. The model was constructed as follows: (S0) vital pulp tooth; (S1) ET tooth; (S2) ET tooth with a 2 mm ferrule, restored with a fiber post and composite resin core; (S3) ET tooth without a ferrule, restored with a fiber post and composite resin core. A total of 12 models were developed. In total, two force loads (100 N) were applied to the crown's incisal edge and palatal surface at a 45° oblique angle to the longitudinal axis of the teeth. The Von Mises stress distribution and maximum stress of the models were analyzed. Results Regardless of the loading location, stress concentration and maximum stress (34.07~66.78MPa) in all models occurred in the labial cervical 1/3 of each root. Both labiolingual diameter and construction influenced the maximum stress of the residual tooth tissue, with the impact of the labiolingual diameter being greater. A reduction in labiolingual diameter led to increased maximum stress throughout the tooth. The ferrule reduced the maximum stress of the core of S2 models (7.15~10.69 MPa), which is lower compared with that of S3 models (19.45~43.67 MPa). Conclusion The labiolingual diameter exerts a greater impact on the biomechanical characteristics of ET anterior teeth with crown restoration, surpassing the influence of the construction. The ferrule can reduce the maximum stress of the core and maintain the uniformity of stress distribution.

Pelvic diameter is not associated with positive circumferential resection margin in rectal cancer: retrospective analysis of 78 cases

Objective: To identify if there is an association between pelvic entry and pelvic outlet diameters with increased positive circumferential resection margin (CRM) in rectal cancer. Introduction: Positive CRMin rectalcancerisa majorpredictor forlocal anddistant recurrence. Pelvic diameters may be related to the difficulty of dissection, as well as intrinsic tumor characteristics such as tumor size, location, distance from the anal margin, and T stage, which may compromise the integrity of the mesorectum and circumferential margin involvement. Methods: A retrospective review of the patient's medical records who underwent surgical resection of rectal adenocarcinoma from January 2012 to June 2022 was performed. The patient's preoperative staging, operative characteristics, and histopathologic outcomes were gathered from the medical records. Preoperative MRI scanning was done in all patients. MRI pelvimetry was done by two observers. CRM involvement was recorded as stated in the pathology report. Pelvimetry variables were dichotomized according to their mean values for correlation analysis. The odds ratio (OR) was calculated from a binary logistics regression model to assess the relation between the positive CRM and the independent variables. Results: A total of 78 patients were included in this study. A positive CRM was reported in 10 patients (12.8%). BMI >27.4 + 6.6 (p = 0.02), positive extramural vascular invasion (p = 0.027), positive CRM by MRI scanning (p = 0.004), and anal sphincter involvement (p = 0.03) were associated with positive CRM. Pelvimetry values were not associated with a positive CRM. Conclusion: No association was found between the pelvic diameters measured by MRI pelvimetry with a positive CRM. (AU)