A Snapshot, Using a Multi-Omic Approach, of the Metabolic Cross-Talk and the Dynamics of the Resident Microbiota in Ripening Cheese Inoculated with Listeria innocua.

Raw milk cheeses harbor complex microbial communities. Some of these microorganisms are technologically essential, but undesirable microorganisms can also be present. While most of the microbial dynamics and cross-talking studies involving interaction between food-derived bacteria have been carried out on agar plates in laboratory-controlled conditions, the present study evaluated the modulation of the resident microbiota and the changes of metabolite production directly in ripening raw milk cheese inoculated with Listeria innocua strains. Using a proxy of the pathogenic Listeria monocytogenes, we aimed to establish the key microbiota players and chemical signals that characterize Latteria raw milk cheese over 60 days of ripening time. The microbiota of both the control and Listeria-inoculated cheeses was analyzed using 16S rRNA targeted amplicon sequencing, while direct analysis in real time mass spectrometry (DART-HRMS) was applied to investigate the differences in the metabolic profiles of the cheeses. The diversity analysis showed the same microbial diversity trend in both the control cheese and the inoculated cheese, while the taxonomic analysis highlighted the most representative genera of bacteria in both the control and inoculated cheese: Lactobacillus and Streptococcus. On the other hand, the metabolic fingerprints revealed that the complex interactions between resident microbiota and L. innocua were governed by continuously changing chemical signals. Changes in the amounts of small organic acids, hydroxyl fatty acids, and antimicrobial compounds, including pyroglutamic acid, hydroxy-isocaproic acid, malic acid, phenyllactic acid, and lactic acid, were observed over time in the L. innocua-inoculated cheese. In cheese that was inoculated with L. innocua, Streptococcus was significantly correlated with the volatile compounds carboxylbenzaldheyde and cyclohexanecarboxylic acid, while Lactobacillus was positively correlated with some volatile and flavor compounds (cyclohexanecarboxylic acid, pyroxidal acid, aminobenzoic acid, and vanillic acid). Therefore, we determined the metabolic markers that characterize a raw milk cheese inoculated with L. innocua, the changes in these markers with the ripening time, and the positive correlation of flavor and volatile compounds with the resident microbiota. This multi-omics approach could suggest innovative food safety strategies based on the enhanced management of undesirable microorganisms by means of strain selection in raw matrices and the addition of specific antimicrobial metabolites to prevent the growth of undesirable microorganisms.

Recent advances in the application of direct analysis in real time-mass spectrometry (DART-MS) in food analysis.

Direct analysis in real time-mass spectrometry (DART-MS) has evolved as an effective analytical technique for the rapid and accurate analysis of food samples. The current advancements of DART-MS in food analysis are described in this paper. We discussed the DART principles, which include devices, ionization mechanisms, and parameter settings. Numerous applications of DART-MS in the fields of food and food products analysis published during 2018-2023 were reviewed, including contamination detection, food authentication and traceability, and specific analyte analysis in the food matrix. Furthermore, the challenges and limitations of DART-MS, such as matrix effect, isobaric component analysis, cost considerations and accessibility, and compound selectivity and identification, were discussed as well.

Ambient mass spectrometry imaging of food natural products by angled direct analysis in real time high-resolution mass spectrometry.

Direct surface analysis in ambient conditions provides information on the position and chemical composition of an object at the time of investigation. An angled sampling probe is developed in this work for direct analysis in real time (DART) ionization high-resolution mass spectrometry. The DART ion source and the interface were modified for improved surface resolution, increased ion transfer efficiency, as well as enabling two-dimensional surface scanning. The angled probe DART-MS system was used for investigating a variety of food samples including fruit peels, ginseng root, plant leaves and sections of radish. Abundant signals and distinct chemical profiles are obtained in seconds, and spatial distribution of different molecules across the sample surfaces can be observed. In addition, the developed system can quickly identify the chemical changes when the surfaces were treated. The method is capable of directly evaluating food sample surfaces with different shapes, hardness, and conditions, without any sample pretreatments.

Automatic MDSPE Combined with DART-HRMS for the Rapid Quantitation of 21 Synthetic Cathinones in Urine.

A new, rapid, and automated method for the quantitation of 21 synthetic cathinones in urine was established using magnetic dispersive solid-phase extraction (MDSPE) in combination with direct analysis in real time-high-resolution mass spectrometry (DART-HRMS). Sample preparation and quantitation were verified by liquid chromatography-tandem mass spectrometry (LC-MS/MS). Methcathinone-D3, α-PVP-D8, and proadifen (SKF525A) were used as internal standards. Magnetic HLB extractant and NaH2PO4/NaOH buffer (0.2 M, pH 7) were used in automatic MDSPE. All 21 synthetic cathinones could be detected and analyzed by DART-HRMS in under 1 min. It was proven that the linearities of 21 synthetic cathinones were suitable (R2 > 0.99) in the concentration ranges of 0.5-100 ng/mL or 1-100 ng/mL. The precision and accuracy values were all within ±15%, and the samples were stable under various conditions. The average time of each sample from preprocessing to completion of detection was approximately 2 min, allowing for rapid sample analysis. The relative error (RE) of the concentrations obtained by DART-HRMS and LC-MS/MS were within ±13.61%, and the linear coefficient (R) was 0.9964. The results of DART-HRMS and LC-MS/MS provided equivalent values at the 95% confidence level. In summary, a simple, fast, and convenient quantitation method via DART-HRMS was established. This application can be utilized to reduce backlogs and promote rapid case processing.

Differentiation of Four Polyvinylidene Fluoride Polymers Based on Their End Groups by DART-FT-ICR MS and Kendrick Plots.

Nowadays, synthetic polymers are produced and used in many materials for different applications. Matrix-assisted laser desorption/ionization or electrospray mass spectrometry are classically used to investigate them, but these techniques require sample preparation steps, which are not always suitable for the study of insoluble or formulated polymers. Alternatively, direct real-time (DART) ionization analysis may be conducted without sample preparation. Four polyvinylidene fluoride (PVDF) polymers involving the C2H2F2 repeating unit coming from different suppliers have been analyzed by DART Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) in negative-ion mode. The obtained mass spectra systematically displayed an oligomeric distribution between m/z 400 and 1300 of [M - H]-, [M + O2]•-, and [M + NO2]- ions. Kendrick plots were used to ease the identification of PVDF end-groups and establish a difference between the samples. Both commercial PVDF polymers shared the same α+ω end groups formula, which confirmed a similar polymerization process for their synthesis. The two other PVDFs were clearly different from the commercial ones by the occurrence of specific end-groups. MS/MS and MS3 experiments were conducted to obtain structural information on these end-groups.

Analysis of feed additives by DART mass spectrometry: method optimisation and applications for product traceability in the European Union focusing on coccidiostats and carotenoids.

In this study, direct analysis in real time high resolution mass spectrometry (DART-HRMS) was used to investigate the accurate characterisation of feed additive formulations containing coccidiostats or carotenoids. The study demonstrates the efficacy of DART-HRMS in identifying the active substances in these formulations and distinguishing between feed additives with the same active substance. The protocol for this method involves two simple steps that are extracting samples with organic solvents and measuring the extracts with DART-HRMS. The study also employs various statistical tools, including a factorial design approach, to optimise the DART-HRMS settings, and multivariate statistics, to establish classification models for feed additive formulations using nominal mass spectra. Our study demonstrates the potential of DART-HRMS in ensuring the correct identification of feed additives containing various coccidiostats or carotenoids and proposes this tool as an additional means for compliance checks with EU regulations.

Recent application of direct analysis in real time mass spectrometry in plant materials analysis with emphasis on traditional Chinese herbal medicine.

Direct analysis in real time (DART) represents a new generation of ionization techniques that are used to rapidly ionize small molecules under ambient environments. The combination of DART with various mass spectrometry (MS) instruments allows analyzing multiple plant materials, including traditional Chinese herbal medicines (TCHMs), under simple or no sample treatment conditions. This review discussed the DART principles, including devices, ionization mechanisms, and operation parameters. Typical spectra detected by DART-MS were exhibited and discussed. Numerous applications of DART-MS in the fields of plant material and TCHM analysis were reviewed, including compound identification, biomarker discovery, fingerprinting analysis, and quantification analysis. Besides, modifications and improvements of DART-MS, such as hyphenated application with other separation methods, laser-based desorption techniques, and online sampling configuration, were summarized as well.

On the challenge of unambiguous identification of fentanyl analogs: Exploring measurement diversity using standard reference mass spectral libraries.

Fentanyl analogs are a class of designer drugs that are particularly challenging to unambiguously identify due to the mass spectral and retention time similarities of unique compounds. In this paper, we use agglomerative hierarchical clustering to explore the measurement diversity of fentanyl analogs and better understand the challenge of unambiguous identifications using analytical techniques traditionally available to drug chemists. We consider four measurements in particular: gas chromatography retention indices, electron ionization mass spectra, electrospray ionization tandem mass spectra, and direct analysis in real time mass spectra. Our analysis demonstrates how simultaneously considering data from multiple measurement techniques increases the observable measurement diversity of fentanyl analogs, which can reduce identification ambiguity. This paper further supports the use of multiple analytical techniques to identify fentanyl analogs (among other substances), as is recommended by the Scientific Working Group for the Analysis of Seized Drugs (SWGDRUG).

[Determination of 41 veterinary drug residues in livestock and poultry meat using a composite purification system coupled with direct analysis in real time-tandem mass spectrometry].

In a market environment where food safety problems still occur despite repeated prohibitions, food safety problems caused by veterinary drug residues and biological safety problems caused by the transfer of drug resistance have attracted much attention. Herein, a method based on a compound purification system coupled with direct analysis in real time-tandem mass spectrometry (DART-MS/MS) was established to determine 41 different types of veterinary drug residues in livestock and poultry products. First, a single-standard solution sampling method was used to optimize the selection of the best quasi-molecular ion, two daughter ions, and their cone-hole and collision voltages; qualitative and quantitative ion pairs are composed of a quasi-molecular ion and its corresponding daughter ion. The abundance ratios of the drug compounds in standard solutions of the solvent and matrix mixtures were then calculated according to the requirements of the European Union 2002/657 specification. DART-MS/MS was subsequently developed for the accurate characterization and quantitative analysis of the veterinary drugs. Finally, a composite purification pretreatment system was formed by combining the primary secondary amine (PSA) and octadecyl bonded silica gel (C18) of a QuEChERS technology with multiwalled carbon nanotubes (MWCNTs) to achieve the one-step purification of the drug compounds. The influence of the key parameters of the DART ion source on the determination of the drugs was investigated using the peak areas of the quantitative ions as the criterion. The optimum conditions were as follows: ion source temperature of 350 ℃, 12-Dip-it Samplers module, sample injection speed of 0.6 mm/s, and external vacuum pump pressure of -75 kPa. According to the differences in the dissociation constant (pKa) ranges of the 41 types of veterinary drug compounds and the characteristics of the sample matrixes, the extraction solvent, matrix-dispersing solvent, and purification method were optimized based on the recovery. The extraction solvent was 1.0% acetonitrile formate solution, and the pretreatment column included MWCNTs containing 50 mg of PSA and 50 mg of C18. The three chloramphenicol drugs showed a linear relationship in the ranges of 0.5-20 µg/L with correlation coefficients of 0.9995-0.9997,and the detection and quantification limits of three chloramphenicol drugs were 0.1 and 0.5 µg/kg, respectively. The 38 other drugs, including quinolones, sulfonamides, and nitro-imidazoles showed a linear relationship in the ranges of 2-200 µg/L with correlation coefficients of 0.9979-0.9999, and the detection and quantification limits of the 38 other drugs were 0.5 and 2.0 µg/kg, respectively. The recoveries of the 41 veterinary drugs at low, medium, and high spiked levels in chicken, pork, beef, and mutton samples were 80.0%-109.6%, with intra- and inter-day precisions of 0.3%-6.8% and 0.4%-7.0%, respectively. A total of 100 batches of animal meat (pork, chicken, beef, and mutton; 25 batches each) and known positive samples were simultaneously analyzed using the national standard method and the detection method established in this study. Sulfadiazine (89.2, 78.1, and 105.3 µg/kg) was detected in three batches of pork samples, and sarafloxacin (56.3, 102.0 µg/kg) was detected in two batches of chicken samples and no veterinary drugs were detected in the other samples; both methods yielded consistent results for known positive samples. The proposed method is rapid, simple, sensitive, environmentally friendly, and suitable for the simultaneous screening and detection of multiple veterinary drug residues in animal meat.

New Method Based on the Direct Analysis in Real Time Coupled with Time-of-Flight Mass Spectrometry to Investigate the Thermal Depolymerization of Poly(methyl methacrylate).

In this work, the isothermal decomposition of poly(methyl methacrylate) synthesized in bulk by the radical route of methyl methacrylate in the presence of azobisisobutyronitrile as the initiator was carried out and monitored for the first time with the DART-Tof-MS technique at different temperatures. Nuclear magnetic resonance (NMR) analysis revealed a predominantly atactic microstructure, and size-exclusion chromatography (SEC) analysis indicated a number average molecular weight of 3 × 105 g·mol-1 and a polydispersity index of 2.47 for this polymer. Non-isothermal decomposition of this polymer carried out with thermogravimetry analysis (TGA) showed that the weight loss process occurs in two steps. The first one starts at approximately 224 °C and the second at 320 °C. The isothermal decomposition of this polymer carried out and monitored with the DART-Tof-MS method revealed only one stage of weight loss in this process, which begins at approximately 250 °C, not far from that of the second step observed in the case of the non-isothermal process conducted with the TGA method. The results obtained with the MS part of this technique revealed that the isothermal decomposition of this polymer regenerates a significant part of methyl methacrylate monomer, which increases with temperature. This process involves radical chain reactions leading to homolytic chain scissions and leading to the formation of secondary and tertiary alkyl radicals, mainly regenerating methyl methacrylate monomer through an unzipping rearrangement. Although they are in the minority, other fragments, such as the isomers of 2-methyl carboxyl, 4-methyl, penta-2,4-diene and dimethyl carbate, are also among the products detected. At 200 °C, no trace of monomer was observed, which coincides with the first step of the weight loss observed in the TGA. These compounds are different to those reported by other researchers using TGA coupled with mass spectrometry in which methyl isobutyrate, traces of methyl pyruvate and 2,3-butanonedione were detected.

Combined ambient ionization mass spectrometric and chemometric approach for the differentiation of hemp and marijuana varieties of Cannabis sativa.

BACKGROUND: Hemp and marijuana are the two major varieties of Cannabis sativa. While both contain Δ9-tetrahydrocannabinol (THC), the primary psychoactive component of C. sativa, they differ in the amount of THC that they contain. Presently, U.S. federal laws stipulate that C. sativa containing greater than 0.3% THC is classified as marijuana, while plant material that contains less than or equal to 0.3% THC is hemp. Current methods to determine THC content are chromatography-based, which requires extensive sample preparation to render the materials into extracts suitable for sample injection, for complete separation and differentiation of THC from all other analytes present. This can create problems for forensic laboratories due to the increased workload associated with the need to analyze and quantify THC in all C. sativa materials. METHOD: The work presented herein combines direct analysis in real time-high-resolution mass spectrometry (DART-HRMS) and advanced chemometrics to differentiate hemp and marijuana plant materials. Samples were obtained from several sources (e.g., commercial vendors, DEA-registered suppliers, and the recreational Cannabis market). DART-HRMS enabled the interrogation of plant materials with no sample pretreatment. Advanced multivariate data analysis approaches, including random forest and principal component analysis (PCA), were used to optimally differentiate these two varieties with a high level of accuracy. RESULTS: When PCA was applied to the hemp and marijuana data, distinct clustering that enabled their differentiation was observed. Furthermore, within the marijuana class, subclusters between recreational and DEA-supplied marijuana samples were observed. A separate investigation using the silhouette width index to determine the optimal number of clusters for the marijuana and hemp data revealed this number to be two. Internal validation of the model using random forest demonstrated an accuracy of 98%, while external validation samples were classified with 100% accuracy. DISCUSSION: The results show that the developed approach would significantly aid in the analysis and differentiation of C. sativa plant materials prior to launching painstaking confirmatory testing using chromatography. However, to maintain and/or enhance the accuracy of the prediction model and keep it from becoming outdated, it will be necessary to continue to expand it to include mass spectral data representative of emerging hemp and marijuana strains/cultivars.

Online coupling of matrix solid-phase dispersion to direct analysis in real time mass spectrometry for high-throughput analysis of regulated chemicals in consumer products.

The current work is the first study on online coupling of matrix solid-phase dispersion (MSPD) to direct analysis in real time mass spectrometry (DART-MS) bridging with solid-phase analytical derivatization (SPAD) based on a graphene oxide nanosheets (GONs)-coated cotton swab. Proof-of-concept demonstrations were explored for high-throughput analysis of a diversity of regulated chemicals in consumer products such as textiles, toys, and cosmetics. On-demand sorbent combinations were blended with samples, packed into MSPD columns, and mounted on a homemade 3D-printed rack module for automated sample feeding. To achieve good synergy between MSPD and DART-MS, a cotton swab with a conical tip deposited with GONs was attached to the bottom of the MSPD column. The swabs serve as a solid-phase microextraction probe for convenient enrichment of the eluted analytes from MSPD, thermal desorption of the enriched analytes by DART, and sensitive detection by a hybrid quadrupole-Orbitrap mass spectrometer. Furthermore, the utility of an on-swab SPAD strategy was demonstrated for the detection of formaldehyde by use of the derivatizing reagent of dansyl hydrazine, contributing to improved ionization efficiency without compromising the overall coherence of the analytical workflow. The MSPD-DART-MS methodology was systematically optimized and validated, obtaining acceptable recovery (71.7-110.3%), repeatability (11.8-19.3%), and sensitivity (limits of detection and quantitation in the ranges of 6.2-19.5 and 23.7-75.9 µg/kg) for 32 target analytes. The developed protocol streamlined sample extraction, clean-up, desorption, ionization, and detection, highlighting the appealing potential for high-throughput analysis of samples with complex matrices.

Influence of host-guest interactions on analytical performance of direct analysis in real-time mass spectrometry.

To systematically study the influence of host-guest interactions on the analytical performance of direct analysis in real time mass spectrometry (DART-MS), the interactions between cyclodextrins (CDs) and different Sudan dyes were investigated. The results showed that the host-guest interaction between CDs and Sudan dyes did not affect qualitative analysis of the target compounds, but led to a lower signal intensity for Sudan dyes, thus affecting quantitative analysis of the target compounds. The stronger the host-guest interaction, the weaker the signal intensity of target compound on DART-MS. The results also show that both in solution and in solid-phase microextraction (SPME), the addition of organic solvents can weaken the host-guest interaction between CDs and Sudan dyes, thus improving the signal intensity in DART-MS. In SPME, adding organic solvents has a certain practical value and can improve the efficiency of Sudan dye analysis. This study suggests that appropriate sample pretreatment is needed to weaken noncovalent interactions prior to DART-MS analysis to obtain more accurate quantitative results. The data provide some insight into the effects of other noncovalent interactions on the efficiency of DART-MS as an analytical tool, as well as the potential to study intermolecular interactions with DART-MS.

Rapid quantification of phenobarbital and barbital in human whole blood by liquid-liquid extraction combined with DART-orbitrap-HRMS.

PURPOSE: This study aims to develop and validate a rapid, simple, and efficient bioanalytical method for the simultaneous quantification of phenobarbital and barbital in human whole blood using liquid-liquid extraction combined with direct analysis in real time (DART) and high-resolution mass spectrometry (HRMS). METHOD: Phenobarbital-d5 and aprobarbital were selected as internal standards (ISs) of phenobarbital and barbital, respectively. A mixed solvent of o-xylene and ethyl acetate at a ratio of 1:6 was used to extract analytes of interest and ISs from 100 µL of human whole blood samples. Phenobarbital and barbital were detected by DART-HRMS. The proposed method has been validated in accordance with United States Food and Drug Administration Guidelines for Bioanalytical Method Validation in terms of selectivity, linearity, accuracy, precision, matrix effect, recovery, stability, and dilution integrity. RESULTS: The lower limits of quantification (LLOQs) of phenobarbital and barbital were both 10 ng/mL. The linearities were in the range of 10-1000 ng/mL (R2 ≥ 0.99). The mean recovery values of phenobarbital and barbital were 99.7% and 88.1%, respectively. The interday and intraday precision values were less than 10.4%, and the interday and intraday accuracy values ranged from 87.6 to 106.7%. Furthermore, the validated method was applied to four cases of phenobarbital poisoning at the Shanghai Institute of Forensic Science. CONCLUSION: The developed and fully validated method enabled the simultaneous quantification of phenobarbital and barbital in human whole blood and was successfully applied to authentic cases.

Characterization of ginsenoside structural isomers from mixtures using in situ methylation with direct analysis in real-time ionization tandem mass spectrometry.

Characterization of structural isomers of bioactive molecules is important for recognizing their functions, but it has been challenging due to their highly similar structures. As the main bioactive constituents of Panax ginseng, ginsenosides have different structural isomers attributed to the aglycone structure and glycosylation sites as well as stereochemistry of sugar groups attached. This work demonstrated a simple and robust in situ methylation reaction with tetramethylammonium hydroxide (TMAH) using ambient ionization source of direct analysis in real time (DART) to characterize saponin structural isomers. The DART ion source provides favorable conditions to methylate hydroxyl groups of ginsenoside instantaneously with TMAH, and it can ionize the methylated products at the same time. Methylated ginsenoside stereoisomers even with subtle structure differences generated very different mass signals from full-scan MS and tandem MS. High-resolution mass spectrometry aided the assignment of molecular structures of the various precursor and fragment ions from different ginsenosides, which provided structural information for both the aglycone skeleton and the sugar moieties in ginsenosides. The presented method was successfully used for the identification of ginsenosides in Panax ginseng, and saponin isomers were characterized without the need for chromatographic separation and/or tedious offline sample pretreatment.

The characterization of disperse dyes in polyester fibers using DART mass spectrometry.

Textile fibers alone are highly prevalent in our environment, and not only are there a wide variety of fibers, but generally, consumer textiles are colored. Given the variety of crime locations where dyes are encountered and the potential circumstances, a rapid, preparation free analysis of samples is highly beneficial. This study has characterized a collection of commercially available textiles dyes by verifying the chemical structure, collecting reference spectra, and developing a method to analyze dyed fibers via Direct Analysis in Real-Time (DART) mass spectrometry. A methodology for direct analysis of pieces of fabric and single thread samples of polyester fibers dyed with disperse dyes was developed. The presence of 31 target dyes on fibers whose structures were previously established via high-resolution mass spectrometry was confirmed. Dyed fabrics containing mixtures of dyes in varying concentrations were also evaluated to determine whether each dye in the composition could be detected. The DART-MS methodology was sensitive and positively characterized disperse dyes in polyester fibers, allowing for blind identification of mixtures with the assistance of a high-resolution mass spectrometry database.

Natural Deep Eutectic Solvent-Based Dispersive Liquid-Liquid Microextraction Coupled with Direct Analysis in Real Time Mass Spectrometry: A Green Temperature-Mediated Analytical Strategy.

Green analytical chemistry (GAC) represents a rapidly growing research field that aims at developing novel analytical approaches with minimal consumption of hazardous reagents and solvents. The current study reports on a GAC methodology exploiting the unique physicochemical properties of natural deep eutectic solvents (NADESs), a supposedly environmentally friendly class of solvents. Based on a temperature-mediated strategy, the NADESs were manipulated to undergo multiple phase transitions for favorable functionality and performance. As proof-of-concept demonstrations, both hydrophobic and hydrophilic NADESs were prepared for the extraction and analysis of eight phthalate esters in aqueous samples (food simulants) and three aflatoxins in oily samples (edible oils), respectively. NADES-based dispersive liquid-liquid microextraction (DLLME) was employed to achieve high-efficiency sample pretreatment. Afterward, the NADESs were transformed from liquids into solids by tuning the peripheral temperature for a convenient phase separation from the sample matrices. The solidified NADES extracts were melted and vaporized at elevated temperatures by transmission-mode direct analysis in real time (DART) for further quadrupole-Orbitrap high-resolution mass spectrometry (Q-Orbitrap HRMS) analysis. The developed protocol was validated, achieving good repeatability with relative standard deviations (RSDs) of less than 9% and satisfactory sensitivity with limits of detection (LODs) and quantitation (LOQs) ranging from 0.1 to 0.8 and 0.2 to 2.0 µg/kg, respectively. The greenness of the analytical methodology was assessed with the calculated scores of 0.66 and 0.57 for the hydrophobic and hydrophilic NADES-based protocols, respectively. The method was applied to marketed samples, highlighting the great potential for green chemical analysis.

Composition of Nonextractable Polyphenols from Sweet Cherry Pomace Determined by DART-Orbitrap-HRMS and Their In Vitro and In Vivo Potential Antioxidant, Antiaging, and Neuroprotective Activities.

Sweet cherry pomace is an important source of phenolic compounds with beneficial health properties. As after the extraction of phenolic compounds, a phenolic fraction called nonextractable polyphenols (NEPs) remains usually retained in the extraction residue, alkaline and acid hydrolyses and enzymatic-assisted extraction (EAE) were carried out in this work to recover NEPs from the residue of conventional extraction from sweet cherry pomace. In vitro and in vivo evaluation of the antioxidant, antihypertensive, antiaging, and neuroprotective capacities employing Caenorhabditis elegans was achieved for the first time. Extractable phenolic compounds and NEPs were separated and identified by families by high-performance thin-layer chromatography (HPTLC) with UV/Vis detection. A total of 39 phenolic compounds were tentatively identified in all extracts by direct analysis in real-time high-resolution mass spectrometry (DART-Orbitrap-HRMS). EAE extracts presented the highest in vitro and in vivo antioxidant capacity as well as the highest in vivo antiaging and neuroprotective capacities. These results showed that NEPs with interesting biological properties are retained in the extraction residue, being usually underestimated and discarded.

New Method Based on Direct Analysis in Real-Time Coupled with Time-of-Flight Mass Spectrometry (DART-ToF-MS) for Investigation of the Miscibility of Polymer Blends.

The miscibility of a series of binary blends such as polystyrene/poly(methyl methacrylate) (PS/PMMA), polystyrene/poly(vinyl chloride)(PS/PVC), poly(vinyl chloride)/poly(polymethyl methacrylate)(PVC/PMMA) and poly(ethylene-co-vinyl alcohol)/poly(lactide-co-glycolide acid) PEVAL/PLGA with equal ratios and poly(ethylene oxide)/poly(hydroxyl propyl methyl cellulose) (PEO/PHPMC) containing 30 and 70 wt% PEO, which were randomly chosen among the widely systems reported in the literature, was investigated by a new method based on a direct analysis in real-time coupled with time-of-flight mass spectrometry (DART-ToF-MS). To reach this goal these pairs of polymers and copolymers were prepared by solvent casting method. As a first step, the DSC technique was undertaken in this work to highlight the published results on the miscibility of these binary systems. The thermogravimetry analysis (TGA) was used to define the optimum decomposition temperature of these blends programmed for the study of miscibility using the DART-ToF-MS technique. The results obtained by this method based on the comparison of the nature of the fragments resulting from the isothermal decomposition of the blend with those of their pure components have been very effective in demonstrating the character of miscibility of these systems. Indeed, it was found that the PS/PMMA-50 and PS/PVC-50 blends were immiscible, PVC/PMMA-50 and PEVAL/PLGA-50 miscible, and the PEO/PHMC partially miscible. This method, which is rapid and uses a very small amount of sample (1-2 mg) can be extended in its application to other blends whose other methods used have shown their limits due to the intrinsic properties of the polymers involved.