RESUMEN
Tactile and pain perception are essential for biological skin to interact with the external environment. This complex interplay of sensations allows for the detection of potential threats and appropriate responses to stimuli. However, the challenge is to enable flexible electronics to respond to mechanical stimuli such as biological skin, and researchers have not clearly reported the successful integration of somatic mechanical perception and sensation management functions into neuro-like electronics. In this work, an afferent nerve-like device with a pressure sensor and a perception management module is proposed. The pressure sensor comprises two conductive fabric layers and an ionic hydrogel, forming a capacitor structure that emulates the swift transition from tactile to pain perception under mechanical stimulation. Drawing inspiration from the neuronal "gate control" mechanism, the sensation management module adjusts signals in response to rubbing, accelerating the discharge process and reducing the perception duration, thereby replicating the inhibitory effect of biological neurons on pain following tactile interference. This integrated device, encompassing somatic mechanical perception and sensation management, holds promise for applications in soft robotics, prosthetics, and human-machine interaction.
Asunto(s)
Técnicas Biosensibles , Diseño de Equipo , Humanos , Técnicas Biosensibles/instrumentación , Tacto/fisiología , Dispositivos Electrónicos Vestibles , Piel , Neuronas Aferentes/fisiología , Hidrogeles/química , Percepción del Tacto/fisiología , Percepción del Dolor/fisiologíaRESUMEN
This study investigates three carbide-derived carbon (CDC) materials (TiC, NbC, and Mo2C) characterized by uni-, bi-, and tri-modal pore sizes, respectively, for energy storage in both neat and acetonitrile-diluted 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide. A distribution of micro- and mesopores was studied through low-temperature N2 and CO2 adsorption. To elucidate the relationships between porosity and the electrochemical properties of carbon materials, cyclic voltammetry, galvanostatic cycling, and electrochemical impedance spectroscopy measurements were conducted using three-electrode test cells. The ultramicroporous TiC-derived carbon is characterized by a high packing density of 0.85 g cm-3, resulting in superior cathodic and anodic capacitances for both neat ionic liquid (IL) and a 1.9 M IL/acetonitrile electrolyte (93.6 and 75.8 F cm-3, respectively, in the dilute IL). However, the bi-modal pore-sized microporous NbC-derived carbon, with slightly lower cathodic and anodic capacitances (i.e., 85.0 and 73.7 F cm-3 in the dilute IL, respectively), has a lower pore resistance, making it more suitable for real-world applications. A symmetric two-electrode capacitor incorporating microporous CDC-NbC electrodes revealed an acceptable cycle life. After 10,000 cycles, the cell retained approximately 75% of its original capacitance, while the equivalent series resistance (ESR) only increased by 13%.
RESUMEN
A TiC-derived carbon (CDC) and its partially oxidized derivative (ox-red-CDC), oxidized by a modified Hummers method, were studied as promising electrode materials for electrochemical energy storage. To evaluate the electrochemical properties of the carbon materials, cyclic voltammetry, galvanostatic cycling, and electrochemical impedance spectroscopy measurements were performed in 1 M Li2SO4 using 2- and 3-electrode cells. A partially oxidized surface was shown to improve the capacitance and electrochemical stability of a nanoporous CDC at positive potential values. The respective anodic capacitance of 80 F cm-3 reveals a 15% improvement over the non-oxidized CDC. At negative potential values, the capacitance of two carbon materials is almost equal, 97 vs. 93 F cm-3, for the non-oxidized and partially oxidized CDC materials, respectively. An asymmetric 2-electrode ultracapacitor containing ox-red-CDC as the anode and pristine CDC as the cathode demonstrated an excellent cycle life. The temporary repolarization of the 2-electrode cell after thousands of charge-discharge cycles increased the capacitance and improved the cycling characteristics, likely due to regeneration and cleaning of the electrode surface.
RESUMEN
Stable and ionic conducting electrolytes are needed to make supercapacitors more feasible, because liquid electrolytes have leakage problems and easily undergo solvent evaporation. Polymer-based electrolytes meet the criteria, yet they lack good efficiency due to limited segmental motion. Since metal complexes have crosslinking centers that can be coordinated with the polymer segments, they are regarded as an adequate method to improve the performance of the polymer-based electrolytes. To prepare plasticized proton conducting polymer composite (PPC), a simple and successful process was used. Using a solution casting process, methylcellulose and dextran were blended and impregnated with ammonium thiocyanate and zinc metal complex. A range of electrochemical techniques were used to analyze the PPC, including transference number measurement (TNM), linear sweep voltammetry (LSV), cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), and electrochemical impedance spectroscopy (EIS). The ionic conductivity of the prepared system was found to be 3.59 × 10-3 S/cm using the EIS method. The use of glycerol plasticizer improves the transport characteristics, according to the findings. The carrier species is found to have ionic mobility of 5.77 × 10-5 cm2 V-1 s-1 and diffusion coefficient of 1.48 × 10-6 cm2 s-1 for the carrier density 3.4 × 1020 cm-3. The TNM revealed that anions and cations were the predominant carriers in electrolyte systems, with an ionic transference value of 0.972. The LSV approach demonstrated that, up to 2.05 V, the film was stable, which is sufficient for energy device applications. The prepared PPC was used to create an electrical double-layer capacitor (EDLC) device. The CV plot exhibited the absence of Faradaic peaks in the CV plot, making it practically have a rectangular form. Using the GCD experiment, the EDLC exhibited low equivalence series resistance of only 65 Ω at the first cycle. The average energy density, power density, and specific capacitance values were determined to be 15 Wh/kg, 350 W/kg, and 128 F/g, respectively.
RESUMEN
The increasing use of rapidly fluctuating renewable energy sources, such as sunlight, has necessitated the use of supercapacitors, which are a type of energy storage system with high power. Chemically exfoliated graphene oxide (GO) is a representative starting material in the fabrication of supercapacitor electrodes based on reduced GO (rGO). However, the restacking of rGO sheets driven by π-π stacking interactions leads to a significant decrease in the electrochemically active surface area, leading to a loss of energy density. Here, to effectively inhibit restacking and construct a three-dimensional wrinkled structure of rGO (3DWG), we propose an agarose gel-templating method that uses agarose gel as a soft and removable template. The 3DWG, prepared via the sequential steps of gelation, freeze-drying, and calcination, exhibits a macroporous 3D structure and 5.5-fold higher specific capacitance than that of rGO restacked without the agarose template. Further, we demonstrate a "gel-stamping" method to fabricate thin-line patterned 3DWG, which involves the gelation of the GO-agarose gel within micrometer-sized channels of a customized polydimethylsiloxane (PDMS) mold. As an easy and low-cost manufacturing process, the proposed agarose gel templating method could provide a promising strategy for the 3D structuring of rGO.
RESUMEN
The aim of the present paper is to investigate the possibility of using the dipole dimer as water model in describing the electrical double layer capacitor capacitance behaviors. Several points are confirmed. First, the use of the dipole dimer water model enables several experimental phenomena of aqueous electrical double layer capacitance to be achievable: suppress the differential capacitance values gravely overestimated by the hard sphere water model and continuum medium water model, respectively; reproduce the negative correlation effect between the differential capacitance and temperature, insensitivity of the differential capacitance to bulk electrolyte concentration, and camel-shaped capacitance-voltage curves; and more quantitatively describe the camel peak position of the capacitance-voltage curve and its dependence on the counter-ion size. Second, we fully illustrate that the electric dipole plays an irreplaceable role in reproducing the above experimentally confirmed capacitance behaviors and the previous hard sphere water model without considering the electric dipole is simply not competent. The novelty of the paper is that it shows the potential of the dipole dimer water model in helping reproduce experimentally verified aqueous electric double layer capacitance behaviors. One can expect to realize this potential by properly selecting parameters such as the dimer site size, neutral interaction, residual dielectric constant, etc.
RESUMEN
Supercapacitors have shown great potential as a possible solution to the increasing global demand for next-generation energy storage systems. Charge repositioning is based on physical or chemical mechanisms. There are three types of supercapacitors-the electrochemical double layer, the pseudocapacitor, and a hybrid of both. Each type is further subdivided according to the material used. Herein, a detailed overview of the working mechanism as well as a new method for capacitance enhancement are presented.
RESUMEN
Coffee is one of the largest agricultural products; however, the majority of the produced coffee is discarded as waste sludge by beverage manufacturers. Herein, we report the use of graphitic porous carbon materials that have been derived from waste coffee sludge for developing an energy storage electrode based on a hydrothermal recycling procedure. Waste coffee sludge is used as a carbonaceous precursor for energy storage due to its greater abundance, lower cost, and easier availability as compared to other carbon resources. The intrinsic fibrous structure of coffee sludge is based on cellulose and demonstrates enhanced ionic and electronic conductivities. The material is primarily composed of cellulose-based materials along with several heteroatoms; therefore, the waste sludge can be easily converted to functionalized carbon. The production of unique graphitic porous carbon by hydrothermal carbonization of coffee sludge is particularly attractive since it addresses waste handling issues, offers a cheaper recycling method, and reduces the requirement for landfills. Our investigations revealed that the graphitic porous carbon electrodes derived from coffee sludge provide a specific capacitance of 140 F g-1, with 97% retention of the charge storage capacity after 1500 cycles at current density of 0.3 A g-1.
RESUMEN
In this study, activated polymer-based hard carbon using steam activation (APHS) with mesopore-rich pore structures were prepared for application as electrodes in electrical double-layer capacitors (EDLC). The surface morphologies and structural characteristics of APHS were observed using scanning electron microscopy and X-ray diffraction analysis, respectively. The textural properties were described using Brunauer-Emmett-Teller and Barrett-Joyner-Halenda equations with N2/77 K adsorption isotherms. APHS were prepared under various steam activation conditions to find optimal ones, which were then applied as electrode materials for the EDLC. The observed specific surface areas and total pore volumes of the APHS were in the range 1170-2410 m2/g and 0.48-1.22 cm3/g, respectively. It was observed that pore size distribution mainly depended on the activation time and temperature, and that the volume of pores with size of 1.5-2.5 nm was found to be a key factor determining the electrochemical capacity.
RESUMEN
Porous carbons have been extensively studied in supercapacitors. However, it remains a grand challenge for porous carbons to achieve a volumetric capacitance ( Cv) of over 200 F cm-3 because of the low intrinsic density and limited capacitance. Herein, we propose a pomegranate-like carbon microsphere (PCS) constructed by monodisperse, submicron, N-doped microporous carbon spheres for high-volumetric-capacitance supercapacitors. The assembly of submicron carbon spheres into pomegranate-like structures significantly reduces the required binder amount (2.0 wt %) for electrode preparation, diminishes the interparticle resistance, and most importantly, endows the PCS with a high packing density (0.75 g cm-3). Benefited from the high surface area (1477 m2 g-1), N-doping (3.0 wt %), and high packing density, the PCS demonstrates a high Cv (254 F cm-3), four times that of unassembled monodisperse carbon spheres. This work opens a new avenue to enhance the Cv of porous carbons without compromising the rate capability or cyclability.
RESUMEN
Composites of synthesized reduced graphene oxide (rGO) and titanium dioxide nanotubes (TNTs) were examined and combined at different mass proportions (3:1, 1:1, and 1:3) to develop an electrochemical double layer capacitor (EDLC) nanocomposite. Three different combination methods of synthesis-(1) TNT introduction during GO reduction, (2) rGO introduction during TNT formation, and (3) TNT introduction in rGO sheets using a microwave reactor-were used to produce nanocomposites. Among the three methods, method 3 yielded an EDLC nanomaterial with a highly rectangular cyclic voltammogram and steep electrochemical impedance spectroscopy plot. The specific capacitance for method 3 nanocomposites ranged from 47.26â»165.22 F/g while that for methods 1 and 2 nanocomposites only ranged from 14.03â»73.62 F/g and 41.93â»84.36 F/g, respectively. Furthermore, in all combinations used, the 3:1 graphene/titanium dioxide-based samples consistently yielded the highest specific capacitance. The highest among these nanocomposites is 3:1 rGO/TNT. Characterization of this highly capacitive 3:1 rGO/TNT EDLC composite revealed the dominant presence of partially amorphous rGO as seen in its XRD and SEM with branching crystalline anatase TNTs as seen in its XRD and TEM. Such property showed great potential that is desirable for applications to capacitive deionization and energy storage.
RESUMEN
Dimensional changes in carbon-based supercapacitor electrodes were investigated using a combination of electrochemical dilatometry and in situ small-angle X-ray scattering. A novel hierarchical carbon material with ordered mesoporosity was synthesized, providing the unique possibility to track electrode expansion and shrinkage on the nanometer scale and the macroscopic scale simultaneously. Two carbons with similar mesopore structure but different amounts of micropores were investigated, employing two different aqueous electrolytes. The strain of the electrodes was always positive, but asymmetric with respect to positive and negative applied voltages. The asymmetry strongly increased with increasing microporosity, giving hints to the possible physical origin of electrosorption induced pore swelling.
RESUMEN
Solid polymer electrolyte (SPE) composed of semi-crystalline poly (vinylidene fluoride-hexafluoropropylene) [P(VdF-HFP)] copolymer, 1-ethyl-3-methylimidazolium bis (trifluoromethyl sulphonyl) imide [EMI-BTI] and graphene oxide (GO) was prepared and its performance evaluated. The effects of GO nano-filler were investigated in terms of enhancement in ionic conductivity along with the electrochemical properties of its electrical double layer capacitors (EDLC). The GO-doped SPE shows improvement in ionic conductivity compared to the P(VdF-HFP)-[EMI-BTI] SPE system due to the existence of the abundant oxygen-containing functional group in GO that assists in the improvement of the ion mobility in the polymer matrix. The complexation of the materials in the SPE is confirmed in X-ray diffraction (XRD) and thermogravimetric analysis (TGA) studies. The electrochemical performance of EDLC fabricated with GO-doped SPE is examined using cyclic voltammetry and charge-discharge techniques. The maximum specific capacitance obtained is 29.6 Fâg-1, which is observed at a scan rate of 3 mV/s in 6 wt % GO-doped, SPE-based EDLC. It also has excellent cyclic retention as it is able keep the performance of the EDLC at 94% even after 3000 cycles. These results suggest GO doped SPE plays a significant role in energy storage application.