RESUMEN
Nonradicals are effective in selectively degrading electron-rich organic contaminants, which unfortunately suffer from unsatisfactory yield and uncontrollable composition due to the competitive generation of radicals. Herein, we precisely construct a local microenvironment of the carbon nitride-supported high-loading (~9 wt.%) Fe single-atom catalyst (Fe SAC) with sulfur via a facile supermolecular self-assembly strategy. Short-distance S coordination boosts the peroxymonosulfate (PMS) activation and selectively generates high-valent iron-oxo species (FeIV=O) along with singlet oxygen (1O2), significantly increasing the 1O2 yield, PMS utilization, and p-chlorophenol reactivity by 6.0, 3.0, and 8.4 times, respectively. The composition of nonradicals is controllable by simply changing the S content. In contrast, long-distance S coordination generates both radicals and nonradicals, and could not promote reactivity. Experimental and theoretical analyses suggest that the short-distance S upshifts the d-band center of the Fe atom, i.e., being close to the Fermi level, which changes the binding mode between the Fe atom and O site of PMS to selectively generate 1O2 and FeIV=O with a high yield. The short-distance S-coordinated Fe SAC exhibits excellent application potential in various water matrices. These findings can guide the rational design of robust SACs toward a selective and controllable generation of nonradicals with high yield and PMS utilization.
RESUMEN
Current practices for delivering agrochemicals are inefficient, with only a fraction reaching the intended targets in plants. The surfaces of nanocarriers are functionalized with sucrose, enabling rapid and efficient foliar delivery into the plant phloem, a vascular tissue that transports sugars, signaling molecules, and agrochemicals through the whole plant. The chemical affinity of sucrose molecules to sugar membrane transporters on the phloem cells enhances the uptake of sucrose-coated quantum dots (sucQD) and biocompatible carbon dots with ß-cyclodextrin molecular baskets (suc-ß-CD) that can carry a wide range of agrochemicals. The QD and CD fluorescence emission properties allowed detection and monitoring of rapid translocation (<40 min) in the vasculature of wheat leaves by confocal and epifluorescence microscopy. The suc-ß-CDs more than doubled the delivery of chemical cargoes into the leaf vascular tissue. Inductively coupled plasma mass spectrometry (ICP-MS) analysis showed that the fraction of sucQDs loaded into the phloem and transported to roots is over 6.8 times higher than unmodified QDs. The sucrose coating of nanoparticles approach enables unprecedented targeted delivery to roots with ≈70% of phloem-loaded nanoparticles delivered to roots. The use of plant biorecognition molecules mediated delivery provides an efficient approach for guiding nanocarriers containing agrochemicals to the plant vasculature and whole plants.
Asunto(s)
Plantas , Sacarosa , Transporte Biológico , Plantas/metabolismo , Proteínas de Transporte de Membrana/metabolismo , Agroquímicos , Hojas de la PlantaRESUMEN
Global environmental concern over organic contaminated sites has been progressively conspicuous during the process of urbanization and industrial restructuring. While traditional physical or chemical remediation technologies may significantly destroy the soil structure and function, coupling moderate chemical degradation with microbial remediation becomes a potential way for the green, economic, and efficient remediation of contaminated sites. Hence, this work systematically elucidates why and how to couple chemical technology with microbial remediation, mainly focused on the controllable redox reactions of organic contaminants. The rational design of materials structure, selective generation of reactive oxygen species, and estimation of degradation pathway are described for chemical oxidation. Meanwhile, current progress on efficient and selective reductions of organic contaminants (i.e., dechlorination, defluorination, -NO2 reduction) is introduced. Combined with the microbial remediation of contaminated sites, several consideration factors of how to couple chemical and microbial remediation are proposed based on both fundamental and practical points of view. This review will advance the understanding and development of chemical-microbial coupled remediation for organic contaminated sites.
Asunto(s)
Restauración y Remediación Ambiental , Contaminantes del Suelo , Administración de Residuos , Oxidación-Reducción , Contaminantes del Suelo/análisis , SueloRESUMEN
Co-occurrence of organic contaminants and arsenic oxoanions occurs often at polluted groundwater sites, but the effect of arsenite on the reactivity of sulfidized nanoscale zerovalent iron (SNZVI) used to remediate groundwater has not been evaluated. Here, we study the interaction of arsenite [As(III)] with SNZVI at the individual-particle scale to better understand the impacts on the SNZVI properties and reactivity. Surface and intraparticle accumulation of As was observed on hydrophilic FeS-Fe0 and hydrophobic FeS2-Fe0 particles, respectively. X-ray absorption spectroscopy indicated the presence of realgar-like As-S and elemental As0 species at low and high As/Fe concentration ratios, respectively. Single-particle inductively coupled plasma time-of-flight mass spectrometry analysis identified As-containing particles both with and without Fe. The probability of finding As-containing particles without Fe increased with the S-induced hydrophobicity of SNZVI. The interactions of SNZVI materials with coexisting arsenite inhibited their reactivity with water (â¼5.8-230.7-fold), trichloroethylene (â¼3.6-67.5-fold), and florfenicol (â¼1.1-5.9-fold). However, the overall selectivity toward trichloroethylene and florfenicol relative to water was improved (up to 9.0-fold) because the surface-associated As increased the SNZVI hydrophobicity. These results indicate that reactions of SNZVI with arsenite can remove As from groundwater and improve the properties of SNZVI for dehalogenation selectivity.
Asunto(s)
Arsénico , Arsenitos , Agua Subterránea , Tricloroetileno , Contaminantes Químicos del Agua , Hierro/química , Tricloroetileno/química , Contaminantes Químicos del Agua/química , Agua Subterránea/química , AguaRESUMEN
A lack of mechanistic understanding of nanomaterial interactions with plants and algae cell walls limits the advancement of nanotechnology-based tools for sustainable agriculture. We systematically investigated the influence of nanoparticle charge on the interactions with model cell wall surfaces built with cellulose or pectin and performed a comparative analysis with native cell walls of Arabidopsis plants and green algae (Choleochaete). The high affinity of positively charged carbon dots (CDs) (46.0 ± 3.3 mV, 4.3 ± 1.5 nm) to both model and native cell walls was dominated by the strong ionic bonding between the surface amine groups of CDs and the carboxyl groups of pectin. In contrast, these CDs formed weaker hydrogen bonding with the hydroxyl groups of cellulose model surfaces. The CDs of similar size with negative (-46.2 ± 1.1 mV, 6.6 ± 3.8 nm) or neutral (-8.6 ± 1.3 mV, 4.3 ± 1.9 nm) ζ-potentials exhibited negligible interactions with cell walls. Real-time monitoring of CD interactions with model pectin cell walls indicated higher absorption efficiency (3.4 ± 1.3 10-9) and acoustic mass density (313.3 ± 63.3 ng cm-2) for the positively charged CDs than negative and neutral counterparts (p < 0.001 and p < 0.01, respectively). The surface charge density of the positively charged CDs significantly enhanced these electrostatic interactions with cell walls, pointing to approaches to control nanoparticle binding to plant biosurfaces. Ca2+-induced cross-linking of pectin affected the initial absorption efficiency of the positively charged CD on cell wall surfaces (â¼3.75 times lower) but not the accumulation of the nanoparticles on cell wall surfaces. This study developed model biosurfaces for elucidating fundamental interactions of nanomaterials with cell walls, a main barrier for nanomaterial translocation in plants and algae in the environment, and for the advancement of nanoenabled agriculture with a reduced environmental impact.
Asunto(s)
Arabidopsis , Nanopartículas , Electricidad Estática , Celulosa/metabolismo , Plantas/metabolismo , Arabidopsis/metabolismo , Pectinas/metabolismo , Pared Celular/metabolismoRESUMEN
Lattice engineering of nanomaterials holds promise in simultaneously regulating their geometric and electronic effects to promote their performance. However, local microenvironment engineering of Fe0 nanoparticles (nFe0) for efficient and selective environmental remediation is still in its infancy and lacks deep understanding. Here, we present the design principles and characterization techniques of lattice-doped nFe0 from the point of view of microenvironment chemistry at both atomic and elemental levels, revealing their crystalline structure, electronic effects, and physicochemical properties. We summarize the current knowledge about the impacts of doping nonmetal p-block elements, transition-metal d-block elements, and hybrid elements into nFe0 crystals on their local coordination environment, which largely determines their structure-property-activity relationships. The materials' reactivity-selectivity trade-off can be altered via facile and feasible approaches, e.g., controlling doping elements' amounts, types, and speciation. We also discuss the remaining challenges and future outlooks of using lattice-doped nFe0 materials in real applications. This perspective provides an intuitive interpretation for the rational design of lattice-doped nFe0, which is conducive to real practice for efficient and selective environmental remediation.
Asunto(s)
Restauración y Remediación Ambiental , Nanopartículas , Nanoestructuras , Nanopartículas/químicaRESUMEN
Nanosafety is paramount considering the risks associated with manufactured nanomaterials (MNMs) whose implications could outweigh their advantages for environmental applications. Although nanotechnology-based solutions to implement pollution control, remediation and prevention are incremental with clear benefits for public health and Earth' natural ecosystems, nanoremediation is having a setback due to the risks associated with the safety of MNMs for humans and the environment. MNMs are diverse, work differently and bionano-interactions occurring upon environmental exposure will guide their fate and hazardous outcomes. Here we propose a new ecologically-based design strategy (eco-design) having its roots in green nanoscience and LCA that will ground on an Ecological Risk Assessment approach, which introduces the evaluation of MNMs' ecotoxicity along with their performances and efficacies at the design stage. As such, the proposed eco-design strategy will allow recognition and design-out since the very beginning of material synthesis, those hazardous peculiar features that can be hazardous to living beings and the natural environment. A more ecologically sound eco-design strategy in which nanosafety is conceptually included in MNMs design will sustain safer nanotechnologies including those for the environment as remediation by leveraging any risks for humans and natural ecosystems.
Asunto(s)
Restauración y Remediación Ambiental , Nanoestructuras , Humanos , Ecosistema , Nanoestructuras/toxicidad , Nanotecnología , Contaminación AmbientalRESUMEN
Green self-powered devices based on biodegradable materials have attracted widespread attention. Here, we propose the construction of the transient biotriboelectric nanogenerator (TENG) using green-in-green bionanocompoites. The green-in-green nanocomposites, cellulose nanocrystal (CNC)/polyhydroxybutyrate (PHB), are prepared with a high-pressure molding method. The CNC promotes the degradation and enhances the dielectric constant of CNC/PHB. It further allows for the significant improvement of the triboelectric output of CNC/PHB-based TENG. The voltage output and current output of CNC/PHB-based TENG are 5.7 and 12.5 times higher than those of pristine PHB-based TENG, respectively. Also, the bio-TENG exhibits admirable signal stability in over 20000 cycles. Despite the high hardness of CNC/PHB, a soft but simple-structured arch sensor is successfully assembled using CNC/PHB-based TENG. It can attain the precise real-time monitoring of various human motions. This study may provide new insights into the design/fabrication of green functional materials, and initiate the next wave of innovations in eco-friendly self-powered devices.
RESUMEN
Understanding of nanoplastic prevalence and toxicology is limited by imaging challenges resulting from their small size. Fluorescence microscopy is widely applied to track and identify microplastics in laboratory studies and environmental samples. However, conventional fluorescence microscopy, due to diffraction, lacks the resolution to precisely localize nanoplastics in tissues, distinguish them from free dye, or quantify them in environmental samples. To address these limitations, we developed techniques to label nanoplastics for imaging with stimulated emission depletion (STED) microscopy to achieve resolution at an order of magnitude superior to conventional fluorescence microscopy. These techniques include (1) passive sorption; (2) swell incorporation; and (3) covalent coupling of STED-compatible fluorescence dyes to nanoplastics. We demonstrate that our labeling techniques, combined with STED microscopy, can be used to resolve nanoplastics of different shapes and compositions as small as 50 nm. The longevity of dye labeling is demonstrated in different media and conditions of biological and environmental relevance. We also test STED imaging of nanoplastics in exposure experiments with the model worm Caenorhabditis elegans. Our work shows the value of the method for detection and localization of nanoplastics as small as 50 nm in a whole animal without disruption of the tissue. These techniques will allow more precise localization and quantification of nanoplastics in complex matrices such as biological tissues in exposure studies.
Asunto(s)
Microplásticos , Plásticos , Animales , Caenorhabditis elegans , Microscopía FluorescenteRESUMEN
Surface modification of microscale Fe powder with nitrogen has emerged recently to improve the reactivity of Fe0 for dechlorination. However, it is unclear how an even incorporation of a crystalline iron nitride phase into Fe0 nanoparticles affects their physicochemical properties and performance, or if Fe0 nanoparticles with a varied nitridation degree will act differently. Here, we synthesized nitridated Fe0 nanoparticles with an even distribution of N via a sol-gel and pyrolysis method. Nitridation expanded the Fe0 lattice and provided the Fe4N species, making the materials more hydrophobic and accelerating the electron transfer, compared to un-nitridated Fe0. These properties well explain their reactivity and selectivity toward trichloroethylene (TCE). The TCE degradation rate by nitridated Fe0 (up to 4.8 × 10-2 L m-2 h-1) was much higher (up to 27-fold) than that by un-nitridated Fe0, depending on the nitridation degree. The materials maintained a high electron efficiency (87-95%) due to the greatly suppressed water reactivity (109-127 times lower than un-nitridated Fe0). Acetylene was accumulated as the major product of TCE dechlorination via ß-elimination. These findings suggest that the nitridation of Fe0 nanoparticles can change the materials' physicochemical properties, providing high reactivity and selectivity toward chlorinated contaminants for in situ groundwater remediation.
Asunto(s)
Agua Subterránea , Nanopartículas , Tricloroetileno , Contaminantes Químicos del Agua , Agua Subterránea/química , Hierro/química , Nitrógeno , Tricloroetileno/química , Contaminantes Químicos del Agua/químicaRESUMEN
Metal-organic frameworks (MOFs) have potential applications in removing pollutants such as heavy metals, oils, and toxins from water. However, due to the intrinsic fragility of MOFs and their fine powder form, there are still technical barriers to their practical application such as blockage of pipes, difficulty in recovery, and potential environmental toxicity. Therefore, attention has focused on approaches to convert nanocrystalline MOFs into macroscopic materials to overcome these limitations. Recently, strategies for shaping MOFs into beads (0D), nanofibers (1D), membranes (2D), and gels/sponges (3D) with macrostructures are developed including direct mixing, in situ growth, or deposition of MOFs with polymers, cotton, foams or other porous substrates. In this review, successful strategies for the fabrication of macroscopic materials from MOFs and their applications in removing pollutants from water including adsorption, separation, and advanced oxidation processes, are discussed. The relationship between the macroscopic performance and the microstructure of materials, and how the range of 0D to 3D macroscopic materials can be used for water treatment are also outlined.
Asunto(s)
Contaminantes Ambientales , Estructuras Metalorgánicas , Metales Pesados , Purificación del Agua , Adsorción , Estructuras Metalorgánicas/química , Metales Pesados/químicaRESUMEN
The bioaccumulation and depuration of TiO2 nanoparticles (TiO2NPs) by zebrafish via the dietary exposure following the OECD Test Guideline 305 (OECD TG305) was evaluated using particle size- and number concentration-resolved analysis based on single-particle ICP-MS (spICP-MS). We found that using enzymatic digestion without H2O2 or excessive heating can recover 84.0 ± 4.0% and 94.5 ± 3.5% of TiO2NP mass and number concentrations from fish tissue, respectively, without altering the size distribution of parent TiO2NPs. OECD TG305 can allow for the evaluation of bioaccumulation and depuration of TiO2NPs by fish based on the particle mass and number dose metrics. The toxicokinetic modeling can reasonably describe the mass- and number-based measurement data with the derived absorption efficiency α at ~0.2, depuration rate at ~0.5 d-1, and kinetic biomagnification factor (BMFk) at ~0.007 comparable with available data. The mass concentration- and number concentration-based bioaccumulation metrics including body burdens are correlated for TiO2NPs that remained nano-sized in vivo and exhibited marginal physicochemical alterations upon uptake by fish. The result indicates that the traditional mass concentration metric may be used to represent the fish bioaccumulation potential for chemically inert NPs like TiO2.
Asunto(s)
Nanopartículas , Pez Cebra , Animales , Bioacumulación , Peróxido de Hidrógeno , TitanioRESUMEN
Groundwater contamination by halogenated organic compounds, especially fluorinated ones, threatens freshwater sources globally. Sulfidized nanoscale zero-valent iron (SNZVI), which is demonstrably effective for dechlorination of groundwater contaminants, has not been well explored for defluorination. Here, we show that SNZVI nanoparticles synthesized via a modified post-sulfidation method provide rapid dechlorination (â¼1100 µmol m-2 day-1) and relatively fast defluorination (â¼6 µmol m-2 day-1) of a halogenated emerging contaminant (florfenicol) under ambient conditions, the fastest rates that have ever been reported for Fe0-based technologies. Batch reactivity experiments, material characterizations, and theoretical calculations indicate that coating S onto the metallic Fe surface provides a highly chemically reactive surface and changes the primary dechlorination pathway from atomic H for nanoscale zero-valent iron (NZVI) to electron transfer for SNZVI. S and Fe sites are responsible for the direct electron transfer and atomic H-mediated reaction, respectively, and ß-elimination is the primary defluorination pathway. Notably, the Cl atoms in florfenicol make the surface more chemically reactive for defluorination, either by increasing florfenicol adsorption or by electronic effects. The defluorination rate by SNZVI is â¼132-222 times higher with chlorine attached compared to the absence of chlorine in the molecule. These mechanistic insights could lead to new SNZVI materials for in situ groundwater remediation of fluorinated contaminants.
Asunto(s)
Agua Subterránea , Tricloroetileno , Contaminantes Químicos del Agua , Hierro , Azufre , Tianfenicol/análogos & derivados , AguaRESUMEN
The empirical necessity for integrating informatics throughout the experimental process has become a focal point of the nano-community as we work in parallel to converge efforts for making nano-data reproducible and accessible. The NanoInformatics Knowledge Commons (NIKC) Database was designed to capture the complex relationship between nanomaterials and their environments over time in the concept of an 'Instance'. Our Instance Organizational Structure (IOS) was built to record metadata on nanomaterial transformations in an organizational structure permitting readily accessible data for broader scientific inquiry. By transforming published and on-going data into the IOS we are able to tell the full transformational journey of a nanomaterial within its experimental life cycle. The IOS structure has prepared curated data to be fully analyzed to uncover relationships between observable phenomenon and medium or nanomaterial characteristics. Essential to building the NIKC database and associated applications was incorporating the researcher's needs into every level of development. We started by centering the research question, the query, and the necessary data needed to support the question and query. The process used to create nanoinformatic tools informs usability and analytical capability. In this paper we present the NIKC database, our developmental process, and its curated contents. We also present the Collaboration Tool which was built to foster building new collaboration teams. Through these efforts we aim to: 1) elucidate the general principles that determine nanomaterial behavior in the environment; 2) identify metadata necessary to predict exposure potential and bio-uptake; and 3) identify key characterization assays that predict outcomes of interest.
Asunto(s)
Nanoestructuras , Bases de Datos Factuales , Metadatos , Nanoestructuras/químicaRESUMEN
Zinc (Zn2+) and cadmium (Cd2+) in water pose serious threats to human health and the environment. In search for a more effective treatment technology, we prepared a type of carboxymethyl cellulose (CMC) bridged chlorapatite (CMC-CAP) nanoparticles and tested the material for removal of Zn2+ and Cd2+ from water. CMC macromolecules were attached to CAP by bidentate bridging and hydrogen bonding, preserving the high adsorption capacity of CAP nanoparticles while allowing for easy gravity-separation of the nanoparticles. CMC-CAP showed rapid adsorption kinetics and 22.8% and 11.2% higher equilibrium uptake for Zn2+ and Cd2+, respectively, than pristine CAP. An extended dual-mode isotherm model, which takes into account both sorption and chemical precipitation, provided the best fits to the sorption isotherms, giving a maximum Langmuir sorption capacity of 141.1 mg g-1 for Zn2+ and 150.2 mg g-1 for Cd2+ by CMC-CAP. Na+ at up to 5 mM showed modest effects on the uptake of the heavy metals, while 2-5 mM of Ca2+ exerted notable inhibitive effects. Dissolved organic matter (up to 5 mg L-1 as TOC) inhibited the Zn2+ uptake by 16.5% but enhanced the Cd2+ removal by 8.6%. Material characterizations and surface binding analyses revealed that ion exchange, surface precipitation, and surface complexation were the removal mechanisms for the heavy metals. This study demonstrates stabilizer bridging may serve as a convenient strategy to facilitate water treatment uses of nanoparticles.
Asunto(s)
Metales Pesados , Nanopartículas , Contaminantes Químicos del Agua , Purificación del Agua , Adsorción , Apatitas , Cadmio/análisis , Carboximetilcelulosa de Sodio , Humanos , Agua , Contaminantes Químicos del Agua/análisis , Zinc/análisisRESUMEN
Sulfidized nanoscale zerovalent iron (SNZVI) is a promising material for groundwater remediation. However, the relationships between sulfur content and speciation and the properties of SNZVI materials are unknown, preventing rational design. Here, the effects of sulfur on the crystalline structure, hydrophobicity, sulfur speciation, corrosion potential, and electron transfer resistance are determined. Sulfur incorporation extended the nano-Fe0 BCC lattice parameter, reduced the Fe local vacancies, and lowered the resistance to electron transfer. Impacts of the main sulfur species (FeS and FeS2 ) on hydrophobicity (water contact angles) are consistent with density functional theory calculations for these FeSx phases. These properties well explain the reactivity and selectivity of SNZVI during the reductive dechlorination of trichloroethylene (TCE), a hydrophobic groundwater contaminant. Controlling the amount and speciation of sulfur in the SNZVI made it highly reactive (up to 0.41 L m-2 d-1 ) and selective for TCE degradation over water (up to 240 moles TCE per mole H2 O), with an electron efficiency of up to 70%, and these values are 54-fold, 98-fold, and 160-fold higher than for NZVI, respectively. These findings can guide the rational design of robust SNZVI with properties tailored for specific application scenarios.
RESUMEN
Near-infrared (nIR) fluorescent single-walled carbon nanotubes (SWCNTs) were designed and interfaced with leaves of Arabidopsis thaliana plants to report hydrogen peroxide (H2O2), a key signaling molecule associated with the onset of plant stress. The sensor nIR fluorescence response (>900 nm) is quenched by H2O2 with selectivity against other stress-associated signaling molecules and within the plant physiological range (10-100 H2O2 µM). In vivo remote nIR imaging of H2O2 sensors enabled optical monitoring of plant health in response to stresses including UV-B light (-11%), high light (-6%), and a pathogen-related peptide (flg22) (-10%), but not mechanical leaf wounding (<3%). The sensor's high biocompatibility was reflected on similar leaf cell death (<5%) and photosynthetic rates to controls without SWCNT. These optical nanosensors report early signs of stress and will improve our understanding of plant stress communication, provide novel tools for precision agriculture, and optimize the use of agrochemicals in the environment.
Asunto(s)
Arabidopsis/metabolismo , Técnicas Biosensibles/métodos , Peróxido de Hidrógeno/metabolismo , Aptámeros de Nucleótidos/química , Arabidopsis/química , Colorantes Fluorescentes/química , Peróxido de Hidrógeno/análisis , Nanotubos de Carbono/química , Imagen Óptica/métodos , Hojas de la Planta/química , Hojas de la Planta/metabolismo , Estrés FisiológicoRESUMEN
Development of spinel oxides as low-cost and high-efficiency catalysts is highly desirable; however, rational synthesis of efficient and stable spinel systems with precisely controlled structure and components remains challenging. We demonstrate the design of complex nanostructured cobalt-based bimetallic spinel catalysts for low-temperature CO oxidation by a simple template-free method. The self-assembled multi-shelled mesoporous spinel nanostructures provide high surface area (203.5 m2/g) and favorable unique surface chemistry for producing abundant active sites and lead to the creation of robust microsphere configured by 16-nm spinel nanosheets, which achieve satisfactory water-resisting property and catalytic activity. Theoretical models show that O vacancies at exposed {110} facets in cubic spinel phase guarantee the strong adsorption of reactive oxygen species on the surface of catalysts and play a key role in the prevention of deactivation under moisture-rich conditions. The design concept with architecture and composition control can be extended to other mixed transition metal oxide compositions.
RESUMEN
Designing large-area flexible transparent smart windows for high-efficiency indoor fine particulate matter (PM2.5) capture is important to guarantee safe indoor environments. In this article, we demonstrate that large-area fabrication of flexible transparent Ag-nylon mesh can be performed not only to turn the indoor light illumination intensity as thermochromic smart windows after uniformly coating with thermochromic dye but also to purify indoor air as high-efficiency PM2.5 filter. It takes only about $15.03 and 20 min to fabricate 7.5-m2 Ag-nylon flexible transparent windows without any modification with a sheet resistance of as low as 8.87 Ω sq-1 and optical transmittance of 86.05%. As an excellent PM filter (can be recycled after PM filtration), the removal efficiency is as high as 99.65% and the processing speed is high, which can reduce the PM2.5 density from heavily polluted (248 µg·m-3, purple alert) to good (32.9 µg·m-3, green statement) in 50 s.
RESUMEN
Due to the extreme rise of sludge pollution with heavy metals (e.g. copper), the options for its disposal or treatment are decreasing. On the contrary, properly heavy metal-cleaned sludge can be used as an alternative sustainable energy and agriculture source. The aim of this study was to develop a novel nanoadsorbent, based on irreversibly linked amino-rich polymer onto previously silica-coated magnetic nanoparticles (MNPs) that can be applied efficiently for metal removal. MNPs were coated uniformly by 3 nm thick silica layer (core-shell structure), and were additionally modified with systematic covalent attachment of derived branched polyethyleneimine (bPEI). The formed structure of synthesized MNPs composite was confirmed with several analytical techniques. Importantly, nanoadsorbents exhibit high density of chelating amino groups and large magnetic force for easier separation. The importance of introduced bPEI, effect of pH, initial heavy metal concentration onto copper uptake efficiency and, further, nanoadsorbent regeneration, were studied and explained in detail. The adsorption isotherm was well fitted with Langmuir model, and the maximum adsorption capacity was shown to be 143 mg·g¹ for Cu2+. The reusability and superior properties of silica-coated MNPs functionalized with derived-bPEI for copper adsorption underlie its potential for the removal application from heavy metals contaminated sludge.