Maximizing the notional area in single tip field emitters.

One of the critical aspects in advancing high-brightness field emitter devices is determining the conditions under which single-tip emitters should be constructed to optimize their emission area. Recent experiments have explored varying the axis ratio ξ of the cap of a single-tip emitter, ranging from an oblate semi-spheroid to a prolate shape, mounted on a nearly cylindrical conducting body. In this work, we present a strategy, based on high-accuracy computer simulations using the finite element technique, to maximize the emission area of those single-tip emitters. Importantly, our findings indicate that the notional emission area achieves its maximum when the emitter's cap is adjusted to an oblate semi-spheroid with a characteristic axis ratio ξC≈0.85. We do a comparison of notional emission area as a function of ξ for an ellipsoidal emitter on a post and compare these results from other emitter configurations, which are feasible to fabricate.

Highly Efficient Ultraviolet Third-Harmonic Generation in an Isolated Thin Si Meta-Structure.

Nonlinear nanophotonic devices have shown great potential for on-chip information processing, quantum source, 3D microfabrication, greatly promoting the developments of integrated optics, quantum science, nanoscience and technologies, etc. To promote the applications of nonlinear nanodevices, improving the nonlinear efficiency, expanding the spectra region of nonlinear response and reducing device thickness are three key issues. Herein, this study focuses on the nonlinear effect of third-harmonic generation (THG), and present a thin Si meta-sructure to improve the THG efficiency in the ultraviolet (UV) region. The measured THG efficiency is up to 10-5 at an emission wavelength of 309 nm. Also, the THG nanosystem is only 100 nm in thickness, which is two-five times thinner than previous all-dielectric nanosystems applied in THG studies. These findings not only present a powerful thin meta-structure with highly efficient THG emission in UV region, but also provide a constructive avenue for further understanding the light-matter interactions at subwavelength scales, guiding the design and fabricating of advanced photonic devices in future.

Plasmon-Free Surface-Enhanced Raman Spectroscopy Using α-Type MoO3 Semiconductor Nanorods with Strong Light Scattering in the Visible Regime.

Recent developments in semiconductor-based surface-enhanced Raman scattering (SERS) have achieved numerous advancements, primarily centered on the chemical mechanism. However, the role of the electromagnetic (electromagnetic mechanism) contribution in advancing semiconductor SERS substrates is still underexplored. In this study, we developed a SERS substrate based on densely aligned α-type MoO3 (α-MoO3) semiconductor nanorods (NRs) with rectangular parallelepiped ribbon shapes with width measuring several hundred nanometers. These structural attributes strongly affect light transport in the visible range by multiple light scattering generated in narrow gaps between NRs, contributing to the improvement of SERS performance. Engineering the nanostructure and chemical composition of NRs realized high SERS sensitivity with an enhancement factor of 2 × 108 and a low detection limit of 5 × 10-9 M for rhodamine 6G (R6G) molecules, which was achieved by the stoichiometric NR sample with strong light scattering. Furthermore, it was observed that the scattering length becomes significantly shorter compared with the excitation wavelength in the visible regime, which indicates that light transport is strongly modified by mesoscopic interference related to Anderson localization. Additionally, high electric fields were found to be localized on the NR surfaces, depending on the excitation wavelength, similar to the SERS response. These optical phenomena indicate that electromagnetic excitation processes play an important role in plasmon-free SERS platforms based on α-MoO3 NRs. We postulate that our study provides important guidance for designing effective EM-based SERS-active semiconductor substrates.

A Gold Needle Tip Array Ultrafast Electron Source with High Beam Quality.

Electron sources are crucial elements in diverse applications such as electron microscopes, synchrotrons, and free-electron lasers. Nanometer-sharp needle tips are electron emitters with the highest beam quality, yet for a single needle the current is limited. Combining the emission of multiple needles promises large current yields while preserving the individual emitters' favorable properties. We present an ultrafast electron source consisting of a lithographically fabricated array of sharp gold tips illuminated with 25 fs laser pulses. The source provides up to 2000 electrons per pulse for moderate laser peak intensities of 1011 W/cm2 and a narrow energy width of 0.5 ± 0.05 eV at low current. The electron beam has a well-behaved Gaussian profile and is highly collimated, yielding a small normalized emittance on the order of nm·rad. These properties are well suited for applications requiring both high current and spatial resolution, such as free-electron light sources and chip-based particle accelerators.

Intra-nanoparticle plasmonic nanogap based spatial-confinement SERS analysis of polypeptides.

Sensing and characterizing water-soluble polypeptides are essential in various biological applications. However, detecting polypeptides using Surface-Enhanced Raman Scattering (SERS) remains a challenge due to the dominance of aromatic amino acid residues and backbones in the signal, which hinders the detection of non-aromatic amino acid residues. Herein, intra-nanoparticle plasmonic nanogap were designed by etching the Ag shell in Au@AgNPs (i.e., obtaining AuAg cores) with chlorauric acid under mild conditions, at the same time forming the outermost Au shell and the void between the AuAg cores and the Au shell (AuAg@void@Au). By varying the Ag to added chloroauric acid molar ratios, we pioneered a simple, controllable, and general synthetic strategy to form interlayer-free nanoparticles with tunable Au shell thickness, achieving precise regulation of electric field enhancement within the intra-nanogap. As validation, two polypeptide molecules, bacitracin and insulin B, were successfully synchronously encapsulated and spatial-confined in the intra-nanogap for sensing. Compared with concentrated 50 nm AuNPs and Au@AgNPs as SERS substrates, our simultaneous detection method improved the sensitivity of the assay while benefiting to obtain more comprehensive characteristic peaks of polypeptides. The synthetic strategy of confining analytes while fabricating plasmonic nanostructures enables the diffusion of target molecules into the nanogap in a highly specific and sensitive manner, providing the majority of the functionality required to achieve peptide detection or sequencing without the hassle of labeling.

Optimizing the Endoscopic Transorbital Approach: MacCarty Keyhole for Enhanced Surgical Exposure in the Opticocarotid Region.

BACKGROUND: In recent years, the endoscopic transorbital (TO) approach has gained increasing interest for the treatment of middle cranial fossa lesions. We propose a technical refinement to the conventional superior eyelid TO approach, which improves the surgical exposure and augments the working angles when targeting the opticocarotid region. METHODS: Four embalmed adult cadaveric specimens (8 sides) were dissected at the Laboratory of Surgical Neuroanatomy of our institution. A TO approach was performed, with removal of the anterior clinoid process and the lateral orbital rim. Subsequently, the MacCarty keyhole was drilled in the superolateral orbital wall. Given that the lesser sphenoid wing was already drilled in the conventional TO craniectomy, the opening of the keyhole was essentially a lateral extension of the craniectomy. RESULTS: The procedure was successfully conducted in all 4 orbits. Clinoidectomy was performed either before or after extending the craniectomy to the MacCarty point. Extending the craniectomy made anterior clinoidectomy easier, by increasing the surgical exposure, and allowing a more lateral entrance for the endoscope. The extension also facilitated frontal lobe retraction, and it facilitated the optic nerve and carotid artery manipulation. Postoperative computed tomography scans showed a minimal 10-mm craniectomy extension, which remained covered by the temporal muscle after reconstruction. CONCLUSIONS: The modified endoscopic TO approach with the extension of the craniectomy to MacCarty point improves surgical access and visualization of the opticocarotid region. This facilitates anterior clinoidectomy and optic nerve decompression. Although it implies judicious instrument manipulation and a larger incision size, further studies can define its potential benefits.

Vapor phase detection of explosives by surface enhanced Raman scattering under ambient conditions with metal nanogap structures.

Non-invasive and passive detection of explosives in the vapor phase is advantageous for military, counter-terrorism, and homeland security applications. Detection of explosives using SERS has been an active research topic. However, the vapor pressures of most explosives are low at room temperature, and consequently, the vapor phase detection by SERS is highly challenging without intentionally heating explosive powder to increase the vapor pressure. In this work, we report the rapid and sensitive detection of 2,4,6-trinitrotoluene (TNT) and 2,4-dinitrotoluene (2,4-DNT) in the vapor phase, using a gold nanogap (AuNG) SERS substrate. The AuNG SERS substrate was fabricated with electron beam evaporation, rapid thermal annealing, and wet etching. SERS measurements were carried out with an incident power as low as 0.56 mW at 785 nm. To prevent the condensation effect, the TNT and 2,4-DNT powders inside the cuvette were taken out before inserting the nanogap substrate. Our SERS results demonstrate the feasibility of the non-invasive detection of vapor phase explosives under ambient conditions.

Probing Temperature-Induced Plasmonic Nonlinearity: Unveiling Opto-Thermal Effects on Light Absorption and Near-Field Enhancement.

Precise measurement and control of local heating in plasmonic nanostructures are vital for diverse nanophotonic devices. Despite significant efforts, challenges in understanding temperature-induced plasmonic nonlinearity persist, particularly in light absorption and near-field enhancement due to the absence of suitable measurement techniques. This study presents an approach allowing simultaneous measurements of light absorption and near-field enhancement through angle-resolved near-field scanning optical microscopy with iterative opto-thermal analysis. We revealed gold thin films exhibit sublinear nonlinearity in near-field enhancement due to nonlinear opto-thermal effects, while light absorption shows both sublinear and superlinear behaviors at varying thicknesses. These observations align with predictions from a simple harmonic oscillation model, in which changes in damping parameters affect light absorption and field enhancement differently. The sensitivity of our method was experimentally examined by measuring the opto-thermal responses of three-dimensional nanostructure arrays. Our findings have direct implications for advancing plasmonic applications, including photocatalysis, photovoltaics, photothermal effects, and surface-enhanced Raman spectroscopy.

Intervalley Scattering Induced Terahertz Field Enhancement in Graphene Metasurface.

Terahertz (THz) field enhancement has significant applications in high-resolution imaging, next-generation wireless communications, and networking. In this work, we experimentally demonstrate a graphene metasurface for THz field enhancement that is based on the intervalley scattering theory. Each meta-atom of the metasurface is composed of one split-ring resonator (SRR) embedded in one graphene patch. The experimental results show that, by electrically adjusting the conductivity of the graphene patch, the THz field through the entire sample is enhanced by 23 times and the transmission amplitude at 0.47 THz decreases 8.4 dB. Moreover, the maximum phase difference at 0.43 THz reaches 88°. The experiment shows good agreement with simulation. This study paves a way for exploring THz-matter interactions and nonlinear optics.

The Influence of Substrate on the Optical Properties of Gold Nanoslits.

Nanoslits have various applications, including localized surface plasmon resonance (LSPR)-based nanodevices, optical biosensors, superfocusing, high-efficiency refractive index sensors and chip-based protein detection. In this study, the effect of substrates on the optical properties of gold nanoslits placed in free space is discussed; for this purpose, glass BK7 and Al2O3 are used as substrates and the wavelength of incident light is supposed to be 650 nm. The optical properties, power flow and electric field enhancement for gold nanoslits are investigated by using the finite element method (FEM) in COMSOL Multiphysics software. The effect of polarization of an incident electromagnetic wave as it propagates from a gold nanoslit is also analyzed. As special case, the effect of glass and alumina substrate on magnetic field, power flow and electric field enhancement is discussed. The goal of this research is to investigate the phenomenon of power flow and electric field enhancement. The study of power flow in gold nanoslits provides valuable insights into the behavior of light at the nanoscale and offers opportunities for developing novel applications in the field of nanophotonics and plasmonics. The consequences of this study show the significance of gold nanoslits as optical nanosensors.

Mirror-Enhanced Plasmonic Nanoaperture for Ultrahigh Optical Force Generation with Minimal Heat Generation.

Double Nanohole Plasmonic Tweezers (DNH) have emerged as a powerful approach for confining light to sub-wavelength volume, enabling the trapping of nanoscale particles much smaller than the wavelength of light. However, to circumvent plasmonic heating effects, DNH tweezers are typically operated off-resonance, resulting in reduced optical forces and field enhancements. In this study, we introduce a novel DNH design with a reflector layer, enabling on-resonance illumination while minimizing plasmonic heating. This design efficiently dissipates heat and redistributes the electromagnetic hotspots, making them more accessible for trapping nanoscale particles and enhancing light-matter interactions. We also demonstrate low-power trapping and release of small extracellular vesicles. Our work opens new possibilities for trapping-assisted Surface Enhanced Raman Spectroscopy (SERS), plasmon-enhanced imaging, and single photon emission applications that demand strong light-matter interactions.

Enhanced Near-Infrared Ultra-Narrow Absorber Based on a Dielectric Nano-Resonant Ring for Refractive Index Sensing.

In this paper, a plasmon resonance-enhanced narrow-band absorber based on the nano-resonant ring array of transparent conductive oxides (TCOs) is proposed and verified numerically. Due to the unique properties of TCOs, the structure achieves an ultra-narrowband perfect absorption by exhibiting a near-field enhancement effect. Consequently, we achieve a peak absorption rate of 99.94% at 792.2 nm. The simulation results indicate that the Full Width Half Maximum (FWHM) can be limited to within 8.8 nm. As a refractive index sensor, the device reaches a sensitivity S of 300 nm/RIU and a Figure of Merit (FOM) value of 34.1 1/RIU. By analyzing the distribution characteristics of the electromagnetic field at the 792.2 nm, we find high absorption with a narrow FWHM of the ITO nano-resonant ring (INRR) owing to plasmon resonance excited by the free carriers at the interface between the metal and the interior of the ITO. Additionally, the device exhibits polarization independence and maintains absorption rates above 90% even when the incident formed by the axis perpendicular to the film is greater than 13°. This study opens a new prospective channel for research into TCOs, which will increase the potential of compact photoelectric devices, such as optical sensing, narrowband filtering, non-radiative data transmission and biomolecular manipulation.

Dual-Dewetting Process for Self-Assembled Nanoparticle Clusters in Wafer Scale.

Plasmonic molecules, which are geometrically well-defined plasmonic metal nanoparticle clusters, have attracted significant attention due to their enhancement of light-matter interactions owing to a stronger electric field enhancement than that by single particles. High-resolution lithography techniques provide precise positioning of plasmonic nanoparticles, but their fabrication costs are excessively high. In this study, we propose a lithography-free, self-assembly fabrication method, termed the dual-dewetting process, which allows the control of the size and density of gold nanoparticles. This process involves depositing a gold thin film on a substrate and inducing dewetting through thermal annealing, followed by a second deposition and annealing. The method achieves a uniform distribution of particle size and density, along with increased particle density, across a 6-inch wafer. The superiority of the method is confirmed by a 30-fold increase in the signal intensity of surface-enhanced Raman scattering following the additional dewetting with an 8 nm film, compared to single dewetting alone. Our findings indicate that the dual-dewetting method provides a simple and efficient approach to enable a variety of plasmonic applications through efficient plasmonic molecule large-area fabrication.

Anapole-Assisted Low-Power Optical Trapping of Nanoscale Extracellular Vesicles and Particles.

This study addresses the challenge of trapping nanoscale biological particles using optical tweezers without the photothermal heating effect and the limitation presented by the diffraction limit. Optical tweezers are effective for trapping microscopic biological objects but not for nanoscale specimens due to the diffraction limit. To overcome this, we present an approach that uses optical anapole states in all-dielectric nanoantenna systems on distributed Bragg reflector substrates to generate strong optical gradient force and potential on nanoscale biological objects with negligible temperature rise below 1 K. The anapole antenna condenses the accessible electromagnetic energy to scales as small as 30 nm. Using this approach, we successfully trapped nanosized extracellular vesicles and supermeres (approximately 25 nm in size) using low laser power of only 10.8 mW. This nanoscale optical trapping platform has great potential for single molecule analysis while precluding photothermal degradation.

Highly Localized Optical Field Enhancement at Neon Ion Sputtered Tungsten Nanotips.

We present laser-driven rescattering of electrons at a nanometric protrusion (nanotip), which is fabricated with an in situ neon ion sputtering technique applied to a tungsten needle tip. Electron energy spectra obtained before and after the sputtering show rescattering features, such as a plateau and high-energy cutoff. Extracting the optical near-field enhancement in both cases, we observe a strong increase of more than 2-fold for the nanotip. Accompanying finite-difference time-domain (FDTD) simulations show a good match with the experimentally extracted near-field strengths. Additionally, high electric field localization for the nanotip is found. The combination of transmission electron microscope imaging of such nanotips and the determination of the near-field enhancement by electron rescattering represent a full characterization of the electric near-field of these intriguing electron emitters. Ultimately, nanotips as small as single nanometers can be produced, which is of utmost interest for electron diffraction experiments and low-emittance electron sources.

Dynamic Trapping and Manipulation of Self-Assembled Ag Nanoplates as Efficient Plasmonic Tweezers.

Plasmonic tweezers based on periodic nanostructures have been used to manipulate particles through multiple and uniform local surface plasmon (LSP) fields. However, the coverage area of periodic nanostructures is limited, which restricts the range of trapping and manipulation. In this paper, we present a novel approach to achieve large-scale manipulation and trapping of microspheres by uniformly coupled LSP fields on a short-range disordered self-assembled Ag nanoplates (DSNP) film. The DSNP film is prepared by simple and low-cost methods─chemical growth and self-assembly technique, which overcome the challenges of preparing periodic nanostructures with a large coverage area. The uniform and coupled plasmon fields generated by this film provide enhanced electrodynamic interactions with particles, enabling the non-invasive and repeatable trapping of particles in solution. Utilizing sensitive LSPRs, dynamic manipulating particles was achieved by controlling the laser position. This large-scale platform of stable manipulation enabled by the DSNP film opens up new possibilities for the trapping and manipulation of nanoparticles in a variety of applications.

Enhancement of Raman signal of monolayer graphene films using a single optical microsphere-assisted Raman microscopic technique.

For the first time, we report the enhancement of the Raman scattering signal of monolayer graphene films (MGFs) on Cu foils using a single optical microsphere-assisted Raman microscopic (SOMRM) technique. Initially, the Raman scattering spectra of MGF on Cu foil are recorded using the conventional Raman microscopic (CRM) technique, where the excitation laser is directly focused on the MGFs with the help of a different microscopic objective lens. The obtained spectra are observed to consist of only the low-intensity G and 2D bands but not the D band, known as the disorder or defect band. However, the intensity of all three bands is enhanced significantly using the SOMRM technique. Finally, the numerical investigation is performed on the SOMRM technique to understand the origin of the enhancement of the Raman scattering signal of MGF on the Cu substrates. The role of the substrate for MGF and the radius of the microsphere on the enhancement of the Raman scattering signal of MGFs is also investigated numerically in detail.

Optimally Configured Optical Fiber Near-Field Enhanced Plasmonic Resonance Immunoprobe for the Detection of Alpha-Fetoprotein.

The detection of trace biomarkers is an important supplementary approach for early screening and diagnoses of tumors. An optical fiber near-field enhanced plasmonic resonance immunoprobe is developed for the detection of the hepatocellular carcinoma biomarker, i.e., the alpha-fetoprotein. Generic principles based on dispersion models and finite element analysis (FEA) models are developed to realize the optimized configuration of spectral characteristics of the immunoprobe. Dispersion models provide theoretical guidance for the design of the multilayer sensing structure from the perspective of the ray optics theory. FEA models provide theoretical guidance for the selection of coating materials from the perspective of the self-defined dielectric constant ratio, i.e., the ratio of the real part to the imaginary part. The optimized configuration of the antibody coupling further improves the biosensing performance of the immunoprobe. The limit of detection (LOD) can reach down to 0.01 ng mL-1 , which is one order of magnitude lower than those relevant reported works. Such a low LOD can more effectively avoid the accuracy degradation of detection results due to measurement errors. Human serum samples have also been detected, with the good precision achieved. This work shows promising prospects in applications of label-free, low-cost, rapid, and convenient early screening of tumors.

Surface plasmon field enhanced upconversion luminescence for the screening and detection of phenolic environmental estrogens.

The endocrine system's interference caused by environmental estrogens (EEs) residue in food is a topic of public concern. Here, we construct an aptasensor for the sensitive detection of EEs based on luminescence resonance energy transfer (LRET). With MoS2 nanosheets acting as the energy acceptor and upconversion luminescence nanoparticles@gold nanoparticles (UCNPs@Au) as the luminescence donor, autofluorescence from food is prevented from interfering. The in-situ deposition of AuNPs not only induces local field enhancement to significantly increase the luminescence intensity of UCNPs, but also conduces to the modification of aptamer through Au-S bond. This aptasensor can respond to multiple estrogens thanks to the choice of a universal aptamer that recognizes phenolic hydroxyl group, and it offers the probability to screen unidentified phenolic estrogens. This method has a high sensitivity and a low limit of detection (LOD), and the satisfactory recovery rates acquired from water and milk samples confirmed its considerable application value.

Enhancement of Amplified Spontaneous Emission by Electric Field in CsPbBr3 Perovskites.

Perovskite gain materials can sustain continuous-wave lasing at room-temperature. A first step toward the unachieved goal of electrically excited lasing would be an improvement in gain when electrical stimulation is added to the optical. However, to date, electrical stimulation supplementing optical has reduced gain performance. We find that amplified spontaneous emission (ASE) in a CsPbBr3 perovskite light-emitting diode (LED) held under invariant subthreshold optical excitation can be turned on/off by the addition/removal of an electric field. A positive bias voltage leads to a factor of 3 reduction in the optical ASE threshold, the cause of which can be attributed to an enhancement of the radiative rate. The slow components (10 s time scale) of the modulation in the photoluminescence and ASE when the voltage is changed suggest that the relocation of mobile ions trigger the increased radiative rate and observed lowering of ASE thresholds.