RESUMEN
In this paper, the ballistic performance of a multilayered composite inspired by the structural characteristics of nacre is numerically investigated using finite element (FE) simulations. Nacre is a natural composite material found in the shells of some marine mollusks, which has remarkable toughness due to its hierarchical layered structure. The bioinspired nacre-like composites investigated here were made of five wavy aluminum alloy 7075-T651 (AA7075) layers composed of ~1.1-mm thick square tablets bonded together with toughened epoxy resin. Two composite configurations with continuous layers (either wavy or flat) were also studied. The ballistic performance of the composite plates was compared to that of a bulk monolithic AA7075 plate. The ballistic impact was simulated in the 300-600 m/s range using two types of spherical projectiles, i.e., rigid and elastoplastic. The results showed that the nacre plate exhibited improved ballistic performance compared to the bulk plate and the plates with continuous layers. The structural design of the nacre plate improved the ballistic performance by producing a more ductile failure and enabling localized energy absorption via the plastic deformation of the tablets and the globalized energy dissipation due to interface debonding and friction. All the plate configurations exhibited a better ballistic performance when impacted by an elastoplastic projectile compared to a rigid one, which is explained by the projectile plastic deformation absorbing some of the impact energy and the enlarged contact area between the projectile and the plates producing more energy absorption by the plates.
RESUMEN
It is well known that the use of continuous reinforcing fibers can largely improve the typical low in-plane mechanical properties of 3D-printed parts. However, there is very limited research on the characterization of the interlaminar fracture toughness of 3D-printed composites. In this study, we investigated the feasibility of determining the mode I interlaminar fracture toughness of 3D-printed cFRP composites with multidirectional interfaces. First, elastic calculations and different FE simulations of Double Cantilever Beam (DCB) specimens (using cohesive elements for the delamination, in addition to an intralaminar ply failure criterion) were carried out to choose the best interface orientations and laminate configurations. The objective was to ensure a smooth and stable propagation of the interlaminar crack, while preventing asymmetrical delamination growth and plane migration, also known as crack jumping. Then, the best three specimen configurations were manufactured and tested experimentally to validate the simulation methodology. The experimental results confirmed that, with the appropriate stacking sequence for the specimen arms, it is possible to characterize the interlaminar fracture toughness in multidirectional 3D-printed composites under mode I. The experimental results also show that both initiation and propagation values of the mode I fracture toughness depend on the interface angles, although a clear tendency could not be established.
RESUMEN
Medical thermography has been around for several decades however due to its low specificity it has not become a popular medical diagnostic technique. The development of computational models of heat transfer in biological tissue can provide a deeper knowledge of healthy and nonhealthy thermal patterns which could increase the specificity of this technique increasing its usefulness in clinical diagnosis. In this work, the thermal pattern of cancerous tumors and cysts are calculated through finite element computer simulations using a real human female torso. The simulation results show a thermal pattern that agrees with infrared thermal images taken from female subjects, the simulated thermal patterns show real thermal features that do not appear in simulations performed using other approximate geometries of the breast. Results show that the temperature on the region of the skin closest to the tumor decreases for cysts while it increases for malignant tumors. The temperature patterns show a 20% deviation from thermal simulations using a hemispherical model of the breast, these results reinforce the notion that the geometry used for thermal simulation plays an important role in the accuracy of the simulations. These results are a first step in understanding benign and malignant thermal processes of the breast which might help increase the usefulness of infrared imaging in breast clinical diagnosis.
Asunto(s)
Neoplasias de la MamaRESUMEN
Fiber-reinforced foamed concrete (FRFC) is a lightweight material that has the potential to perform well in seismic applications due to its low density and improved mechanical properties. However, studies focused on the seismic assessment of this material are limited. In this work, U-shaped wall specimens, made of FRFC reinforced with henequen fibers and plain foamed concrete (PFC) with a density of 900 kg/m3, were subjected to shaking table tests. PFC and FRFC were characterized using compression and tension tests. FRFC exhibited enhanced mechanical properties, which were attributed to the fibers. The dynamic tests showed that U-shaped walls made of FRFC performed better than those made of PFC. The time period prior to the collapse of the FRFC U-shaped walls was longer than that of the PFC specimens, which was attributed to the enhanced specimen integrity by the fibers. Finite element simulations of the shaking table test allowed for the prediction of the stress concentration and plastic strain that may lead to the failure of the U-shaped wall. These results showed that U-shaped walls made of FRFC have the potential to perform well in seismic applications, however, these results are preliminary and further studies are needed to support the findings of this work.
RESUMEN
Spruce wood (picea abis) has been widely used as structural element, from buildings to musical instruments, due to its outstanding mechanical performances. The main stem transverse section exhibits growth rings formed by periodic fringes patterns, which are constituted by lamellae-tracheid arrangements. In order to improve the understanding of each wood microstructure role, the morphology and crystallinity of earlywood and latewood fibers were examined mainly using scanning electron microscopy, atomic force microscopy, and X-ray difracction. Moreover, measurements of effective elastic modulus and hardness were obtained by nanoindentation tests using a Berkovich indenter in order to confirmed increase in compactness of the wood microstructures. The results indicate that variations in mechanical properties values can be associated with well defined microstructural performances for each characteristic fiber type, where those that belong to latewood fiber showed the most improved behaviors. A finite element simulation of a lamellar-tracheids arrangement was carried out in order to clarify its stiffness and elastic deformation capabilities, as relevant factors contributing to the successful adaptation of picea abis colonies to harsh conditions habitats as well as for its construction applications of string instruments.
Asunto(s)
Microscopía de Fuerza Atómica , Picea/ultraestructura , Madera/ultraestructura , Fenómenos Biomecánicos , Análisis de Elementos Finitos , Microscopía Electrónica de Rastreo , Difracción de Rayos XRESUMEN
Se presenta la implementación numérica del modelo bioquímico descrito mediante el sistema de reacción-difusión de la parte 1. De los resultados obtenidos se puede concluir que la retroalimentación química de los 2 factores moleculares a través de un sistema de reacción-difusión (RD) con parámetros en el espacio de Turing, puede explicar la aparición de los patrones espacio-temporales encontrados en la arquitectura de la espongiosa primaria. Para la solución numérica fue usado el método de los elementos finitos junto con el método de Newton-Raphson para aproximar las ecuaciones diferenciales parciales lineales. Los patrones de osificación obtenidos pueden representar la formación de la espongiosa primaria durante la osificación endocondral...
A presentation is made of the numerical implementation of the biochemical model described by means of the reaction-diffusion system in Part 1. Based on the results obtained it may be concluded that the chemical feedback of the two molecular factors by means of a reaction-diffusion (RD) system with Turing space parameters may explain the appearance of the spatio-temporal patterns found in the architecture of the primary spongiosa. For the numerical solution, use was made of the finite element method in combination with the Newton-Raphson method to approximate the linear partial differential equations. The ossification patterns obtained may represent the formation of the primary spongiosa during endochondral ossification...