Microstructure evolution and catalytic activity of AlCo1-xFeNiTiMox high entropy alloys fabricated by powder metallurgy route.

This investigation presents the synthesis of equiatomic and non-equiatomic AlCo1-xFeNiTiMox (x = 0, 0.1, 0.25 and 1.0) high entropy alloys fabricated by mechanical alloying. Mo partially replaced Co. Classic thermodynamic calculations, such as mixing enthalpy (ΔHmix), configurational entropy (ΔSmix), the atomic size difference (δ), entropy to enthalpy ratio (Ω), electronegativity difference (△χ), and valence electron concentration (VEC) were used. Considering δ, Ω and VEC parameters, a BCC solid solution and an intermetallic phase can be predicted due to the partial replacement of Co by Mo. X-ray and electron diffraction of equiatomic HEA without Mo content revealed that after 35 h of milling, a Fe-type BCC lattice phase was formed in the alloy and two L21 phases, in addition to a minimal amount of FCC phase. As the Mo content increased, the Fe-type BCC phase was steadily replaced by the Mo-type BCC phase and the Fe-type FCC phase, and two L21 phases were also developed. When the 5 at% Mo-containing (x = 0.25) alloy was further milled for 80 h, the amount of phases remained almost the same; only the grain size was strongly reduced. The influence of the Mo addition on the properties of studied alloys was also confirmed in the decolourisation of Rhodamine B using a modified photo-Fenton process. The decolourisation efficiency within 20 min was 72% for AlCoFeNiTi and 87% for AlCo0.75FeNiTiMo0.25 using UV light with 365 nm wavelength.

Mesoporous High-Entropy Alloy Films.

High-entropy alloys (HEAs) are promising materials for electrochemical energy applications due to their excellent catalytic performance and durability. However, the controlled synthesis of HEAs with a well-defined structure and a uniform composition distribution remains a challenge. Herein, a soft template-assisted electrodeposition technique is used to fabricate a mesoporous HEA (m-HEA) film with a uniform composition distribution of Pt, Pd, Rh, Ru, and Cu, providing a suitable platform for investigating structure-performance relationships. Electrochemical deposition enables the uniform nucleation and grain growth of m-HEA, which can be deposited onto many conductive substrates. The m-HEA film exhibits an enhanced mass activity of 4.2 A mgPt-1 toward methanol oxidation reaction (MOR), which is 7.2-fold and 35-fold higher than a mesoporous Pt film and commercial Pt black, respectively. Experimental characterization indicates that structural defects and a low work function of the m-HEA film offer sufficient active sites and fast electron-transfer kinetics. Furthermore, theoretical calculations demonstrate that the variety of favorable adsorption sites on multimetallic elements of HEA reduces the barriers for dehydration pathways and *CO species removal, ensuring optimal performance for complex MOR reactions. This work provides an effective approach to designing a variety of HEA catalysts with well-controlled porous structures for targeted electrocatalytic applications.

High-Entropy Materials for Application: Electricity, Magnetism, and Optics.

High-entropy materials (HEMs) have recently emerged as a prominent research focus in materials science, gaining considerable attention because of their complex composition and exceptional properties. These materials typically comprise five or more elements mixed approximately in equal atomic ratios. The resultant high-entropy effects, lattice distortions, slow diffusion, and cocktail effects contribute to their unique physical, chemical, and optical properties. This study reviews the electrical, magnetic, and optical properties of HEMs and explores their potential applications. Additionally, it discusses the theoretical calculation methods and preparation techniques for HEMs, thereby offering insights and prospects for their future development.

Spontaneous Orientation Polarization of Anisotropic Equivalent Dipoles Harnessed by Entropy Engineering for Ultra-Thin Electromagnetic Wave Absorber.

The synthesis of carbon supporter/nanoscale high-entropy alloys (HEAs) electromagnetic response composites by carbothermal shock method has been identified as an advanced strategy for the collaborative competition engineering of conductive/dielectric genes. Electron migration modes within HEAs as manipulated by the electronegativity, valence electron configurations and molar proportions of constituent elements determine the steady state and efficiency of equivalent dipoles. Herein, enlightened by skin-like effect, a reformative carbothermal shock method using carbonized cellulose paper (CCP) as carbon supporter is used to preserve the oxygen-containing functional groups (O·) of carbonized cellulose fibers (CCF). Nucleation of HEAs and construction of emblematic shell-core CCF/HEAs heterointerfaces are inextricably linked to carbon metabolism induced by O·. Meanwhile, the electron migration mode of switchable electron-rich sites promotes the orientation polarization of anisotropic equivalent dipoles. By virtue of the reinforcement strategy, CCP/HEAs composite prepared by 35% molar ratio of Mn element (CCP/HEAs-Mn2.15) achieves efficient electromagnetic wave (EMW) absorption of - 51.35 dB at an ultra-thin thickness of 1.03 mm. The mechanisms of the resulting dielectric properties of HEAs-based EMW absorbing materials are elucidated by combining theoretical calculations with experimental characterizations, which provide theoretical bases and feasible strategies for the simulation and practical application of electromagnetic functional devices (e.g., ultra-wideband bandpass filter).

Fluorine-lodged high-valent high-entropy layered double hydroxide for efficient, long-lasting zinc-air batteries.

Efficient and stable bifunctional oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) catalysts are urgently needed to unlock the full potential of zinc-air batteries (ZABs). High-valence oxides (HVOs) and high entropy oxides (HEOs) are suitable candidates for their optimal electronic structures and stability but suffer from demanding synthesis. Here, a low-cost fluorine-lodged high-valent high-entropy layered double hydroxide (HV-HE-LDH) (FeCoNi2F4(OH)4) is conveniently prepared through multi-ions co-precipitation, where F- are firmly embedded into the individual hydroxide layers. Spectroscopic detections and theoretical simulations reveal high valent metal cations are obtained in FeCoNi2F4(OH)4, which enlarge the energy band overlap between metal 3d and O 2p, enhancing the electronic conductivity and charge transfer, thus affording high intrinsic OER catalytic activity. More importantly, the strengthened metal-oxygen (M-O) bonds and stable octahedral geometry (M-O(F)6) in FeCoNi2F4(OH)4 prevent structural reorganization, rendering long-term catalytic stability. Furthermore, an efficient three-phase reaction interface with fast oxygen transportation was constructed, significantly improving the ORR activity. ZABs assembled with FeCoNi2F4(OH)4@HCC (hydrophobic carbon cloth) cathodes deliver a top performance with high round-trip energy efficiency (60.6% at 10 mA cm-2) and long-term stability (efficiency remains at 58.8% after 1050 charge-discharge cycles).

Giant Capacitive Energy Storage in High-Entropy Lead-Free Ceramics with Temperature Self-Check.

Considering the large demand for electricity in the era of artificial intelligence and big data, there is an urgent need to explore novel energy storage media with higher energy density and intelligent temperature self-check functions. High-entropy (HE) ceramic capacitors are of great significance because of their excellent energy storage efficiency and high power density (PD). However, the contradiction between configurational entropy and polarization in traditional HE systems greatly restrains the increase in energy storage density. Herein, the contradiction is effectively solved by regulating the octahedral tilt and cationic displacement in ABO3-type perovskite HE ceramics, i.e., (1-x)[0.6(Bi0.47Na0.47Yb0.03Tm0.01)TiO3-0.4(Ba0.5Sr0.5)TiO3]-xSr(Zr0.5Hf0.5)O3 (BNYTT-BST-xSZH). Combining the tape-casting process and cold isostatic pressing, the optimal BNYTT-BST-0.06SZH ceramic displays a large recoverable energy storage density (10.46 J cm-3) at 685 kV cm-1 and a high PD (332.88 MW cm-3). More importantly, due to Tm/Yb codoping, abnormal fluorescent negative thermal expansion and excellent real-time temperature sensing are developed, thus the application of fault detection and warning in high-voltage transmission line systems is conceptualized. This study provides an effective strategy for enhancing the polarization of energy-storing HE ceramics and offers a promising material for overcoming the problems of insufficient capacitor density and thermal runaway in terminal communication.

Enhanced Magnetocaloric Properties of the (MnNi)0.6Si0.62(FeCo)0.4Ge0.38 High-Entropy Alloy Obtained by Co Substitution.

In order to improve the magnetocaloric properties of MnNiSi-based alloys, a new type of high-entropy magnetocaloric alloy was constructed. In this work, Mn0.6Ni1-xSi0.62Fe0.4CoxGe0.38 (x = 0.4, 0.45, and 0.5) are found to exhibit magnetostructural first-order phase transitions from high-temperature Ni2In-type phases to low-temperature TiNiSi-type phases so that the alloys can achieve giant magnetocaloric effects. We investigate why chexagonal/ahexagonal (chexa/ahexa) gradually increases upon Co substitution, while phase transition temperature (Ttr) and isothermal magnetic entropy change (ΔSM) tend to gradually decrease. In particular, the x = 0.4 alloy with remarkable magnetocaloric properties is obtained by tuning Co/Ni, which shows a giant entropy change of 48.5 J∙kg-1K-1 at 309 K for 5 T and an adiabatic temperature change (ΔTad) of 8.6 K at 306.5 K. Moreover, the x = 0.55 HEA shows great hardness and compressive strength with values of 552 HV2 and 267 MPa, respectively, indicating that the mechanical properties undergo an effective enhancement. The large ΔSM and ΔTad may enable the MnNiSi-based HEAs to become a potential commercialized magnetocaloric material.

High-Entropy Electrode Materials: Synthesis, Properties and Outlook.

High-entropy materials represent a new category of high-performance materials, first proposed in 2004 and extensively investigated by researchers over the past two decades. The definition of high-entropy materials has continuously evolved. In the last ten years, the discovery of an increasing number of high-entropy materials has led to significant advancements in their utilization in energy storage, electrocatalysis, and related domains, accompanied by a rise in techniques for fabricating high-entropy electrode materials. Recently, the research emphasis has shifted from solely improving the performance of high-entropy materials toward exploring their reaction mechanisms and adopting cleaner preparation approaches. However, the current definition of high-entropy materials remains relatively vague, and the preparation method of high-entropy materials is based on the preparation method of single metal/low- or medium-entropy materials. It should be noted that not all methods applicable to single metal/low- or medium-entropy materials can be directly applied to high-entropy materials. In this review, the definition and development of high-entropy materials are briefly reviewed. Subsequently, the classification of high-entropy electrode materials is presented, followed by a discussion of their applications in energy storage and catalysis from the perspective of synthesis methods. Finally, an evaluation of the advantages and disadvantages of various synthesis methods in the production process of different high-entropy materials is provided, along with a proposal for potential future development directions for high-entropy materials.

Research on hot cracking in laser welding of Al-contaminated CoCrFeMnNi high-entropy alloys.

To study the thermal cracking susceptibility of laser-welded CoCrFeMnNi high-entropy alloys, stainless steel and aluminum alloy plates were each used as backing for welding. The microstructure of the weld and morphology of the fracture were examined. In addition, the chemical compositions of the fractures, the interfacial tension between the CoCrFeMnNi high-entropy alloy and liquid aluminum alloy, and the linear expansion coefficient of the CoCrFeMnNi high-entropy alloy were determined. The results show that when stainless steel is used as the base plate, no cracking is apparent in the weld, and the microstructure is made up of dendrites and equiaxed crystals. Conversely, when an aluminum alloy plate is adopted, solidification cracks are seen at the center of the weld, and the microstructure consists of bright polygonal dendrites scattered in a dark gray matrix. In the later stage of solidification, the contact angle between the Al-dominated low-melt liquid metal and the CoCrFeMnNi high-entropy alloy is about 14.6°, which is distributed in the form of a liquid film between the dendrite of the CoCrFeMnNi high-entropy alloy weld, and the linear expansion coefficient of the high-entropy alloy is 23 × 10-6-25 × 10-6 K-1 in the temperature range of 900-1100 K, which is higher than the thermal expansion coefficient of austenitic stainless steel in this range, and the solidification temperature range is 1000-1400K. Therefore, thermal cracks tend to occur during the solidification process.

Spatial Structure of Electron Interactions in High-entropy Oxide Nanoparticles for Active Electrocatalysis of Carbon Dioxide Reduction.

High-entropy oxides (HEOs) exhibit distinctive catalytic properties owing to their diverse elemental compositions, garnering considerable attention across various applications. However, the preparation of HEO nanoparticles with different spatial structures remains challenging due to their inherent structural instability. Herein, ultrasmall high-entropy oxide nanoparticles (less than 5 nm) with different spatial structures are synthesized on carbon supports via the rapid thermal shock treatment. The low-symmetry HEO, BiSbInCdSn-O4, demonstrates exceptional performance for electrocatalytic carbon dioxide reaction (eCO2RR), including a lower overpotential, high Faraday efficiency across a wide electrochemical range (-0.3 to -1.6 V), and sustained stability for over100 h. In the membrane electrode assembly electrolyzer, BiSbInCdSn-O4 achieves a current density of 350 mA cm-2 while maintaining good stability for 24 h. Both experimental observations and theoretical calculations reveal that the electron donor-acceptor interactions between bismuth and indium sites in BiSbInCdSn-O4 enable the electron delocalization to facilitate the efficient adsorption of CO2 and hydrogenation reactions. Thus, the energy barrier of the rate-determining step is reduced to enhance the electrocatalytic activity and stability. This study elucidates that the spatial structure of metal sites in HEOs is able to regulate CO2 adsorption status for eCO2RR, paving the way for the rational design of efficient HEO catalysts.

Exploring thermophysical properties of CoCrFeNiCu high entropy alloy via molecular dynamics simulations.

High entropy alloys (HEAs) are alloys composed of five or more primary elements in equal or nearly equal proportions of atoms. In the present study, the thermophysical properties of the CoCrFeNiCu high entropy alloy (HEA) were investigated by a molecular dynamics (MD) method at nanoscale. The effects of the content of individual elements on lattice thermal conductivity k p were revealed, and the results suggested that adjusting the atomic content can be a way to control the lattice thermal conductivity of HEAs. The effects of temperature on k p were investigated quantitively, and a power-law relationship of k p with T -0.419 was suggested, which agrees with previous findings. The effects of temperature and the content of individual elements on volumetric specific heat capacity C v were also studied: as the temperature increases, the C v of all HEAs slightly decreases and then increases. The effects of atomic content on C v varied with the comprising elements. To further understand heat transfer mechanisms in the HEAs, the phonon density of states (PDOS) at different temperatures and varying atomic composition was calculated: Co and Ni elements facilitate the high-frequency vibration of phonons and the Cu environment weakens the heat transfer via low-frequency vibration of photons. As the temperature increases, the phonon mean free path (MFP) in the equiatomic CoCrFeNiCu HEA decreases, which may be attributed to the accelerated momentum of atoms and intensified collisions of phonons. The present research provides theoretical foundations for alloy design and have implications for high-performance alloy smelting.

Platinum-Group Metal High-Entropy Selenides for the Hydrogen Evolution Reaction.

The selenides of platinum-group metals (PGMs) are emerging as promising catalysts for diverse electrochemical reactions. To date, most studies have focused on single metal or bimetallic systems, whereas the preparation of a high-entropy (HE) selenide consisting of five or more PGM elements holds the promise to further enhance catalytic performance by introducing abundant active sites with various local coordination environments and electronic structures. Herein, we report for the first time the synthesis of PGM-based HE-Selenide (HE-Se) nanoparticles with a unique amorphous structure. The atomic metal-Se coordination and the presence of short-range order were thoroughly revealed. It is further shown that the amorphous HE-Se can be facilely transformed into a single-phase crystalline HE-Se with a cubic structure by thermal annealing. Catalytically, the amorphous HE-Se showed better acidic hydrogen evolution activity over monometallic PGM-based selenides and the crystalline counterpart, demonstrating the advantages of high-entropy configuration and amorphous structure. Our findings may pave the way toward the synthesis and property exploration of amorphous PGM-based selenides with tunable compositions.

Deformation-induced grain boundary segregation in a powder-metallurgy ultrafine-grained MoNbTaTiV refractory high-entropy alloy.

A powder-metallurgy MoNbTaTiV refractory high-entropy alloy synthesized by mechanical alloying (MA) and spark plasma sintering was subjected to hot deformations at different temperatures and strain rates. The microstructural morphologies were characterized, and component element segregation was elucidated. With grain refinement and lattice strain increase, the large inhomogeneous milled powder became refined and homogeneous after the MA. Component element segregation was observed at relatively low deformation temperatures and high strain rates. As the deformation temperature increased and the strain rate decreased, the segregation gradually disappeared, which was attributed to dislocation movement.

Accelerating the Discovery of Efficient High-Entropy Alloy Electrocatalysts: High-Throughput Experimentation and Data-Driven Strategies.

High-entropy alloys (HEAs) present both significant potential and challenges for developing efficient electrocatalysts due to their diverse combinations and compositions. Here, we propose a procedural approach that combines high-throughput experimentation with data-driven strategies to accelerate the discovery of efficient HEA electrocatalysts for the hydrogen evolution reaction (HER). This enables the rapid preparation of HEA arrays with various element combinations and composition ratios within a model system. The intrinsic activity of the HEA arrays is swiftly screened using scanning electrochemical cell microscopy (SECCM), providing precise composition-activity data sets for the HEA system. An ensemble machine learning (EML) model is then used to predict the activity database for the composition subspace of the system. Based on these database results, two groups of promising catalysts are recommended and validated through actual electrocatalytic evaluations. This procedural approach, which combines high-throughput experimentation with data-driven strategies, provides a new pathway to accelerate the discovery of efficient HEA electrocatalysts.

Atomic Scale Responses of High Entropy Oxides to Redox Environments.

The potential of high entropy oxides (HEOs) as high-performance energy storage materials and catalysts has been mainly understood through their bulk structures. However, the importance of their surfaces, which may play an even more critical role, remains largely unknown. In this study, we employed advanced scanning transmission electron microscopy to investigate the atomic-scale structural and chemical responses of CeYLaHfTiZrOx HEOs to high-temperature redox environments. Our observations reveal dynamic elemental and structural reconstructions in the surface of HEOs under different gas environments, contrasting with the high stability of the bulk structure. Notably, the surfaces of HEO particles consistently exhibit abundant oxygen vacancies, regardless of the redox environment. These findings indicate that HEOs offer distinct advantages in facilitating chemical and electrochemical reactions, relying on oxygen vacancies. Our results also suggest that the exceptional performance of HEOs in energy storage applications arises from surface structural and chemical adaptability.

High-Entropy Metal-Organic Frameworks (HEMOFs): A New Frontier in Materials Design for CO2 Utilization.

High-entropy materials (HEMs) emerged as promising candidates for a diverse array of chemical transformations, including CO2 utilization. However, traditional HEMs catalysts are nonporous, limiting their activity to surface sites. Designing HEMs with intrinsic porosity can open the door toward enhanced reactivity while maintaining the many benefits of high configurational entropy. Here, a synergistic experimental, analytical, and theoretical approach to design the first high-entropy metal-organic frameworks (HEMOFs) derived from polynuclear metal clusters is implemented, a novel class of porous HEMs that is highly active for CO2 fixation under mild conditions and short reaction times, outperforming existing heterogeneous catalysts. HEMOFs with up to 15 distinct metals are synthesized (the highest number of metals ever incorporated into a single MOF) and, for the first time, homogenous metal mixing within individual clusters is directly observed via high-resolution scanning transmission electron microscopy. Importantly, density functional theory studies provide unprecedented insight into the electronic structures of HEMOFs, demonstrating that the density of states in heterometallic clusters is highly sensitive to metal composition. This work dramatically advances HEMOF materials design, paving the way for further exploration of HEMs and offers new avenues for the development of multifunctional materials with tailored properties for a wide range of applications.

Synergistic Performance of Thermoelectric and Mechanical in Nanotwinned High-Entropy Semiconductors AgMnGePbSbTe5.

Introducing nanotwins in thermoelectric materials represents a promising approach to achieving such a synergistic combination of thermoelectric properties and mechanical properties. By increasing configurational entropy, a sharply reduced stacking fault energy in a new nanotwinned high-entropy semiconductor AgMnGePbSbTe5 is reached. Dense coherent nanotwin boundaries in this system provide an efficient phonon scattering barrier, leading to a high figure of merit ZT of ≈2.46 at 750 K and a high average ZT of ≈1.54 (300-823 K) with the presence of Ag2Te nanoprecipitate in the sample. More importantly, owing to the dislocation pinning caused by coherent nanotwin boundaries and the chemical short-range disorder caused by the high configurational entropy effect, AgMnGePbSbTe5 also exhibits robust mechanical properties, with flexural strength of 82 MPa and Vickers hardness of 210 HV.

High-Entropy Materials for Prospective Biomedical Applications: Challenges and Opportunities.

With their unique structural characteristics, customizable chemical composition, and adjustable functional characteristics, high-entropy materials (HEMs) have triggered a wide range of interdisciplinary research, especially in the biomedical field. In this paper, the basic concept, core properties, and preparation methods of HEMs are first summarized, and then the application and development of HEMs in the field of biomedical are briefly described. Subsequently, based on the diverse and comprehensive properties of HEMs and a few reported cases, the possible application scenarios of HEMs in biological fields such as biosensors, antibacterial materials, therapeutics, bioimaging, and tissue engineering are prospectively predicted and discussed. Finally, their potential advantages and major challenges is summarized, which may provide useful guidance and principles for researchers to develop and optimize novel HEMs.

Synthesis of a novel AlBeSiTiV light weight HEA coating on SS316 using atmospheric plasma spray process.

High Entropy Alloys (HEAs) are currently a subject of significant research interest in the fields of materials science and engineering. They are rapidly evolving due to their exceptional properties, and there is considerable focus on expanding their application potential by developing HEA coatings on various substrate materials. This area of study holds promise for advancing technology and innovation in diverse industries. In this study, a novel equiatomic AlBeSiTiV Light Weight HEA was synthesized via mechanical alloying and was sprayed on the substrate SS316 by the thermal spray process. The microstructural characterization revealed that synthesized HEA had a major FCC phase and the average coating thickness was observed to be 150 µm. The average microhardness was measured to be 975 ± 13 HV for the coating which was five times than the substrate. The coated samples' wear resistance was found out using a pin-on-disc apparatus by varying the wear process parameters and Taguchi's L27 Orthogonal Array was used to interpret the parametric influence on wear rate. ANOVA and regression analysis revealed applied load to be the most significant factor followed by distance and velocity. The major wear mechanisms observed were adhesion abrasion and oxidation, and the formation of tribolayer was observed at higher velocity and distance.

Alkali Metals Activated High Entropy Double Perovskites for Boosted Hydrogen Evolution Reaction.

An efficient and facile water dissociation process plays a crucial role in enhancing the activity of alkaline hydrogen evolution reaction (HER). Considering the intricate influence between interfacial water and intermediates in typical catalytic systems, meticulously engineered catalysts should be developed by modulating electron configurations and optimizing surface chemical bonds. Here, a high-entropy double perovskite (HEDP) electrocatalyst La2(Co1/6Ni1/6Mg1/6Zn1/6Na1/6Li1/6)RuO6, achieving a reduced overpotential of 40.7 mV at 10 mA cm-2 and maintaining exemplary stability over 82 h in a 1 m KOH electrolyte is reported. Advanced spectral characterization and first-principles calculations elucidate the electron transfer from Ru to Co and Ni positions, facilitated by alkali metal-induced super-exchange interaction in high-entropy crystals. This significantly optimizes hydrogen adsorption energy and lowers the water decomposition barrier. Concurrently, the super-exchange interaction enhances orbital hybridization and narrows the bandgap, thus improving catalytic efficiency and adsorption capacity while mitigating hysteresis-driven proton transfer. The high-entropy framework also ensures structural stability and longevity in alkaline environments. The work provides further insights into the formation mechanisms of HEDP and offers guidelines for discovering advanced, efficient hydrogen evolution catalysts through super-exchange interaction.