Multistrategy Engineering of an Inulosucrase to Enhance the Activity and Thermostability for Efficient Production of Microbial Inulin.

Inulin has found commercial applications in the pharmaceutical, nutraceutical, and food industries due to its beneficial health effects. The enzymatic biosynthesis of microbial inulin has garnered increasing attention. In this study, molecular modification was applied to Lactobacillus mulieris UMB7800 inulosucrase, an enzyme that specifically produces high-molecular weight inulin, to enhance its catalytic activity and thermostability. Among the 18 variable regions, R5 was identified as a crucial region significantly impacting enzymatic activity by replacing it with more conserved sequences. Site-directed mutagenesis combined with saturated mutagenesis revealed that the mutant A250 V increased activity by 68%. Additionally, after screening candidate mutants by rational design, four single-point mutants, S344D, H434P, E526D, and G531P, were shown to enhance thermostability. The final combinational mutant, M5, exhibited a 66% increase in activity and a 5-fold enhancement in half-life at 55 °C. These findings are significant for understanding the catalytic activity and thermostability of inulosucrase and are promising for the development of microbial inulin biosynthesis platforms.

Biochemical characterisation and production kinetics of high molecular-weight (HMW) putative antibacterial proteins of insect pathogenic Brevibacillus laterosporus isolates.

BACKGROUND: Bacterial genomes often encode structures similar to phage capsids (encapsulins) and phage tails which can be induced spontaneously or using genotoxic compounds such as mitomycin C. These high molecular-weight (HMW) putative antibacterial proteins (ABPs) are used against the competitive strains under natural environment. Previously, it was unknown whether these HMW putative ABPs originating from the insect pathogenic Gram-positive, spore-forming bacterium Brevibacillus laterosporus (Bl) isolates (1821L, 1951) are spontaneously induced during the growth and pose a detrimental effect on their own survival. Furthermore, no prior work has been undertaken to determine their biochemical characteristics. RESULTS: Using a soft agar overlay method with polyethylene glycol precipitation, a narrow spectrum of bioactivity was found from the precipitated lysate of Bl 1951. Electron micrographs of mitomycin C- induced filtrates showed structures similar to phage capsids and contractile tails. Bioactivity assays of cell free supernatants (CFS) extracted during the growth of Bl 1821L and Bl 1951 suggested spontaneous induction of these HMW putative ABPs with an autocidal activity. Sodium dodecyl sulphate-polyacrylamide gel electrophoresis of spontaneously induced putative ABPs showed appearance of ~ 30 kDa and ~ 48 kDa bands of varying intensity across all the time intervals during the bacterial growth except in the initial hours. Statistically, spontaneously induced HMW putative ABPs of Bl 1951 exhibited a significant decrease in the number of viable cells of its producer strain after 18 h of growth in liquid. In addition, a significant change in pH and prominent bioactivity of the CFS of this particular time period was noted. Biochemically, the filtered supernatant derived from either Bl 1821L or Bl 1951 maintained bioactivity over a wide range of pH and temperature. CONCLUSION: This study reports the spontaneous induction of HMW putative ABPs (bacteriocins) of Bl 1821L and Bl 1951 isolates during the course of growth with potential autocidal activity which is critically important during production as a potential biopesticide. A narrow spectrum of putative antibacterial activity of Bl 1951 precipitate was found. The stability of HMW putative ABPs of Bl 1821L and Bl 1951 over a wide range of pH and temperature can be useful in expanding the potential of this useful bacterium beyond the insecticidal value.

High-molecular-weight Fucoidan exerts an immune-enhancing effect in RAW 264.7 cells and cyclophosphamide-induced immunosuppression rat by altering the gut microbiome.

High-molecular-weight fucoidan (Fucoidan P), sourced from Undaria pinnatifida exhibits several health benefits, including immunomodulation. However, the mechanisms underlying the immune-enhancing effects of Fucoidan P remain unclear. Here, we investigated the immune-enhancing effects and the potential mechanisms of Fucoidan P using RAW 264.7 macrophages and cyclophosphamide (CP)-induced immunosuppression rat model. In macrophages, Fucoidan P showed dose-dependent stimulation by increasing cell proliferation, nitric oxide production, and gene expression of inducible nitric oxide synthase, cyclooxygenase-2, and proinflammatory cytokines. These effects are mediated through the activation of the nuclear factor-kappa B (NF-κB) signaling pathway. Moreover, orally administered Fucoidan P was evaluated in immunosuppressed rats treated with CP. Fucoidan P administration increased hematological values and natural killer cell activity, and positively affected nitrite and prostaglandin E2 levels. The Fucoidan P treatment groups exhibited improved serum cytokine levels as well as splenic and intestinal cytokine mRNA expression compared to the model group. Fucoidan P also mitigated splenic damage and increased the phosphorylation of NF-κB and NF-κB inhibitor alpha (IκBα). Furthermore, Fucoidan P treatment altered the gut microbiota composition, enhancing the alpha diversity, evenness, and abundance of Bacteroidetes, which are associated with immune function. Taken together, our findings suggest that Fucoidan P exerts beneficial effects on immune function by activating NF-κB and modulating gut microbiota. These findings suggested its potential as a therapeutic agent for immune enhancement.

Disclosing Topographical and Chemical Patterns in Confined Films of High-Molecular-Weight Block Copolymers under Controlled Solvothermal Annealing.

The microphase separation of high-molecular-weight block copolymers into nanostructured films is strongly dependent on the surface fields. Both, the chain mobility and the effective interaction parameters can lead to deviations from the bulk morphologies in the structures adjacent to the substrate. Resolving frustrated morphologies with domain period L0 above 100 nm is an experimental challenge. Here, solvothermal annealing was used to assess the contribution of elevated temperatures of the vapor Tv and of the substrate Ts on the evolution of the microphase-separated structures in thin films symmetric of polystyrene-b-poly(2vinylpyridine) block copolymer (PS-PVP) with L0 about 120 nm. Pronounced topographic mesh-like and stripe patterns develop on a time scale of min and are attributed to the perforated lamella (PL) and up-standing lamella phases. By setting Tv/Ts combinations it is possible to tune the sizes of the resulting PL patterns by almost 10%. Resolving chemical periodicity using selective metallization of the structures revealed multiplication of the topographic stripes, i.e., complex segregation of the component within the topographic pattern, presumably as a result of morphological phase transition from initial non-equilibrium spherical morphology. Reported results reveal approaches to tune the topographical and chemical periodicity of microphase separation of high-molecular-weight block copolymers under strong confinement, which is essential for exploiting these structures as functional templates.

Investigating the Feasibility and Performance of Hybrid Overmolded UHMWPE 3D-Printed PEEK Structural Composites for Orthopedic Implant Applications: A Pilot Study.

Ultra-high-molecular-weight polyethylene (UHMWPE) components for orthopedic implants have historically been integrated into metal backings by direct-compression molding (DCM). However, metal backings are costly, stiffer than cortical bone, and may be associated with medical imaging distortion and metal release. Hybrid-manufactured DCM UHMWPE overmolded additively manufactured polyetheretherketone (PEEK) structural components could offer an alternative solution, but are yet to be explored. In this study, five different porous topologies (grid, triangular, honeycomb, octahedral, and gyroid) and three surface feature sizes (low, medium, and high) were implemented into the top surface of digital cylindrical specimens prior to being 3D printed in PEEK and then overmolded with UHMWPE. Separation forces were recorded as 1.97-3.86 kN, therefore matching and bettering the historical industry values (2-3 kN) recorded for DCM UHMWPE metal components. Infill topology affected failure mechanism (Type 1 or 2) and obtained separation forces, with shapes having greater sidewall numbers (honeycomb-60%) and interconnectivity (gyroid-30%) through their builds, tolerating higher transmitted forces. Surface feature size also had an impact on applied load, whereby those with low infill-%s generally recorded lower levels of performance vs. medium and high infill strategies. These preliminary findings suggest that hybrid-manufactured structural composites could replace metal backings and produce orthopedic implants with high-performing polymer-polymer interfaces.

Acquired von Willebrand syndrome during extracorporeal membrane oxygenation support: a comprehensive review of current evidence: communication from the ISTH SSC on perioperative and critical care thrombosis and hemostasis.

During extracorporeal membrane oxygenation (ECMO) support, the high shear stress in the ECMO circuit results in increased proteolysis of von Willebrand factor (VWF), loss of VWF high-molecular-weight multimers, and impaired ability to bind to platelets and collagen. These structural changes in VWF are consistent with acquired von Willebrand syndrome (AVWS) type 2A and may contribute to the bleeding diathesis frequently observed in ECMO patients. We performed a systematic review of all clinical studies evaluating the prevalence and associated outcomes of AVWS in ECMO patients. Our findings suggest that almost all ECMO patients develop partial or complete loss of VWF high-molecular-weight multimers within a few hours of device implantation. The AVWS persists as long as the patient is supported by ECMO. Weaning from ECMO rapidly and completely resolves the AVWS. Nevertheless, few studies have reported bleeding outcomes in ECMO patients with AVWS, and the extent to which AVWS contributes to the bleeding diathesis during ECMO support cannot be determined by current evidence. Data supporting the use of VWF concentrates to prevent bleeding complications in ECMO patients remain limited.

Effectiveness of topical hyaluronic acid of different molecular weights in xerosis cutis treatment in elderly: a double-blind, randomized controlled trial.

Dry skin is a common dermatological condition that frequently affects the elderly. A contributing cause to dry skin is a reduced concentration of hyaluronic acid (HA) in both the epidermis and dermis. The effectiveness of moisturizer containing HA as a therapy for dry skin is impacted by its specific molecular weight. Low molecular weight HA (LMWHA) is believed to be more effective in replenishing skin hydration in aging skin compared to High Molecular Weight HA (HMWHA) due to its ability to penetrate the stratum corneum. However, there is a lack of clinical research supporting this claim. A double-blind, randomized controlled trial was conducted on 36 residents of a nursing home in Jakarta. The participants, aged between 60 and 80 years, had been diagnosed with dry skin. Each test subject was administered three distinct, randomized moisturizing lotions (LMWHA, HMWHA, or vehicle), to be topically applied to three separate sites on the leg. Skin capacitance (SCap), transepidermal water loss (TEWL), and specified symptom sum score (SRRC) were measured at weeks 0, 2, and 4. After four weeks of therapy, area that was treated with LMWHA showed greater SCap values compared to the area treated with HMWHA (56.37 AU vs. 52.37 AU, p = 0.004) and vehicle (56.37 AU vs. 49.01 AU, p < 0.001). All groups did not show any significant differences in TEWL and SRRC scores. No side effects were found in all groups. The application of a moisturizer containing LMWHA to the dry skin of elderly resulted in significant improvements in skin hydration compared to moisturizers containing HMWHA and vehicle. Furthermore, these moisturizers demonstrated similar safety in treating dry skin in the elderly. ClinicalTrials.gov Identifier NCT06178367, https://clinicaltrials.gov/study/NCT06178367 .

Recent Advancements in the Synthesis of Ultra-High Molecular Weight Polyethylene via Late Transition Metal Catalysts.

Ultra-high molecular weight polyethylenes (UHMWPEs) are significant engineering plastics for their unique properties, such as high impact resistance, abrasion resistance, weatherability, lubricity, and chemical resistance. Consequently, developing a suitable catalyst is vital in facilitating the preparation of UHMWPE. The late transition metal catalysts have emerged as effective catalysts in producing UHMWPE due to their availability, enhanced tolerance to heteroatom groups, active polymerization characteristics, and good copolymerization ability with polar monomers. In this review, we mainly focus on the late transition metal catalysts, summarizing advancements in their application over the past decade. Four key metals (Ni, Pd, Fe, Co) for generating linear or branched UHMWPE will be primarily explored in this manuscript.

Diagnostics of IgE-mediated occupational allergies: Between reality, requirements, and opportunities.

Occupational skin and respiratory allergies are among the most common occupational diseases in Germany. The identification of the allergy trigger is essential for the recognition of an occupational allergy as well as for effective individual prevention. However, occupational type I allergens are among the "rare" allergens and the possibilities of guideline-compliant diagnosis using quality-tested skin test solutions is becoming increasingly difficult due to the reduction in commercially available test allergens. In order to guarantee meaningful diagnostic workup for all affected insured persons with suspected occupational type I allergies and to ensure this in the future, a durable optimization, standardization, and availability of allergy tests for occupational allergic diseases is urgently required. The need for action has been recognized by the German Social Accident Insurance (DGUV), and steps to eliminate the diagnostic gaps have been initiated by a joint research project at the Institute for Prevention and Occupational Medicine of the DGUV (IPA) and the Paul Ehrlich Institut (PEI). The evaluation of alternative methods for the production of standardized test allergen solutions can also be used for newly emerging allergens in the workplace. New allergen sources at workplaces and thus also sensitization and allergies among employees can be expected as a result of changes in work processes and the introduction of new technologies and/or working materials, which are also introduced in connection with climate change and the concept of sustainability.

High molecular weight hyaluronic acid-liposome delivery system for efficient transdermal treatment of acute and chronic skin photodamage.

Photodamage is one of the most common causes of skin injury. High molecular weight hyaluronic acid (HHA) has shown immense potential in the treatment of skin photodamage by virtue of its anti-inflammatory, reparative, and antioxidative properties. However, due to its large molecular structure of HHA, HHA solution could only form a protective film on the skin surface in conventional application, failing to effectively penetrate the skin, which necessitates the development of new delivery strategies. Liposomes, with a structure similar to biological membranes, have garnered extensive attention as transdermal drug delivery carriers because of their advantages in permeability, dermal compatibility, and biosafety. Herein, we have developed a HHA-liposome transdermal system (HHL) by embedding HHA into the liposome structure using reverse evaporation, high-speed homogenization, and micro-jet techniques. The effective penetration and long-term residence of HHA in skin tissue were multidimensionally verified, and the kinetics of HHA in the skin were extensively studied. Moreover, it was demonstrated that HHL significantly strengthened the activity of human keratinocytes and effectively inhibits photo-induced cellular aging in vitro. Furthermore, a murine model of acute skin injury induced by laser ablation was established, where the transdermal system showed significant anti-inflammatory and immunosuppressive properties, promoting skin proliferation and scar repair, thereby demonstrating immense potential in accelerating skin wound healing. Meanwhile, HHL significantly ameliorated skin barrier dysfunction caused by simulated sunlight exposure, inhibited skin erythema, inflammatory responses, and oxidative stress, and promoted collagen expression in a chronic photodamage skin model. Therefore, this transdermal delivery system with biocompatibility represents a promising new strategy for the non-invasive application of HHA in skin photodamage, revealing the significant potential for clinical translation and broad application prospects. STATEMENT OF SIGNIFICANCE: The transdermal system utilizing hyaluronic acid-based liposomes enhances skin permeability and retains high molecular weight hyaluronic acid (HHL). In vitro experiments with human keratinocytes demonstrate significant skin repair effects of HHL and its effective inhibition of cellular aging. In an acute photodamage model, HHL exhibits stronger anti-inflammatory and immunosuppressive properties, promoting skin proliferation and scar repair. In a chronic photodamage model, HHL significantly improves skin barrier dysfunction, reduces oxidative stress induced by simulated sunlight, and enhances collagen expression.

Integrated neuromuscular training intervention applied in schools induces a higher increase in salivary high molecular weight adiponectin and a more favorable body mass index, cardiorespiratory fitness and muscle strength in children as compared to the traditional physical education classes.

Background: High-molecular-weight adiponectin (HMW-adiponectin) is a cardio-metabolic health protector. Objectives: (1) to compare body mass index (BMI), cardiorespiratory fitness (CRF) and muscle strength (MS) in healthy school-children depending on their baseline salivary-HMW-adiponectin concentration; and (2) to apply a 3-month integrated neuromuscular training (INT) and evaluate its effects on salivary-HMW-adiponectin concentration, BMI, CRF and MS in the same children. Additional goal: to identify if any potential changes during the 3-month period may be related to a potential change in salivary-HMW-adiponectin concentration. Methods: Ninety children (7.4 ± 0.3 years) were recruited in primary schools and randomly allocated into control or intervention group. The intervention consisted of a 3-month INT applied during physical education (PE) classes, twice-weekly, while the control group had traditional PE classes. Body mass and height were measured, BMI was calculated and HMW-adiponectin was quantified in saliva. To assess CRF and MS, 800 m-run and hand-dynamometry were applied, respectively. All measurements were performed twice, at baseline and after 3 months. Results: Children with higher baseline salivary-HMW-adiponectin have more favorable BMI (p = 0.006) and slightly higher CRF (p = 0.017) in comparison to the children with lower baseline salivary-HMW-adiponectin. There were no big changes after the 3-month-period neither in the control, nor the INT group. However, it is worthy to note that the INT induced slightly higher increase in salivary-HMW-adiponectin (p = 0.007), and a slightly higher improvement in BMI (p = 0.028), CRF (p = 0.043) and MS (p = 0.003), as compared to the traditional PE classes. Finally, the INT-induced improvement in CRF was associated with the increased post-salivary-HMW-adiponectin concentration (p = 0.022). Conclusion: Main findings may suggest the potential utility of an INT as a cost-effective strategy that can be applied in schools to induce cardio-protective effects in school-children.

Accessing Functionalized Ultra-High Molecular Weight Poly(α-olefin)s via Hafnium-Mediated Highly Isospecific Copolymerization.

Inspired by the favorable impact of heteroatom-containing groups in phenoxy-imine titanium and late transition metal catalysts, a series of novel pyridylamido hafnium catalysts bearing ─OMe (Cat-OMe), ─CF3 (Cat-CF3), and ─C6F5 (Cat-C6F5) substituents are designed and synthesized. Together with the established hafnium catalysts Cat-H and Cat-iPr by Dow/Symyx, these catalysts are applied in the polymerization of α-olefins, including 1-hexene, 1-octene, and 4M1P, as well as in the copolymerization of these α-olefins with a specifically designed polar monomer. The enhancement of polymer molecular weight derived from catalyst modification and the incorporation of polar monomers is discussed in detail. Notably, the new catalysts are all highly active for α-olefins polymerization, with catalyst Cat-CF3 producing isotactic polymers with the highest molecular weight (Mw = 1649 kg mol-1); in copolymerization with polar monomers, catalyst Cat-OMe yields isotactic copolymer with the highest molecular weight (Mw = 2990 kg mol-1). Interestingly, catalyst Cat-C6F5 bearing a ─C6F5 group in the N-aryl moiety gives rise to poly(α-olefin) with reduced stereoselectivity. The findings of this study underscore the potential of heteroatom-containing groups in the development of early transition metal catalysts and the synthesis of polymer with novel structures.

Sustainable production of multimeric and functional recombinant human adiponectin using genome-edited chickens.

BACKGROUND: Adiponectin (ADPN) plays a critical role in endocrine and cardiovascular functions, but traditional production methods, such as Escherichia coli and mammalian systems, have faced challenges in generating sufficiently active middle molecular weight (MMW) and high molecular weight (HMW) forms of recombinant human ADPN (hADPN). In our previous study, we proposed genome-edited chickens as an efficient platform for producing multimeric hADPN. However, the consistency of multimeric hADPN expression in this system across generations had not been further investigated. RESULTS: In this study, subsequent generations of ovalbumin (OVA) ADPN knock-in chickens showed stable multimeric hADPN production, yielding ~ 26% HMW ADPN (0.59 mg/mL) per hen. Comparative analysis revealed that egg white (EW)-derived hADPN predominantly consisted of hexameric and HMW forms, similar to serum-derived hADPN. In contrast, hADPN obtained from human embryonic kidney (HEK) 293 and High-Five (Hi-5) cells also exhibited the presence of trimers, indicating variability across different production systems. Furthermore, transcriptional expression analysis of ADPN multimerization-associated endoplasmic reticulum chaperone genes (Ero1-Lα, DsbA-L, ERP44, and PDI) indicated upregulation in the oviduct magnum of ADPN KI hens, suggesting the chicken oviduct magnum as the optimal site for HMW ADPN production. Lastly, the functional analysis demonstrated that EW-derived hADPN significantly reduced lipid droplets and downregulated lipid accumulation-related genes (LOX-1, AT1R, FAS, and FABP4) in human umbilical vein endothelial cells (HUVECs). CONCLUSION: In summary, stable and functional multimeric hADPN can be produced in genome-edited chickens even after generations. This highlights the potential of using chicken bioreactor for producing various high-value proteins.

Development of PCR-based markers for identification of wheat HMW glutenin Glu-1Bx and Glu-1By alleles.

BACKGROUND: In common wheat (Triticum aestivum L.), allelic variations in the high-molecular-weight glutenin subunits Glu-B1 locus have important effects on grain end-use quality. The Glu-B1 locus consists of two tightly linked genes encoding x- and y-type subunits that exhibit highly variable frequencies. However, studies on the discriminating markers of the alleles that have been reported are limited. Here, we developed 11 agarose gel-based PCR markers for detecting Glu-1Bx and Glu-1By alleles. RESULTS: By integrating the newly developed markers with previously published PCR markers, nine Glu-1Bx locus alleles (Glu-1Bx6, Glu-1Bx7, Glu-1Bx7*, Glu-1Bx7 OE, Glu-1Bx13, Glu-1Bx14 (-) , Glu-1Bx14 (+)/Bx20, and Glu-1Bx17) and seven Glu-1By locus alleles (Glu-1By8, Glu-1By8*, Glu-1By9, Glu-1By15/By20, Glu-1By16, and Glu-1By18) were distinguished in 25 wheat cultivars. Glu-1Bx6, Glu-1Bx13, Glu-1Bx14 (+)/Bx20, Glu-1By16, and Glu-1By18 were distinguished using the newly developed PCR markers. Additionally, the Glu-1Bx13 and Glu-1Bx14 (+)/Bx20 were distinguished by insertions and deletions in their promoter regions. The Glu-1Bx6, Glu-1Bx7, Glu-1By9, Glu-1Bx14 (-), and Glu-1By15/By20 alleles were distinguished by using insertions and deletions in the gene-coding region. Glu-1By13, Glu-1By16, and Glu-1By18 were dominantly identified in the gene-coding region. We also developed a marker to distinguish between the two Glu-1Bx14 alleles. However, the Glu-1Bx14 (+) + Glu-1By15 and Glu-1Bx20 + Glu-1By20 allele combinations could not be distinguished using PCR markers. The high-molecular-weight glutenin subunits of wheat varieties were analyzed by ultra-performance liquid chromatography and sodium dodecyl sulfate-polyacrylamide gel electrophoresis, and the findings were compared with the results of PCR analysis. CONCLUSIONS: Seven Glu-1Bx and four Glu-1By allele detection markers were developed to detect nine Glu-1Bx and seven Glu-1By locus alleles, respectively. Integrating previously reported markers and 11 newly developed PCR markers improves allelic identification of the Glu-B1 locus and facilitates more effective analysis of Glu-B1 alleles molecular variations, which may improve the end-use quality of wheat.

Rapid analysis of wheat gluten composition using a triple ELISA.

BACKGROUND: Gluten composition is an important quality parameter of wheat flour. Reversed-phase high-performance liquid chromatography (RP-HPLC) is a state-of-the-art method for its analysis. As this is a very labour-intensive and time-consuming procedure, alternative faster methods are desirable. Enzyme-linked immunosorbent assay (ELISA) is a high-throughput method often used for the analysis of gluten traces in gluten-free products. In this proof-of-principle study, we introduce an experimental triple ELISA for the relative quantitation of gliadins, high-molecular-weight glutenin subunits (HMW-GS) and low-molecular-weight glutenin subunits (LMW-GS) of one wheat flour extract. RESULTS: The results of 80 common wheat flour samples obtained from the triple ELISA and RP-HPLC were correlated. The results for gliadins (r = 0.69) and HMW-GS (r = 0.81) showed a medium and high correlation, respectively. Only a very weak correlation of ELISA and RP-HPLC results was observed for LMW-GS (r = 0.49). Results for glutenins (r = 0.69) and gluten (r = 0.72) had a medium correlation. The gliadin/glutenin ratio (r = 0.47) and LMW-GS/HMW-GS ratio (r = 0.40) showed a weak or no correlation. The gliadin, LMW-GS and gluten contents were lower and the HMW-GS content was higher in the ELISA measurement compared to RP-HPLC. CONCLUSION: The quantitation of gliadins and HMW-GS by the experimental triple ELISA showed comparable results to RP-HPLC, whereas no strong correlation between the results from the two methods was found for LMW-GS. Overall, the experimental triple ELISA is suitable for relative gluten quantitation, especially for the analysis of large sample sets. Further work will focus on improving the experimental procedure of the ELISA. © 2024 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Isolation and purification of high molecular weight adiponectin from human plasma fraction.

Adiponectin, a crucial protein hormone originating from adipose tissue, regulates key metabolic processes, including lipid metabolism, mitochondrial activity, and insulin sensitivity. These pleiotropic roles of adiponectin, along with its inverse correlation with metabolic disorders such as obesity, type II diabetes, and atherosclerosis, establish this protein as a potential therapeutic target. However, due to this complexity, challenges have arisen in its production with a natural conformation in bacterial or mammalian expression systems, hindering clinical translation. Furthermore, while inducers for adiponectin secretion or chemical agonists targeting adiponectin receptors have shown promise in laboratory settings, clinical studies with these agents have not yet been conducted. This study proposes a method for isolating and purifying natural high molecular weight (HMW) adiponectin from discarded plasma fractions during the conventional pharmaceutical protein manufacturing process. The process involved Cohn-Oncley fractionation, initial chromatography using reduced cellufine formyl, and subsequent purification via DEAE Sepharose chromatography. Characterization involved gel electrophoresis and biological assays on a hepatocyte cell-line. The purification process effectively captured adiponectin from the I + III paste, demonstrating that this fraction contained a significant portion of total plasma adiponectin. The two-step chromatography led to highly purified HMW adiponectin, confirmed by native-PAGE showing a 780 kDa multimeric complex. Biological assessments demonstrated normal downstream signaling, with HMW adiponectin inducing AMPK phosphorylation. This study demonstrates the feasibility of obtaining purified HMW adiponectin by repurposing plasma fractionation processes. It offers a promising avenue for the HMW adiponectin production, tapping into HMW adiponectin's therapeutic potential against metabolic disorders while optimizing plasma resource utilization in healthcare.

Polymer Physics behind the Gel-Spinning of UHMWPE Fibers.

Gel-spinning of ultra-high molecular weight polyethylene (UHMWPE) fibers has attracted great interest in academia and industry since its birth and commercialization in the 1980s, due to unique properties such as high modulus, low density, and excellent chemical resistance. However, the high viscosity and long relaxation time greatly complicate processing. In industry, solvents, like decalin and paraffin oil, usually disentangle the physical networks and promote final drawability. From extruding the polymer solution to post-solid-stretching, many polymer physics problems that accompany high-modulus fiber gel-spinning should be understood and addressed. In this review, by detailed discussions about the effect of entanglements and intracrystalline chain dynamics on the mechanical properties of UHMWPE, theoretical descriptions of the structure formation of disentangled UHMWPE crystals, and the origin of high modulus and strength of final fibers are provided. Several physical intrinsic key factors are also discussed, revealing why UHMWPE is an ideal material for producing high-performance fibers.

Viscoelastic high-molecular-weight hyaluronic acid hydrogels support rapid glioblastoma cell invasion with leader-follower dynamics.

Hyaluronic acid (HA), the primary component of brain extracellular matrix, is increasingly used to model neuropathological processes, including glioblastoma (GBM) tumor invasion. While elastic hydrogels based on crosslinked low-molecular-weight (LMW) HA are widely exploited for this purpose and have proven valuable for discovery and screening, brain tissue is both viscoelastic and rich in high-MW (HMW) HA, and it remains unclear how these differences influence invasion. To address this question, hydrogels comprised of either HMW (1.5 MDa) or LMW (60 kDa) HA are introduced, characterized, and applied in GBM invasion studies. Unlike LMW HA hydrogels, HMW HA hydrogels relax stresses quickly, to a similar extent as brain tissue, and to a greater extent than many conventional HA-based scaffolds. GBM cells implanted within HMW HA hydrogels invade much more rapidly than in their LMW HA counterparts and exhibit distinct leader-follower dynamics. Leader cells adopt dendritic morphologies, similar to invasive GBM cells observed in vivo. Transcriptomic, pharmacologic, and imaging studies suggest that leader cells exploit hyaluronidase, an enzyme strongly enriched in human GBMs, to prime a path for followers. This study offers new insight into how HA viscoelastic properties drive invasion and argues for the use of highly stress-relaxing materials to model GBM.

Mechanism insights into hydrothermal-activated tannic acid (TA) for simultaneously sewage sludge deep dewatering and antibiotics removal.

Tannic acid (TA) aided hydrothermal treatment (HT) can decrease effective HT temperatures for sludge deep dewatering by chelator protein, but faces notable and economic challenges including the failure to remove antibiotics and the limited protein binding capacity. Herein, hydrothermally activated TA (in situ TA + HT) was conducted to simultaneously improve sludge dewaterability and antibiotic (tetracycline (TC), oxytetracycline (OTC), norfloxacin (NOR), ofloxacin (OFL)) removal. Compared to traditional HT and HT + TA treatment, the in-situ TA + HT process could further strengthen the TA-aided HT efficacy in enhancing sludge and reducing the protein content in the filtrate simultaneously; in which the optimal HT temperature for the dewatering of the sludge was reduced from 180 °C to 140 °C. Furthermore, the total removal efficiency of target antibiotics was achieved at more than 71.0-94.7% for TC and OTC, and 72.0-84.8% for NOR and OFL. The highly reactive species (·OH) generation and the electron transfer efficiency from the hydrothermal-activated TA process were responsible for the elimination of antibiotics and promoted the hydrolyzation and mineralization of HMW protein in sludge during the HT process. Meanwhile, the degradation of HMW proteins and the destruction of the secondary structure of these proteins resulted in improved hydrophobicity and dewaterability of sludge. Hydrothermally activated TA induces covalent binding with the protein. As a result, hydrothermal-activated TA could promote the removal of antibiotics and proteinaceous compounds from the sludge samples, improving the hydrophobicity of sludge and releasing bound water from the sludge flocs during HT. Finally, the cost of hydrothermal-activated TA was 66.51% lower than that of thermal drying treatment. This study not only proposed an effective method to improve traditional HT for sludge thermal dry-free treatment, but also provided new information on the catalysis roles of polyphenols in the hydrothermal conversion of sludge.

Investigating the Impact Behavior of Carbon Fiber/Polymethacrylimide (PMI) Foam Sandwich Composites for Personal Protective Equipment.

To improve the shock resistance of personal protective equipment and reduce casualties due to shock wave accidents, this study prepared four types of carbon fiber/polymethacrylimide (PMI) foam sandwich panels with different face/back layer thicknesses and core layer densities and subjected them to quasi-static compression, low-speed impact, high-speed impact, and non-destructive tests. The mechanical properties and energy absorption capacities of the impact-resistant panels, featuring ceramic/ultra-high molecular-weight polyethylene (UHMWPE) and carbon fiber/PMI foam structures, were evaluated and compared, and the feasibility of using the latter as a raw material for personal impact-resistant equipment was also evaluated. For the PMI sandwich panel with a constant total thickness, increasing the core layer density and face/back layer thickness enhanced the energy absorption capacity, and increased the peak stress of the face layer. Under a constant strain, the energy absorption value of all specimens increased with increasing impact speed. When a 10 kg hammer impacted the specimen surface at a speed of 1.5 m/s, the foam sandwich panels retained better integrity than the ceramic/UHMWPE panel. The results showed that the carbon fiber/PMI foam sandwich panels were suitable for applications that require the flexible movement of the wearer under shock waves, and provide an experimental basis for designing impact-resistant equipment with low weight, high strength, and high energy absorption capacities.