Widespread occurrence of glyphosate and aminomethylphosphonic acid in indoor dust from urban homes across the United States and its contribution to human exposure.

Glyphosate is the most widely used herbicide worldwide, with concerns over human exposure and potential health risks. Nevertheless, little is known about the sources of human exposure to glyphosate and its degradation product, aminomethylphosphonic acid (AMPA). In this study, we measured glyphosate and AMPA in 99 indoor dust samples collected from urban homes in sixteen states in the USA. Glyphosate and AMPA were detected in all samples at geometric mean (GM) concentrations of 193 and 30.8 ng/g, respectively. We found a strong and significant positive correlation between glyphosate and AMPA concentrations (r = 0.70, p < 0.01), indicating that the latter mainly originated from glyphosate. The concentrations of glyphosate (r = 0.40, p < 0.01) and AMPA (r = 0.33, p < 0.01) in indoor dust were significantly correlated with the county-wide agricultural usage of this herbicide. Human exposure to glyphosate and AMPA through dust ingestion were in the ranges of 0.05-0.85 and 0.01-0.14 ng/kg body weight (BW)/day, respectively, for various age groups, which were more than two orders of magnitude below the acceptable daily intake for glyphosate (500 µg/kg BW/day). Further studies are needed to identify the sources and health outcomes of human exposure to glyphosate.

Application of pattern deconvolution strategies for the estimation of bromochloro alkane concentrations in indoor dust samples.

Bromochloro alkanes (BCAs) are a class of flame retardants similar in structure to polychlorinated alkanes (PCAs), which are the major component of short-chain chlorinated paraffins (SCCPs) listed as Persistent Organic Pollutants under the Stockholm Convention. BCAs have recently been detected for the first time in environmental samples. Due to the complete lack of commercially available analytical standards, no method for quantifying BCAs has been reported to date. In this study, 16 custom-synthesised standards with mixed bromine and chlorine halogenation and carbon chain lengths ranging from C10 to C17 were characterized by liquid chromatography and Orbitrap high-resolution mass spectrometry and used to assess the applicability of pattern deconvolution quantification strategies for BCAs in indoor dust. Br1-9 and Cl1-8 BCAs were detected as [M + Cl]- adduct ions among the C10 to C17 standards, as well as numerous PCA homologues. After applying correction factors to account for the presence of PCAs in the standards, triplicate fortification experiments using varied halogenation composition and concentration determined an average measurement accuracy of 81% over the carbon chain lengths studied and coefficient of variance ≤20% between replicates. Overall, approximately 89% of the ΣBCA concentrations quantified in the fortification trials met the European Union Reference Laboratory's accuracy acceptability criteria recommended for PCAs, between 50 and 150%. Application of the BCA pattern deconvolution quantification procedure to seven representative indoor dust samples from the United States of America revealed a low correlation between the homologue distribution in the samples and the prototype standards (R2 ≤ 0.40), which precluded reliable quantification. This study indicates that pattern deconvolution is an appropriate strategy for quantifying BCAs in environmental samples, but that a large set of appropriate mixture standards will be required before more reliable estimates of BCA concentrations can be achieved in indoor dust.

Exposure Assessment of Benzotriazole Ultraviolet Absorbers in Plastic Sports Field Dust and Indoor Dust: Are Plastic Sports Fields High Exposure Scenarios?

Benzotriazole ultraviolet absorbers (BUVs), as emerging contaminants of extensive use, especially in plastic sports fields, have aroused increasing concern due to their potential human and environmental impacts. However, BUV exposure from plastic sports field dust is still unknown. This study compared BUVs in plastic sports field dust and indoor dust for the first time. The order of the geometric mean concentrations of the total BUVs (ΣBUVs) in plastic sports field dust was indoor badminton courts (11023 ng g-1) > basketball courts (4777 ng g-1) > plastic tracks (3779 ng g-1) > synthetic turf (1920 ng g-1) > tennis courts (689 ng g-1). The geometric mean concentrations of ΣBUVs in indoor dust (1150 ng g-1) were lower than those in most plastic sports field dust. The dominant BUV was 2-hydroxy-4-(octyloxy)benzophenone (UV-531) in plastic sports field dust, while 2,2'-methylenebis[4-(1,1,3,3-tetramethylbutyl)-6-2H-benzotriazole-2-yl)phenol] (UV-360) was the dominant BUV in indoor dust. Releases from plastic track materials, sneaker soles, and friction between them might be important BUV sources in plastic track dust. The average estimated daily intakes of ΣBUVs from plastic sports field dust for general exercisers were lower than those from indoor dust, but those for exercisers with long time or professional athletes might be higher, potentially posing health risks.

Assessment of air quality in the Philadelphia, Pennsylvania subway.

BACKGROUND: Subways are popular and efficient modes of transportation in cities. However, people are exposed to high levels of particulate matter (PM) in subways. Subway air quality in the United States has been investigated in a few cities, but data is lacking on simultaneous measurement of several pollutants, especially ultrafine particles (UFP) and black carbon (BC), in combination with different size fractions of PM. OBJECTIVES: The goals of this study are to assess air quality in a belowground subway and compare it with outdoor ambient levels, to examine temporal variability of PM in the subway, and to analyze the correlation between PM and BC. METHODS: Particulate matter of varying sizes (PM1, PM2.5, PM10), UFP, and BC were measured using DustTrak, nanoparticle detector, and micro aethalometer, respectively. Measurements were made at the belowground subway platform and the aboveground street level at 15th Street subway station in Philadelphia during summer 2022. RESULTS: Belowground mean PM1, PM2.5, and PM10 were 112.2 ± 61.3 µg/m3, 120 ± 65.5 µg/m3, and 182.1 ± 132 µg/m3, respectively, which were 5.4, 5.7, and 7.6 times higher than the respective aboveground street levels. The UFP lung deposited surface area (LDSA) (59.4 ± 36.2 µm2/cm3) and BC (9.5 ± 5.4 µg/m3) belowground were 1.7 times and 10.7 times higher than the aboveground. The pollutant concentration varied from day-to-day on both the locations. A higher positive correlation was found between the belowground BC and PM2.5 (r = 0.51, p < 0.05) compared to the aboveground (r = 0.16, p < 0.05). IMPACT: This study showed high levels of particulate matter exposure at a belowground subway station in Philadelphia. Particulate matter levels were about 5 to 8 times higher at belowground subway station than the corresponding aboveground street level. Higher levels were also observed for UFP lung deposited surface area (LDSA), while black carbon levels showed the highest concentration at the belowground level by a factor of ten compared to the aboveground level. The study shows the need for air quality management at belowground subways to reduce particulate matter exposure for the commuters.

Gas-phase and air-solid interface behavior of phthalate plasticizer and ozone: The influence of indoor mineral dust.

Indoor environments serve as reservoirs for a variety of emerging pollutants (EPs), such as phthalates (PAE), with intricate interactions occurring between these compounds and indoor oxidants alongside dust particles. However, the precise mechanisms governing these interactions and their resulting environmental implications remain unclear. By theoretical simulations, this work uncovers multi-functional compounds and high oxygen molecules as important products arising from the interaction between DEP/DEHP and O3, which are closely linked to SOA formation. Further analysis reveals a strong affinity of DEP/DEHP for mineral dust surfaces, with an adsorption energy of 22.11/30.91 kcal mol-1, consistent with a higher concentration of DEHP on the dust surface. Importantly, mineral particles are found to inhibit every step of the reaction process, albeit resulting in lower product toxicity compared to the parent compounds. Thus, timely removal of dust in an indoor environment may reduce the accumulation and residue of PAEs indoors, and further reduce the combined exposure risk produced by PAEs-dust. This study aims to enhance our understanding of the interaction between PAEs and SOA formation, and to develop a fundamental reaction model at the air-solid surface, thereby shedding light on the microscopic behaviors and pollution mechanisms of phthalates on indoor dust surfaces.

Occurrence and human risk assessment of pharmaceutically active compounds (PhACs) in indoor dust from homes, schools and offices.

This study investigates the current situation and possible health risks due to pharmaceutically active compounds (PhACs) including analgesics, antibiotics, antifungals, anti-inflammatories, psychiatric and cardiovascular drugs, and metabolites, in indoor environments. To achieve this objective, a total of 85 dust samples were collected in 2022 from three different Spanish indoor environments: homes, classrooms, and offices. The analytical method was validated meeting SANTE/2020/12830 and SANTE/12682/2019 performance criteria. All indoor dust samples except one presented at least one PhAC. Although concentration levels ranged from < LOQ to 18 µg/g, only acetaminophen, thiabendazole, clotrimazole, and anhydroerythromycin showed quantification frequencies (Qf %) above 19% with median concentrations of 166 ng/g, 74 ng/g, 25 ng/g and 14 ng/g, respectively. The PhAC distribution between dust deposited on the floor and settled on elevated (> 0.5 m) surfaces was assessed but no significant differences (p > 0.05, Mann-Whitney U-test) were found. However, concentrations quantified at the three types of locations showed significant differences (p < 0.05, Kruskal-Wallis H-test). Homes turned out to be the indoor environment with higher pharmaceutical concentrations, especially acetaminophen (678 ng/g, median). The use of these medicines and their subsequent removal from the body were identified as the main PhAC sources in indoor dust. Relationships between occupant habits, building characteristics, and/or medicine consumption and PhAC concentrations were studied. Finally, on account of concentration differences, estimated daily intakes (EDIs) for inhalation, ingestion and dermal adsorption exposure pathways were calculated for toddlers, adolescents and adults in homes, classrooms and offices separately. Results proved that dust ingestion is the main route of exposure, contributing more than 99% in all indoor environments. Moreover, PhAC intakes for all studied groups, at occupational locations (classrooms and offices) are much lower than that obtained for homes, where hazard indexes (HIs) obtained for acetaminophen (7%-12%) and clotrimazole (4%-7%) at the worst scenario (P95) highlight the need for continuous monitoring.

Phthalate monoesters accumulation in residential indoor dust and influence factors.

Phthalate monoesters (mPAEs) possess biological activity that matches or even exceeds that of their parent compounds, phthalate esters (PAEs), negatively impacting humans. Indoor dust is the main carrier of indoor pollutants. In this study, indoor dust samples were collected from 46 households in Changchun City, Jilin Province, in May 2019, and particulate and flocculent fibrous dust was used as the research target to analyze the concentration and compositional characteristics of mPAEs, primary metabolites of five significant PAEs. The influence of factors such as architectural features and living habits in residential areas on exposure to mPAEs was explored. Ten suspected enzyme genes along with two metabolic pathways with the ability to degrade PAEs were screened using PICRUSt2. The results showed that the total concentrations of the five mPAEs in the indoor dust samples were particulate dust (11.49-78.69 µg/g) and flocculent fibrous dust (21.61-72.63 µg/g), respectively. The molar concentration ratio (RC) of mPAEs to corresponding PAEs significantly differed among chemicals, with MMP/DMP and MEP/DEP sporting the highest RC values. Different bacterial types have shown distinct influences against mPAEs and PAEs. Enzyme function and metabolic pathway abundance had a significant effect on the concentration of some mPAEs, mPAEs are most likely derived from microbial degradation of PAEs.

Bisphenol S and Its Chlorinated Derivatives in Indoor Dust and Human Exposure.

Bisphenol S (BPS), an environmental endocrine disruptor, has been identified in global environmental matrices. Nevertheless, limited studies have investigated the presence of chlorinated analogues of BPS (Clx-BPSs) with potential estrogenic activities in environmental matrices. In this study, the occurrence of BPS and five types of Clx-BPSs was characterized in indoor dust (n = 178) from Hangzhou City. BPS was measurable in 94% of indoor dust samples, with an average level of 0.63 µg/g (

Conjugated metabolites of bisphenol A and bisphenol S in indoor dust, outdoor dust, and human urine.

Bisphenol A (BPA) and bisphenol S (BPS) have been widely spread in the global environment. However, for conjugated BPA and BPS metabolites, limited studies have investigated their occurrence in environmental matrices. We collected paired indoor and outdoor dust (n = 97), as well as human urine (n = 153) samples, from residential houses in Quzhou, China, and measured these samples for 8 conjugated BPA and BPS metabolites. Three BPA metabolites were found in collected indoor and outdoor dust, with BPA sulfate (mean 0.75 and 1.3 ng/g, respectively) and BPA glucuronide (0.13 and 0.26 ng/g) being more abundant. BPA conjugates accounted for a mean of 42 and 56% of total BPA (sum of conjugated BPA and BPA metabolites) in indoor and outdoor dust, respectively. BPS sulfate (mean 0.29 and 0.82 ng/g, respectively) had consistently higher concentrations than BPS glucuronide (0.13 and 0.27 ng/g) in indoor and outdoor samples. BPS conjugates contributed a mean 32% and 45% of total BPS (sum of BPS and BPS metabolites) in indoor and outdoor dust, respectively. Moreover, conjugated BPA and BPS metabolites in indoor or outdoor dust were not significantly correlated with those in urine from residents. Overall, this study first demonstrates the wide presence of conjugated BPA and BPS metabolites, besides BPA and BPS, in indoor and outdoor dust. These data are important for elucidating the sources of conjugated BPA and BPS metabolites in the human body.

Nail salon dust reveals alarmingly high photoinitiator levels: Assessing occupational risks.

Photoinitiators (PIs) are chemical additives that generate active substances, such as free radicals to initiate photopolymerization. Traditionally, polymerization has been considered a green technique that seldomly generates contaminants. However, many researches have confirmed toxicity effects of PIs, such as carcinogenicity, cytotoxicity, endocrine disrupting effects. Surprisingly, we found high levels of PIs in indoor dust. Our analysis revealed comparable levels of PIs in dust from printing shops (geometric mean, GM: 1.33 ×103 ng/g) and control environments (GM: 874 ng/g), underscoring the widespread presence of PIs across various settings. Alarmingly, in dust samples from nail salons, PIs were detected at total concentrations ranging from 610 to 1.04 × 107 ng/g (GM: 1.87 ×105 ng/g), significantly exceeding those in the control environments (GM: 1.43 ×103 ng/g). Nail salon workers' occupational exposure to PIs through dust ingestion was estimated at 4.86 ng/kg body weight/day. Additionally, an in vitro simulated digestion test suggested that between 10 % and 42 % of PIs present in ingested dust could become bioaccessible to humans. This is the first study to report on PIs in the specific environments of nail salons and printing shops. This study highlights the urgent need for public awareness regarding the potential health risks posed by PIs to occupational workers, marking an important step towards our understanding of environmental pollution caused by PIs.

Phthalate alternatives and their monoesters in indoor dust from several regions, China and implications for human exposure.

Household products, in response to regulations, increasingly incorporate phthalate (PAE) alternatives instead of traditional PAEs. However, limited information exists regarding the fate and exposure risk of these PAE alternatives and their monoesters in indoor environments. The contamination levels of PAE alternatives and their monoesters in indoor dust might vary across regions due to climate, population density, industrial activities, and interior decoration practices. By analyzing indoor dust samples from six geographical regions across China, this study aims to shed light on concentrations, profiles, and human exposure to 12 PAE alternatives and 9 their monoesters. Bis(2-ethylhexyl) benzene-1,4-dicarboxylate (DEHTP), tributyl 2-acetyloxypropane-1,2,3-tricarboxylate (ATBC), and tris(2-ethylhexyl) benzene-1,2,4-tricarboxylate (TOTM) were the main PAE alternatives in dust across all regions. The total concentrations of 12 PAE alternatives ranged from 0.125 to 4160 µg/g in indoor dust. High molecular weight PAE alternatives had significantly correlated concentrations (p < 0.05) based on Spearman analysis, suggesting their co-use in heat-resistant plastic products. A collective of nine monoesters were identified in most samples, with total concentrations ranging from 0.048 to 29.6 µg/g. The median concentrations of PAE alternatives were highest in North China (66.8 µg/g), while those of monoesters were highest in Southwest China (6.93 µg/g). A significant correlation (p < 0.05) between the concentrations of DEHTP and its monoester suggested that degradation could be a potential source of monoesters. Although hazard quotients (HQs) have been calculated to suggest that the current exposure is unlikely to pose a significant health risk, the lack of toxicity threshold data and the existence of additional exposure pathways necessitate a further confirmation.

A systematic review of global distribution, sources and exposure risk of phthalate esters (PAEs) in indoor dust.

Phthalate esters (PAEs) are a class of plasticizers that are readily released from plastic products, posing a potential exposure risk to human body. At present, much attention is paid on PAE concentrations in indoor dust with the understanding of PAEs toxicity. This study collected 8187 data on 10 PAEs concentrations in indoor dusts from 26 countries and comprehensively reviewed the worldwide distribution, influencing factors, and health risks of PAEs. Di-(2-ethylhexyl) phthalate (DEHP) is the predominant PAE with a median concentration of 316 µg·g-1 in indoor dust. Polyvinyl chloride wallpaper and flooring and personal care products are the main sources of PAEs indoor dust. The dust concentrations of DEHP show a downward trend over the past two decades, while high dust concentrations of DiNP are found from 2011 to 2016. The median dust contents of 8 PAEs in public places are higher than those in households. Moreover, the concentrations of 9 PAEs in indoor dusts from high-income countries are higher than those from upper-middle-income countries. DEHP in 69.8% and 77.8% of the dust samples may pose a potential carcinogenic risk for adults and children, respectively. Besides, DEHP in 16.9% of the dust samples may pose a non-carcinogenic risk to children. Nevertheless, a negligible risk was found for other PAEs in indoor dust worldwide. This review contributes to an in-depth understanding of the global distribution, sources and health risks of PAEs in indoor dust.

AhR agonists screening and identification in indoor dust based on non-target chemical analysis by GC-Q-TOFMS and biological effect evaluation referring to ToxCast/Tox21 database.

Numerous studies reported the concentration of agonists of aryl hydrocarbon receptor (AhR) in indoor dust by target chemical analysis or the biological effects of activating the AhR by indoor extracts, but the major AhR agonists identification in indoor dust were rarely researched. In the present study, the indoor dust samples were collected for 7-ethoxyresorufin O-deethylase (EROD) assay and both non-targeted and targeted chemical analysis for AhR agonists by gas chromatography quadrupole time-of-flight mass spectrometry and gas chromatography-mass spectrometry analysis. Coupled with non-targeted analysis and toxicity Forecaster (ToxCast)/Tox21 database, 104 ToxCast chemicals were screened to be able to induce EROD response. The combination of targeted chemical analyses and biological effects evaluation indicated that PAHs, dibutyl phthalate (DBP) and Cypermethrin might be the important AhR-agonists in different indoor dust and mainly contributed in 1.84%-97.56 % (median: 26.62%) of total observed biological effects through comparing toxic equivalency quotient derived from chemical analysis with biological equivalences derived from bioassay. DBP and cypermethrin seldom reported in the analysis of AhR agonists should raise great concern. In addition, the present results in experiment of synthetic solution of 4 selected AhR-agonists pointed out that some unidentified AhR agonists existed in indoor dust.

Microplastics suspended in dust from different indoor environments in Barranquilla, Colombia: Predominant microparticles?

Considering that microplastics (MPs) are classified as ubiquitous pollutants, that air quality affects human health, and that people remain indoors most of the time, the need has arisen to evaluate the exposure to MPs within the suspended dust in indoor environments. With this objective, the present study carried out passive sampling to analyze the precipitation of microparticles in some indoor residential environments (2 apartments) and workplaces (an office, a pastry shop, a gift shop, and a paint shop) in Barranquilla, Colombia. The quantification and physical characterization of microparticles were carried out under a stereomicroscope, and the chemical characterization was carried out by infrared microspectroscopy (µFTIR). The highest average concentration of MPs in the apartments was found in the air-conditioned rooms (1.1 × 104 MP/m2/day), and concerning the workplaces, the gift shop and the paint shop were the spaces with a higher proportion of MPs (6.0-6.1 × 103 MP/m2/day), with polyesters being the main synthetic polymers, but being semi-synthetic particles the predominant among the samples. Regarding its morphology, fibers were the most abundant shape (>90%), grouping mainly in the 1000-5000 µm range, while the few fragments found were mostly grouped below 50 µm. Exposure by inhalation of MPs in adults was estimated between 1.7 × 102-1.6 × 103 MP/kg/day, while by ingestion it ranged between 2.7 × 102-2.4 × 103 MPs/kg/day. On the other hand, within our research, a significant presence of non-plastic microparticles was found, which reached up to 69% in analyzed samples, corresponding mainly to cotton and cellulose, so we suggest that these should also be included in future studies that aim to estimate potential health implications from exposure to suspended micropollutants.

Global quantification of emerging and legacy per- and polyfluoroalkyl substances in indoor dust: Levels, profiles and human exposure.

This study investigated the occurrence and distribution of per- and polyfluoroalkyl substances (PFASs) in house dust samples from six regions across four continents. PFASs were detected in all indoor dust samples, with total median concentrations ranging from 17.3 to 197 ng/g. Among the thirty-one PFAS analytes, eight compounds, including emerging PFASs, exhibited high detection frequencies in house dust from all six locations. The levels of PFASs varied by region, with higher concentrations found in Adelaide (Australia), Tianjin (China), and Carbondale (United States, U.S.). Moreover, PFAS composition profiles also differed among regions. Dust from Australia and the U.S. contained high levels of 6:2 fluorotelomer phosphate ester (6:2 diPAP), while perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) were predominant in other regions. Furthermore, our results indicate that socioeconomic factors impact PFAS levels. The assessment of human exposure through dust ingestion and dermal contact indicates that toddlers may experience higher exposure levels than adults. However, the hazard quotients of PFASs for both toddlers and adults were below one, indicating significant health risks are unlikely. Our study highlights the widespread occurrence of PFASs in global indoor dust and the need for continued monitoring and regulation of these chemicals.

Liquid crystal monomers (LCMs) in indoor residential dust from Beijing, China: occurrence and human exposure.

Liquid crystal monomers (LCMs) are widely used in electronic devices and emerging as an environmental pollutant, while their occurrence in indoor environments is still less studied. In this study, 32 out of 37 target LCMs were detected in indoor residential dust samples (n = 112) from Beijing, China. Concentrations of Σ32LCMs ranged from 17.8 to 197 ng/g, with a median value of 54.7 ng/g. Fluorinated biphenyls and analogs (FBAs) and cyanobiphenyls and analogs (CBAs), with median concentrations of 22.8 and 15.9 ng/g, respectively, were the main kinds of LCMs. Although 32 LCMs can be detected, four monomers with the highest contamination levels contributed to almost 70% of the total LCMs. Spearman correlation analysis found significant correlations among some monomers, which indicated that they might share similar sources in the residential environment. Estimated daily intakes (EDIs) of LCMs via indoor dust for Beijing residents were calculated, and the results showed that dust ingestion and dermal contact were both main intake pathways to LCMs, and younger people may face higher exposure to LCMs. A comparison to the results of China's total diet study showed that EDIs of LCMs via food consumption might be higher than that via dust intake, while health risks caused by exposure of LCMs for the general population, both through food and dust, were insignificant at present.

Assessment of Heavy Metal Contamination in Dust in Vilnius Schools: Source Identification, Pollution Levels, and Potential Health Risks for Children.

The main objective of this study is to thoroughly evaluate the diversity and sources of heavy metals in the school environment. Specifically, this study examines the presence of heavy metals in the dust found and collected from 24 schools in Vilnius. Employing hierarchical cluster analysis, principal component analysis, and positive matrix factorization, we identified combustion-related activities as primary contributors to elevated metal concentrations, notably zinc, scandium, and copper, with PM2.5/PM10 ratios indicating a combustion source. They reveal significant differences in the levels of elements such as arsenic (4.55-69.96 mg/kg), copper (51.28-395.37 mg/kg), zinc, and lead, which are affected by both local environmental factors and human activities. Elevated pollution levels were found in certain school environments, indicating environmental degradation. Pollution assessment and specific element pairings' strong positive correlations suggested shared origins or deposition processes. While this study primarily assesses non-carcinogenic risks to children based on a health risk assessment model, it acknowledges the well-documented carcinogenic potential of substances such as lead and arsenic. The research emphasizes the immediate necessity for efficient pollution management in educational environments, as indicated by the elevated hazard index for substances such as lead and arsenic, which present non-carcinogenic risks to children. This research offers important insights into the composition and origins of dust pollution in schools. It also promotes the need for broader geographic sampling and prolonged data collection to improve our understanding of pollution sources, alongside advocating for actionable strategies such as environmental management and policy reforms to effectively reduce exposure risks in educational settings. Furthermore, it aims to develop specific strategies to safeguard the health of students in Vilnius and similar urban areas.

Digital Surface-Enhanced Raman Spectroscopy-Lateral Flow Test Dipstick: Ultrasensitive, Rapid Virus Quantification in Environmental Dust.

This study introduces a novel surface-enhanced Raman spectroscopy (SERS)-based lateral flow test (LFT) dipstick that integrates digital analysis for highly sensitive and rapid viral quantification. The SERS-LFT dipsticks, incorporating gold-silver core-shell nanoparticle probes, enable pixel-based digital analysis of large-area SERS scans. Such an approach enables ultralow-level detection of viruses that readily distinguishes positive signals from background noise at the pixel level. The developed digital SERS-LFTs demonstrate limits of detection (LODs) of 180 fg for SARS-CoV-2 spike protein, 120 fg for nucleocapsid protein, and 7 plaque forming units for intact virus, all within <30 min. Importantly, digital SERS-LFT methods maintain their robustness and their LODs in the presence of indoor dust, thus underscoring their potential for accurate and reliable virus diagnosis and quantification in real-world environmental settings.

Phenylmethylsiloxanes in indoor dust from residential area of China: Source, occurrence, bioavailability and exposure assessment.

Phenylmethylsiloxanes, as modified products of dimethylsiloxanes, have been used in personal care products (PCPs) and household appliances, with indoor dust serving as one potential reservoir due to their particle-binding properties. This study measured six isomers of two phenylmethylsiloxanes (P3 and P4) in PCPs (99 %) intakes of phenylmethylsiloxanes for adults, while dust ingestion/adsorption (0.19 ng/d) may play important roles for toddlers/infants with little usage of phenylmethylsiloxanes-containing PCPs. Additionally, total daily intakes of PhMeSi(OH)2 (0.30-0.84 ng/d) via ingestion and dermal absorption of dust were higher than P3 (0.06-0.31 ng/d) and P4 (0.02-0.09 ng/d), suggesting exposure risk of degradation product of phenylmethylsiloxanes deserving attention.

Endocrine disrupting potential of total and bioaccessible extracts of dust from seven different types of indoor environment.

Information on the indoor environment as a source of exposure with potential adverse health effects is mostly limited to a few pollutant groups and indoor types. This study provides a comprehensive toxicological profile of chemical mixtures associated with dust from various types of indoor environments, namely cars, houses, prefabricated apartments, kindergartens, offices, public spaces, and schools. Organic extracts of two different polarities and bioaccessible extracts mimicking the gastrointestinal conditions were prepared from two different particle size fractions of dust. These extracts were tested on a battery of human cell-based bioassays to assess endocrine disrupting potentials. Furthermore, 155 chemicals from different pollutant groups were measured and their relevance for the bioactivity was determined using concentration addition modelling. The exhaustive and bioaccessible extracts of dust from the different microenvironments interfered with aryl hydrocarbon receptor, estrogen, androgen, glucocorticoid, and thyroid hormone (TH) receptor signalling, and with TH transport. Noteably, bioaccessible extracts from offices and public spaces showed higher estrogenic effects than the organic solvent extracts. 114 of the 155 targeted chemicals were detectable, but the observed bioactivity could be only marginally explained by the detected chemicals. Diverse toxicity patterns across different microenvironments that people inhabit throughout their lifetime indicate potential health and developmental risks, especially for children. Limited data on the endocrine disrupting potency of relevant chemical classes, especially those deployed as replacements for legacy contaminants, requires further study.