RESUMEN
Iron ore is a fundamental pillar in construction globally, however, its process is highly polluting and deposits are becoming less concentrated, making reusing or reprocessing its sources a sustainable solution to the current industry. A rheological analysis was performed to understand the effect of sodium metasilicate on the flow curves of concentrated pulps. The study was carried out in an Anton Paar MCR 102 rheometer, showing that, in a wide range of dosages, the reagent can reduce the yield stress of the slurries, which would result in lower energy costs for transporting the pulps by pumping. To understand the behavior observed experimentally, computational simulation has been used by means of quantum calculations to represent the metasilicate molecule and the molecular dynamics to study the adsorption of metasilicate on the hematite surface. It has been possible to obtain that the adsorption is stable on the surface of hematite, where increasing the concentration of metasilicate increases its adsorption on the surface. The adsorption could be modeled by the Slips model where there is a delay in adsorption at low concentrations and then a saturated value is reached. It was found that metasilicate requires the presence of sodium ions to be adsorbed on the surface by means of a cation bridge-type interaction. It is also possible to identify that it is absorbed by means of hydrogen bridges, but to a lesser extent than the cation bridge. Finally, it is observed that the presence of metasilicate adsorbed on the surface modifies the net surface charge, increasing it and, thus, generating the effect of dispersion of hematite particles which experimentally is observed as a decrease in rheology.
RESUMEN
The present work synthesized two new materials of functionalized multi-walled carbon nanotubes (MWCNT-OH and MWCNT-COOH) impregnated with magnetite (Fe3O4) using solution precipitation methodology. The resulting MWCNT-OH-Mag and MWCNT-COOH-Mag materials were characterized by scanning electron microscopy coupled with energy dispersion X-ray spectroscopy, Fourier transform infrared, X-ray diffraction, atomic force microscopy, and electrical force microscopy. The characterization results indicate that the -OH functional groups in the MWCNT interact effectively with magnetite iron favoring impregnation and indicating the regular distribution of nanoparticles on the surface of the synthesized materials. The adsorption efficiency of the MWCNT-OH-Mag and MWCNT-COOH-Mag materials was tested using the pollutants 2,4-D and Atrazine. Over batch studies carried out under different pH ranges, it was found that the optimal condition for 2,4-D adsorption was at pH 2, while for Atrazine, it was found at pH 6. The rapid adsorption kinetics of 2,4-D and Atrazine reaches equilibrium within 30 min. The pseudo-first-order model described 2,4-D adsorption well. The General-order model described better atrazine adsorption. The magnetically doped adsorbent functionalized with -OH surface groups (MWCNT-OH-Mag) demonstrated superior adsorption performance and increased Fe-doped sites. The Sips model described the adsorption isotherms accurately. MWCNT-OH-Mag presented the greatest adsorption capacity at 51.4 and 47.7 mg g-1 for 2,4-D and Atrazine, respectively. Besides, electrostatic forces and complexation rule the molecular interactions between metals and pesticides. The leaching and regeneration tests of the synthesized materials indicate high stability in an aqueous solution. Furthermore, experiments with wastewater samples contaminated with the model pollutants indicate that the novel adsorbents are highly promising for enhancing water purification by adsorptive separation.
Asunto(s)
Atrazina , Contaminantes Ambientales , Nanopartículas de Magnetita , Nanotubos de Carbono , Plaguicidas , Contaminantes Químicos del Agua , Adsorción , Nanotubos de Carbono/química , Óxido Ferrosoférrico , Agua , Cinética , Ácido 2,4-Diclorofenoxiacético , Contaminantes Químicos del Agua/química , Concentración de Iones de HidrógenoRESUMEN
Interactions between pesticides (paraquat, glyphosate, 2,4-D, atrazine, and metsulfuron methyl) and soil organic and inorganic components have been studied in batch experiments by performing adsorption, dissolution, and chemical and photochemical degradation under different conditions. The obtained results confirm that the affinity of a pesticide to the solid surface depends on the nature of both and shows that each reactant strongly affects the mobility of the other one, e.g., anionic pesticides promote the dissolution of the solid humic acid but if this last is retained into the inorganic matrix enhances the adsorption of a cationic pesticide. Adsorption also seems to protect the bonded specie to be chemical degraded, such as shown in two pesticide/clay systems at constant pH. The use of mesoporous silicas could result in a good alternative for pesticide remediation. In fact, the solid shows high adsorption capacity towards paraquat and its modification with TiO2 nanoparticles increases not only the pesticide adsorption but also seems to catalyze its degradation under UV light to less-toxic metabolites. UV-VIS spectroscopy was relevant and novel in such sense. Electrostatic interactions, hydrogen and coordinative bonds formations, surface complexations and hydrophobic associations play a key role in the fate of mentioned pesticides on soil and ground/surface water environments.