Collapsing behavior of spark-induced cavitation bubble in rigid tube.

The phenomenon of cavitation within tubes is a common scenario in the fields of medicine and industry. This paper focuses on the effects of rigid circular tube length, diameter and the distance of bubble - tube port on the behavior of bubble in tube. The low-voltage discharge technique was utilized to induce a cavitation bubble in deionized water. The effects of rigid tube lengths, diameters, and bubble-tube port distances on the morphology of bubbles are observed using high-speed camera. It has been found that as the length of the rigid tube increases, so does the period, and this effect is more pronounced in tubes with smaller diameters. Conversely, the cavitation bubble period decreased and then stabilized as the tube diameter increased, the ratio of tube radius and the bubble radius exceeds 4.8, the period of bubble in tube is similar to that of bubble in free field. Further analysis of the influence of tube characteristics on microjets reveals that a pair of oppositely microjets were formed along the tube axis by the bubble near the midpoint of the tube axis. Moreover, when the non-dimensional tube length η < 3.5, the increase tube diameter results in a decrease microjet velocity. It has also been observed that as the bubble gradually approaches the interior of the tube, the velocity of microjets directed inward decreases. Additionally, the smaller the diameter of the tube, the greater the bubble-tube port distance required for the microjets to reach the same level of velocity as bubble near the center of the tube axis. These findings hold theoretical implications for improvement of targeted drug delivery efficiency in medicine and enhance the operational efficiency of inertial micropumps in industries.

Considering agitation in ultrasonic electroplating through observation of cavitation.

Ultrasonic electroplating produces various effects, including refinement of the plating film structure, by generating localized agitation through cavitation bubbles. However, details of the agitation mechanism have not been clarified because ultrasonic cavitation is very small in scale and occurs rapidly, and its reproducibility is low. Therefore, using laser-induced cavitation, which can generate cavitation similar to ultrasonic waves with high reproducibility, the author attempted to elucidate the conditions and frequency of cavitation generation that affect the agitation phenomenon in ultrasonic electroplating. By controlling the laser irradiation position, three different cavitation conditions were established, and the microstructures of the plated films produced were compared. Microstructural refinement was the most advanced under the condition of microjet generation. The frequency of cavitation generation at any position in the ultrasonic electroplating was estimated to be < 1 Hz.

Enzyme-Powered Tubular Microrobotic Jets as Bioinspired Micropumps for Active Transmembrane Drug Transport.

In nature, there exist a variety of transport proteins on cell membranes capable of actively moving cargos across biological membranes, which plays a vital role in the living activities of cells. Emulating such biological pumps in artificial systems may bring in-depth insights on the principles and functions of cell behaviors. However, it poses great challenges due to difficulty in the sophisticated construction of active channels at the cellular scale. Here, we report the development of bionic micropumps for active transmembrane transportation of molecular cargos across living cells that is realized by enzyme-powered microrobotic jets. By immobilizing urease onto the surface of a silica-based microtube, the prepared microjet is capable of catalyzing the decomposition of urea in surrounding environments and generating microfluidic flow through the inside channel for self-propulsion, which is verified by both numerical simulation and experimental results. Therefore, once naturally endocytosed by the cell, the microjet enables the diffusion and, more importantly, active transportation of molecular substances between the extracellular and intracellular ends with the assistance of generated microflow, thus serving as an artificial biomimetic micropump. Furthermore, by constructing enzymatic micropumps on cancer cell membranes, enhanced delivery of anticancer doxorubicin into cells as well as improved killing efficacy are achieved, which demonstrates the effectiveness of the active transmembrane drug transport strategy in cancer treatment. This work not only extends the applications of micro/nanomachines in biomedical fields but also provides a promising platform for future cell biology research at cellular and subcellular scales.

Microfluidic liquid sheets as large-area targets for high repetition XFELs.

The high intensity of X-ray free electron lasers (XFELs) can damage solution-phase samples on every scale, ranging from the molecular or electronic structure of a sample to the macroscopic structure of a liquid microjet. By using a large surface area liquid sheet microjet as a sample target instead of a standard cylindrical microjet, the incident X-ray spot size can be increased such that the incident intensity falls below the damage threshold. This capability is becoming particularly important for high repetition rate XFELs, where destroying a target with each pulse would require prohibitively large volumes of sample. We present here a study of microfluidic liquid sheet dimensions as a function of liquid flow rate. Sheet lengths, widths and thickness gradients are shown for three styles of nozzles fabricated from isotropically etched glass. In-vacuum operation and sample recirculation using these nozzles is demonstrated. The effects of intense XFEL pulses on the structure of a liquid sheet are also briefly examined.

Engineering Active Micro and Nanomotors.

Micro- and nanomotors (MNMs) are micro/nanoparticles that can perform autonomous motion in complex fluids driven by different power sources. They have been attracting increasing attention due to their great potential in a variety of applications ranging from environmental science to biomedical engineering. Over the past decades, this field has evolved rapidly, with many significant innovations contributed by global researchers. In this review, we first briefly overview the methods used to propel motors and then present the main strategies used to design proper MNMs. Next, we highlight recent fascinating applications of MNMs in two examplary fields, water remediation and biomedical microrobots, and conclude this review with a brief discussion of challenges in the field.

Numerical Study of the Micro-Jet Formation in Double Flow Focusing Nozzle Geometry Using Different Water-Alcohol Solutions.

The purpose of this work is to determine, based on the computational model, whether a mixture of a binary liquid is capable of producing longer, thinner and faster gas-focused micro-jets, compared to the mono-constituent liquids of its components. Mixtures of water with two different alcohols, water + ethanol and water + 2-propanol, are considered. The numerical study of pre-mixed liquids is performed in the double flow focusing nozzle geometry used in sample delivery in serial femtosecond crystallography experiments. The study reveals that an optimal mixture for maximizing the jet length exists both in a water + ethanol and in a water + 2-propanol system. Additionally, the use of 2-propanol instead of ethanol results in a 34% jet length increase, while the jet diameters and velocities are similar for both mixtures. Pure ethanol and pure 2-propanol are the optimum liquids to achieve the smallest diameter and the fastest jets. However, the overall aim is to find a mixture with the longest, the smallest and the fastest jet. Based on our simulations, it appears that water + 2-propanol mixture might be slightly better than water + ethanol. This study reveals the dominant effect of liquid viscosity on the jet breakup process in a flow focusing nozzles operated under atmospheric conditions.

Shock Wave Application Increases the Antineoplastic Effect of Molecular Iodine Supplement in Breast Cancer Xenografts.

We evaluated the effect of oral molecular iodine supplementation and shock wave application under three different conditions on human MDA-MB231 cancer cell xenografts. After tumor volume reached 1 cm3, mice were randomly assigned to groups and treated for 3 weeks. The results revealed that high-dose shock wave treatment (150 shock waves at a pressure of 21.7 MPa, SW150/21.7) generated tissue lesions without decreasing tumor growth, canceled the antineoplastic action of iodine and promoted pro-tumor conditions (increased hypoxia-induced factor [HIF] and vascular endothelial growth factor [VEGF]). In contrast, moderate (SW35/21.7) and low (SW35/9.9) doses of shock waves had significant antineoplastic effects and, in combination with iodine supplement, attenuated the aggressiveness of these cells by decreasing expression of the markers of stem cells (CD44 and Sox2) and invasion (HIF and VEGF). These results allow us to propose the combination of shock waves and iodine as a possible adjuvant in breast cancer therapy.

Effect of the Pitot Tube on Measurements in Supersonic Axisymmetric Underexpanded Microjets.

This paper describes the results of methodical investigations of the effect of the Pitot tube on measurements of gas-dynamic parameters of supersonic axisymmetric underexpanded real and model microjets. Particular attention is paid to distortions of Pitot pressure variations on the jet axis associated with the wave structure of the jet and to distortions of the supersonic core length. In experiments with model jets escaping from nozzles with diameters ranging from 0.52 to 1.06 mm into the low-pressure chamber, the measurements are performed by the Pitot tubes 0.05 to 2 mm in diameter. The results are analyzed together with the earlier obtained data for real microjets escaping from nozzles with diameters ranging from 10 to 340 µm where the parameters of real microjets were determined by the Pitot microtube 12 µm in diameter. Interaction of the Pitot tube with an unsteady jet in the laminar-turbulent transition region is investigated; the influence of this interaction on Pitot pressure measurements is determined, and a physical interpretation of this phenomenon is provided.

Shock wave-induced permeabilization of mammalian cells.

Controlled permeabilization of mammalian cell membranes is fundamental to develop gene and cell therapies based on macromolecular cargo delivery, a process that emerged against an increasing number of health afflictions, including genetic disorders, cancer and infections. Viral vectors have been successfully used for macromolecular delivery; however, they may have unpredictable side effects and have been limited to life-threatening cases. Thus, several chemical and physical methods have been explored to introduce drugs, vaccines, and nucleic acids into cells. One of the most appealing physical methods to deliver genes into cells is shock wave-induced poration. High-speed microjets of fluid, emitted due to the collapse of microbubbles after shock wave passage, represent the most significant mechanism that contributes to cell membrane poration by this technique. Herein, progress in shock wave-induced permeabilization of mammalian cells is presented. After covering the main concepts related to molecular strategies whose applications depend on safer drug delivery methods, the physics behind shock wave phenomena is described. Insights into the use of shock waves for cell membrane permeation are discussed, along with an overview of the two major biomedical applications thereof-i.e., genetic modification and anti-cancer shock wave-assisted chemotherapy. The aim of this review is to summarize 30 years of data showing underwater shock waves as a safe, noninvasive method for macromolecular delivery into mammalian cells, encouraging the development of further research, which is still required before the introduction of this promising tool into clinical practice.

Medical Imaging for the Tracking of Micromotors.

Micro/nanomotors are useful tools for several biomedical applications, including targeted drug delivery and minimally invasive microsurgeries. However, major challenges such as in vivo imaging need to be addressed before they can be safely applied on a living body. Here, we show that positron emission tomography (PET), a molecular imaging technique widely used in medical imaging, can also be used to track a large population of tubular Au/PEDOT/Pt micromotors. Chemisorption of an iodine isotope onto the micromotor's Au surface rendered them detectable by PET, and we could track their movements in a tubular phantom over time frames of up to 15 min. In a second set of experiments, micromotors and the bubbles released during self-propulsion were optically tracked by video imaging and bright-field microscopy. The results from direct optical tracking agreed with those from PET tracking, demonstrating that PET is a suitable technique for the imaging of large populations of active micromotors in opaque environments, thus opening opportunities for the use of this mature imaging technology for the in vivo localization of artificial swimmers.

Effect of Electrolyte Concentration on the Stern Layer Thickness at a Charged Interface.

The chemistry and physics of charged interfaces is regulated by the structure of the electrical double layer (EDL). Herein we quantify the average thickness of the Stern layer at the silica (SiO2 ) nanoparticle/aqueous electrolyte interface as a function of NaCl concentration following direct measurement of the nanoparticles' surface potential by X-ray photoelectron spectroscopy (XPS). We find the Stern layer compresses (becomes thinner) as the electrolyte concentration is increased. This finding provides a simple and intuitive picture of the EDL that explains the concurrent increase in surface charge density, but decrease in surface and zeta potentials, as the electrolyte concentration is increased.

Mechanics of collapsing cavitation bubbles.

A brief survey is given of the dynamical phenomena accompanying the collapse of cavitation bubbles. The discussion includes shock waves, microjets and the various ways in which collapsing bubbles produce damage.

Propulsion Mechanism of Catalytic Microjet Engines.

We describe the propulsion mechanism of the catalytic microjet engines that are fabricated using rolled-up nanotech. Microjets have recently shown numerous potential applications in nanorobotics but currently there is a lack of an accurate theoretical model that describes the origin of the motion as well as the mechanism of self-propulsion. The geometric asymmetry of a tubular microjet leads to the development of a capillary force, which tends to propel a bubble toward the larger opening of the tube. Because of this motion in an asymmetric tube, there emerges a momentum transfer to the fluid. In order to compensate this momentum transfer, a jet force acting on the tube occurs. This force, which is counterbalanced by the linear drag force, enables tube velocities of the order of 100 µm/s. This mechanism provides a fundamental explanation for the development of driving forces that are acting on bubbles in tubular microjets.

Tandem shock waves to enhance genetic transformation of Aspergillus niger.

Filamentous fungi are used in several industries and in academia to produce antibiotics, metabolites, proteins and pharmaceutical compounds. The development of valuable strains usually requires the insertion of recombinant deoxyribonucleic acid; however, the protocols to transfer DNA to fungal cells are highly inefficient. Recently, underwater shock waves were successfully used to genetically transform filamentous fungi. The purpose of this research was to demonstrate that the efficiency of transformation can be improved significantly by enhancing acoustic cavitation using tandem (dual-pulse) shock waves. Results revealed that tandem pressure pulses, generated at a delay of 300 µs, increased the transformation efficiency of Aspergillus niger up to 84% in comparison with conventional (single-pulse) shock waves. This methodology may also be useful to obtain new strains required in basic research and biotechnology.

Stimuli-responsive microjets with reconfigurable shape.

Flexible thermoresponsive polymeric microjets are formed by the self-folding of polymeric layers containing a thin Pt film used as catalyst for self-propulsion in solutions containing hydrogen peroxide. The flexible microjets can reversibly fold and unfold in an accurate manner by applying changes in temperature to the solution in which they are immersed. This effect allows microjets to rapidly start and stop multiple times by controlling the radius of curvature of the microjet. This work opens many possibilities in the field of artificial nanodevices, for fundamental studies on self-propulsion at the microscale, and also for biorelated applications.