Facile Preparation of High-Performance Free-Standing Micro-Supercapacitors by Optimizing Oxygen Groups on Graphene.

Free-standing micro-supercapacitor (MSC) devices without substrate or current collectors are promising for practical applications. However, it is still difficult to prepare high-performance free-standing MSC devices because of the requirement of optimized active sites, conductivity, ion diffusion, controlled patterns, moisture susceptibility, etc. Here, it is proposed that the optimization of oxygen level on graphene is promising to solve these requirements because of the balance of sp2 and sp3 hybridization. Using the medium-oxidized graphene, the flexible, conductive, hydro-stable, easy-processing film can be facilely obtained, which facilitates the preparation of free-standing MSC electrodes. After constructing with gel electrolyte, the free-standing MSC device shows a high capacitance of 898.4 mF cm-2 using aqueous-gel electrolyte and 383.6 mF cm-2 using ion-gel electrolyte with mass loading of ca. 10 mg cm-2. Correspondingly, the MSC device can achieve a landmark energy density of 42.6 µWh cm-2 at 0.85 mW cm-2 (7.1 mWh cm-3 at 141.7 mW cm-3). The advantages of high performance, facile preparation, and low inactive components make the free-standing MSC device promising for practical applications.

Electrochemical Performance of Niobium MXenes with Lanthanum.

MXenes are the newest class of two-dimensional nanomaterials characterized by large surface area, high conductivity, and hydrophilicity. To further improve their performance for use in energy storage devices, heteroatoms or functional groups can be inserted into the Mxenes' structure increasing their stability. This work proposes insertion of lanthanum atoms into niobium-MXene (Nb-MX/La) that was characterized in terms of morphogy, structure, and electrochemical behavior. The addition of La to the Nb-MXene structure was essential to increase the spacing between the layers, improving the interaction with the electrolyte and enabling charge/discharge cycling in a higher potential window and at higher current densities. Nb-MX/La achieved a specific capacitance of up to 157 mF cm-2, a specific capacity of 42 mAh cm-2 at 250 mV s-1, a specific power of 37.5 mW cm-2, and a specific energy of 14.1 mWh cm-2 after 1000 charge/discharge cycles at 50 mA cm-2.

Planar Micro-Supercapacitors with High Power Density Screen-Printed by Aqueous Graphene Conductive Ink.

Simple and scalable production of micro-supercapacitors (MSCs) is crucial to address the energy requirements of miniature electronics. Although significant advancements have been achieved in fabricating MSCs through solution-based printing techniques, the realization of high-performance MSCs remains a challenge. In this paper, graphene-based MSCs with a high power density were prepared through screen printing of aqueous conductive inks with appropriate rheological properties. High electrical conductivity (2.04 × 104 S∙m-1) and low equivalent series resistance (46.7 Ω) benefiting from the dense conductive network consisting of the mesoporous structure formed by graphene with carbon black dispersed as linkers, as well as the narrow finger width and interspace (200 µm) originating from the excellent printability, prompted the fully printed MSCs to deliver high capacitance (9.15 mF∙cm-2), energy density (1.30 µWh∙cm-2) and ultrahigh power density (89.9 mW∙cm-2). Notably, the resulting MSCs can effectively operate at scan rates up to 200 V∙s-1, which surpasses conventional supercapacitors by two orders of magnitude. In addition, the MSCs demonstrate excellent cycling stability (91.6% capacity retention and ~100% Coulombic efficiency after 10,000 cycles) and extraordinary mechanical properties (92.2% capacity retention after 5000 bending cycles), indicating their broad application prospects in flexible wearable/portable electronic systems.

Advanced Porous Gold-PANI Micro-Electrodes for High-Performance On-Chip Micro-Supercapacitors.

The downsizing of microscale energy storage devices is crucial for powering modern on-chip technologies by miniaturizing electronic components. Developing high-performance microscale energy devices, such as micro-supercapacitors, is essential through processing smart electrodes for on-chip structures. In this context, we introduce porous gold (Au) interdigitated electrodes (IDEs) as current collectors for micro-supercapacitors, using polyaniline as the active material. These porous Au IDE-based symmetric micro-supercapacitors (P-SMSCs) show a remarkable enhancement in charge storage performance, with a 187% increase in areal capacitance at 2.5 mA compared to conventional flat Au IDE-based devices, despite identical active material loading times. Our P-SMSCs achieve an areal capacitance of 60 mF/cm2, a peak areal energy density of 5.44 µWh/cm2, and an areal power of 2778 µW/cm2, surpassing most reported SMSCs. This study advances high-performance SMSCs by developing highly porous microscale planar current collectors, optimizing microelectrode use, and maximizing capacity within a compact footprint.

Ultra-Wide Interlayered WxMo2xSy Alloy Electrode Patterning through High-Precision Controllable Photonic-Synthesis.

Ultra-thin 2D materials have great potential as electrodes for micro-supercapacitors (MSCs) because of their facile ion transport channels. Here, a high-precision controllable photonic-synthesis strategy that provided 1 inch wafer-scale ultra-thin film arrays of alloyed WxMo2xSy with sulfur vacancies and expanded interlayer (13.2 Å, twice of 2H MoS2) is reported. This strategy regulates the nucleation and growth of transition metal dichalcogenides (TMDs) on the picosecond or even femtosecond scale, which induces Mo-W alloying, interlayer expansion, and sulfur loss. Therefore, the diffusion barrier of WxMo2xSy is reduced, with charge transfer and ion diffusion enhancing. The as-prepared symmetric MSCs with the size of 100 × 100 µm2 achieve ultrahigh specific capacitance (242.57 mF cm-2 and 242567.83 F cm-3), and energy density (21.56 Wh cm-3 with power density of 485.13 W cm3). The established synthesis strategy fits numerous materials, which provides a universal method for the flexible synthesis of electrodes in microenergy devices.

2.4 V ultrahigh-voltage aqueous MXene-based asymmetric micro-supercapacitors with high volumetric energy density toward a self-sufficient integrated microsystem.

Two-dimensional MXenes are key high-capacitance electrode materials for micro-supercapacitors (MSCs) catering to integrated microsystems. However, the narrow electrochemical voltage windows of conventional aqueous electrolytes (≤ 1.23 V) and symmetric MXene MSCs (typically ≤ 0.6 V) substantially limit their output voltage and energy density. Highly concentrated aqueous electrolytes exhibit lower water molecule activity, which inhibits water splitting and consequently widens the operating voltage window. Herein, we report ultrahigh-voltage aqueous planar asymmetric MSCs (AMSCs) based on a highly concentrated LiCl-gel quasi-solid-state electrolyte with MXene (Ti3C2T x ) as the negative electrode and MnO2 nanosheets as the positive electrode (MXene//MnO2-AMSCs). The MXene//MnO2-AMSCs exhibit a high voltage of up to 2.4 V, attaining an ultrahigh volumetric energy density of 53 mWh cm-3. Furthermore, the in-plane geometry and the quasi-solid-state electrolyte enabled excellent mechanical flexibility and performance uniformity in the serially/parallel connected packs of our AMSCs. Notably, the MXene//MnO2-AMSC-based integrated microsystem, in conjunction with solar cells and consumer electronics, could efficiently realize simultaneous energy harvesting, storage, and conversion. The findings of this study provide insights for constructing high-voltage aqueous MXene-based AMSCs as safe and self-sufficient micropower sources in smart integrated microsystems.

High Capacitance Porous Ruthenium Nitride Films with High Rate Capability for Micro-Supercapacitors.

The demand for high-performance energy storage devices to power Internet of Things applications has driven intensive research on micro-supercapacitors (MSCs). In this study, RuN films made by magnetron sputtering as an efficient electrode material for MSCs are investigated. The sputtering parameters are carefully studied in order to maximize film porosity while maintaining high electrical conductivity, enabling a fast charging process. Using a combination of advanced techniques, the relationships among the morphology, structure, and electrochemical properties of the RuN films are investigated. The films are shown to have a complex structure containing a mixture of crystallized Ru and RuN phases with an amorphous oxide layer. The combination of high electrical conductivity and pseudocapacitive charge storage properties enabled a 16 µm-thick RuN film to achieve a capacitance value of 0.8 F cm-2 in 1 m KOH with ultra-high rate capability.

Manufacturing Shape-Controllable Flexible PEDOT/rGO Composite Electrodes for Planar Micro-Supercapacitors.

Flexible electronic products, with their characteristics of flexibility and wearability, have attracted significant attention and have become an important direction in the research and development of the electronics industry. Planar micro-supercapacitors (MSCs) with flexible composite electrodes can provide reliable energy support for these products, propelling their further development. The research employed a quick, effective, and environmentally friendly method of laser scribing to create shape-controllable flexible composite electrodes on composite films of Poly(3,4-ethylenedioxythiophene) and graphene oxide (PEDOT/GO), which were subsequently assembled into MSCs. An analysis of the composite electrode morphology, structure, and elemental distribution was conducted through the utilization of SEM, TEM, and XPS techniques. Following this, a comprehensive evaluation of the electrochemical performance of the flexible MSCs was carried out, which included cyclic voltammetry (CV), galvanostatic charge/discharge (GCD), and assessment of cyclic stability. The analysis of the CV results indicated that the MSCs achieved the areal capacitance of 5.78 mF/cm2 at 5 mV/s. After 5000 cycles at a current density of 0.05 mA/cm2, the capacitance retention rate was 85.4%. The high areal capacitance and strong cycle stability of MSCs highlight the potential of PEDOT/reduced graphene oxide (PEDOT/rGO) electrodes in electrode applications.

Centrifugal-Gravity-Enforced Deposition of MXene Electrodes for High-Performance and Ultrastable Microsupercapacitors.

Two-dimensional (2D) transition metal carbides, known as MXenes, have captured much attention for their excellent electrical conductivity and electrochemical capability. However, the susceptibility of MXenes to oxidation, particularly Ti3C2Tx transforming into titanium dioxide upon exposure to ambient air, hinders their utilization for extended operational life cycles. This work introduces a simple and straightforward method for producing ultrathin MXene electrode films tailored for energy storage applications, employing centrifugal-gravity force. Our approach significantly suppresses the oxidation phenomenon that arises in MXene materials and also effectively prevents the recrystallization of potentially residual LiF during the film formation. Additionally, the utilization of this MXene electrode in an all-solid-state microsupercapacitor (MSC) with an interdigitated pattern demonstrates an exceptionally improved and stable electrochemical performance. This includes a high volumetric capacitance of approximately 467 F cm-3, an energy density of around 65 mWh cm-3, and impressive long-term cycle stability, retaining about 94% capacity after 10 000 cycles. Moreover, a downsized MSC device exhibits remarkable mechanical durability, retaining over 98% capacity even when folded and sustaining stability over extended periods. Therefore, we believe that this study provides valuable insights for advancing highly integrated energy storage devices, ensuring exceptional electrochemical efficiency and prolonged functionality in diverse environments, whether ambient or humid.

Recent Progress and Challenges in Paper-Based Microsupercapacitors for Flexible Electronics: A Comprehensive Review.

Recent advances in paper-based microsupercapacitors (p-MSCs) have attracted significant attention due to their potential as substrates for flexible electronics. This review summarizes progress in the field of p-MSCs, discussing their challenges and prospects. It covers various aspects, including the fundamental characteristics of paper, the modification of paper with functional materials, and different methods for device fabrication. The review critically analyzes recent advancements, materials, and fabrication techniques for p-MSCs, exploring their potential applications and benefits, such as flexibility, cost-effectiveness, and sustainability. Additionally, this review highlights gaps in current research, guiding future investigations and innovations in the field. It provides an overview of the current state of p-MSCs and offers valuable insights for researchers and professionals in the field. The critical analysis and discussion presented herein offer a roadmap for the future development of p-MSCs and their potential impact on the domain of flexible electronics.

Flexible Supercapacitor with Wide Electrochemical Stable Window Based on Hydrogel Electrolyte.

Hydrogel electrolyte can endow supercapacitors with excellent flexibility, which has developed rapidly in recent years. However, the water-rich structures of hydrogel electrolyte are easy to freeze at subfreezing and dry at high temperatures, which will affect its energy storage characteristics. The low energy density of micro supercapacitors also hinders their development. Herein, a strategy is proposed to reduce the free water activity in the hydrogel to improve the operating voltage and the energy density of the device, which is achieved through the synergistic effect of the hydrogel skeleton, N, N'-dimethylformamide (DMF), NaClO4 and water. High concentrations of DMF and NaClO4 are introduced into sodium alginate/polyacrylamide (SA/PAAM) hydrogel through solvent exchange to obtain SA/PAAM/DMF/NaClO4 hydrogel electrolyte, which exhibited a high ionic conductivity of 82.1 mS cm-1, a high breaking strength of 563.2 kPa, and a wide voltage stability window of 3.5 V. The supercapacitor devices are assembled by the process of direct adhesion of the hydrogel electrolyte and  laser induced graphene (LIG). The micro-supercapacitor exhibited an operating voltage of 2.0 V, with a specific capacitance of 2.41 mF cm-2 and a high energy density of 1.34 µWh cm-2, and it also exhibit a high cycle stability, good flexibility, and integration performance.

Conformal Engineering of Both Electrodes Toward High-Performance Flexible Quasi-Solid-State Zn-Ion Micro-Supercapacitors.

The severe Zn-dendrite growth and insufficient carbon-based cathode performance are two critical issues that hinder the practical applications of flexible Zn-ion micro-ssupercapacitors (FZCs). Herein, a self-adaptive electrode design concept of the synchronous improvement on both the cathode and anode is proposed to enhance the overall performance of FZCs. Polypyrrole doped with anti-expansion graphene oxide and acrylamide (PPy/GO-AM) on the cathode side can exhibit remarkable electrochemical performance, including decent capacitance and cycling stability, as well as exceptional mechanical properties. Meanwhile, a robust protective polymeric layer containing reduced graphene oxide and polyacrylamide is self-assembled onto the Zn surface (rGO/PAM@Zn) at the anode side, by which the "tip effect" of Zn small protuberance can be effectively alleviated, the Zn-ion distribution homogenized, and dendrite growth restricted. Benefiting from these advantages, the FZCs deliver an excellent specific capacitance of 125 mF cm-2 (125 F cm-3) at 1 mA cm-2, along with a maximum energy density of 44.4 µWh cm-2, and outstanding long-term durability with 90.3% capacitance remained after 5000 cycles. This conformal electrode design strategy is believed to enlighten the practical design of high-performance in-plane flexible Zn-based electrochemical energy storage devices (EESDs) by simultaneously tackling the challenges faced by Zn anodes and capacitance-type cathodes.

Broadening the Voltage Window of 3D-Printed MXene Micro-Supercapacitors with a Hybridized Electrolyte.

The burgeoning demand for miniaturized energy storage devices compatible with the miniaturization trend of electronic technologies necessitates advancements in micro-supercapacitors (MSCs) that promise safety, cost efficiency, and high-speed charging capabilities. However, conventional aqueous MSCs face a significant limitation due to their inherently narrow electrochemical potential window, which restricts their operational voltage and energy density compared to their organic and ionic liquid counterparts. In this study, we introduce an innovative aqueous NaCl/H2O/EG hybrid gel electrolyte (comprising common salt (NaCl), H2O, ethylene glycol (EG), and SiO2) for Ti3C2Tx MXene MSCs that substantially widens the voltage window to 1.6 V, a notable improvement over traditional aqueous system. By integrating the hybrid electrolyte with 3D-printed MXene electrodes, we realized MSCs with remarkable areal capacitance (1.51 F cm-2) and energy density (675 µWh cm-2), significantly surpassing existing benchmarks for aqueous MSCs. The strategic formulation of the hybrid electrolyte-a low-concentration NaCl solution with EG-ensures both economic and environmental viability while enabling enhanced electrochemical performance. Furthermore, the MSCs fabricated via 3D printing technology exhibit exceptional flexibility and are suitable for modular device integration, offering a promising avenue for the development of high-performance, sustainable energy storage devices. This advancement not only provides a tangible solution to the challenge of limited voltage windows in aqueous MXene MSCs but also sets a new precedent for the design of next-generation MSCs that align with the needs of an increasingly microdevice-centric world.

Stabilizing Ni2+ in Hollow Nano MOF/Polymetallic Phosphides Composites for Enhanced Electrochemical Performance in 3D-Printed Micro-Supercapacitors.

Polymetallic phosphides exhibit favorable conductivities. A reasonable design of nano-metal-organic frame (MOF) composite morphologies and in situ introduction of polymetallic phosphides into the framework can effectively improve electrolyte penetration and rapid electron transfer. To address existing challenges, Ni, with a strong coordination ability with N, is introduced to partially replace Co in nano-Co-MOF composite. The hollow nanostructure is stabilized through CoNi bimetallic coordination and low-temperature controllable polymetallic phosphide generation rate. The Ni, Co, and P atoms, generated during reduction, effectively enhance electron transfer rate within the framework. X-ray absorption fine structure (XAFS) characterization results further confirm the existence of Ni-N, Ni-Ni, and Co-Co structures in the nanocomposite. The changes in each component during the charge-discharge process of the electrochemical reactions are investigated using in situ X-ray diffraction (XRD). Theoretical calculations further confirm that P can effectively improve conductivity. VZNPGC//MXene MSCs, constructed with active materials derived from the hollow nano MOF composites synthesized through the Ni2+ stabilization strategy, demonstrate a specific capacitance of 1184 mF cm-2, along with an energy density of 236.75 µWh cm-2 (power density of 0.14 mW cm-2). This approach introduces a new direction for the synthesis of highly conductive nano-MOF composites.

Electrochemically Exfoliated Graphene Additive-Free Inks for 3D Printing Customizable Monolithic Integrated Micro-Supercapacitors on a Large Scale.

Three-dimensional (3D) printing technology with enhanced fidelity can achieve multiple functionalities and boost electrochemical performance of customizable planar micro-supercapacitors (MSCs), however, precise structural control of additive-free graphene-based macro-assembly electrode for monolithic integrated MSCs (MIMSCs) remains challenging. Here, the large-scale 3D printing fabrication of customizable planar MIMSCs is reported utilizing additive-free, high-quality electrochemically exfoliated graphene inks, which is not required the conventional cryogenic assistance during the printing process and any post-processing reduction. The resulting MSCs reveal an extremely small engineering footprint of 0.025 cm2, exceptionally high areal capacitance of 4900 mF cm-2, volumetric capacitance of 195.6 F cm-3, areal energy density of 2.1 mWh cm-2, and unprecedented volumetric energy density of 23 mWh cm-3 for a single cell, surpassing most previously reported 3D printed MSCs. The 3D printed MIMSC pack is further demonstrated, with the maximum areal cell count density of 16 cell cm-2, the highest output voltage of 192.5 V and the largest output voltage per unit area of 56 V cm-2 up to date are achieved. This work presents an innovative solution for processing high-performance additive-free graphene ink and realizing the large-scale production of 3D printed MIMSCs for planar energy storage.

MXene-Based Micro-Supercapacitors: Ink Rheology, Microelectrode Design and Integrated System.

MXenes have shown great potential for micro-supercapacitors (MSCs) due to the high metallic conductivity, tunable interlayer spacing and intercalation pseudocapacitance. In particular, the negative surface charge and high hydrophilicity of MXenes make them suitable for various solution processing strategies. Nevertheless, a comprehensive review of solution processing of MXene MSCs has not been conducted. In this review, we present a comprehensive summary of the state-of-the-art of MXene MSCs in terms of ink rheology, microelectrode design and integrated system. The ink formulation and rheological behavior of MXenes for different solution processing strategies, which are essential for high quality printed/coated films, are presented. The effects of MXene and its compounds, 3D electrode structure, and asymmetric design on the electrochemical properties of MXene MSCs are discussed in detail. Equally important, we summarize the integrated system and intelligent applications of MXene MSCs and present the current challenges and prospects for the development of high-performance MXene MSCs.

Inducing Directional Charge Delocalization in 3D-Printable Micro-Supercapacitors Based on Strongly Coupled Black Phosphorus and ReS2 Nanocomposites.

The growing interest in so-called interface coupling strategies arises from their potential to enhance the performance of active electrode materials. Nevertheless, designing a robust coupled interface in nanocomposites for stable electrochemical processes remains a challenge. In this study, an epitaxial growth strategy is proposed by synthesizing sulfide rhenium (ReS2) on exfoliated black phosphorus (E-BP) nanosheets, creating an abundance of robust interfacial linkages. Through spectroscopic analysis using X-ray photoelectron spectroscopy and X-ray absorption spectroscopy, the authors investigate the interfacial environment. The well-developed coupled interface and structural stability contribute to the impressive performance of the 3D-printed E-BP@ReS2-based micro-supercapacitor, achieving a specific capacitance of 47.3 mF cm-2 at 0.1 mA cm-2 and demonstrating excellent long-term cyclability (89.2% over 2000 cycles). Furthermore, density functional theory calculations unveil the positive impact of the strongly coupled interface in the E-BP@ReS2 nanocomposite on the adsorption of H+ ions, showcasing a significantly reduced adsorption energy of -2.17 eV. The strong coupling effect facilitates directional charge delocalization at the interface, enhancing the electrochemical performance of electrodes and resulting in the successful construction of advanced micro-supercapacitors.

Bioinspired Synaptic Branched Network within Quasi-Solid Polymer Electrolyte for High-Performance Microsupercapacitors.

The branched network-driven ion solvating quasi-solid polymer electrolytes (QSPEs) are prepared via one-step photochemical reaction. A poly(ethylene glycol diacrylate) (PEGDA) is combined with an ion-conducting solvate ionic liquid (SIL), where tetraglyme (TEGDME), which acts like interneuron in the human brain and creates branching network points, is mixed with EMIM-NTf2 and Li-NTf2. The QSPE exhibits a unique gyrified morphology, inspired by the cortical surface of human brain, and features well-refined nano-scale ion channels. This human-mimicking method offers excellent ion transport capabilities through a synaptic branched network with high ionic conductivity (σDC ≈ 1.8 mS cm-1 at 298 K), high dielectric constant (εs ≈ 125 at 298 K), and strong ion solvation ability, in addition to superior mechanical flexibility. Furthermore, the interdigitated microsupercapacitors (MSCs) based on the QSPE present excellent electrochemical performance of high energy (E  =  5.37 µWh cm-2) and power density (P  =  2.2 mW cm-2), long-term cycle stability (≈94% retention after 48 000 cycles), and mechanical stability (>94% retention after continuous bending and compressing deformation). Moreover, these MSC devices have flame-retarding properties and operate effectively in air and water across a wide temperature range (275 to 370 K), offering a promising foundation for high-performance, stable next-generation all-solid-state energy storage devices.

Large-Scale Production and Integrated Application of Micro-Supercapacitors.

Micro-supercapacitors, emerging as promising micro-energy storage devices, have attracted significant attention due to their unique features. This comprehensive review focuses on two key aspects: the scalable fabrication of MSCs and their diverse applications. The review begins by elucidating the energy storage mechanisms and guiding principles for designing high-performance devices. It subsequently explores recent advancements in scalable fabrication techniques for electrode materials and micro-nano fabrication technologies for micro-devices. The discussion encompasses critical application domains, including multifunctional MSCs, energy storage integration, integrated power generation, and integrated applications. Despite notable progress, there are still some challenges such as large-scale production of electrode material, well-controlled fabrication technology, and scalable integrated manufacture. The summary concludes by emphasizing the need for future research to enhance micro-supercapacitor performance, reduce production costs, achieve large-scale production, and explore synergies with other energy storage technologies. This collective effort aims to propel MSCs from laboratory innovation to market viability, providing robust energy storage solutions for MEMS and portable electronics.