"Four - in - one" platform based on multifunctional nanozyme for ultra - accurate detection and on - demand disinfection of Listeria monocytogenes.

The inability to integrate detection and disinfection hindered building a unified pathogen monitoring platform, risking secondary contamination. Herein, a novel "four - in - one" platform for monitoring foodborne Listeria monocytogenes (L. monocytogenes) was presented. The magnetic daptomycin - functionalized Fe3O4 (Dap/Fe3O4) could selectively bind to L. monocytogenes, enhancing detection accuracy. The separated bacteria were captured by aptamers - functionalized Fe - doped - silica nanoparticles (Apt/Fe@SiNPs) for tri - mode detection. Besides fluorescence, the Apt/Fe@SiNPs converted 3,3',5,5' - tetramethylbenzidine (TMB) to oxidized TMB (oxTMB) via peroxidase activity, allowing colorimetric and subsequent photothermal detection upon irradiation, as low as 2.06 CFU/mL. Magnetic - induced aggregation of Apt/Fe@SiNPs generated toxic hydroxyl radicals around L. monocytogenes, achieving ∼99.6% disinfection. Furthermore, the biofilm of L. monocytogenes was effectively inhibited by the action of hydroxyl radicals. The platform might offer a promising prospect to control L. monocytogenes in food industries.

A Study on the Relationship between the Thermoelectric Properties and Infrared Emission Performance of ZnO/SrTiO3 Composite Materials.

The thermoelectric properties and infrared emissivity of materials may seem unrelated, but both are influenced by electrical conductivity and thermal conductivity. The photothermal effect of SrTiO3 can establish a connection between the Seebeck coefficient and infrared absorption in the 8-14 µm range. However, there is currently limited research on the relationship between thermoelectric performance and infrared emissivity. In this study, ZnO/SrTiO3 composites were prepared using a hydrothermal method combined with spark plasma sintering. The intrinsic relationship between the thermoelectric and infrared emission performance of the composites was investigated by varying the ZnO content. As the ZnO content increased, the grain boundary barrier of the samples changed, affecting both electrical and thermal conductivities. The infrared emissivity initially decreased and then increased with increasing ZnO content, which contrasted with the trend observed in electrical conductivity, in accordance with the Hagen-Rubens relationship. The ZT value and infrared emissivity exhibited opposite trends, with the ZnO-5 sample having the highest thermoelectric performance and the lowest infrared emissivity, making it the most representative sample. The relationship between the thermoelectric performance and infrared emissivity of SrTiO3 is of significant importance for developing multifunctional materials with both thermoelectric and infrared properties.

Multifunctional Radiation Conditioning Emitter for Laser and Infrared with Adaptive Radiative Cooling.

With the development of technology, multifunctional multiband emitters have been paid much attention due to their wide range of applications, such as LIDAR detection, spectroscopic sensing, and infrared thermal management. However, the development of such emitters is impeded by incompatible structural requirements of different electromagnetic wavebands. Here, we demonstrate coupled modulation between near-infrared (NIR) laser-wavelength and long-wavelength-infrared by constructing a multifunctional emitter (MFE) with a structure of Al/HfO2/VO2, utilizing the phase transition of VO2. The MFE displays excellent thermal modulation capability within the 8-14 µm range, achieving a thermal insulation effect (ε8-14 µm = 0.18) at low temperatures, and heat dissipation effect (ε8-14 µm = 0.64) at high temperatures. The MFE's radiation power regulation capability is 145.06 W m-2 between a temperature of 0 to 60 °C. Moreover, the MFE possesses a large reflectivity modulation value of 0.78 at NIR laser-wavelength (1.06 µm) with a short phase transition time of 1003 ms under 3 W cm-2 laser irradiation. This study provides a guideline for the coordinated control of electromagnetic waves and intelligent collaborative thermal management through simple structural design, thus, having broad implications in energy saving and thermal information processing.

The importance of different forest management systems for people's dietary quality in Tanzania.

Context: A large body of literature has shown that forests provide nutritious foods in many low- and middle-income countries. Yet, there is limited evidence on the contributions from different types of forest and tree systems. Objectives: Here, we focus on individual trees and smaller forest patches outside established forest reserves as well as different forest management systems. Methods: We do so by combining novel high-resolution data on tree cover with 24-h dietary recall surveys from 465 women in Tanzania. Results: We show that people with more unclassified tree cover (i.e., individual trees and small forest patches) in their nearby surroundings have more adequate protein, iron, zinc, and vitamin A intakes. We also find that having a nearby forest under Participatory Forest Management (PFM) system is associated with higher adequacy levels of energy, iron, zinc and vitamin A. By contrast, tree cover within other types of forest (e.g., Government Forest Reserves and Government Forest Plantations) is not positively associated with people's dietary quality. Conclusions: Our key finding is that having individual trees, smaller forest patches and/or forest under PFM in close proximity is more beneficial for people's diets than other types of established forests. Our results highlight the nutritional importance of trees outside established forests and question the often-assumed benefits of forests if these are made inaccessible by social barriers (e.g., legislation). Finally, our results emphasize the need to distinguish between different forest management systems when studying forest-diet linkages. Supplementary Information: The online version contains supplementary material available at 10.1007/s10980-024-01961-6.

Photo-induced time-dependent controllable wettability of dual-responsive multi-functional electrospun MXene/polymer fibers.

Switchable wettability potential in smart fibers is of paramount importance in various applications. Light-induced controllable changes in surface wettability have a significant role in this area. Herein, smart waterborne homopolymer, functional copolymer with different polarity and flexibility, and multi-functional terpolymer particles containing a time-dependent dual-responsive acrylated spiropyran, as a polymerizable monomer, were successfully synthesized through eco-friendly single-step emulsifier-free emulsion polymerization. Presence of 10 wt% of butyl acrylate and dimethylaminoethyl methacrylate relative to methylmethacrylate as functional comonomers decreased the Tg of the samples almost 20 ℃ and increased their polarity. The optical properties of the particles were investigated, and the UV-vis and fluorescence spectroscopy results showed that not only polarity and flexibility of the polymer chains may have a positive effect on improving the optical properties, but also the simultaneous presence of functional groups has a synergistic effect. The smart polymer particles with flexibility and polarity features exhibited higher absorption and emission compared to other samples. Inspired by these findings, multi-functional smart polymer fibers were prepared using the electrospinning method. The smart multi-functional electrospun fibers containing few-layer Ti3C2 MXenes were synthesized to improve the fibers' properties and change the surface wettability due to the hydrophilic functional groups of MXene. Field-emission scanning electron microscopy images displayed the successful preparation of few-layer MXenes. Smooth and bead-free fibers with bright red fluorescence emission under UV irradiation were shown using fluorescence microscopy. The study on the surface wettability of fibers revealed that UV and visible light irradiation induced reversible time-dependent changes in the wettability of the smart multi-functional MXene/polymer electrospun fibers from hydrophobic to hydrophilic, reaching a water contact angle of 10° from an initial water contact angle of 100° under UV light and also changing to superhydrophilic state with passing time. Upon visible light exposure, the fibers returned to their original state. Furthermore, the fibers demonstrated a high stability over five alternating cycles of UV and visible light irradiation. This study shows that the fabrication of time-dependent smart fibers, utilizing the flexibility and polarity in the presence of MXenes, significantly improves and controls surface wettability changes. The outstanding dynamically photo-switchable wettability of these fibers may offer exciting opportunities in various applications, especially in the separation of oil from water contaminants.

Multifunctional bioactive glass nanoparticles: surface-interface decoration and biomedical applications.

Developing bioactive materials with multifunctional properties is crucial for enhancing their biomedical applications in regenerative medicine. Bioactive glass nanoparticle (BGN) is a new generation of biomaterials that demonstrate high biocompatibility and tissue-inducing capacity. However, the hard nanoparticle surface and single surface property limited their wide biomedical applications. In recent years, the surface functional strategy has been employed to decorate the BGN and improve its biomedical applications in bone tissue repair, bioimaging, tumor therapy and wound repair. This review summarizes the progress of surface-interface design strategy, customized multifunctional properties and biomedical applications in detail. We also discussed the current challenges and further development of multifunctional BGN to meet the requirements of various biomedical applications.

Battery-Free and Multifunctional Microfluidic Janus Wound Dressing with Biofluid Management, Multi-Indicator Monitoring, and Antibacterial Properties.

The sophisticated environment of chronic wounds, characterized by prolonged exudation and recurrent bacterial infections, poses significant challenges to wound recovery. Recent advancements in multifunctional wound dressings fall short of providing comprehensive, accurate, and comfortable treatment. To address these issues, a battery-free and multifunctional microfluidic Janus wound dressing (MM-JWD) capable of three functions, including exudate management, antibacterial properties, and multiple indications of wound infection detection, has been developed. During the treatment, the fully soft microfluidic Janus membrane not only demonstrated stable unidirectional fluid transport capabilities under various skin deformations for a longer period but also provided antibacterial effects through surface treatment with chitosan quaternary ammonium salts and poly(vinyl alcohol). Furthermore, integrating multiple colorimetric sensors within the Janus membrane's microchannels and a dual-layer structure enabled simultaneous monitoring of the wound's pH, uric acid, and temperature. The monitoring was facilitated by smartphone recognition of color changes in the sensors. In vivo and in vitro tests confirmed the exudate management, antibacterial, and sensing capabilities of the MM-JWD, proving its efficacy in monitoring and promoting the healing of wounds. Overall, this study provides a valuable method for the design of multifunctional wound dressings for chronic wound care.

Glucose oxidase and MnO2 functionalized liposome for catalytic radiosensitization enhanced synergistic breast cancer therapy.

In recent years, the integration of radiotherapy and nanocatalytic medicine has gained widespread attention in the treatment of breast cancer. Herein, the glucose oxidase (GOx) and MnO2 nanoparticles co-modified multifunctional liposome of GOx-MnO2@Lip was constructed for enhanced radiotherapy. Introduction of GOx would not only elevate the glucose consumption to starve the cancer cells, but also increased the endogenous H2O2 level. Meanwhile, high intracellular GSH concentration facilitated the release of Mn2+ to amplify the cytotoxic ·OH through cascade catalytic reactions within the tumor microenvironment, resulting in a favorable tumor suppression rate of 74.45 %. Furthermore, the blood biochemical and blood routine demonstrated that GOx-MnO2@Lip had no obvious toxic side effects. Therefore, this work provided a potential vehicle for synergistic cancer starving therapy, chemodynamic therapy and radiotherapy for improving therapeutic efficacy of breast cancer.

Biopolymer-polyphenol conjugates: Novel multifunctional materials for active packaging.

The development of natural active packaging materials and coatings presents a promising alternative to petroleum-based packaging solutions. These materials are engineered by incorporating functional ingredients with preservative capabilities. Concurrently, research has highlighted the diverse physicochemical, functional, and health-promoting properties of protein-polyphenol, polysaccharide-polyphenol, and protein-polysaccharide-polyphenol conjugates within various food formulations. However, a critical gap exists regarding the exploration of these biopolymers as active packaging materials. In contrast to conventional approaches for developing active packaging materials, this review presents a novel perspective by focusing on biopolymer-polyphenol conjugates. In this work, we delve into the realm of active packaging materials and coatings constructed from these conjugates, highlighting their potential as multifunctional active components in food packaging and preservation. This review comprehensively investigates the physicochemical properties, functionalities, and health-promoting activities associated with biopolymer-polyphenol conjugates. Their emulsification, antioxidant, and antimicrobial activities, coupled with enhancements in mechanical strength and permeability properties, contribute to their multifunctional nature. Furthermore, we explore the potential advantages and limitations of utilizing these conjugates in active packaging applications. Finally, the review concludes by proposing crucial research avenues for further exploration of biopolymer-polyphenol conjugates within the domain of active food packaging.

Solar-Driven Evaporator With "Starburst Turbine" Design Featuring Directional Salt Crystallization, Antibacterial, and Catalytic Multifunctionality for Efficient Water Purification.

Facing the global challenge of water scarcity, solar-driven desalination is considered a sustainable technology for obtaining freshwater from seawater. However, issues such as uncontrolled salt crystallization and bacterial contamination limit its efficiency and practicality. This study proposes an innovative solar-driven evaporator designed to address these challenges using optimized shape design and advanced photothermal materials. Based on finite element analyses, cylindrical evaporators with a "Starburst Turbine" shape are designed and fabricated, achieving directional salt crystallization and a record-breaking water collection rate of 3.56 kg m-2 h-1 and an evaporation rate of 4.57 kg m-2 h-1 under one sun illumination. During continuous 60-h illumination tests, the evaporator maintained a stable evaporation rate, attributed to its excellent directional salt crystallization capability. Additionally, the evaporator demonstrates superior photodynamic antibacterial performance and photocatalytic degradation of organic pollutants. Under one sun illumination for 1 h, it achieves 100% sterilization of S. aureus and E. coli, and a 95.4% degradation of methylene blue (MB), demonstrating its potential to purify various wastewater types. These findings underscore the significant scientific and practical value of integrating antibacterial and photocatalytic functions into solar water purification materials, providing a sustainable solution to global water scarcity challenges and environmental protection.

Highly Efficient and Stable Perovskite Solar Modules Based on FcPF6 Engineered Spiro-OMeTAD Hole Transporting Layer.

Li-TFSI doped spiro-OMeTAD is widely recognized as a beneficial hole transport layer (HTL) in perovskite solar cells (PSCs), contributing to high device efficiencies. However, the uncontrolled migration of lithium ions (Li+) during device operation has impeded its broad adoption in scalable and stable photovoltaic modules. Herein, an additive strategy is proposed by employing ferrocenium hexafluorophosphate (FcPF6) as a relay medium to enhance the hole extraction capability of the spiro-OMeTAD via the instant oxidation function. Besides, the novel Fc-Li interaction effectively restricts the movement of Li+. Simultaneously, the dissociative hexafluorophosphate group is cleverly exploited to regulate the unstable iodide species on the perovskite surface, further inhibiting the formation of migration channels and stabilizing the interfaces. This modification leads to power conversion efficiencies (PCEs) reaching 22.13% and 20.27% in 36 cm2 (active area of 18 cm2) and 100 cm2 (active area of 56 cm2) perovskite solar modules (PSMs), respectively, with exceptional operational stability obtained for over 1000 h under the ISOS-L-1 procedure. The novel FcPF6-based engineering approach is pivotal for advancing the industrialization of PSCs, particularly those relying on high-performance spiro-OMeTAD- based HTLs.

High-Entropy Materials for Prospective Biomedical Applications: Challenges and Opportunities.

With their unique structural characteristics, customizable chemical composition, and adjustable functional characteristics, high-entropy materials (HEMs) have triggered a wide range of interdisciplinary research, especially in the biomedical field. In this paper, the basic concept, core properties, and preparation methods of HEMs are first summarized, and then the application and development of HEMs in the field of biomedical are briefly described. Subsequently, based on the diverse and comprehensive properties of HEMs and a few reported cases, the possible application scenarios of HEMs in biological fields such as biosensors, antibacterial materials, therapeutics, bioimaging, and tissue engineering are prospectively predicted and discussed. Finally, their potential advantages and major challenges is summarized, which may provide useful guidance and principles for researchers to develop and optimize novel HEMs.

A Flexible Multifunctional Cyanoethyl-Modified Bacterial Cellulose Nanofiber Framework for High-Energy and High-Power Density Aqueous Li-Ion Batteries.

Aqueous rechargeable lithium-ion batteries (ARLIBs) are extensively researched due to their inherent safety, typical affordability, and potential high energy density. However, fabricating ARLIBs with both high energy density and power performance remains challenging. Herein, based on cyanoethyl-modified bacterial cellulose nanofibers (CBCNs), a multifunctional fast ion transport framework is developed to construct the flexible free-standing ARLIBs with high areal loading and excellent rate performance. Benefiting from the unique merits of CBCNs, such as ultra-high aspect ratio, excellent toughness, superior adhesion, good lithiophilicity and ideal stability, the flexible free-standing and highly robust electrodes are fabricated and exhibit a long-term stable cycling of 1200 cycles with a high specific capacity of 117 mAh∙g-1 at 15 C. Remarkably, the corresponding full cell with the free-standing high mass loading (45.5 mg∙cm-2) electrodes under the condition of ultra-low addition of battery binder demonstrates a cycle lifespan of over 1000 cycles with a specific capacity of 120 mAh∙g-1 and a capacity decay as low as 0.03% per cycle, which is far superior to those of almost all previous reports. This work provides a strategy for constructing ARLIBs with high energy density and power performance by introducing a unique fast ion transport nanofiber framework.

Dissolution Manufacturing Strategy for the Facile Synthesis of Nanoporous Metallic Glass Multifunctional Catalyst.

The quest for heightened energy efficiency is inextricably linked to advancements in energy storage and conversion technologies, wherein multifunctional catalysts play a pivotal role by mitigating the slow kinetics endemic to many catalytic reactions. The intricate synthesis and bespoke design of such catalysts, however, present notable challenges. Addressing this, the present study capitalizes on a novel dissolution manufacturing strategy to engineer self-supporting, nanoporous multifunctional electrocatalysts, circumventing the prevalent issue of customizing catalytic functionalities upon demand. This innovative approach grants the flexibility to finely tune the incorporation of active species and metalloid binders, culminating in the creation of a self-supporting nanoporous metal glass electrocatalyst doped with RuO2 (NPMG@RuO2) with outstanding performance in alkaline media. The catalyst showcases superior electrocatalytic activity, achieving low overpotentials of 41.50 mV for the Hydrogen Evolution Reaction and 226.0 mV for Oxygen Evolution Reaction alongside sustained stability over 620 hours.These achievements are attributed to the distinct nanoporous architecture that ensures a high density of catalytic sites and mechanical strength, bolstered by the synergistic interplay between RuO2 and Pt-based metallic glass. The findings provide a versatile template for the development of nanoporous multifunctional catalysts, signifying a leap forward in the realm of energy conversion technologies.

3D cellulose scaffold with gradient pore structure controlled by hydrogen bond competition: Super-strength and multifunctional oil/water separation.

Cellulose-based aerogels offer exceptional promise for oily wastewater treatment, but the challenge of low mechanical strength and limited application functions persists. Inspired by the graded porous structures in the animal skeleton and bamboo stem, we firstly report here a stepwise solvent diffusion-induced phase separation approach for constructing the gradient pore-density three-dimensional (3D) cellulose scaffold (GPDS). Benefiting from the regulation of competitive hydrogen bonding between the anti-solvents and the ionic liquid (IL) in cellulose solution, GPDS exhibits the decreased major channels size and increased minor pores amount gradually along the solvent diffusion direction. These endow GPDS with the characteristics of low density (0.019 g/cm) and super strength (high up to 870 KPa). The application of GPDS in the field of oil-water separation has achieved remarkable results, including oil/organic solvent absorption (13-25 g/gGPDS), immiscible oil-water mixture separation (high efficiency up to 99.8 %, flux > 2000 L/m2·h), and surfactant-stabilized oil-in-water emulsion (efficiency up to 97.7 %). Moreover, a simple hydrophobic treatment further realizes the efficient separation of water-in-oil emulsion (98.5 % efficiency). The as-fabricated GPDS accordingly achieves the multifunctional application in oil-water separation field. Thus, a new avenue is opened to construct 3D cellulose porous scaffold as adsorbent materials in oily wastewater treatment.

Zn@TA assisted dual cross-linked 3D printable glycol grafted chitosan hydrogels for robust antibiofilm and wound healing.

Rapid regeneration of the injured tissue or organs is necessary to achieve the usual functionalities of the damaged parts. However, bacterial infections delay the regeneration process, a severe challenge in the personalized healthcare sector. To overcome these challenges, 3D-printable multifunctional hydrogels of Zn/tannic acid-reinforced glycol functionalized chitosan for rapid wound healing were developed. Polyphenol strengthened intermolecular connections, while glutaraldehyde stabilized 3D-printed structures. The hydrogel exhibited enhanced viscoelasticity (G'; 1.96 × 104 Pa) and adhesiveness (210 kPa). The dual-crosslinked scaffolds showed remarkable antibacterial activity against Bacillus subtilis (∼81 %) and Escherichia coli (92.75 %). The hydrogels showed no adverse effects on human dermal fibroblasts (HDFs) and macrophages (RAW 264.7), indicating their superior biocompatibility. The Zn/TA-reinforced hydrogels accelerate M2 polarization of macrophages through the activation of anti-inflammatory transcription factors (Arg-1, VEGF, CD163, and IL-10), suggesting better immunomodulatory effects, which is favorable for rapid wound regeneration. Higher collagen deposition and rapid re-epithelialization occurred in scaffold-treated rat groups vis-à-vis controls, demonstrating superior wound healing. Taken together, the developed multifunctional hydrogels have great potential for rapidly regenerating bacteria-infected wounds in the personalized healthcare sector.

Reconfigurable, Transformable Soft Pneumatic Actuator with Tunable Three-Dimensional Deformations for Dexterous Soft Robotics Applications.

Numerous soft actuators based on pneumatic network (PneuNet) design have already been proposed and extensively employed across various soft robotics applications in recent years. Despite their widespread use, a common limitation of most existing designs is that their action is predetermined during the fabrication process, thereby restricting the ability to modify or alter their function during operation. To address this shortcoming, in this article the design of a Reconfigurable, Transformable Soft Pneumatic Actuator (RT-SPA) is proposed. The working principle of the RT-SPA is analogous to the conventional PneuNet. The key distinction between the two lies in the ability of the RT-SPA to undergo controlled transformations, allowing for more versatile bending and twisting motions in various directions. Furthermore, the unique reconfigurable design of the RT-SPA enables the selection of actuation units with different sizes to achieve a diverse range of three-dimensional deformations. This versatility enhances the RT-SPA's potential for adaptation to a multitude of tasks and environments, setting it apart from traditional PneuNet. The article begins with a detailed description of the design and fabrication of the RT-SPA. Following this, a series of experiments are conducted to evaluate the performance of the RT-SPA. Finally, the abilities of the RT-SPA for locomotion, gripping, and object manipulation are demonstrated to illustrate the versatility of the RT-SPA across different aspects.

Lead-Free Perovskite With Efficient Tellurium Ion Activation for Multifunctional Applications.

Lead-free perovskite materials have received extensive attention due to their non-toxicity, super environmental stability and adjustable photoelectric properties. However, the inherent problems of low luminous efficiency and low photoluminescence quantum yields (PLQYs) limit its development in multifunctional applications. Here, Te4+ doped Cs2ZrCl6 with high luminous efficiency and stability for multifunctional applications are developed. Te4+ ions are used as emission centers to improve the optical properties of Cs2ZrCl6 to make efficient and stable single-component white light-emitting diodes (WLEDs), and can be used as scintillator materials to improve scintillation performance to achieve high-resolution and low-dose X-ray imaging detection. In addition, it is found for the first time that Te4+ ions can be introduced into the trap center, so that the Cs2ZrCl6:Te4+ perovskite material exhibits excellent persistent luminescence (PersL) and mechanoluminescence (ML) after X-ray radiation, which has potential applications in the fields of delayed imaging and stress sensing. This work provides a method for designing lead-free perovskites with high optical performance and scintillating properties, as well as developing multifunctional applications.

Thin, Uniform, and Highly Packed Multifunctional Structural Carbon Fiber Composite Battery Lamina Informed by Solid Polymer Electrolyte Cure Kinetics.

Multifunctional structural batteries promise advancements in structural energy storage technologies by seamlessly integrating load-bearing and energy-storage functions within a single material, reducing weight, and enhancing safety. Yet, commercialization faces challenges in materials processing, assembly, and design optimization. Here, we report a systematic approach to develop a carbon fiber (CF)-based structural battery impregnated with epoxy-based solid polymer electrolyte (SPE) via robust vacuum-assisted compression molding (VACM). Informed by cure kinetics, SPE processing enhances the multifunctional performance with no fillers or additives. The thin flexible CF-based laminae impregnated under high pressure achieved a substantial enhancement of ∼160% in the fiber volume fraction (FVF) as although thin and strip-shaped, the fibers were optimally packed with low void. A CF/SPE-based battery was fabricated, with a hybrid layered ionic liquid (IL)/ carbonate electrolyte (CE) showing enhanced safety and multifunctional performance. Enhanced by thin, uniform, and stiff CF-based composites, this study propels the development of advanced multifunctional structures, thereby expediting sustainable commercialization.

Bio-Plausible Multimodal Learning with Emerging Neuromorphic Devices.

Multimodal machine learning, as a prospective advancement in artificial intelligence, endeavors to emulate the brain's multimodal learning abilities with the objective to enhance interactions with humans. However, this approach requires simultaneous processing of diverse types of data, leading to increased model complexity, longer training times, and higher energy consumption. Multimodal neuromorphic devices have the capability to preprocess spatio-temporal information from various physical signals into unified electrical signals with high information density, thereby enabling more biologically plausible multimodal learning with low complexity and high energy-efficiency. Here, this work conducts a comparison between the expression of multimodal machine learning and multimodal neuromorphic computing, followed by an overview of the key characteristics associated with multimodal neuromorphic devices. The bio-plausible operational principles and the multimodal learning abilities of emerging devices are examined, which are classified into heterogeneous and homogeneous multimodal neuromorphic devices. Subsequently, this work provides a detailed description of the multimodal learning capabilities demonstrated by neuromorphic circuits and their respective applications. Finally, this work highlights the limitations and challenges of multimodal neuromorphic computing in order to hopefully provide insight into potential future research directions.