CNN-Optimized Electrospun TPE/PVDF Nanofiber Membranes for Enhanced Temperature and Pressure Sensing.

Temperature and pressure sensors currently encounter challenges such as slow response times, large sizes, and insufficient sensitivity. To address these issues, we developed tetraphenylethylene (TPE)-doped polyvinylidene fluoride (PVDF) nanofiber membranes using electrospinning, with process parameters optimized through a convolutional neural network (CNN). We systematically analyzed the effects of PVDF concentration, spinning voltage, tip-to-collector distance, and flow rate on fiber morphology and diameter. The CNN model achieved high predictive accuracy, resulting in uniform and smooth nanofibers under optimal conditions. Incorporating TPE enhanced the hydrophobicity and mechanical properties of the nanofibers. Additionally, the fluorescent properties of the TPE-doped nanofibers remained stable under UV exposure and exhibited significant linear responses to temperature and pressure variations. The nanofibers demonstrated a temperature sensitivity of -0.976 gray value/°C and pressure sensitivity with an increase in fluorescence intensity from 537 a.u. to 649 a.u. under 600 g pressure. These findings highlight the potential of TPE-doped PVDF nanofiber membranes for advanced temperature and pressure sensing applications.

Dipyridamole-grafted copolymer electrospun nanofiber membranes for suppression of peritendinous adhesions.

Post-traumatic tendon adhesions significantly affect patient prognosis and quality of life, primarily stemming from the absence of effective preventive and curative measures in clinical practice. Current treatment modalities, including surgical excision and non-steroidal anti-inflammatory drugs, frequently exhibit limited efficacy or result in severe side effects. Consequently, the use of anti-adhesive barriers for drug delivery and implantation at the injury site to address peritendinous adhesion (PA) has attracted considerable attention. Electrospun nanofiber membranes (ENMs) have been extensively employed as drug-delivery platforms. In this study, we fabricated a polylactic acid (PLA)-dipyridamole (DP)-graft copolymer ENM called PLC-DP. This membrane exhibits enzyme-sensitive features, allowing more controlled and sustained drug release compared with conventional drug-loaded ENMs. In experiments, PLC-DP implantation reduced tissue adhesion by 47 % relative to the control group while not adversely affecting tendon healing. Mechanistically, PLC-DP effectively activates the FXYD domain containing ion-transport regulator 2 (FXYD2) protein, thereby downregulating the fibroblast-transforming growth factor beta (TGF-ß)/Smad3 signaling pathway. PLC-DP leverages the anti-adhesive properties of DP and the enzyme-sensitive characteristics of graft copolymers, providing a promising approach for the future clinical treatment and prevention of PA. STATEMENT OF SIGNIFICANCE: Peritendinous adhesions (PA) are a common and disabling condition that seriously affects the prognosis and quality of life of post-trauma patients. Current treatments often have limited efficacy or severe side effects, leaving a serious gap in clinical practice. We developed a significant biomaterial, poly(lactic acid)-dipyridamole graft copolymer electrospun nanofibrous membrane (PLC-DP), specifically for PA inhibition. In addition, this study uniquely combines dipyridamole, an anti-adhesive agent, and enzyme-sensitive copolymers in electrospun nanofibrous membrane. Unlike conventional drug-loaded electrospun nanofibrous membranes, PLC-DPs have enzyme-sensitive drug properties that allow for sustained drug release on demand. Our experiments showed that implantation of PLC-DP was effective in reducing tissue adhesions by 47 % without affecting tendon healing. We elucidated the mechanism behind this phenomenon, suggesting that PCD activates FXYD2 to inhibit TGF-ß-induced expression of Col III, which is a key factor in PA development.

Preparation and Properties of Polyimide/Polysulfonamide/Polyethylene Glycol (PI/PSA/PEG) Hydrophobic Nanofibrous Membranes.

In this study, polyimide (PI) and polysulfonamide (PSA) were used as base materials, and polyethylene glycol (PEG) was added to successfully prepare PI/PSA/PEG nanofiber membranes through electrospinning technology. Subsequently, water etching was performed on the membranes, utilizing the water solubility of PEG to form the rough wrinkled structure, further enhancing the surface hydrophobicity. The experimental results showed that under the conditions of a spinning voltage of 10 kV, PI/PSA mass fraction of 15 wt.%, and PEG-to-PI/PSA mass ratio of 1/3, the obtained fiber membranes exhibit a uniform morphology (an average diameter of 0.73 µm) and excellent hydrophobicity (the initial water contact angle (WCA) reaching 130.4°). After PEG water etching, the surface of the PI/PSA/PEG hydrophobic membranes formed the rough wrinkled structure, which not only improved their mechanical properties but also further enhanced their hydrophobicity (the initial WCA increasing to 137.9°). Hence, fiber membranes are expected to have broad application prospects in fields such as waterproofing and moisture permeability.

Batch preparation and characterization of zein-based beaded nanofiber membranes for active food packaging.

Active packaging can efficiently enhance the shelf life of food, realizing the encapsulation and effective release of antibacterial agents and antioxidants. Zein is a natural protein derived from corn, widely used in food packaging. In this work, zein-based nanofiber membranes (NFMs) with beaded structures for food packaging were fabricated in batch using a self-made free surface electrospinning. The characteristics of NFMs were investigated in terms of their morphologies, structures and properties. The results illustrated that the antioxidant activity of NFMs was significantly improved after adding licorice extracts. Moreover, after adding the eugenol to the zein/licorice extract NFMs, zein/licorice extract/eugenol (ZLE) NFM had outstanding antibacterial activities against Staphylococcus aureus and Escherichia coli, which effectively prolonged the shelf-life of the grapes when it was used to package grapes. It proved that ZLE NFM had great potential in food packaging applications.

3D nanofiber scaffolds from 2D electrospun membranes boost cell penetration and positive host response for regenerative medicine.

The ideal tissue engineering scaffold should facilitate rapid cell infiltration and provide an optimal immune microenvironment during interactions with the host. Electrospinning can produce two-dimensional (2D) membranes mimicking the extracellular matrix. However, their dense structure hinders cell penetration, and their thin form restricts scaffold utility. In this study, latticed hydrogels were three-dimensional (3D) printed onto electrospun membranes. This technique allowed for layer-by-layer assembly of the membranes into 3D scaffolds, which maintained their resilience impressively under both dry and wet conditions. We assessed the cellular and host responses of these 3D nanofiber scaffolds by comparing random membranes and mesh-like membranes with three different mesh sizes (250, 500, and 750 µm). It was found that scaffolds with a mesh size of 500 µm were superior for M2 macrophage phenotype polarization, vascularization, and matrix deposition. Furthermore, it was confirmed by subsequent experiments such as RNA sequencing that the mesh-like topology may promote polarization to the M2 phenotype by affecting the PI3K/AKT pathway. In conclusion, our work offers a novel method for transforming 2D nanofiber membranes into 3D scaffolds. This method boasts flexibility, allowing for the use of varied electrospun membranes and hydrogels in terms of structure and composition. It has vast potential in tissue repair and regeneration.

MXene@c-MWCNT Adhesive Silica Nanofiber Membranes Enhancing Electromagnetic Interference Shielding and Thermal Insulation Performance in Extreme Environments.

A lightweight flexible thermally stable composite is fabricated by combining silica nanofiber membranes (SNM) with MXene@c-MWCNT hybrid film. The flexible SNM with outstanding thermal insulation are prepared from tetraethyl orthosilicate hydrolysis and condensation by electrospinning and high-temperature calcination; the MXene@c-MWCNTx:y films are prepared by vacuum filtration technology. In particular, the SNM and MXene@c-MWCNT6:4 as one unit layer (SMC1) are bonded together with 5 wt% polyvinyl alcohol (PVA) solution, which exhibits low thermal conductivity (0.066 W m-1 K-1) and good electromagnetic interference (EMI) shielding performance (average EMI SET, 37.8 dB). With the increase in functional unit layer, the overall thermal insulation performance of the whole composite film (SMCx) remains stable, and EMI shielding performance is greatly improved, especially for SMC3 with three unit layers, the average EMI SET is as high as 55.4 dB. In addition, the organic combination of rigid SNM and tough MXene@c-MWCNT6:4 makes SMCx exhibit good mechanical tensile strength. Importantly, SMCx exhibit stable EMI shielding and excellent thermal insulation even in extreme heat and cold environment. Therefore, this work provides a novel design idea and important reference value for EMI shielding and thermal insulation components used in extreme environmental protection equipment in the future.

Characterization of Gelatin-Polycaprolactone Membranes by Electrospinning.

New advances in materials science and medicine have enabled the development of new and increasingly sophisticated biomaterials. One of the most widely used biopolymers is polycaprolactone (PCL) because it has properties suitable for biomedical applications, tissue engineering scaffolds, or drug delivery systems. However, PCL scaffolds do not have adequate bioactivity, and therefore, alternatives have been studied, such as mixing PCL with bioactive polymers such as gelatin, to promote cell growth. Thus, this work will deal with the fabrication of nanofiber membranes by means of the electrospinning technique using PCL-based solutions (12 wt.% and 20 wt.%) and PCL with gelatin (12 wt.% and 8 wt.%, respectively). Formic acid and acetic acid, as well as mixtures of both in different proportions, have been used to prepare the preliminary solutions, thus supporting the electrospinning process by controlling the viscosity of the solutions and, therefore, the size and uniformity of the fibers. The physical properties of the solutions and the morphological, mechanical, and thermal properties of the membranes were evaluated. Results demonstrate that it is possible to achieve the determined properties of the samples with an appropriate selection of polymer concentrations as well as solvents.

Electrospun PCL/gelatin/arbutin nanofiber membranes as potent reactive oxygen species scavengers to accelerate cutaneous wound healing.

The presence of excessive reactive oxygen species (ROS) at a skin wound site is an important factor affecting wound healing. ROS scavenging, which regulates the ROS microenvironment, is essential for wound healing. In this study, we used novel electrospun PCL/gelatin/arbutin (PCL/G/A) nanofibrous membranes as wound dressings, with PCL/gelatin (PCL/G) as the backbone, and plant-derived arbutin (hydroquinone-ß-d-glucopyranoside, ARB) as an effective antioxidant that scavenges ROS and inhibits bacterial infection in wounds. The loading of ARB increased the mechanical strength of the nanofibres, with a water vapour transmission rate of more than 2500 g/(m2 × 24 h), and the water contact angle decreased, indicating that hydrophilicity and air permeability were significantly improved. Drug release and degradation experiments showed that the nanofibre membrane controlled the drug release and exhibited favourable degradability. Haemolysis experiments showed that the PCL/G/A nanofibre membranes were biocompatible, and DPPH and ABTS+ radical scavenging experiments indicated that PCL/G/A could effectively scavenge ROS to reflect the antioxidant activity. In addition, haemostasis experiments showed that PCL/G/A had good haemostatic effects in vitro and in vivo. In vivo animal wound closure and histological staining experiments demonstrated that PCL/G/A increased collagen deposition and remodelled epithelial tissue regeneration while showing good in vivo biocompatibility and non-toxicity. In conclusion, we successfully prepared a multifunctional wound dressing, PCL/G/A, for skin wound healing and investigated its potential role in wound healing, which is beneficial for the clinical translational application of phytomedicines.

Polyvinylpyrrolidone/chitosan-loaded dihydromyricetin-based nanofiber membrane promotes diabetic wound healing by anti-inflammatory and regulating autophagy-associated protein expression.

The healing of wounds in diabetics is commonly delayed by recurring infections and persistent inflammation at the wound site. For this reason, we conducted a study using the electrospinning technique to create nanofiber membranes consisting of polyvinylpyrrolidone/chitosan (PVP/CS) and incorporated dihydromyricetin (DHM) into them. Infrared Fourier transform spectroscopy and scanning electron microscopy were used to analyze the nanofiber membrane. Experimental results in vitro have shown that PVP/CS/DHM has exceptional properties such as hydrophilicity, porosity, water vapor transport rate, antioxidant capacity, and antibacterial activity. Moreover, our study has demonstrated that the application of PVP/CS/DHM can significantly improve wound healing in diabetic mice. After an 18-day treatment period, a remarkable wound closure rate of 88.63 ± 1.37 % was achieved. The in vivo experiments revealed that PVP/CS/DHM can promote diabetic wound healing by suppressing the activation of TLR4/MyD88/NF-κB signaling pathway and enhancing autophagy-related protein as well as CD31 and HIF-1α expression in skin tissues. This study showed that PVP/CS/DHM is a promising wound dressing.

Modification of PAN electrospun nanofiber membranes with g-C3N4 nanotubes/carbon dots to enhance MBR performance.

This study is dedicated to the enhancement of electrospun polyacrylonitrile (PAN) nanofiber membranes for their application in membrane bioreactor (MBR) processes. The improvement is achieved through the incorporation of graphitic carbon nitride nanotubes/carbon dots (g-C3N4 NT/CDs) and subsequent heat post-treatments at varying temperatures. Notably, the hot-pressing methodology effectively mitigates surface roughness and significantly reduces issues related to peeling during nanofiber experimentation. Our results demonstrate that the introduction of 0.5 wt% of g-C3N4 NT/CDs leads to a substantial enhancement in water flux. In particular, nanocomposite membranes subjected to hot-pressing at 90 °C for 10 min exhibited an impressive flux recovery ratio (FRR) of 70%. Furthermore, the heat-treated nanocomposite membranes exhibited remarkable antifouling properties and significantly reduced fouling rates when compared to their heat-treated bare counterparts. This study underscores the noteworthy potential of g-C3N4 NT/CDs-modified PAN nanofiber membranes to substantially elevate MBR performance, firmly positioning them as highly promising candidates for critical applications in the domains of water and wastewater treatment. However, it is imperative to underscore that the existing written material necessitates a comprehensive overhaul to align with the provided structural framework.

Making Nanofiber Membrane Stand on End to Construct Vertically Interfacial Evaporators for Efficient Solar Evaporation, Omnidirectional Solar Absorption, and Ultrahigh-Salinity Brine Desalination.

Solar-driven interfacial desalination is widely considered to be a promising technology to address the global water crisis. This study proposes a novel electrospun nanofiber-based all-in-one vertically interfacial solar evaporator endowed with a high steam generation rate, steady omnidirectional evaporation, and enduring ultrahigh-salinity brine desalination. In particular, the electrospun nanofiber is collected into the tubular structure, followed by spraying with a dense crosslinked poly(vinyl alcohol) film, which renders them sufficiently strong for the preparation of a vertically array evaporator. The integrated evaporator made an individual capillary as a unit to form multiple thermal localization interfaces and steam dissipation channels, realizing zone heating of water. Thus a high steam generation rate exceeding 4.0 kg m-2 h-1 in pure water is demonstrated even under omnidirectional sunlight, and outperforms existing evaporators. Moreover, salt ions in the photothermal layer can be effectively transported to the water in capillaries and subsequently exchanged with the bulk water due to the strong action of capillary force, which ensures an ultrahigh desalination rate (≈12.5 kg m-2 h-1 under 3 sun) in 25 wt% concentration brine over 300 min. As such, this work provides a meaningful roadmap for the development of state-of-the-art solar-driven interfacial desalination.

In vitro toxicity of fine and coarse particulate matter on the skin, ocular and lung microphysiological cell-culture systems.

Particulate matter (PM) has been associated with adverse effects on human health, causing allergies, skin and eye irritation and corrosion, respiratory tract irritation, headaches, bronchoconstriction, cardiopulmonary diseases such as asthma, chronic obstructive pulmonary disease (COPD), lung cancer, reproductive problems, premature deaths, and epigenetic changes that lead to a wide variety of cancers, among other health conditions. The air quality in the Medellín - Colombia presents fluctuations that oscillate between the maximum permissible levels established at the national level and by the WHO, which represents a latent risk to people's health. Although important efforts have been made to quantify the different levels of pollution and administrative measures have been established to mitigate air pollution, little research work has been done to establish the relationship between these levels of pollutants and the effects on biological systems. The objective of the present research was to make a morphological and chemical characterization of particulate matter (PM) captured with a commercial air filter and a electrospun nanofiber membrane and evaluate the cytotoxicity of the each PM extracts in monolayer and co-culture models which recreate microphysiological systems of lung, skin and cornea and propose the possible cellular interactions that lead the cytotoxic response of the chemical compounds found in particulate matter in cities. The morphology and elemental chemical characterization were done with scanning electron microscopy coupled with energy dispersive X-ray spectroscopy (SEM - EDS). For the polycyclic aromatic hydrocarbons detection was made with a chromatographic method accoupled to mass spectrometer. Finally, the cytotoxicity was made in monolayers of A549, HEK001, and SIRC cell lines and microphysiological systems consisting of two-cell layer construct to resemble the interaction between fibroblast and epithelial cells that comprises naturally the corneal, skin and lung tissue. We performed three different cocultures models with BALB/3T3 clone A31 as a feeder layer, using porous Transwell® inserts in the in-contact and non-contact way. Monolayer and co-culture models were exposed to coarse and fine PM (1, 2, and 5 mg/mL) and the cell viability was evaluated at 24 h using an MTT assay. The electrospun nanofibers membranes demonstrates higher efficiency to capture PM with different sizes and high concentration of polycyclic aromatic hydrocarbons, heavy metals, and other chemical compounds responsible of many human diseases. Cytotoxic effects of MP were observed in all models at higher concentration; however, models exposed to fine PM exhibited a significant reduction in cell viability compared to those exposed to coarse PM. In addition, multilayer models are more resistant to PM exposure than monolayer models. Furthermore, the study indicated that, depending on the seeding strategy, different results might be observed: the non-contact model showed higher resistance to PM exposure than in-contact for SIRC and HEK001, but A549 monolayers showed the highest viability response. This study demonstrates the usefulness of applying co-culture models to assess environmental pollutant toxicity, in addition to being a potential alternative method to animal testing for risk assessment.

Regulating Al2O3/PAN/PEG Nanofiber Membranes with Suitable Phase Change Thermoregulation Features.

To address the thermal comfort needs of the human body, the development of personal thermal management textile is critical. Phase change materials (PCMs) have a wide range of applications in thermal management due to their large thermal storage capacity and their isothermal properties during phase change. However, their inherent low thermal conductivity and susceptibility to leakage severely limit their application range. In this study, polyethylene glycol (PEG) was used as the PCM and polyacrylonitrile (PAN) as the polymer backbone, and the thermal conductivity was increased by adding spherical nano-alumina (Al2O3). Utilizing coaxial electrospinning technology, phase-change thermoregulated nanofiber membranes with a core-shell structure were created. The study demonstrates that the membranes perform best in terms of thermal responsiveness and thermoregulation when 5% Al2O3 is added. The prepared nanofiber membranes have a melting enthalpy of 60.05 J·g-1 and retain a high enthalpy after 50 cycles of cold and heat, thus withstanding sudden changes in ambient temperature well. Additionally, the nanofiber membranes have excellent air permeability and high moisture permeability, which can increase wearer comfort. As a result, the constructed coaxial phase change thermoregulated nanofiber membranes can be used as a promising textile for personal thermal management.

Polyvinyl alcohol electrospun nanofiber membrane based solid-phase extraction for monitoring administered aminoglycoside antibiotics in various animal-derived foods.

This work aims to develop a widely applicable method to monitor administered AGs in various animal-derived food samples to ensure food safety. A polyvinyl alcohol electrospun nanofiber membrane (PVA NFsM) was synthesized and employed as solid-phase extraction (SPE) sorbent, in combination with UPLC-MS/MS, for the simultaneous detection of ten AGs in nine types of animal-derived food samples. PVA NFsM exhibited excellent adsorption performance for the targets (with an adsorption rate of over 91.09%), good matrix purification ability (with a reduction of 7.65%-77.47% in matrix effect after SPE), and good recyclability (can be reused 8 times). The method displayed a linear range of 0.1-25000 µg/kg and attained limits of detection for AGs were 0.03-15 µg/kg. Spiked samples demonstrated a recovery of 91.72%-100.04% with a precision of<13.66%. The practicality of the developed method was verified by testing multiple actual samples.

A bilayer biocompatible polycaprolactone/zinc oxide/Capparis spinosa L. ethyl acetate extract/polylactic acid nanofibrous composite scaffold for novel wound dressing applications.

Capparis spinosa L. (CSL) is used in traditional medicinal purposes for wound dressing because it contains natural phenolic and flavonoid active compounds. In the current study, a bilayer of biocompatible and mechanically stable nanofiber scaffolds with polycaprolactone (PCL)/zinc oxide and Capparis spinosa L. ethyl acetate extract (CSLE)/polylactic acid (PLA) layers was successfully prepared by an electrostatic spinning technique. Microstructural observations carried out by scanning electron microscopy (SEM) have shown that the nanofibers with a smooth surface are continuous and bead-free, and that the size distribution is uniform, with an average diameter of 314.15 nm. The results of careful observation further suggested that polymers in the nanofibers have excellent compatibility with drugs. The results of Fourier transform infrared (FTIR) spectroscopy suggested that CSLE and zinc oxide nanoparticles (ZnO) were successfully loaded in the nanofiber membranes. Water contact angle measurements revealed that the bilayer nanofiber membranes exhibited satisfactory wettability (outside layer, 130°; inner layer, 72.4°). Tensile testing showed that the bilayer PCL/ZnO-CSLE/PLA nanofibers remained unbroken until reaching 10.69 MPa, which is much higher than the tensile strengths of the individual layers or the individual components. Moreover, agar disk diffusion assessment confirmed that the bilayer nanofiber membranes obviously hindered bacterial growth. Cytotoxicity studies showed that the bilayer nanofiber membranes effectively accelerated cell proliferation. The investigated PCL/ZnO-CSLE/PLA bilayer nanofibers have potential for use as membranes for wound dressing applications.

Microscale and Macroscale Deformation Behavior of Electrospun Polymeric Nanofiber Membranes Using In Situ SEM during Mechanical Testing.

Electrospun nanofiber membranes show high potential in various application fields (e.g., filtration, catalysis, and sensing). Nevertheless, knowledge of the mechanical behavior, and more specifically, the deformation of nanofiber membranes is still limited today which can complicate the appliance of nanofiber membranes in applications where they are mechanically loaded. In this paper, we, therefore, analyzed the mechanical behavior of polymeric nanofiber membranes with different fiber orientations (random and aligned) extensively. Polyamide 6 was used as a representative reference polymer for proof-of-concept. Mechanical tests show that all membranes have a coherent deformation behavior at the macroscale up to the point of fracture. Large variations in stiffness, ultimate strength, and ultimate strain were observed between membranes with different fiber orientations (Random: E-mod: 370 ± 34 MP; UTS: 38.5 ± 6.0 MPa; εmax: 30.0 ± 2.8%; Parallel aligned: E-mod: 753 ± 11 MPa; UTS: 55.4 ± 0.8 MPa; εmax: 12.0 ± 0.1%; Perpendicular aligned: E-mod: 24.1 ± 3.7 MPa; UTS:/; εmax: >40%). This shows the versatility and tunability of the mechanical behavior of these nanofiber membranes. At the microscale, the fibrous structure results in deformation mechanisms that resist failure formation and progression when the membrane is mechanically loaded. This results in a high fracture resistance, even for pre-damaged membranes. Realignment of the fibers along the loading direction causes crack tip blunting, locally reinforcing the membrane.

Green-Solvent-Processable Composite Micro/Nanofiber Membrane with Gradient Asymmetric Structure for Efficient Microfiltration.

Electrospinning technology has attracted extensive attention in recent decades and is widely used to prepare nanofiber membranes from hundreds of polymers. Polyvinyl formal acetal (PVFA), as a polymer with excellent properties such as high strength and heat resistance, is not reported on the electrospun water treatment membrane. In this paper, the preparation process of electrospun PVFA nanofiber membrane is optimized, and the effect of sodium chloride (NaCl) addition on the physical and mechanical properties and microfiltration performance of nanofiber membrane is also explored. And the hydrophobic PVFA nanofiber filter layer is then combined with a hydrophilic nonwoven support layer to construct a composite micro/nanofiber membrane with a pore-size gradient structure and a hydrophilic/hydrophobic asymmetric structure. Finally, unidirectional water transport and water treatment performance are further investigated. The results show that the tensile breaking strength of the composite membrane can reach up to 37.8 MPa, the retention rate for particles with the size of 0.1-0.3 µm is 99.7%, and the water flux is 513.4 L m-2 h-1 under the hydrostatic pressure. Moreover, it still has a retention of more than 98% after three repeated uses. Therefore, the electrospun PVFA composite membrane has a great potential in microfiltration.

Sustained Release of Dicumarol via Novel Grafted Polymer in Electrospun Nanofiber Membrane for Treatment of Peritendinous Adhesion.

The prevention and treatment of post-traumatic peritendinous adhesion (PA) have always been a great difficulty for orthopedic surgeons. Current treatments include resecting surgery, non-steroidal anti-inflammatory drugs (NSAIDs) usage and implantable membranes, often target single disease pathogenic processes, resulting in unfavorable therapeutic outcomes. Here a polylactic acid (PLA)-dicumarol conjugates-electrospun nanofiber membrane (ENM) (PCD) is generated, which can achieve spatial accuracy and temporal sustainability in drug release. It is further demonstrated that PCD possesses a significantly higher and more sustainable drug release profile than traditional drug-loading ENM. By providing a physical barrier and continuous releasing of dicumarol, PCD implantation significantly reduces tissue adhesion by 25%, decreases fibroblasts activity and inhibits key fibrogenic cytokine transforming growth factor beta (TGFß) production by 30%, and improves the biomechanical tendon property by 14.69%. Mechanistically, PCD potently inhibits the connexin43 (Cx43) and thereby tunes down the fibroblastic TGFß/Smad3 signaling pathway. Thus, this approach leverages the anti-adhesion effect of dicumarol and drug release properties of grafted copolymer ENM by esters to provide a promising therapeutic strategy for patients who suffer from PA.

Construction of Covalent Organic Framework Nanofiber Membranes for Efficient Adsorption of Antibiotics.

Techniques beyond crystal engineering are critical for manufacturing covalent organic frameworks (COFs) and to explore them for advanced applications. However, COFs are normally obtained as insoluble, unmeltable, and thus nonprocessible microcrystalline powders. Therefore, it is a significant challenge to implement COFs into larger architectures and structural control on different length scales. Herein, a facile strategy is presented to prepare flexible COF nanofiber membranes by in-situ growth of COFs on polyacrylonitrile (PAN) nanofiber substrates via a reversible polycondensation-termination approach. The obtained PAN@COF nanofiber membranes with vertically aligned COF nanoplates combine a large functional surface with efficient mass transport, thus making it a promising adsorbent, for example, for water purification. The antibiotic pollutant ofloxacin (OFX) is removed from water with a superior absorption capacity of ≈236 mg g-1 and removal efficiency as high as 98%. The here presented in-situ growth of COFs on nanofiber membranes can be extended to various Schiff base-derived COF materials with different compositions, providing a highly efficient way to construct flexible COF-based membranes for several applications.

Scalable Fabrication of Electrospun True-Nanoscale Fiber Membranes for Effective Selective Separation.

Electrospun fibers have received wide attention in various fields ranging from the environment and healthcare to energy. However, nearly all electrospun fibers suffer from a pseudonanoscale diameter, resulting in fabricated membranes with a large pore size and limited separation performance. Herein, we report a novel strategy based on manipulating the equilibrium of stretch deformation and phase separation of electrospun jets to develop true-nanoscale fibers for effective selective separation. The obtained fibers present true-nanoscale diameters (∼67 nm), 1 order of magnitude less than those of common electrospun fibers, which endows the resultant membranes with remarkable nanostructural characteristics and separation performances in areas of protective textiles (waterproofness of 113 kPa and breathability of 4.1 kg m-2 d-1), air filtration (efficiency of 99.3% and pressure drop of 127.4 Pa), and water purification (flux of 81.5 kg m-2 h-1 and salt rejection of 99.94%). This work may shed light on developing high-performance separation materials for various applications.