RESUMEN
In restorative dentistry, the lack of occlusal space may lead to the mutilation of healthy tissue in order to provide sufficient space for the restorative material. Noprep dentistry can be achieved by placing high-bite restorations, followed by Simple Orthodontic Extrusion (SOE) of other teeth to close the created open bite. This rapid, partial orthodontic treatment is well accepted by patients as it can be easily performed using simple buttons, and it takes only a few weeks to reestablish occlusal contacts. The SOE technique is a further development of the Dahl concept. It has the advantages without the disadvantages. Two applications of this technique are presented in this article: the treatment of the severe wear of anterior teeth with no-prep palatal veneers made of Polymer-infiltrated Ceramic Network (PICN, 'hybrid ceramic') material and the realization of no-prep zirconia resin-bonded bridges (RBBs) to replace missing lateral incisors. An original 3D-printed resin guide for correctly positioning RBBs and facilitating the removal of excess composite cement is also presented. This work highlights the considerable advantages of multidisciplinary collaboration in the field of minimally invasive dentistry.
Asunto(s)
Coronas con Frente Estético , Humanos , Femenino , Incisivo , Mordida Abierta/terapia , Dentadura Parcial Fija con Resina Consolidada , Circonio/química , Desgaste de los Dientes/terapiaRESUMEN
BACKGROUND: Enamel conditioning with 37% phosphoric acid is the most common technique during orthodontic bracket bonding procedures. However, due to the repeated de-bonding of the orthodontic brackets during treatment, other methods were needed to condition the enamel surface and increase the bond strength. This study aimed to compare the effect of conditioning the enamel surface by sandblasting with aluminum oxide particles or 5.25% sodium hypochlorite gel in combination with acid etching compared to acid etching alone on shear bond strength (SBS). MATERIAL AND METHODS: One hundred eight extracted upper premolars were randomly divided into three groups according to the conditioning enamel surface method. After the first and second bonding of metal brackets, new metal brackets were bonded with a total-etching adhesive after enamel conditioning using different methods: acid etching only (37% phosphoric acid for 30 seconds) (AE group), sodium hypochlorite associated with acid etching (5.25% NaOCl gel for 60 seconds and then acid etching for 30 seconds) (NaOCl-AE group), and sandblasting associated with acid etching (sandblasting for five seconds and then acid etching for 30 seconds) (SB-AE group). The shear bond strengths of the brackets were tested with a universal testing machine. One-way analysis of variance (ANOVA) and Tukey's honestly significant difference (HSD) tests were used to detect significant differences in shear bond strength among groups at the third bonding. Repeated-measure ANOVA and Bonferroni's tests were used to detect significant differences in shear bond strength among the bonding attempts within each group. RESULTS: 5.25% sodium hypochlorite associated with the acid etching method produced significantly greater shear bond strength than sandblasting associated with acid etching and acid etching only methods at the third bonding (16.40 ± 5.80 MPa, 13.60.47 ± 6.40 MPa, and 9.90 ± 4.40 MPa, respectively; P < 0.001). However, there was no significant difference between the AE and SB-AE groups (P = 0.247). In addition, we found a significant decrease in the shear bond strength within each group after each bonding attempt. CONCLUSION: Conditioning the enamel surface with 5.25% sodium hypochlorite associated with acid etching produced greater bond strength than conditioning by sandblasting associated with acid etching and acid etching only at the third bonding. The bond strength of the metal bracket decreased with increasing bonding attempts, even with the application of enamel surface conditioning methods.
RESUMEN
Introduction: The pathological teeth migrations require correct multidisciplinary treatment which consists of periodontal surgery associated with early or late orthodontic treatment. The aim of this study was to know which of the two orthodontic treatments would have a better periodontal response. Material and Method: Two parameters, radiological (the height of the alveolar bone) and clinical (the depth of the periodontal pocket), were used to meet the objective of this work. Eighteen patients received early orthodontic treatment (straight wire appliance) after periodontal flap debridement surgery and eighteen others late orthodontic treatment (straight wire appliance). Results: The results showed the absence of significant difference between the two early and late orthodontic treatments after periodontal flap debridement surgery. Conclusion: Orthodontic treatment can be started early seven to ten days after periodontal surgery.
Introduction: Les migrations dentaires pathologiques exigent un traitement pluridisciplinaire correct qui consiste en une chirurgie parodontale associée à un traitement orthodontique précoce ou tardif. Le but de cette étude était de connaître lequel des deux traitements orthodontiques aurait une meilleure réponse parodontale. Matériel et méthode: Deux paramètres, radiologique (la hauteur du défaut osseux) et clinique (la profondeur de la poche parodontale), ont été utilisés afin de répondre à l'objectif de ce travail. Dix-huit patients ont reçu, après la chirurgie parodontale par un lambeau d'assainissement, un traitement orthodontique précoce (technique d'arc droit) et dix-huit autres un traitement orthodontique tardif (technique d'arc droit). Résultats: Les résultats ont montré l'absence de différence significative entre les deux traitements orthodontiques, précoce et tardif, après la chirurgie parodontale par un lambeau d'assainissement. Conclusion: Le traitement orthodontique peut débuter précocement dès sept à dix jours après la chirurgie parodontale.
Asunto(s)
Migración del Diente , Humanos , Femenino , Masculino , Adulto , Migración del Diente/etiología , Migración del Diente/terapia , Factores de Tiempo , Pérdida de Hueso Alveolar/etiología , Colgajos Quirúrgicos/cirugía , Persona de Mediana Edad , Desbridamiento Periodontal/métodos , Ortodoncia Correctiva/métodos , Adulto Joven , Bolsa Periodontal/cirugía , Bolsa Periodontal/etiologíaRESUMEN
Introduction: The aligner is a thermoformed plastic device composed of various chemical components: polyurethane, polyethylene terephthalate glycol, polypropylene All these plastics must be sufficiently resistant to abrasion and translucent for aesthetic purposes, but their solubility to salivary enzymes, insertion-disinsertion fatigue and recyclability vary according to material. From an orthodontic point of view, they must facilitate tooth movement. However, their behavior differs from that of orthodontic archwires: their Young's modulus, resilience and unloading curve are distinct, resulting in mechanical properties that fall significantly below the orthodontic requirements of multi-bracket systems. Objective: The aim of this article was to review the chemical composition, recycling and mechanical properties of aligners, and to put them into perspective with therapeutic indications. Materials and Methods: Literature data were approximated to orthodontic needs. Results: Neither plastic nor direct printing can match the mechanical properties of our archwires or the procedures of a reliable vestibular multi-attachment appliance. Discussion: Aligners remain an interesting tool in targeted indications.
Introduction: L'aligneur est un dispositif en plastique thermoformé dont la composition chimique est diverse : polyuréthane, polyéthylène téréphtalate glycol, polypropylène Tous ces plastiques doivent être suffisamment résistants à l'abrasion et translucides pour être esthétiques mais ils présentent une solubilité aux enzymes salivaires, une fatigue liée à l'insertion-désinsertion et une recyclabilité qui sont variables selon le matériau. D'un point de vue orthodontique, ils doivent permettre de déplacer les dents. Mais leur comportement ne ressemble pas à celui des arcs orthodontiques : leur module de Young, leur résilience et leur courbe de décharge en sont éloignés et confèrent des propriétés mécaniques très inférieures aux exigences orthodontiques des appareils multi-attaches. Objectif: L'objectif de l'article était de faire le point sur la composition chimique, le recyclage, les propriétés mécaniques des aligneurs et de les mettre en perspective avec les indications thérapeutiques. Matériel et méthode: Les données de la littérature sont approchées des besoins orthodontiques. Résultats: Ni le plastique, ni l'impression directe ne sont en capacité de rivaliser avec les propriétés mécaniques de nos arcs ou avec les procédures d'un appareil multi-attache vestibulaire fiables. Discussion: Les aligneurs restent un outil intéressant dans des indications ciblées.
Asunto(s)
Técnicas de Movimiento Dental , Humanos , Técnicas de Movimiento Dental/métodos , Técnicas de Movimiento Dental/instrumentación , Reciclaje/métodos , Poliuretanos/química , Alambres para Ortodoncia , Diseño de Aparato Ortodóncico , Módulo de Elasticidad , Polietilenglicoles/química , Ensayo de Materiales/métodos , Tereftalatos PolietilenosRESUMEN
Introduction: The arrival date young patient's first orthodontic consultation is unrestricted but may influence the choice of treatment plan as well as its modalities. The objective of this study was to determine the factors that influence the date of the first consultation at the orthodontic office: advice from a third party or a health professional, the patient's gender, the socioeconomic level, the actual need for orthodontic treatment, and the vertical and anteroposterior skeletal dysmorphia. Materials and Methods: Young patient's file younger than 16 years were systematically included. A Wilcoxon and Kruskal-Wallis test was performed in univariate and multivariate analysis. The threshold was 5%. Results: 456 young patients were included. Anteroposterior skeletal discrepancy, referral by an acquaintance, and socioeconomic level appeared to be factors influencing patient arrival date. Gender, actual need for orthodontic treatment, referral from a health professional, and vertical skeletal discrepancy did not influence the arrival date at the office. Discussion: The date of consultation is not related to the actual orthodontic treatment need. Word-of-mouth seems to play an important role. Patients seem to relate an anteroposterior discrepancy to the need to consult an orthodontist, but do not relate it to vertical discrepancy, although ventilation may be related to severe dysmorphia. Conclusion: This study encourages more communication about orthodontic treatment indications with patients and caregivers.
Introduction: La date d'arrivée du jeune patient en première consultation orthodontique est libre mais peut influencer le choix du plan de traitement, ainsi que ses modalités. L'objectif de cette étude était de déterminer les facteurs qui influencent la date de première consultation au cabinet d'orthodontie : le conseil d'un tiers ou d'un professionnel de santé, le genre du patient, le niveau socio-économique, le besoin réel de traitement orthodontique, la dysmorphie squelettique verticale et antéro-postérieure. Matériels et méthodes: Les dossiers de jeunes patients de moins de 16 ans ont été systématiquement inclus. Un test de Wilcoxon et Kruskal-Wallis a été effectué en analyse univariée et multivariée. Le seuil retenu était de 5 %. Résultats: Au total, 456 patients ont été inclus. Le décalage squelettique antéro-postérieur, le fait d'être adressé par une connaissance et le niveau socio-économique semblent être des facteurs influençant la date d'arrivée du jeune patient. Le genre, le besoin réel de traitement orthodontique, le fait d'être adressé par un professionnel de santé, le décalage squelettique vertical n'ont pas d'influence sur la date d'arrivée au cabinet. Discussion: La date de consultation n'est pas liée au besoin réel de traitement. Le bouche à oreille semble jouer un rôle important. Les patients semblent faire le lien entre un décalage antéro-postérieur et la nécessité de consulter un orthodontiste, mais ne le font pas pour le décalage vertical alors que la ventilation peut être liée à des dysmorphies sévères. Conclusion: Cette étude encourage à communiquer davantage sur les indications de traitement orthodontique avec les patients et les soignants.
Asunto(s)
Ortodoncia Correctiva , Humanos , Masculino , Femenino , Adolescente , Niño , Ortodoncia Correctiva/métodos , Ortodoncia Correctiva/estadística & datos numéricos , Derivación y Consulta/estadística & datos numéricos , Factores de Tiempo , Maloclusión/terapia , Factores Socioeconómicos , Consultorios Odontológicos/estadística & datos numéricos , Ortodoncia/métodos , Ortodoncia/estadística & datos numéricos , Factores SexualesRESUMEN
BACKGROUND: Orthodontic treatment requires good oral hygiene for successful completion of treatment. As protocol, patients are usually given instructions for oral hygiene and diet at the start of treatment, however, they are not fully followed. Different methods are employed in order to increase patient compliance including digital means, however, these are not possible in teaching hospitals with high burden of patient care and limited resources. The present study aims to correlate the patient reported behavior with their clinical findings and treatment need. This will enable us to identify potential sources of motivation which will be incorporated in daily practice and enable us to improve methods to enhance patient's behavior. METHOD: A cross-sectional study was conducted in the orthodontic department of a semi-government teaching hospital from August to October 2023 using a modified questionnaire. The clinical examination was done using a Community Periodontal Index for Treatment Need-C (CPITN-C) probe. The diagnosis of presenting clinical conditions and treatment need was done using Community Periodontal Index for Treatment Need (CPITN) and Gingival Bleeding Index (BI). Data collected was analyzed for frequencies and correlation was done using Spearman Correlation Coefficient. P- value ≤ 0.05 was taken as statistically significant. RESULT: The sample size consisted of 110 patients of which 60% were entitled to receive treatment. The predominant age group was 15-20 years (39.1%). Approximately 70% patients were in code 1 for CPITN and GI and in need of oral hygiene instructions. Overall patients' showed good level of awareness, however, they were not compliant in behavior. CONCLUSION: Although patients showed a good level of awareness towards oral hygiene practices, there was a lack of compliance in following them. Patients were more concerned for being affected by dental caries due to poor oral hygiene than its effect on overall treatment outcome.
Asunto(s)
Higiene Bucal , Humanos , Estudios Transversales , Femenino , Masculino , Adolescente , Enfermedades Periodontales/terapia , Adulto , Adulto Joven , Encuestas y Cuestionarios , Índice Periodontal , Cooperación del Paciente , Ortodoncia CorrectivaRESUMEN
A smile that reveals >4 mm of gum tissue is called a gummy smile (GS), offering negative impacts on people's self-confidence and aesthetic appearance. The treatment for GS should be planned according to underlying causes such as altered passive eruption of teeth, dentoalveolar extrusion, vertical maxillary excess, and short or hyperactive lip muscles. In this case report, a patient with severe GS received orthodontic and gingivoplasty treatment, aided by digital tools such as 3D simulation, smile design, and 3D printed guides. The treatment yielded remarkable and satisfactory results, without the need for extensive surgery. Our findings suggest that gingivoplasty is a minimally invasive, time- and cost-effective alternative to more extensive procedures for correcting severe gum recession.
RESUMEN
Orthodontics is undergoing a digital revolution, transforming traditional techniques with modern technology. This evolution is driven by the need for precise diagnosis and treatment planning. Digital platforms, including digital radiography and cone beam computed tomography (CBCT), are replacing conventional methods, enhancing documentation, analysis, and appliance production. Three-dimensional imaging enables customized treatment plans and appliance design using computer-aided design and computer-aided manufacture (CAD/CAM). Integration of digital models and software facilitates treatment simulation and patient communication. Digital videography enhances diagnostic capabilities. Embracing digital processes is essential for improved patient care and practice efficiency in orthodontics. This review article on digital orthodontics aims to provide a comprehensive overview and critical analysis of the current advancements, technologies, applications, benefits, and challenges in the field of orthodontics utilizing digital tools and technologies.
RESUMEN
Light Amplified Stimulated Emission of Radiation (LASER) therapy has been the subject of numerous researches as an auxiliary method in orthodontic practice. Therefore, it is of interest to assess the clinical evaluation of laser assisted soft tissue procedures for orthodontic treatment. The soft tissue surgical procedures carried out were aestheticre-contouring, gingivectomy, maxillary frenectomy, operculectomy and surgical exposure of impacted canines. The clinical outcomes evaluated in each patient were post-operative pain, bleeding during surgical procedure. In our study, clinical evaluation of outcomes in both categories revealed reduced pain at 1 hour and 24 hour after surgical procedures in patients who underwent surgery with LASER.. Soft tissue Laser can be an alternative to conventional surgery for soft tissue surgeries in orthodontics with better pain relief and reduced bleeding.
RESUMEN
This study aimed to synthesize a novel elastomeric ligature with dimethylaminohexadecyl methacrylate (DMAHDM) grafted, providing a new strategy for improving the issue of enamel demineralization during fixed orthodontics. DMAHDM was incorporated into elastomeric ligatures at different mass fractions using ultraviolet photochemical grafting. The antibacterial properties were evaluated and the optimal DMAHDM amount was determined based on cytotoxicity assays. Moreover, tests were conducted to evaluate the in vivo changes in the mechanical properties of the elastomeric ligatures. To assess the actual in vivo effectiveness in preventing enamel demineralization, a rat demineralization model was established, with analyses focusing on changes in surface microstructure, elemental composition, and nanomechanical properties. Elastomeric ligatures with 2% DMAHDM showed excellent biocompatibility and the best antibacterial properties, reducing lactic acid production by 65.3% and biofilm bacteria by 50.0% within 24 h, without significant mechanical property differences from the control group (p > 0.05). Most importantly, they effectively prevented enamel demineralization in vivo, enhancing elastic modulus by 73.2% and hardness by 204.8%. Elastomeric ligatures incorporating DMAHDM have shown great potential for application in preventing enamel demineralization, providing a new strategy to solve this issue during fixed orthodontics.
Asunto(s)
Esmalte Dental , Elastómeros , Desmineralización Dental , Desmineralización Dental/prevención & control , Animales , Elastómeros/química , Ratas , Esmalte Dental/efectos de los fármacos , Antibacterianos/farmacología , Antibacterianos/química , Metacrilatos/química , Metacrilatos/farmacología , Aparatos Ortodóncicos , Biopelículas/efectos de los fármacos , MasculinoRESUMEN
OBJECTIVE: To investigate the accuracy of full arch scans taken using the iTero Element 2® under clinical settings. DESIGN: Prospective clinical study. METHODS: A customised upper removable appliance (URA) with four spheres (A-D) was fabricated from a maxillary arch iTero® scan for a 24-year-old patient. Six linear values were measured on the URA using a high-accuracy coordinate measuring machine. A total of 60 intra-oral iTero® scans were taken by two operators (HA and AS) with the test URA inserted to the participant's maxillary dentition at T1 and T2. Geomagic Control X software was used to measure the six linear distances between the reference spheres (1-4) in all scans. Comparisons between distances on full arch scans to true distances on the URA were made to evaluate accuracy. RESULTS: The median distance to the prepared bench top URA mean was significantly away from zero for each operator and timepoint across all measurements except AD versus 14 and BD versus 24. Statistically significant, although clinically non-significant, differences in median linear distances in relation to the prepared benchtop URA were observed between evaluators in segments AB versus 12 (operator 1 -0.021 mm vs. operator 2 -0.06 mm) and AC vs. 13 (operator 1 -0.044 mm vs. operator 2 -0.167 mm) at T1. CONCLUSION: The accuracy of scanners is defined as the trueness and precision of the captured scans to the dental arches. The accuracy of iTero Element 2® is acceptable for diagnosis and treatment planning in orthodontics. Length and location of the scanned segment and scanning sequence 'protocol' affect accuracy.
RESUMEN
BACKGROUND: Bone defects around the teeth affect a large portion of the population. Bone regeneration in the area of existing teeth is completely different from that in an edentulous area. To date, no method has been developed for three-dimensional (3D) bone reconstruction in regions with preserved teeth. OBJECTIVES: This study aimed to radiologically evaluate the results of the new method of 3D mandibular bone reconstruction in preserved dentition using a custom-made allogeneic bone block with a 6-month follow-up. MATERIAL AND METHODS: Alveolar ridge dimensions were radiographically assessed before and 6 months after reconstruction using cone beam computed tomography (CBCT) scans in 32 patients (192 teeth). Reconstruction used a bone block that had been previously planned and prepared using CAD/CAM technology. RESULTS: The observed changes in alveolar bone dimensions were highly significant in most cases (p < 0.001). The closer to the tooth root apex, the lower the bone growth in the sagittal dimension (average of the mean values for each tooth examined in the measured heights): CEJ2: 2.9 mm, ½ CEJ2: 2.7 mm, » CEJ2: 1.9 mm, and API: 1.4 mm. The maximum bone growth in the vertical dimension was observed on tooth 43 (9.9 mm), followed by 32 (9.8 mm), 33 (8.5 mm), 31 (8.4 mm), 42 (8 mm), and 41 (7 mm). The degree of decrease in vestibular dehiscence of the bone was greater the closer the tooth was to the midline (average of -3.8 mm and -3.4 mm for the central incisors; average of -2.8 mm and -2.6 mm for the lateral incisors; average of -2.6 mm and -2.5 mm for the canines). CONCLUSIONS: The results prove that it is possible to prevent bone dehiscence in patients undergoing orthodontic treatment, increasing the ability and effectiveness of covering recessions and improving the morphology of the lower part of the face.
RESUMEN
One of the biggest controversies in current orthodontics is determining the appliance to use, since today patients seek better results in shorter times, in addition to putting aesthetics first. OBJECTIVE: compare the benefits and disadvantages that arise when using fixed orthodontic appliances and transparent aligners. MATERIALS AND METHODS: An investigation and compilation of specialized bibliographic information on the topic was carried out in scientific search engines such as PubMed, SciElo and Web of Science between the years 1991 to 2023, focused on research work related to the effects of the use of orthodontic appliances. fixed compared to clear aligners. RESULTS: The review was carried out based on 53 articles found that met the selection criteria. CONCLUSION: Fixed orthodontic appliances are better in complex cases, they are more precise and less likely to relapse; Transparent aligners are more aesthetic, hygiene is more affective and the bone density of the mandibular condyle decreases.
RESUMEN
The article presents a case of a 13-year-old adolescent male patient who started orthodontic treatment at the age of 12. Before treatment, he was diagnosed with narrow maxilla, proclination of upper incisors, deep overbite, distal occlusion bilaterally with significant sagittal overjet in frontal area, skeletal Class II, and hypodivergent growth pattern. During treatment, the patient is in his pubertal growth spurt. About 2 months after intermaxillary Class II elastics (1/4 heavy, 6.5 Oz) were applied, he complained of pain during mastication, wide opening of the mouth, and sometimes during protrusive and lateral movements in the right TMJ. The TMJ X-ray examination did not reveal abnormal morphological changes. Occlusion was evaluated by an electromyographic device, Teethan. The result was typical for Class II malocclusion. During the bilateral palpation of the zones of TMJ and opening of the mouth and chewing, the patient reported pain on the right side. There was no clicking in the joint. The elastic wear was stopped, and soon afterwards, the pain disappeared. These complaints point to a possible relationship between orthodontic treatment and TMJ pain. However, the disappearance of complaints after the removal of the Class II elastics points that the temporomandibular joint disorder (TMD) symptoms are reversible and resolved.
RESUMEN
Background: This longitudinal prospective study aimed to assess orthodontic patients' immune system response to metal ion release in saliva. Methods: Thirty adult patients (18-35 years) were equally divided into three groups: groups at the end (G1) and beginning (G2) of multibracket appliances (MBA) treatment and a non-treated control group (G3). Participants were evaluated at four timepoints within 21 days, with saliva samples being analyzed for metal ion concentrations and blood for the lymphocyte transformation test (LTT). Results: There were no significant differences between groups or timepoints for saliva. LTT analyses revealed hypersensitivity in one-third of all patients and 50% of G2 for nickel, with three developing sensitizations after MBA insertion. All nickel-sensitized patients exhibited varying elevated saliva nickel concentrations. The most nickel-sensitized patients had low ion saliva loads. In borderline nickel-sensitization cases, saliva ion concentrations were up to 20 times higher than the reference. Hypersensitivity to palladium, gold, and mercury was also observed. Conclusions: These findings indicate that increased MBA ion release was not inherently linked to the immune response (Type-IV sensitization), as reactions occurred even with ion levels below thresholds. This underlines the need for a comprehensive evaluation of the immune response to metal ion release in orthodontic patients.
RESUMEN
Early loss of deciduous teeth is a challenging situation to handle. In recent years, the loss of deciduous teeth has become very frequent because of the increased risk of caries. Space maintainers play a vital role in preventing space loss. Lingual arch space maintainers are effectively used to maintain space in the lower arch. In order to retain the length of the lower arch and to prevent mesial migration of the mandibular first permanent molar, lingual arch space maintainers are often indicated. Conventional lingual arch fabrication is technique-sensitive and cumbersome. Additionally, it has many documented drawbacks like solder breakage, cement loss, soft tissue lesions, etc. With the advent of newer technology like three-dimensional (3D) printing, the fabrication of appliances and prostheses has become more predictable, accurate, and relatively easier. The present case report highlights the technique and advantages of 3D printing to fabricate lingual arch space maintainers, which has the potential to revolutionize preventive orthodontics in pediatric dentistry.
RESUMEN
OBJECTIVE: This clinical study aimed to evaluate the difference in the time of application phase, employing the conventional and modified direct orthodontic bonding method. MATERIALS AND METHODS: Thirty patients who needed orthodontic therapy with fixed appliances were randomly divided into two equal groups (n = 15): the control and experimental group, according to the bonding method applied. A total of 600 metal brackets inch slot 0.022 (Mini Sprint®, Forestadent, Germany) were bonded to incisors, canines, and premolars using the light-cured adhesive Transbond XT (3M Unitek, Monrovia, CA, USA). The failure rates of the brackets were evaluated within 12 months. The independent samples t-test was applied. The Chi-square test and Fisher exact test were used for statistical analysis. RESULTS: The initial bonding time using the modified method was significantly shorter (3.27 min or 17.1% per patient) compared with the conventional bonding method (p < 0.001). Number of failed brackets between the two methods did not differ significantly (p = 0.226). CONCLUSION: The time of the application phase in initial bonding using the modified method (experimental group) was shorter than in control group. There was no statistically significant difference in the number of bond failures between the two methods. CLINICAL SIGNIFICANCE: The modified application phase of direct orthodontic bracket placement shortens the total bonding time and facilitates the manual work of orthodontists.
RESUMEN
OBJECTIVE: The aim of this study was to evaluate changes in shape of the palatal vault after maxillary expansion with hyrax expander (HE) and leaf expander (LE), using 3D Geometric Morphometric Analysis. SETTING AND SAMPLE POPULATION: Overall, 250 patients (110 M, 140 F) with maxillary transverse deficiency were selected for this study. In this study, 127 subjects were treated with HE, 123 with LE. MATERIALS AND METHODS: Digital dental models were obtained pre-treatment (T0) and after 12 months from the cementation of the device (T1) and processed by means of a digital scanner. Linear and morphometric analyses were conducted to determine the effects of each appliance on dental measurements and palatal shape, and a multiple linear regression was performed to analyse the influence of anchorage and appliance type on final shape. RESULTS: Morphometric analysis showed that there was a lowering of the palatal vault in the HE group, while in the LE group it remained unchanged: the difference in palatal shape at time T0 and T1 was statistically significant in both treatments (HE vs. LE). In the HE group, the change in shape also included the upper part of the palatal vault in the vertical dimension, while in the LE group the change in shape interested mainly palatal shelves and the lower portion of the palate. CONCLUSIONS: Both LE and HE produce clinically significant changes in the morphology of the palatal vault.
RESUMEN
A thorough comprehension of age-related variances in orthodontic tooth movement (OTM) and bone remodeling response to mechanical force holds significant implications for enhancing orthodontic treatment. Mitophagy plays a crucial role in bone metabolism and various age-related diseases. However, the impact of mitophagy on the bone remodeling process during OTM remains elusive. Using adolescent (6 weeks old) and adult (12 months old) rats, we established OTM models and observed that orthodontic force increased the expression of the mitophagy proteins PTEN-induced putative kinase 1 (PINK1) and Parkin, as well as the number of tartrate-resistant acid phosphatase-positive osteoclasts and osteocalcin-positive osteoblasts. These biological changes were found to be age-related. In vitro, compression force loading promoted PINK1/Parkin-dependent mitophagy in periodontal ligament stem cells (PDLSCs) derived from adolescents (12-16 years old) and adults (25-35 years old). Furthermore, adult PDLSCs exhibited lower levels of mitophagy, impaired mitochondrial function, and a decreased ratio of RANKL/OPG compared to young PDLSCs after compression. Transfection of siRNA confirmed that inhibition of mitophagy in PDLSC resulted in decreased mitochondrial function and reduced RANKL/OPG ratio. Application of mitophagy inducer Urolithin A enhanced bone remodeling and accelerated OTM in rats, while the mitophagy inhibitor Mdivi-1 had the opposite effect. These findings indicate that force-stimulated PDLSC mitophagy contributes to alveolar bone remodeling during OTM, and age-related impairment of mitophagy negatively impacts the PDLSC response to mechanical stimulus. Our findings enhance the understanding of mitochondrial mechanotransduction and offer new targets to tackle current clinical challenges in orthodontic therapy.
Asunto(s)
Mitocondrias , Mitofagia , Osteoprotegerina , Ligamento Periodontal , Ligando RANK , Técnicas de Movimiento Dental , Animales , Mitofagia/fisiología , Ratas , Ligando RANK/metabolismo , Ligamento Periodontal/metabolismo , Osteoprotegerina/metabolismo , Mitocondrias/metabolismo , Masculino , Proteínas Quinasas/metabolismo , Ratas Sprague-Dawley , Adolescente , Ubiquitina-Proteína Ligasas/metabolismo , Ubiquitina-Proteína Ligasas/genética , Células Madre/metabolismo , Remodelación Ósea/fisiología , Células CultivadasRESUMEN
Mandibular asymmetry refers to dimensional differences between the left and right sides of the mandible in terms of size, form and volume. This condition may result in problems with functionality as well as appearance. Early intervention is often deemed optimal for addressing mandibular asymmetry; however, there is a lack of consensus regarding the diagnostic approach and strategy for identifying asymmetries in developing individuals. The purpose of this narrative review (NR) is to provide a clinician-focused update on the radiographic techniques for identifying mandibular asymmetries in orthodontic patients. Selective database searches were conducted until November 2023 to assess the available literature on mandibular asymmetry diagnosis. A health-sciences librarian developed a search strategy utilizing appropriate terms associated with mandibular asymmetry diagnosis. The databases used were Web of Science, Embase, Scopus, Liliacs and PubMed. Fifty-two studies were included in this review and data regarding the evaluation of mandibular asymmetries were presented with a narrative approach delineating clinical indications based on retrieved findings. There is no unanimous consensus on the method for diagnosing mandibular asymmetries. Cone beam computed tomography emerges as the preferred examination method for diagnosing mandibular asymmetry, thanks to the assessment of a 3D structure with a 3D image. However, the use of only orthopantomography could be advisable as a first-line diagnostic tool in children due to less radiation exposure.