The Phase Distribution Characteristics and Interphase Mass Transfer Behaviors of the CO2-Water/Saline System under Gathering and Transportation Conditions: Insights on Molecular Dynamics.

In order to investigate the interphase mass transfer and component distribution characteristics of the CO2-water system under micro-scale and nano-scale transport conditions, a micro-scale kinetic model representing interphase mass transfer in the CO2-water/saline system is developed in this paper. The molecular dynamics method is employed to delineate the diffusion and mass transfer processes of the system's components, revealing the extent of the effects of variations in temperature, pressure, and salt ion concentration on interphase mass transfer and component distribution characteristics. The interphase mass transfer process in the CO2-water system under transport conditions can be categorized into three stages: approach, adsorption, and entrance. As the system temperature rises and pressure decreases, the peak density of CO2 molecules at the gas-liquid interface markedly drops, with their aggregation reducing and their diffusion capability enhancing. The specific hydration structures between salt ions and water molecules hinder the entry of CO2 into the aqueous phase. Additionally, as the salt concentration in water increases, the density peak of CO2 molecules at the gas-liquid interface slightly increases, while the density value in the water phase region significantly decreases.

Study on the integrated self-priming process of a vehicle-mounted self-priming pump.

In order to explore the self-priming characteristics of the self-priming pump at the mobile pump truck, this paper established a complete three-dimensional circulatory piping system including the self-priming pump, tank, valves, inlet pipe and outlet pipe. The UDF(User Defined Functions) was used to realize the acceleration-constant speed operation process of the impeller, thus reflecting the actual changing state of the rotational speed. Based on the VOF(Volume Of Fluid) multiphase flow model and the Realizable k-ε turbulence model, a coupled numerical calculation of unsteady incompressible viscous flow was conducted for its self-priming process. The results show that the self-priming process of the pump can be roughly divided into four stages: the rapid suction stage, the shock exhaust stage, the rapid exhaust period and the pump residual gas discharge stage. The proportion of each stage in the total self-priming time showed an increasing trend. During the rapid suction stage, the water level in the vertical section of the inlet pipe showed a slow and then fast-rising pattern. During the shock exhaust stage, the average gas-phase volume fraction in the volute is lower than that of the impeller, and the gas content at the volute outlet is lower than that of the impeller inlet. The region at the inlet and outer edge of the impeller consistently experience significant energy losses.

Intact NMR Approach Quickly Reveals Synchronized Microstructural Changes in Oil-in-Water Nanoemulsion Formulations.

A soft-core oil-in-water (o/w) nanoemulsion (NE) is composed of nanometer (nm) sized oil droplets, stabilized by a surfactant layer and dispersed in a continuous bulky water phase. Characterization of the o/w NE molecule arrangements non-invasively, particularly the drug phase distribution (DPD) and its correlation to oil globule size (OGS), remains a challenge. Here we demonstrated the analytical methods of intact 19F Nuclear Magnetic Resonance (NMR) and 1H diffusion ordered spectroscopy (DOSY) NMR for their specificity in measuring DPD and OGS, respectively, on three NE formulations containing the active ingredient difluprednate (DFPN) at the same concentration. The results illustrated synchronized molecular rearrangement reflected in the DPD and OGS upon alterations in formulation. Addition of surfactant resulted in a higher DPD in the surfactant layer, and concomitantly smaller OGS. Mechanic perturbation converted most of the NE globules to the smaller thermodynamically stable microemulsion (ME) globules, changing both DPD and OGS to ME phase. These microstructure changes were not observed using 1D 1H NMR; and dynamic light scattering (DLS) was only sensitive to OGS of ME globule in mechanically perturbed formulation. Collectively, the study illustrated the specificity and essential role of intact NMR methods in measuring the critical microstructure attributes of soft-core NE systems quickly, accurately, and non-invasively. Therefore, the selected NMR approach can be a unique diagnostic tool of molecular microstructure or Q3 property in o/w NE formulation development, and quality assurance after manufacture process or excipient component changes.

Occurrence and distribution of pesticides and transformation products in ambient air in two European agricultural areas.

Pesticides present a significant risk for both humans and the environment. However, quantitative data for a broad range of airborne pesticides in agricultural areas are missing. During or after the application, pesticides can reach the atmosphere and partition between the particulate and gaseous phase. As part of the EU project SPRINT, weekly ambient air samples were collected from two agricultural areas in Portugal (vineyard) and the Netherlands (potatoes, onions, and sugarbeet) between April 2021 and June 2022 using high-volume air samplers. The samples were analysed for 329 pesticides, of which 99 were detected. The most frequently detected compounds included the fungicides folpet, fenpropidin and mandipropamid, the insecticide chlorpyrifos-methyl, the herbicide terbuthylazine, and the metabolite prothioconazole-desthio, which were found with detection frequencies between 40 and 57 %. Pesticide concentrations ranged between 0.003 ng/m3 and 10 ng/m3. Remarkably, 97 % of the samples contained at least one pesticide and in 95 % of the samples, pesticide mixtures were present. The calculated particle phase fractions correlated with the octanol-air partitioning coefficient for most of the investigated compounds. Furthermore, calculated daily inhalation rates for individual pesticides and pesticide mixtures were far below the Acceptable Daily Intake (ADI) with a margin of exposure (MOE) of >1000 for the highest calculated daily inhalation rate for a child. However, as this value only includes pesticide intake from food and drinking water and considering that 91 % of the detected pesticides are associated with potential adverse human health effects. These findings highlight the broad range of airborne pesticides in agricultural areas and the need for quantitative data to include the intake of mixtures of highly hazardous pesticides by inhalation in human risk assessment.

Restraint of Nonradiative Recombination via Modulation of n-Phase Distribution through Interfacial Lithium Salt Insertion for High-Performance Pure-Blue Perovskite LEDs.

Quasi-two-dimensional perovskite has been widely used in blue perovskite light-emitting diodes. However, the performance of these devices is still hampered by random phase distribution, nonradiative recombination, and imbalanced carrier transport. In this work, an effective strategy is proposed to mitigate these limitations by inserting lithium salts at the interfaces between the hole transport layer (HTL) and the perovskite layer. The perovskite film on the inserted Li2CO3 layer exhibits reasonable n-value redistribution, which leads to the repressive nonradiation recombination and enhanced carrier transport. Moreover, the inserted Li2CO3 layer also improves the electrical conductivity of PEDOT:PSS and hinders indium ion diffusion from the PEDOT:PSS layer to the perovskite film, which inhibits exciton quenching and nonradiative recombination loss at the HTL/perovskite interface. Taking advantage of these merits, we have successfully fabricated efficient pure-blue PeLEDs with an external quantum efficiency of 6.2% at 472 nm and a luminance of 726 cd cm-2. The restraint of nonradiative recombination at the interface offers a promising approach for efficient pure-blue PeLEDs.

Probing Particle-Carbon/Binder Degradation Behavior in Fatigued Layered Cathode Materials through Machine Learning Aided Diffraction Tomography.

Understanding how reaction heterogeneity impacts cathode materials during Li-ion battery (LIB) electrochemical cycling is pivotal for unraveling their electrochemical performance. Yet, experimentally verifying these reactions has proven to be a challenge. To address this, we employed scanning µ-XRD computed tomography to scrutinize Ni-rich layered LiNi0.6Co0.2Mn0.2O2 (NCM622) and Li-rich layered Li[Li0.2Ni0.2Mn0.6]O2 (LLNMO). By harnessing machine learning (ML) techniques, we scrutinized an extensive dataset of µ-XRD patterns, about 100,000 patterns per slice, to unveil the spatial distribution of crystalline structure and microstrain. Our experimental findings unequivocally reveal the distinct behavior of these materials. NCM622 exhibits structural degradation and lattice strain intricately linked to the size of secondary particles. Smaller particles and the surface of larger particles in contact with the carbon/binder matrix experience intensified structural fatigue after long-term cycling. Conversely, both the surface and bulk of LLNMO particles endure severe strain-induced structural degradation during high-voltage cycling, resulting in significant voltage decay and capacity fade. This work holds the potential to fine-tune the microstructure of advanced layered materials and manipulate composite electrode construction in order to enhance the performance of LIBs and beyond.

Occurrence and dissipation mechanisms of organic contaminants during sewage sludge anaerobic digestion: A critical review.

Sewage sludge, a complex mixture of contaminants and pathogenic agents, necessitates treatment or stabilization like anaerobic digestion (AD) before safe disposal. AD-derived products (solid digestate and liquid fraction) can be used as fertilizers. During AD, biogas is also produced, and used for energy purposes. All these fractions can be contaminated with various compounds, whose amount depends on the feedstocks used in AD (and their mutual proportions). This paper reviews studies on the distribution of organic contaminants across AD fractions (solid digestate, liquid fraction, and biogas), delving into the mechanisms behind contaminant dissipation and proposing future research directions. AD proves to be a relatively effective method for removing polychlorinated biphenyls, polycyclic aromatic hydrocarbons, pharmaceuticals, antibiotic resistance genes and hydrocarbons. Contaminants are predominantly removed through biodegradation, but many compounds, especially hydrophobic (e.g. per- and polyfluoroalkyl substances), are also sorbed onto digestate particles. The process of sorption is suggested to reduce the bioavailability of contaminants. As a result of sorption, contaminants accumulate in the largest amount in the solid digestate, whereas in smaller amounts in the other AD products. Polar pharmaceuticals (e.g. metformin) are particularly leached, while volatile methylsiloxanes and polycyclic aromatic hydrocarbons, characterized by a high Henry's law constant, are volatilized into the biogas. The removal of compounds can be affected by AD operational parameters, the type of sludge, physicochemical properties of contaminants, and the sludge pretreatment used.

Phase distribution graphs for fast, differentiable, and spatially encoded Bloch simulations of arbitrary MRI sequences.

PURPOSE: An analytical approach to Bloch simulations for MRI sequences is introduced that enables time efficient calculations of signals free of Monte-Carlo noise, while providing full flexibility and differentiability in RF flip angles, RF phases, magnetic field gradients and time, as well as insights into image formation. THEORY AND METHODS: We present an implementation of the extended phase graph (EPG) concept implemented in PyTorch, including an efficient state selection algorithm. This simulation is compared with an isochromat-based Bloch simulation with random isochromat distribution as well as with in vivo measurements using the Pulseq standard. Additionally, different sequences are tested and analyzed using this novel simulation approach. RESULTS: Our simulation outperforms isochromat-based simulations in terms of computation time as well as signal quality, without exhibiting any kind of Monte-Carlo noise. The novel approach allows extracting useful information about the magnetization evolution not available otherwise. Our approach extends the common state-tensor-based EPG simulation approach for the contribution of dephased states including spatial encoding and T 2 ' $$ {T}_2^{\prime } $$ effects, and arbitrary timing. This allows calculation of echo shapes in addition to echo amplitudes only. Our implementation provides full differentiability in all input parameters allowing gradient descent optimization. Simulation of non-instantaneous pulses via hard-pulse approximation is left for future work, as the performance and accuracy characteristics are not yet analyzed. CONCLUSIONS: Phase distribution graphs provide fast, differentiable, and spatially encoded Bloch simulations for most MRI sequences. It allows efficient simulation and optimization of arbitrary MRI sequences, which was previously only possible via high isochromat counts.

Simulating the behavior of antioxidant to explore the mechanisms of oxidative stability in Pickering emulsion.

This study explores effective strategies for bolstering emulsion oxidative stability via optimized interfacial distribution of varying hydrophobicity antioxidants (gallic acid, propyl gallate, octyl gallate) in zein nanoparticle (ZP) stabilized Pickering emulsions. Experimental and simulation methods revealed that antioxidant (AO) with higher hydrophobicity or loaded into ZP demonstrated stronger hydrogen bonding and van der Waals interactions with ZP. This increased interfacial loading of antioxidants resulted in improved oxidative stability in Pickering emulsions. The flow, distribution and orientation of AO, as revealed by dissipative dynamics simulations, highlighted the role of hydrophobic interactions during initial AO migration, influenced by varied alkyl chain lengths. Subsequent interface rearrangements arose from conservative force interactions between the AO's phenol hydroxyl ends and ZP. These findings inform effective interfacial engineering to optimize antioxidant efficiency, guiding practical applications in emulsion systems for improved oxidative stability.

Molecular Design for Vertical Phase Distribution Modulation in High-Performance Organic Solar Cells.

Component distribution within the photoactive layer dictates the morphology and electronic structure and substantially influences the performance of organic solar cells (OSCs). In this study, a molecular design strategy is introduced to manipulate component and energetics distribution by adjusting side-chain polarity. Two non-fullerene acceptors (NFAs), ITIC-16F and ITIC-E, are synthesized by introducing different polar functional substituents onto the side chains of ITIC. The alterations result in different distribution tendencies in the bulk heterojunction film: ITIC-16F with intensified hydrophobicity aligns predominantly with the top surface, while ITIC-E with strong hydrophilicity gravitates toward the bottom. This divergence directly impacts the vertical distribution of the excitation energy levels, thereby influencing the excitation kinetics over extended time periods and larger spatial ranges including enhanced diffusion-mediated exciton dissociation and stimulated charge carrier transport. Benefitting from the favorable energy distribution, the device incorporating ITIC-E into the PBQx-TF:eC9-2Cl blend showcases an impressive power conversion efficiency of 19.4%. This work highlights side-chain polarity manipulation as a promising strategy for designing efficient NFA molecules and underscores the pivotal role of spatial energetics distribution in OSC performance.

Sequentially Processed Bulk-Heterojunction-Buried Structure for Efficient Organic Solar Cells with 500 nm Thickness.

Large-area printing fabrication is a distinctive feature of organic solar cells (OSCs). However, the advance of upscalable fabrication is challenged by the thickness of organic active layers considering the importance of both exciton dissociation and charge collection. In this work, a bulk-heterojunction-buried (buried-BHJ) structure is introduced by sequential deposition to realize efficient exciton dissociation and charge collection, thereby contributing to efficient OSCs with 500 nm thick active layers. The buried-BHJ distributes donor and acceptor phases in the vertical direction as charge transport channels, while numerous BHJ interfaces are buried in each phase to facilitate exciton dissociation simultaneously. It is found that buried-BHJ configurations possess efficient exciton dissociation and rapid charge transport, resulting in reduced recombination losses. In comparison with traditional structures, the buried-BHJ structure displays a decent tolerance to film thickness. In particular, a power conversion efficiency of 16.0% is achieved with active layers at a thickness of 500 nm. To the best of the authors' knowledge, this represents the champion efficiency of thick film OSCs.

Thermally Evaporated Blue Quasi-Two-Dimensional Perovskite Light-Emitting Diodes via Low-Dimensional Phase Distribution Arrangement.

Perovskite light-emitting diodes (PeLEDs) have shown great potential in the display domain due to their wide color gamut, narrow emission, and low cost. In current PeLEDs manufacturing methods, thermal evaporation shows great competitiveness with its advantages of easy patterning, production line compatibility, and solvent-free processability. However, the development of thermally evaporated blue PeLEDs is limited by their low radiative recombination rate and high defect density. Herein, we report high-performance thermally evaporated blue PeLEDs by in situ introduction of ammonium cations. We confirm that phenethylammonium (PEA+) has lower adsorption energy, which significantly reduces the low-n phases in a quasi-2D perovskite film. The energy transfer rate is also promoted by the PEA+ addition. As a result, we fabricate blue PeLEDs with an external quantum efficiency of 1.56% by thermal evaporation. The strategy of arranging phase distribution could benefit the industrialization of full-color PeLEDs.

The impact of 180° return bend inclination on pressure drop characteristics and phase distribution during oil-water flow.

The present work aims to capture the influence of the inclination of the return bend on flow patterns and pressure drop during oil-water flow. The experiments were carried out for different inclinations (0°, 15°, 30°, and 45°) of return bend for various superficial velocity combinations of oil (kerosene) and water ranging from 0.07 to 0.66 m/s. The experiments showed that pressure drop increases with the increase in inclination. However, the pressure drop at a fixed inclination (say 15°) decreases with the increase in the superficial velocity of the water. Distinct flow patterns observed in the return bend were droplet flow, film inversion, slug flow, plug flow and large slug flow. Droplet flow dominates at the lower range of kerosene (i.e., Usk = 0.07-0.2 m/s) and higher range of water superficial velocity (i.e., Usw = 0.40-0.66 m/s) at all the inclinations considered in this study. Additionally, comparisons between the experimental and numerical simulation results were made. The numerical solution utilized the Euler-Euler approach, considering the different phases as interpenetrating continua. The Volume of Fluid (VOF) model was used within this approach, monitoring the volume fraction of each phase over the domain while calculating one set of momentum equations for each phase. To capture the turbulent effects accurately, the k-ε turbulence model was incorporated. It happened to be found that the numerical findings showed remarkable agreement with the experimental data.

Distribution and adsorption-desorption of organophosphate esters from land to sea in the sediments of the Beibu Gulf, South China Sea: Impact of seagoing river input.

Organophosphate esters (OPEs) have been a class of emerging environmental contaminants. However, studies on their environmental behavior, specifically their adsorption-desorption behavior between sediment and seawater in estuarine and coastal areas, remain limited. To address this gap, our study focused on investigating the levels and behavior of 11 OPEs in sediment samples collected from the Beibu Gulf, South China Sea, encompassing estuaries and coastal regions. The total concentrations of 11 OPEs (Σ11OPEs) in the sediments exhibit a significant decrease in summer, both in seagoing rivers (4.67 ± 2.74 ng/g dw) and the coastal zone (5.11 ± 3.71 ng/g dw), compared to winter levels in seagoing rivers (8.26 ± 4.70 ng/g dw) and the coastal zone (7.71 ± 3.83 ng/g dw). Chlorinated OPEs dominated the sediments, constituting 63 %-76 % of the total. Particularly, port and mariculture areas showed the highest levels of OPEs. Through load estimation analysis, it was revealed that the sedimentary OPEs in Qinzhou Bay (221 ± 128 kg) had the highest load, with input from the Qin River identified as a significant source. Chlorinated OPEs showed a trend of desorption from sediments to the water column with increasing salinity, emphasizing the crucial role of land-based OPEs input through suspended particulate matter in rivers as a pathway to the ocean. The impact of strong flow in estuarine environments was highlighted, as it can scour sediments, generate suspended sediments, and release OPEs into the water bodies. Additionally, the results of the ecological risk assessment indicated that most of the OPEs posed low-risk levels. However, attention is warranted for the contamination levels of some chlorinated OPEs, emphasizing the need for ongoing monitoring and assessment.

High-Performance Blue Perovskite Light-Emitting Diodes Enabled by Synergistic Effect of Additives.

While quasi-two-dimensional (quasi-2D) perovskites have good properties of cascade energy transfer, high exciton binding energy, and high quantum efficiency, which will benefit high-efficiency blue PeLEDs, inefficient domain distribution management and unbalanced carrier transport impede device performance improvement. Herein, (2-(9H-carbazol-9-yl)ethyl)phosphonic acid (2PACz) and methyl 2-aminopyridine-4-carboxylate (MAC) were simultaneously introduced to a blue quasi-2D perovskite film. Relying on the synergistic effect of 2PACz and MAC, it not only modulates the phase distribution inhibiting the n = 2 phase but also greatly improves the electrical property of the quasi-2D perovskite film. As a result, the as-modified blue quasi-2D PeLED demonstrated an external quantum efficiency (EQE) of 17.08% and a luminance of 10142 cd m-2. This study exemplifies the synergistic effect among dual additives and offers a new effective additive strategy modulating phase distribution and building balanced carrier transport, which paves the way for the fabrication of highly efficient blue PeLEDs.

Regulating Perovskite Crystallization through Interfacial Engineering Using a Zwitterionic Additive Potassium Sulfamate for Efficient Pure-Blue Light-Emitting Diodes.

Quasi-two-dimensional (quasi-2D) perovskites are emerging as efficient emitters in blue perovskite light-emitting diodes (PeLEDs), while the imbalanced crystallization of the halide-mixed system limits further improvements in device performance. The rapid crystallization caused by Cl doping produces massive defects at the interface, leading to aggravated non-radiative recombination. Meanwhile, unmanageable perovskite crystallization is prone to facilitate the formation of nonuniform low-dimensional phases, which results in energy loss during the exciton transfer process. Here, we propose a multifunctional interface engineering for nucleation and phase regulation by incorporating the zwitterionic additive potassium sulfamate into the hole transport layer. By using potassium ions (K+ ) as heterogeneous nucleation seeds, finely controlled growth of interfacial K+ -guided grains is achieved. The sulfamate ions can simultaneously regulate the phase distribution and passivate defects through coordination interactions with undercoordinated lead atoms. Consequently, such synergistic effect constructs quasi-2D blue perovskite films with smooth energy landscape and reduced trap states, leading to pure-blue PeLEDs with a maximum external quantum efficiency (EQE) of 17.32 %, spectrally stable emission at 478 nm and the prolonged operational lifetime. This work provides a unique guide to comprehensively regulate the halide-mixed blue perovskite crystallization by manipulating the characteristics of grain-growth substrate.

Regulating Phase Distribution of Dion-Jacobson Perovskite Colloidal Multiple Quantum Wells Toward Highly Stable Deep-Blue Emission.

Metal halide perovskite colloidal quantum wells (CQWs) hold great promise for modern photonics and optoelectronics. However, current studies focus on Ruddlesden-Popper (R-P) phase perovskite CQWs that contain bilayers of monovalent long-chain alkylamomoniums between the separated perovskite octahedra layers. The bilayers are packed back-to-back via weak van der Waals interaction, resulting in inferior charge carrier transport and easier decomposition of perovskite. This report first creates a new type of perovskite colloidal multiple QWs (CMQWs) in the form of Dion-Jacobson (D-J) structure by introducing an asymmetric diammonium cation. Furthermore, the phase distribution is optimized by the synergistic effect of valeric acid and zwitterionic lecithin, finally achieving pure deep-blue emission at 435 nm with narrow full width at half maximum. The diammonium layer in D-J perovskite CMQWs features extremely short width of only ≈0.6 nm, thereby contributing to more effective charge carrier transport and higher stability. Through the continuous photoluminescence (PL) measurement and corresponding theoretical calculation, the higher stability of D-J perovskite CMQWs than that of R-P structural CMQWs is confirmed. This work reveals the inherent superior stability of D-J structural CMQWs, which opens a new direction for fabricating stable perovskite optoelectronics.

Tailoring Phase Distribution of Quasi-2D Perovskites via Taurine-Assistance Enables Efficient Blue Light-Emitting Diodes.

Quasi-2D (Q-2D) perovskites with typical varied n-phase structures deserve promising candidates in pursuing high-performance perovskite light-emitting diodes (PeLEDs). Whereas their weakness in precise n-phase distribution control disables the optical property of PeLEDs since the n = 1 phase is dominated by severe nonradiative recombination. Here, an effective phase distribution tailoring strategy is developed for pure blue PeLEDs by introducing taurine (TAU) into mixed halide Q-2D perovskites. The sulfonic acid group in TAU can coordinate with Pb2+ to suppress the formation of the n = 1 phase while promoting the growth of Q-2D perovskites into domains with the graded distribution of n = 2 and 3. The amino group in TAU forms hydrogen bonds with electronegative halide ions, suppressing the formation of halide vacancies and reducing the defect density in the Q-2D perovskite films. As a result, optimized blue Q-2D perovskite films boosted PLQY to 92%. Target blue PeLED  was endowed with a peak EQE of 14.82% (average 12.6%) at 475 nm and a maximum luminance of 1937 cd m-2 , which is among the reported high-level pure blue PeLEDs. This work demonstrates a feasible approach to regulate the phase distribution of Q-2D perovskites for high-performance blue PeLEDs.

Comprehensive Crystal Regulation Reduces Interfacial Energy Loss for Efficient Blue Perovskite Light-Emitting Diodes.

As an essential component of future full-color displays, blue perovskite light-emitting diodes (PeLEDs) still lag far behind the red and green counterparts in the device performances. In the mainstream quasi-2D blue perovskite system, trap-mediated nonradiative loss, low energy transfer efficiency, and interface fluorescence quenching remain significant challenges. Herein, guanidinium thiocyanate (GASCN) and potassium cinnamate (PCA) are respectively introduced into the hole transport layer (HTL) and the perovskite precursor to achieve a dense and uniform perovskite thin film with greatly improved optoelectronic properties. Therefore, adequate GA+ acts as pre-nucleation sites on the HTL surface, regulating crystallization through strong hydrogen bonding with perovskite intermediates. The realized polydisperse domain distribution is conducive to cascade energy transfer, and the improved hole transport ability alleviates interface fluorescence quenching. In addition, the SCN- and CA- groups can form coordination bonds with the defects at the buried perovskite interface and grain boundaries, respectively, which effectively suppresses the detrimental nonradiative recombination. Benefitting from the comprehensive crystal regulation, blue PeLEDs featuring stable emission at 484 and 468 nm exhibit improved external quantum efficiencies of 11.5% and 4.3%, respectively.

The Synergistic Effect of Additives for Formamidinium-Based Inverted Dion-Jacobson 2D Perovskite Solar Cells with Enhanced Photovoltaic Performance.

Two-dimensional (2D) perovskite solar cells (PSCs) have attracted rapid growing attention due to their excellent environmental and operational stability. As an important type of 2D perovskite, Dion-Jacobson (DJ) 2D perovskites exhibit better structural integrity and more stable optoelectronic properties than those of Ruddlesden-Popper (RP) ones because of the elimination of weak van der Waals interactions. Random phase distribution, phase impurity, and weak crystallinity, however, can lead to severe nonradiative recombination losses in 2D perovskites and inferior device stability. Herein, formamidinium chloride (FACl) and lead chloride (PbCl2) are selected as additives to fabricate efficient and stable DJ 2D PSCs. The synergistic effect of additives could efficiently induce crystallization and suppress the low-n phase perovskites. The obtained 2D perovskites exhibit extended charge lifetime and enhanced charge transfer. The corresponding PSC device delivers an efficiency of 16.63% with a significantly improved open-circuit voltage (VOC) of 1.18 V and a fill factor (FF) of 81.65% than the control one. This PCE ranks the highest for inverted FA-based 2D DJ PSCs. Moreover, this device has exhibited exceptional long-term stability, which retains more than 95% of the initial efficiencies at about 50% relative humidity for 600 h.