RESUMEN
We theoretically identify the ScSeI monolayer as a promising new 2D material for photocatalysis through first-principles calculations. The most notable feature is the significant difference in carrier mobility, with electron mobility in the horizontal direction being 20.66 times higher than hole mobility, minimizing electron-hole recombination. The ScSeI monolayer exhibits a bandgap of 2.51 eV, with the valence band maximum at -6.37 eV and the conduction band minimum at -3.86 eV, meeting the requirements for water splitting. Phosphorus doping lowers the Gibbs free energy by 1.63 eV, enhancing the catalytic activity. The ScSeI monolayer achieves a hydrogen production efficiency of 17%, surpassing the commercial threshold of 10% and shows excellent mechanical, thermal, and dynamic stability, indicating feasibility for experimental synthesis and practical application. Additionally, the monolayer maintains its photocatalytic properties under tensile strain (-6% to 6%) and in aqueous environments, reinforcing its potential as an effective photocatalyst. Based on these findings, we believe the ScSeI monolayer is a highly promising photocatalyst.
RESUMEN
It is still a challenge to construct single-atom level reduction and oxidation sites in single-component photocatalyst by manipulating coordination configuration for photocatalytic water splitting. Herein, the atomically dispersed asymmetric configuration of six-coordinated Co-S2O4 (two exposed S atoms, two OH groups, and two CoâOâZn bonds) suspending on ZnIn2S4 nanosheets verified by combining experimental analysis with theoretical calculation, is applied into photocatalytic water splitting. The Co-S2O4 site immobilized by Vs acts as oxidation sites to guide electrons transferring to neighboring independent S atom, achieving efficient separation of reduction and oxidation sites. It is worth mentioning that stabilized Co-S2O4 configuration show dynamic structure evolution to highly active Co-S1O4 configuration (one exposed S atom, one OH group, and three CoâOâZn bonds) in reaction, which lowers energy barrier of transition state for H2O activization. Ultimately, the optimized photocatalyst exhibits excellent photocatalytic activity for water splitting (H2: 80.13 µmol g-1 h-1, O2: 37.81 µmol g-1 h-1) and outstanding stability than that of multicomponent photocatalysts due to dynamic and reversible evolution between stable Co-S2O4 configuration and active Co-S1O4 configuration. This work demonstrates new cognitions on immobilized strategy through vacancy inducing, manipulating coordination configuration, and dynamic evolution mechanism of single-atom level catalytic site in photocatalytic water splitting.
RESUMEN
With the development of miniaturized devices, there is an increasing demand for 2D multifunctional materials. Six ferroelastic semiconductors, Y2Se2XX' (X, X' = I, Br, Cl, or F; X ≠ X') monolayers, are theoretically predicted here. Their in-plane anisotropic band structure, elastic and piezoelectric properties can be switched by ferroelastic strain. Moderate energy barriers can prevent the undesired ferroelastic switching that minor interferences produce. These monolayers exhibit high carrier mobilities (up to 104 cm2 V-1 s-1) with strong in-plane anisotropy. Furthermore, their wide bandgaps and high potential differences make them broad-pH-value and high-performance photocatalysts at pH value of 0-14. Strikingly, Y2Se2BrF possesses outstanding d33 (d33 = -405.97 pm/V), greatly outperforming CuInP2S6 by 4.26 times. Overall, the nano Y2Se2BrF is a hopeful candidate for multifunctional devices to generate a direct current and achieve solar-free photocatalysis. This work provides a new paradigm for the design of multifunctional energy materials.
RESUMEN
The band gap constraint of the photocatalyst for overall water splitting limits the utilization of solar energy. A strategy to broaden the range of light absorption is employing a two-dimensional (2D) polar material as photocatalyst, benefiting from the deflection of the energy level due to their intrinsic internal electric field. Here, by using first-principles computational screening, we search for 2D polar semiconductors for photocatalytic water splitting from both ground- and excited-state perspectives. Applying a unique electronic structure model of polar materials, there are 13 photocatalyst candidates for the hydrogen evolution reaction (HER) and 8 candidates for the oxygen evolution reaction (OER) without barrier energies from the perspective of the ground-state free energy variation calculation. In particular, Cu2As4Cl2S3 and Cu2As4Br2S3 can catalyze HER and OER simultaneously, becoming promising photocatalysts for overall water splitting. Furthermore, by combining ground-state band structure calculations with excited-state charge distribution and transfer calculated by linear-response time-dependent density functional theory (LR-TDDFT) and time-dependent ab initio nonadiabatic molecular dynamics (NAMD), respectively, the rationality of the 2D polar material model has been manifested. The intrinsic built-in electric field promotes the separation of charge carriers while suppressing their recombination. Therefore, our computational work provides a high-throughput method to design high-performance photocatalysts for water splitting.
RESUMEN
The solar-driven overall water splitting (2H2Oâ2H2 + O2) is considered as one of the most promising strategies for reducing carbon emissions and meeting energy demands. However, due to the sluggish performance and high H2 cost, there is still a big gap for the current photocatalytic systems to meet the requirements for practical sustainable H2 production. Economic feasibility can be attained through simultaneously generating products of greater value than O2, such as hydrogen peroxide (H2O2, 2H2OâH2 + H2O2). Compared with overall water splitting, this approach is more kinetically feasible and generates more high-value products of H2 and H2O2. In several years, there has been an increasing surge in exploring the possibility and substantial progress has been achieved. In this review, a concise overview of the importance and underlying principles of PIWS is first provided. Next, the reported typical photocatalysts for PIWS are discussed, including commonly used semiconductors and cocatalysts, essential design features of these photocatalysts, and connections between their structures and activities, as well as the selected approaches for enhancing their stability. Then, the techniques used to quantify H2O2 and the operando characterization techniques that can be employed to gain a thorough understanding of the reaction mechanisms are summarized. Finally, the current existing challenges and the direction needing improvement are presented. This review aims to provide a thorough summary of the most recent research developments in PIWS and sets the stage for future advancements and discoveries in this emerging area.
RESUMEN
Heterostructure catalysts are highly anticipated in the field of photocatalytic water splitting. AlN/Sc2CF2 and GaN/Sc2CF2 heterostructures are proposed in this work, and the electronic structures were revealed with the first-principles method to explore their photocatalytic properties for water splitting. The results found that the thermodynamically stable AlN/Sc2CF2 and GaN/Sc2CF2 heterostructures are indirect semiconductors with reduced band gaps of 1.75 eV and 1.84 eV, respectively. These two heterostructures have been confirmed to have type-â band alignments, with both VBM and CBM contributed to by the Sc2CF2 layer. AlN/Sc2CF2 and GaN/Sc2CF2 heterostructures exhibit the potential for photocatalytic water splitting as their VBM and CBM stride over the redox potential of water. Gibbs free energy changes in HER occurring on AlN/Sc2CF2 and GaN/Sc2CF2 heterostructures are as low as -0.31 eV and -0.59 eV, respectively. The Gibbs free energy change in HER on the AlN (GaN) layer is much lower than that on the Sc2CF2 surface, owing to the stronger adsorption of H on AlN (GaN). The AlN/Sc2CF2 and GaN/Sc2CF2 heterostructures possess significant improvements in absorption range and intensity compared to monolayered AlN, GaN, and Sc2CF2. In addition, the band gaps, edge positions, and absorption properties of AlN/Sc2CF2 and GaN/Sc2CF2 heterostructures can be effectively tuned with strains. All the results indicate that AlN/Sc2CF2 and GaN/Sc2CF2 heterostructures are suitable catalysts for photocatalytic water splitting.
RESUMEN
Monolayer molybdenum disulfide (MoS2) with a suitable direct band gap and strong optical absorption is very attractive for utilization in solar cells and photocatalytic water splitting. Nevertheless, the broader utilization of MoS2 is impeded by its low carrier mobility and limited responsiveness to infrared light. To overcome these challenges, we constructed a variety of stackings for the boron phosphide (BP)/MoS2 van der Waals heterostructure (vdWH), all of which display S-scheme band alignments except for the AC' stacking. The constituent BP monolayer has superior carrier mobility and strong infrared and visible light response, which makes up for the shortcomings of MoS2. The study revealed that the AB stacking exhibits a remarkable power conversion efficiency of 22.27%, indicating its significant application prospect in solar cells. Additionally, the AB stacking also exhibits a promising application prospect in photocatalytic water splitting due to its suitable band structure, S-scheme band alignment, strong optical adsorption characteristic, high solar-to-hydrogen efficiency, and robust built-in electric field. Meanwhile, applying uniaxial tensile strains along the x-axis direction is more beneficial for photocatalytic water splitting. Hence, the AB-stacked BP/MoS2 vdWH shows significant potential for use in both solar cells and photocatalytic water splitting. This work paves the way for exploring the application of S-scheme heterostructures in solar energy conversion systems.
RESUMEN
Using hybrid density functional theory calculations, we systematically study the biaxial strain and electric field modulated electronic properties of g-ZnO/SnS2, g-ZnO/SnSe2, and g-ZnO/SnSSe S-scheme van der Waals heterostructures (vdWHs). g-ZnO/SnS2 and g-ZnO/SnSSe are found to be promising photocatalysts for water splitting with high solar-to-hydrogen efficiencies, even under acidic, alkaline, and high-stress conditions. The strain effect on the bandgaps of g-ZnO/SnXY is explained in detail according to the correlation between geometry structure and orbital hybridization of SnXY, which could help understand the strain-induced band structure evolutions in other SnXY (X, Y = S, Se)-based vdWHs. It is surprising that under an external electric field, g-ZnO/SnS2, g-ZnO/SnSe2, and g-ZnO/SnSSe can offer the occupied nearly free-electron (NFE) states. In many materials, NFE states are usually unoccupied and is not conducive to the charge transport. The NFE state in g-ZnO/SnSe2 is the most sensitive to the electric field and might be promising electron transport channel in nanoelectronic devices. g-ZnO/SnSe2 might also have application potential in gas sensors and high-temperature superconductors.
RESUMEN
A hierarchical sea urchin-like hybrid metal oxide nanostructure of ZnO nanorods deposited on TiO2porous hollow hemispheres with a thin zinc titanate interface layer is specifically designed and synthesized to form a combined type I straddling and type II staggered junctions. The HHSs, synthesized by electrospinning, facilitate light trapping and scattering. The ZnO nanorods offer a large surface area for improved surface oxidation kinetics. The interface layer of zinc titanate (ZnTiO3) between the TiO2HHSs and ZnO nanorods regulates the charge separation in a closely coupled hierarchy structure of ZnO/ZnTiO3/TiO2. The synergistic effects of the improved light trapping, charge separation, and fast surface reaction kinetics result in a superior photoconversion efficiency of 1.07% for the photoelectrochemical water splitting with an outstanding photocurrent density of 2.8 mA cm-2at 1.23 V versus RHE.
RESUMEN
Organic supramolecular photocatalysts have garnered widespread attention due to their adjustable structure and exceptional photocatalytic activity. Herein, a novel bis-dicarboxyphenyl-substituent naphthalenediimide self-assembly supramolecular photocatalyst (SA-NDI-BCOOH) with efficient dual-functional photocatalytic performance is successfully constructed. The large molecular dipole moment and short-range ordered stacking structure of SA-NDI-BCOOH synergistically create a giant internal electric field (IEF), resulting in a remarkable 6.7-fold increase in its charge separation efficiency. Additionally, the tetracarboxylic structure of SA-NDI-BCOOH greatly enhances its hydrophilicity. Thus, SA-NDI-BCOOH demonstrates efficient dual-functional activity for photocatalytic hydrogen and oxygen evolution, with rates of 372.8 and 3.8 µmol h-1, respectively. Meanwhile, a notable apparent quantum efficiency of 10.86% at 400 nm for hydrogen evolution is achieved, prominently surpassing many reported supramolecular photocatalysts. More importantly, with the help of dual co-catalysts, it exhibits photocatalytic overall water splitting activity with H2 and O2 evolution rates of 3.2 and 1.6 µmol h-1. Briefly, this work sheds light on enhancing the IEF by controlling the molecular polarity and stacking structure to dramatically improve the photocatalytic performance of supramolecular materials.
RESUMEN
Despite having favorable energetics and tunable optoelectronic properties, utilization of BaTiO3 (BTO) for photocatalytic reactions is limited by its absorption only in the ultraviolet region. To address this challenge, BTO is doped with iridium (Ir) to induce visible light absorption. The visible light-induced photocatalytic H2 generation efficiency is enhanced by 2 orders of magnitude on selective conversion of the Ir valence state from Ir4+ to Ir3+. To understand such intriguing behavior, valence state-dependent changes in the optoelectronic, structural, and surface properties and electronic band structure are comprehensively investigated. The effect of electron occupancy change between Ir4+ (t2g5 eg0) and Ir3+ (t2g6 eg0) and their energetic positions within the band gap is found to significantly influence H2 generation. Besides this, converting Ir4+ to Ir3+ enhanced the photocathodic current and lowered the onset potential. Results aid in designing photocatalysts to efficiently use low-energy photons for enhancing solar H2 production in these emerging BTO-based photocatalysts. Collectively, the observations made in this work highlight the promising application of Ir3+:BTO in z-scheme photocatalysis.
RESUMEN
The bandgap of most known two-dimensional materials can be tuned by hydrogenation, although certain 2D materials lack a sufficient wide bandgap. Currently, it would be perfect to design non-toxic, low-cost, and high-performance photocatalysts for photocatalytic water splitting via hydrogenation. We systematically examine the impact of hydrogenation on the optical and electronic characteristics of GeC/g-C3N4 vdW heterostructures (vdWHs) with four different stacking patterns using first-principles calculations. The phonon spectra, interlayer distance, binding energies and ab initio molecular dynamics calculations show the kinetic, mechanical, and thermal stability of GeC/g-C3N4 vdWH after hydrogenation at 300, 500 and 800â K and possesses anisotropic Poisson's ratio, Young's and bulk modulus, suggesting that it's a promising candidate for experimental fabrication. According to an investigation of its electronic properties, GeC/g-C3N4 vdWH has a bandgap of 1.28â eV, but hydrogenation dramatically increases it to 2.47â eV. As a result of interface-induced electronic doping, the electronic states in g-C3N4 might be significantly adjusted by coming into contact with hydrogenated GeC sheets. The vdWH exhibits a type-II semiconductor, which can enhance the spatial separation of electron-hole pairs and has a strong red-shift of absorption coefficient than those of the constituent monolayers. The high potential drop caused by the significant valence and conduction band offsets effectively separated the charge carriers. The absorption coefficient of GeCH2/g-C3N4 vdWH is highly influenced by a biaxial compressive strain more than the biaxial tensile strain. Our theoretical research implies that the hydrogenated GeCH2/g-C3N4 vdWH possesses tunable optical and electronic behaviour for use as a hole-transport material in solar energy harvesting, nanoelectronic and optoelectronic devices.
RESUMEN
The use of 2D materials to produce hydrogen (H2 ) fuel via photocatalytic water splitting has been intensively studied. However, the simultaneous fulfillment of the three essential requirements-high photon utilization, rapid carrier transfer, and low-barrier redox reactions-for wide-pH-range production of H2 still poses a significant challenge with no additional modulation. By employing the first-principles calculations, it has been observed that the Janus ZnXY2 structures (X = Si/Ge/Sn, Y = S/Se/Te) exhibit significantly enhanced built-in electric fields (0.20-0.36 eV Å-1 ), which address the limitations intrinsically. Compared to conventional Janus membranes, the ductile ZnSnSe2 and ZnSnTe2 monolayers have stronger regulation of electric fields, resulting in improved electron mobility and excitonic nature (Ebinding = 0.50/0.35 eV). Both monolayers exhibit lower energy barriers of hydrogen evolution reaction (HER, 0.98/0.86 eV, pH = 7) and resistance to photocorrosion across pH 0-7. Furthermore, the 1% tensile strain can further boost visible light utilization and intermediate absorption. The optimal AC-type bilayer stacking configuration is conducive to enhancing electric fields for photocatalysis. Overall, Janus ZnXY2 membranes overcome the major challenges faced by conventional 2D photocatalysts via intrinsic polarization and external amelioration, enabling efficient and controllable photocatalysis without the need for doping or heterojunctions.
RESUMEN
CuAl layered double hydroxide (LDH) and polymeric carbon nitride (g-C3N4, GCNN) were assembled to construct a set of novel 2D/2D CuAl-LDH/GCNN heterostructures. These materials were tested towards H2 and O2 generation from water splitting using visible-light irradiation. Compared to pristine materials, the heterostructures displayed strongly enhanced visible-light H2 evolution, dependent on the LDH content, which acts as a cocatalyst, replacing the benchmark Pt. The optimal LDH loading was achieved for 0.2CuAl-LDH/GCNN that exhibited an increased number of active sites and showed a trade-off between charge separation efficiency and light shading, resulting in a 32-fold increase in the amount of evolved H2 compared with GCNN. In addition, the 0.2CuAl-LDH/GCNN heterostructure generated 1.5 times more O2 than GCNN. The higher photocatalytic performance was due to efficient charge carriers' separation at the heterojunction interface via an S-scheme (corroborated by work function, steady-state and time-resolved photoluminescence studies), enhanced utilisation of longer-wavelength photons (>460 nm) and higher surface area available for the catalytic reactions.
RESUMEN
A two-dimensional (2D) polar monolayer with a polarization electric field can be used as a potential photocatalyst. In this work, first principle calculations were used to investigate the stability and photocatalytic properties of 2D polar monolayer SiTe as a potential promising catalyst in water-splitting. Our results show that the 2D polar monolayer SiTe possesses an indirect band gap of 2.41 eV, a polarization electric field from the (001) surface to the (001¯) surface, a wide absorption region, and a suitable band alignment for photocatalytic water-splitting. We also discovered that the photocatalytic activity of 2D polar monolayer SiTe could be effectively tuned through strain engineering. Additionally, strain engineering, particularly compressive strain in the range from -1% to -3%, can enhance the photocatalytic activity of 2D polar monolayer SiTe. Overall, our findings suggest that 2D polar monolayer SiTe has the potential to be a promising catalyst for photocatalytic water-splitting using visible light.
RESUMEN
Regulating electronic structures of the active site by manipulating the local coordination is one of the advantageous means to improve photocatalytic hydrogen evolution (PHE) kinetics. Herein, the ZnIn2 S4 /Mo2 TiC2 Schottky junctions are designed to be constructed through the interfacial local coordination of In3+ with the electronegative O terminal group on Mo2 TiC2 based on the different work functions. Kelvin probe force microscopy and charge density difference reveal that an electronic unidirectional transport channel across the Schottky interface from ZnIn2 S4 to Mo2 TiC2 is established by the formed local nucleophilic/electrophilic region. The increased local electron density of Mo2 TiC2 inhibits the backflow of electrons, boosts the charge transfer and separation, and optimizes the hydrogen adsorption energy. Therefore, the ZnIn2 S4 /Mo2 TiC2 photocatalyst exhibits a superior PHE rate of 3.12 mmol g-1 h-1 under visible light, reaching 3.03 times that of the pristine ZnIn2 S4 . This work provides some insights and inspiration for preparing MXene-based Schottky catalysts to accelerate PHE kinetics.
RESUMEN
Chromium oxide (Cr2O3) is a beneficial metal oxide used to prevent the backward reaction in photocatalytic water splitting. The present work investigates the stability, oxidation state, and the bulk and surface electronic structure of Cr-oxide photodeposited onto P25, BaLa4Ti4O15, and Al:SrTiO3 particles as a function of the annealing process. The oxidation state of the Cr-oxide layer as deposited is found to be Cr2O3 on the surface of P25 and Al:SrTiO3 particles and Cr(OH)3 on BaLa4Ti4O15. After annealing at 600 °C, for P25 (a mixture of rutile and anatase TiO2), the Cr2O3 layer diffuses into the anatase phase but remains at the surface of the rutile phase. For BaLa4Ti4O15, Cr(OH)3 converts to Cr2O3 upon annealing and diffuses slightly into the particles. However, for Al:SrTiO3, the Cr2O3 remains stable at the surface of the particles. The diffusion here is due to the strong metal-support interaction effect. In addition, some of the Cr2O3 on the P25, BaLa4Ti4O15, and Al:SrTiO3 particles is reduced to metallic Cr after annealing. The effect of Cr2O3 formation and diffusion into the bulk on the surface and bulk band gaps is investigated with electronic spectroscopy, electron diffraction, DRS, and high-resolution imaging. The implications of the stability and diffusion of Cr2O3 for photocatalytic water splitting are discussed.
RESUMEN
Post-coordination design on covalent organic frameworks (COFs) is an efficient strategy for elevating the photocatalytic activity of organic moiety. However, the rigid skeletons and densely layered stacking of two-dimensional (2D) COFs cannot be flexibly adapted for specific conformations of metal complexes, thereby impairing the metal-COF cooperation. Here, we adopt a solvothermal method to immobilize nickel(II) ions into a 2,2'-bipyridine-containing 2D COF, forming a stable coordination motif. Such the complex remarkably enhances the photocatalytic performance, giving an optimized H2 evolution rate of as high as 51 300â µmol h-1 g-1 , 2.5â times higher than the pristine COF. The evolved hydrogen gas can also be detected upon 700-nm light irradiation, while its analog synthesized by the traditional coordination method is photo-catalytically inert. This work provides a strategy for optimizing the metal-COF coordination system and strengthening a synergy for electronic regulation in photocatalysis.
RESUMEN
Construction of Z-scheme photocatalyst is an effective approach for using solar energy to produce hydrogen during water splitting. Herein, 2D/2D WO3 /g-C3 N4 heterojunction photocatalyst was synthesized by a convenient and green method including exfoliation and heterojunction procedures, in the reverse microemulsion system via supercritical carbon dioxide (scCO2 ). The resultant W/CN-10.3 composite exhibited enhanced photocatalytic activities towards the hydrogen evolution during water splitting with a hydrogen evolution rate of 688.51â µmol g-1 h-1 , which was more than 16â times higher than bulk g-C3 N4 with the same loading amount of Pt as cocatalyst. Due to its effective separation of photogenerated carriers and prolonged lifetime, more photoexcited electrons with high reduction ability could contribute to the production of H2 . Possible formation mechanism of 2D-2D WO3 /g-C3 N4 nanosheets via scCO2 in the reverse microemulsion system by the one-pot method has been proposed. This work provides an efficient and green strategy to synthesize 2D-2D heterojunction for the utilization in solar-to-fuel conversion.
Asunto(s)
Dióxido de Carbono , Energía Solar , Electrones , Hidrógeno , AguaRESUMEN
The relatively short-lived excited states, such as the nascent electron-hole pairs (excitons) and the shallow trapping states, in semiconductor-based photocatalysts produce an exceptionally high charge carrier recombination rate, dominating a low solar-to-fuel performance. Here, a π-conjugated in-plane heterostructure between graphitic carbon nitride (g-CN) and carbon rings (Crings ) (labeling g-CN/Crings ) is effectively synthesized from the thermolysis of melamine-citric acid aggregates via a microwave-assisted heating process. The g-CN/Crings in-plane heterostructure shows remarkably suppressed excited-state decay and increased charge carrier population in photocatalysis. Kinetics analysis from the femtosecond time-resolved transient absorption spectroscopy illustrates that the g-CN/Crings π-conjugated heterostructure produces slower exciton annihilation (τ1 = 7.9 ps) and longer shallow electron trapping (τ2 = 407.1 ps) than pristine g-CN (τ1 = 3.6 ps, τ2 = 264.1 ps) owing to Crings incorporation, both of which enable more photoinduced electrons to participate in the photocatalytic reactions, thereby realizing photoactivity enhancement. As a result, the photocatalytic activity exhibits an eightfold enhancement in visible-light-driven H2 generation. This work provides a viable route of constructing π-conjugated in-plane heterostructures to suppress the excited-state decay and improve the photocatalytic performance.