RESUMEN
Two key challenges in the multidisciplinary field of sequence-controlled polymers are their efficient synthesis and the establishment of correlation with polymer properties. In this context, in this paper, gradient architecture in the hydrophobic tail of an amphiphile is implemented and synthesized for a fixed hydrophilic unit (polyethylene glycol, PEG), by means of two monomers (2-hydroxypropyl methacrylate, HPMA, and diacetone acrylamide, DAAM) of contrasting reactivities. The resulting non-biochemical gradient sequence-controlled polymers are generated from a one-pot, homogeneous mixture through a PET-RAFT-PISA (photoinduced electron/energy transfer-reversible addition-fragmentation chain transfer-polymerization-induced self-assembly) method. In addition, the initial concentration ratio of the monomers in the gradient is varied as an input for a set of fixed experimental parameters and conditions, and its correlation with kinetics, gradient and self-assembled morphologies is established, as the output of the process. These results are extensively corroborated via nuclear magnetic resonance (NMR) spectroscopy analysis, together with transmission electron microscopy (TEM) images, dynamic light scattering (DLS), and gel permeation chromatography (GPC) experiments. These results have implications for chemical computation carried out by PISA, programmable self-assembly, information storage, biomimetics, origins of life and synthetic protocell studies.
RESUMEN
Aqueous emulsion polymerization is a robust technique for preparing nanoparticles of block copolymers; however, it typically yields spherical nanoassemblies. The scale preparation of nanoassemblies with nonspherical high-order morphologies is a challenge, particularly 2D core-shell nanosheets. In this study, the polymerization-induced self-assembly (PISA) and crystallization-driven self-assembly (CDSA) are combined to demonstrate the preparation of 2D nanosheets and their aggregates via aqueous reversible addition-fragmentation chain transfer (RAFT) emulsion polymerization. First, the crucial crystallizable component for CDSA, hydroxyethyl methacrylate polycaprolactone (HPCL) macromonomer is synthesized by ring opening polymerization (ROP). Subsequently, the RAFT emulsion polymerization of HPCL is conducted to generate crystallizable nanomicelles by a grafting-through approach. This PISA process simultaneously prepared spherical latices and bottlebrush block copolymers comprising poly(N',N'-dimethylacrylamide)-block-poly(hydroxyethyl methacrylate polycaprolactone) (PDMA-b-PHPCL). The latexes are now served as seeds for inducing the formation of 2D hexagonal nanosheets, bundle-shaped and flower-like aggregation via the CDSA of PHPCL segments and unreacted HPCL during cooling. Electron microscope analysis trace the morphology evolution of these 2D nanoparticles and reveal that an appropriate crystallized component of PHPCL blocks play a pivotal role in forming a hierarchical structure. This work demonstrates significant potential for large-scale production of 2D nanoassemblies through RAFT emulsion polymerization.
RESUMEN
Efficient occlusion of particulate additives into a single crystal has garnered an ever-increasing attention in materials science because it offers a counter-intuitive yet powerful platform to make crystalline nanocomposite materials with emerging properties. However, precisely controlling the spatial distribution of the guest additives within a host crystal remains highly challenging. We herein demonstrate a unique, straightforward method to engineer the spatial distribution of copolymer nanoparticles within calcite (CaCO3) single crystals by judiciously adjusting initial [Ca2+] concentration used for the calcite precipitation. More specifically, polymerization-induced self-assembly is employed to synthesize well-defined and highly anionic poly(3-sulfopropyl methacrylate potassium)41-block-poly(benzyl methacrylate)500 [PSPMA41-PBzMA500] diblock copolymer nanoparticles, which are subsequently used as model additives during the growth of calcite crystals. Impressively, such guest nanoparticles are preferentially occluded into specific regions of calcite depending on the initial [Ca2+] concentration. These unprecedented phenomena are most probably caused by dynamic change in electrostatic interaction between Ca2+ ions and PSPMA41 chains based on systematic investigations. This study not only showcases a significant advancement in controlling the spatial distribution of guest nanoparticles within host crystals, enabling the internal structure of composite crystals to be rationally tailored via a spatioselective occlusion strategy, but also provides new insights into biomineralization.
RESUMEN
Stimuli-responsive block copolymer nanoparticles (NPs) have received close attention in recent years owing to their tremendous application potential in smart materials. Azobenzene-containing NPs are widely studied due to the advantages of light as a stimulus and fast reversible trans-cis isomerization of azobenzene chromophores. However, the inefficient preparation process and difficult reversible transformation of morphologies limit their development. Herein it is demonstrated that the light-triggered reversible swelling behavior of wormlike NPs with high azobenzene content could be realized via confined deformation. These worms are prepared in large quantities via polymerization-induced self-assembly based on the copolymerization of 11-(4-(4-butylphenylazo)phenoxy)undecyl methacrylate (MAAz) and N-(methacryloxy)succinimide (NMAS) monomers. Upon UV/visible light irradiation, the reversible deformation of worms is achieved when the feed molar ratio of NMAS/MAAz is relatively high or via crosslinking using diamines, which leads to the reduction of the photoisomerization efficiency. The diameter variation of the worms is influenced by the amount and types of crosslinkers. Moreover, the scalability of this strategy is further proved by the fabrication of photo- and reductant-responsive crosslinked worms. It is expected that this study not only provides a new route to affording reversible photoresponsive NPs but also offers a unique insight into the reversible photodeformation mechanism of azobenzene-containing NPs.
RESUMEN
Reversible addition-fragmentation chain transfer (RAFT) emulsion polymerization of methyl methacrylate (MMA) is successfully performed in water in the presence of a poly(methacrylic acid) (PMAA) macromolecular chain transfer agent (macroCTA) leading to the formation of self-stabilized PMAA-b-PMMA amphiphilic block copolymer particles. At pH 3.7, the reactions are well-controlled with narrow molar mass distributions. Increasing the initial pH, particularly above 5.6, results in a partial loss of reactivity of the PMAA macroCTA. The effect of the degree of polymerization (DPn) of the PMMA block, the solids content, the nature of the hydrophobic segment, and the pH on the morphology of the obtained diblock copolymer particles is then investigated. Worm-like micelles are formed for a DPn of PMMA of 20 (PMMA20), while "onion-like" particles and spherical vesicles are obtained for PMMA30 and PMMA50, respectively. In contrast, spherical particles are obtained for the DPns higher than 150. This unusual evolution of particle morphologies upon increasing the DPn of the PMMA block seems to be related to hydrogen bonds between hydrophilic MAA and hydrophobic MMA units.
Asunto(s)
Emulsiones , Metilmetacrilato , Polimerizacion , Ácidos Polimetacrílicos , Emulsiones/química , Ácidos Polimetacrílicos/química , Ácidos Polimetacrílicos/síntesis química , Metilmetacrilato/química , Sustancias Macromoleculares/química , Sustancias Macromoleculares/síntesis química , Interacciones Hidrofóbicas e Hidrofílicas , Polimetil Metacrilato/química , Concentración de Iones de Hidrógeno , Tamaño de la Partícula , Estructura Molecular , MicelasRESUMEN
Nano-assemblies have wide applications in biomedicine, functional coatings, Pickering emulsifiers, hydrogels, and so forth. The preparation of assemblies mainly utilizes the polymerization-induced self-assembly (PISA) method, which can produce high-concentration nanoscale assemblies in one step. However, the initiation processes of most reported PISA are limited to thermal initiation. Here, we reported two green and efficient methods for synthesizing nano-assemblies with various morphologies using ultrasound (20 kHz)/ microwave (500 W) assisted aqueous-phase RAFT-PISA in 3 h and 1 h. Cyclodextrin (CD) and styrene (St) nucleating monomer were complexed in a 1:1 ratio. Then, using Poly (ethylene glycol) methyl ether as the macromolecular reversible addition-fragmentation chain transfer (RAFT) agent (PEG-CTA) to control the CD/St complexes, the conversion rate of St monomer was respectively 27 %-60 %, 20 %-30 % within 3 h and 1 h under ultrasonics/microwave assisted PISA. Results showed that the morphologies of the assemblies are not only related to the length of PS block, but also to the assistance types and the remaining monomer concentration. The results showed that only PEG45-b-PS90 and PEG45-b-PS241 assemblies prepared by ultrasonics assisted PISA form evolved lamellaes and vesicles (100 nm), which break through the limitation of kinetic freezing. But the ultrasonic reaction on morphology of assemblies is not all favourable. For one thing, it can promote the movement of particles; for another, it makes reverse morphology transformation and sphere is preferred morphology. Therefore, the main reason of morphology evolution is the remaining monomer concentration of PEG45-b-PS90 and PEG45-b-PS241 assemblies reaches to 55 %-65 %, which promoting the segment movement. The results showed that the morphology of the assemblies prepared by microwave assisted PISA changed from spherical micelles to short rods, and finally to vesicles (120-140 nm) as the length of hydrophobic PS block increases. The kinetic freezing problem was solved in microwave-assisted PISA due to the action of microwaves and more remaining monomer concentration. Both them can boost particles movement.
RESUMEN
Polymerization-induced self-assembly (PISA) is a powerful and versatile technique for producing colloidal dispersions of block copolymer particles with desired morphologies. Currently, PISA can be carried out in various media, over a wide range of temperatures, and using different mechanisms. This method enables the production of biodegradable objects and particles with various functionalities and stimuli sensitivity. Consequently, PISA offers a broad spectrum of potential commercial applications. The aim of this review is to provide an overview of the current state of rational synthesis of block copolymer particles with diverse morphologies using various PISA techniques and mechanisms. The discussion begins with an examination of the main thermodynamic, kinetic, and structural aspects of block copolymer micellization, followed by an exploration of the key principles of PISA in the formation of gradient and block copolymers. The review also delves into the main mechanisms of PISA implementation and the principles governing particle morphology. Finally, the potential future developments in PISA are considered.
RESUMEN
N-carboxyanhydride ring-opening polymerization-induced self-assembly (NCA ROPISA) offers a convenient route for generating poly(amino acid)-based nanoparticles in a single step, crucially avoiding the need for post-polymerization self-assembly. Most examples of NCA ROPISA make use of a poly(ethylene glycol) (PEG) hydrophilic stabilizing block, however this non-biodegradable, oil-derived polymer may cause an immunological response in some individuals. Alternative water-soluble polymers are therefore highly sought. This work reports the synthesis of wholly poly(amino acid)-based nanoparticles, through the chain-extension of a polysarcosine macroinitiator with L-Phenylalanine-NCA (L-Phe-NCA) and Alanine-NCA (Ala-NCA), via aqueous NCA ROPISA. The resulting polymeric structures comprise of predominantly anisotropic, rod-like nanoparticles, with morphologies primarily influenced by the secondary structure of the hydrophobic poly(amino acid) that enables their formation.
Asunto(s)
Nanopartículas , Polimerizacion , Sarcosina , Nanopartículas/química , Sarcosina/química , Sarcosina/análogos & derivados , Estructura Molecular , Interacciones Hidrofóbicas e Hidrofílicas , Polímeros/química , Polímeros/síntesis química , Tamaño de la Partícula , Polietilenglicoles/química , PéptidosRESUMEN
Assemblies are widely used in biomedicine, batteries, functional coatings, Pickering emulsifiers, hydrogels, and luminescent materials. Polymerization-induced self-assembly (PISA) is a method for efficiently preparing particles, mainly initiated thermally. However, thermally initiated PISA usually requires a significant amount of time and energy. Here, we demonstrate the preparation of nano-assemblies with controllable morphologies and size using ultrasound (20 kHz) assisted ethanol-phase RAFT-PISA in three hours. Using poly (N, N-dimethylaminoethyl methacrylate) as the macromolecular reversible addition-fragmentation chain transfer agent (PDMA-CTA) to control the nucleating monomer benzyl methacrylate (BzMA), we obtained nano-assemblies with different morphologies. With the length of hydrophobic PBzMA block growth, the morphologies of the assemblies at 15 wt% solid content changed from spheres to vesicles, and finally to lamellae; the morphologies of the assemblies at 30 wt% changed from spheres micelles to short worms, then vesicles, and finally to large compound vesicles. With the same targeted degree of polymerization, nano-assemblies having a 30 wt% solid content display a more evolved morphology. The input of ultrasonic energy makes the system have higher surface free energy, results the mass fraction interval of solventphilic blocks (fhydrophilic) corresponding to the formation of spherical micelles is expanded from fhydrophilic > 45 % to fhydrophilic > 31 % under ultrasound and the fhydrophilic required to form worms, vesicles, and large composite vesicles decreases in turn. It is worth noting that the fhydrophilic interval of worms prepared by ultrasonics assisted PISA gets larger. Overall, the highly green, externally-regulatable and fast method of ultrasonics assisted PISA can be extended to vastly different diblock copolymers, for a wide range of applications.
RESUMEN
Theranostics is a novel paradigm integrating therapy and diagnostics, thereby providing new prospects for overcoming the limitations of traditional treatments. In this context, perfluorocarbons (PFCs) are the most widely used tracers in preclinical fluorine-19 magnetic resonance (19F MR), primarily for their high fluorine content. However, PFCs are extremely hydrophobic, and their solutions often display reduced biocompatibility, relative instability, and subpar 19F MR relaxation times. This study aims to explore the potential of micellar 19F MR imaging (MRI) tracers, synthesized by polymerization-induced self-assembly (PISA), as alternative theranostic agents for simultaneous imaging and release of the non-steroidal antileprotic drug clofazimine. In vitro, under physiological conditions, these micelles demonstrate sustained drug release. In vivo, throughout the drug release process, they provide a highly specific and sensitive 19F MRI signal. Even after extended exposure, these fluoropolymer tracers show biocompatibility, as confirmed by the histological analysis. Moreover, the characteristics of these polymers can be broadly adjusted by design to meet the wide range of criteria for preclinical and clinical settings. Therefore, micellar 19F MRI tracers display physicochemical properties suitable for in vivo imaging, such as relaxation times and non-toxicity, and high performance as drug carriers, highlighting their potential as both diagnostic and therapeutic tools.
Asunto(s)
Imagen por Resonancia Magnética con Fluor-19 , Nanopartículas , Nanomedicina Teranóstica , Animales , Imagen por Resonancia Magnética con Fluor-19/métodos , Nanopartículas/química , Nanopartículas/uso terapéutico , Materiales Biocompatibles/química , Micelas , Fluorocarburos/química , Flúor/química , Ratones , Imagen por Resonancia Magnética/métodos , Humanos , HalogenaciónRESUMEN
Polymerization-induced self-assembly (PISA) is conducted in a non-polar medium (n-dodecane) via reversible complexation-mediated polymerization (RCMP). Stearyl methacrylate (SMA) is used to synthesize a macroinitiator, and subsequent block polymerization of benzyl methacrylate (BzMA) from the macroinitiator in n-dodecane afforded a PSMA-PBzMA block copolymer, where PSMA is poly(stearyl methacrylate) and PBzMA is poly(benzyl methacrylate). Because PSMA is soluble but PBzMA is insoluble in n-dodecane, the block copolymer formed a self-assembly during the block polymerization (PISA). Spherical micelles, worms, and vesicles are obtained, depending on the degrees of polymerization of PSMA and PBzMA. "One-pot" PISA is also attained; namely, BzMA is directly added to the reaction mixture of the macroinitiator synthesis, and PISA is conducted in the same pot without purification of the macroinitiator. The spherical micelle and vesicle structures are also fixed using a crosslinkable monomer during PISA. RCMP-PISA is highly attractive as it is odorless and metal-free. The "one-pot" synthesis does not require the purification of the macroinitiator. RCMP-PISA can provide a practical approach to synthesize self-assemblies in non-polar media.
Asunto(s)
Alcanos , Metacrilatos , Polímeros , Ácidos Polimetacrílicos , Polimerizacion , Polímeros/química , Metacrilatos/química , MicelasRESUMEN
Liquid crystalline nanoparticles (LC NPs) are a kind of polymer NPs with LC mesogens, which can form special anisotropic morphologies due to the influence of LC ordering. Owing to the stimuli-responsiveness of the LC blocks, LC NPs show abundant morphology evolution behaviors in response to external regulation. LC NPs have great application potential in nano-devices, drug delivery, special fibers and other fields. Polymerization-induced self-assembly (PISA) method can synthesize LC NPs at high solid content, reducing the harsh demand for reaction solvent of the LC polymers, being a better choice for large-scale production. In this review, we introduced recent research progress of PISA-LC NPs by dividing them into several parts according to the LC mesogen, and discussed the improvement of experimental conditions and the potential application of these polymers.
RESUMEN
The kinetics of heterogeneous polymerization is determined directly using small-angle X-ray scattering (SAXS). This important advancement is exemplified for the synthesis of sterically-stabilized diblock copolymer nanoparticles by reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization of benzyl methacrylate (BzMA) in mineral oil at 90 °C. The principle of mass balance is invoked to derive a series of equations for the analysis of the resulting time-resolved SAXS patterns. Importantly, there is a continuous change in the X-ray scattering length density for the various components within the reaction mixture. This enables the volume fraction of unreacted BzMA monomer to be calculated at any given time point, which enables the polymerization kinetics to be monitored in situ directly without relying on supplementary characterization techniques. Moreover, SAXS enables the local concentration of both monomer and solvent within the growing swollen nanoparticles to be determined during the polymerization. Data analysis reveals that the instantaneous rate of BzMA polymerization is proportional to the local monomer concentration within the nanoparticles. In principle, this powerful new time-resolved SAXS approach can be applicable to other heterogeneous polymerization formulations.
RESUMEN
Precise control over the chirality and morphologies of polymer assemblies, a remaining challenge for both chemists and materials scientists, is receiving ever-increasing attention in the recent years. Herein, we report the subtle manipulation of the achiral spacers from the chiral stereocenter to the azobenzene (Azo) unit, of which the chiroptical consistency or chiroptical inversion of self-assemblies could be successfully controlled and present "two-fold" odd-even effect. Furthermore, morphological transitions from 0D spherical micelles, 1D worms, and nanowires to 3D vesicles, spindle- and dumbbell-shaped vesicles were also unexpectedly found to exhibit odd-even correlations. These observations were collectively elucidated by mesomorphic properties, stacking modes, chiroptical dynamics, and stimuli-responsive behaviors. Negligible modifications to the spacer structures can enable remarkable modulation of supramolecular chirality and anisotropic topologies in polymer assemblies, which is of great significance for the design of complex chiral functional polymers.
RESUMEN
Over the past decade, polymerization-induced self-assembly (PISA) has fully proved its versatility for scale-up production of block copolymer nanoparticles with tunable sizes and morphologies; yet, there are still some limitations. Recently, seeded PISA approaches combing PISA with heterogeneous seeded polymerizations have been greatly explored and are expected to overcome the limitations of traditional PISA. In this review, recent advances in seeded PISA that have expanded new horizons for PISA are highlighted including i) general considerations for seeded PISA (e.g., kinetics, the preparation of seeds, the selection of monomers), ii) morphological evolution induced by seeded PISA (e.g., from corona-shell-core nanoparticles to vesicles, vesicles-to-toroid, disassembly of vesicles into nanospheres), and iii) various well-defined nanoparticles with hierarchical and sophisticated morphologies (e.g., multicompartment micelles, porous vesicles, framboidal vesicles, AXn -type colloidal molecules). Finally, new insights into seeded PISA and future perspectives are proposed.
Asunto(s)
Micelas , Nanosferas , Polimerizacion , Polímeros , CinéticaRESUMEN
Polymerization-induced self-assembly incorporating liquid crystallization, as a polymerization-induced hierarchical self-assembly (PIHSA) method to produce polymeric particles with anisotropic morphologies facilely and efficiently, has drawn wide attention recently. However, the means of regulating the morphologies of liquid crystalline (LC) polymer assemblies still need to be explored. Herein, a route is presented to fabricate the twisted ribbons via PIHSA containing azobenzene based on poor reversible addition-fragmentation chain transfer (RAFT) control, called poorly controlled PIHSA. Cyano-4-(dodecylsulfanylthiocarbonyl)sulfanyl pentanoic acid-2-(2-pyridyldithio) ethyl ester is used as the RAFT agent with poor controllability, and the morphological evolution from ribbons to twisted ribbons can be observed in the corresponding PIHSA system. The formation mechanism of the twisted ribbons is studied systematically and the broad molecular weight distribution is considered to be the decisive factor. Moreover, the supramolecular chirality induced by symmetry breaking is also related to the twist of the ribbons. This study enriches the methods of controlling the morphologies of LC polymer particles and is helpful for further clarifying the mechanism of PIHSA.
Asunto(s)
Compuestos Azo , Polímeros , Polimerizacion , Polímeros/química , CristalizaciónRESUMEN
Hydrolytically degradable block copolymer nanoparticles are prepared via reverse sequence polymerization-induced self-assembly (PISA) in aqueous media. This efficient protocol involves the reversible addition-fragmentation chain transfer (RAFT) polymerization of N,N'-dimethylacrylamide (DMAC) using a monofunctional or bifunctional trithiocarbonate-capped poly(ϵ-caprolactone) (PCL) precursor. DMAC monomer is employed as a co-solvent to solubilize the hydrophobic PCL chains. At an intermediate DMAC conversion of 20-60 %, the reaction mixture is diluted with water to 10-25 % w/w solids. The growing amphiphilic block copolymer chains undergo nucleation to form sterically-stabilized PCL-core nanoparticles with PDMAC coronas. 1 Hâ NMR studies confirm more than 99 % DMAC conversion while gel permeation chromatography (GPC) studies indicate well-controlled RAFT polymerizations (Mw /Mn ≤1.30). Transmission electron microscopy (TEM) and dynamic light scattering (DLS) indicate spheres of 20-120â nm diameter. As expected, hydrolytic degradation occurs within days at 37 °C in either acidic or alkaline solution. Degradation is also observed in phosphate-buffered saline (PBS) (pHâ 7.4) at 37 °C. However, no degradation is detected over a three-month period when these nanoparticles are stored at 20 °C in deionized water (pHâ 6.7). Finally, PDMAC30 -PCL16 -PDMAC30 nanoparticles are briefly evaluated as a dispersant for an agrochemical formulation based on a broad-spectrum fungicide (azoxystrobin).
RESUMEN
Polymersomes are an exciting modality for drug delivery due to their structural similarity to biological cells and their ability to encapsulate both hydrophilic and hydrophobic drugs. In this regard, the current work aimed to develop multifunctional polymersomes, integrating dye (with hydrophobic Nile red and hydrophilic sulfo-cyanine5-NHS ester as model drugs) encapsulation, stimulus responsiveness, and surface-ligand modifications. Polymersomes constituting poly(N-2-hydroxypropylmethacrylamide)-b-poly(N-(2-(methylthio)ethyl)acrylamide) (PHPMAm-b-PMTEAM) are prepared by aqueous dispersion RAFT-mediated polymerization-induced self-assembly (PISA). The hydrophilic block lengths have an effect on the obtained morphologies, with short chain P(HPMAm)16 affording spheres and long chain P(HPMAm)43 yielding vesicles. This further induces different responses to H2O2, with spheres fragmenting and vesicles aggregating. Folic acid (FA) is successfully conjugated to the P(HPMAm)43, which self-assembles into FA-functionalized P(HPMAm)43-b-P(MTEAM)300 polymersomes. The FA-functionalized P(HPMAm)43-b-P(MTEAM)300 polymersomes entrap both hydrophobic Nile red (NR) and hydrophilic Cy5 dye. The NR-loaded FA-linked polymersomes exhibit a controlled release of the encapsulated NR dye when exposed to 10 mM H2O2. All the polymersomes formed are stable in human plasma and well-tolerated in MCF-7 breast cancer cells. These preliminary results demonstrate that, with simple and scalable chemistry, PISA offers access to different shapes and opens up the possibility of the one-pot synthesis of multicompartmental and responsive polymersomes.
RESUMEN
It is well-known that polymerization-induced self-assembly (PISA) is a powerful and highly versatile technique for the rational synthesis of colloidal dispersions of diblock copolymer nanoparticles, including spheres, worms or vesicles. PISA can be conducted in water, polar solvents or non-polar media. In principle, the latter formulations offer a wide range of potential commercial applications. However, there has been just one review focused on PISA syntheses in non-polar media and this prior article was published in 2016. The purpose of the current review article is to summarize the various advances that have been reported since then. In particular, PISA syntheses conducted using reversible addition-fragmentation chain-transfer (RAFT) polymerization in various n-alkanes, poly(α-olefins), mineral oil, low-viscosity silicone oils or supercritical CO2 are discussed in detail. Selected formulations exhibit thermally induced worm-to-sphere or vesicle-to-worm morphological transitions and the rheological properties of various examples of worm gels in non-polar media are summarized. Finally, visible absorption spectroscopy and small-angle X-ray scattering (SAXS) enable in situ monitoring of nanoparticle formation, while small-angle neutron scattering (SANS) can be used to examine micelle fusion/fission and chain exchange mechanisms.
RESUMEN
Organic-inorganic nanocomposite particles, possessing defined morphologies, represent the next frontier in advanced materials due to their superior collective performance. In this pursuit of efficient preparation of composite nanoparticles, a series of diblock polymers polystyrene-block-poly(tert-butyl acrylate) (PS-b-PtBA) were initially synthesized using the Living Anionic Polymerization-Induced Self-Assembly (LAP PISA) technique. Subsequently, the tert-butyl group on the tert-butyl acrylate (tBA) monomer unit in the diblock copolymer, yielded from the LAP PISA process, was subjected to hydrolysis using trifluoroacetic acid (CF3COOH), transforming it into carboxyl groups. This resulted in the formation of polystyrene-block-poly(acrylic acid) (PS-b-PAA) nano-self-assembled particles of various morphologies. The pre-hydrolysis diblock copolymer PS-b-PtBA produced nano-self-assembled particles of irregular shapes, whereas post-hydrolysis regular spherical and worm-like nano-self-assembled particles were generated. Utilizing PS-b-PAA nano-self-assembled particles that containing carboxyl groups as polymer templates, Fe3O4 was integrated into the core region of the nano-self-assembled particles. This was achieved based on the complexation between the carboxyl groups on the PAA segments and the metal precursors, facilitating the successful synthesis of organic-inorganic composite nanoparticles with Fe3O4 as the core and PS as the shell. These magnetic nanoparticles hold potential applications as functional fillers in the plastic and rubber sectors.