Cyclic Continuous Glycation Enhanced Dispersibility of Myofibrillar Protein: Reaction Efficiency and Sites Modification.

Reaction efficiency in glycation lacks sufficient attention, leading to the waste of process costs. Cyclic continuous glycation (CCG) is an effective approach to accelerate covalent binding between myofibrillar protein (MP) and glucose. This study elucidated that CCG promoted the exposure of reactive glycated sites in MP with full unfolding of secondary and tertiary structures. Notably, the glycation rate was significantly increased by 65.43%. Physicochemical properties indicated that MP-glucose conjugates with high graft degree exhibited favorable solubility, dispersibility, and thermal stability. Furthermore, proteomics was applied to reveal the glycated sites and products in glycoconjugates of MP. Glycation preferentially acted on the tails of the myosin heavy chain. The glucosylation modification on the head region was enhanced by CCG contributing to the inhibition of the head-head interaction. Overall, this study systematically clarifies the mechanism of CCG, providing a theoretical basis for the application of glycation in innovative meat products.

Improvement on gel properties of chicken myofibrillar protein with electron beam irradiation: Based on protein structure, gel quality, water state.

This study aimed to investigate the effects of electron beam (E-beam) irradiation at different doses (0-15 kGy) on the solubility, rheological properties, emulsification characteristics, and moisture distribution of chicken myofibrillar proteins (MPs). Irradiation treatment notably increased the solubility, surface hydrophobicity, emulsification properties, and apparent viscosity of MPs, based on conformational changes caused by irradiation-induced oxidative denaturation of proteins. However, high doses of irradiation (15 kGy) induced in excessive cross-linking and aggregation of proteins, reducing the solubility, emulsification properties, and shear stress. Degradation of myosin heavy and light chains in irradiated MPs increased the content of ß-turns and random coils. Additionally, the initial relaxation times of T21 and T22 in irradiated protein gels were reduced, and the peak value of P21 was increased, which improved the water-capturing ability of protein gels. Altogether, these results findings suggest that electron beam irradiation can be applied as a potential technique for modifying muscle proteins.

Modifying physicochemical properties, rheology, and creaming stability of milk fat globule and membrane through ultrasound treatment.

The healthy benefits of milk fat globules and membrane (MFGs/MFGM) ingredients are increasingly recognized in the dairy industry. In this research, we examined the effects of ultrasonic treatment on the physicochemical and rheological properties, as well as the emulsions stability of MFGs/MFGM derived from bovine raw milk. Fresh milk was subjected to sonication at frequencies of 20 kHz and 40 kHz, either individually or simultaneously, for durations of 5 min or 15 min, using work/rest cycles of 5 s on and 3 s off. Bovine milk, without any treatment, served as the control. Regardless of the intensity difference, ultrasonic treatment for 5 min resulted in more pronounced changes in the regions of Amide Ⅱ (1600-1500 cm-1), Amide Ⅲ (1500-1200 cm-1), and fingerprint region (1200-1900 cm-1) compared to both the 15 min treatments and control MFGs/MFGM. Principal component analysis (PCA) conducted on the entire spectra, as well as in the regions of Amide Ⅰ, Amide Ⅱ, and the fingerprint spectra, clustered the 5 min treatment distinctly from the control and MFGs/MFGM ultrasonically treated for 15 min. MFGs/MFGM samples following 20 kHz and 40 kHz synchronous treatment for 15 min exhibited lower absorbance bands at 1727-1726 cm-1, whereas a higher content at 1740 cm-1 was observed compared to control MFGs/MFGM. Additionally, a more significant reduction in the intramolecular ß-sheet content in 20 + 40 kHz/ 15 min treatment was observed. According to the sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) patterns, a diminished intensity of Periodic Acid Schiff 6/7 (PAS 6/7) bands was observed across all the MFGs/MFGM. Ultrasonic treatment retained more caseins while reducing the ß -LG levels compared to the controls, enhancing the stability of MFGs/MFGM, except in MFGs/ MFGM subjected to 20 and 40 kHz simultaneously treated for 15 min. The irregular sphericity of fat globules was noted particularly in MFGs/MFGM treated at 20 kHz independently or in combination with 40 kHz for 15 min. According to the confocal laser scanning microscopy (CLSM), ultrasonic treatment facilitated the binding of caseins or whey proteins to the MFGs surface and induced flocculation of membrane proteins. Hierarchical cluster analysis (HCA) heat map further underscored the impact of ultrasonic treatments on the structural and compositional changes, as well as rheology and emulsions stability, of MFGs/MFGM.

Strategy to kill two birds with one stone: High internal phase Pickering emulsions to modulate 3D printed pork texture as a dysphagia diet.

This study proposes a kill two birds with one stone strategy to improve the health and safety of pork with high internal phase Pickering emulsions (HIPPEs). HIPPEs improved the pseudoplasticity and viscosity (from 619.3 to 1712 Pa·s at 0.1 s-1) of the pork, favoring smooth extrusion and adhesion of the ink. Shear recovery of pork gel increased from 39.20 % to 77.78 % by addition of HIPPEs. HIPPEs enhanced the pork gel viscoelastic properties (K4 = 341.29, K5 = 453.11) and yield stress (268.55 Pa). HIPPEs-adjusted pork gel (HPG) has favorable 3D printing, pork aroma, safe swallowing (level 5 food), and high digestibility (80.40 %), demonstrating its potential as a dysphagia diet. HPG reduced the cooking loss of pork (from 30.8 % to 1.9 %), which is suitable for dysphagic patients with reduced salivation. HIPPEs adjusts the properties of pork gel by filling and winding gel networks. These results provide new ideas for the development of special formula foods.

Effects of Polymer-Curing Agent Ratio on Rheological, Mechanical Properties and Chemical Characterization of Epoxy-Modified Cement Composite Grouting Materials.

This study designs and uses water-borne epoxy resin (WBER) and curing agent (CA) to modify traditional cement-based grouting for tunnels. The purpose of this paper is to analyze the rheological and mechanical properties of composite grouting with different ratios of WBER and CA and analyze the modification mechanism by means of chemical characterization to explore the feasibility of WBER as a high-performance modifier for tunnel construction. The composite grouting is prepared by mixing cement paste with polymer emulsion. A series of experiments was carried out to investigate the effects of WBER and CA, including the slump test, viscosity, rheological curve, setting time, bleeding rate, grain size distribution, zeta potential, compressive and splitting tensile strength, X-ray diffraction(XRD), Fourier-transform infrared spectroscopy (FT-IR), and scanning electron microscopy (SEM), on the composite grout. The results show that WBER improves grout fluidity, which decreases in combination with CA, while also reducing the average particle size of the composite grout for a more rational size distribution. Optimal uniaxial (38.9%) and splitting tensile strength (48.7%) of the grout are achieved with a WBER to CA mass ratio of 2:1. WBER accelerates cement hydration, with the modification centered on the reaction between free Ca2+ and polymer-OH, significantly enhancing the strength, fluidity, and stability of the polymer-modified composite grout compared to traditional cement-based grouting.

Study on the Storage Stability and Rheological Property of Bio-Oil/Lignin Composite-Modified Asphalt.

The objective of this study is to investigate the storage stability and rheological property of bio-oil/lignin composite-modified asphalt. The composite-modified asphalt with different proportions of bio-oil was prepared and cured at 105 °C, 135 °C, and 165 °C for 24 h and 48 h. The storage stability of the composite-modified asphalt was evaluated based on the softening point difference, the storage stability index derived from rotational viscosity, the segregation rate based on temperature sweep, and the non-recoverable creep compliance measured through the Multiple Stress Creep Recovery test. The storage stability of bio-oil/lignin composite-modified asphalt was evaluated through testing and analysis of its infrared spectroscopy and scanning electron microscopy before and after thermal storage. The research results indicate that the maximum difference in softening point is 0.9 °C, and the calculated storage stability index is generally below 0.1. The maximum value of the segregation rate is 0.43, indicating excellent storage stability of the bio-oil/lignin composite-modified asphalt. According to the results from infrared spectroscopy, no chemical reactions occurred during the storage process of the composite-modified asphalt. The scanning electron microscope confirmed that the samples became more stable after 48 h of storage.

Effect of Ionic Liquids with Different Structures on Rheological Properties of Water-Based Drilling Fluids and Mechanism Research at Ultra-High Temperatures.

The rheology control of water-based drilling fluids at ultra-high temperatures has been one of the major challenges in deep or ultra-deep resource exploration. In this paper, the effects of 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonimide) (ILA), 1-ethyl-3-methylimidazolium tetrafluoroborate (ILB) and N-methyl, butylpyrrolidinium bis(trifluoromethanesulfonimide) (ILC) on the rheological properties and filtration loss of polymer-based slurries at ultra-high temperatures (200 °C and 240 °C) are investigated by the American Petroleum Institute (API) standards. The results show that ionic liquids with different structures could improve the high-temperature rheological properties of polymer-based drilling fluids. The rheological parameter value (YP/PV) of the polymer-based slurry formulated with ILC is slightly higher than that with ILA at the same concentration, while the YP/PV value of the polymer-based slurry with ILA is slightly higher than that with ILB, which is consistent with the TGA thermal stability of ILA, ILB, and ILC; the thermal stability of ILC with pyrrolidine cations is higher than that of ILA with imidazole cations, and the thermal stability of ILA with bis(trifluorosulfonyl)amide anions is higher than that of ILB with tetrafluoroborate anions. Cation interlayer exchange between organic cation and sodium montmorillonite can improve the rheological properties of water-based drilling fluids. And meantime, the S=O bond in bis(trifluorosulfonyl)amide ions and the hydroxyl group of sodium montmorillonite may form hydrogen bonds, which also may increase the rheological properties of water-based drilling fluids. ILA, ILB, and ILC cannot reduce the filtration loss of polymer-based drilling fluids at ultra-high temperatures.

Find alternative for bovine and porcine gelatin: Study on physicochemical, rheological properties and water-holding capacity of chicken lungs gelatin by ultrasound treatment.

In this study, the study on physicochemical, rheological properties and water-holding capacity of gelatin of chicken lungs was investigated to replace bovine and porcine gelatin. The extraction rates of chicken, bovine and porcine lung gelatin by ultrasound assisted alkaline protease were 52.12 %, 69.06 % and 70 %, respectively. Three lung gelatins had similar molecular weight distribution in SDS-PAGE with low content of high molecular weight subunits. The amino acid content of bovine lung gelatin (18.03 %) was higher than in chicken (16.62 %) and porcine lung (15.30 %). The highest intensity of 2θ = 7.5° diffraction peak in bovine lung gelatin was observed, which indicated that the triple helix content of bovine lung gelatin was higher than that of chicken and porcine lung gelatin. The lowest apparent viscosity of chicken lung gelatin was 0.253 mPa·s, but the highest water holding capacity of chicken lung gelatin was 331.72 %. Therefore, chicken lung gelatin can be used as a substitute for bovine and porcine gelatin in some functional properties.

Rheological, textural, and pasting properties of A- and B-type wheat starches in relation to their molecular structures.

A- and B-type wheat starches have significant differences in rheological, textural, and pasting properties; however, the structure-property relationship is not fully revealed. Herein, the physicochemical characteristics and molecular structures of A- and B-type starches isolated from three wheat varieties with different apparent amylose contents (2.41%-27.93%) were investigated. A-type starches exhibited higher pasting viscosities, relative crystallinity, onset gelatinization temperatures, and enthalpies, while B-type starches had wide gelatinization temperature ranges. B-type starches had lower resistant starch contents than their A-type counterparts, but B-type starches formed more stable gels and had a lower tendency to retrograde, resulting in lower hardness, storage (G') and loss (G'') moduli but higher tan δ values. A-type starches had lower contents of short amylose (100 ≤ X < 1000) and amylopectin chains (DP 6-12) than B-type. These findings elucidated the differences in molecular structures between A- and B-type starches, which can contribute to their effective application.

Impact of konjac glucomannan with varied deacetylation degrees on plant-based meat analogue: Study on the gel properties, digestibility, and microstructure.

Polysaccharides are widely used to improve the quality of plant-based meat analogue (PMA). In this study, four kinds of konjac glucomannan (KG) with different deacetylation degrees (DD) were prepared, namely KG1 (native KG, DD = 0.00 %), KG2 (DD = 41.40 %), KG3 (DD = 80.01 %) and KG4 (DD = 89.07 %), and their effects on the quality of PMA were studied. Results manifested that KG3 improved the hardness (from 3017.16 g to 3307.16 g) and protein digestibility (from 49.65 % to 53.01 %) of PMA without reducing the P21, KG2 and KG4 were less effective than KG3, while KG1 led to a significant decline in the hardness and protein digestibility of PMA. The rheological properties and intermolecular force analysis showed that the partially deacetylated KG was more conducive to improving the G' of the protein system during heating and the proportion of covalent bonds in PMA. These findings suggested that partially deacetylated KG was more promising than native or highly deacetylated KG in PMA. Furthermore, scanning electron microscopy revealed that the morphology of KG gradually changed from fine filaments, to coarse filaments, short filaments and granules as DD increased. This study provides a theoretical basis for the application of partially deacetylated KG in PMA.

Rheological and Structural Characterization of Carrageenans during Depolymerization Conducted by a Marine Bacterium Shewanella sp. LE8.

Carrageenans were widely utilized as thickening and gelling agents in the food and cosmetic industries, and their oligosaccharides have been proven to possess enhanced physicochemical and biological properties. In this study, Shewanella sp. LE8 was utilized for the depolymerization of κ-, ι-, and λ-carrageenan under conditions of fermentation. During a 24-h fermentation at 28 °C, the apparent viscosity of κ-, ι-, and λ-carrageenan decreased by 53.12%, 84.10%, and 59.33%, respectively, accompanied by a decrease in storage modulus, and loss modulus. After a 72-h fermentation, the analysis of methylene blue and molecular weight distribution revealed that ι-carrageenan was extensively depolymerized into smaller polysaccharides by Shewanella sp. LE8, while exhibiting partial degradation on κ- and λ-carrageenan. However, the impact of Shewanella sp. LE8 on total sugars was found to be limited; nevertheless, a significant increase in reduced sugar content was observed. The ESIMS analysis results revealed that the purified components obtained through ι-carrageenan fermentation for 72 h were identified as tetrasaccharides, while the two purified components derived from λ-carrageenan fermentation consisted of a hexasaccharide and a tetrasaccharide, respectively. Overall, the present study first reported the depolymerization of ι-and λ-carrageenan by Shewanella and suggested that the Shewanella could be used to depolymerize multiple carrageenans, as well as complex polysaccharides derived from red algae, to further obtain their oligosaccharides.

Effects of Exidia yadongensis polysaccharide as emulsifier on the stability, aroma, and antioxidant activities of fat-free stirred mango buffalo yogurt.

Because of the poor stability and rheological properties of fat-free stirred yogurt fortified with fruit pulp, new functional polysaccharides as a natural emulsifier, which can increase viscosity in the aqueous phase, may be needed. This study aimed to evaluate the effects of Exidia yadongensis polysaccharide (EYP) as emulsifier on the stability, aroma, and antioxidant activities of mango buffalo yogurt at 4 °C for 25 days. The yogurt with 15 g/L EYP gave a higher content of 215 g/L total solids, 11.3 g/L exopolysaccharides, 0.10 g/L total polyphenols, 630.5 g/L water-holding capacity, and 11.43 g/kg total free amino acids, and maintained better texture, DPPH scavenging activity of 54.05 % and OH scavenging rates of 67.16 %. Moreover, the EYP exhibited the expected ability to weaken postacidification, syneresis, and growth of microorganism, and greatly promote the textural, rheological properties, suspension stability, microstructure, and aroma profiles of stirred mango-flavored buffalo yogurt (p < 0.05). In addition, the addition of 15 g/L EYP can inhibit protein degradation and improve the stability of secondary structure of the protein complex in mango yogurt during 25 days of storage. Therefore, EYP (15 g/L) could be used as natural positive functional factors and emulsifiers in such fat-free stirred yogurt industry.

Comparative Analysis of Gracilaria chouae Polysaccharides Derived from Different Geographical Regions: Focusing on Their Chemical Composition, Rheological Properties, and Gel Characteristics.

Polysaccharides derived from diverse sources exhibit distinct rheological and gel properties, exerting a profound impact on their applicability in the food industry. In this study, we collected five Gracilaria chouae samples from distinct geographical regions, namely Rizhao (RZ), Lianyungang (LYG), Ningde (ND), Beihai (BH), and a wild source from Beihai (BHW). We conducted analyses on the chemical composition, viscosity, and rheological properties, as well as gel properties, to investigate the influence of chemical composition on variations in gel properties. The results revealed that the total sugar, sulfate content, and monosaccharide composition of G. chouae polysaccharides exhibit similarity; however, their anhydrogalactose content varies within a range of 15.31% to 18.98%. The molecular weight distribution of G. chouae polysaccharides ranged from 1.85 to 2.09 × 103 kDa. The apparent viscosity of the LYG and BHW polysaccharides was relatively high, whereas that of RZ and ND was comparatively low. The gel strength displayed a similar trend. BHW and LYG exhibited solid-like behavior, while ND, RZ, and BH demonstrated liquid-like characteristics at low frequencies. The redundancy analysis (RDA) analysis revealed a positive correlation between the texture profile analysis (TPA) characteristics and anhydrogalactose. The study could provide recommendations for the diverse applications of G. chouae polysaccharides derived from different geographical regions.

Effects of konjac glucomannan with different degrees of deacetylation on the properties and structure of wheat gluten protein.

The properties and structure of gluten protein with different deacetylation degrees of konjac glucomannan (KGM) were investigated, in an attempt to improve the quality of gluten protein in flour products. Results showed that deacetylated KGM (DKGM) could improve the textural properties and enhance the thermal stability of gluten protein. DKGM increased the water holding capacity and shortened the T2 relaxation time of gluten after removing some acetyl groups. As the deacetylation degree increased, the hardness and adhesiveness of gluten gels gradually increased, while the springiness decreased. In addition, the presence of DKGM promoted the conversion from free sulfhydryl to disulfide bonds and increased the ß-sheet content in gluten protein. The low-deacetylation KGM decreased the surface hydrophobicity and fluorescence intensity of gluten protein, and the microstructures of gluten gels became more compact. Compared with gluten protein-KGM complex gel, the degradation temperature of gluten protein-DKGM complex gels was observed to increase by >3 °C. Overall, the low-deacetylation KGM was beneficial for improving the physicochemical properties and maintaining the network structure of gluten protein. This study provides valuable references and practical insights to improve gluten quality in the flour industry.

Effects of Premna microphylla turcz polysaccharide on rheological, gelling, and structural properties of mung bean starch and their interactions.

The aim of this study was to investigate the effects of Premna microphylla turcz polysaccharide (PMP) on the rheological, gelling, and structural properties of mung bean starch (MBS) and their potential interaction mechanism. Results showed that the addition of PMP significantly improved the pasting properties, rheological properties, water holding capacity, and thermostability of MBS. The texture tests showed a decrease in hardness, gumminess and chewiness, indicating the retrogradation of MBS was inhibited. Scanning electron microscopy (SEM) suggested the MBS-PMP composite gels expressed a denser microstructure with obvious folds and tears. Moreover, the results of X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR) and interaction force tests revealed the main forces between MBS and PMP were hydrogen bonds and hydrophobic interactions to form composite gels with great gelling properties. These results facilitate the practical application of MBS and PMP, and provide some references for understanding the interaction mechanism between starch and polysaccharide.

The Non-Denatured Processing of Brasenia schreberi Mucilage-Characteristics of Hydrodynamic Properties and the Effect on In Vivo Functions.

Food non-denatured processes, such as freeze-drying and grinding, are commonly applied to raw materials with good bioactive functions. Although the functional components are maintained, whether structural and physical changes impact the in vivo function is often ignored in practical situations. Brasenia schreberi mucilage (BSM) has a significant alleviation effect on DSS-induced colitis. This work focused on the influence of non-denatured manufacture on the colonic benefits of BSM-based products. First, three forms of products including fresh mucilage (FM), freeze-dried products (FS), and freeze-dried powder (FP) were prepared. Then, their in vitro physiochemical properties were compared, analyzing their influence on the gut inflammation degree, microbial composition, and SCFA production in mice. The results suggested that the water retention rate of FS and FP was decreased to 34.59 ± 3.85%, and 9.93 ± 1.76%. The viscosity of FM, FS, and FP was 20.14 Pa∙s, 4.92 Pa∙s, and 0.41 Pa∙s, respectively. The freeze-drying and grinding process also damaged the lamellar microstructure of BSM. Then, animal tests showed that colitis mice intervened with FM, FS, and FP had disease activity scores of 2.03, 3.95, and 4.62. Meanwhile, FM notably changed the gut microbial composition and significantly increased propionate and butyrate levels. It seemed that the distinct colitis alleviation efficacy of BSM-based products is attributed to different hydrodynamic properties in the gut. FM had relatively higher viscosity and correspondingly high nutritional density in the gut lumen, which stimulates Firmicutes growth and promotes butyrate production, and thereby exhibited the best efficiency on protecting from colitis.

Investigation of the Properties of High-Viscosity Modified Asphalt Binder under Hygrothermal Environments.

High-viscosity modified asphalt binder (HVMA) is used widely as a polymer-modified binder in porous asphalt pavement because it can improve the cohesiveness of the asphalt mixture. However, because of the high voidage in the mixture, HVMA is vulnerable to aging induced by temperature, oxygen, water, sunlight, and other climatic conditions, which degrades the performance of pavement. The properties of asphalt binder are affected adversely by the effects of hygrothermal environments in megathermal and rainy areas. Therefore, it is essential to study the aging characteristics of HVMA under the influence of hygrothermal environments to promote its application as a high-viscosity modifier. A hygrothermal cycle aging test (HCAT) was designed to simulate the aging of HVMA when rainwater was kept inside of the pavement after rainfall in megathermal areas. One kind of base bitumen and three kinds of HVMA (referred to as SBS, A, and B, respectively) were selected in this study. Short-term aging tests, hygrothermal cycling aging tests, and long-term aging tests were performed on the base bitumen and three kinds of modified asphalt binder. Fourier-transform infrared spectroscopy (FTIR), thermo-gravimetric analysis (TGA), and dynamic shear rheological (DSR) tests were used to evaluate the properties of the binders on the micro and macro scales. By comparing the index variations of the four binders before and after aging, the effects of the hygrothermal environment on the properties of HVMA were studied. It was found that the effects of the hygrothermal environment expedited the decomposition of the polymer and the formation of carbonyl groups compared with the TFOT and PAV test, which TGA confirmed further. Moreover, the thermal stability of the samples was improved after HCAT. In addition, the master curves of the complex modulus showed that hygrothermal cycles made the high-temperature rutting resistance of asphalt binder increase significantly. All of the results above verified that the effect of hygrothermal cycling could accelerate the aging of HVMA and shorten its service life.

Mechanisms underlying the changes in the structural, physicochemical, and emulsification properties of porcine myofibrillar proteins induced by prolonged pulsed electric field treatment.

This study aimed to explore how pulsed electric field (PEF) treatment affects the structural, physicochemical, and emulsification properties of porcine-derived myofibrillar proteins (MPs). Increasing PEF treatment induced partial polarization and protein unfolding, resulting in notable denaturation that affected both the secondary and tertiary structures. PEF treatment also improved the solubility and emulsification ability of MPs by reducing their pH and surface hydrophobicity. Confocal laser scanning microscopy confirmed the effective adsorption of MPs and PEF-treated MPs at the oil/water interface, resulting in well-fabricated Pickering emulsions. A weak particle network increased the apparent viscosity in short-term PEF-treated Pickering emulsions. Conversely, in emulsions with long-term PEF-treated MP, rheological variables decreased, and dispersion stability increased. These results endorse the potential application of PEF-treated porcine-derived MPs as efficient Pickering stabilizers, offering valuable insights into the creative use of PEF for enhancing high-quality meat products, meeting the increasing demand for clean-label choices.

Melt-spun polylactide/ethylene vinyl alcohol copolymer fiber.

Polylactide/ethylene vinyl alcohol copolymer (PLA/EVOH) blends and fibers with different weight ratios were prepared by melt blending, and two-step melt spinning, respectively. PLA and EVOH in PLA/EVOH blends were immiscible. When EVOH content was ≤60 %, EVOH with the average diameter of about 3 µm was dispersed in PLA matrix uniformly. The dual continuous phases could be observed in PLA/EVOH blend with 70 wt% EVOH. When the EVOH content was ≥80 %, the spherical PLA phase with the diameter of 0.25 to 1 µm was dispersed in EVOH matrix. The introduction of EVOH as nucleating agent could promote the crystallization of PLA. Both PLA and EVOH components in PLA/EVOH blends formed individual crystal phases. The viscosity of PLA/EVOH blend with 5 % EVOH was lower than that of neat PLA. The viscosity of PLA/EVOH blends with the EVOH content of ≥10 % was much higher than that of neat PLA, which showed obvious shear thinning behavior. With the increase of EVOH content, the shear thinning behavior became obvious and the critical shear rate decreased gradually. The drawn PLA/EVOH fibers with the tensile strength of ≥16 cN/tex exhibited good mechanical properties. In addition, the introduction of EVOH could improve the hydrophilicity of PLA fibers.

Relationship between rheological properties, sensory perception, and overall acceptability of thickened liquids for dysphagia in young and old healthy individuals.

This study investigated the relationship between rheological properties, sensory perception, and overall acceptability in healthy young and old groups for dysphagia thickened liquids. Unflavored (UTL) and flavored (FTLP) thickened liquids were prepared using tap water or pomegranate juice at 10 different viscosity levels. The rheological properties were then evaluated via syringe flow test and line spread test (LST). When the apparent viscosity levels of UTL and FTLP were similar, the syringe test and LST results were also similar, indicating consistent flow behavior. Sensory perception evaluations showed that the young group better distinguished viscosity differences between stages compared to the old group. Regarding overall acceptability, the old group preferred samples with higher apparent viscosity than the young group. Principal component analysis and k-means cluster analysis were used to explore correlations between variables and classify thickened liquids into four groups. This can serve the foundation for standardized texture grades of dysphagia thickened liquids, considering rheological characteristics and sensory profiles.