Effectiveness of NGOs in mountainous solid waste management: A case study from Healing Himalayas in Rakchham, Himachal Pradesh, India.

Non-governmental organizations (NGOs) play a critical role in addressing solid waste management (SWM) challenges in remote mountain communities, including the ecologically fragile Himalayan region. This study evaluates the impact of Healing Himalayas, an NGO, in Rakchham village, Himachal Pradesh, India. The objectives were to evaluate the effectiveness of Healing Himalayas' decentralized SWM model in promoting stakeholder engagement and resource recovery, assess the role of collaborations between local authorities and the NGO in financing waste management practices, investigate the influence of tourism and seasonal variations on solid waste generation patterns and waste management practices in Rakchham, and material recovery facilities, followed by glass (36.7%), paper/cardboard (18.4%) and metal (4.1%). A fee-based system involving the local village council funded waste operations. Waste generation exhibited significant seasonal fluctuations, with tourism influxes driving increased volumes. Healing Himalayas' initiatives promoted community participation, with over 15 awareness workshops conducted. Key challenges included limited financial resources, inadequate infrastructure, lack of advanced treatment facilities and need for context-specific solutions like efficient wet waste management in cold climates. The study highlights Healing Himalayas' decentralized model's success in fostering stakeholder engagement, behavioural change and resource recovery. The findings inform effective strategies for NGO-led waste management initiatives tailored to remote Himalayan communities.

Unlocking the significant worldwide potential of better waste and resource management for climate mitigation: with particular focus on the Global South.

Numbers do matter; the Intergovernmental Panel on Climate Change (IPCC)'s 2010 data that the waste sector is responsible for just 3% of global greenhouse gas (GHG) emissions has led to the misperception that solid waste management (SWM) has little to contribute to climate mitigation. Global efforts to control methane emissions and divert organic waste from landfills had already reduced direct emissions. But end-of-pipe SWM has also been evolving into more circular waste and resource management, with indirect GHG savings from the 3Rs (reduce, reuse, recycle) which IPCC accounts for elsewhere in the economy. The evidence compiled here on both direct emissions and indirect savings demonstrates with high confidence that better waste and resource management can make a significant contribution to climate mitigation, and must form a core part of every country's nationally determined contribution. Even the most advanced countries can still achieve much from the 3Rs. In the Global South, the challenge of extending waste collection to all and stopping open dumping and burning (sustainable development goal 11.6.1), essential to improve public health, can be turned into a huge opportunity. Moving early to divert waste from landfill by separation at source and collecting clean organic and dry recycling fractions, will mitigate global GHG emissions, slash ocean plastics and create decent livelihoods. But this can only happen with targeted climate, plastics and extended producer responsibility finance; and help to local communities to help themselves.

Carbon nanotubes synthesis over coal ash based catalysts using polypropylene waste via CVD process: Influence of catalyst and reaction temperature.

Coal ash containing significant amount of SiO2 and Al2O3 is utilized as a catalyst substrate for carbon nanotubes (CNTs) synthesis. Three different types of catalysts were made by impregnating coal ash with cobalt, iron, and nickel. These catalysts were used to produce CNTs through pyrolysis of waste polypropylene followed by chemical vapor deposition. The influence of catalyst type and reaction temperature (700, 800 and 900 °C) on CNTs yield and its quality was studied in detail. The produced CNTs were characterized by thermogravimetric analysis (TGA), Raman scattering and electron microscopes (FESEM and HRTEM). The TGA results revealed that the Ni catalyst produced CNTs with highest yield (266 %) compared to those synthesized over and Fe (96 %) and Co (95 %). However, the yield of the CNTs from all three metal impregnated coal ash based catalysts was found to have decreased with increase in reaction temperature. The thermal stability of CNTs obtained over different catalysts followed the order of Fe (570 °C) > Ni (550 °C) > Co (530 °C). Further, the Raman analysis demonstrated that the produced CNTs over different catalysts showed increasing degree of graphitization with the rise in reaction temperature. Additionally, the ID/IG ratios indicated that CNTs produced from Fe catalyst showed highest degree of graphitization followed by Co and Ni. FESEM and HRTEM analysis showed that the coal ash based catalysts produced multiwalled CNTs and the diameter of the CNTs was increasing with the rise in catalysis temperature. Therefore, co-utilization of coal ash and waste plastic for production of high value CNTs can be a sustainable approach to waste management while actively contributing in circular economy.

Multi-criteria sustainability assessment of solid waste management in Jordan.

This study comprehensively evaluates Jordan's municipal solid waste (MSW) management sector from 2022 to 2030, in alignment with Jordan Vision 2030. This study introduces new sustainability indicators and innovative waste management alternatives to address the challenges of rapid industrialization and population growth. Four strategic scenarios-1) recycling, composting, and sanitary landfilling; 2) recycling, anaerobic digestion, and sanitary landfilling; 3) incineration and sanitary landfilling; and 4) sanitary landfilling alone-were assessed against the business-as-usual scenario. Using multi-criteria decision analysis (MCDA) and sensitivity analysis, this study evaluates net greenhouse gas emissions, annual operating expenses, revenue streams, and employment rates to measure environmental, economic, and social sustainability. The results indicate that Scenario 1 is the optimal scenario for integrating a material recovery facility (MRF) with a composting plant and sanitary landfill, achieving the lowest greenhouse gas emissions, annual costs, and employment opportunities. This study offers practical and sustainable solutions to Jordan's waste management challenges, provides novel insights through the developed MCDA and sensitivity analysis, and significantly contributes to sustainability research.

Study of the impact of structural factors and cleaning efficiency in reducing hazardous litter density and its related pollution in urban environment.

Cigarette filter is the most common hazardous litter that contains many pollutants including PAHs. The durability of this litter in the urban environment has an important effect on the rate of pollutant leakage. In this study, the leakage rate of PAHs from the littered cigarette filters was estimated by considering the affecting parameters on their durability in the urban environment. The results showed that the density of littered cigarette filters in the studied locations was 0.00048-0.13563 g/m2. The maximum spatial variation of the littered cigarette filter was 225 times. The average leakage of the total studied PAHs was estimated to be 2.048 µg/10 m2. The impact of structural factors and efficiency of urban cleaning in the estimated leakage was at most 2.4 times. It is necessary to change the behavior of citizens in littering the cigarette filter, considering its durability in the urban environment, to reduce the environmental and health consequences caused by the leakage of PAHs.

New circularity indicator for decision making in the stockpile management of construction and demolition waste: Perspectives of Australian practitioners.

Despite the increasing popularity of the circular economy, there remains a lack of consensus on how to quantify circularity, a critical aspect of the practical implementation of this model. To address this gap, this article examines the industry's perspective and efforts toward implementing the circular economy in real-world scenarios. We conducted 40 interviews with engineers, project leaders, and top-level managers in the Australian construction sector. Using Saldaña's coding approach, we analysed their views on circular economy practices and efforts within their organisations. Our findings reveal while waste minimisation, reduction of greenhouse gas emissions, and cost considerations are widely regarded as essential indicators of a successful circular economy model, the significance of waste storage and long-term stockpiling while awaiting treatment has been overlooked or under-emphasised in industry practices and academic literature. Stockpiling of waste has often been seen as a staging process in waste treatment. However, based on industry insights, it accumulates to the point of mismanagement when it becomes a safety and environmental concern. Addressing this oversight, we propose a storage circularity indicator that allows incorporating waste storage and stockpiling in circular economy models. Our research contributes to various environmental and waste management aspects, supporting policies and strategies for solid waste management and excessive stockpile prevention. By emphasising the significance of storage circularity, we clarify waste prevention techniques and address socio-economic issues such as the urgent need to reduce long-term stockpiling of solid waste. This work highlights the importance of decision-support tools in waste management to facilitate the implementation of circular economy principles. Our proposed storage circularity indicator promotes industrial collaboration, aligning with the concept of industrial symbiosis to optimise resource use and minimise waste generation. By discussing these topics, we aim to contribute to the advancement of more robust waste management strategies and policies that promote sustainable production and consumption practices.

Land-based plastic leakage into the aquatic environment from municipal solid waste - Waste flow diagram applied to Tuy Hoa City, Phu Yen, Vietnam.

Plastic mismanagement and its subsequent pollution by rapid economic development and urbanisation pose significant challenges for modern world society. Notwithstanding one of the main sources for macro plastic leakage into the ocean from land, precise assessment of plastic pollution origins from Southeast Asia is yet to be clearly examined. In order to make informed decisions and prioritise areas of improvement it is required to better understand the waste leakage dynamics at the local level. In this work, the Waste Flow Diagram (WFD) was applied to understand the sources and fates of plastics leaking from the solid waste management system for the case of Tuy Hoa City, Phu Yen, Vietnam. The study shows scenarios of leakage into the aquatic environment ranging from 0.8 to 2.7 kg/cap/year, which originates mainly from the collection system. Targeted improvements to this stage of the service could reduce leakages and the overall environmental impacts of mismanaged plastic waste. The results of this study show the necessity and importance of having up to date and reliable data to better inform stakeholders and service planning, facilitating efficient action against plastic pollution. As the first peer-reviewed scientific article critically applying the WFD, this work highlights the steps and challenges of the methodology and critically analyses different methodological pathways.

A study of indoor air pollution caused by disinfection equipment as a consequence of infectious waste management.

Infectious waste disinfection is an essential process in medical waste management that may cause release of some pollutants. In this study, the PAHs concentration at the disinfection was investigated. The change in the release rate of PAHs in two including infectious waste reduction and increasing the segregation ratio was estimated. The results showed that the PAHs concentration was 1172 - 2066 ng/m3. The specific concentration of PAHs was 852 ng/ton of infectious waste in average. The annual emission of the PAHs resulting from infectious waste disinfection is estimated to be 612.6 kg. Reduction of infectious waste caused by redefining infectious waste and increasing the segregation ratio leads to reduction of PAHs concentration by 50%. Increasing the ratio of segregation and redefinition of infectious waste that led to reduced waste loading volume are essential measures that reduce the emissions of pollutants as by-products of disinfection.

Potential of artificial soil preparation for vegetation restoration using red mud and phosphogypsum.

Red mud and phosphogypsum have long been a focus and challenge in global industrial waste management, and their low-cost and large-scale utilization technology has always been an urgent need. This study is based on the strong acid-base neutralization reaction between red mud and phosphogypsum, which contain an elemental composition similar to that of natural soil, red mud itself has characteristic of clay minerals, and other auxiliary materials (i.e. rice husk powder, bentonite, fly ash, polyacrylamide flocculant and microbial suspension) were added, so as to explore the potential of synergistically prepared artificial soil for vegetation restoration. The results showed that the artificial soils exhibited physicochemical characteristics (e.g., pH, moisture content, cation exchange capacity) similar to those of natural soil, along with abundant organic matter, nitrogen, phosphorus, and potassium contents, meeting the growth requirements of plants. The artificial soils were able to support favorable growth of suitable plants (e.g., sunflower, wheat, rye grass), accumulating high levels of diverse enzymatic activities, comparable to those in natural soils (e.g., catalase, urease, phosphatase), or even surpassing natural soils (e.g., sucrase), and rich microorganism communities, such as Cyanobacteria, Proteobacteria, Actinobacteria in the bacteria domain, and Ascomycota in the fungi domain, were initially developed. It's suggested that preparing 1 ton of artificial soil entails synergistic consumption of 613.7 kg of red mud and 244.6 kg of phosphogypsum, accounting for mass proportions of 61.4 % and 24.5 %, respectively. In future, more evaluations on the leaching loss of nutrients and alkalinity and the environmental risks of heavy metals should be conducted to more references for the artificial soil application. In summary, the preparation of artificial soil is a very simple, efficient, scalable and low-cost collaborative resource utilization scheme of red mud and phosphogypsum, which has great potential for vegetation restoration in some places such as tailings field and soil-deficient depression.

Enhancing trash classification in smart cities using federated deep learning.

Efficient Waste management plays a crucial role to ensure clean and green environment in the smart cities. This study investigates the critical role of efficient trash classification in achieving sustainable solid waste management within smart city environments. We conduct a comparative analysis of various trash classification methods utilizing deep learning models built on convolutional neural networks (CNNs). Leveraging the PyTorch open-source framework and the TrashBox dataset, we perform experiments involving ten unique deep neural network models. Our approach aims to maximize training accuracy. Through extensive experimentation, we observe the consistent superiority of the ResNext-101 model compared to others, achieving exceptional training, validation, and test accuracies. These findings illuminate the potential of CNN-based techniques in significantly advancing trash classification for optimized solid waste management within smart city initiatives. Lastly, this study presents a distributed framework based on federated learning that can be used to optimize the performance of a combination of CNN models for trash detection.

Exposure, knowledge, and perceptions of hazards associated with solid waste management at the household level in jigjiga town, northeast Ethiopia.

The goal of this study is to look into household exposure, knowledge, and perceptions of the risks connected with solid waste management in Jigjiga, Ethiopia. Jigjiga is currently grappling with overflowing landfills and limited waste collection, resulting in open dumping and serious health concerns such as disease transmission. The goal of this research is to better understand how Jigjiga residents interact with the waste management system, as well as their perceptions of the health and environmental issues that arise. The study employed a cross-sectional design using a multistage sampling technique. Two kebeles were used to select 200 families living near and far from the dumpsite. Questionnaires were utilized to collect data on demographics, exposure, knowledge, and risk perception. The analysis was carried out utilizing descriptive statistics and binary logistic regression. A survey of 357 households in Jigjiga, Ethiopia, found concerning trends in solid waste management. 78 % of the population visits the dumpsite on a weekly basis, with the majority residing within a 3-km radius. Almost half (44.5 %) reported monthly visits. Despite this, more than 90 % of locals are aware of the health dangers connected with poor waste management. 72 % of individuals believe that inadequate waste disposal causes to illness, with diarrhea being the most prevalent health concern. This study sheds light on the exposure, understanding, and perceptions of risks associated with solid waste management at the household level in Jigjiga, Ethiopia. The findings highlight the significance of improving solid waste management processes to mitigate the negative consequences on human health, the environment, and the economy.

Closing the nutrient cycle in urban areas: The use of municipal solid waste in peri-urban and urban agriculture.

Cities face the challenges of supplying food and managing organic municipal solid waste (OMSW) sustainably amid increasing urbanization rates. Urban agriculture (UA) can help with this effort by producing local crops that are fertilized with nutrients recovered from compost generated from OMSW. This research aims to determine the potential of OMSW compost to supply the nitrogen-phosphorus-potassium (NPK) demand of UA and the environmental benefits of replacing mineral fertilizer from a life cycle perspective. The Metropolitan Area of Barcelona (AMB) serves as the case study given its commitment to reuse biowaste according to the Revised Waste Framework Directive and to promote UA as a signing member of the Milan Urban Food Policy Pact. Based on crop requirements and farmer surveys, we find that the annual NPK demands of the agricultural fields of the AMB that cover 5,500 ha and produce 70,000 tons of crops are approximately 769, 113, and 592 tons of NPK, respectively. Spatial material flow analysis and life cycle assessment were applied to found that the current waste management system can potentially substitute 8 % of the total NPK demanded by UA with compost, reduce the impacts by up to 39 % and yield savings in global warming of 130 %. The more ambitious future scenario of 2025 can potentially substitute 21 % of the total NPK demand and reduce environmental impacts up to 1,049 %, depending on the category considered. Avoiding processing of mixed OMSW, mineral fertilizer replacement and cogeneration of electricity from biogas are the major contributors to these environmental savings.

Integrating fuzzy-AHP and GIS for solid waste disposal site selection in Kenitra province, NW Morocco.

Selecting an optimal solid waste disposal site is one of the decisive waste management issues because unsuitable sites cause serious environmental and public health problems. In Kenitra province, northwest Morocco, sustainable disposal sites have become a major challenge due to rapid urbanization and population growth. In addition, the existing disposal sites are traditional and inappropriate. The objective of this study is to suggest potential suitable disposal sites using fuzzy logic and analytical hierarchy process (fuzzy-AHP) method integrated with geographic information system (GIS) techniques. For this purpose, thirteen factors affecting the selection process were involved. The results showed that 5% of the studied area is considered extremely suitable and scattered in the central-eastern parts, while 9% is considered almost unsuitable and distributed in the northern and southern parts. Thereafter, these results were validated using the area under the curve (AUC) of the receiver operating characteristics (ROC). The AUC found was 57.1%, which is a moderate prediction's accuracy because the existing sites used in the validation's process were randomly selected. These results can assist relevant authorities and stakeholders for setting new solid waste disposal sites in Kenitra province.

Impacts of solid waste management site on some toxic elements contamination of the surrounding soil in Akure, Nigeria.

The distribution of potentially toxic elements (PTEs) such as zinc (Zn), copper (Cu), lead (Pb), nickel (Ni), cadmium (Cd), and chromium (Cr), their potential bioavailability, extent of contamination and potential risk of dumpsite and surrounding soil samples were appraised. Three (3) soil samples were collected randomly from within the dumpsite and three (3) soil samples were also obtained 50 m away from the perimeter fence of the dumpsite. PTEs in the bulk and fractionated portions were determined using inductively coupled plasma - optical emission spectrometry (ICP-OES). The results showed that the concentrations of all the PTEs analysed were higher in the dumpsite soil samples than the surrounding samples, suggesting an impact of the dumpsite activities on the soil. The distribution of PTEs varied significantly within the different fractions of both the surrounding and dumpsite soils and their presence were more of anthropogenic than geogenic. The calculated contamination factor/pollution load index (CF/PLI) revealed that the surrounding soil samples fell within the range of moderate contamination, except for Cu and Cr which showed very high contamination. Cd showed the highest value (60.4) for potential ecological risk index (PERI) at the surrounding area. However, the value of Cd in the surrounding soil samples indicated a low ecological risk. The total concentrations of the PTEs were lower than their corresponding target values for both national and international standards, except for Cd (0.15 mg/kg) and Cu (37.3 mg/kg). The study concluded that the dumping of various wastes at the dumpsite was found to be a contributing factor to PTEs contamination of soil at the study area. Hence, an engineered landfill for Akure metropolis is recommended to replace the existing practice.

Overview of waste bank application in Indonesian regencies.

Managing municipal solid waste (MSW) is a critical for Indonesia, as the country produces a substantial amount of waste annually. However, Indonesia's recycling rate remains limited, less than 25% of its waste, with the rest ending up in landfills. To address this, waste banks have emerged as a community-based solution to enhance MSW management through recycling. Although waste banks currently contribute only 7% to recyclable waste management, they hold promising potential, especially considering their close ties to households, the primary waste producers in Indonesia. Unfortunately, documentation of waste bank successes in Indonesian regencies is scarce, as most success stories are limited to major cities. This article conducts a literature review on waste bank implementations across various regencies, evaluating their accomplishments, obstacles and potential contributions to local MSW management. The review draws upon scholarly publications and various government reports, regulations and websites dedicated to updates on waste bank activities. Waste banks play a crucial role in enhancing environmental quality by promoting proper waste disposal and reducing landfill waste. They create economic opportunities, increasing income for both customers and administrators. Additional services, such as banking facilities encompassing savings, loans, daily necessities and bill payments, amplify their significance. To fully harness the potential of waste banks, support is imperative. Establishing adequate infrastructure and providing capacity-building for administrators are essential. Although regulatory frameworks offer opportunities, the impact of regency-level regulations on waste bank growth varies and necessitates further examination. Support mechanisms should be tailored to align with local characteristics and requirements.

Investigation of environmental and health impacts solid waste management problems and associated factors in Asella town, Ethiopia.

Solid wastes are substances thrown away by the institutions of individual households in the urban community. The solid waste management practice in Asella town was inappropriate caused environmental pollution and exposed different urban health difficulties. The main objective was to determine the environmental and health impacts of solid waste management problems and associated factors in Asella town. Data collection was carried out through a house-to-house community survey process with a method of cross-sectional study design. A total sample size of 418 households was selected and implemented a simple random and systematic probability sampling technique. The statistical analysis of the binary logistic regression model was used to perform the correlational test about health issues in Asella town. The environmental impact assessment indicators were 13.4% soil pollution, 31.6% air pollution, 20.8% environmental deterioration, and 34.2% water pollution. The health impact indicators were 49.5% respiratory diseases, 18.2% asthmatic (bronchitis) cases, 15.8% diarrheal diseases, 14.8% protozoan illnesses, and 1.7% cancer cases. The odds ratio of females AOR = 1.18; 95%, CI:0.48-2.89, educational districts of can't read and write AOR = 2.31: 95% CI = 0.48-11.1, primary cycle AOR = 2.32, 95% CI:0.58-9.21, Secondary cycle AOR = 2.19, 95% CI = 0.60-7.98, and tertiary cycle AOR = 4.98, 95% C1.06-23.46. the odds ratio of house ownership of government AOR = 2.95, 95% CI:0.54-16.14, private households AOR = 4.18, 95% CI:0.79-22.16 and rented house property AOR = 1.71, 95% CI:0.32-9.18. The odds ratio of income group of lower status AOR = 2.0, 95% CI:0.91-4.98, middle income AOR = 5.7, 95% CI: 0.73-44.53 and higher income AOR = 2.8, 95% CI:0.35-23.14. The odds ratio for sorting of solid waste AOR = 1.38, 95% CI:0.56-3.40, and reusing of solid waste AOR = 7.90, 95% CI:2.12-29.42. Thus, the odds ratio of reusing solid waste was statistically significant correlated factors that limit health issues in Asella town. Therefore, the inadequate solid waste management practice was a query for environmental and health impacts in Asella town. The principles of reusing, reducing, and recovering solid waste management practice must be supported by professional interventions and government policy.

"Measuring the health and fiscal outcomes of solid waste management operations by intergovernmental arrangements: The case of public consortia in Brazil".

This study estimates the health-related and public expenditure impacts of the solid waste services provided by public consortia in Brazilian Municipalities from the enactment of Public Consortia law (2005) to 2019. To conduct the analysis, we applied the econometric method of staggered difference-in-differences to publicly available datasets at the municipality level. The results show that the operation of solid waste services by public consortia had statistically significant effects in reducing hospitalizations caused by Schistosomiasis, Diarrhea/gastroenteritis (up to 5 years age) and other intestinal diseases. The results also indicate a positive impact on the reduction of environmental expenses in treated municipalities, supporting the idea that a Solid Waste Consortium can serve as a local coordinator and improve health and fiscal indicators simultaneously. The findings provide quantitative evidence that policymakers at the local and regional level can use to better understand the benefits of adhering to public consortia when preparing new investments and operation developments for this sector. This paper contributes to the literature of applied research in solid waste by shedding light on the underexplored theme of the intergovernmental cooperative arrangements, which can be instrumental in accelerating and enhancing the development of solid waste services.

New multi-source waste co-incineration and clustering park operating model for small- and medium-sized city: A case study in China.

With improvements in urban waste management to promote sustainable development, an increasing number of waste types need to be sorted and treated separately. Due to the relatively low amount of waste generated in small- and medium-sized cities, separate treatment facilities for each waste type lack scale, waste is treated at a high cost and low efficiency. Therefore, industrial symbiosis principles are suggested to be used to guide collaborative waste treatment system of multi-source solid wastes, and co-incineration is the most commonly used technology. Most existing studies have focused on co-incineration of one certain waste type (such as sludge or medical waste) with municipal solid waste (MSW), but the systematic design and the comprehensive benefits on a whole city and park level have not been widely studied. Taking the actual operation of a multi-source waste co-incineration park in south-central China as an example, this study conducted a detailed analysis of the waste-energy-water metabolism process of MSW, sludge, food waste, and medical waste co-incineration. The environmental and economic benefits were evaluated and compared with the single decentralized waste treatment mode. The results showed that the multi-source waste co-incineration and clustering park operating model was comprehensively superior to the single treatment mode, greenhouse gases and human toxicity indicators were decreased by 11.87% and 295.74%, respectively, and the internal rate of return of the project was increased by 29.35%. This mainly benefits from the synergy of technical system and the economies of scale. Finally, this research proposed policy suggestions from systematic planning and design, technical route selection, and an innovative management mode in view of the potential challenges.

Assessment of the performance of cruise ship waste management: Case study of the Rio de Janeiro port, Brazil.

The significant growth of the cruise ship industry has resulted in economic benefits, but there are also waste management-related challenges. The aim of this case study was to contribute to the research of cruise ship waste management at the Port of Rio de Janeiro. A3 methodology, applied for the first time in this context, was used to create questionnaires to assess the stakeholders involved, revealing that institutional bureaucracy has a negative effect on waste management. In addition, secondary data on unloaded waste, obtained from the transport manifests, showed that 56 % contained reliable information. The main wastes were plastics (57 %), glass (17 %), metal (9 %), and others. With respect to destinations, 41 % were sent to landfills, 55 % recycled and 4 % thermally treated. Only 5 % of cruise ship moorings removed waste at the Port of Rio de Janeiro, attributed to factors such as high costs.

Caste, mistrust and municipal inaction: The interwoven barriers for the integration of waste pickers in India.

Solid waste management in low- and middle-income countries like India faces significant challenges due to the increasing waste generation that surpasses the current capacity. Therefore, the informal waste sector (IWS) is more vital than ever in handling consumer waste alongside municipal solid waste management (SWM) systems. However, the integration of the IWS into formal waste management systems remains unresolved due to adverse social and economic conditions. This study focuses on identifying the root causes that hinder the integration of the IWS in India's waste management system, using the city of Chennai as a case study. Adopting an institutional perspective, we analyse the institutional landscape of the waste management system, considering both formal rules (in policy documents) and informal rules (i.e., social norms and routines). The institutional network analysis reveals a significant misalignment in perceptions among governance levels concerning the integration of the IWS. The study shows a considerable gap between rules-in-form and rules-in-use, leading to 1) Preclusion of waste pickers in collecting door-to-door source-segregated waste (i.e., recyclables). 2) Unfair pricing in transactions with small aggregators. 3) Lack of ID cards for waste pickers. These barriers are ultimately rooted in caste discrimination, misalignment between governance levels, and the exclusion of waste pickers in the policymaking process. In conclusion, understanding and rectifying the institutional gaps and discriminatory practices are essential steps towards effectively integrating the IWS in India's waste management system, promoting a more inclusive and sustainable approach to waste management.