Ising-like Model Hasn't Yet Said its Last Word: Exact and Mean-Field Investigations of 2, 3 and 4-Body Interactions in 1D Ising Chain of Binuclear Spin-Crossover Solids.

We investigate the static properties of a new class of 1D Ising-like Hamiltonian for binuclear spin-crossover materials accounting for two-, three-, and four-body short-range interactions between binuclear units of spins [[EQUATION]] and [[EQUATION]]. The following 2-, 3- , and 4-body [[EQUATION]], [[EQUATION]], and [[EQUATION]] terms are considered, in addition to intra-binuclear interactions, such as effective ligand-field energy and exchange-like coupling. An exact treatment is carried out within the frame of the transfer matrix method, leading to a [[EQUATION]] matrix from which, we obtained the thermal evolution of the thermodynamic quantities. Several situations of model parameter values were tested, among which that of competing intra- and inter-molecular interactions, leading to the occurrence of (i) one-step spin transition, (ii) two-, three-, and four-step transitions, obtained with a reasonable number of parameters. To reproduce first-order phase transitions, we accounted for inter-chains interactions, treated in the mean-field approach. Hysteretic multi-step transitions, recalling experimental observations, are then achieved. Overall, the present model not only suggests new landscapes of interaction configurations between SCO molecules but also opens new avenues to tackle the complex behaviors often observed in the properties of SCO materials.

Pressing of Functionalized Polymer Composite Materials to Improve Mössbauer Measurement Signals.

Coordination compounds, like iron(II) triazole complexes, exhibit spin crossover (SCO) behavior at around room temperature. Therefore, they are interesting for a variety of possible applications, and it is convenient to integrate them into polymers. Due to a reduction of the iron content and thus also 57Fe content in the sample through integration in polymers, Mössbauer measurements are only possible with greater difficulty or very long measurement times without expensive enrichment of the samples with 57Fe. So, other ways of improving the Mössbauer signal for these composite materials are necessary. Therefore, we pressed these composite materials to improve the Mössbauer spectra. In this study, we synthesized an iron(II) triazole spin crossover complex and an electrospun polymer complex composite nanofiber material including the same complex. For both products, Mössbauer measurements were performed at room temperature before and after using a press to show that the complex composite is not harmed through pressing. We investigate the influence of the pressing impact on the Mössbauer measurements in the context of measurement statistics and the measured signals. We show that pressing is not connected to any changes in the sample regarding the spin and oxidation state. We present that pressing improves the statistics of the Mössbauer measurements significantly. Furthermore, we use SEM measurements and PXRD to investigate whether or not the obtained fiber mats are destroyed in the pressing process.

High-performance Pyroelectric Property Accompanied by Spin Crossover in a Single Crystal of Fe(II) Complex.

Pyroelectric materials hold significant potential for energy harvesting, sensing, and imaging applications. However, achieving high-performance pyroelectricity across a wide temperature range near room temperature remains a significant challenge. Herein, we demonstrate a single crystal of Fe(II) spin-crossover compound shows remarkable pyroelectric properties accompanied by a thermally controlled spin transition. In this material, the uniaxial alignment of polar molecules results in a polarization of the lattice. As the molecular geometry is modulated during a gradual spin transition, the polar axis experiences a colossal thermal expansion with a coefficient of 796×10-6 K-1. Consequently, the material's polarization undergoes significant modulation as a secondary pyroelectric effect. The considerable shift in polarization (pyroelectric coefficient, p=3.7-22 nC K-1cm-2), coupled with a low dielectric constant (ϵ'=4.4-5.4) over a remarkably wide temperature range of 298 to 400 K, suggests this material is a high-performance pyroelectric. The demonstration of pyroelectricity combined with magnetic switching in this study will inspire further investigations in the field of molecular electronics and magnetism.

1- and 2-Tetrazolylacetonitrile as Versatile Ligands for Laser Ignitable Energetic Coordination Compounds.

1- and 2-Tetrazolylacetonitrile (1- and 2-TAN) have been synthesized by the reaction of chloroacetonitrile with 1H-tetrazole under basic conditions. They further were reacted with sodium azide in the presence of zinc(II) chloride to form 5-((1H-tetrazol-1-yl)methyl)-1H-tetrazole (1-HTMT) and 5-((2H-tetrazol-2-yl)methyl)-1H-tetrazole (2-HTMT). The nitrogen-rich compounds have been applied as ligands for Energetic Coordination Compounds (ECCs) and show interesting coordinative behavior due to different bridging modes. The structural variability of the compounds has been proved by low-temperature X-ray analysis. The ECCs were analyzed for their sensitivities to provide information about the safety of handling and their capability to serve as primary explosives in detonator setups to replace the commonly used lead styphnate and azide. All colored ECCs were evaluated for their ignitability by laser initiation in translucent polycarbonate primer caps. In addition, the spin-crossover characteristics of [Fe(1-TAN)6](ClO4)2 were highlighted by the measurement of the temperature-dependent susceptibility curve.

Iron-Catalyzed Allylic C(sp3)-H Silylation: Spin-Crossover-Efficiency-Determined Chemoselectivity.

The nuanced role of spin effects remains a critical gap in designing proficient open-shell catalysts. This study elucidates an iron-catalyzed allylic C(sp3)-H silylation/alkyne hydrosilylation reaction, in which the spin state of the open-shell iron catalyst dictates the reaction kinetics and pathway. Specifically, spin crossover led to alkyne hydrosilylation, whereas spin conservation resulted in a novel allylic C(sp3)-H silylation reaction. This chemoselectivity, governed by the spin-crossover efficiency, reveals an unexpected dimension in spin effects and a first in the realm of transition-metal-catalyzed in situ silylation of allylic C(sp3)-H bonds, which had been previously inhibited by the heightened reactivity of alkenes in hydrosilylation reactions. Furthermore, this spin crossover can either accelerate or hinder the reaction at different stages within a single catalytic reaction, a phenomenon scarcely documented. Moreover, we identify a substrate-assisted C-H activation mechanism, a departure from known ligand-assisted processes, offering a fresh perspective on C-H activation strategies.

Light-Controlled Multiconfigurational Conductance Switching in a Single 1D Metal-Organic Wire.

Precise control of multiple spin states on the atomic scale presents a promising avenue for designing and realizing magnetic switches. Despite substantial progress in recent decades, the challenge of achieving control over multiconfigurational reversible switches in low-dimensional nanostructures persists. Our work demonstrates multiple, fully reversible plasmon-driven spin-crossover switches in a single π-d metal-organic chain suspended between two electrodes. The plasmonic nanocavity stimulated by external visible light allows for reversible spin crossover between low- and high-spin states of different cobalt centers within the chain. We show that the distinct spin configurations remain stable for minutes under cryogenic conditions and can be nonperturbatively detected by conductance measurements. This multiconfigurational plasmon-driven spin-crossover demonstration extends the available toolset for designing optoelectrical molecular devices based on SCO compounds.

Sensing the Spin State of Room-Temperature Switchable Cyanometallate Frameworks with Nitrogen-Vacancy Centers in Nanodiamonds.

Room-temperature magnetically switchable materials play a vital role in current and upcoming quantum technologies, such as spintronics, molecular switches, and data storage devices. The increasing miniaturization of device architectures produces a need to develop analytical tools capable of precisely probing spin information at the single-particle level. In this work, we demonstrate a methodology using negatively charged nitrogen vacancies (NV-) in fluorescent nanodiamond (FND) particles to probe the magnetic switching of a spin crossover (SCO) metal-organic framework (MOF), [Fe(1,6-naphthyridine)2(Ag(CN)2)2] material (1), and a single-molecule photomagnet [X(18-crown-6)(H2O)3]Fe(CN)6·2H2O, where X = Eu and Dy (materials 2a and 2b, respectively), in response to heat, light, and electron beam exposure. We employ correlative light-electron microscopy using transmission electron microscopy (TEM) finder grids to accurately image and sense spin-spin interacting particles down to the single-particle level. We used surface-sensitive optically detected magnetic resonance (ODMR) and magnetic modulation (MM) of FND photoluminescence (PL) to sense spins to a distance of ca. 10-30 nm. We show that ODMR and MM sensing was not sensitive to the temperature-induced SCO of FeII in 1 as formation of paramagnetic FeIII through surface oxidation (detected by X-ray photoelectron spectroscopy) on heating obscured the signal of bulk SCO switching. We found that proximal FNDs could effectively sense the chemical transformations induced by the 200 keV electron beam in 1, namely, AgI → Ag0 and FeII → FeIII. However, transformations induced by the electron beam are irreversible as they substantially disrupt the structure of MOF particles. Finally, we demonstrate NV- sensing of reversible photomagnetic switching, FeIII + (18-crown-6) ⇆ FeII + (18-crown-6)+ •, triggered in 2a and 2b by 405 nm light. The photoredox process of 2a and 2b proved to be the best candidate for room-temperature single-particle magnetic switching utilizing FNDs as a sensor, which could have applications into next-generation quantum technologies.

Spin effect on redox acceleration and regioselectivity in Fe-catalyzed alkyne hydrosilylation.

Iron catalysts are ideal transition metal catalysts because of the Earths abundant, cheap, biocompatible features of iron salts. Iron catalysts often have unique open-shell structures that easily undergo spin crossover in chemical transformations, a feature rarely found in noble metal catalysts. Unfortunately, little is known currently about how the open-shell structure and spin crossover affect the reactivity and selectivity of iron catalysts, which makes the development of iron catalysts a low efficient trial-and-error program. In this paper, a combination of experiments and theoretical calculations revealed that the iron-catalyzed hydrosilylation of alkynes is typical spin-crossover catalysis. Deep insight into the electronic structures of a set of well-defined open-shell active formal Fe(0) catalysts revealed that the spin-delocalization between the iron center and the 1,10-phenanthroline ligand effectively regulates the iron center's spin and oxidation state to meet the opposite electrostatic requirements of oxidative addition and reductive elimination, respectively, and the spin crossover is essential for this electron transfer process. The triplet transition state was essential for achieving high regioselectivity through tuning the nonbonding interactions. These findings provide an important reference for understanding the effect of catalyst spin state on reaction. It is inspiring for the development of iron catalysts and other Earth-abundant metal catalysts, especially from the point of view of ligand development.

Extremely Slow Thermally-Induced Spin Crossover in the Two-Dimensional Network [Fe(bbtr)3 ](BF4 )2.

Cooling [Fe(bbtr)3 ](BF4 )2 (bbtr=1,4-di(1,2,3-triazol-1-yl)butane) triggers very slow spin crossover below 80 K (T1/2 ↓ =76 K). The spin crossover (SCO) is accompanied by a hysteresis loop (T1/2 ↑ =89 K). In contrast to isostructural perchlorate analogue [Fe(bbtr)3 ](ClO4 )2 in which spin crossover during cooling is preceded by phase transition at TPT =126 K in tetrafluoroborate phase transition does not occur to the beginning of spin crossover (80 K). Studies of mixed crystals [Fe(bbtr)3 ](BF4 )2(1-x) (ClO4 )2x (0.5≤x≤0.9) showed that a phase transition precedes spin crossover, however, for x≅0.46 intersection of T1/2 (x) and TPT (x) dependencies takes place. The application of pressure of 1 GPa shifts the spin crossover in [Fe(bbtr)3 ](BF4 )2 to a temperature above 270 K. High-pressure studies of neat tetrafluoroborate and perchlorate, as well as mixed crystals [Fe(bbtr)3 ](BF4 )2(1-x) (ClO4 )2x (0.1≤x≤0.9), revealed that at 295 K P1/2 value changes linearly with x indicating similar mechanism of spin crossover under elevated pressure in all systems under investigation. Variable pressure single crystal X-ray diffraction studies confirmed that in contrast to thermally induced spin crossover undergoing differently in tetrafluoroborate and perchlorate an application of high pressure removes this differentiation leading to a similar mechanism depending at first on start spin crossover and then P-3→P-1 phase transition occurs. In this report we have shown that 2D coordination polymer [Fe(bbtr)3 ](BF4 )2 (bbtr=1,4-di(1,2,3-triazol-1-yl)butane) treated to date as spin crossover silent shows thermally induced spin crossover phenomenon. Spin crossover in tetrafluoroborate is extremely slow. Determination of the spin crossover curve required carrying measurement in the settle mode-cooling from 85 to 70 K took about 600 h (average velocity of change of temperature ca. 0.0004 K/min).

Bistable Spin-Crossover Nanoparticles for Molecular Electronics.

The field of spin-crossover complexes is rapidly evolving from the study of the spin transition phenomenon to its exploitation in molecular electronics. Such spin transition is gradual in a single-molecule, while in bulk it can be abrupt, showing sometimes thermal hysteresis and thus a memory effect. A convenient way to keep this bistability while reducing the size of the spin-crossover material is to process it as nanoparticles (NPs). Here, the most recent advances in the chemical design of these NPs and their integration into electronic devices, paying particular attention to optimizing the switching ratio are reviewed. Then, integrating spin-crossover NPs over 2D materials is focused to improve the endurance, performance, and detection of the spin state in these hybrid devices.

A theory of the spin-crossover phenomena in the rare earth perovskite LaCoO3induced by temperature or a magnetic field.

Published magnetic data for LaCoO3are successfully analyzed with coexisting5Dand low-spin (LS) cobalt states. Energy levels of the two states are derived in analytic forms. To this end, fictitious orbital angular momentumlof magnitude one defines the Γ5(5D) state. Our Hamiltonian includes the spin-orbit interaction, and a cubic crystal field embellished by a trigonal distortion9B20(lz2-2/3)-80B40(lz2-9/10). A singlet ground state with an energy gap to the first excited doublet is realized for certain values of the parameters. The temperature-independent paramagnetic susceptibility (TIPS) of the5Dstate has a finite value, which accords with the observation. Whereas, TIPS is symmetry forbidden in the LS state. A rigorous calculation is made of the excitation spectrum in the LS state. The elementary excitation is modeled as a creation of an electron-hole pair that results in an energy level scheme in which the first excited quartet lies above the singlet ground state. The electron spin resonance data are successfully equated with transitions within the excited quartet. Available magnetization data delineate parameters in the5DHamiltonian. The temperature dependence of the susceptibility of our coexisting model is qualitatively reasonable. To improve on a quantitative outcome, we are led to introduce a temperature dependent concentration for the5Dand LS states. Calculated Bragg diffraction patterns gathered with x-rays tuned to the CoK-edge reveal potential to refine the current crystal structure and to shed light on the origin of the coexisting states.

Partial Methane Oxidation to Methanol on Ru-Porphyrins - on the Role of Non-Innocent Ligands and Spin Crossover.

The partial oxidation reaction of CH4 led to the formation of CH3 OH in the presence of Ru-porphyrin oxo complexes (denoted as POR, POR-O and POR-OH where in the case of the last two, oxygen atom and the OH group were attached to the active site, respectively), in which Ru was present on different oxidation states. The simulations were performed based on Density Functional Theory (DFT) with extended geometric and electronic structure analyses of each reaction step. Moreover, the reaction pathways were investigated in different spin states. The Spin Crossover (SCO) phenomenon was found to play an important role in the kinetics of the reaction in the presence of POR and POR-O. Harmonic Oscillator Model of Aromaticity (HOMA) index was applied for different spin states to estimate the aromaticity changes of the pyrrole rings in the Ru-porphyrin complexes. In order to characterize the nature of bonding, the Natural Bond Orbitals (NBO) analysis including the Wiberg Bond Index (WBI) and Natural Population Analysis (NPA) was carried out. Finally, the Non-Covalent Interactions (NCI) index was employed to gain insight into interactions between the components of the reaction. It was found that the non-covalent interactions cannot be neglected in the studied reaction paths.

Single-Crystal Transformation Engineering the Spin Change of Metal-Organic Frameworks via Cluster Deconstruction.

Spin crossover (SCO) materials with new architectures will expand and enrich the research in the SCO field. Here, we report two metal-organic frameworks (MOFs) containing tetradentate organic ligands and hexatopic linkers [Ag8 X8 (CN)6 ]6- (X=Br and I), which represents the first SCO MOF with clusters as building blocks. The silver halide cluster can be further removed after reacting with lithium tetracyanoquinodimethan (LiTCNQ). Such post-synthetic modification (PSM) is realized via single-crystal to single-crystal (SCSC) transformation from urk to nbo topology. Accordingly, the spin state and fluorescence properties are greatly modified by cluster deconstruction. Therefore, these achievements will provide new ideas for the design of new SCO systems and the development of PSM methods.

Ligand Modifications Produce Two-Step Magnetic Switching in a Cobalt(dioxolene) Complex.

Mononuclear monodioxolene valence tautomeric (VT) cobalt complexes typically exist in their low spin (l.s.) CoIII (cat2- ) and high spin (h.s.) CoII (sq⋅- ) forms (cat2- =catecholato, and sq⋅- =seminquinonato forms of 3,5-di-t Bu-1,2-dioxolene), which reversibly interconvert via temperature-dependent intramolecular electron transfer. Typically, the remaining four coordination sites on cobalt are supported by a tetradentate ligand whose properties influence the temperature at which VT occurs. We report that replacing one chelating pyridyl arm of tris(2-pyridylmethyl)amine (tpa) with a weaker field ortho-anisole moiety facilitates access to a third magnetic state, and examine a series of related complexes. Variable temperature crystallographic, magnetic, calorimetric, and spectroscopic studies support that this third state is consistent with l.s. CoII (sq⋅- ). Thus, our ligand modifications not only provide access to the VT transition from l.s. CoIII (cat2- ) to l.s. CoII (sq⋅- ), but at higher temperatures, the complex undergoes spin crossover from l.s. CoII (sq⋅- ) to h.s. CoII (sq⋅- ), representing the first example of two-step magnetic switching in a mononuclear monodioxolene cobalt complex. We hypothesize that ligand dynamicity may facilitate access to the rarely observed l.s. CoII (sq⋅- ) intermediate state, suggesting a new design criterion in the development of stimulus-responsive multi-state molecular switches.

Surface-Induced Electronic and Vibrational Level Shifting of [Fe(py)2bpym(NCS)2] on Al(100).

It is essential that one understands how the surface degrees of freedom influence molecular spin switching to successfully integrate spin crossover (SCO) molecules into devices. This study uses density functional theory calculations to investigate how spin state energetics and molecular vibrations change in a Fe(II) SCO compound named [Fe(py)2bpym(NCS)2] when deposited on an Al(100) surface. The calculations consider an environment-dependent U to assess the local Coulomb correlation of 3d electrons. The results show that the adsorption configurations heavily affect the spin state splitting, which increases by 10-40 kJmol-1 on the surface, and this is detrimental to spin conversion. This effect is due to the surface binding energy variation across the spin transition. The preference for the low-spin state originates partly from the strong correlation effect. Furthermore, the surface environment constrains the vibrational entropy difference, which decreases by 8-17 Jmol-1K-1 (at 300 K) and leads to higher critical temperatures. These results suggest that the electronic energy splitting and vibrational level shifting are suitable features for characterizing the spin transition process on surfaces, and they can provide access to high-throughput screening of spin crossover devices.

Hybrid Heterostructures of a Spin Crossover Coordination Polymer on MoS2 : Elucidating the Role of the 2D Substrate.

Controlling the deposition of spin-crossover (SCO) materials constitutes a crucial step for the integration of these bistable molecular systems in electronic devices. Moreover, the influence of functional surfaces, such as 2D materials, can be determinant on the properties of the deposited SCO film. In this work, ultrathin films of the SCO Hofmann-type coordination polymer [Fe(py)2 {Pt(CN)4 }] (py = pyridine) onto monolayers of 1T and 2H MoS2 polytypes are grown. The resulting hybrid heterostructures are characterized by GIXRD, XAS, XPS, and EXAFS to get information on the structure and the specific interactions generated at the interface, as well as on the spin transition. The use of a layer-by-layer results in SCO/2D heterostructures, with crystalline and well-oriented [Fe(py)2 {Pt(CN)4 }]. Unlike with conventional Au or SiO2 substrates, no intermediate self-assembled monolayer is required, thanks to the surface S atoms. Furthermore, it is observed that the higher presence of Fe3+ in the 2H heterostructures hinders an effective spin transition for [Fe(py)2 {Pt(CN)4 }] films thinner than 8 nm. Remarkably, when using 1T MoS2 , this transition is preserved in films as thin as 4 nm, due to the reducing character of this metallic substrate. These results highlight the active role that 2D materials play as substrates in hybrid molecular/2D heterostructures.

Observation of Two-Step Spin Transition in Graphene Oxide-Based Hybrids with Iron(II) 4-amino-1,2,4-triazole Spin Crossover Nanoparticles.

A novel experimental protocol based on a reverse micellar method is presented for the synthesis of graphene oxide (GO)-based hybrids with spin crossover nanoparticles (SCO NPs) of the 1D iron(II) coordination polymer with the formula [Fe(NH2trz)3](Br2). By introducing different quantities of 0.5% and 1.0% of GO (according to iron(II)) into the aqueous phase, two hybrids, NP4 and NP5, were synthesized, respectively. The morphological homogeneity of the NPs on the surface of the GO flakes is greatly improved in comparison to the pristine [Fe(NH2trz)3](Br2) NPs. From the magnetic point of view and at a low magnetic sweep rate of 1 K/min, a two-step hysteretic behavior is observed for NP4 and NP5, where the onset of the low-temperature second step appeared at 40% and 30% of the HS fraction, respectively. For faster sweep rates of 5-10 K/min, the two steps from the cooling branch are progressively smeared out, and the critical temperatures observed are T1/2↑ = 343 K and T1/2↓ = 288 K, with a thermal width of 55 K for both NP4 and NP5. A Raman laser power-assisted protocol was used to monitor the thermal tolerance of the hybrids, while XPS analysis revealed electronic interactions between the SCO NPs and the GO flakes.

Interpenetration Phenomena via Anion Template Effects in Fe(II) and Co(II) Coordination Networks with a Bis-(1,2,4-triazole) Ligand.

Seven new coordination networks, [Fe(tbbt)3](BF4)2 (1), [Co(tbbt)3](BF4)2 (2), [Fe(tbbt)3](ClO4)2 (3), [Co(tbbt)3](ClO4)2 (4), [Fe(NCS)2(tbbt)2] (5), [Co(NCS)2(tbbt)2] (6), and [Fe(H2O)2(tbbt)2]Br2·2H2O (7), were synthesized with the linker 1,1'-(trans-2-butene-1,4-diyl)bis-1,2,4-triazole (tbbt) and structurally investigated. The structure of complexes 1-4 is composed of three interpenetrating, symmetry-related 3D networks. Each individual 3D network forms a primitive, nearly cubic lattice (pcu) with BF4- or ClO4- anions present in the interstitial spaces. The structure of compounds 5 and 6 is composed of two-dimensional sql layers, which are parallel to each other in the AB stacking type. These layers are interpenetrated by one-dimensional chains, both having the same formula unit, [M(NCS)2(tbbt)2] (M = Fe, Co). The structure of compound 7 consists of parallel, two-dimensional sql layers in the ABCD stacking type. The interpenetration in 1-6 is not controlled by π-π-interactions between the triazole rings or C=C bonds, as could have been expected, but by (triazole)C-H⋯F4B, C-H⋯O4Cl, and C-H⋯SCN anion hydrogen bonds, which suggests a template effect of the respective non-coordinated or coordinated anion for the interpenetration. In 7, the (triazole)C-H⋯Br anion interactions are supplemented by O-H⋯O and O-H⋯Br hydrogen bonds involving the aqua ligand and crystal water molecules. It is evident that the coordinated and non-coordinated anions play an essential role in the formation of the networks and guide the interpenetration. All iron(II) coordination networks are colorless, off-white to yellow-orange, and have the metal ions in the high-spin state down to 77 K. Compound 5 stays in the high spin state even at temperatures down to 10 K.

BEG spin-1 model with random exchange magnetic interactions for spin-crossover solids.

We have investigated magnetic phase diagrams of spin-crossover (SCO) solids throughout the Blume-Emery-Griffiths spin-1 model where the spin states ±1 and 0 are associated to high-spin state and low-spin states respectively. In the present work, the quadrupolar interaction,K, parameter depends linearly on temperature and accounts for the role of the lattice phonons in the elastic interactions between the SCO units. Magnetic interactions are randomly distributed in the system and are controlled by a factorγ=Jij/Ksuch that forγ = 0 (Jij=0), magnetic ordering is not expected. The crystal-field that acts on SCO sites depends both on the ligand-field strength and the degeneracy ratio between HS and LS states as in some previous works. The system is also under the effect of a random local magnetic fieldhiacting on each sitei. The model is solved using a homogeneous mean field theory. Our investigations reveal the occurrence of thermally-induced gradual, and first-order spin-transitions by varying the model parameters. At vicinity of first-order transition, various types of isothermal magnetic hysteresis loops are obtained and their corresponding coercive field and loop patterns are discussed as function of temperature.

Structural insight into the cooperativity of spin crossover compounds.

Spin-crossover (SCO) compounds are promising materials for a wide variety of industrial applications. However, the fundamental understanding of their nature of transition and its effect on the physical properties are still being fervently explored; the microscopic knowledge of their transition is essential for tailoring their properties. Here an attempt is made to correlate the changes in macroscopic physical properties with microscopic structural changes in the orthorhombic and monoclinic polymorphs of the SCO compound Fe(PM-Bia)2(NCS)2 (PM = N-2'-pyridylmethylene and Bia = 4-aminobiphenyl) by employing single-crystal X-ray diffraction, magnetization and DSC measurements. The dependence of macroscopic properties on cooperativity, highlighting the role of hydrogen bonding, π-π and van der Waals interactions is discussed. Values of entropy, enthalpy and cooperativity are calculated numerically based on the Slichter-Drickamer model. The particle size dependence of the magnetic properties is probed along with the thermal exchange and the kinetic behavior of the two polymorphs based on the dependence of magnetization on temperature scan rate and a theoretical model is proposed for the calculation of the non-equilibrium spin-phase fraction. Also a scan-rate-dependent two-step behavior observed for the orthorhombic polymorph, which is absent for the monoclinic polymorph, is reported. Moreover, it is found that the radiation dose from synchrotron radiation affects the spin-crossover process and shifts the transition region to lower temperatures, implying that the spin crossover can be tuned with radiation damage.