RESUMEN
This research was designed to isolate the predominant L-asparaginase-producing fungus from rhizosphere soil of tapioca field and assess the suitable growth conditions required to produce maximum L-asparaginase activity. The Aspergillus tubingensis was identified as a predominant L-asparaginase producing fungal isolate from 15 isolates, and it was characterized by 18S rRNA sequencing. The L-asparaginase-producing activity was confirmed by pink color zone formation around the colonies in modified Czapek Dox agar plate supplemented with 1% L-Asparagine. The optimal growth conditions required for the L-asparaginase production by A. tubingensis were optimized as pH 6.0, temperature 30 °C, glucose as carbon source, 1.5% of L-Asparagine, ammonium sulphate as nitrogen source, rice husk as natural L-Asparagine enriched source, and 8 days of the incubation period. The L-Asparaginase activity from A. tubingensis was excellent under these optimal growth conditions. It significantly used rice husk as an alternative to synthetic L-Asparagine. As a result, this may be considered a sustainable method of converting organic waste into valuable raw material for microbial enzyme production.
RESUMEN
This study investigated the gelling properties, rheological behaviour, and microstructure of heat-induced, low-salt myofibrillar protein (MP) gels containing different levels (2%, 4%, 6%, and 8%, w/w) of cross-linked (CTS) or acetylated (ATS) tapioca starch. The results indicated that either CTS or ATS significantly enhanced the gel strength and water-holding capacity of low-salt MP gels (P < 0.05), an outcome verified by the rheological behaviour test results under different modes. Furthermore, iodine-staining images indicated that the MP-dominated continuous phase gradually transited to a starch-dominated phase with increasing CTS or ATS levels, and 4% was the critical point for this phase transition. In addition, hydrophobic interactions and disulphide bonds constituted the major intermolecular forces of low-salt MP gels, effectively promoting phase transition. In brief, modified tapioca starches possess considerable potential application value in low-salt meat products.
Asunto(s)
Geles , Manihot , Transición de Fase , Reología , Almidón , Geles/química , Almidón/química , Manihot/química , Animales , Productos de la Carne/análisis , Acetilación , Proteínas Musculares/química , Miofibrillas/químicaRESUMEN
Heavy metal pollution in soil has emerged as a major environmental concern. This can be attributed to human activities such as mining, modern agriculture, and industrialization. This study was conducted to determine how heavy metals spread from mine tailings to surrounding farmland. Metal absorption and accumulation were also investigated in the root and shoot biomass of tapioca crops grown in those farmlands. Metal concentrations in MTAS1 were 85.3 ± 1.2, 45.8 ± 1.5, 134.8 ± 1.7, 92.4 ± 2.2, and 78.95 ± 1.4 mg kg-1, respectively. Heavy metal concentrations in MTAS2 and MTAS3 were found to be 79.62 ± 1.6, 75.4 ± 1.5, 41.31 ± 1.1, 47.8 ± 1.6, 142.5 ± 2.1, 128.4 ± 1.4, 86.2 ± 1.9, 79.5 ± 1.3, and 83.4 ± 1.2 mg kg-1, respectively. Tapioca crop shoot and root biomass grown at these metal polluted sites absorbed and accumulated significant amounts of Cd, Cu, Zn, Pb, Ni, and Mn. Notably, the metal content of the tapioca crop's root and shoot biomass exceeded national standards.
Asunto(s)
Biomasa , Metales Pesados , Minería , Raíces de Plantas , Brotes de la Planta , Contaminantes del Suelo , Metales Pesados/análisis , Metales Pesados/metabolismo , Contaminantes del Suelo/análisis , Contaminantes del Suelo/metabolismo , Raíces de Plantas/metabolismo , Raíces de Plantas/crecimiento & desarrollo , Brotes de la Planta/metabolismo , Brotes de la Planta/crecimiento & desarrollo , Manihot/crecimiento & desarrollo , Manihot/metabolismo , Manihot/química , Agricultura/métodos , Monitoreo del AmbienteRESUMEN
Bionanocomposites offer a promising solution to the plastic waste crisis. Although tapioca starch shows potential as a bioplastic material, it is characterized by low mechanical properties, poor thermal stability, and high water absorption owing to its hydrophilic nature. To increase the flexibility of the material and reduce the transmission rate of oxygen and water vapor, additives such as fructose and titanium dioxide (TiO2) can be incorporated into the material. TiO2 nanoparticles are commonly utilized in agriculture to enhance nutrient release and promote plant growth. In this study, X-ray diffraction analysis revealed that TiO2 reduced crystal size while increasing the crystallinity of bionanocomposites. Fourier-transform infrared spectroscopy analysis revealed an absorption peak at 3397 cm-1, indicating hydrogen bonding between TiO2 and starch-OH groups, and a peak at 773 cm-1, indicating an increase in the intensity of Ti-O-Ti stretching vibrations with the incorporation of TiO2. Water absorption rate results confirmed that TiO2 addition enhanced bionanocomposite resistance to water vapor and moisture, evidenced by increased tensile strength from 0.11 to 0.49 MPa and Young's modulus from 2.48 to 5.26 MPa, as well as decreased elongation at break from 21.46 % to 2.36 % in bionanocomposites with TiO2. Furthermore, with TiO2 addition, the biodegradation rate of the bionanocomposites decreased, which is beneficial for enhancing plant nutrient content.
Asunto(s)
Embalaje de Alimentos , Fructosa , Manihot , Nanocompuestos , Almidón , Titanio , Nanocompuestos/química , Titanio/química , Almidón/química , Embalaje de Alimentos/métodos , Fructosa/química , Manihot/química , Fertilizantes , Resistencia a la Tracción , Agua/química , Difracción de Rayos X , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
The vibrating superfine mill (VSM) is a machine that belongs to the micronization technique. In this study, VSM was employed to produce micronized tapioca starch by varying micronization times (15, 30, 45, and 60 min). The structural and physicochemical properties of the micronized starch were then examined. Scanning electron microscopy studies revealed that micronized starch was partially gelatinized, and the granule size dramatically increased when micronization time increased. X-ray diffraction patterns showed that the relative crystallinity was decreased from 24.67% (native) to 4.13% after micronization treatment for 15 min and slightly decreased after that. The solubility of micronized starch significantly increased as the micronization time increased, which was associated with the destruction of the starch crystalline structure. Differential scanning calorimetry investigations confirmed that micronized starch was "partly gelatinized," and the degree of gelatinization increased to 81.27% when the micronization time was 60 min. The weight-average molar mass was reduced by 15.0% (15 min), 30.9% (30 min), 55.7% (45 min), and 70.5% (60 min), respectively, indicating that the molecular structure was seriously degraded. The results demonstrated that the physicochemical changes of micronized starch granules were related to the destruction of the starch structure. These observations would provide details on micronized starch and its potential applications. PRACTICAL APPLICATION: These observations would provide details on micronized starch and its potential applications. Moreover, we believe that when the structures of starches were known, it is probable that the effect of VSM on the structural and physicochemical properties change of other starches might be predicted by adjusting the processing time.
Asunto(s)
Rastreo Diferencial de Calorimetría , Manihot , Microscopía Electrónica de Rastreo , Solubilidad , Almidón , Difracción de Rayos X , Almidón/química , Manihot/química , Microscopía Electrónica de Rastreo/métodos , Gelatina/química , Tamaño de la Partícula , Manipulación de Alimentos/métodos , Fenómenos QuímicosRESUMEN
BACKGROUND: Industrial starch hydrolysis allows the production of syrups with varying functionality depending on their Brix value and dextrose equivalent (DE). As the current methods for evaluating these products are labor-intensive and time-consuming, the objective of this study was to investigate the potential of near-infrared (NIR) spectroscopy for classifying the different tapioca starch hydrolysis products. RESULTS: NIR spectra of samples of seven products (n = 410) were recorded in transflectance mode in the 12 000-4000 cm-1 range. Next, orthogonal partial least squares (OPLS) regression models were built to predict the Brix and DE values of the different samples. To classify the different starch hydrolysis products, support vector machines (SVM) were trained using either the raw spectra or latent variables (LVs) obtained from the OPLS models. The best classification accuracy was obtained by the SVM classifier based on the LVs from the OPLS model for DE prediction, resulting in 95% correct classification over all classes. CONCLUSION: These results show the potential of NIR spectroscopy for classifying tapioca starch hydrolysis products with respect to their functional properties related to the Brix and DE values. © 2024 Society of Chemical Industry.
Asunto(s)
Glucosa , Manihot , Espectroscopía Infrarroja Corta , Almidón , Almidón/química , Manihot/química , Espectroscopía Infrarroja Corta/métodos , Hidrólisis , Glucosa/química , Glucosa/análisis , Máquina de Vectores de SoporteRESUMEN
Fresh highland barley is difficult to store, leading to a lack of commercial products. To address these problems, the research investigated the effect of different heat treatments (steaming
RESUMEN
To effectively remove tannic acid (TA) from wastewater, using green and natural materials has attracted increasing attention. Inspired by Galla Chinensis (GC) with high content of TA, this study synthesized a biomimetic porous adsorbent to mimic the GC structure using dialdehyde tapioca starch (DTS) and gelatin (GL). The TA adsorption performance and mechanism of synthetic porous material were investigated. Results revealed that the porous material exhibited a maximum TA adsorption capacity of 1072.01 mg/g, along with a high removal rate of 95.16% under the conditions of a DTS-GL mass ratio of 1:1, DTS aldehyde content of 48.16%, a solid content of 5%, and a pH of 2 at 25 °C. The adsorption of TA by DTS was not affected by water-soluble cationic and anion. The adsorption kinetics of TA on the porous material followed the pseudo-second-order model, and this Langmuir adsorption model (R2 = 0.9954) which were well described the adsorption of TA by the material, indicating that the adsorption primarily occurred in a monolayer. FTIR, XRD, DSC, TG, XPS, and SEM-EDS were employed to characterize the structure characteristics of the porous material. The cross-linking between DTS and GL by Schiff base reaction imparted a chemical structure could absorb TA by hydrogen bonding. The TA desorption rates of in 30% acetone and 40% ethanol solutions were 88.76% and 91.03%, respectively. The porous material prepared by the GC-inspired approach holds promise as an ideal choice for loading polyphenolic compounds and provides a new perspective for the design and application of bioinspired engineering materials.
Asunto(s)
Materiales Biomiméticos , Taninos , Aguas Residuales , Contaminantes Químicos del Agua , Taninos/química , Aguas Residuales/química , Adsorción , Contaminantes Químicos del Agua/química , Contaminantes Químicos del Agua/análisis , Porosidad , Materiales Biomiméticos/química , Gelatina/química , Purificación del Agua/métodos , Manihot/química , Eliminación de Residuos Líquidos/métodos , CinéticaRESUMEN
The gel prepared using Nemipterus virgatus (N. virgatus) surimi alone still has some defects in texture and taste. Complexing with polysaccharides is an efficient strategy to enhance its gel properties. The main objective of this study was to analyze the relationship between the gel quality and molecular interaction of N. virgatus surimi gel after complexing with tapioca starch. The results make clear that the gel strength, hardness, and chewiness of surimi gel were increased by molecular interaction with tapioca starch. At the appropriate addition amount (12%, w/w), the surimi gel had an excellent gel strength (17.48 N), water-holding capacity (WHC) (89.01%), lower cooking loss rate (CLR) (0.95%), and shortened T2 relaxation time. Microstructure analysis indicated that the addition of tapioca starch facilitated even distribution in the gel network structure, resulting in a significant reduction in cavity diameter, with the minimum diameter reduced to 20.33 µm. In addition, tapioca starch enhanced the hydrogen bonding and hydrophobic interaction in the gel system and promoted the transformation of α-helix to ß-sheet (p < 0.05). Correlation analysis showed that the increased physicochemical properties of surimi gel were closely related to the enhanced noncovalent interactions. In conclusion, noncovalent complexation with tapioca starch is an efficient strategy to enhance the quality of surimi gel.
RESUMEN
Thermoplastic starch (TPS) is considered as alternative material for substitute petroleum-based materials for single-use packaging material applications. The main weakness of TPS is sensitive to water and humidity which causes low mechanical properties and low thermal resistance. To address this limitation, one can enhance the strength is by incorporating cellulose nanofiber as a reinforcing agent. Cellulose nanofiber used in this study is bacterial cellulose, synthesized from tapioca liquid waste media, namely Nata de Cassava (NDCass). The effect of NDCass addition to TPS on chemical characteristics, physical properties, crystallinity, mechanical properties, and thermal properties was investigated. As the results, NDCass incorporation has no significant effect on the chemical structure and crystal structure of composites as observed by FTIR and XRD analysis. Incorporating of NDCass improved the mechanical properties by 37.3 %, the thermal stability, and the viscosity, however reduced the elongation at break by 65.6 %, the density, the melt flow and shear rate of TPS biocomposite. This study evidently that starch from Arenga pinnata trunk and bacterial cellulose from tapioca liquid waste can be manufactured into biocomposites using in-situ twin screw extrusion which beneficial for large-scale applications.
Asunto(s)
Celulosa , Nanofibras , Celulosa/química , Almidón/química , Nanofibras/química , Agua/químicaRESUMEN
This study investigated the effects of radio frequency air cold plasma (RFACP) pretreatment on the multi-scale structures, physicochemical properties, enzymatic hydrolysis, and hydroxypropylation of tapioca starch. The results showed that cold plasma (CP) made starch granules rough on the surface and disrupted long- and short-range ordered structures, reducing relative crystallinity from 43.8 % to 37.4 % and R1047/1022 value from 0.992 to 0.934. Meanwhile, the starch molecules were depolymerized and oxidized by CP, reducing weight-average molecular weight from 9.64 × 107 to 2.17 × 107 g/mol, while increasing carbonyl and carboxyl groups by up to 118 % and 53 %. Additionally, CP-treated starches exhibited higher solubility and swelling power, along with lower gelatinization enthalpy. Short-time CP pretreatment (10 min) promoted the hydroxypropylation of starch and increased the molar substitution (0.081-0.112). Also, CP pretreatment accelerated enzymatic hydrolysis of starch, as indicated by the increase in hydrolysis rate (1.846 × 10-3-2.033 × 10-3 min-1) and degree of hydrolysis (51.45 % - 59.92 %). Overall, the multi-scale structural disruption induced by CP treatment facilitated the accessibility of enzymes/chemical reagents into starch granules and glucan chains. This study suggested that RFACP could be used for starch pretreatment to increase production efficiency in modified starch production, as well as in brewing and fermentation industries.
Asunto(s)
Manihot , Gases em Plasma , Hidrólisis , Almidón/química , Solubilidad , AmilosaRESUMEN
The sol-gel behavior of tapioca starch (TS) plays a crucial role in the processing and quality control of flour-based products. However, natural tapioca starch has low gel strength and poor viscosity, which tremendously limits its application. To solve this problem, this study investigated the effects of κ-carrageenan (KC), konjac gum (KGM), and Mesona chinensis Benth polysaccharide (MCP) on the pasting behavior, rheological, and structural properties of tapioca starch. KC, KGM, and MCP significantly increased the viscosity of TS. With the exception of high-concentration KGM (0.5 %), all other blending systems showed decrease in setback. This may be attributed to the stronger effect of the high-concentration KC (0.5 %) and MCP (0.5 %) functional groups interacting with starch. KC, KGM, and MCP effectively improved the dynamic modulus (G' and G") of TS gel and were effective in increasing the gel strength and hardness of TS. The FT-IR analysis indicated that the short-range order of TS was mainly influenced by polysaccharides through non-covalent bonding interactions. Furthermore, it was confirmed that three polysaccharides could form dense structures by hydrogen bonding with TS. Similarly, more stable structure and pore size were observed in the microstructure diagram.
Asunto(s)
Lamiaceae , Manihot , Espectroscopía Infrarroja por Transformada de Fourier , Polisacáridos/química , Almidón/química , Carragenina/química , Reología , Lamiaceae/química , Viscosidad , Geles/químicaRESUMEN
AIM: To evaluate the effect of different wall material (WM) matrices followed by homogenisation to encapsulate chia seed oil (CSO) using freeze drying technology. METHODS: CSO was encapsulated using three ratios (100/0, 50/50, and 100/0) of two WM matrices: MTS/WPC (modified tapioca starch-whey protein concentrate) and MD/WPC (maltodextrin-whey protein concentrate). The evaluation included encapsulation efficiency (EE), oxidative stability, and α-linolenic acid (ALA) retention. Homogenised microcapsules (-H) were then assessed for storage and thermal stability, along with cumulative oil release. RESULTS: The MD-WPC-H 50/50 microcapsules had superior EE (97.32%), higher ALA retention (60.2%), storage stability (up to 30 days), higher thermal stability (up to 700 °C), and desirable oil release in simulated condition. CONCLUSION: Selecting suitable WM and homogenisation is key for improving EE, storage, thermal stability, and targeted release. The CSO microcapsule can serve as a functional ingredient to improve the quality of diverse food products.
Asunto(s)
Salvia , Cápsulas , Proteína de Suero de Leche , Oxidación-ReducciónRESUMEN
Modified starch is increasingly applied in the meat industry as an effective functional ingredient to provide meat products with the desired textural properties and appearance. This study aimed to investigate the effects of incorporating tapioca acetylated distarch phosphate (TADSP) or corn acetylated distarch phosphate (CADSP) on the gel properties and in vitro digestibility of Chinese-style meatballs known as kung-wan. The results showed that TADSP and CADSP significantly enhanced the textural properties of kung-wan in a dose-dependent manner (P < 0.05), as well as enhanced the rheological behavior of meat batters. TADSP resulted in a denser meat protein gel network compared to CADSP, primarily because the lower pasting temperature of TADSP made it gelatinize earlier and more completely during heating than CADSP and subsequently filled in the meat protein gel network. The intermolecular forces observed in kung-wan with TADSP or CADSP were hydrogen bonds and hydrophobic interactions. Furthermore, the protein digestibility of kung-wan was increased with higher levels of TADSP and CADSP (P < 0.05). Notably, kung-wan with TADSP exhibited significantly higher protein digestibility than those with CADSP at the same level (P < 0.05). Our results offer valuable insights into the potential application of acetylated distarch phosphate in kung-wan.
Asunto(s)
Manihot , Zea mays/química , Interacciones Hidrofóbicas e Hidrofílicas , Proteínas de la Carne , Fosfatos/química , Almidón/químicaRESUMEN
The objectives of this research were to (1) determine the feed intake, digestibility, and energy utilization and (2) estimate the net energy value of cassava chips consumed by lactating dairy cows. Four multiparous Holstein-Friesian crossbred cows at 139 ± 33 (mean ± SD) day in milk were assigned according to a 4 × 4 Latin square design with four periods. The four treatments included a diet substituted with cassava chips on a 0%, 12%, 24%, and 36% dry matter (DM) basis in the basal diet. Indirect calorimetry with a head cage respiration system was used to determine nutrient and energy utilization. Increasing the number of cassava chips in the diet resulted in a linear increase (p < 0.05) in nutrient intake and digestibility but a linear decrease (p < 0.01) in crude protein (CP) and fiber. The enteric methane yield and intensity were not affected (p > 0.05), while energy was lost as feces and urine reduced linearly (p < 0.05). Milk yield and milk composition (protein, fat, lactose) also increased linearly (p < 0.05). The net energy requirement for the maintenance of the lactating cows was estimated as 327 kJ/kg of metabolic body weight, and the efficiency of metabolizable energy used for lactation was 0.66. The estimated net energy value of cassava chips for lactation was 8.03 MJ/kg DM.
RESUMEN
The effects and mechanism of incorporation of cross-linked tapioca starch (CTS) or acetylated tapioca starch (ATS) on the gel properties and in vitro digestibility of kung-wan (a Chinese-style meatball) were evaluated. The results indicated that incorporation of either CTS or ATS significantly enhanced the gel properties of kung-wan in a dose-dependent manner (P < 0.05), as well as the rheological properties of meat batter. Moreover, hydrogen bonds and electrostatic interaction were the major intermolecular forces in kung-wan when incorporated with CTS or ATS. Meanwhile, CTS and ATS acted as fillers in the meat protein gel matrix, which was further verified by the microstructure of kung-wan. However, CTS produced a more uniform and dense meat protein gel network than ATS, which was mainly due to its limited swelling characteristics. In addition, the incorporation of CTS or ATS significantly increased the in vitro digestibility of protein in kung-wan with increasing level of addition (P < 0.05). However, no significant differences in protein digestibility were detected between the CTS and ATS groups at the same addition level (P > 0.05). Our results provided some critical points for the actual application of modified tapioca starch to promote the quality profiles of kung-wan.
Asunto(s)
Manihot , Almidón , Almidón/química , Manihot/química , Manihot/metabolismo , Proteínas de la CarneRESUMEN
White salted (udon) noodles are one of the major staple foods in Asian countries, particularly in Japan. Noodle manufacturers prefer the Australian noodle wheat (ANW) varieties to produce high-quality udon noodles. However, the production of this variety has reduced significantly in recent years, thus affecting the Japanese noodle market. Noodle manufacturers often add tapioca starch to compensate for the flour scarcity; however, the noodle-eating quality and texture are significantly reduced. This study, therefore, investigated the effect of the addition of porous tapioca starch on the cooking quality and texture of udon noodles. For this, tapioca starch was initially subjected to enzyme treatment, ultrasonication, and a combination of both to produce a porous starch where a combined enzyme (0.4% alpha amylase)-ultrasound treatment (20 kHz) yielded a porous starch with increased specific surface area and better absorbent properties which are ideal for udon noodle manufacturing, Later, udon noodles were prepared using three varieties of ANW, a hard Mace variety, and commercial wheat flour by incorporating the prepared porous tapioca starch at a concentration of 5% and 10% of dry ingredients. Adding this porous starch resulted in a lower cooking time with higher water absorption and desirable lower cooking loss compared to the control sample with 5% of the porous starch chosen as the optimum formulation. Increasing the level of the porous starch reduced the hardness of the noodles whilst maintaining the desired instrumental texture. Additionally, a multivariate analysis indicated a good correlation between responses' optimum cooking time and water absorption capacity as well as turbidity and cooking loss, and a cluster analysis grouped noodle samples prepared from different varieties into the same clusters based on the porous starch added, indicating the possibility of different market strategies to improve the quality of the udon noodles produced from different wheat varieties.
RESUMEN
Aiming at the high-concentration dust pollution in open-pit coal mines, a foam dust suppressant with low viscosity and consolidated coal dust is developed. In order to reduce the limited effect of binder viscosity on the foaming ability and wettability of foam, tapioca starch is oxidized with Cu2+/H2O2 System in this study to reduce the molecular weight of the polymer and prepare materials with high consolidation and low viscosity. The dust suppression performance of the sample is measured, and the microscopic adsorption mechanism of the dust suppressant is investigated by molecular dynamics simulation. The results show that the oxidized starch adhesive solution consists of 20 g tapioca starch, 0.88 ml hydrogen peroxide, 2.4 g sodium hydroxide, and 0.48 g copper sulfate, which need to be diluted to 10 times the original volume, and 1 g of surfactant (sodium fatty alcohol polyoxyethylene ether sulfate/alkyl Glycoside=1:4) is added to prepare a new foam dust suppressant. The viscosity is 2.6 mPa·s, the foaming multiple is 6.25, the contact angle is 13.73° at the first second, the hardness reaches 70.75 HA, and a dust suppression rate of 98.17% for PM10. The dust suppressant can effectively suppress coal dust.
RESUMEN
This study aimed at the composition of active packaging film from tapioca starch/pectin (TSP) incorporated with broccoli leaf polyphenols (BLP) was prepared and applied to improve the qualities of the chilled mutton during storage. The results indicated the addition of BLP significantly improved the thickness, density, barrier ability, mechanical properties, water solubility and antioxidant activity of the composite films while inducing decreases in the brightness (p < 0.05), enhancing inter-molecular interactions of TSP + BLP composite films. The WVP, oxygen permeability and elongation at break of the composite film reached the minimum when BLP concentration was 3 % while exhibiting the highest tensile strength and the best performance. This composite film delayed microbial growth and minimized oxidative rancidity during chilled mutton storage, causing the improvement of its quality and extending its shelf life to 12 days. Therefore, TSP + BLP composite films possessed the promise to be applied as bioactive materials in food packaging sectors.
Asunto(s)
Brassica , Manihot , Polifenoles , Pectinas , Embalaje de Alimentos/métodos , Permeabilidad , Hojas de la Planta , AlmidónRESUMEN
Herein, we carefully investigated the Fe3+ doping effects on the structure and electron distribution of Cr2O3 nanoparticles using X-ray diffraction analysis (XRD), maximum entropy method (MEM), and density functional theory (DFT) calculations. We showed that increasing the Fe doping induces an enlargement in the axial ratio of c/a, which is associated with an anisotropic expansion of the unit cell. We found that as Fe3+ replaces Cr in the Cr2O3 lattice, it caused a higher interaction between the metal 3d states and the oxygen 2p states, which led to a slight increase in the Cr/Fe-O1 bond length followed by an opposite effect for the Cr/Fe-O2 bonds. Our results also suggest that the excitations characterize a well-localized bandgap region from occupied Cr d to unoccupied Fe d states. The Cr2O3 and Fe-doped Cr2O3 nanoparticles behave as Mott-Hubbard insulators due to their band gap being in the d-d gap, and Cr 3d orbitals dominate the conduction band. These findings suggest that the magnitude and the character of the electronic density near the O atom bonds in Cr2O3 nanoparticles are modulated by the Cr-Cr distances until its stabilization at the induced quasi-equilibrium of the Cr2O3 lattice when the Fe3+ doping values reaches the saturation level range.