Plasmonic dielectric antennas for hybrid optical nanotweezing and optothermoelectric manipulation of single nanosized extracellular vesicles.

This paper showcases an experimental demonstration of near-field optical trapping and dynamic manipulation of an individual extracellular vesicle. This is accomplished through the utilization of a plasmonic dielectric nanoantenna designed to support an optical anapole state-a non-radiating optical state resulting from the destructive interference between electric and toroidal dipoles in the far-field, leading to robust near-field enhancement. To further enhance the field intensity associated with the optical anapole state, a plasmonic mirror is incorporated, thereby boosting trapping capabilities. In addition to demonstrating near-field optical trapping, the study achieves dynamic manipulation of extracellular vesicles by harnessing the thermoelectric effect. This effect is induced in the presence of an ionic surfactant, cetyltrimethylammonium chloride (CTAC), combined with plasmonic heating. Furthermore, the thermoelectric effect improves trapping stability by introducing a wide and deep trapping potential. In summary, our hybrid plasmonic-dielectric trapping platform offers a versatile approach for actively transporting, stably trapping, and dynamically manipulating individual extracellular vesicles.

Correlation between Plasmonic and Thermal Properties of Metallic Nanoparticles.

Here, we investigate the correlation between the heat generated by gold nanoparticles, in particular nanospheres and nanobipyramids, and their plasmonic response manifested by the presence of Localized Surface Plasmon Resonances (LSPRs). Using a tunable laser and a thermal camera, we measure the temperature increase induced by colloidal nanoparticles in an aqueous solution as a function of the excitation wavelength in the optical regime. We demonstrate that the photothermal performances of the nanoparticles are strongly related not only to their plasmonic properties but also to the size and shape of the nanoparticles. The contribution of the longitudinal and transversal modes in gold nanobipyramids is also analyzed in terms of heat generation. These results will guide us to design appropriate nanoparticles to act as efficient heat nanosources.

Plasmonic Nanoparticles Boost Solar-to-Electricity Generation at Ambient Conditions.

Sunlight-to-electricity conversion using solar thermoelectric generators (STEGs) is a proven technology to meet our ever-growing energy demand. However, STEGs are often operated under a vacuum with customized thermoelectric materials to achieve high performance. In this work, the incorporation of plasmonic gold nanoparticle (AuNP) based solar absorbers enabled the efficient operation of STEGs under ambient conditions with commercially available thermoelectric devices. AuNPs enhanced the performance of STEG by ∼9 times, yielding an overall solar-to-electricity conversion efficiency of ∼9.6% under 7.5 W cm-2 solar irradiance at ambient conditions. Plasmonic heat dissipated by AuNPs upon solar irradiation was used as the thermal energy source for STEGs. High light absorptivity, photothermal conversion efficiency (∼95%), and thermal conductivity of AuNPs enabled the efficient generation and transfer of heat to STEGs, with minimal radiative and convective heat losses. The power generated from plasmon-powered STEGs is used to run electrical devices as well as produce green hydrogen via the electrolysis of water.

Thermometries for Single Nanoparticles Heated with Light.

The development of efficient nanoscale photon absorbers, such as plasmonic or high-index dielectric nanostructures, allows the remotely controlled release of heat on the nanoscale using light. These photothermal nanomaterials have found applications in various research and technological fields, ranging from materials science to biology. However, measuring the nanoscale thermal fields remains an open challenge, hindering full comprehension and control of nanoscale photothermal phenomena. Here, we review and discuss existent thermometries suitable for single nanoparticles heated under illumination. These methods are classified in four categories according to the region where they assess temperature: (1) the average temperature within a diffraction-limited volume, (2) the average temperature at the immediate vicinity of the nanoparticle surface, (3) the temperature of the nanoparticle itself, and (4) a map of the temperature around the nanoparticle with nanoscale spatial resolution. In the latter, because it is the most challenging and informative type of method, we also envisage new combinations of technologies that could be helpful in retrieving nanoscale temperature maps. Finally, we analyze and provide examples of strategies to validate the results obtained using different thermometry methods.

Probing Temperature-Induced Plasmonic Nonlinearity: Unveiling Opto-Thermal Effects on Light Absorption and Near-Field Enhancement.

Precise measurement and control of local heating in plasmonic nanostructures are vital for diverse nanophotonic devices. Despite significant efforts, challenges in understanding temperature-induced plasmonic nonlinearity persist, particularly in light absorption and near-field enhancement due to the absence of suitable measurement techniques. This study presents an approach allowing simultaneous measurements of light absorption and near-field enhancement through angle-resolved near-field scanning optical microscopy with iterative opto-thermal analysis. We revealed gold thin films exhibit sublinear nonlinearity in near-field enhancement due to nonlinear opto-thermal effects, while light absorption shows both sublinear and superlinear behaviors at varying thicknesses. These observations align with predictions from a simple harmonic oscillation model, in which changes in damping parameters affect light absorption and field enhancement differently. The sensitivity of our method was experimentally examined by measuring the opto-thermal responses of three-dimensional nanostructure arrays. Our findings have direct implications for advancing plasmonic applications, including photocatalysis, photovoltaics, photothermal effects, and surface-enhanced Raman spectroscopy.

Biological Applications of Thermoplasmonics.

Thermoplasmonics has emerged as an extraordinarily versatile tool with profound applications across various biological domains ranging from medical science to cell biology and biophysics. The key feature of nanoscale plasmonic heating involves remote activation of heating by applying laser irradiation to plasmonic nanostructures that are designed to optimally convert light into heat. This unique capability paves the way for a diverse array of applications, facilitating the exploration of critical biological processes such as cell differentiation, repair, signaling, and protein functionality, and the advancement of biosensing techniques. Of particular significance is the rapid heat cycling that can be achieved through thermoplasmonics, which has ushered in remarkable technical innovations such as accelerated amplification of DNA through quantitative reverse transcription polymerase chain reaction. Finally, medical applications of photothermal therapy have recently completed clinical trials with remarkable results in prostate cancer, which will inevitably lead to the implementation of photothermal therapy for a number of diseases in the future. Within this review, we offer a survey of the latest advancements in the burgeoning field of thermoplasmonics, with a keen emphasis on its transformative applications within the realm of biosciences.

Thermoplasmonic Controlled Optical Absorber Based on a Liquid Crystal Metasurface.

Metasurfaces can be realized by organizing subwavelength elements (e.g., plasmonic nanoparticles) on a reflective surface covered with a dielectric layer. Such an array of resonators, acting collectively, can completely absorb the resulting resonant wavelength. Unfortunately, despite the excellent optical properties of metasurfaces, they lack the tunability to perform as adaptive optical components. To boost the utilization of metasurfaces and realize a new generation of dynamically controlled optical components, we report our recent finding based on the powerful combination of an innovative metasurface-optical absorber and nematic liquid crystals (NLCs). The metasurface consists of self-assembled silver nanocubes (AgNCs) immobilized on a 50 nm thick gold layer by using a polyelectrolyte multilayer as a dielectric spacer. The resulting optical absorbers show a well-defined reflection band centered in the near-infrared of the electromagnetic spectrum (750-770 nm), a very high absorption efficiency (∼60%) at the resonant wavelength, and an elevated photothermal efficiency estimated from the time constant value (34 s). Such a metasurface-based optical absorber, combined with an NLC layer, planarly aligned via a photoaligned top cover glass substrate, shows homogeneous NLC alignment and an absorption band photothermally tunable over approximately 46 nm. Detailed thermographic studies and spectroscopic investigations highlight the extraordinary capability of the active metasurface to be used as a light-controllable optical absorber.

Nanothermometry-Enabled Intelligent Laser Tissue Soldering.

While often life-saving, surgical resectioning of diseased tissues puts patients at risk for post-operative complications. Sutures and staples are well-accepted and routinely used to reconnect tissues, however, their mechanical mismatch with biological soft tissue and invasiveness contribute to wound healing complications, infections, and post-operative fluid leakage. In principle, laser tissue soldering offers an attractive, minimally-invasive alternative for seamless soft tissue fusion. However, despite encouraging experimental observations, including accelerated healing and lowered infection risk, critical issues related to temperature monitoring and control during soldering and associated complications have prevented their clinical exploitation to date. Here, intelligent laser tissue soldering (iSoldering) with integrated nanothermometry is introduced as a promising yet unexplored approach to overcome the critical shortcomings of laser tissue soldering. It demonstrates that adding thermoplasmonic and nanothermometry nanoparticles to proteinaceous solders enables heat confinement and non-invasive temperature monitoring and control, offering a route to high-performance, leak-tight tissue sealing even at deep tissue sites. The resulting tissue seals exhibit excellent mechanical properties and resistance to chemically-aggressive digestive fluids, including gastrointestinal juice. The iSolder can be readily cut and shaped by surgeons to optimally fit the tissue defect and can even be applied using infrared light from a medically approved light source, hence fulfilling key prerequisites for application in the operating theatre. Overall, iSoldering enables reproducible and well-controlled high-performance tissue sealing, offering new prospects for its clinical exploitation in diverse fields ranging from cardiovascular to visceral and plastic surgery.

Light-Driven Self-Oscillation of Thermoplasmonic Nanocolloids.

Self-oscillation-the periodic change of a system under a non-periodic stimulus-is vital for creating low-maintenance autonomous devices in soft robotics technologies. Soft composites of macroscopic dimensions are often doped with plasmonic nanoparticles to enhance energy dissipation and generate periodic response. However, while it is still unknown whether a dispersion of photonic nanocrystals may respond to light as a soft actuator, a dynamic analysis of nanocolloids self-oscillating in a liquid is also lacking. This study presents a new self-oscillator model for illuminated colloidal systems. It predicts that the surface temperature of thermoplasmonic nanoparticles and the number density of their clusters jointly oscillate at frequencies ranging from infrasonic to acoustic values. New experiments with spontaneously clustering gold nanorods, where the photothermal effect alters the interplay of light (stimulus) with the disperse system on a macroscopic scale, strongly support the theory. These findings enlarge the current view on self-oscillation phenomena and anticipate the colloidal state of matter to be a suitable host for accommodating light-propelled machineries. In broad terms, a complex system behavior is observed, which goes from periodic solutions (Hopf-Poincaré-Andronov bifurcation) to a new dynamic attractor driven by nanoparticle interactions, linking thermoplasmonics to nonlinearity and chaos.

Light-Controlled Multiphase Structuring of Perovskite Crystal Enabled by Thermoplasmonic Metasurface.

Halide perovskites belong to an important family of semiconducting materials with electronic properties that enable a myriad of applications, especially in photovoltaics and optoelectronics. Their optical properties, including photoluminescence quantum yield, are affected and notably enhanced at crystal imperfections where the symmetry is broken and the density of states increases. These lattice distortions can be introduced through structural phase transitions, allowing charge gradients to appear near the interfaces between phase structures. In this work, we demonstrate controlled multiphase structuring in a single perovskite crystal. The concept uses cesium lead bromine (CsPbBr3) placed on a thermoplasmonic TiN/Si metasurface and enables single-, double-, and triple-phase structures to form on demand above room temperature. This approach promises application horizons of dynamically controlled heterostructures with distinctive electronic and enhanced optical properties.

Real-Time Optical Measurements of Nanoparticle-Induced Melting and Resolidification Dynamics.

The photothermally induced nanoscale dynamics of rapid melting and resolidification of a thin layer of molecular material surrounding a nanoparticle is examined in real time by an all-optical approach. The method employs pulsed periodic modulation of the medium's dielectric constant through absorption of a low-duty-cycle laser pulse train by a single nanoparticle that acts as a localized heating source. Interpretation of experimental data, including inference of a phase change and of the liquid/solid interface dynamics, is obtained by comparing experimental data with results from coupled optical-thermal numerical simulations. The combined experimental/computational workflow presented in this proof-of-principle study will enable future explorations of material parameters at nanoscale, which are often different from their bulk values and in many cases difficult to infer from macroscopic measurements.

Selecting High-Performance Gold Nanorods for Photothermal Conversion.

In this work, we establish a new paradigm on identifying optimal arbitrarily shaped metallic nanostructures for photothermal applications. Crucial thermo-optical parameters that rule plasmonic heating are appraised, exploring a nanoparticle size-dependence approach. Our results indicate two distinct figures of merit for the optimization of metallic nanoheaters, under both non-cumulative femtosecond and continuum laser excitation. As a case study, gold nanorods are evaluated for infrared photothermal conversion in water, and the influence of the particle length and diameter are depicted. For non-cumulative femtosecond pulses, efficient photothermal conversion is observed for gold nanorods of small volumes. For continuous wave (CW) excitation at 800 nm and 1064 nm, the optimal gold nanorod dimensions (in water) are, respectively, 90 × 25nm and 150 × 30 nm. Figure of Merit (FoM) variations up to 700% were found considering structures with the same peak wavelength. The effect of collective heating is also appraised. The designing of high-performance plasmonic nanoparticles, based on quantifying FoM, allows a rational use of nanoheaters for localized photothermal applications.

Thermoplasmonics Decontamination of Respirators Face Masks Using Silver Nanoparticles: A New Weapon in the Fight Against COVID-19 Pandemic.

The current COVID-19 pandemic has resulted in an urgent need for methods to decontaminate respirators masks for reuse while keeping them intact and functional. The severe shortage of professional masks such as N95 and FFP2 has necessitated their reuse over long periods. A very promising method is the pasteurization of these masks by thermoplasmonic heat generated by plasmonics nanoparticles when they are irradiated by light. Under illumination at its plasmonic resonance, a metal nanoparticle features enhanced light absorption, turning it into an ideal nano-source of heat, remotely controllable using light. In this work, we propose a numerical study based on the finite element method (FEM) of the thermoplasmonic properties of silver nanoparticles (AgNPs) decorating polypropylene (PP) fibers which is a basic material for the manufacture of these masks. The surface plasmon resonance (SPR) of these nanostructures was investigated through the computation of the complex effective dielectric permittivity and the absorption cross section in the near UV-visible (NUV-Vis) range. First, the SPR characteristics of AgNPs for different morphologies are determined from the absorption spectra, including the SPR-peak position λmax and the electric field enhancement. Second, we determine the power absorbed by an individual AgNP of different morphologies. From this, we calculate the internal temperature increase of the particle at the plasmonic resonance. The last step is devoted to the determination of the temperature profile in the surrounding medium in order to better understand and design the plasmon-assisted heating processes at the nanometric scale.

All-Optical Tunability of Metalenses Permeated with Liquid Crystals.

Metasurfaces have been extensively engineered to produce a wide range of optical phenomena, allowing exceptional control over the propagation of light. However, they are generally designed as single-purpose devices without a modifiable postfabrication optical response, which can be a limitation to real-world applications. In this work, we report a nanostructured planar-fused silica metalens permeated with a nematic liquid crystal (NLC) and gold nanoparticle solution. The physical properties of embedded NLCs can be manipulated with the application of external stimuli, enabling reconfigurable optical metasurfaces. We report the all-optical, dynamic control of the metalens optical response resulting from thermoplasmonic-induced changes of the NLC solution associated with the nematic-isotropic phase transition. A continuous and reversible tuning of the metalens focal length is experimentally demonstrated, with a variation of 80 µm (0.16% of the 5 cm nominal focal length) along the optical axis. This is achieved without direct mechanical or electrical manipulation of the device. The reconfigurable properties are compared with corroborating numerical simulations of the focal length shift and exhibit close correspondence.

NiSe and CoSe Topological Nodal-Line Semimetals: A Sustainable Platform for Efficient Thermoplasmonics and Solar-Driven Photothermal Membrane Distillation.

The control of heat at the nanoscale via the excitation of localized surface plasmons in nanoparticles (NPs) irradiated with light holds great potential in several fields (cancer therapy, catalysis, desalination). To date, most thermoplasmonic applications are based on Ag and Au NPs, whose cost of raw materials inevitably limits the scalability for industrial applications requiring large amounts of photothermal NPs, as in the case of desalination plants. On the other hand, alternative nanomaterials proposed so far exhibit severe restrictions associated with the insufficient photothermal efficacy in the visible, the poor chemical stability, and the challenging scalability. Here, it is demonstrated the outstanding potential of NiSe and CoSe topological nodal-line semimetals for thermoplasmonics. The anisotropic dielectric properties of NiSe and CoSe activate additional plasmonic resonances. Specifically, NiSe and CoSe NPs support multiple localized surface plasmons in the optical range, resulting in a broadband matching with sunlight radiation spectrum. Finally, it is validated the proposed NiSe and CoSe-based thermoplasmonic platform by implementing solar-driven membrane distillation by adopting NiSe and CoSe nanofillers embedded in a polymeric membrane for seawater desalination. Remarkably, replacing Ag with NiSe and CoSe for solar membrane distillation increases the transmembrane flux by 330% and 690%, respectively. Correspondingly, costs of raw materials are also reduced by 24 and 11 times, respectively. The results pave the way for the advent of NiSe and CoSe for efficient and sustainable thermoplasmonics and related applications exploiting sunlight within the paradigm of the circular blue economy.

Invisible Thermoplasmonic Indium Tin Oxide Nanoparticle Ink for Anti-counterfeiting Applications.

In this study, we present a thermoplasmonic transparent ink based on a colloidal dispersion of indium tin oxide (ITO) nanoparticles, which can offer several advantages as anti-counterfeiting technology. The custom ink could be directly printed on several substrates, and it is transparent under visible light but is able to generate heat by absorption of NIR radiation. Dynamic temperature mapping of the printed motifs was performed by using a thermal camera while irradiating the samples with an IR lamp. The printed samples presented fine features (in the order of 75 µm) and high thermal resolution (of about 250 µm). The findings are supported by thermal finite-element simulations, which also allow us to explore the effect of different substrate characteristics on the thermal readout. Finally, we built a demonstrator comprising a QR Code invisible to the naked eye, which became visible in thermal images under NIR radiation. The high transparency of the printed ink and the high speed of the thermal reading (figures appear/disappear in less than 1 s) offer an extremely promising strategy toward low-cost, scalable production of photothermally active invisible labels.

Au-Ag Alloy Nanocorals with Optimal Broadband Absorption for Sunlight-Driven Thermoplasmonic Applications.

Noble metal nanoparticles are efficient converters of light into heat but typically cover a limited spectral range or have intense light scattering, resulting in unsuited for broadband thermoplasmonic applications and sunlight-driven heat generation. Here, Au-Ag alloy nanoparticles were deliberately molded with an irregular nanocoral (NC) shape to obtain broadband plasmon absorption from the visible to the near-infrared yet at a lower cost compared to pure Au nanostructures. The Au-Ag NCs are produced through a green and scalable methodology that relies on pulsed laser fragmentation in a liquid, without chemicals or capping molecules, leaving the particles surface free for conjugation with thiolated molecules and enabling full processability and easy inclusion in various matrixes. Numerical calculations showed that panchromism, i.e., the occurrence of a broadband absorption from the visible to the near-infrared region, is due to the special morphology of Au-Ag alloy NCs and consists of a purely absorptive behavior superior to monometallic Au or Ag NCs. The thermoplasmonic properties were assessed by multiwavelength light-to-heat conversion experiments and exploited for the realization of a cellulose-based solar-steam generation device with low-cost, simple design but competitive performances. Overall, here it is shown how laser light can be used to harvest solar light. Besides, the optimized broadband plasmon absorption, the green synthetic procedure, and the other set of positive features for thermoplasmonic applications of Au-Ag NCs will contribute to the development of environmentally friendly devices of practical utility in a sustainable world.

Thermoplasmonics in Solar Energy Conversion: Materials, Nanostructured Designs, and Applications.

The indispensable requirement for sustainable development of human society has forced almost all countries to seek highly efficient and cost-effective ways to harvest and convert solar energy. Though continuous progress has advanced, it remains a daunting challenge to achieve full-spectrum solar absorption and maximize the conversion efficiency of sunlight. Recently, thermoplasmonics has emerged as a promising solution, which involves several beneficial effects including enhanced light absorption and scattering, generation and relaxation of hot carriers, as well as localized/collective heating, offering tremendous opportunities for optimized energy conversion. Besides, all these functionalities can be tailored via elaborated designs of materials and nanostructures. Here, first the fundamental physics governing thermoplasmonics is presented and then the strategies for both material selection and nanostructured designs toward more efficient energy conversion are summarized. Based on this, recent progress in thermoplasmonic applications including solar evaporation, photothermal chemistry, and thermophotovoltaic is reviewed. Finally, the corresponding challenges and prospects are discussed.

Study of the Optical and Thermoplasmonics Properties of Gold Nanoparticle Embedded in Al2O3 Matrix.

In this paper, the optical and thermoplasmonics properties of nanocomposites consisting of spherical gold nanoparticles (AuNPs) integrated in Al 2 O 3 matrix are determined using the Finite Element Method (FEM). Firstly, the refractive index ( n ) , extinction coefficient ( κ ) , absorption coefficient ( µ a ) , and optical conductivity ( σ ) are calculated from the effective complex permittivity obtained by solving the Laplace's equation for different size and concentration of nanoparticles. The surface plasmon resonance (SPR) properties of AuNPs are optimized from the peak presented in the absorption coefficient spectrum. The results show that the optical parameters n , κ , µ a , and σ undergo a strong variation around the wavelength λ max corresponding to the SPR phenomenon. The value of λ max increases from 560 to 600 n m when the radius of the particles varies between r = 5 and r = 30 n m . The effect of the AuNP concentration on the band gap energy E g ( e V ) of Au- Al 2 O 3 nanocomposites is also studied, a shift from E g = 5.34 to E g = 5.49 e V is observed when the concentration of the AuNPs increases from 0 to 0.82 % . The electric field enhancement induced by the AuNPs at plasmonic resonance is also determined depending to the particle size; the results show that the enhancement factor increases from g = 4.71 to g = 6.95 when the radius of the AuNPs increases from r = 5 to 30 n m . The thermal dissipation of the plasmonic energy of spherical of our system dispersed in the Al 2 O 3 matrix is determined considering the Joule effect which occurs by the oscillation of the charges at the plasmonic resonance. The generated thermal power by particles is calculated for different sizes, which allows to calculate the thermal power per gram of particles depending on the intensity of the incident electric field. The results show that the plasmonic thermal power is almost identical for small particles when the radius is less than r = 15 n m and increases considerably when the size increases from r = 15 to 30 n m . For a fixed size and incident field amplitude, we calculated the temperature change in the nanocomposites Au- Al 2 O 3 depending of time for different particle concentrations; the temperature variation curves obtained are linear as a function of time.

Mechanistic Understanding of DNA Denaturation in Nanoscale Thermal Gradients Created by Femtosecond Excitation of Gold Nanoparticles.

There is significant interest in developing photothermal systems that can precisely control the structure and function of biomolecules through local temperature modulation. One specific application is the denaturation of double-stranded (ds) DNA through femtosecond (fs) laser pulse optical heating of gold nanoparticles (AuNPs); however, the mechanism of DNA melting in these systems is not fully understood. Here, we utilize 55 nm AuNPs with surface-tethered dsDNA, which are locally heated using fs laser pulses to induce DNA melting. By varying the dsDNA distance from the AuNP surface and the laser pulse energy fluence, this system is used to study how the nanosecond duration temperature increase and the steep temperature gradient around the AuNP affect dsDNA dehybridization. Through modifying the distance between the dsDNA and AuNP surface by 3.8 nm in total and the pulse energy fluence from 7.1 to 14.1 J/m2, the dehybridization rates ranged from 0.002 to 0.05 DNA per pulse, and the total amount of DNA released into solution was controlled over a range of 26-93% in only 100 s of irradiation. By shifting the dsDNA position as little as ∼1.1 nm, the average dsDNA dehybridization rate is altered up to 30 ± 2%, providing a high level of control over DNA melting and release. By comparing the theoretical temperature around the dsDNA to the experimentally derived temperature, we find that maximum or peak temperatures have a greater influence on the dehybridization rate when the dsDNA is closer to the AuNP surface and when lower laser pulse fluences are used. Furthermore, molecular dynamics simulations mimicking the photothermal heat pulse around a AuNP provide mechanistic insight into the stochastic nature of dehybridization and demonstrate increased base pair separation near the AuNP surface during laser pulse heating when compared to steady-state heating. Understanding how biological materials respond to the short-lived and non-uniform temperature increases innate to fs laser pulse optical heating of AuNPs is critical to improving the functionality and precision of this technique so that it may be implemented into more complex biological systems.