EAIA: An Efficient and Anonymous Identity-Authentication Scheme in 5G-V2V.

Vehicle Ad-hoc Networks (VANETs) have experienced significant development in recent years, playing a crucial role in enhancing the driving experience by enabling safer and more efficient inter-vehicle interactions through information exchange. Vehicle-to-Vehicle (V2V) communication is particularly vital as it not only helps to prevent collisions and improve traffic efficiency but also provides essential situational awareness to drivers or autonomous driving systems. Communication is typically supported by roadside units (RSUs); however, in practical applications, vehicles may exceed the communication range of RSUs, thus exposing them to various malicious attacks. Additionally, considering the limited computational resources of onboard units (OBUs) in vehicles, there is a high demand for designing lightweight security protocols that support V2V communication. To address this issue, this paper proposes an efficient anonymous V2V identity-authentication protocol tailored for scenarios that lack RSU support. The proposed protocol was formally assessed using the Scyther tool, demonstrating its capability to withstand major typical malicious attacks. Performance evaluations indicate that the proposed protocol is efficient in terms of communication and computational overhead, making it a viable solution for V2V communication.

Addressing Multi-User Interference in Vehicular Visible Light Communications: A Brief Survey and an Evaluation of Optical CDMA MAC Utilization in a Multi-Lane Scenario.

Visible Light Communications (VLC) are developing as an omnipresent solution for inter-vehicle communications. Based on intensive research efforts, the performance of vehicular VLC systems has significantly improved in terms of noise resilience, communication range, and latencies. Nevertheless, in order to be ready for deployment in real applications, solutions for Medium Access Control (MAC) are also required. In this context, this article provides an intensive evaluation of several optical CDMA MAC solutions and of their efficiency in mitigating the effect of Multiple User Interference (MUI). Intensive simulation results showed that an adequately designed MAC layer can significantly reduce the effects of MUI, ensuring an adequate Packet Delivery Ratio (PDR). The simulation results showed that based on the use of optical CDMA codes, the PDR can be improved from values as low as 20% up to values between 93.2% and 100%. Consequently, the results provided in this article show the high potential of optical CDMA MAC solutions in vehicular VLC applications, reconfirm the high potential of the VLC technology in inter-vehicle communications, and emphasize the need to further develop MAC solutions designed for such applications.

Increasing Vehicular Visible Light Communications Range Based on LED Current Overdriving and Variable Pulse Position Modulation: Concept and Experimental Validation.

Due to its unique advantages, the integration of Visible Light Communications (VLC) in vehicle safety applications has become a major research topic. Nevertheless, as this is an emergent technology, several challenges must be addressed. One of the most important of these challenges is oriented toward increasing vehicular VLC systems' communication range. In this context, this article proposes a novel approach that provides a significant communication distance enhancement. Different from most existing works on this topic, which are based on refining the VLC receiver, this new article is focused on improving the VLC system based on the benefits that can be achieved through the VLC transmitter. The concept is based on Light-Emitting Diode (LED) current overdriving and a modified Variable Pulse Position Modulation (VPPM). Therefore, LED current overdriving provides the VLC receiver higher instantaneous received optical power and improved Signal-to-Noise Ratio (SNR), whereas the use of the VPPM ensures that the VLC transmitter respects eye regulation norms and offers LED protection against overheating. The concept has been experimentally tested in laboratory conditions. The experimental results confirmed the viability of the concept, showing an increase of the communication range by up to 370%, while maintaining the same overall optical irradiance at the VLC transmitter level. Therefore, this new approach has the potential to enable vehicular VLC ranges that cover the requirements of communication-based vehicle safety applications. To the best of our knowledge, this concept has not been previously exploited in vehicular VLC applications.

RIS-Assisted Hybrid Beamforming and Connected User Vehicle Localization for Millimeter Wave MIMO Systems.

A reconfigurable intelligent surface (RIS) is a type of metasurface that can dynamically control the reflection and transmission of electromagnetic waves, such as radio waves, by changing its physical properties. Recently, RISs have played an important role in intelligently reshaping wireless propagation environments to improve the received signal gain as well as spectral efficiency performance. In this paper, we consider a millimeter wave (mmWave) vehicle-to-vehicle (V2V) multiple-input multiple-output (MIMO) system in which, an RIS is deployed to aid downlink V2V data transmission. In particular, the line-of-sight path of the mmWave system is affected by blockages, resulting in higher signaling overhead. Thus, the system performance may suffer due to interruptions caused by static or mobile blockers, such as buildings, trees, vehicles, and pedestrians. In this paper, we propose an RIS-assisted hybrid beamforming scheme for blockage-aware mmWave V2V MIMO systems to increase communication service coverage. First, we propose a conjugate gradient and location-based hybrid beamforming (CG-LHB) algorithm to solve the user sub-rate maximization problem. We then propose a double-step iterative algorithm that utilizes an error covariance matrix splitting method to minimize the effect of location error on the passive beamforming. The proposed algorithms perform quite well when the channel uncertainty is smaller than 10%. Finally, the simulation results validate the proposed CG-LHB algorithm in terms of the RIS-assisted equivalent channel for mmWave V2V MIMO communications.

Air Corridors: Concept, Design, Simulation, and Rules of Engagement.

Air corridors are an integral part of the advanced air mobility infrastructure. They are the virtual highways in the sky for the transportation of people and cargo in a controlled airspace at an altitude of around 1000 ft. to 2000 ft. above ground level. These corridors will be utilized by (unmanned) air taxis, which will be deployed in rural and metropolitan regions to carry passengers and freight, as well as air ambulances, which will be deployed to offer first responder services such as 911 emergencies. This paper presents fundamental insights into the design of air corridors with high operational efficiency as well as zero collisions. It begins with the definitions of air cube, skylane or track, intersection, vertiport, gate, and air corridor. Then a multi-layered air corridor model is proposed. Traffic at intersections is analyzed in detail with examples of vehicles turning in different directions. The concept of capacity of an air corridor is introduced along with the nature of distribution of locations of vehicles in the air corridor and collision probability inside the corridor are discussed. Finally, results of traffic flow simulations are presented.

Analysis and Experimental Investigation of the Light Dimming Effect on Automotive Visible Light Communications Performances.

The use of Visible Light Communications (VLC) in vehicular applications has become a major research area due to its simplicity, high performance to cost ratio, and great deployment potential. In this context, this article provides one of the very few analyses and experimental evaluations concerning the integration of a light dimming function in vehicular VLC systems. For this purpose, a vehicle-to-vehicle VLC prototype has been implemented and used to evaluate the systems' communication performances in light dimming conditions, while decreasing the duty cycle from 40% to 1%, and increasing the communication range from 1 to 40-50 m. The experimental results showed that in normal lighting conditions, the VLC technology can easily support low duty cycle light dimming for ranges up to 40 m, while maintaining a 10-6 BER. Nevertheless, in strong optical noise conditions, when the system reaches its SNR limit, the communication range can decrease by half, whereas the BER can increase by 2-4 orders of magnitude. This article provides consistent evidence concerning the high potential of the VLC technology to support inter-vehicle communication links, even in light dimming conditions.

Evaluation of Misalignment Effect in Vehicle-to-Vehicle Visible Light Communications: Experimental Demonstration of a 75 Meters Link.

The use of visible light communications technology in communication-based vehicle applications is gaining more and more interest as the research community is constantly overcoming challenge after challenge. In this context, this article addresses the issues associated with the use of Visible Light Communications (VLC) technology in Vehicle-to-Vehicle (V2V) communications, while focusing on two crucial issues. On the one hand, it aims to investigate the achievable communication distance in V2V applications while addressing the least favorable case, namely the one when a standard vehicle rear lighting system is used as a VLC emitter. On the other hand, this article investigates another highly unfavorable use case scenario, i.e., the case when two vehicles are located on adjacent lanes, rather than on the same lane. In order to evaluate the compatibility of the VLC technology with the usage in inter-vehicle communication, a VLC prototype is intensively evaluated in outdoor conditions. The experimental results show a record V2V VLC distance of 75 m, while providing a Bit Error Ratio (BER) of 10-7-10-6. The results also show that the VLC technology is able to provide V2V connectivity even in a situation where the vehicles are located on adjacent lanes, without a major impact on the link performances. Nevertheless, this situation generates an initial no-coverage zone, which is determined by the VLC receiver reception angle, whereas in some cases, vehicle misalignment can generate a BER increase that can go up to two orders of magnitude.

BEAT: Beacon Inter-Reception Time Ensured Adaptive Transmission for Vehicle-to-Vehicle Safety Communication.

To improve vehicle safety, vehicular ad hoc networks (VANETs) periodically broadcast safety messages known as beacons. Consequently, it becomes safety critical to guarantee the timely reception of periodic beacons under the time-varying environments of VANET. However, existing approaches typically measure the packet delivery ratio, which is a time-average metric that does not consider the temporal behavior associated with beacon reception. In this paper, to properly reflect the temporal aspect of beacon reception, we propose a congestion control algorithm, Beacon inter-reception time Ensured Adaptive Transmission (BEAT). The proposed algorithm tightly regulates the beacon inter-reception time compared to conventional techniques, which can significantly improve vehicle safety. Our simulation results demonstrate the effectiveness of the proposed scheme.

Adjacent Vehicle Number-Triggered Adaptive Transmission for V2V Communications.

For vehicle-to-vehicle (V2V) communication, such issues as continuity and reliability still have to be solved. Specifically, it is necessary to consider a more scalable physical layer due to the high-speed mobility of vehicles and the complex channel environment. Adaptive transmission has been adapted in channel-dependent scheduling. However, it has been neglected with regards to the physical topology changes in the vehicle network. In this paper, we propose a physical topology-triggered adaptive transmission scheme which adjusts the data rate between vehicles according to the number of connectable vehicles nearby. Also, we investigate the performance of the proposed method using computer simulations and compare it with the conventional methods. The numerical results show that the proposed method can provide more continuous and reliable data transmission for V2V communications.

The real-world safety potential of connected vehicle technology.

OBJECTIVE: This article estimates the safety potential of a current commercially available connected vehicle technology in real-world crashes. METHOD: Data from the Centre for Automotive Safety Research's at-scene in-depth crash investigations in South Australia were used to simulate the circumstances of real-world crashes. A total of 89 crashes were selected for inclusion in the study. The crashes were selected as representative of the most prevalent crash types for injury or fatal crashes and had potential to be mitigated by connected vehicle technology. The trajectory, speeds, braking, and impact configuration of the selected in-depth cases were replicated in a software package and converted to a file format allowing "replay" of the scenario in real time as input to 2 Cohda Wireless MK2 onboard units. The Cohda Wireless onboard units are a mature connected vehicle technology that has been used in both the German simTD field trial and the U.S. Department of Transport's Safety Pilot project and have been tuned for low false alarm rates when used in the real world. The crash replay was achieved by replacing each of the onboard unit Global Positioning System (GPS) inputs with the simulated data of each of the involved vehicles. The time at which the Cohda Wireless threat detection software issued an elevated warning was used to calculate a new impact speed using 3 different reaction scenarios and 2 levels of braking. RESULTS: It was found that between 37 and 86% of the simulated crashes could be avoided, with highest percentage due a fully autonomous system braking at 0.7 g. The same system also reduced the impact speed relative to the actual crash in all cases. Even when a human reaction time of 1.2 s and moderate braking of 0.4 g was assumed, the impact speed was reduced in 78% of the crashes. Crash types that proved difficult for the threat detection engine were head-on crashes where the approach angle was low and right turn-opposite crashes. CONCLUSIONS: These results indicate that connected vehicle technology can be greatly beneficial in real-world crash scenarios and that this benefit would be maximized by having the vehicle intervene autonomously with heavy braking. The crash types that proved difficult for the connected vehicle technology could be better addressed if controller area network (CAN) information is available, such as steering wheel angle, so that driver intent can be inferred sooner. More accurate positioning in the real world (e.g., combining satellite positioning and accelerometer data) would allow the technology to be more effective for near-collinear head-on and rear-end crashes, because the low approach angles that are common in such crashes are currently ignored in order to minimize false alarms due to positioning uncertainty.